summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath10k/wmi.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/wmi.h')
-rw-r--r--drivers/net/wireless/ath/ath10k/wmi.h6974
1 files changed, 6974 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
new file mode 100644
index 0000000..7a3606d
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -0,0 +1,6974 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _WMI_H_
+#define _WMI_H_
+
+#include <linux/types.h>
+#include <net/mac80211.h>
+
+/*
+ * This file specifies the WMI interface for the Unified Software
+ * Architecture.
+ *
+ * It includes definitions of all the commands and events. Commands are
+ * messages from the host to the target. Events and Replies are messages
+ * from the target to the host.
+ *
+ * Ownership of correctness in regards to WMI commands belongs to the host
+ * driver and the target is not required to validate parameters for value,
+ * proper range, or any other checking.
+ *
+ * Guidelines for extending this interface are below.
+ *
+ * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff
+ *
+ * 2. Use ONLY u32 type for defining member variables within WMI
+ * command/event structures. Do not use u8, u16, bool or
+ * enum types within these structures.
+ *
+ * 3. DO NOT define bit fields within structures. Implement bit fields
+ * using masks if necessary. Do not use the programming language's bit
+ * field definition.
+ *
+ * 4. Define macros for encode/decode of u8, u16 fields within
+ * the u32 variables. Use these macros for set/get of these fields.
+ * Try to use this to optimize the structure without bloating it with
+ * u32 variables for every lower sized field.
+ *
+ * 5. Do not use PACK/UNPACK attributes for the structures as each member
+ * variable is already 4-byte aligned by virtue of being a u32
+ * type.
+ *
+ * 6. Comment each parameter part of the WMI command/event structure by
+ * using the 2 stars at the beginning of C comment instead of one star to
+ * enable HTML document generation using Doxygen.
+ *
+ */
+
+/* Control Path */
+struct wmi_cmd_hdr {
+ __le32 cmd_id;
+} __packed;
+
+#define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF
+#define WMI_CMD_HDR_CMD_ID_LSB 0
+#define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000
+#define WMI_CMD_HDR_PLT_PRIV_LSB 24
+
+#define HTC_PROTOCOL_VERSION 0x0002
+#define WMI_PROTOCOL_VERSION 0x0002
+
+/*
+ * There is no signed version of __le32, so for a temporary solution come
+ * up with our own version. The idea is from fs/ntfs/endian.h.
+ *
+ * Use a_ prefix so that it doesn't conflict if we get proper support to
+ * linux/types.h.
+ */
+typedef __s32 __bitwise a_sle32;
+
+static inline a_sle32 a_cpu_to_sle32(s32 val)
+{
+ return (__force a_sle32)cpu_to_le32(val);
+}
+
+static inline s32 a_sle32_to_cpu(a_sle32 val)
+{
+ return le32_to_cpu((__force __le32)val);
+}
+
+enum wmi_service {
+ WMI_SERVICE_BEACON_OFFLOAD = 0,
+ WMI_SERVICE_SCAN_OFFLOAD,
+ WMI_SERVICE_ROAM_OFFLOAD,
+ WMI_SERVICE_BCN_MISS_OFFLOAD,
+ WMI_SERVICE_STA_PWRSAVE,
+ WMI_SERVICE_STA_ADVANCED_PWRSAVE,
+ WMI_SERVICE_AP_UAPSD,
+ WMI_SERVICE_AP_DFS,
+ WMI_SERVICE_11AC,
+ WMI_SERVICE_BLOCKACK,
+ WMI_SERVICE_PHYERR,
+ WMI_SERVICE_BCN_FILTER,
+ WMI_SERVICE_RTT,
+ WMI_SERVICE_RATECTRL,
+ WMI_SERVICE_WOW,
+ WMI_SERVICE_RATECTRL_CACHE,
+ WMI_SERVICE_IRAM_TIDS,
+ WMI_SERVICE_ARPNS_OFFLOAD,
+ WMI_SERVICE_NLO,
+ WMI_SERVICE_GTK_OFFLOAD,
+ WMI_SERVICE_SCAN_SCH,
+ WMI_SERVICE_CSA_OFFLOAD,
+ WMI_SERVICE_CHATTER,
+ WMI_SERVICE_COEX_FREQAVOID,
+ WMI_SERVICE_PACKET_POWER_SAVE,
+ WMI_SERVICE_FORCE_FW_HANG,
+ WMI_SERVICE_GPIO,
+ WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
+ WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
+ WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
+ WMI_SERVICE_STA_KEEP_ALIVE,
+ WMI_SERVICE_TX_ENCAP,
+ WMI_SERVICE_BURST,
+ WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT,
+ WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT,
+ WMI_SERVICE_ROAM_SCAN_OFFLOAD,
+ WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
+ WMI_SERVICE_EARLY_RX,
+ WMI_SERVICE_STA_SMPS,
+ WMI_SERVICE_FWTEST,
+ WMI_SERVICE_STA_WMMAC,
+ WMI_SERVICE_TDLS,
+ WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE,
+ WMI_SERVICE_ADAPTIVE_OCS,
+ WMI_SERVICE_BA_SSN_SUPPORT,
+ WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE,
+ WMI_SERVICE_WLAN_HB,
+ WMI_SERVICE_LTE_ANT_SHARE_SUPPORT,
+ WMI_SERVICE_BATCH_SCAN,
+ WMI_SERVICE_QPOWER,
+ WMI_SERVICE_PLMREQ,
+ WMI_SERVICE_THERMAL_MGMT,
+ WMI_SERVICE_RMC,
+ WMI_SERVICE_MHF_OFFLOAD,
+ WMI_SERVICE_COEX_SAR,
+ WMI_SERVICE_BCN_TXRATE_OVERRIDE,
+ WMI_SERVICE_NAN,
+ WMI_SERVICE_L1SS_STAT,
+ WMI_SERVICE_ESTIMATE_LINKSPEED,
+ WMI_SERVICE_OBSS_SCAN,
+ WMI_SERVICE_TDLS_OFFCHAN,
+ WMI_SERVICE_TDLS_UAPSD_BUFFER_STA,
+ WMI_SERVICE_TDLS_UAPSD_SLEEP_STA,
+ WMI_SERVICE_IBSS_PWRSAVE,
+ WMI_SERVICE_LPASS,
+ WMI_SERVICE_EXTSCAN,
+ WMI_SERVICE_D0WOW,
+ WMI_SERVICE_HSOFFLOAD,
+ WMI_SERVICE_ROAM_HO_OFFLOAD,
+ WMI_SERVICE_RX_FULL_REORDER,
+ WMI_SERVICE_DHCP_OFFLOAD,
+ WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT,
+ WMI_SERVICE_MDNS_OFFLOAD,
+ WMI_SERVICE_SAP_AUTH_OFFLOAD,
+ WMI_SERVICE_ATF,
+ WMI_SERVICE_COEX_GPIO,
+ WMI_SERVICE_ENHANCED_PROXY_STA,
+ WMI_SERVICE_TT,
+ WMI_SERVICE_PEER_CACHING,
+ WMI_SERVICE_AUX_SPECTRAL_INTF,
+ WMI_SERVICE_AUX_CHAN_LOAD_INTF,
+ WMI_SERVICE_BSS_CHANNEL_INFO_64,
+ WMI_SERVICE_EXT_RES_CFG_SUPPORT,
+ WMI_SERVICE_MESH_11S,
+ WMI_SERVICE_MESH_NON_11S,
+ WMI_SERVICE_PEER_STATS,
+ WMI_SERVICE_RESTRT_CHNL_SUPPORT,
+ WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
+ WMI_SERVICE_TX_MODE_PUSH_ONLY,
+ WMI_SERVICE_TX_MODE_PUSH_PULL,
+ WMI_SERVICE_TX_MODE_DYNAMIC,
+ WMI_SERVICE_VDEV_RX_FILTER,
+ WMI_SERVICE_BTCOEX,
+ WMI_SERVICE_CHECK_CAL_VERSION,
+ WMI_SERVICE_DBGLOG_WARN2,
+ WMI_SERVICE_BTCOEX_DUTY_CYCLE,
+ WMI_SERVICE_4_WIRE_COEX_SUPPORT,
+ WMI_SERVICE_EXTENDED_NSS_SUPPORT,
+ WMI_SERVICE_PROG_GPIO_BAND_SELECT,
+ WMI_SERVICE_SMART_LOGGING_SUPPORT,
+ WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
+ WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
+
+ /* keep last */
+ WMI_SERVICE_MAX,
+};
+
+enum wmi_10x_service {
+ WMI_10X_SERVICE_BEACON_OFFLOAD = 0,
+ WMI_10X_SERVICE_SCAN_OFFLOAD,
+ WMI_10X_SERVICE_ROAM_OFFLOAD,
+ WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
+ WMI_10X_SERVICE_STA_PWRSAVE,
+ WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
+ WMI_10X_SERVICE_AP_UAPSD,
+ WMI_10X_SERVICE_AP_DFS,
+ WMI_10X_SERVICE_11AC,
+ WMI_10X_SERVICE_BLOCKACK,
+ WMI_10X_SERVICE_PHYERR,
+ WMI_10X_SERVICE_BCN_FILTER,
+ WMI_10X_SERVICE_RTT,
+ WMI_10X_SERVICE_RATECTRL,
+ WMI_10X_SERVICE_WOW,
+ WMI_10X_SERVICE_RATECTRL_CACHE,
+ WMI_10X_SERVICE_IRAM_TIDS,
+ WMI_10X_SERVICE_BURST,
+
+ /* introduced in 10.2 */
+ WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
+ WMI_10X_SERVICE_FORCE_FW_HANG,
+ WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
+ WMI_10X_SERVICE_ATF,
+ WMI_10X_SERVICE_COEX_GPIO,
+ WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
+ WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
+ WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
+ WMI_10X_SERVICE_MESH,
+ WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
+ WMI_10X_SERVICE_PEER_STATS,
+};
+
+enum wmi_main_service {
+ WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0,
+ WMI_MAIN_SERVICE_SCAN_OFFLOAD,
+ WMI_MAIN_SERVICE_ROAM_OFFLOAD,
+ WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
+ WMI_MAIN_SERVICE_STA_PWRSAVE,
+ WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
+ WMI_MAIN_SERVICE_AP_UAPSD,
+ WMI_MAIN_SERVICE_AP_DFS,
+ WMI_MAIN_SERVICE_11AC,
+ WMI_MAIN_SERVICE_BLOCKACK,
+ WMI_MAIN_SERVICE_PHYERR,
+ WMI_MAIN_SERVICE_BCN_FILTER,
+ WMI_MAIN_SERVICE_RTT,
+ WMI_MAIN_SERVICE_RATECTRL,
+ WMI_MAIN_SERVICE_WOW,
+ WMI_MAIN_SERVICE_RATECTRL_CACHE,
+ WMI_MAIN_SERVICE_IRAM_TIDS,
+ WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
+ WMI_MAIN_SERVICE_NLO,
+ WMI_MAIN_SERVICE_GTK_OFFLOAD,
+ WMI_MAIN_SERVICE_SCAN_SCH,
+ WMI_MAIN_SERVICE_CSA_OFFLOAD,
+ WMI_MAIN_SERVICE_CHATTER,
+ WMI_MAIN_SERVICE_COEX_FREQAVOID,
+ WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
+ WMI_MAIN_SERVICE_FORCE_FW_HANG,
+ WMI_MAIN_SERVICE_GPIO,
+ WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
+ WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
+ WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
+ WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
+ WMI_MAIN_SERVICE_TX_ENCAP,
+};
+
+enum wmi_10_4_service {
+ WMI_10_4_SERVICE_BEACON_OFFLOAD = 0,
+ WMI_10_4_SERVICE_SCAN_OFFLOAD,
+ WMI_10_4_SERVICE_ROAM_OFFLOAD,
+ WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
+ WMI_10_4_SERVICE_STA_PWRSAVE,
+ WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
+ WMI_10_4_SERVICE_AP_UAPSD,
+ WMI_10_4_SERVICE_AP_DFS,
+ WMI_10_4_SERVICE_11AC,
+ WMI_10_4_SERVICE_BLOCKACK,
+ WMI_10_4_SERVICE_PHYERR,
+ WMI_10_4_SERVICE_BCN_FILTER,
+ WMI_10_4_SERVICE_RTT,
+ WMI_10_4_SERVICE_RATECTRL,
+ WMI_10_4_SERVICE_WOW,
+ WMI_10_4_SERVICE_RATECTRL_CACHE,
+ WMI_10_4_SERVICE_IRAM_TIDS,
+ WMI_10_4_SERVICE_BURST,
+ WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
+ WMI_10_4_SERVICE_GTK_OFFLOAD,
+ WMI_10_4_SERVICE_SCAN_SCH,
+ WMI_10_4_SERVICE_CSA_OFFLOAD,
+ WMI_10_4_SERVICE_CHATTER,
+ WMI_10_4_SERVICE_COEX_FREQAVOID,
+ WMI_10_4_SERVICE_PACKET_POWER_SAVE,
+ WMI_10_4_SERVICE_FORCE_FW_HANG,
+ WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
+ WMI_10_4_SERVICE_GPIO,
+ WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
+ WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
+ WMI_10_4_SERVICE_STA_KEEP_ALIVE,
+ WMI_10_4_SERVICE_TX_ENCAP,
+ WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
+ WMI_10_4_SERVICE_EARLY_RX,
+ WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
+ WMI_10_4_SERVICE_TT,
+ WMI_10_4_SERVICE_ATF,
+ WMI_10_4_SERVICE_PEER_CACHING,
+ WMI_10_4_SERVICE_COEX_GPIO,
+ WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
+ WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
+ WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
+ WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
+ WMI_10_4_SERVICE_MESH_NON_11S,
+ WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
+ WMI_10_4_SERVICE_PEER_STATS,
+ WMI_10_4_SERVICE_MESH_11S,
+ WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
+ WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
+ WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
+ WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
+ WMI_10_4_SERVICE_VDEV_RX_FILTER,
+ WMI_10_4_SERVICE_BTCOEX,
+ WMI_10_4_SERVICE_CHECK_CAL_VERSION,
+ WMI_10_4_SERVICE_DBGLOG_WARN2,
+ WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
+ WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
+ WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
+ WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
+ WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
+ WMI_10_4_SERVICE_TDLS,
+ WMI_10_4_SERVICE_TDLS_OFFCHAN,
+ WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
+ WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
+ WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
+ WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
+};
+
+static inline char *wmi_service_name(int service_id)
+{
+#define SVCSTR(x) case x: return #x
+
+ switch (service_id) {
+ SVCSTR(WMI_SERVICE_BEACON_OFFLOAD);
+ SVCSTR(WMI_SERVICE_SCAN_OFFLOAD);
+ SVCSTR(WMI_SERVICE_ROAM_OFFLOAD);
+ SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD);
+ SVCSTR(WMI_SERVICE_STA_PWRSAVE);
+ SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE);
+ SVCSTR(WMI_SERVICE_AP_UAPSD);
+ SVCSTR(WMI_SERVICE_AP_DFS);
+ SVCSTR(WMI_SERVICE_11AC);
+ SVCSTR(WMI_SERVICE_BLOCKACK);
+ SVCSTR(WMI_SERVICE_PHYERR);
+ SVCSTR(WMI_SERVICE_BCN_FILTER);
+ SVCSTR(WMI_SERVICE_RTT);
+ SVCSTR(WMI_SERVICE_RATECTRL);
+ SVCSTR(WMI_SERVICE_WOW);
+ SVCSTR(WMI_SERVICE_RATECTRL_CACHE);
+ SVCSTR(WMI_SERVICE_IRAM_TIDS);
+ SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD);
+ SVCSTR(WMI_SERVICE_NLO);
+ SVCSTR(WMI_SERVICE_GTK_OFFLOAD);
+ SVCSTR(WMI_SERVICE_SCAN_SCH);
+ SVCSTR(WMI_SERVICE_CSA_OFFLOAD);
+ SVCSTR(WMI_SERVICE_CHATTER);
+ SVCSTR(WMI_SERVICE_COEX_FREQAVOID);
+ SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE);
+ SVCSTR(WMI_SERVICE_FORCE_FW_HANG);
+ SVCSTR(WMI_SERVICE_GPIO);
+ SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM);
+ SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG);
+ SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG);
+ SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE);
+ SVCSTR(WMI_SERVICE_TX_ENCAP);
+ SVCSTR(WMI_SERVICE_BURST);
+ SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT);
+ SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT);
+ SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD);
+ SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC);
+ SVCSTR(WMI_SERVICE_EARLY_RX);
+ SVCSTR(WMI_SERVICE_STA_SMPS);
+ SVCSTR(WMI_SERVICE_FWTEST);
+ SVCSTR(WMI_SERVICE_STA_WMMAC);
+ SVCSTR(WMI_SERVICE_TDLS);
+ SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE);
+ SVCSTR(WMI_SERVICE_ADAPTIVE_OCS);
+ SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT);
+ SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE);
+ SVCSTR(WMI_SERVICE_WLAN_HB);
+ SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT);
+ SVCSTR(WMI_SERVICE_BATCH_SCAN);
+ SVCSTR(WMI_SERVICE_QPOWER);
+ SVCSTR(WMI_SERVICE_PLMREQ);
+ SVCSTR(WMI_SERVICE_THERMAL_MGMT);
+ SVCSTR(WMI_SERVICE_RMC);
+ SVCSTR(WMI_SERVICE_MHF_OFFLOAD);
+ SVCSTR(WMI_SERVICE_COEX_SAR);
+ SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE);
+ SVCSTR(WMI_SERVICE_NAN);
+ SVCSTR(WMI_SERVICE_L1SS_STAT);
+ SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED);
+ SVCSTR(WMI_SERVICE_OBSS_SCAN);
+ SVCSTR(WMI_SERVICE_TDLS_OFFCHAN);
+ SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA);
+ SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA);
+ SVCSTR(WMI_SERVICE_IBSS_PWRSAVE);
+ SVCSTR(WMI_SERVICE_LPASS);
+ SVCSTR(WMI_SERVICE_EXTSCAN);
+ SVCSTR(WMI_SERVICE_D0WOW);
+ SVCSTR(WMI_SERVICE_HSOFFLOAD);
+ SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD);
+ SVCSTR(WMI_SERVICE_RX_FULL_REORDER);
+ SVCSTR(WMI_SERVICE_DHCP_OFFLOAD);
+ SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT);
+ SVCSTR(WMI_SERVICE_MDNS_OFFLOAD);
+ SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD);
+ SVCSTR(WMI_SERVICE_ATF);
+ SVCSTR(WMI_SERVICE_COEX_GPIO);
+ SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA);
+ SVCSTR(WMI_SERVICE_TT);
+ SVCSTR(WMI_SERVICE_PEER_CACHING);
+ SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF);
+ SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF);
+ SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64);
+ SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT);
+ SVCSTR(WMI_SERVICE_MESH_11S);
+ SVCSTR(WMI_SERVICE_MESH_NON_11S);
+ SVCSTR(WMI_SERVICE_PEER_STATS);
+ SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT);
+ SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT);
+ SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY);
+ SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL);
+ SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC);
+ SVCSTR(WMI_SERVICE_VDEV_RX_FILTER);
+ SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION);
+ SVCSTR(WMI_SERVICE_DBGLOG_WARN2);
+ SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE);
+ SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT);
+ SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT);
+ SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT);
+ SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT);
+ SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE);
+ SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY);
+ default:
+ return NULL;
+ }
+
+#undef SVCSTR
+}
+
+#define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
+ ((svc_id) < (len) && \
+ __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \
+ BIT((svc_id) % (sizeof(u32))))
+
+/* This extension is required to accommodate new services, current limit
+ * for wmi_services is 64 as target is using only 4-bits of each 32-bit
+ * wmi_service word. Extending this to make use of remaining unused bits
+ * for new services.
