diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/rx_desc.h')
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/rx_desc.h | 1280 |
1 files changed, 1280 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h b/drivers/net/wireless/ath/ath10k/rx_desc.h new file mode 100644 index 0000000..ea4075d --- /dev/null +++ b/drivers/net/wireless/ath/ath10k/rx_desc.h @@ -0,0 +1,1280 @@ +/* + * Copyright (c) 2005-2011 Atheros Communications Inc. + * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _RX_DESC_H_ +#define _RX_DESC_H_ + +#include <linux/bitops.h> + +enum rx_attention_flags { + RX_ATTENTION_FLAGS_FIRST_MPDU = BIT(0), + RX_ATTENTION_FLAGS_LAST_MPDU = BIT(1), + RX_ATTENTION_FLAGS_MCAST_BCAST = BIT(2), + RX_ATTENTION_FLAGS_PEER_IDX_INVALID = BIT(3), + RX_ATTENTION_FLAGS_PEER_IDX_TIMEOUT = BIT(4), + RX_ATTENTION_FLAGS_POWER_MGMT = BIT(5), + RX_ATTENTION_FLAGS_NON_QOS = BIT(6), + RX_ATTENTION_FLAGS_NULL_DATA = BIT(7), + RX_ATTENTION_FLAGS_MGMT_TYPE = BIT(8), + RX_ATTENTION_FLAGS_CTRL_TYPE = BIT(9), + RX_ATTENTION_FLAGS_MORE_DATA = BIT(10), + RX_ATTENTION_FLAGS_EOSP = BIT(11), + RX_ATTENTION_FLAGS_U_APSD_TRIGGER = BIT(12), + RX_ATTENTION_FLAGS_FRAGMENT = BIT(13), + RX_ATTENTION_FLAGS_ORDER = BIT(14), + RX_ATTENTION_FLAGS_CLASSIFICATION = BIT(15), + RX_ATTENTION_FLAGS_OVERFLOW_ERR = BIT(16), + RX_ATTENTION_FLAGS_MSDU_LENGTH_ERR = BIT(17), + RX_ATTENTION_FLAGS_TCP_UDP_CHKSUM_FAIL = BIT(18), + RX_ATTENTION_FLAGS_IP_CHKSUM_FAIL = BIT(19), + RX_ATTENTION_FLAGS_SA_IDX_INVALID = BIT(20), + RX_ATTENTION_FLAGS_DA_IDX_INVALID = BIT(21), + RX_ATTENTION_FLAGS_SA_IDX_TIMEOUT = BIT(22), + RX_ATTENTION_FLAGS_DA_IDX_TIMEOUT = BIT(23), + RX_ATTENTION_FLAGS_ENCRYPT_REQUIRED = BIT(24), + RX_ATTENTION_FLAGS_DIRECTED = BIT(25), + RX_ATTENTION_FLAGS_BUFFER_FRAGMENT = BIT(26), + RX_ATTENTION_FLAGS_MPDU_LENGTH_ERR = BIT(27), + RX_ATTENTION_FLAGS_TKIP_MIC_ERR = BIT(28), + RX_ATTENTION_FLAGS_DECRYPT_ERR = BIT(29), + RX_ATTENTION_FLAGS_FCS_ERR = BIT(30), + RX_ATTENTION_FLAGS_MSDU_DONE = BIT(31), +}; + +struct rx_attention { + __le32 flags; /* %RX_ATTENTION_FLAGS_ */ +} __packed; + +/* + * first_mpdu + * Indicates the first MSDU of the PPDU. If both first_mpdu + * and last_mpdu are set in the MSDU then this is a not an + * A-MPDU frame but a stand alone MPDU. Interior MPDU in an + * A-MPDU shall have both first_mpdu and last_mpdu bits set to + * 0. The PPDU start status will only be valid when this bit + * is set. + * + * last_mpdu + * Indicates the last MSDU of the last MPDU of the PPDU. The + * PPDU end status will only be valid when this bit is set. + * + * mcast_bcast + * Multicast / broadcast indicator. Only set when the MAC + * address 1 bit 0 is set indicating mcast/bcast and the BSSID + * matches one of the 4 BSSID registers. Only set when + * first_msdu is set. + * + * peer_idx_invalid + * Indicates no matching entries within the the max search + * count. Only set when first_msdu is set. + * + * peer_idx_timeout + * Indicates an unsuccessful search for the peer index due to + * timeout. Only set when first_msdu is set. + * + * power_mgmt + * Power management bit set in the 802.11 header. Only set + * when first_msdu is set. + * + * non_qos + * Set if packet is not a non-QoS data frame. Only set when + * first_msdu is set. + * + * null_data + * Set if frame type indicates either null data or QoS null + * data format. Only set when first_msdu is set. + * + * mgmt_type + * Set if packet is a management packet. Only set when + * first_msdu is set. + * + * ctrl_type + * Set if packet is a control packet. Only set when first_msdu + * is set. + * + * more_data + * Set if more bit in frame control is set. Only set when + * first_msdu is set. + * + * eosp + * Set if the EOSP (end of service period) bit in the QoS + * control field is set. Only set when first_msdu is set. + * + * u_apsd_trigger + * Set if packet is U-APSD trigger. Key table will have bits + * per TID to indicate U-APSD trigger. + * + * fragment + * Indicates that this is an 802.11 fragment frame. This is + * set when either the more_frag bit is set in the frame + * control or the fragment number is not zero. Only set when + * first_msdu is set. + * + * order + * Set if the order bit in the frame control is set. Only set + * when first_msdu is set. + * + * classification + * Indicates that this status has a corresponding MSDU that + * requires FW processing. The OLE will have classification + * ring mask registers which will indicate the ring(s) for + * packets and descriptors which need FW attention. + * + * overflow_err + * PCU Receive FIFO does not have enough space to store the + * full receive packet. Enough space is reserved in the + * receive FIFO for the status is written. This MPDU remaining + * packets in the PPDU will be filtered and no Ack response + * will be transmitted. + * + * msdu_length_err + * Indicates that the MSDU length from the 802.3 encapsulated + * length field extends beyond the MPDU boundary. + * + * tcp_udp_chksum_fail + * Indicates that the computed checksum (tcp_udp_chksum) did + * not match the checksum in the TCP/UDP header. + * + * ip_chksum_fail + * Indicates