diff options
Diffstat (limited to 'drivers/serial_pl010.c')
| -rw-r--r-- | drivers/serial_pl010.c | 189 |
1 files changed, 93 insertions, 96 deletions
diff --git a/drivers/serial_pl010.c b/drivers/serial_pl010.c index 01b5f0aafd..7ff4b85c35 100644 --- a/drivers/serial_pl010.c +++ b/drivers/serial_pl010.c @@ -41,137 +41,134 @@ #define NUM_PORTS 2 #define CONSOLE_PORT CONFIG_CONS_INDEX #define baudRate CONFIG_BAUDRATE -static volatile unsigned char * const port[NUM_PORTS] = {(void*)(CFG_SERIAL0), - (void*)(CFG_SERIAL1)}; +static volatile unsigned char *const port[NUM_PORTS] = { + (void *) (CFG_SERIAL0), + (void *) (CFG_SERIAL1) +}; -static void pl010_putc(int portnum, char c); -static int pl010_getc(int portnum); -static int pl010_tstc(int portnum); +static void pl010_putc (int portnum, char c); +static int pl010_getc (int portnum); +static int pl010_tstc (int portnum); int serial_init (void) { - unsigned int temp; - unsigned int divisor; - - /* - ** First, disable everything. - */ - IO_WRITE(port[CONSOLE_PORT] + UART_PL010_CR, 0x0); - - /* - ** Set baud rate - ** - */ - switch (baudRate) { - case 9600: - divisor = UART_PL010_BAUD_9600; - break; - - case 19200: - divisor = UART_PL010_BAUD_9600; - break; - - case 38400: - divisor = UART_PL010_BAUD_38400; - break; - - case 57600: - divisor = UART_PL010_BAUD_57600; - break; - - case 115200: - divisor = UART_PL010_BAUD_115200; - break; - - default: - divisor = UART_PL010_BAUD_38400; - } - - IO_WRITE(port[CONSOLE_PORT] + UART_PL010_LCRM, ((divisor & 0xf00) >> 8)); - IO_WRITE(port[CONSOLE_PORT] + UART_PL010_LCRL, (divisor & 0xff)); - - /* - ** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled. - */ - IO_WRITE(port[CONSOLE_PORT] + UART_PL010_LCRH, - (UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN)); - - /* - ** Finally, enable the UART - */ - IO_WRITE(port[CONSOLE_PORT] + UART_PL010_CR, (UART_PL010_CR_UARTEN)); - - return (0); + unsigned int divisor; + + /* + ** First, disable everything. + */ + IO_WRITE (port[CONSOLE_PORT] + UART_PL010_CR, 0x0); + + /* + ** Set baud rate + ** + */ + switch (baudRate) { + case 9600: + divisor = UART_PL010_BAUD_9600; + break; + + case 19200: + divisor = UART_PL010_BAUD_9600; + break; + + case 38400: + divisor = UART_PL010_BAUD_38400; + break; + + case 57600: + divisor = UART_PL010_BAUD_57600; + break; + + case 115200: + divisor = UART_PL010_BAUD_115200; + break; + + default: + divisor = UART_PL010_BAUD_38400; + } + + IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRM, + ((divisor & 0xf00) >> 8)); + IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRL, (divisor & 0xff)); + + /* + ** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled. + */ + IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRH, + (UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN)); + + /* + ** Finally, enable the UART + */ + IO_WRITE (port[CONSOLE_PORT] + UART_PL010_CR, (UART_PL010_CR_UARTEN)); + + return (0); } -void -serial_putc(const char c) +void serial_putc (const char c) { if (c == '\n') - pl010_putc(CONSOLE_PORT, '\r'); + pl010_putc (CONSOLE_PORT, '\r'); - pl010_putc(CONSOLE_PORT, c); + pl010_putc (CONSOLE_PORT, c); } -void -serial_puts (const char *s) +void serial_puts (const char *s) { while (*s) { serial_putc (*s++); } } -int -serial_getc(void) +int serial_getc (void) { - return pl010_getc(CONSOLE_PORT); + return pl010_getc (CONSOLE_PORT); } -int -serial_tstc(void) +int serial_tstc (void) { - return pl010_tstc(CONSOLE_PORT); + return pl010_tstc (CONSOLE_PORT); } -void -serial_setbrg (void) +void serial_setbrg (void) { } -static void pl010_putc(int portnum, char c) +static void pl010_putc (int portnum, char c) { - /* Wait until there is space in the FIFO */ - while (IO_READ(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF); - - /* Send the character */ - IO_WRITE(port[portnum] + UART_PL01x_DR, c); + /* Wait until there is space in the FIFO */ + while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF); + + /* Send the character */ + IO_WRITE (port[portnum] + UART_PL01x_DR, c); } -static int pl010_getc(int portnum) +static int pl010_getc (int portnum) { - unsigned int data; - - /* Wait until there is data in the FIFO */ - while (IO_READ(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE); - - data = IO_READ(port[portnum] + UART_PL01x_DR); - - /* Check for an error flag */ - if (data & 0xFFFFFF00) - { - /* Clear the error */ - IO_WRITE(port[portnum] + UART_PL01x_ECR, 0xFFFFFFFF); - return -1; - } - - return (int)data; + unsigned int data; + + /* Wait until there is data in the FIFO */ + while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE); + + data = IO_READ (port[portnum] + UART_PL01x_DR); + + /* Check for an error flag */ + if (data & 0xFFFFFF00) { + /* Clear the error */ + IO_WRITE (port[portnum] + UART_PL01x_ECR, 0xFFFFFFFF); + return -1; + } + + return (int) data; } -static int pl010_tstc(int portnum) +static int pl010_tstc (int portnum) { - return !(IO_READ(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE); + return !(IO_READ (port[portnum] + UART_PL01x_FR) & + UART_PL01x_FR_RXFE); } #endif |