+ */
+#define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
+ ((svc_id) >= (len) && \
+ __le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \
+ BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4))
+
+#define SVCMAP(x, y, len) \
+ do { \
+ if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \
+ (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \
+ __set_bit(y, out); \
+ } while (0)
+
+static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out,
+ size_t len)
+{
+ SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD,
+ WMI_SERVICE_BEACON_OFFLOAD, len);
+ SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD,
+ WMI_SERVICE_SCAN_OFFLOAD, len);
+ SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD,
+ WMI_SERVICE_ROAM_OFFLOAD, len);
+ SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
+ WMI_SERVICE_BCN_MISS_OFFLOAD, len);
+ SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE,
+ WMI_SERVICE_STA_PWRSAVE, len);
+ SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
+ WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
+ SVCMAP(WMI_10X_SERVICE_AP_UAPSD,
+ WMI_SERVICE_AP_UAPSD, len);
+ SVCMAP(WMI_10X_SERVICE_AP_DFS,
+ WMI_SERVICE_AP_DFS, len);
+ SVCMAP(WMI_10X_SERVICE_11AC,
+ WMI_SERVICE_11AC, len);
+ SVCMAP(WMI_10X_SERVICE_BLOCKACK,
+ WMI_SERVICE_BLOCKACK, len);
+ SVCMAP(WMI_10X_SERVICE_PHYERR,
+ WMI_SERVICE_PHYERR, len);
+ SVCMAP(WMI_10X_SERVICE_BCN_FILTER,
+ WMI_SERVICE_BCN_FILTER, len);
+ SVCMAP(WMI_10X_SERVICE_RTT,
+ WMI_SERVICE_RTT, len);
+ SVCMAP(WMI_10X_SERVICE_RATECTRL,
+ WMI_SERVICE_RATECTRL, len);
+ SVCMAP(WMI_10X_SERVICE_WOW,
+ WMI_SERVICE_WOW, len);
+ SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE,
+ WMI_SERVICE_RATECTRL_CACHE, len);
+ SVCMAP(WMI_10X_SERVICE_IRAM_TIDS,
+ WMI_SERVICE_IRAM_TIDS, len);
+ SVCMAP(WMI_10X_SERVICE_BURST,
+ WMI_SERVICE_BURST, len);
+ SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
+ WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
+ SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG,
+ WMI_SERVICE_FORCE_FW_HANG, len);
+ SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
+ WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
+ SVCMAP(WMI_10X_SERVICE_ATF,
+ WMI_SERVICE_ATF, len);
+ SVCMAP(WMI_10X_SERVICE_COEX_GPIO,
+ WMI_SERVICE_COEX_GPIO, len);
+ SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
+ WMI_SERVICE_AUX_SPECTRAL_INTF, len);
+ SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
+ WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
+ SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
+ WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
+ SVCMAP(WMI_10X_SERVICE_MESH,
+ WMI_SERVICE_MESH_11S, len);
+ SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
+ WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
+ SVCMAP(WMI_10X_SERVICE_PEER_STATS,
+ WMI_SERVICE_PEER_STATS, len);
+}
+
+static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out,
+ size_t len)
+{
+ SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD,
+ WMI_SERVICE_BEACON_OFFLOAD, len);
+ SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD,
+ WMI_SERVICE_SCAN_OFFLOAD, len);
+ SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD,
+ WMI_SERVICE_ROAM_OFFLOAD, len);
+ SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
+ WMI_SERVICE_BCN_MISS_OFFLOAD, len);
+ SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE,
+ WMI_SERVICE_STA_PWRSAVE, len);
+ SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
+ WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
+ SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD,
+ WMI_SERVICE_AP_UAPSD, len);
+ SVCMAP(WMI_MAIN_SERVICE_AP_DFS,
+ WMI_SERVICE_AP_DFS, len);
+ SVCMAP(WMI_MAIN_SERVICE_11AC,
+ WMI_SERVICE_11AC, len);
+ SVCMAP(WMI_MAIN_SERVICE_BLOCKACK,
+ WMI_SERVICE_BLOCKACK, len);
+ SVCMAP(WMI_MAIN_SERVICE_PHYERR,
+ WMI_SERVICE_PHYERR, len);
+ SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER,
+ WMI_SERVICE_BCN_FILTER, len);
+ SVCMAP(WMI_MAIN_SERVICE_RTT,
+ WMI_SERVICE_RTT, len);
+ SVCMAP(WMI_MAIN_SERVICE_RATECTRL,
+ WMI_SERVICE_RATECTRL, len);
+ SVCMAP(WMI_MAIN_SERVICE_WOW,
+ WMI_SERVICE_WOW, len);
+ SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE,
+ WMI_SERVICE_RATECTRL_CACHE, len);
+ SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS,
+ WMI_SERVICE_IRAM_TIDS, len);
+ SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
+ WMI_SERVICE_ARPNS_OFFLOAD, len);
+ SVCMAP(WMI_MAIN_SERVICE_NLO,
+ WMI_SERVICE_NLO, len);
+ SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD,
+ WMI_SERVICE_GTK_OFFLOAD, len);
+ SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH,
+ WMI_SERVICE_SCAN_SCH, len);
+ SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD,
+ WMI_SERVICE_CSA_OFFLOAD, len);
+ SVCMAP(WMI_MAIN_SERVICE_CHATTER,
+ WMI_SERVICE_CHATTER, len);
+ SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID,
+ WMI_SERVICE_COEX_FREQAVOID, len);
+ SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
+ WMI_SERVICE_PACKET_POWER_SAVE, len);
+ SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG,
+ WMI_SERVICE_FORCE_FW_HANG, len);
+ SVCMAP(WMI_MAIN_SERVICE_GPIO,
+ WMI_SERVICE_GPIO, len);
+ SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
+ WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len);
+ SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
+ WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
+ SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
+ WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
+ SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
+ WMI_SERVICE_STA_KEEP_ALIVE, len);
+ SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP,
+ WMI_SERVICE_TX_ENCAP, len);
+}
+
+static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
+ size_t len)
+{
+ SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD,
