/* * linux/include/linux/mtd/nand.h * * Copyright (c) 2000 David Woodhouse * Steven J. Hill * Thomas Gleixner * * $Id: nand.h,v 1.13 2002/04/28 13:40:41 gleixner Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * Info: * Contains standard defines and IDs for NAND flash devices * * Changelog: * 01-31-2000 DMW Created * 09-18-2000 SJH Moved structure out of the Disk-On-Chip drivers * so it can be used by other NAND flash device * drivers. I also changed the copyright since none * of the original contents of this file are specific * to DoC devices. David can whack me with a baseball * bat later if I did something naughty. * 10-11-2000 SJH Added private NAND flash structure for driver * 10-24-2000 SJH Added prototype for 'nand_scan' function * 10-29-2001 TG changed nand_chip structure to support * hardwarespecific function for accessing control lines * 02-21-2002 TG added support for different read/write adress and * ready/busy line access function * 02-26-2002 TG added chip_delay to nand_chip structure to optimize * command delay times for different chips * 04-28-2002 TG OOB config defines moved from nand.c to avoid duplicate * defines in jffs2/wbuf.c */ #ifndef __LINUX_MTD_NAND_H #define __LINUX_MTD_NAND_H /* * Standard NAND flash commands */ #define NAND_CMD_READ0 0 #define NAND_CMD_READ1 1 #define NAND_CMD_PAGEPROG 0x10 #define NAND_CMD_READOOB 0x50 #define NAND_CMD_ERASE1 0x60 #define NAND_CMD_STATUS 0x70 #define NAND_CMD_SEQIN 0x80 #define NAND_CMD_READID 0x90 #define NAND_CMD_ERASE2 0xd0 #define NAND_CMD_RESET 0xff /* * Enumeration for NAND flash chip state */ typedef enum { FL_READY, FL_READING, FL_WRITING, FL_ERASING, FL_SYNCING } nand_state_t; /* * NAND Private Flash Chip Data * * Structure overview: * * IO_ADDR - address to access the 8 I/O lines of the flash device * * hwcontrol - hardwarespecific function for accesing control-lines * * dev_ready - hardwarespecific function for accesing device ready/busy line * * chip_lock - spinlock used to protect access to this structure * * wq - wait queue to sleep on if a NAND operation is in progress * * state - give the current state of the NAND device * * page_shift - number of address bits in a page (column address bits) * * data_buf - data buffer passed to/from MTD user modules * * data_cache - data cache for redundant page access and shadow for * ECC failure * * ecc_code_buf - used only for holding calculated or read ECCs for * a page read or written when ECC is in use * * reserved - padding to make structure fall on word boundary if * when ECC is in use */ struct Nand { char floor, chip; unsigned long curadr; unsigned char curmode; /* Also some erase/write/pipeline info when we get that far */ }; struct nand_chip { int page_shift; u_char *data_buf; u_char *data_cache; int cache_page; u_char ecc_code_buf[6]; u_char reserved[2]; char ChipID; /* Type of DiskOnChip */ struct Nand *chips; int chipshift; char* chips_name; unsigned long erasesize; unsigned long mfr; /* Flash IDs - only one type of flash per device */ unsigned long id; char* name; int numchips; char page256; char pageadrlen; unsigned long IO_ADDR; /* address to access the 8 I/O lines to the flash device */ unsigned long totlen; uint oobblock; /* Size of OOB blocks (e.g. 512) */ uint oobsize; /* Amount of OOB data per block (e.g. 16) */ uint eccsize; }; /* * NAND Flash Manufacturer ID Codes */ #define NAND_MFR_TOSHIBA 0x98 #define NAND_MFR_SAMSUNG 0xec /* * NAND Flash Device ID Structure * * Structure overview: * * name - Complete name of device * * manufacture_id - manufacturer ID code of device. * * model_id - model ID code of device. * * chipshift - total number of address bits for the device which * is used to calculate address offsets and the total * number of bytes the device is capable of. * * page256 - denotes if flash device has 256 byte pages or not. * * pageadrlen - number of bytes minus one needed to hold the * complete address into the flash array. Keep in * mind that when a read or write is done to a * specific address, the address is input serially * 8 bits at a time. This structure member is used * by the read/write routines as a loop index for * shifting the address out 8 bits at a time. * * erasesize - size of an erase block in the flash device. */ struct nand_flash_dev { char * name; int manufacture_id; int model_id; int chipshift; char page256; char pageadrlen; unsigned long erasesize; }; /* * Constants for oob configuration */ #define NAND_NOOB_ECCPOS0 0 #define NAND_NOOB_ECCPOS1 1 #define NAND_NOOB_ECCPOS2 2 #define NAND_NOOB_ECCPOS3 3 #define NAND_NOOB_ECCPOS4 4 #define NAND_NOOB_ECCPOS5 5 #define NAND_NOOB_BADBPOS -1 #define NAND_NOOB_ECCVPOS -1 #define NAND_JFFS2_OOB_ECCPOS0 0 #define NAND_JFFS2_OOB_ECCPOS1 1 #define NAND_JFFS2_OOB_ECCPOS2 2 #define NAND_JFFS2_OOB_ECCPOS3 3 #define NAND_JFFS2_OOB_ECCPOS4 6 #define NAND_JFFS2_OOB_ECCPOS5 7 #define NAND_JFFS2_OOB_BADBPOS 5 #define NAND_JFFS2_OOB_ECCVPOS 4 #define NAND_JFFS2_OOB8_FSDAPOS 6 #define NAND_JFFS2_OOB16_FSDAPOS 8 #define NAND_JFFS2_OOB8_FSDALEN 2 #define NAND_JFFS2_OOB16_FSDALEN 8 void nand_probe(unsigned long physadr); #endif /* __LINUX_MTD_NAND_H */