From 112d59a18dc99b36f32139403ac157232f11e76e Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 2 Sep 2016 17:16:45 -0300 Subject: README.imx6: Fix Boundary Devices name Correct name is "Boundary Devices". Signed-off-by: Fabio Estevam --- doc/README.imx6 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'doc') diff --git a/doc/README.imx6 b/doc/README.imx6 index 1823fb2c9d..73b8b0beff 100644 --- a/doc/README.imx6 +++ b/doc/README.imx6 @@ -91,7 +91,7 @@ Word 0x00000002: 9f027772 00000004 2. Using imx_usb_loader for first install with SPL -------------------------------------------------- -imx_usb_loader is a very nice tool by BoundaryDevice that +imx_usb_loader is a very nice tool by Boundary Devices that allow to install U-Boot without a JTAG debugger, using the USB boot mode as described in the manual. It is a replacement for Freescale's MFGTOOLS. -- cgit v1.2.3 From a99546ab6294e11b71dfbeee7f2432b1f028f65d Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Wed, 5 Oct 2016 15:27:03 -0700 Subject: dm: imx: serial: support device tree Support instatiation through device tree. Also parse the fsl,dte-mode property to determine whether DTE mode shall be used. Signed-off-by: Stefan Agner Reviewed-by: Simon Glass --- doc/device-tree-bindings/serial/mxc-serial.txt | 8 ++++++++ 1 file changed, 8 insertions(+) create mode 100644 doc/device-tree-bindings/serial/mxc-serial.txt (limited to 'doc') diff --git a/doc/device-tree-bindings/serial/mxc-serial.txt b/doc/device-tree-bindings/serial/mxc-serial.txt new file mode 100644 index 0000000000..ede92a4854 --- /dev/null +++ b/doc/device-tree-bindings/serial/mxc-serial.txt @@ -0,0 +1,8 @@ +NXP i.MX (MXC) UART + +Required properties: +- compatible: must be "fsl,imx7d-uart" +- reg: start address and size of the registers + +Optional properties: +- fsl,dte-mode: use DTE mode -- cgit v1.2.3 From c571d6828d980e555ba40baf85aab45b39e118ee Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Wed, 5 Oct 2016 15:27:09 -0700 Subject: power: pmic: add Ricoh RN5T567 PMIC support Add device model enabled PMIC driver for Ricoh RN5T567 PMIC used on Colibri iMX7. Signed-off-by: Stefan Agner Reviewed-by: Simon Glass --- doc/device-tree-bindings/pmic/rn5t567.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 doc/device-tree-bindings/pmic/rn5t567.txt (limited to 'doc') diff --git a/doc/device-tree-bindings/pmic/rn5t567.txt b/doc/device-tree-bindings/pmic/rn5t567.txt new file mode 100644 index 0000000000..e9e688537c --- /dev/null +++ b/doc/device-tree-bindings/pmic/rn5t567.txt @@ -0,0 +1,17 @@ +Ricoh RN5T567 PMIC + +This file describes the binding info for the PMIC driver. + +Required properties: +- compatible: "ricoh,rn5t567" +- reg: depending on strapping, e.g. 0x33 + +With those two properties, the PMIC device can be used to read/write +registers. + +Example: + +rn5t567@33 { + compatible = "ricoh,rn5t567"; + reg = <0x33>; +}; -- cgit v1.2.3