+ WMI_SERVICE_BEACON_OFFLOAD, len);
+ SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD,
+ WMI_SERVICE_SCAN_OFFLOAD, len);
+ SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD,
+ WMI_SERVICE_ROAM_OFFLOAD, len);
+ SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
+ WMI_SERVICE_BCN_MISS_OFFLOAD, len);
+ SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE,
+ WMI_SERVICE_STA_PWRSAVE, len);
+ SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
+ WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
+ SVCMAP(WMI_10_4_SERVICE_AP_UAPSD,
+ WMI_SERVICE_AP_UAPSD, len);
+ SVCMAP(WMI_10_4_SERVICE_AP_DFS,
+ WMI_SERVICE_AP_DFS, len);
+ SVCMAP(WMI_10_4_SERVICE_11AC,
+ WMI_SERVICE_11AC, len);
+ SVCMAP(WMI_10_4_SERVICE_BLOCKACK,
+ WMI_SERVICE_BLOCKACK, len);
+ SVCMAP(WMI_10_4_SERVICE_PHYERR,
+ WMI_SERVICE_PHYERR, len);
+ SVCMAP(WMI_10_4_SERVICE_BCN_FILTER,
+ WMI_SERVICE_BCN_FILTER, len);
+ SVCMAP(WMI_10_4_SERVICE_RTT,
+ WMI_SERVICE_RTT, len);
+ SVCMAP(WMI_10_4_SERVICE_RATECTRL,
+ WMI_SERVICE_RATECTRL, len);
+ SVCMAP(WMI_10_4_SERVICE_WOW,
+ WMI_SERVICE_WOW, len);
+ SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE,
+ WMI_SERVICE_RATECTRL_CACHE, len);
+ SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS,
+ WMI_SERVICE_IRAM_TIDS, len);
+ SVCMAP(WMI_10_4_SERVICE_BURST,
+ WMI_SERVICE_BURST, len);
+ SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
+ WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
+ SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD,
+ WMI_SERVICE_GTK_OFFLOAD, len);
+ SVCMAP(WMI_10_4_SERVICE_SCAN_SCH,
+ WMI_SERVICE_SCAN_SCH, len);
+ SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD,
+ WMI_SERVICE_CSA_OFFLOAD, len);
+ SVCMAP(WMI_10_4_SERVICE_CHATTER,
+ WMI_SERVICE_CHATTER, len);
+ SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID,
+ WMI_SERVICE_COEX_FREQAVOID, len);
+ SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE,
+ WMI_SERVICE_PACKET_POWER_SAVE, len);
+ SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG,
+ WMI_SERVICE_FORCE_FW_HANG, len);
+ SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
+ WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
+ SVCMAP(WMI_10_4_SERVICE_GPIO,
+ WMI_SERVICE_GPIO, len);
+ SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
+ WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
+ SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
+ WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
+ SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE,
+ WMI_SERVICE_STA_KEEP_ALIVE, len);
+ SVCMAP(WMI_10_4_SERVICE_TX_ENCAP,
+ WMI_SERVICE_TX_ENCAP, len);
+ SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
+ WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len);
+ SVCMAP(WMI_10_4_SERVICE_EARLY_RX,
+ WMI_SERVICE_EARLY_RX, len);
+ SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
+ WMI_SERVICE_ENHANCED_PROXY_STA, len);
+ SVCMAP(WMI_10_4_SERVICE_TT,
+ WMI_SERVICE_TT, len);
+ SVCMAP(WMI_10_4_SERVICE_ATF,
+ WMI_SERVICE_ATF, len);
+ SVCMAP(WMI_10_4_SERVICE_PEER_CACHING,
+ WMI_SERVICE_PEER_CACHING, len);
+ SVCMAP(WMI_10_4_SERVICE_COEX_GPIO,
+ WMI_SERVICE_COEX_GPIO, len);
+ SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
+ WMI_SERVICE_AUX_SPECTRAL_INTF, len);
+ SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
+ WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
+ SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
+ WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
+ SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
+ WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
+ SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S,
+ WMI_SERVICE_MESH_NON_11S, len);
+ SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
+ WMI_SERVICE_RESTRT_CHNL_SUPPORT, len);
+ SVCMAP(WMI_10_4_SERVICE_PEER_STATS,
+ WMI_SERVICE_PEER_STATS, len);
+ SVCMAP(WMI_10_4_SERVICE_MESH_11S,
+ WMI_SERVICE_MESH_11S, len);
+ SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
+ WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len);
+ SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
+ WMI_SERVICE_TX_MODE_PUSH_ONLY, len);
+ SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
+ WMI_SERVICE_TX_MODE_PUSH_PULL, len);
+ SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
+ WMI_SERVICE_TX_MODE_DYNAMIC, len);
+ SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER,
+ WMI_SERVICE_VDEV_RX_FILTER, len);
+ SVCMAP(WMI_10_4_SERVICE_BTCOEX,
+ WMI_SERVICE_BTCOEX, len);
+ SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION,
+ WMI_SERVICE_CHECK_CAL_VERSION, len);
+ SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2,
+ WMI_SERVICE_DBGLOG_WARN2, len);
+ SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
+ WMI_SERVICE_BTCOEX_DUTY_CYCLE, len);
+ SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
+ WMI_SERVICE_4_WIRE_COEX_SUPPORT, len);
+ SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
+ WMI_SERVICE_EXTENDED_NSS_SUPPORT, len);
+ SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
+ WMI_SERVICE_PROG_GPIO_BAND_SELECT, len);
+ SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
+ WMI_SERVICE_SMART_LOGGING_SUPPORT, len);
+ SVCMAP(WMI_10_4_SERVICE_TDLS,
+ WMI_SERVICE_TDLS, len);
+ SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN,
+ WMI_SERVICE_TDLS_OFFCHAN, len);
+ SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
+ WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len);
+ SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
+ WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len);
+ SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
+ WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len);
+ SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
+ WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len);
+}
+
+#undef SVCMAP
+
+/* 2 word representation of MAC addr */
