diff options
Diffstat (limited to 'include/configs/colibri_vf50.h')
| -rw-r--r-- | include/configs/colibri_vf50.h | 342 |
1 files changed, 0 insertions, 342 deletions
diff --git a/include/configs/colibri_vf50.h b/include/configs/colibri_vf50.h deleted file mode 100644 index 139a1ab644..0000000000 --- a/include/configs/colibri_vf50.h +++ /dev/null @@ -1,342 +0,0 @@ -/* - * Copyright 2013 Toradex, Inc. - * - * Configuration settings for the Colibri VF50 module booting from NAND flash. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* We now boot from the gfxRAM area of the OCRAM. */ -#define CONFIG_BOARD_SIZE_LIMIT 524288 - - /* High Level Configuration Options */ - -#define CONFIG_VYBRID - -#define CONFIG_SYS_VYBRID_HCLK 24000000 -#define CONFIG_SYS_VYBRID_CLK32 32768 -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -#define CONFIG_SYS_ICACHE_OFF -#define CONFIG_SYS_CACHELINE_SIZE 64 - -#include <asm/arch/vybrid-regs.h> - -/* - * Disabled for now due to build problems under Debian and a significant - * increase in the final file size: 144260 vs. 109536 Bytes. - */ - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#undef CONFIG_SETUP_MEMORY_TAGS -#undef CONFIG_INITRD_TAG - -#undef CONFIG_OF_LIBFDT - -#define CONFIG_MACH_TYPE MACH_TYPE_COLIBRI_VF50 -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 4 * 1024 * 1024) - -#define CONFIG_BOARD_LATE_INIT - -#define CONFIG_REVISION_TAG 1 -#define CONFIG_SERIAL_TAG 1 - -#define CONFIG_TRDX_CFG_BLOCK -#define CONFIG_TRDX_CFG_BLOCK_OFFSET 0x40000 - -/* Hardware drivers */ -#define CONFIG_VYBRID_UART -#define CONFIG_VYBRID_UART_BASE UART0_BASE -#define CONFIG_VYBRID_GPIO - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_SYS_UART_PORT (0) -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} - -/* Command definition */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_BDI /* bdinfo */ -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CONSOLE /* coninfo */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ELF -#undef CONFIG_CMD_FLASH -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */ -#define CONFIG_CMD_MISC -#define CONFIG_CMD_MII -#define CONFIG_CMD_NET -#undef CONFIG_CMD_NFS /* NFS support */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_NAND -#define CONFIG_RBTREE -#define CONFIG_LZO -#define CONFIG_CMD_UBI -//#define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */ -#undef CONFIG_CMD_DATE -#define CONFIG_CMD_IMI /* iminfo */ -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADB /* loadb */ -#undef CONFIG_CMD_LOADS /* loads */ - -#define CONFIG_BOOTDELAY 1 - -#define CONFIG_BZIP2 -#define CONFIG_CRC32_VERIFY -#define CONFIG_TIMESTAMP - -#define CONFIG_AUTO_COMPLETE - -/* - * NAND FLASH - */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_JFFS2_NAND -#define CONFIG_NAND_FSL_NFC -#define CONFIG_NAND_FSL_NFC_8BIT -#define CONFIG_SYS_NAND_BASE 0x400E0000 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE -#define CONFIG_SYS_NAND_SELECT_DEVICE -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ -#endif /* CONFIG_CMD_NAND */ - -/* Network configuration */ -#define CONFIG_MCFFEC -#ifdef CONFIG_MCFFEC -# define CONFIG_MII 1 -# define CONFIG_MII_INIT 1 -# define CONFIG_SYS_DISCOVER_PHY -# define CONFIG_SYS_RX_ETH_BUFFER 8 -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN - -# define CONFIG_SYS_FEC1_PINMUX 0 -# define CONFIG_SYS_FEC1_IOBASE MACNET1_BASE_ADDR -# define CONFIG_SYS_FEC1_MIIBASE MACNET1_BASE_ADDR -# define MCFFEC_TOUT_LOOP 50000 -# undef CONFIG_HAS_ETH1 - -# define CONFIG_ETHPRIME "FEC1" -# define CONFIG_IPADDR 192.168.10.