summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2018-06-11mmc: make UHS optionaltoradex_imx_v2017.03_4.9.51_imx8_beta2-bring_upStefan Agner
2018-05-01apalis-imx8: boot from SD card for nowStefan Agner
2018-05-01tdx-cfg-block: add Apalis iMX8 QuadMax supportStefan Agner
2018-05-01toradex: configblock: add an -y parameter to 'cfgblock create’Dominik Sliwa
2018-05-01toradex: configblock: initialize MMC before switching partitionStefan Agner
2018-05-01tdx-cfg-block: add config block supportStefan Agner
2018-05-01tdx-cfg-block: add new SKUsStefan Agner
2018-05-01tdx-cfg-block: add new sku'sMax Krummenacher
2018-04-27apalis-imx8: add default memory layout and network optionsStefan Agner
2018-02-06apalis-imx8: use eMMC as environment location/default boot deviceStefan Agner
2018-02-06apalis-imx8: load HDMI firmwareStefan Agner
2018-02-05apalis-imx8: set device tree to Apalis DT by defaultStefan Agner
2018-02-05apalis-imx8: remove unused GPIOsStefan Agner
2018-02-05apalis-imx8: use UART1 as console UARTStefan Agner
2018-02-05imx8: support UART1 as console UART for Apalis iMX8Stefan Agner
2018-02-05apalis-imx8: fix EthernetStefan Agner
2018-02-05apalis-imx8: remove PCA9557 GPIO controllersStefan Agner
2018-02-05apalis-imx8: remove unavailable peripheralsStefan Agner
2018-02-05apalis-imx8: fix eMMC/MMC/SD interface muxingStefan Agner
2018-02-05apalis-imx8: add Apalis iMX8 specific device treeStefan Agner
2018-02-05apalis-imx8: initial addStefan Agner
2018-01-24MA-11226 [Android] Set active slot fail after flashing bootloaderLuo Ji
2018-01-17MLK-17402 imx8qm/qxp_arm2: Reset ENET1 PHY and MAX7322 at initYe Li
2018-01-17MLK-17375 video: imx: hdp: fix "n" arg for strncmp callOliver Brown
2018-01-17MA-10983-1 Load HDMI firmware from u-boot.binHaoran.Wang
2018-01-16MA-11121 [Android] Enlarge heap size to 96M Bytes for imx8Luo Ji
2018-01-12MLK-17369 imx8qm/qxp: Add controls for display controller resetsOliver Brown
2018-01-10MLK-17357-2 lpi2c: Add bus busy error handlingYe Li
2018-01-10MLK-17357-1 dts: imx8qxp_mek: set the i2c mux register offset to 0Ye Li
2018-01-08MLK-17348 xhci: Reset endpoint when endpoint is haltedYe Li
2018-01-04MA-10983 Load HDMI firmware before bootHaoran.Wang
2018-01-03MA-10967 Add append bootargs env in ubootLuo Ji
2017-12-29MLK-17303-2 imx: 8qm: Fix ENET1 buildPeng Fan
2017-12-29MLK-17303-1 imx: 8qxp: Fix ENET1 enablementPeng Fan
2017-12-29MLK-17324 DTS: imx8qm_mek: Add USBOTG1 nodeYe Li
2017-12-22MLK-17278 imx8qxp_mek: Enable USB OTG port on base boardYe Li
2017-12-20MLK-17254: imx8qxp: configs: change the NAND ENV offset to avoid overlapHan Xu
2017-12-20MLK-17262 video: Fix build break when CONFIG_VIDEO_IMX_HDP_LOAD is not selectedYe Li
2017-12-20MA-10933 [Android] android daily build failedzhang sanshan
2017-12-19MLK-17205-3 video: imx: hdp: Adding configs for HDP firmware loadingOliver Brown
2017-12-19MLK-17205-2 video: imx: hdp: Adding HDP firmware loading to the buildOliver Brown
2017-12-19MLK-17205-1 video: imx: hdp: Adding support for HDP firmware loadingOliver Brown
2017-12-19MLK-17239 mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issueHaibo Chen
2017-12-18MLK-17236 imx8qm_mek: Enable base board powerYe Li
2017-12-13MLK-17189 imx8qxp: change the USDHC_CLK_ROOT source from AVPLLHaibo Chen
2017-12-13MLK-17076 mmc: fsl_esdhc: fix the wrong sd/mmc clock frequency settingHaibo Chen
2017-12-13MA-10872 Write vaild size of gpt image for i.MX8Luo Ji
2017-12-12MLK-17119 i.MX8QM DDR4 ARM2 SupportTeo Hall
2017-12-11MLK-17145 imx: mx6qpsabresd: use mx6qp.cfg for optee supportPeng Fan
2017-12-10MLK-17143 imx8qxp: mek: add xen envPeng Fan
generated by cgit v1.2.3 (git 2.0.4) at 2024-04-24 07:49:42 +0000