+struct wmi_mac_addr {
+ union {
+ u8 addr[6];
+ struct {
+ u32 word0;
+ u32 word1;
+ } __packed;
+ } __packed;
+} __packed;
+
+struct wmi_cmd_map {
+ u32 init_cmdid;
+ u32 start_scan_cmdid;
+ u32 stop_scan_cmdid;
+ u32 scan_chan_list_cmdid;
+ u32 scan_sch_prio_tbl_cmdid;
+ u32 pdev_set_regdomain_cmdid;
+ u32 pdev_set_channel_cmdid;
+ u32 pdev_set_param_cmdid;
+ u32 pdev_pktlog_enable_cmdid;
+ u32 pdev_pktlog_disable_cmdid;
+ u32 pdev_set_wmm_params_cmdid;
+ u32 pdev_set_ht_cap_ie_cmdid;
+ u32 pdev_set_vht_cap_ie_cmdid;
+ u32 pdev_set_dscp_tid_map_cmdid;
+ u32 pdev_set_quiet_mode_cmdid;
+ u32 pdev_green_ap_ps_enable_cmdid;
+ u32 pdev_get_tpc_config_cmdid;
+ u32 pdev_set_base_macaddr_cmdid;
+ u32 vdev_create_cmdid;
+ u32 vdev_delete_cmdid;
+ u32 vdev_start_request_cmdid;
+ u32 vdev_restart_request_cmdid;
+ u32 vdev_up_cmdid;
+ u32 vdev_stop_cmdid;
+ u32 vdev_down_cmdid;
+ u32 vdev_set_param_cmdid;
+ u32 vdev_install_key_cmdid;
+ u32 peer_create_cmdid;
+ u32 peer_delete_cmdid;
+ u32 peer_flush_tids_cmdid;
+ u32 peer_set_param_cmdid;
+ u32 peer_assoc_cmdid;
+ u32 peer_add_wds_entry_cmdid;
+ u32 peer_remove_wds_entry_cmdid;
+ u32 peer_mcast_group_cmdid;
+ u32 bcn_tx_cmdid;
+ u32 pdev_send_bcn_cmdid;
+ u32 bcn_tmpl_cmdid;
+ u32 bcn_filter_rx_cmdid;
+ u32 prb_req_filter_rx_cmdid;
+ u32 mgmt_tx_cmdid;
+ u32 prb_tmpl_cmdid;
+ u32 addba_clear_resp_cmdid;
+ u32 addba_send_cmdid;
+ u32 addba_status_cmdid;
+ u32 delba_send_cmdid;
+ u32 addba_set_resp_cmdid;
+ u32 send_singleamsdu_cmdid;
+ u32 sta_powersave_mode_cmdid;
+ u32 sta_powersave_param_cmdid;
+ u32 sta_mimo_ps_mode_cmdid;
+ u32 pdev_dfs_enable_cmdid;
+ u32 pdev_dfs_disable_cmdid;
+ u32 roam_scan_mode;
+ u32 roam_scan_rssi_threshold;
+ u32 roam_scan_period;
+ u32 roam_scan_rssi_change_threshold;
+ u32 roam_ap_profile;
+ u32 ofl_scan_add_ap_profile;
+ u32 ofl_scan_remove_ap_profile;
+ u32 ofl_scan_period;
+ u32 p2p_dev_set_device_info;
+ u32 p2p_dev_set_discoverability;
+ u32 p2p_go_set_beacon_ie;
+ u32 p2p_go_set_probe_resp_ie;
+ u32 p2p_set_vendor_ie_data_cmdid;
+ u32 ap_ps_peer_param_cmdid;
+ u32 ap_ps_peer_uapsd_coex_cmdid;
+ u32 peer_rate_retry_sched_cmdid;
+ u32 wlan_profile_trigger_cmdid;
+ u32 wlan_profile_set_hist_intvl_cmdid;
+ u32 wlan_profile_get_profile_data_cmdid;
+ u32 wlan_profile_enable_profile_id_cmdid;
+ u32 wlan_profile_list_profile_id_cmdid;
+ u32 pdev_suspend_cmdid;
+ u32 pdev_resume_cmdid;
+ u32 add_bcn_filter_cmdid;
+ u32 rmv_bcn_filter_cmdid;
+ u32 wow_add_wake_pattern_cmdid;
+ u32 wow_del_wake_pattern_cmdid;
+ u32 wow_enable_disable_wake_event_cmdid;
+ u32 wow_enable_cmdid;
+ u32 wow_hostwakeup_from_sleep_cmdid;
+ u32 rtt_measreq_cmdid;
+ u32 rtt_tsf_cmdid;
+ u32 vdev_spectral_scan_configure_cmdid;
+ u32 vdev_spectral_scan_enable_cmdid;
+ u32 request_stats_cmdid;
+ u32 set_arp_ns_offload_cmdid;
+ u32 network_list_offload_config_cmdid;
+ u32 gtk_offload_cmdid;
+ u32 csa_offload_enable_cmdid;
+ u32 csa_offload_chanswitch_cmdid;
+ u32 chatter_set_mode_cmdid;
+ u32 peer_tid_addba_cmdid;
+ u32 peer_tid_delba_cmdid;
+ u32 sta_dtim_ps_method_cmdid;
+ u32 sta_uapsd_auto_trig_cmdid;
+ u32 sta_keepalive_cmd;
+ u32 echo_cmdid;
+ u32 pdev_utf_cmdid;
+ u32 dbglog_cfg_cmdid;
+ u32 pdev_qvit_cmdid;
+ u32 pdev_ftm_intg_cmdid;
+ u32 vdev_set_keepalive_cmdid;
+ u32 vdev_get_keepalive_cmdid;
+ u32 force_fw_hang_cmdid;
+ u32 gpio_config_cmdid;
+ u32 gpio_output_cmdid;
+ u32 pdev_get_temperature_cmdid;
+ u32 vdev_set_wmm_params_cmdid;
+ u32 tdls_set_state_cmdid;
+ u32 tdls_peer_update_cmdid;
+ u32 adaptive_qcs_cmdid;
+ u32 scan_update_request_cmdid;
+ u32 vdev_standby_response_cmdid;
+ u32 vdev_resume_response_cmdid;
+ u32 wlan_peer_caching_add_peer_cmdid;
+ u32 wlan_peer_caching_evict_peer_cmdid;
+ u32 wlan_peer_caching_restore_peer_cmdid;
+ u32 wlan_peer_caching_print_all_peers_info_cmdid;
+ u32 peer_update_wds_entry_cmdid;
+ u32 peer_add_proxy_sta_entry_cmdid;
+ u32 rtt_keepalive_cmdid;
+ u32 oem_req_cmdid;
+ u32 nan_cmdid;
+ u32 vdev_ratemask_cmdid;
+ u32 qboost_cfg_cmdid;
+ u32 pdev_smart_ant_enable_cmdid;
+ u32 pdev_smart_ant_set_rx_antenna_cmdid;
+ u32 peer_smart_ant_set_tx_antenna_cmdid;
+ u32 peer_smart_ant_set_train_info_cmdid;
+ u32 peer_smart_ant_set_node_config_ops_cmdid;
+ u32 pdev_set_antenna_switch_table_cmdid;
+ u32 pdev_set_ctl_table_cmdid;
+ u32 pdev_set_mimogain_table_cmdid;
+ u32 pdev_ratepwr_table_cmdid;
+ u32 pdev_ratepwr_chainmsk_table_cmdid;
+ u32 pdev_fips_cmdid;
+ u32 tt_set_conf_cmdid;
+ u32 fwtest_cmdid;
+ u32 vdev_atf_request_cmdid;
+ u32 peer_atf_request_cmdid;
+ u32 pdev_get_ani_cck_config_cmdid;
+ u32 pdev_get_ani_ofdm_config_cmdid;
+ u32 pdev_reserve_ast_entry_cmdid;
+ u32 pdev_get_nfcal_power_cmdid;
+ u32 pdev_get_tpc_cmdid;
+ u32 pdev_get_ast_info_cmdid;
+ u32 vdev_set_dscp_tid_map_cmdid;
+ u32 pdev_get_info_cmdid;
+ u32 vdev_get_info_cmdid;
+ u32 vdev_filter_neighbor_rx_packets_cmdid;
+ u32 mu_cal_start_cmdid;
+ u32 set_cca_params_cmdid;
+ u32 pdev_bss_chan_info_request_cmdid;
+ u32 pdev_enable_adaptive_cca_cmdid;
+ u32 ext_resource_cfg_cmdid;
+ u32 vdev_set_ie_cmdid;
+ u32 set_lteu_config_cmdid;
+ u32 atf_ssid_grouping_request_cmdid;
+ u32 peer_atf_ext_request_cmdid;
+ u32 set_periodic_channel_stats_cfg_cmdid;
+ u32 peer_bwf_request_cmdid;
+ u32 btcoex_cfg_cmdid;
+ u32 peer_tx_mu_txmit_count_cmdid;
+ u32 peer_tx_mu_txmit_rstcnt_cmdid;
+ u32 peer_gid_userpos_list_cmdid;
+ u32 pdev_check_cal_version_cmdid;
+ u32 coex_version_cfg_cmid;
+ u32 pdev_get_rx_filter_cmdid;
+ u32 pdev_extended_nss_cfg_cmdid;
+ u32 vdev_set_scan_nac_rssi_cmdid;
+ u32 prog_gpio_band_select_cmdid;
+ u32 config_smart_logging_cmdid;
+ u32 debug_fatal_condition_cmdid;
+ u32 get_tsf_timer_cmdid;
+ u32 pdev_get_tpc_table_cmdid;
+ u32 vdev_sifs_trigger_time_cmdid;
+ u32 pdev_wds_entry_list_cmdid;
+ u32 tdls_set_offchan_mode_cmdid;
+};
+
+/*
+ * wmi command groups.
