From 3f3e1e33957586e678704ce8276210c1758d031b Mon Sep 17 00:00:00 2001 From: Jacob Chen Date: Sat, 8 Oct 2016 13:47:42 +0800 Subject: rockchip: doc: add GPT partition layout A simple introduction. Signed-off-by: Jacob Chen Acked-by: Simon Glass --- doc/README.rockchip | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'doc') diff --git a/doc/README.rockchip b/doc/README.rockchip index 69b926c52d..06ec80e523 100644 --- a/doc/README.rockchip +++ b/doc/README.rockchip @@ -149,7 +149,6 @@ Note: rk3036 SDMMC and debug uart use the same iomux, so if you boot from SD, th Using fastboot on rk3288 ======================== -- Define GPT partition layout like kylin_rk3036(see include/configs/kylin_rk3036.h) - Write GPT partition layout to mmc device which fastboot want to use it to store the image @@ -212,7 +211,6 @@ When booting you should see something like: Err: serial@ff690000 => - Future work =========== @@ -298,6 +296,15 @@ overhead and in SPL with a 32KB size limit some shortcuts have been taken. In general all Rockchip drivers should use these features, with SPL-specific modifications where required. +GPT partition layout +---------------------------- + +Rockchip use a unified GPT partition layout in open source support. +With this GPT partition layout, uboot can be compatilbe with other components, +like miniloader, trusted-os, arm-trust-firmware. + +There are some documents about partitions in the links below. +http://rockchip.wikidot.com/partitions -- Simon Glass -- cgit v1.2.3