diff options
Diffstat (limited to 'drivers/mtd/spi/spi_flash.c')
| -rw-r--r-- | drivers/mtd/spi/spi_flash.c | 172 |
1 files changed, 172 insertions, 0 deletions
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c new file mode 100644 index 0000000000..6a3ec89f55 --- /dev/null +++ b/drivers/mtd/spi/spi_flash.c @@ -0,0 +1,172 @@ +/* + * SPI flash interface + * + * Copyright (C) 2008 Atmel Corporation + */ +#include <common.h> +#include <malloc.h> +#include <spi.h> +#include <spi_flash.h> + +#include "spi_flash_internal.h" + +int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len) +{ + unsigned long flags = SPI_XFER_BEGIN; + int ret; + + if (len == 0) + flags |= SPI_XFER_END; + + ret = spi_xfer(spi, 8, &cmd, NULL, flags); + if (ret) { + debug("SF: Failed to send command %02x: %d\n", cmd, ret); + return ret; + } + + if (len) { + ret = spi_xfer(spi, len * 8, NULL, response, SPI_XFER_END); + if (ret) + debug("SF: Failed to read response (%zu bytes): %d\n", + len, ret); + } + + return ret; +} + +int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd, + size_t cmd_len, void *data, size_t data_len) +{ + unsigned long flags = SPI_XFER_BEGIN; + int ret; + + if (data_len == 0) + flags |= SPI_XFER_END; + + ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags); + if (ret) { + debug("SF: Failed to send read command (%zu bytes): %d\n", + cmd_len, ret); + } else if (data_len != 0) { + ret = spi_xfer(spi, data_len * 8, NULL, data, SPI_XFER_END); + if (ret) + debug("SF: Failed to read %zu bytes of data: %d\n", + data_len, ret); + } + + return ret; +} + +int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len, + const void *data, size_t data_len) +{ + unsigned long flags = SPI_XFER_BEGIN; + int ret; + + if (data_len == 0) + flags |= SPI_XFER_END; + + ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags); + if (ret) { + debug("SF: Failed to send read command (%zu bytes): %d\n", + cmd_len, ret); + } else if (data_len != 0) { + ret = spi_xfer(spi, data_len * 8, data, NULL, SPI_XFER_END); + if (ret) + debug("SF: Failed to read %zu bytes of data: %d\n", + data_len, ret); + } + + return ret; +} + + +int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd, + size_t cmd_len, void *data, size_t data_len) +{ + struct spi_slave *spi = flash->spi; + int ret; + + spi_claim_bus(spi); + ret = spi_flash_cmd_read(spi, cmd, cmd_len, data, data_len); + spi_release_bus(spi); + + return ret; +} + +struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int spi_mode) +{ + struct spi_slave *spi; + struct spi_flash *flash; + int ret; + u8 idcode[3]; + + spi = spi_setup_slave(bus, cs, max_hz, spi_mode); + if (!spi) { + debug("SF: Failed to set up slave\n"); + return NULL; + } + + ret = spi_claim_bus(spi); + if (ret) { + debug("SF: Failed to claim SPI bus: %d\n", ret); + goto err_claim_bus; + } + + /* Read the ID codes */ + ret = spi_flash_cmd(spi, CMD_READ_ID, &idcode, sizeof(idcode)); + if (ret) + goto err_read_id; + + debug("SF: Got idcode %02x %02x %02x\n", idcode[0], + idcode[1], idcode[2]); + + switch (idcode[0]) { +#ifdef CONFIG_SPI_FLASH_SPANSION + case 0x01: + flash = spi_flash_probe_spansion(spi, idcode); + break; +#endif +#ifdef CONFIG_SPI_FLASH_ATMEL + case 0x1F: + flash = spi_flash_probe_atmel(spi, idcode); + break; +#endif +#ifdef CONFIG_SPI_FLASH_WINBOND + case 0xef: + flash = spi_flash_probe_winbond(spi, idcode); + break; +#endif +#ifdef CONFIG_SPI_FLASH_STMICRO + case 0x00: + case 0xff: + flash = spi_flash_probe_stmicro(spi, idcode); + break; +#endif + default: + debug("SF: Unsupported manufacturer %02X\n", idcode[0]); + flash = NULL; + break; + } + + if (!flash) + goto err_manufacturer_probe; + + spi_release_bus(spi); + + return flash; + +err_manufacturer_probe: +err_read_id: + spi_release_bus(spi); +err_claim_bus: + spi_free_slave(spi); + return NULL; +} + +void spi_flash_free(struct spi_flash *flash) +{ + spi_free_slave(flash->spi); + free(flash); +} |