+ */
+enum wmi_cmd_group {
+ /* 0 to 2 are reserved */
+ WMI_GRP_START = 0x3,
+ WMI_GRP_SCAN = WMI_GRP_START,
+ WMI_GRP_PDEV,
+ WMI_GRP_VDEV,
+ WMI_GRP_PEER,
+ WMI_GRP_MGMT,
+ WMI_GRP_BA_NEG,
+ WMI_GRP_STA_PS,
+ WMI_GRP_DFS,
+ WMI_GRP_ROAM,
+ WMI_GRP_OFL_SCAN,
+ WMI_GRP_P2P,
+ WMI_GRP_AP_PS,
+ WMI_GRP_RATE_CTRL,
+ WMI_GRP_PROFILE,
+ WMI_GRP_SUSPEND,
+ WMI_GRP_BCN_FILTER,
+ WMI_GRP_WOW,
+ WMI_GRP_RTT,
+ WMI_GRP_SPECTRAL,
+ WMI_GRP_STATS,
+ WMI_GRP_ARP_NS_OFL,
+ WMI_GRP_NLO_OFL,
+ WMI_GRP_GTK_OFL,
+ WMI_GRP_CSA_OFL,
+ WMI_GRP_CHATTER,
+ WMI_GRP_TID_ADDBA,
+ WMI_GRP_MISC,
+ WMI_GRP_GPIO,
+};
+
+#define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1)
+#define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
+
+#define WMI_CMD_UNSUPPORTED 0
+
+/* Command IDs and command events for MAIN FW. */
+enum wmi_cmd_id {
+ WMI_INIT_CMDID = 0x1,
+
+ /* Scan specific commands */
+ WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN),
+ WMI_STOP_SCAN_CMDID,
+ WMI_SCAN_CHAN_LIST_CMDID,
+ WMI_SCAN_SCH_PRIO_TBL_CMDID,
+
+ /* PDEV (physical device) specific commands */
+ WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV),
+ WMI_PDEV_SET_CHANNEL_CMDID,
+ WMI_PDEV_SET_PARAM_CMDID,
+ WMI_PDEV_PKTLOG_ENABLE_CMDID,
+ WMI_PDEV_PKTLOG_DISABLE_CMDID,
+ WMI_PDEV_SET_WMM_PARAMS_CMDID,
+ WMI_PDEV_SET_HT_CAP_IE_CMDID,
+ WMI_PDEV_SET_VHT_CAP_IE_CMDID,
+ WMI_PDEV_SET_DSCP_TID_MAP_CMDID,
+ WMI_PDEV_SET_QUIET_MODE_CMDID,
+ WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID,
+ WMI_PDEV_GET_TPC_CONFIG_CMDID,
+ WMI_PDEV_SET_BASE_MACADDR_CMDID,
+
+ /* VDEV (virtual device) specific commands */
+ WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV),
+ WMI_VDEV_DELETE_CMDID,
+ WMI_VDEV_START_REQUEST_CMDID,
+ WMI_VDEV_RESTART_REQUEST_CMDID,
+ WMI_VDEV_UP_CMDID,
+ WMI_VDEV_STOP_CMDID,
+ WMI_VDEV_DOWN_CMDID,
+ WMI_VDEV_SET_PARAM_CMDID,
+ WMI_VDEV_INSTALL_KEY_CMDID,
+
+ /* peer specific commands */
+ WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER),
+ WMI_PEER_DELETE_CMDID,
+ WMI_PEER_FLUSH_TIDS_CMDID,
+ WMI_PEER_SET_PARAM_CMDID,
+ WMI_PEER_ASSOC_CMDID,
+ WMI_PEER_ADD_WDS_ENTRY_CMDID,
+ WMI_PEER_REMOVE_WDS_ENTRY_CMDID,
+ WMI_PEER_MCAST_GROUP_CMDID,
+
+ /* beacon/management specific commands */
+ WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT),
+ WMI_PDEV_SEND_BCN_CMDID,
+ WMI_BCN_TMPL_CMDID,
+ WMI_BCN_FILTER_RX_CMDID,
+ WMI_PRB_REQ_FILTER_RX_CMDID,
+ WMI_MGMT_TX_CMDID,
+ WMI_PRB_TMPL_CMDID,
+
+ /* commands to directly control BA negotiation directly from host. */
+ WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG),
+ WMI_ADDBA_SEND_CMDID,
+ WMI_ADDBA_STATUS_CMDID,
+ WMI_DELBA_SEND_CMDID,
+ WMI_ADDBA_SET_RESP_CMDID,
+ WMI_SEND_SINGLEAMSDU_CMDID,
+
+ /* Station power save specific config */
+ WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS),
+ WMI_STA_POWERSAVE_PARAM_CMDID,
+ WMI_STA_MIMO_PS_MODE_CMDID,
+
+ /** DFS-specific commands */
+ WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS),
+ WMI_PDEV_DFS_DISABLE_CMDID,
+
+ /* Roaming specific commands */
+ WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM),
+ WMI_ROAM_SCAN_RSSI_THRESHOLD,
+ WMI_ROAM_SCAN_PERIOD,
+ WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
+ WMI_ROAM_AP_PROFILE,
+
+ /* offload scan specific commands */
+ WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN),
+ WMI_OFL_SCAN_REMOVE_AP_PROFILE,
+ WMI_OFL_SCAN_PERIOD,
+
+ /* P2P specific commands */
+ WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P),
+ WMI_P2P_DEV_SET_DISCOVERABILITY,
+ WMI_P2P_GO_SET_BEACON_IE,
+ WMI_P2P_GO_SET_PROBE_RESP_IE,
+ WMI_P2P_SET_VENDOR_IE_DATA_CMDID,
+
+ /* AP power save specific config */
+ WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS),
+ WMI_AP_PS_PEER_UAPSD_COEX_CMDID,
+
+ /* Rate-control specific commands */
+ WMI_PEER_RATE_RETRY_SCHED_CMDID =
+ WMI_CMD_GRP(WMI_GRP_RATE_CTRL),
+
+ /* WLAN Profiling commands. */
+ WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE),
+ WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
+ WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
+ WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
+ WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
+
+ /* Suspend resume command Ids */
+ WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND),
+ WMI_PDEV_RESUME_CMDID,
+
+ /* Beacon filter commands */
+ WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER),
+ WMI_RMV_BCN_FILTER_CMDID,
+
+ /* WOW Specific WMI commands*/
+ WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW),
+ WMI_WOW_DEL_WAKE_PATTERN_CMDID,
+ WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
+ WMI_WOW_ENABLE_CMDID,
+ WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
+
+ /* RTT measurement related cmd */
+ WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT),
+ WMI_RTT_TSF_CMDID,
+
+ /* spectral scan commands */
+ WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL),
+ WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
+
+ /* F/W stats */
+ WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS),
+
+ /* ARP OFFLOAD REQUEST*/
+ WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL),
+
+ /* NS offload confid*/
+ WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL),
+
+ /* GTK offload Specific WMI commands*/
+ WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL),
+
+ /* CSA offload Specific WMI commands*/
+ WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL),
+ WMI_CSA_OFFLOAD_CHANSWITCH_CMDID,
+
+ /* Chatter commands*/
+ WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER),
+
+ /* addba specific commands */
+ WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA),
+ WMI_PEER_TID_DELBA_CMDID,
+
+ /* set station mimo powersave method */
+ WMI_STA_DTIM_PS_METHOD_CMDID,
+ /* Configure the Station UAPSD AC Auto Trigger Parameters */
+ WMI_STA_UAPSD_AUTO_TRIG_CMDID,
+
+ /* STA Keep alive parameter configuration,
+ * Requires WMI_SERVICE_STA_KEEP_ALIVE
+ */
+ WMI_STA_KEEPALIVE_CMD,
+
+ /* misc command group */
+ WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC),
+ WMI_PDEV_UTF_CMDID,
+ WMI_DBGLOG_CFG_CMDID,
+ WMI_PDEV_QVIT_CMDID,
+ WMI_PDEV_FTM_INTG_CMDID,
+ WMI_VDEV_SET_KEEPALIVE_CMDID,
+ WMI_VDEV_GET_KEEPALIVE_CMDID,
+ WMI_FORCE_FW_HANG_CMDID,
+
+ /* GPIO Configuration */
+ WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO),
+ WMI_GPIO_OUTPUT_CMDID,
+};
+
+enum wmi_event_id {
+ WMI_SERVICE_READY_EVENTID = 0x1,
+ WMI_READY_EVENTID,
+
+ /* Scan specific events */
+ WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN),
+
+ /* PDEV specific events */
+ WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV),
+ WMI_CHAN_INFO_EVENTID,
+ WMI_PHYERR_EVENTID,
+
+ /* VDEV specific events */
+ WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV),
+ WMI_VDEV_STOPPED_EVENTID,
+ WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID,
+
+ /* peer specific events */
+ WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER),
+
+ /* beacon/mgmt specific events */
+ WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT),
+ WMI_HOST_SWBA_EVENTID,
+ WMI_TBTTOFFSET_UPDATE_EVENTID,
+
+ /* ADDBA Related WMI Events*/
+ WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG),
+ WMI_TX_ADDBA_COMPLETE_EVENTID,