that the computed checksum did not match the + * checksum in the IP header. + * + * sa_idx_invalid + * Indicates no matching entry was found in the address search + * table for the source MAC address. + * + * da_idx_invalid + * Indicates no matching entry was found in the address search + * table for the destination MAC address. + * + * sa_idx_timeout + * Indicates an unsuccessful search for the source MAC address + * due to the expiring of the search timer. + * + * da_idx_timeout + * Indicates an unsuccessful search for the destination MAC + * address due to the expiring of the search timer. + * + * encrypt_required + * Indicates that this data type frame is not encrypted even if + * the policy for this MPDU requires encryption as indicated in + * the peer table key type. + * + * directed + * MPDU is a directed packet which means that the RA matched + * our STA addresses. In proxySTA it means that the TA matched + * an entry in our address search table with the corresponding + * 'no_ack' bit is the address search entry cleared. + * + * buffer_fragment + * Indicates that at least one of the rx buffers has been + * fragmented. If set the FW should look at the rx_frag_info + * descriptor described below. + * + * mpdu_length_err + * Indicates that the MPDU was pre-maturely terminated + * resulting in a truncated MPDU. Don't trust the MPDU length + * field. + * + * tkip_mic_err + * Indicates that the MPDU Michael integrity check failed + * + * decrypt_err + * Indicates that the MPDU decrypt integrity check failed + * + * fcs_err + * Indicates that the MPDU FCS check failed + * + * msdu_done + * If set indicates that the RX packet data, RX header data, RX + * PPDU start descriptor, RX MPDU start/end descriptor, RX MSDU + * start/end descriptors and RX Attention descriptor are all + * valid. This bit must be in the last octet of the + * descriptor. + */ + +struct rx_frag_info { + u8 ring0_more_count; + u8 ring1_more_count; + u8 ring2_more_count; + u8 ring3_more_count; + u8 ring4_more_count; + u8 ring5_more_count; + u8 ring6_more_count; + u8 ring7_more_count; +} __packed; + +/* + * ring0_more_count + * Indicates the number of more buffers associated with RX DMA + * ring 0. Field is filled in by the RX_DMA. + * + * ring1_more_count + * Indicates the number of more buffers associated with RX DMA + * ring 1. Field is filled in by the RX_DMA. + * + * ring2_more_count + * Indicates the number of more buffers associated with RX DMA + * ring 2. Field is filled in by the RX_DMA. + * + * ring3_more_count + * Indicates the number of more buffers associated with RX DMA + * ring 3. Field is filled in by the RX_DMA. + */ + +enum htt_rx_mpdu_encrypt_type { + HTT_RX_MPDU_ENCRYPT_WEP40 = 0, + HTT_RX_MPDU_ENCRYPT_WEP104 = 1, + HTT_RX_MPDU_ENCRYPT_TKIP_WITHOUT_MIC = 2, + HTT_RX_MPDU_ENCRYPT_WEP128 = 3, + HTT_RX_MPDU_ENCRYPT_TKIP_WPA = 4, + HTT_RX_MPDU_ENCRYPT_WAPI = 5, + HTT_RX_MPDU_ENCRYPT_AES_CCM_WPA2 = 6, + HTT_RX_MPDU_ENCRYPT_NONE = 7, + HTT_RX_MPDU_ENCRYPT_AES_CCM256_WPA2 = 8, + HTT_RX_MPDU_ENCRYPT_AES_GCMP_WPA2 = 9, + HTT_RX_MPDU_ENCRYPT_AES_GCMP256_WPA2 = 10, +}; + +#define RX_MPDU_START_INFO0_PEER_IDX_MASK 0x000007ff +#define RX_MPDU_START_INFO0_PEER_IDX_LSB 0 +#define RX_MPDU_START_INFO0_SEQ_NUM_MASK 0x0fff0000 +#define RX_MPDU_START_INFO0_SEQ_NUM_LSB 16 +#define RX_MPDU_START_INFO0_ENCRYPT_TYPE_MASK 0xf0000000 +#define RX_MPDU_START_INFO0_ENCRYPT_TYPE_LSB 28 +#define RX_MPDU_START_INFO0_FROM_DS BIT(11) +#define RX_MPDU_START_INFO0_TO_DS BIT(12) +#define RX_MPDU_START_INFO0_ENCRYPTED BIT(13) +#define RX_MPDU_START_INFO0_RETRY BIT(14) +#define RX_MPDU_START_INFO0_TXBF_H_INFO BIT(15) + +#define RX_MPDU_START_INFO1_TID_MASK 0xf0000000 +#define RX_MPDU_START_INFO1_TID_LSB 28 +#define RX_MPDU_START_INFO1_DIRECTED BIT(16) + +struct rx_mpdu_start { + __le32 info0; + union { + struct { + __le32 pn31_0; + __le32 info1; /* %RX_MPDU_START_INFO1_ */ + } __packed; + struct { + u8 pn[6]; + } __packed; + } __packed; +} __packed; + +/* + * peer_idx + * The index of the address search table which associated with + * the peer table entry corresponding to this MPDU. Only valid + * when first_msdu is set. + * + * fr_ds + * Set if the from DS bit is set in the frame control. Only + * valid when first_msdu is set. + * + * to_ds + * Set if the to DS bit is set in the frame control. Only + * valid when first_msdu is set. + * + * encrypted + * Protected bit from the frame control. Only valid when + * first_msdu is set. + * + * retry + * Retry bit from the frame control. Only valid when + * first_msdu is set. + * + * txbf_h_info + * The MPDU data will contain H information. Primarily used + * for debug. + * + * seq_num + * The sequence number from the 802.11 header. Only valid when + * first_msdu is set. + * + * encrypt_type + * Indicates type of decrypt cipher used (as defined in the + * peer table) + * 0: WEP40 + * 1: WEP104 + * 2: TKIP without MIC + * 3: WEP128 + * 4: TKIP (WPA) + * 5: WAPI + * 6: AES-CCM (WPA2) + * 7: No cipher + * Only valid when first_msdu_is set + * + * pn_31_0 + * Bits [31:0] of the PN number extracted from the IV field + * WEP: IV = {key_id_octet, pn2, pn1, pn0}. Only pn[23:0] is + * valid. + * TKIP: IV = {pn5, pn4, pn3, pn2, key_id_octet, pn0, + * WEPSeed[1], pn1}. Only pn[47:0] is valid. + * AES-CCM: IV = {pn5, pn4, pn3, pn2, key_id_octet, 0x0, pn1, + * pn0}. Only pn[47:0] is valid. + * WAPI: IV = {key_id_octet, 0x0, pn15, pn14, pn13, pn12, pn11, + * pn10, pn9, pn8, pn7, pn6, pn5, pn4, pn3, pn2, pn1, pn0}. + * The ext_wapi_pn[127:48] in the rx_msdu_misc descriptor and + * pn[47:0] are valid. + * Only valid when first_msdu is set. + * + * pn_47_32 + * Bits [47:32] of the PN number. See description for + * pn_31_0. The remaining PN fields are in the rx_msdu_end + * descriptor + * + * pn + * Use this field to access the pn without worrying about + * byte-order and bitmasking/bitshifting. + * + * directed + * See definition in RX attention descriptor + * + * reserved_2 + * Reserved: HW should fill with zero. FW should ignore. + * + * tid + * The TID field in the QoS control field + */ + +#define RX_MPDU_END_INFO0_RESERVED_0_MASK 0x00001fff +#define RX_MPDU_END_INFO0_RESERVED_0_LSB 0 +#define RX_MPDU_END_INFO0_POST_DELIM_CNT_MASK 0x0fff0000 +#define RX_MPDU_END_INFO0_POST_DELIM_CNT_LSB 16 +#define RX_MPDU_END_INFO0_OVERFLOW_ERR BIT(13) +#define RX_MPDU_END_INFO0_LAST_MPDU BIT(14) +#define RX_MPDU_END_INFO0_POST_DELIM_ERR BIT(15) +#define RX_MPDU_END_INFO0_MPDU_LENGTH_ERR BIT(28) +#define RX_MPDU_END_INFO0_TKIP_MIC_ERR BIT(29) +#define RX_MPDU_END_INFO0_DECRYPT_ERR BIT(30) +#define RX_MPDU_END_INFO0_FCS_ERR BIT(31) + +struct rx_mpdu_end { + __le32 info0; +} __packed; + +/* + * reserved_0 + * Reserved + * + * overflow_err + * PCU Receive FIFO does not have enough space to store the + * full receive packet. Enough space is reserved in the + * receive FIFO for the status is written. This MPDU remaining + * packets in the PPDU will be filtered and no Ack response + * will be transmitted. + * + * last_mpdu + * Indicates that this is the last MPDU of a PPDU. + * + * post_delim_err + * Indicates that a delimiter FCS error occurred after this + * MPDU before the next MPDU. Only valid when last_msdu is + * set. + * + * post_delim_cnt + * Count of the delimiters after this MPDU. This requires the + * last MPDU to be held until all the EOF descriptors have been + * received. This may be inefficient in the future when + * ML-MIMO is used. Only valid when last_mpdu is set. + * + * mpdu_length_err + * See definition in RX attention descriptor + * + * tkip_mic_err + * See definition in RX attention descriptor + * + * decrypt_err + * See definition in RX attention descriptor + * + * fcs_err + * See definition in RX attention descriptor + */ + +#define RX_MSDU_START_INFO0_MSDU_LENGTH_MASK 0x00003fff +#define RX_MSDU_START_INFO0_MSDU_LENGTH_LSB 0 +#define RX_MSDU_START_INFO0_IP_OFFSET_MASK 0x000fc000 +#define RX_MSDU_START_INFO0_IP_OFFSET_LSB 14 +#define RX_MSDU_START_INFO0_RING_MASK_MASK 0x00f00000 +#define RX_MSDU_START_INFO0_RING_MASK_LSB 20 +#define RX_MSDU_START_INFO0_TCP_UDP_OFFSET_MASK 0x7f000000 +#define RX_MSDU_START_INFO0_TCP_UDP_OFFSET_LSB 24 + +#define RX_MSDU_START_INFO1_MSDU_NUMBER_MASK 0x000000ff +#define RX_MSDU_START_INFO1_MSDU_NUMBER_LSB 0 +#define RX_MSDU_START_INFO1_DECAP_FORMAT_MASK 0x00000300 +#define RX_MSDU_START_INFO1_DECAP_FORMAT_LSB 8 +#define RX_MSDU_START_INFO1_SA_IDX_MASK 0x07ff0000 +#define RX_MSDU_START_INFO1_SA_IDX_LSB 16 +#define RX_MSDU_START_INFO1_IPV4_PROTO BIT(10) +#define RX_MSDU_START_INFO1_IPV6_PROTO BIT(11) +#define RX_MSDU_START_INFO1_TCP_PROTO BIT(12) +#define RX_MSDU_START_INFO1_UDP_PROTO BIT(13) +#define RX_MSDU_START_INFO1_IP_FRAG BIT(14) +#define RX_MSDU_START_INFO1_TCP_ONLY_ACK BIT(15) + +#define RX_MSDU_START_INFO2_DA_IDX_MASK 0x000007ff +#define RX_MSDU_START_INFO2_DA_IDX_LSB 0 +#define RX_MSDU_START_INFO2_IP_PROTO_FIELD_MASK 0x00ff0000 +#define RX_MSDU_START_INFO2_IP_PROTO_FIELD_LSB 16 +#define RX_MSDU_START_INFO2_DA_BCAST_MCAST BIT(11) + +/* The decapped header (rx_hdr_status) contains the following: + * a) 802.11 header + * [padding to 4 bytes] + * b) HW crypto parameter + * - 0 bytes for no security + * - 4 bytes for WEP + * - 8 bytes for TKIP, AES + * [padding to 4 bytes] + * c) A-MSDU subframe header (14 bytes) if appliable + * d) LLC/SNAP (RFC1042, 8 bytes) + * + * In case of A-MSDU only first frame in sequence contains (a) and (b). + */ +enum rx_msdu_decap_format { + RX_MSDU_DECAP_RAW = 0, + + /* Note: QoS frames are reported as non-QoS. The rx_hdr_status in + * htt_rx_desc contains the original decapped 802.11 header. + */ + RX_MSDU_DECAP_NATIVE_WIFI = 1, + + /* Payload contains an ethernet header (struct ethhdr). */ + RX_MSDU_DECAP_ETHERNET2_DIX = 2, + + /* Payload contains two 48-bit addresses and 2-byte length (14 bytes + * total), followed by an RFC1042 header (8 bytes). + */ + RX_MSDU_DECAP_8023_SNAP_LLC = 3 +}; + +struct rx_msdu_start_common { + __le32 info0; /* %RX_MSDU_START_INFO0_ */ + __le32 flow_id_crc; + __le32 info1; /* %RX_MSDU_START_INFO1_ */ +} __packed; + +struct rx_msdu_start_qca99x0 { + __le32 info2; /* %RX_MSDU_START_INFO2_ */ +} __packed; + +struct rx_msdu_start_wcn3990 { + __le32 info2; /* %RX_MSDU_START_INFO2_ */ + __le32 info3; /* %RX_MSDU_START_INFO3_ */ +} __packed; + +struct rx_msdu_start { + struct rx_msdu_start_common common; + union { + struct rx_msdu_start_qca99x0 qca99x0; + struct rx_msdu_start_wcn3990 wcn3990; + } __packed; +} __packed; + +/* + * msdu_length + * MSDU length in bytes after decapsulation. This field is + * still valid for MPDU frames without A-MSDU. It still + * represents MSDU length after decapsulation + * + * ip_offset + * Indicates the IP offset in bytes from the start of the + * packet after decapsulation. Only valid if ipv4_proto or + * ipv6_proto is set. + * + * ring_mask + * Indicates the destination RX rings for this MSDU. + * + * tcp_udp_offset + * Indicates the offset in bytes to the start of TCP or UDP + * header from the start of the IP header after decapsulation. + * Only valid if tcp_prot or udp_prot is set. The value 0 + * indicates that the offset is longer than 127 bytes. + * + * reserved_0c + * Reserved: HW should fill with zero. FW should ignore. + * + * flow_id_crc + * The flow_id_crc runs CRC32 on the following information: + * IPv4 option: dest_addr[31:0], src_addr [31:0], {24'b0, + * protocol[7:0]}. + * IPv6 option: dest_addr[127:0], src_addr [127:0], {24'b0, + * next_header[7:0]} + * UDP case: sort_port[15:0], dest_port[15:0] + * TCP case: sort_port[15:0], dest_port[15:0], + * {header_length[3:0], 6'b0, flags[5:0], window_size[15:0]}, + * {16'b0, urgent_ptr[15:0]}, all options except 32-bit + * timestamp. + * + * msdu_number + * Indicates the MSDU number within a MPDU. This value is + * reset to zero at the start of each MPDU. If the number of + * MSDU exceeds 255 this number will wrap using modulo 256. + * + * decap_format + * Indicates the format after decapsulation: + * 0: RAW: No decapsulation + * 1: Native WiFi + * 2: Ethernet 2 (DIX) + * 3: 802.3 (SNAP/LLC) + * + * ipv4_proto + * Set if L2 layer indicates IPv4 protocol. + * + * ipv6_proto + * Set if L2 layer indicates IPv6 protocol. + * + * tcp_proto + * Set if the ipv4_proto or ipv6_proto are set and the IP + * protocol indicates TCP. + * + * udp_proto + * Set if the ipv4_proto or ipv6_proto are set and the IP + * protocol indicates UDP. + * + * ip_frag + * Indicates that either the IP More frag bit is set or IP frag + * number is non-zero. If set indicates that this is a + * fragmented IP packet. + * + * tcp_only_ack + * Set if only the TCP Ack bit is set in the TCP flags and if + * the TCP payload is 0. + * + * sa_idx + * The offset in the address table which matches the MAC source + * address. + * + * reserved_2b + * Reserved: HW should fill with zero. FW should ignore. + */ + +#define RX_MSDU_END_INFO0_REPORTED_MPDU_LENGTH_MASK 0x00003fff +#define RX_MSDU_END_INFO0_REPORTED_MPDU_LENGTH_LSB 0 +#define RX_MSDU_END_INFO0_FIRST_MSDU BIT(14) +#define RX_MSDU_END_INFO0_LAST_MSDU BIT(15) +#define RX_MSDU_END_INFO0_PRE_DELIM_ERR BIT(30) +#define RX_MSDU_END_INFO0_RESERVED_3B BIT(31) + +struct rx_msdu_end_common { + __le16 ip_hdr_cksum; + __le16 tcp_hdr_cksum; + u8 key_id_octet; + u8 classification_filter; + u8 wapi_pn[10]; + __le32 info0; +} __packed; + +#define RX_MSDU_END_INFO1_TCP_FLAG_MASK 0x000001ff +#define RX_MSDU_END_INFO1_TCP_FLAG_LSB 0 +#define RX_MSDU_END_INFO1_L3_HDR_PAD_MASK 0x00001c00 +#define RX_MSDU_END_INFO1_L3_HDR_PAD_LSB 10 +#define RX_MSDU_END_INFO1_WINDOW_SIZE_MASK 0xffff0000 +#define RX_MSDU_END_INFO1_WINDOW_SIZE_LSB 16 +#define RX_MSDU_END_INFO1_IRO_ELIGIBLE BIT(9) + +#define RX_MSDU_END_INFO2_DA_OFFSET_MASK 0x0000003f +#define RX_MSDU_END_INFO2_DA_OFFSET_LSB 0 +#define RX_MSDU_END_INFO2_SA_OFFSET_MASK 0x00000fc0 +#define RX_MSDU_END_INFO2_SA_OFFSET_LSB 6 +#define RX_MSDU_END_INFO2_TYPE_OFFSET_MASK 0x0003f000 +#define RX_MSDU_END_INFO2_TYPE_OFFSET_LSB 12 + +struct rx_msdu_end_qca99x0 { + __le32 ipv6_crc; + __le32 tcp_seq_no; + __le32 tcp_ack_no; + __le32 info1; + __le32 info2; +} __packed; + +struct rx_msdu_end_wcn3990 { + __le32 ipv6_crc; + __le32 tcp_seq_no; + __le32 tcp_ack_no; + __le32 info1; + __le32 info2; + __le32 rule_indication_0; + __le32 rule_indication_1; + __le32 rule_indication_2; + __le32 rule_indication_3; +} __packed; + +struct rx_msdu_end { + struct rx_msdu_end_common common; + union { + struct rx_msdu_end_qca99x0 qca99x0; + struct rx_msdu_end_wcn3990 wcn3990; + } __packed; +} __packed; + +/* + *ip_hdr_chksum + * This can include the IP header checksum or the pseudo header + * checksum used by TCP/UDP checksum. + * + *tcp_udp_chksum + * The value of the computed TCP/UDP checksum. A mode bit + * selects whether this checksum is the full checksum or the + * partial checksum which does not include the pseudo header. + * + *key_id_octet + * The key ID octet from the IV. Only valid when first_msdu is + * set. + * + *classification_filter + * Indicates the number classification filter rule + * + *ext_wapi_pn_63_48 + * Extension PN (packet number) which is only used by WAPI. + * This corresponds to WAPI PN bits [63:48] (pn6 and pn7). The + * WAPI PN bits [63:0] are in the pn field of the rx_mpdu_start + * descriptor. + * + *ext_wapi_pn_95_64 + * Extension PN (packet number) which is only used by