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.168.10.1 -#endif /* CONFIG_MCFFEC */ - -#define DEFAULT_BOOTCOMMAND \ - "run ubiboot; run nfsboot" - -#define MMC_BOOTCMD \ - "run setup; " \ - "setenv bootargs ${defargs} ${mmcargs} ${mtdparts} ${setupargs}; " \ - "echo Booting from MMC/SD card...; " \ - "fatload mmc 0:1 ${loadaddr} uImage && bootm" - -#define NFS_BOOTCMD \ - "run setup; " \ - "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} ${setupargs}; " \ - "echo Booting from NFS...; " \ - "dhcp && bootm" - -#define UBI_BOOTCMD \ - "run setup; " \ - "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} ${setupargs}; " \ - "echo Booting from NAND...; " \ - "ubi part kernel-ubi && ubi read ${loadaddr} kernel && bootm" - -#define CONFIG_BOOTCOMMAND DEFAULT_BOOTCOMMAND -#define CONFIG_NFSBOOTCOMMAND NFS_BOOTCMD - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "defargs=vmalloc=64M mem=128M usb_high_speed=1\0" \ - "mmcargs=root=/dev/mmcblk0p2 rw rootwait\0" \ - "sdboot=" MMC_BOOTCMD "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \ - "setup=setenv setupargs " \ - "fec_mac=${ethaddr} no_console_suspend=1 console=tty1 console=ttymxc0" \ - ",${baudrate}n8\0" \ - "ubiargs=ubi.mtd=5 root=ubi0:rootfs rootfstype=ubifs\0" \ - "ubiboot=" UBI_BOOTCMD "\0" \ - "" - -/* Dynamic MTD partition support */ -#define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */ -#define CONFIG_MTD_PARTITIONS /* ??? */ -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define MTDIDS_DEFAULT "nand0=NAND" -#define MTDPARTS_DEFAULT "mtdparts=NAND:" \ - "256k(fcb_)ro," \ - "256k@256k(config-block)ro," \ - "512k@512k(u-boot)ro," \ - "1m(u-boot-env)ro," \ - "8m(kernel-ubi)," \ - "-(rootfs-ubi)" - -/* SD/MMC */ -#define CONFIG_MMC -#ifdef CONFIG_MMC -#define CONFIG_SYS_ESDHC1_BASE ESDHC2_BASE_ADDR -#define CONFIG_FSL_ESDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_FSL_ESDHC_NUM 1 -#define CONFIG_ESDHC_NO_SNOOP 1 -//#define CONFIG_MMC_TRACE - -#define CONFIG_SYS_FSL_ERRATUM_ESDHC135 -#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 -#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001 - -#define CONFIG_CMD_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif /* CONFIG_MMC */ - -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH - -/* Environment not stored */ -//#define CONFIG_ENV_IS_NOWHERE -#ifndef CONFIG_ENV_IS_NOWHERE -/* Environment stored in NAND flash */ -#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ -#if defined(CONFIG_ENV_IS_IN_NAND) -#define CONFIG_ENV_OFFSET 0x100000 -#define CONFIG_ENV_RANGE 0x100000 -#endif /* CONFIG_ENV_IS_IN_NAND */ -#endif /* !CONFIG_ENV_IS_NOWHERE */ -#define CONFIG_ENV_SIZE (8 * 1024) - -#define CONFIG_LOADADDR 0x80010000 /* loadaddr env var */ -#define CONFIG_ARP_TIMEOUT 