+
+ /* Roam event to trigger roaming on host */
+ WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM),
+ WMI_PROFILE_MATCH,
+
+ /* WoW */
+ WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW),
+
+ /* RTT */
+ WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT),
+ WMI_TSF_MEASUREMENT_REPORT_EVENTID,
+ WMI_RTT_ERROR_REPORT_EVENTID,
+
+ /* GTK offload */
+ WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL),
+ WMI_GTK_REKEY_FAIL_EVENTID,
+
+ /* CSA IE received event */
+ WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL),
+
+ /* Misc events */
+ WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC),
+ WMI_PDEV_UTF_EVENTID,
+ WMI_DEBUG_MESG_EVENTID,
+ WMI_UPDATE_STATS_EVENTID,
+ WMI_DEBUG_PRINT_EVENTID,
+ WMI_DCS_INTERFERENCE_EVENTID,
+ WMI_PDEV_QVIT_EVENTID,
+ WMI_WLAN_PROFILE_DATA_EVENTID,
+ WMI_PDEV_FTM_INTG_EVENTID,
+ WMI_WLAN_FREQ_AVOID_EVENTID,
+ WMI_VDEV_GET_KEEPALIVE_EVENTID,
+
+ /* GPIO Event */
+ WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
+};
+
+/* Command IDs and command events for 10.X firmware */
+enum wmi_10x_cmd_id {
+ WMI_10X_START_CMDID = 0x9000,
+ WMI_10X_END_CMDID = 0x9FFF,
+
+ /* initialize the wlan sub system */
+ WMI_10X_INIT_CMDID,
+
+ /* Scan specific commands */
+
+ WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID,
+ WMI_10X_STOP_SCAN_CMDID,
+ WMI_10X_SCAN_CHAN_LIST_CMDID,
+ WMI_10X_ECHO_CMDID,
+
+ /* PDEV(physical device) specific commands */
+ WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
+ WMI_10X_PDEV_SET_CHANNEL_CMDID,
+ WMI_10X_PDEV_SET_PARAM_CMDID,
+ WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,
+ WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,
+ WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,
+ WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,
+ WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,
+ WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,
+ WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,
+ WMI_10X_PDEV_SET_QUIET_MODE_CMDID,
+ WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,
+ WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,
+
+ /* VDEV(virtual device) specific commands */
+ WMI_10X_VDEV_CREATE_CMDID,
+ WMI_10X_VDEV_DELETE_CMDID,
+ WMI_10X_VDEV_START_REQUEST_CMDID,
+ WMI_10X_VDEV_RESTART_REQUEST_CMDID,
+ WMI_10X_VDEV_UP_CMDID,
+ WMI_10X_VDEV_STOP_CMDID,
+ WMI_10X_VDEV_DOWN_CMDID,
+ WMI_10X_VDEV_STANDBY_RESPONSE_CMDID,
+ WMI_10X_VDEV_RESUME_RESPONSE_CMDID,
+ WMI_10X_VDEV_SET_PARAM_CMDID,
+ WMI_10X_VDEV_INSTALL_KEY_CMDID,
+
+ /* peer specific commands */
+ WMI_10X_PEER_CREATE_CMDID,
+ WMI_10X_PEER_DELETE_CMDID,
+ WMI_10X_PEER_FLUSH_TIDS_CMDID,
+ WMI_10X_PEER_SET_PARAM_CMDID,
+ WMI_10X_PEER_ASSOC_CMDID,
+ WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,
+ WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,
+ WMI_10X_PEER_MCAST_GROUP_CMDID,
+
+ /* beacon/management specific commands */
+
+ WMI_10X_BCN_TX_CMDID,
+ WMI_10X_BCN_PRB_TMPL_CMDID,
+ WMI_10X_BCN_FILTER_RX_CMDID,
+ WMI_10X_PRB_REQ_FILTER_RX_CMDID,
+ WMI_10X_MGMT_TX_CMDID,
+
+ /* commands to directly control ba negotiation directly from host. */
+ WMI_10X_ADDBA_CLEAR_RESP_CMDID,
+ WMI_10X_ADDBA_SEND_CMDID,
+ WMI_10X_ADDBA_STATUS_CMDID,
+ WMI_10X_DELBA_SEND_CMDID,
+ WMI_10X_ADDBA_SET_RESP_CMDID,
+ WMI_10X_SEND_SINGLEAMSDU_CMDID,
+
+ /* Station power save specific config */
+ WMI_10X_STA_POWERSAVE_MODE_CMDID,
+ WMI_10X_STA_POWERSAVE_PARAM_CMDID,
+ WMI_10X_STA_MIMO_PS_MODE_CMDID,
+
+ /* set debug log config */
+ WMI_10X_DBGLOG_CFG_CMDID,
+
+ /* DFS-specific commands */
+ WMI_10X_PDEV_DFS_ENABLE_CMDID,
+ WMI_10X_PDEV_DFS_DISABLE_CMDID,
+
+ /* QVIT specific command id */
+ WMI_10X_PDEV_QVIT_CMDID,
+
+ /* Offload Scan and Roaming related commands */
+ WMI_10X_ROAM_SCAN_MODE,
+ WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,
+ WMI_10X_ROAM_SCAN_PERIOD,
+ WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
+ WMI_10X_ROAM_AP_PROFILE,
+ WMI_10X_OFL_SCAN_ADD_AP_PROFILE,
+ WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,
+ WMI_10X_OFL_SCAN_PERIOD,
+
+ /* P2P specific commands */
+ WMI_10X_P2P_DEV_SET_DEVICE_INFO,
+ WMI_10X_P2P_DEV_SET_DISCOVERABILITY,
+ WMI_10X_P2P_GO_SET_BEACON_IE,
+ WMI_10X_P2P_GO_SET_PROBE_RESP_IE,
+
+ /* AP power save specific config */
+ WMI_10X_AP_PS_PEER_PARAM_CMDID,
+ WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID,
+
+ /* Rate-control specific commands */
+ WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,
+
+ /* WLAN Profiling commands. */
+ WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
+ WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
+ WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
+ WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
+ WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
+
+ /* Suspend resume command Ids */
+ WMI_10X_PDEV_SUSPEND_CMDID,
+ WMI_10X_PDEV_RESUME_CMDID,
+
+ /* Beacon filter commands */
+ WMI_10X_ADD_BCN_FILTER_CMDID,
+ WMI_10X_RMV_BCN_FILTER_CMDID,
+
+ /* WOW Specific WMI commands*/
+ WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,
+ WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,
+ WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
+ WMI_10X_WOW_ENABLE_CMDID,
+ WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
+
+ /* RTT measurement related cmd */
+ WMI_10X_RTT_MEASREQ_CMDID,
+ WMI_10X_RTT_TSF_CMDID,
+
+ /* transmit beacon by value */
+ WMI_10X_PDEV_SEND_BCN_CMDID,
+
+ /* F/W stats */
+ WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
+ WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
+ WMI_10X_REQUEST_STATS_CMDID,
+
+ /* GPIO Configuration */
+ WMI_10X_GPIO_CONFIG_CMDID,
+ WMI_10X_GPIO_OUTPUT_CMDID,
+
+ WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1,
+};
+
+enum wmi_10x_event_id {
+ WMI_10X_SERVICE_READY_EVENTID = 0x8000,
+ WMI_10X_READY_EVENTID,
+ WMI_10X_START_EVENTID = 0x9000,
+ WMI_10X_END_EVENTID = 0x9FFF,
+
+ /* Scan specific events */
+ WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID,
+ WMI_10X_ECHO_EVENTID,
+ WMI_10X_DEBUG_MESG_EVENTID,
+ WMI_10X_UPDATE_STATS_EVENTID,
+
+ /* Instantaneous RSSI event */
+ WMI_10X_INST_RSSI_STATS_EVENTID,
+
+ /* VDEV specific events */
+ WMI_10X_VDEV_START_RESP_EVENTID,
+ WMI_10X_VDEV_STANDBY_REQ_EVENTID,
+ WMI_10X_VDEV_RESUME_REQ_EVENTID,
+ WMI_10X_VDEV_STOPPED_EVENTID,
+
+ /* peer specific events */
+ WMI_10X_PEER_STA_KICKOUT_EVENTID,
+
+ /* beacon/mgmt specific events */
+ WMI_10X_HOST_SWBA_EVENTID,
+ WMI_10X_TBTTOFFSET_UPDATE_EVENTID,
+ WMI_10X_MGMT_RX_EVENTID,
+
+ /* Channel stats event */
+ WMI_10X_CHAN_INFO_EVENTID,
+
+ /* PHY Error specific WMI event */
+ WMI_10X_PHYERR_EVENTID,
+
+ /* Roam event to trigger roaming on host */
+ WMI_10X_ROAM_EVENTID,
+
+ /* matching AP found from list of profiles */
+ WMI_10X_PROFILE_MATCH,
+
+ /* debug print message used for tracing FW code while debugging */
+ WMI_10X_DEBUG_PRINT_EVENTID,
+ /* VI spoecific event */
+ WMI_10X_PDEV_QVIT_EVENTID,
+ /* FW code profile data in response to profile request */
+ WMI_10X_WLAN_PROFILE_DATA_EVENTID,
+
+ /*RTT related event ID*/
+ WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID,
+ WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID,
