diff options
Diffstat (limited to 'drivers/bluetooth/Kconfig')
| -rw-r--r-- | drivers/bluetooth/Kconfig | 438 |
1 files changed, 438 insertions, 0 deletions
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig new file mode 100644 index 0000000..5962504 --- /dev/null +++ b/drivers/bluetooth/Kconfig @@ -0,0 +1,438 @@ +# SPDX-License-Identifier: GPL-2.0 + +menu "Bluetooth device drivers" + depends on BT + +config BT_INTEL + tristate + depends on m + depends on REGMAP + +config BT_BCM + tristate + depends on m + depends on FW_LOADER + +config BT_RTL + tristate + depends on m + depends on FW_LOADER + +config BT_QCA + tristate + depends on m + depends on FW_LOADER + +config BT_HCIBTUSB + tristate "HCI USB driver" + depends on m + depends on USB + select BT_INTEL + help + Bluetooth HCI USB driver. + This driver is required if you want to use Bluetooth devices with + USB interface. + + Say Y here to compile support for Bluetooth USB devices into the + kernel or say M to compile it as module (btusb). + +config BT_HCIBTUSB_AUTOSUSPEND + bool "Enable USB autosuspend for Bluetooth USB devices by default" + depends on BT_HCIBTUSB + help + Say Y here to enable USB autosuspend for Bluetooth USB devices by + default. + + This can be overridden by passing btusb.enable_autosuspend=[y|n] + on the kernel commandline. + +config BT_HCIBTUSB_BCM + bool "Broadcom protocol support" + depends on BT_HCIBTUSB + select BT_BCM + default y + help + The Broadcom protocol support enables firmware and patchram + download support for Broadcom Bluetooth controllers. + + Say Y here to compile support for Broadcom protocol. + +config BT_HCIBTUSB_RTL + bool "Realtek protocol support" + depends on BT_HCIBTUSB + select BT_RTL + default y + help + The Realtek protocol support enables firmware and configuration + download support for Realtek Bluetooth controllers. + + Say Y here to compile support for Realtek protocol. + +config BT_HCIBTSDIO + tristate "HCI SDIO driver" + depends on m + depends on MMC + help + Bluetooth HCI SDIO driver. + This driver is required if you want to use Bluetooth device with + SDIO interface. + + Say Y here to compile support for Bluetooth SDIO devices into the + kernel or say M to compile it as module (btsdio). + +config BT_HCIUART + tristate "HCI UART driver" + depends on m + depends on SERIAL_DEV_BUS || !SERIAL_DEV_BUS + depends on NVMEM || !NVMEM + depends on TTY + help + Bluetooth HCI UART driver. + This driver is required if you want to use Bluetooth devices with + serial port interface. You will also need this driver if you have + UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card + adapter and BrainBoxes Bluetooth PC Card. + + Say Y here to compile support for Bluetooth UART devices into the + kernel or say M to compile it as module (hci_uart). + +config BT_HCIUART_SERDEV + bool + depends on SERIAL_DEV_BUS && BT_HCIUART + default y + +config BT_HCIUART_H4 + bool "UART (H4) protocol support" + depends on BT_HCIUART + help + UART (H4) is serial protocol for communication between Bluetooth + device and host. This protocol is required for most Bluetooth devices + with UART interface, including PCMCIA and CF cards. + + Say Y here to compile support for HCI UART (H4) protocol. + +config BT_HCIUART_NOKIA + tristate "UART Nokia H4+ protocol support" + depends on m + depends on BT_HCIUART + depends on BT_HCIUART_SERDEV + depends on GPIOLIB + depends on PM + select BT_HCIUART_H4 + select BT_BCM + help + Nokia H4+ is serial protocol for communication between Bluetooth + device and host. This protocol is required for Bluetooth devices + with UART interface in Nokia devices. + + Say Y here to compile support for Nokia's H4+ protocol. + +config BT_HCIUART_BCSP + bool "BCSP protocol support" + depends on BT_HCIUART + depends on BITREVERSE + help + BCSP (BlueCore Serial Protocol) is serial protocol for communication + between Bluetooth device and host. This protocol is required for non + USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and + CF cards. + + Say Y here to compile support for HCI BCSP protocol. + +config BT_HCIUART_ATH3K + bool "Atheros AR300x serial support" + depends on BT_HCIUART + select BT_HCIUART_H4 + help + HCIATH3K (HCI Atheros AR300x) is a serial protocol for + communication between host and Atheros AR300x Bluetooth devices. + This protocol enables AR300x chips to be