WAPI. + * This corresponds to WAPI PN bits [95:64] (pn8, pn9, pn10 and + * pn11). + * + *ext_wapi_pn_127_96 + * Extension PN (packet number) which is only used by WAPI. + * This corresponds to WAPI PN bits [127:96] (pn12, pn13, pn14, + * pn15). + * + *reported_mpdu_length + * MPDU length before decapsulation. Only valid when + * first_msdu is set. This field is taken directly from the + * length field of the A-MPDU delimiter or the preamble length + * field for non-A-MPDU frames. + * + *first_msdu + * Indicates the first MSDU of A-MSDU. If both first_msdu and + * last_msdu are set in the MSDU then this is a non-aggregated + * MSDU frame: normal MPDU. Interior MSDU in an A-MSDU shall + * have both first_mpdu and last_mpdu bits set to 0. + * + *last_msdu + * Indicates the last MSDU of the A-MSDU. MPDU end status is + * only valid when last_msdu is set. + * + *reserved_3a + * Reserved: HW should fill with zero. FW should ignore. + * + *pre_delim_err + * Indicates that the first delimiter had a FCS failure. Only + * valid when first_mpdu and first_msdu are set. + * + *reserved_3b + * Reserved: HW should fill with zero. FW should ignore. + */ + +#define HTT_RX_PPDU_START_PREAMBLE_LEGACY 0x04 +#define HTT_RX_PPDU_START_PREAMBLE_HT 0x08 +#define HTT_RX_PPDU_START_PREAMBLE_HT_WITH_TXBF 0x09 +#define HTT_RX_PPDU_START_PREAMBLE_VHT 0x0C +#define HTT_RX_PPDU_START_PREAMBLE_VHT_WITH_TXBF 0x0D + +#define RX_PPDU_START_INFO0_IS_GREENFIELD BIT(0) + +#define RX_PPDU_START_INFO1_L_SIG_RATE_MASK 0x0000000f +#define RX_PPDU_START_INFO1_L_SIG_RATE_LSB 0 +#define RX_PPDU_START_INFO1_L_SIG_LENGTH_MASK 0x0001ffe0 +#define RX_PPDU_START_INFO1_L_SIG_LENGTH_LSB 5 +#define RX_PPDU_START_INFO1_L_SIG_TAIL_MASK 0x00fc0000 +#define RX_PPDU_START_INFO1_L_SIG_TAIL_LSB 18 +#define RX_PPDU_START_INFO1_PREAMBLE_TYPE_MASK 0xff000000 +#define RX_PPDU_START_INFO1_PREAMBLE_TYPE_LSB 24 +#define RX_PPDU_START_INFO1_L_SIG_RATE_SELECT BIT(4) +#define RX_PPDU_START_INFO1_L_SIG_PARITY BIT(17) + +#define RX_PPDU_START_INFO2_HT_SIG_VHT_SIG_A_1_MASK 0x00ffffff +#define RX_PPDU_START_INFO2_HT_SIG_VHT_SIG_A_1_LSB 0 + +#define RX_PPDU_START_INFO3_HT_SIG_VHT_SIG_A_2_MASK 0x00ffffff +#define RX_PPDU_START_INFO3_HT_SIG_VHT_SIG_A_2_LSB 0 +#define RX_PPDU_START_INFO3_TXBF_H_INFO BIT(24) + +#define RX_PPDU_START_INFO4_VHT_SIG_B_MASK 0x1fffffff +#define RX_PPDU_START_INFO4_VHT_SIG_B_LSB 0 + +#define RX_PPDU_START_INFO5_SERVICE_MASK 0x0000ffff +#define RX_PPDU_START_INFO5_SERVICE_LSB 0 + +/* No idea what this flag means. It seems to be always set in rate. */ +#define RX_PPDU_START_RATE_FLAG BIT(3) + +struct rx_ppdu_start { + struct { + u8 pri20_mhz; + u8 ext20_mhz; + u8 ext40_mhz; + u8 ext80_mhz; + } rssi_chains[4]; + u8 rssi_comb; + __le16 rsvd0; + u8 info0; /* %RX_PPDU_START_INFO0_ */ + __le32 info1; /* %RX_PPDU_START_INFO1_ */ + __le32 info2; /* %RX_PPDU_START_INFO2_ */ + __le32 info3; /* %RX_PPDU_START_INFO3_ */ + __le32 info4; /* %RX_PPDU_START_INFO4_ */ + __le32 info5; /* %RX_PPDU_START_INFO5_ */ +} __packed; + +/* + * rssi_chain0_pri20 + * RSSI of RX PPDU on chain 0 of primary 20 MHz bandwidth. + * Value of 0x80 indicates invalid. + * + * rssi_chain0_sec20 + * RSSI of RX PPDU on chain 0 of secondary 20 MHz bandwidth. + * Value of 0x80 indicates invalid. + * + * rssi_chain0_sec40 + * RSSI of RX PPDU on chain 0 of secondary 40 MHz bandwidth. + * Value of 0x80 indicates invalid. + * + * rssi_chain0_sec80 + * RSSI of RX PPDU on chain 0 of secondary 80 MHz bandwidth. + * Value of 0x80 indicates invalid. + * + * rssi_chain1_pri20 + * RSSI of RX PPDU on chain 1 of primary 20 MHz bandwidth. + * Value of 0x80 indicates invalid. + * + * rssi_chain1_sec20 + * RSSI of RX PPDU on chain 1 of secondary 20 MHz bandwidth. + * Value of 0x80 indicates invalid. + * + * rssi_chain1_sec40 + * RSSI of RX PPDU on chain 1 of secondary 40 MHz bandwidth. + * Value of 0x80 indicates invalid. + * + * rssi_chain1_sec80 + * RSSI of RX PPDU on chain 1 of secondary 80 MHz bandwidth. + * Value of 0x80 indicates invalid. + * + * rssi_chain2_pri20 + * RSSI of RX PPDU on chain 2 of primary 20 MHz bandwidth. + * Value of 0x80 indicates invalid. + * + * rssi_chain2_sec20 + * RSSI of RX PPDU on chain 2 of secondary 20 MHz bandwidth. + * Value of 0x80 indicates invalid. + * + * rssi_chain2_sec40 + * RSSI of RX PPDU on chain 2 of secondary 40 MHz bandwidth. + * Value of 0x80 indicates invalid. + * + * rssi_chain2_sec80 + * RSSI of RX PPDU on chain 2 of secondary 80 MHz bandwidth. + * Value of 0x80 indicates invalid. + * + * rssi_chain3_pri20 + * RSSI of RX PPDU on chain 3 of primary 20 MHz bandwidth. + * Value of 0x80 indicates invalid. + * + * rssi_chain3_sec20 + * RSSI of RX PPDU on chain 3 of secondary 20 MHz bandwidth. + * Value of 0x80 indicates invalid. + * + * rssi_chain3_sec40 + * RSSI of RX PPDU on chain 3 of secondary 40 MHz bandwidth. + * Value of 0x80 indicates invalid. + * + * rssi_chain3_sec80 + * RSSI of RX PPDU on chain 3 of secondary 80 MHz bandwidth. + * Value of 0x80 indicates invalid. + * + * rssi_comb + * The combined RSSI of RX PPDU of all active chains and + * bandwidths. Value of 0x80 indicates