From 9f074e67f5a2131336ff1838f2a82e0c2e15d33c Mon Sep 17 00:00:00 2001 From: Prabhakar Kushwaha Date: Wed, 29 Oct 2014 22:33:09 +0530 Subject: powerpc/mpc85xx:Put errata number for T104x NAND boot issue When device is configured to load RCW from NAND flash IFC_A[16:31] are driven low after RCW loading. Hence Devices connected on IFC_CS[1:7] and using IFC_A[16:31] lines are not accessible. Workaround is already in-place. Put the errata number to adhere errata handling framework. Signed-off-by: Prabhakar Kushwaha Reviewed-by: York Sun --- README | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'README') diff --git a/README b/README index 66770b6485..0c892d8a43 100644 --- a/README +++ b/README @@ -409,6 +409,10 @@ The following options need to be configured: Enables a workaround for IFC erratum A003399. It is only requred during NOR boot. + CONFIG_A008044_WORKAROUND + Enables a workaround for T1040/T1042 erratum A008044. It is only + requred during NAND boot and valid for Rev 1.0 SoC revision + CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY This is the value to write into CCSR offset 0x18600 -- cgit v1.2.3