enabled with + power management support. + Enable this if you have Atheros AR300x serial Bluetooth device. + + Say Y here to compile support for HCI UART ATH3K protocol. + +config BT_HCIUART_LL + bool "HCILL protocol support" + depends on BT_HCIUART_SERDEV + select BT_HCIUART_H4 + help + HCILL (HCI Low Level) is a serial protocol for communication + between Bluetooth device and host. This protocol is required for + serial Bluetooth devices that are based on Texas Instruments' + BRF chips. + + Say Y here to compile support for HCILL protocol. + +config BT_HCIUART_3WIRE + bool "Three-wire UART (H5) protocol support" + depends on BT_HCIUART + depends on BT_HCIUART_SERDEV + help + The HCI Three-wire UART Transport Layer makes it possible to + user the Bluetooth HCI over a serial port interface. The HCI + Three-wire UART Transport Layer assumes that the UART + communication may have bit errors, overrun errors or burst + errors and thereby making CTS/RTS lines unnecessary. + + Say Y here to compile support for Three-wire UART protocol. + +config BT_HCIUART_INTEL + bool "Intel protocol support" + depends on BT_HCIUART + depends on GPIOLIB + select BT_HCIUART_H4 + select BT_INTEL + help + The Intel protocol support enables Bluetooth HCI over serial + port interface for Intel Bluetooth controllers. + + Say Y here to compile support for Intel protocol. + +config BT_HCIUART_BCM + bool "Broadcom protocol support" + depends on BT_HCIUART + depends on BT_HCIUART_SERDEV + depends on (!ACPI || SERIAL_DEV_CTRL_TTYPORT) + depends on GPIOLIB + select BT_HCIUART_H4 + select BT_BCM + help + The Broadcom protocol support enables Bluetooth HCI over serial + port interface for Broadcom Bluetooth controllers. + + Say Y here to compile support for Broadcom protocol. + +config BT_HCIUART_RTL + bool "Realtek protocol support" + depends on BT_HCIUART + depends on BT_HCIUART_SERDEV + depends on GPIOLIB + depends on ACPI + select BT_HCIUART_3WIRE + select BT_RTL + help + The Realtek protocol support enables Bluetooth HCI over 3-Wire + serial port internface for Realtek Bluetooth controllers. + + Say Y here to compile support for Realtek protocol. + +config BT_HCIUART_QCA + bool "Qualcomm Atheros protocol support" + depends on BT_HCIUART + depends on BT_HCIUART_SERDEV + select BT_HCIUART_H4 + select BT_QCA + help + The Qualcomm Atheros protocol supports HCI In-Band Sleep feature + over serial port interface(H4) between controller and host. + This protocol is required for UART clock control for QCA Bluetooth + devices. + + Say Y here to compile support for QCA protocol. + +config BT_HCIUART_AG6XX + bool "Intel AG6XX protocol support" + depends on BT_HCIUART + select BT_HCIUART_H4 + select BT_INTEL + help + The Intel/AG6XX protocol support enables Bluetooth HCI over serial + port interface for Intel ibt 2.1 Bluetooth controllers. + + Say Y here to compile support for Intel AG6XX protocol. + +config BT_HCIUART_MRVL + bool "Marvell protocol support" + depends on BT_HCIUART + select BT_HCIUART_H4 + help + Marvell is serial protocol for communication between Bluetooth + device and host. This protocol is required for most Marvell Bluetooth + devices with UART interface. + + Say Y here to compile support for HCI MRVL protocol. + +config BT_HCIBCM203X + tristate "HCI BCM203x USB driver" + depends on m + depends on USB + depends on FW_LOADER + help + Bluetooth HCI BCM203x USB driver. + This driver provides the firmware loading mechanism for the Broadcom + Blutonium based devices. + + Say Y here to compile support for HCI BCM203x devices into the + kernel or say M to compile it as module (bcm203x). + +config BT_HCIBPA10X + tristate "HCI BPA10x USB driver" + depends on m + depends on USB + help + Bluetooth HCI BPA10x USB driver. + This driver provides support for the Digianswer BPA 100/105 Bluetooth + sniffer devices. + + Say Y here to compile support for HCI BPA10x devices into the + kernel or say M to compile it as module (bpa10x). + +config BT_HCIBFUSB + tristate "HCI BlueFRITZ! USB driver" + depends on m + depends on USB + depends on FW_LOADER + help + Bluetooth HCI BlueFRITZ! USB driver. + This driver provides support for Bluetooth USB devices with AVM + interface: + AVM BlueFRITZ! USB + + Say Y here to compile support for HCI BFUSB devices into the + kernel or say M to compile it as module (bfusb). + +config BT_HCIDTL1 + tristate "HCI DTL1 (PC Card) driver" + depends on m + depends on PCMCIA + help + Bluetooth HCI DTL1 (PC Card) driver. + This driver provides support for Bluetooth PCMCIA devices with + Nokia DTL1 interface: + Nokia Bluetooth Card + Socket Bluetooth CF Card + + Say Y here to compile support for HCI DTL1 devices into the + kernel or say M to compile it as module (dtl1_cs). + +config BT_HCIBT3C + tristate "HCI BT3C (PC Card) driver" + depends on m + depends on PCMCIA + depends on FW_LOADER + help + Bluetooth HCI BT3C (PC Card) driver. + This driver provides support for Bluetooth PCMCIA devices with + 3Com BT3C interface: + 3Com Bluetooth Card (3CRWB6096) + HP Bluetooth Card + + Say Y here to compile support for HCI BT3C devices into the + kernel or say M to compile it as module (bt3c_cs). + +config BT_HCIBLUECARD + tristate "HCI BlueCard (PC Card) driver" + depends on m + depends on PCMCIA + help + Bluetooth HCI BlueCard (PC Card) driver. + This driver provides support for Bluetooth PCMCIA devices with + Anycom BlueCard interface: + Anycom Bluetooth PC Card + Anycom Bluetooth CF Card + + Say Y here to compile support for HCI BlueCard devices into the + kernel or say M to compile it as module (bluecard_cs). + +config BT_HCIVHCI + tristate "HCI VHCI (Virtual HCI device) driver" + depends on m + help + Bluetooth Virtual HCI device driver. + This driver is required if you want to use HCI Emulation software. + + Say Y here to compile support for virtual HCI devices into the + kernel or say M to compile it as module (hci_vhci). + +config BT_MRVL + tristate "Marvell Bluetooth driver support" + depends on m + help + The core driver to support Marvell Bluetooth devices. + + This driver is required if you want to support + Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8997. + + Say Y here to compile Marvell Bluetooth driver + into the kernel or say M to compile it as module. + +config BT_MRVL_SDIO + tristate "Marvell BT-over-SDIO driver" + depends on m + depends on BT_MRVL && MMC + depends on FW_LOADER + select BPAUTO_WANT_DEV_COREDUMP + help + The driver for Marvell Bluetooth chipsets with SDIO interface. + + This driver is required if you want to use Marvell Bluetooth + devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8997 + chipsets are supported. + + Say Y here to compile support for Marvell BT-over-SDIO driver + into the kernel or say M to compile it as module. + +config BT_ATH3K + tristate "Atheros firmware download driver" + depends on m + depends on BT_HCIBTUSB + depends on FW_LOADER + help + Bluetooth firmware download driver. + This driver loads the firmware into the Atheros Bluetooth + chipset. + + Say Y here to compile support for "Atheros firmware download driver" + into the kernel or say M to compile it as module (ath3k). + +config BT_WILINK + tristate "Texas Instruments WiLink7 driver" + depends on m + depends on TI_ST + help + This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS + combo devices. This makes use of shared transport line discipline + core driver to communicate with the BT core of the combo chip. + + Say Y here to compile support for Texas Instrument's WiLink7 driver + into the kernel or say M to compile it as module (btwilink). + +config BT_MTKUART + tristate "MediaTek HCI UART driver" + depends on m + depends on SERIAL_DEV_BUS + help + MediaTek Bluetooth HCI UART driver. + This driver is required if you want to use MediaTek Bluetooth + with serial interface. + + Say Y here to compile support for MediaTek Bluetooth UART devices + into the kernel or say M to compile it as module (btmtkuart). + +config BT_QCOMSMD + tristate "Qualcomm SMD based HCI support" + depends on m + depends on RPMSG || (COMPILE_TEST && RPMSG=n) + depends on QCOM_WCNSS_CTRL || (COMPILE_TEST && QCOM_WCNSS_CTRL=n) + select BT_QCA + help + Qualcomm SMD based HCI driver. + This driver is used to bridge HCI data onto the shared memory + channels to the WCNSS core. + + Say Y here to compile support for HCI over Qualcomm SMD into the + kernel or say M to compile as a module. + +config BT_HCIRSI + tristate + depends on m + help + Redpine BT driver. + This driver handles BT traffic from upper layers and pass + to the RSI_91x coex module for further scheduling to device + + Say Y here to compile support for HCI over Redpine into the + kernel or say M to compile as a module. + +endmenu |