invalid. + * + * reserved_4a + * Reserved: HW should fill with 0, FW should ignore. + * + * is_greenfield + * Do we really support this? + * + * reserved_4b + * Reserved: HW should fill with 0, FW should ignore. + * + * l_sig_rate + * If l_sig_rate_select is 0: + * 0x8: OFDM 48 Mbps + * 0x9: OFDM 24 Mbps + * 0xA: OFDM 12 Mbps + * 0xB: OFDM 6 Mbps + * 0xC: OFDM 54 Mbps + * 0xD: OFDM 36 Mbps + * 0xE: OFDM 18 Mbps + * 0xF: OFDM 9 Mbps + * If l_sig_rate_select is 1: + * 0x8: CCK 11 Mbps long preamble + * 0x9: CCK 5.5 Mbps long preamble + * 0xA: CCK 2 Mbps long preamble + * 0xB: CCK 1 Mbps long preamble + * 0xC: CCK 11 Mbps short preamble + * 0xD: CCK 5.5 Mbps short preamble + * 0xE: CCK 2 Mbps short preamble + * + * l_sig_rate_select + * Legacy signal rate select. If set then l_sig_rate indicates + * CCK rates. If clear then l_sig_rate indicates OFDM rates. + * + * l_sig_length + * Length of legacy frame in octets. + * + * l_sig_parity + * Odd parity over l_sig_rate and l_sig_length + * + * l_sig_tail + * Tail bits for Viterbi decoder + * + * preamble_type + * Indicates the type of preamble ahead: + * 0x4: Legacy (OFDM/CCK) + * 0x8: HT + * 0x9: HT with TxBF + * 0xC: VHT + * 0xD: VHT with TxBF + * 0x80 - 0xFF: Reserved for special baseband data types such + * as radar and spectral scan. + * + * ht_sig_vht_sig_a_1 + * If preamble_type == 0x8 or 0x9 + * HT-SIG (first 24 bits) + * If preamble_type == 0xC or 0xD + * VHT-SIG A (first 24 bits) + * Else + * Reserved + * + * reserved_6 + * Reserved: HW should fill with 0, FW should ignore. + * + * ht_sig_vht_sig_a_2 + * If preamble_type == 0x8 or 0x9 + * HT-SIG (last 24 bits) + * If preamble_type == 0xC or 0xD + * VHT-SIG A (last 24 bits) + * Else + * Reserved + * + * txbf_h_info + * Indicates that the packet data carries H information which + * is used for TxBF debug. + * + * reserved_7 + * Reserved: HW should fill with 0, FW should ignore. + * + * vht_sig_b + * WiFi 1.0 and WiFi 2.0 will likely have this field to be all + * 0s since the BB does not plan on decoding VHT SIG-B. + * + * reserved_8 + * Reserved: HW should fill with 0, FW should ignore. + * + * service + * Service field from BB for OFDM, HT and VHT packets. CCK + * packets will have service field of 0. + * + * reserved_9 + * Reserved: HW should fill with 0, FW should ignore. + */ + +#define RX_PPDU_END_FLAGS_PHY_ERR BIT(0) +#define RX_PPDU_END_FLAGS_RX_LOCATION BIT(1) +#define RX_PPDU_END_FLAGS_TXBF_H_INFO BIT(2) + +#define RX_PPDU_END_INFO0_RX_ANTENNA_MASK 0x00ffffff +#define RX_PPDU_END_INFO0_RX_ANTENNA_LSB 0 +#define RX_PPDU_END_INFO0_FLAGS_TX_HT_VHT_ACK BIT(24) +#define RX_PPDU_END_INFO0_BB_CAPTURED_CHANNEL BIT(25) + +#define RX_PPDU_END_INFO1_PEER_IDX_MASK 0x1ffc +#define RX_PPDU_END_INFO1_PEER_IDX_LSB 2 +#define RX_PPDU_END_INFO1_BB_DATA BIT(0) +#define RX_PPDU_END_INFO1_PEER_IDX_VALID BIT(1) +#define RX_PPDU_END_INFO1_PPDU_DONE BIT(15) + +struct rx_ppdu_end_common { + __le32 evm_p0; + __le32 evm_p1; + __le32 evm_p2; + __le32 evm_p3; + __le32 evm_p4; + __le32 evm_p5; + __le32 evm_p6; + __le32 evm_p7; + __le32 evm_p8; + __le32 evm_p9; + __le32 evm_p10; + __le32 evm_p11; + __le32 evm_p12; + __le32 evm_p13; + __le32 evm_p14; + __le32 evm_p15; + __le32 tsf_timestamp; + __le32 wb_timestamp; +} __packed; + +struct rx_ppdu_end_qca988x { + u8 locationing_timestamp; + u8 phy_err_code; + __le16 flags; /* %RX_PPDU_END_FLAGS_ */ + __le32 info0; /* %RX_PPDU_END_INFO0_ */ + __le16 bb_length; + __le16 info1; /* %RX_PPDU_END_INFO1_ */ +} __packed; + +#define RX_PPDU_END_RTT_CORRELATION_VALUE_MASK 0x00ffffff +#define RX_PPDU_END_RTT_CORRELATION_VALUE_LSB 0 +#define RX_PPDU_END_RTT_UNUSED_MASK 0x7f000000 +#define RX_PPDU_END_RTT_UNUSED_LSB 24 +#define RX_PPDU_END_RTT_NORMAL_MODE BIT(31) + +struct rx_ppdu_end_qca6174 { + u8 locationing_timestamp; + u8 phy_err_code; + __le16 flags; /* %RX_PPDU_END_FLAGS_ */ + __le32 info0; /* %RX_PPDU_END_INFO0_ */ + __le32 rtt; /* %RX_PPDU_END_RTT_ */ + __le16 bb_length; + __le16 info1; /* %RX_PPDU_END_INFO1_ */ +} __packed; + +#define RX_PKT_END_INFO0_RX_SUCCESS BIT(0) +#define RX_PKT_END_INFO0_ERR_TX_INTERRUPT_RX BIT(3) +#define RX_PKT_END_INFO0_ERR_OFDM_POWER_DROP BIT(4) +#define RX_PKT_END_INFO0_ERR_OFDM_RESTART BIT(5) +#define RX_PKT_END_INFO0_ERR_CCK_POWER_DROP BIT(6) +#define RX_PKT_END_INFO0_ERR_CCK_RESTART BIT(7) + +#define RX_LOCATION_INFO_RTT_CORR_VAL_MASK 0x0001ffff +#define RX_LOCATION_INFO_RTT_CORR_VAL_LSB 0 +#define RX_LOCATION_INFO_FAC_STATUS_MASK 0x000c0000 +#define RX_LOCATION_INFO_FAC_STATUS_LSB 18 +#define RX_LOCATION_INFO_PKT_BW_MASK 0x00700000 +#define RX_LOCATION_INFO_PKT_BW_LSB 20 +#define RX_LOCATION_INFO_RTT_TX_FRAME_PHASE_MASK 0x01800000 +#define RX_LOCATION_INFO_RTT_TX_FRAME_PHASE_LSB 23 +#define RX_LOCATION_INFO_CIR_STATUS BIT(17) +#define RX_LOCATION_INFO_RTT_MAC_PHY_PHASE BIT(25) +#define RX_LOCATION_INFO_RTT_TX_DATA_START_X BIT(26) +#define RX_LOCATION_INFO_HW_IFFT_MODE BIT(30) +#define RX_LOCATION_INFO_RX_LOCATION_VALID BIT(31) + +struct rx_pkt_end { + __le32 info0; /* %RX_PKT_END_INFO0_ */ + __le32 phy_timestamp_1; + __le32 phy_timestamp_2; +} __packed; + +struct rx_pkt_end_wcn3990 { + __le32 info0; /* %RX_PKT_END_INFO0_ */ + __le64 phy_timestamp_1; + __le64 phy_timestamp_2; +} __packed; + +#define RX_LOCATION_INFO0_RTT_FAC_LEGACY_MASK 0x00003fff +#define RX_LOCATION_INFO0_RTT_FAC_LEGACY_LSB 0 +#define RX_LOCATION_INFO0_RTT_FAC_VHT_MASK 0x1fff8000 +#define RX_LOCATION_INFO0_RTT_FAC_VHT_LSB 15 +#define RX_LOCATION_INFO0_RTT_STRONGEST_CHAIN_MASK 0xc0000000 +#define RX_LOCATION_INFO0_RTT_STRONGEST_CHAIN_LSB 30 +#define RX_LOCATION_INFO0_RTT_FAC_LEGACY_STATUS BIT(14) +#define RX_LOCATION_INFO0_RTT_FAC_VHT_STATUS BIT(29) + +#define RX_LOCATION_INFO1_RTT_PREAMBLE_TYPE_MASK 0x0000000c +#define RX_LOCATION_INFO1_RTT_PREAMBLE_TYPE_LSB 2 +#define RX_LOCATION_INFO1_PKT_BW_MASK 0x00000030 +#define RX_LOCATION_INFO1_PKT_BW_LSB 4 +#define RX_LOCATION_INFO1_SKIP_P_SKIP_BTCF_MASK 0x0000ff00 +#define RX_LOCATION_INFO1_SKIP_P_SKIP_BTCF_LSB 8 +#define RX_LOCATION_INFO1_RTT_MSC_RATE_MASK 0x000f0000 +#define RX_LOCATION_INFO1_RTT_MSC_RATE_LSB 16 +#define RX_LOCATION_INFO1_RTT_PBD_LEG_BW_MASK 0x00300000 +#define RX_LOCATION_INFO1_RTT_PBD_LEG_BW_LSB 20 +#define RX_LOCATION_INFO1_TIMING_BACKOFF_MASK 0x07c00000 +#define RX_LOCATION_INFO1_TIMING_BACKOFF_LSB 22 +#define RX_LOCATION_INFO1_RTT_TX_FRAME_PHASE_MASK 0x18000000 +#define RX_LOCATION_INFO1_RTT_TX_FRAME_PHASE_LSB 27 +#define RX_LOCATION_INFO1_RTT_CFR_STATUS BIT(0) +#define RX_LOCATION_INFO1_RTT_CIR_STATUS BIT(1) +#define RX_LOCATION_INFO1_RTT_GI_TYPE BIT(7) +#define RX_LOCATION_INFO1_RTT_MAC_PHY_PHASE BIT(29) +#define RX_LOCATION_INFO1_RTT_TX_DATA_START_X_PHASE BIT(30) +#define RX_LOCATION_INFO1_RX_LOCATION_VALID BIT(31) + +struct rx_location_info { + __le32 rx_location_info0; /* %RX_LOCATION_INFO0_ */ + __le32 rx_location_info1; /* %RX_LOCATION_INFO1_ */ +} __packed; + +struct rx_location_info_wcn3990 { + __le32 rx_location_info0; /* %RX_LOCATION_INFO0_ */ + __le32 rx_location_info1; /* %RX_LOCATION_INFO1_ */ + __le32 rx_location_info2; /* %RX_LOCATION_INFO2_ */ +} __packed; + +enum rx_phy_ppdu_end_info0 { + RX_PHY_PPDU_END_INFO0_ERR_RADAR = BIT(2), + RX_PHY_PPDU_END_INFO0_ERR_RX_ABORT = BIT(3), + RX_PHY_PPDU_END_INFO0_ERR_RX_NAP = BIT(4), + RX_PHY_PPDU_END_INFO0_ERR_OFDM_TIMING = BIT(5), + RX_PHY_PPDU_END_INFO0_ERR_OFDM_PARITY = BIT(6), + RX_PHY_PPDU_END_INFO0_ERR_OFDM_RATE = BIT(7), + RX_PHY_PPDU_END_INFO0_ERR_OFDM_LENGTH = BIT(8), + RX_PHY_PPDU_END_INFO0_ERR_OFDM_RESTART = BIT(9), + RX_PHY_PPDU_END_INFO0_ERR_OFDM_SERVICE = BIT(10), + RX_PHY_PPDU_END_INFO0_ERR_OFDM_POWER_DROP = BIT(11), + RX_PHY_PPDU_END_INFO0_ERR_CCK_BLOCKER = BIT(12), + RX_PHY_PPDU_END_INFO0_ERR_CCK_TIMING = BIT(13), + RX_PHY_PPDU_END_INFO0_ERR_CCK_HEADER_CRC = BIT(14), + RX_PHY_PPDU_END_INFO0_ERR_CCK_RATE = BIT(15), + RX_PHY_PPDU_END_INFO0_ERR_CCK_LENGTH = BIT(16), + RX_PHY_PPDU_END_INFO0_ERR_CCK_RESTART = BIT(17), + RX_PHY_PPDU_END_INFO0_ERR_CCK_SERVICE = BIT(18), + RX_PHY_PPDU_END_INFO0_ERR_CCK_POWER_DROP = BIT(19), + RX_PHY_PPDU_END_INFO0_ERR_HT_CRC = BIT(20), + RX_PHY_PPDU_END_INFO0_ERR_HT_LENGTH = BIT(21), + RX_PHY_PPDU_END_INFO0_ERR_HT_RATE = BIT(22), + RX_PHY_PPDU_END_INFO0_ERR_HT_ZLF = BIT(23), + RX_PHY_PPDU_END_INFO0_ERR_FALSE_RADAR_EXT = BIT(24), + RX_PHY_PPDU_END_INFO0_ERR_GREEN_FIELD = BIT(25), + RX_PHY_PPDU_END_INFO0_ERR_SPECTRAL_SCAN = BIT(26), + RX_PHY_PPDU_END_INFO0_ERR_RX_DYN_BW = BIT(27), + RX_PHY_PPDU_END_INFO0_ERR_LEG_HT_MISMATCH = BIT(28), + RX_PHY_PPDU_END_INFO0_ERR_VHT_CRC = BIT(29), + RX_PHY_PPDU_END_INFO0_ERR_VHT_SIGA = BIT(30), + RX_PHY_PPDU_END_INFO0_ERR_VHT_LSIG = BIT(31), +}; + +enum rx_phy_ppdu_end_info1 { + RX_PHY_PPDU_END_INFO1_ERR_VHT_NDP = BIT(0), + RX_PHY_PPDU_END_INFO1_ERR_VHT_NSYM = BIT(1), + RX_PHY_PPDU_END_INFO1_ERR_VHT_RX_EXT_SYM = BIT(2), + RX_PHY_PPDU_END_INFO1_ERR_VHT_RX_SKIP_ID0 = BIT(3), + RX_PHY_PPDU_END_INFO1_ERR_VHT_RX_SKIP_ID1_62 = BIT(4), + RX_PHY_PPDU_END_INFO1_ERR_VHT_RX_SKIP_ID63 = BIT(5), + RX_PHY_PPDU_END_INFO1_ERR_OFDM_LDPC_DECODER = BIT(6), + RX_PHY_PPDU_END_INFO1_ERR_DEFER_NAP = BIT(7), + RX_PHY_PPDU_END_INFO1_ERR_FDOMAIN_TIMEOUT = BIT(8), + RX_PHY_PPDU_END_INFO1_ERR_LSIG_REL_CHECK = BIT(9), + RX_PHY_PPDU_END_INFO1_ERR_BT_COLLISION = BIT(10), + RX_PHY_PPDU_END_INFO1_ERR_MU_FEEDBACK = BIT(11), + RX_PHY_PPDU_END_INFO1_ERR_TX_INTERRUPT_RX = BIT(12), + RX_PHY_PPDU_END_INFO1_ERR_RX_CBF = BIT(13), +}; + +struct rx_phy_ppdu_end { + __le32 info0; /* %RX_PHY_PPDU_END_INFO0_ */ + __le32 info1; /* %RX_PHY_PPDU_END_INFO1_ */ +} __packed; + +#define RX_PPDU_END_RX_TIMING_OFFSET_MASK 0x00000fff +#define RX_PPDU_END_RX_TIMING_OFFSET_LSB 0 + +#define RX_PPDU_END_RX_INFO_RX_ANTENNA_MASK 0x00ffffff +#define RX_PPDU_END_RX_INFO_RX_ANTENNA_LSB 0 +#define RX_PPDU_END_RX_INFO_TX_HT_VHT_ACK BIT(24) +#define RX_PPDU_END_RX_INFO_RX_PKT_END_VALID BIT(25) +#define RX_PPDU_END_RX_INFO_RX_PHY_PPDU_END_VALID BIT(26) +#define RX_PPDU_END_RX_INFO_RX_TIMING_OFFSET_VALID BIT(27) +#define RX_PPDU_END_RX_INFO_BB_CAPTURED_CHANNEL BIT(28) +#define RX_PPDU_END_RX_INFO_UNSUPPORTED_MU_NC BIT(29) +#define RX_PPDU_END_RX_INFO_OTP_TXBF_DISABLE BIT(30) + +struct rx_ppdu_end_qca99x0 { + struct rx_pkt_end rx_pkt_end; + __le32 rx_location_info; /* %RX_LOCATION_INFO_ */ + struct rx_phy_ppdu_end