200UL - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT "Colibri VF50 # " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_MEMTEST_START 0x80010000 -#define CONFIG_SYS_MEMTEST_END 0x87C00000 - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_CMDLINE_EDITING - -#define CONFIG_PRAM 2048 - -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - -/* Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) - -#define CONFIG_SYS_SDRAM_BASE (0x80000000) -#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) -#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) - -#define CONFIG_BOARD_EARLY_INIT_F - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* timer */ -#define FTM_BASE_ADDR FTM0_BASE_ADDR -#define CONFIG_TMR_USEPIT - -/* clock/PLL configuration */ -#define CONFIG_SYS_CLKCTL_CCGR0 0xFFFFFFFF -#define CONFIG_SYS_CLKCTL_CCGR1 0xFFFFFFFF -#define CONFIG_SYS_CLKCTL_CCGR2 0xFFFFFFFF -#define CONFIG_SYS_CLKCTL_CCGR3 0xFFFFFFFF -#define CONFIG_SYS_CLKCTL_CCGR4 0xFFFFFFFF -#define CONFIG_SYS_CLKCTL_CCGR5 0xFFFFFFFF -#define CONFIG_SYS_CLKCTL_CCGR6 0xFFFFFFFF -#define CONFIG_SYS_CLKCTL_CCGR7 0xFFFFFFFF -#define CONFIG_SYS_CLKCTL_CCGR8 0xFFFFFFFF -#define CONFIG_SYS_CLKCTL_CCGR9 0xFFFFFFFF -#define CONFIG_SYS_CLKCTL_CCGR10 0xFFFFFFFF -#define CONFIG_SYS_CLKCTL_CCGR11 0xFFFFFFFF - -#define CONFIG_SYS_CLKCTRL_CCR 0x00010005 -/* 10.2.3 CCM Clock Switcher Register (CCM_CCSR) */ -//DDRC_CLK_SEL: PLL2 PFD2 clk -//PLL2 (PLL 528 MHz) -//PFD2 396 MHz -#define CONFIG_SYS_CLKCTRL_CCSR 0x0003FF24 -#define CONFIG_SYS_CLKCTRL_CACRR 0x00000810 -#define CONFIG_SYS_CLKCTRL_CSCMR1 0x03CA0000 -#define CONFIG_SYS_CLKCTRL_CSCDR1 0x01000000 -#define CONFIG_SYS_CLKCTRL_CSCDR2 0x30114240 -#define CONFIG_SYS_CLKCTRL_CSCDR3 0x00003F1F -/* 9.10.6 Ethernet RMII/MII Clocking - 10.2.9 CCM Serial Clock Multiplexer Register 2 (CCM_CSCMR2) */ -#define CONFIG_SYS_CLKCTRL_CSCMR2 0x00000020 /* RMII_CLK_SEL: - PLL5 main clock */ -#define CONFIG_SYS_CLKCTRL_CSCDR4 0x00000000 -#define CONFIG_SYS_CLKCTRL_CLPCR 0x00000078 - -#define CONFIG_SYS_ANADIG_USB1_CTRL 0x00012000 -#define CONFIG_SYS_ANADIG_USB2_CTRL 0x00012000 -#define CONFIG_SYS_ANADIG_528_CTRL 0x00002001 -#define CONFIG_SYS_ANADIG_528_SS 0x00000000 -#define CONFIG_SYS_ANADIG_528_NUM 0x00000000 -#define CONFIG_SYS_ANADIG_528_DENOM 0x00000012 -#define CONFIG_SYS_ANADIG_VID_CTRL 0x00011028 -#define CONFIG_SYS_ANADIG_VID_NUM 0x00000000 -#define CONFIG_SYS_ANADIG_VID_DENOM 0x00000012 -/* 11.21.13 PLL5 Control register (ANADIG_PLL5_CTRL) */ -#define CONFIG_SYS_ANADIG_ENET_CTRL 0x00002001 /* !BYPASS, !POWERDOWN, - ENABLE */ -#define CONFIG_SYS_ANADIG_PFD_USB1 0x1B1D1A1C -#define CONFIG_SYS_ANADIG_PFD_528 0x171C1813 -#define CONFIG_SYS_ANADIG_USB1_MISC 0x00000002 -#define CONFIG_SYS_ANADIG_USB2_VBUS 0x00100004 -#define CONFIG_SYS_ANADIG_USB2_CHRG 0x00000000 -#define CONFIG_SYS_ANADIG_USB2_MISC 0x00000002 -#define CONFIG_SYS_ANADIG_SYS_CTRL 0x00002001 -#define CONFIG_SYS_ANADIG_SYS_SS 0x00000000 -#define CONFIG_SYS_ANADIG_SYS_NUM 0x00000000 -#define CONFIG_SYS_ANADIG_SYS_DENOM 0x00000012 -#define CONFIG_SYS_ANADIG_SYS_PFD_528 0x00000000 -#define CONFIG_SYS_ANADIG_SYS_PLL_LOCK 0x00000000 - -#endif /* __CONFIG_H */ |