rx_phy_ppdu_end; + __le32 rx_timing_offset; /* %RX_PPDU_END_RX_TIMING_OFFSET_ */ + __le32 rx_info; /* %RX_PPDU_END_RX_INFO_ */ + __le16 bb_length; + __le16 info1; /* %RX_PPDU_END_INFO1_ */ +} __packed; + +struct rx_ppdu_end_qca9984 { + struct rx_pkt_end rx_pkt_end; + struct rx_location_info rx_location_info; + struct rx_phy_ppdu_end rx_phy_ppdu_end; + __le32 rx_timing_offset; /* %RX_PPDU_END_RX_TIMING_OFFSET_ */ + __le32 rx_info; /* %RX_PPDU_END_RX_INFO_ */ + __le16 bb_length; + __le16 info1; /* %RX_PPDU_END_INFO1_ */ +} __packed; + +struct rx_ppdu_end_wcn3990 { + struct rx_pkt_end_wcn3990 rx_pkt_end; + struct rx_location_info_wcn3990 rx_location_info; + struct rx_phy_ppdu_end rx_phy_ppdu_end; + __le32 rx_timing_offset; + __le32 reserved_info_0; + __le32 reserved_info_1; + __le32 rx_antenna_info; + __le32 rx_coex_info; + __le32 rx_mpdu_cnt_info; + __le64 phy_timestamp_tx; + __le32 rx_bb_length; +} __packed; + +struct rx_ppdu_end { + struct rx_ppdu_end_common common; + union { + struct rx_ppdu_end_qca988x qca988x; + struct rx_ppdu_end_qca6174 qca6174; + struct rx_ppdu_end_qca99x0 qca99x0; + struct rx_ppdu_end_qca9984 qca9984; + struct rx_ppdu_end_wcn3990 wcn3990; + } __packed; +} __packed; + +/* + * evm_p0 + * EVM for pilot 0. Contain EVM for streams: 0, 1, 2 and 3. + * + * evm_p1 + * EVM for pilot 1. Contain EVM for streams: 0, 1, 2 and 3. + * + * evm_p2 + * EVM for pilot 2. Contain EVM for streams: 0, 1, 2 and 3. + * + * evm_p3 + * EVM for pilot 3. Contain EVM for streams: 0, 1, 2 and 3. + * + * evm_p4 + * EVM for pilot 4. Contain EVM for streams: 0, 1, 2 and 3. + * + * evm_p5 + * EVM for pilot 5. Contain EVM for streams: 0, 1, 2 and 3. + * + * evm_p6 + * EVM for pilot 6. Contain EVM for streams: 0, 1, 2 and 3. + * + * evm_p7 + * EVM for pilot 7. Contain EVM for streams: 0, 1, 2 and 3. + * + * evm_p8 + * EVM for pilot 8. Contain EVM for streams: 0, 1, 2 and 3. + * + * evm_p9 + * EVM for pilot 9. Contain EVM for streams: 0, 1, 2 and 3. + * + * evm_p10 + * EVM for pilot 10. Contain EVM for streams: 0, 1, 2 and 3. + * + * evm_p11 + * EVM for pilot 11. Contain EVM for streams: 0, 1, 2 and 3. + * + * evm_p12 + * EVM for pilot 12. Contain EVM for streams: 0, 1, 2 and 3. + * + * evm_p13 + * EVM for pilot 13. Contain EVM for streams: 0, 1, 2 and 3. + * + * evm_p14 + * EVM for pilot 14. Contain EVM for streams: 0, 1, 2 and 3. + * + * evm_p15 + * EVM for pilot 15. Contain EVM for streams: 0, 1, 2 and 3. + * + * tsf_timestamp + * Receive TSF timestamp sampled on the rising edge of + * rx_clear. For PHY errors this may be the current TSF when + * phy_error is asserted if the rx_clear does not assert before + * the end of the PHY error. + * + * wb_timestamp + * WLAN/BT timestamp is a 1 usec resolution timestamp which + * does not get updated based on receive beacon like TSF. The + * same rules for capturing tsf_timestamp are used to capture + * the wb_timestamp. + * + * locationing_timestamp + * Timestamp used for locationing. This timestamp is used to + * indicate fractions of usec. For example if the MAC clock is + * running at 80 MHz, the timestamp will increment every 12.5 + * nsec. The value starts at 0 and increments to 79 and + * returns to 0 and repeats. This information is valid for + * every PPDU. This information can be used in conjunction + * with wb_timestamp to capture large delta times. + * + * phy_err_code + * See the 1.10.8.1.2 for the list of the PHY error codes. + * + * phy_err + * Indicates a PHY error was detected for this PPDU. + * + * rx_location + * Indicates that location information was requested. + * + * txbf_h_info + * Indicates that the packet data carries H information which + * is used for TxBF debug. + * + * reserved_18 + * Reserved: HW should fill with 0, FW should ignore. + * + * rx_antenna + * Receive antenna value + * + * tx_ht_vht_ack + * Indicates that a HT or VHT Ack/BA frame was transmitted in + * response to this receive packet. + * + * bb_captured_channel + * Indicates that the BB has captured a channel dump. FW can + * then read the channel dump memory. This may indicate that + * the channel was captured either based on PCU setting the + * capture_channel bit BB descriptor or FW setting the + * capture_channel mode bit. + * + * reserved_19 + * Reserved: HW should fill with 0, FW should ignore. + * + * bb_length + * Indicates the number of bytes of baseband information for + * PPDUs where the BB descriptor preamble type is 0x80 to 0xFF + * which indicates that this is not a normal PPDU but rather + * contains baseband debug information. + * + * reserved_20 + * Reserved: HW should fill with 0, FW should ignore. + * + * ppdu_done + * PPDU end status is only valid when ppdu_done bit is set. + * Every time HW sets this bit in memory FW/SW must clear this + * bit in memory. FW will initialize all the ppdu_done dword + * to 0. + */ + +#define FW_RX_DESC_INFO0_DISCARD BIT(0) +#define FW_RX_DESC_INFO0_FORWARD BIT(1) +#define FW_RX_DESC_INFO0_INSPECT BIT(5) +#define FW_RX_DESC_INFO0_EXT_MASK 0xC0 +#define FW_RX_DESC_INFO0_EXT_LSB 6 + +struct fw_rx_desc_base { + u8 info0; +} __packed; + +#endif /* _RX_DESC_H_ */ |