+ WMI_10X_RTT_ERROR_REPORT_EVENTID,
+
+ WMI_10X_WOW_WAKEUP_HOST_EVENTID,
+ WMI_10X_DCS_INTERFERENCE_EVENTID,
+
+ /* TPC config for the current operating channel */
+ WMI_10X_PDEV_TPC_CONFIG_EVENTID,
+
+ WMI_10X_GPIO_INPUT_EVENTID,
+ WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1,
+};
+
+enum wmi_10_2_cmd_id {
+ WMI_10_2_START_CMDID = 0x9000,
+ WMI_10_2_END_CMDID = 0x9FFF,
+ WMI_10_2_INIT_CMDID,
+ WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID,
+ WMI_10_2_STOP_SCAN_CMDID,
+ WMI_10_2_SCAN_CHAN_LIST_CMDID,
+ WMI_10_2_ECHO_CMDID,
+ WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
+ WMI_10_2_PDEV_SET_CHANNEL_CMDID,
+ WMI_10_2_PDEV_SET_PARAM_CMDID,
+ WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID,
+ WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID,
+ WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID,
+ WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID,
+ WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID,
+ WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID,
+ WMI_10_2_PDEV_SET_QUIET_MODE_CMDID,
+ WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID,
+ WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID,
+ WMI_10_2_VDEV_CREATE_CMDID,
+ WMI_10_2_VDEV_DELETE_CMDID,
+ WMI_10_2_VDEV_START_REQUEST_CMDID,
+ WMI_10_2_VDEV_RESTART_REQUEST_CMDID,
+ WMI_10_2_VDEV_UP_CMDID,
+ WMI_10_2_VDEV_STOP_CMDID,
+ WMI_10_2_VDEV_DOWN_CMDID,
+ WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID,
+ WMI_10_2_VDEV_RESUME_RESPONSE_CMDID,
+ WMI_10_2_VDEV_SET_PARAM_CMDID,
+ WMI_10_2_VDEV_INSTALL_KEY_CMDID,
+ WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID,
+ WMI_10_2_PEER_CREATE_CMDID,
+ WMI_10_2_PEER_DELETE_CMDID,
+ WMI_10_2_PEER_FLUSH_TIDS_CMDID,
+ WMI_10_2_PEER_SET_PARAM_CMDID,
+ WMI_10_2_PEER_ASSOC_CMDID,
+ WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID,
+ WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID,
+ WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID,
+ WMI_10_2_PEER_MCAST_GROUP_CMDID,
+ WMI_10_2_BCN_TX_CMDID,
+ WMI_10_2_BCN_PRB_TMPL_CMDID,
+ WMI_10_2_BCN_FILTER_RX_CMDID,
+ WMI_10_2_PRB_REQ_FILTER_RX_CMDID,
+ WMI_10_2_MGMT_TX_CMDID,
+ WMI_10_2_ADDBA_CLEAR_RESP_CMDID,
+ WMI_10_2_ADDBA_SEND_CMDID,
+ WMI_10_2_ADDBA_STATUS_CMDID,
+ WMI_10_2_DELBA_SEND_CMDID,
+ WMI_10_2_ADDBA_SET_RESP_CMDID,
+ WMI_10_2_SEND_SINGLEAMSDU_CMDID,
+ WMI_10_2_STA_POWERSAVE_MODE_CMDID,
+ WMI_10_2_STA_POWERSAVE_PARAM_CMDID,
+ WMI_10_2_STA_MIMO_PS_MODE_CMDID,
+ WMI_10_2_DBGLOG_CFG_CMDID,
+ WMI_10_2_PDEV_DFS_ENABLE_CMDID,
+ WMI_10_2_PDEV_DFS_DISABLE_CMDID,
+ WMI_10_2_PDEV_QVIT_CMDID,
+ WMI_10_2_ROAM_SCAN_MODE,
+ WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD,
+ WMI_10_2_ROAM_SCAN_PERIOD,
+ WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
+ WMI_10_2_ROAM_AP_PROFILE,
+ WMI_10_2_OFL_SCAN_ADD_AP_PROFILE,
+ WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE,
+ WMI_10_2_OFL_SCAN_PERIOD,
+ WMI_10_2_P2P_DEV_SET_DEVICE_INFO,
+ WMI_10_2_P2P_DEV_SET_DISCOVERABILITY,
+ WMI_10_2_P2P_GO_SET_BEACON_IE,
+ WMI_10_2_P2P_GO_SET_PROBE_RESP_IE,
+ WMI_10_2_AP_PS_PEER_PARAM_CMDID,
+ WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID,
+ WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID,
+ WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID,
+ WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
+ WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
+ WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
+ WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
+ WMI_10_2_PDEV_SUSPEND_CMDID,
+ WMI_10_2_PDEV_RESUME_CMDID,
+ WMI_10_2_ADD_BCN_FILTER_CMDID,
+ WMI_10_2_RMV_BCN_FILTER_CMDID,
+ WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID,
+ WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID,
+ WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
+ WMI_10_2_WOW_ENABLE_CMDID,
+ WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
+ WMI_10_2_RTT_MEASREQ_CMDID,
+ WMI_10_2_RTT_TSF_CMDID,
+ WMI_10_2_RTT_KEEPALIVE_CMDID,
+ WMI_10_2_PDEV_SEND_BCN_CMDID,
+ WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
+ WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
+ WMI_10_2_REQUEST_STATS_CMDID,
+ WMI_10_2_GPIO_CONFIG_CMDID,
+ WMI_10_2_GPIO_OUTPUT_CMDID,
+ WMI_10_2_VDEV_RATEMASK_CMDID,
+ WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID,
+ WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
+ WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
+ WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
+ WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
+ WMI_10_2_FORCE_FW_HANG_CMDID,
+ WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
+ WMI_10_2_PDEV_SET_CTL_TABLE_CMDID,
+ WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID,
+ WMI_10_2_PDEV_RATEPWR_TABLE_CMDID,
+ WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
+ WMI_10_2_PDEV_GET_INFO,
+ WMI_10_2_VDEV_GET_INFO,
+ WMI_10_2_VDEV_ATF_REQUEST_CMDID,
+ WMI_10_2_PEER_ATF_REQUEST_CMDID,
+ WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
+ WMI_10_2_MU_CAL_START_CMDID,
+ WMI_10_2_SET_LTEU_CONFIG_CMDID,
+ WMI_10_2_SET_CCA_PARAMS,
+ WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
+ WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,
+};
+
+enum wmi_10_2_event_id {
+ WMI_10_2_SERVICE_READY_EVENTID = 0x8000,
+ WMI_10_2_READY_EVENTID,
+ WMI_10_2_DEBUG_MESG_EVENTID,
+ WMI_10_2_START_EVENTID = 0x9000,
+ WMI_10_2_END_EVENTID = 0x9FFF,
+ WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID,
+ WMI_10_2_ECHO_EVENTID,
+ WMI_10_2_UPDATE_STATS_EVENTID,
+ WMI_10_2_INST_RSSI_STATS_EVENTID,
+ WMI_10_2_VDEV_START_RESP_EVENTID,
+ WMI_10_2_VDEV_STANDBY_REQ_EVENTID,
+ WMI_10_2_VDEV_RESUME_REQ_EVENTID,
+ WMI_10_2_VDEV_STOPPED_EVENTID,
+ WMI_10_2_PEER_STA_KICKOUT_EVENTID,
+ WMI_10_2_HOST_SWBA_EVENTID,
+ WMI_10_2_TBTTOFFSET_UPDATE_EVENTID,
+ WMI_10_2_MGMT_RX_EVENTID,
+ WMI_10_2_CHAN_INFO_EVENTID,
+ WMI_10_2_PHYERR_EVENTID,
+ WMI_10_2_ROAM_EVENTID,
+ WMI_10_2_PROFILE_MATCH,
+ WMI_10_2_DEBUG_PRINT_EVENTID,
+ WMI_10_2_PDEV_QVIT_EVENTID,
+ WMI_10_2_WLAN_PROFILE_DATA_EVENTID,
+ WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID,
+ WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID,
+ WMI_10_2_RTT_ERROR_REPORT_EVENTID,
+ WMI_10_2_RTT_KEEPALIVE_EVENTID,
+ WMI_10_2_WOW_WAKEUP_HOST_EVENTID,
+ WMI_10_2_DCS_INTERFERENCE_EVENTID,
+ WMI_10_2_PDEV_TPC_CONFIG_EVENTID,
+ WMI_10_2_GPIO_INPUT_EVENTID,
+ WMI_10_2_PEER_RATECODE_LIST_EVENTID,
+ WMI_10_2_GENERIC_BUFFER_EVENTID,
+ WMI_10_2_MCAST_BUF_RELEASE_EVENTID,
+ WMI_10_2_MCAST_LIST_AGEOUT_EVENTID,
+ WMI_10_2_WDS_PEER_EVENTID,
+ WMI_10_2_PEER_STA_PS_STATECHG_EVENTID,
+ WMI_10_2_PDEV_TEMPERATURE_EVENTID,
+ WMI_10_2_MU_REPORT_EVENTID,
+ WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID,
+ WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1,
+};
+
+enum wmi_10_4_cmd_id {
+ WMI_10_4_START_CMDID = 0x9000,
+ WMI_10_4_END_CMDID = 0x9FFF,
+ WMI_10_4_INIT_CMDID,
+ WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID,
+ WMI_10_4_STOP_SCAN_CMDID,
+ WMI_10_4_SCAN_CHAN_LIST_CMDID,
+ WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID,
+ WMI_10_4_SCAN_UPDATE_REQUEST_CMDID,
+ WMI_10_4_ECHO_CMDID,
+ WMI_10_4_PDEV_SET_REGDOMAIN_CMDID,
+ WMI_10_4_PDEV_SET_CHANNEL_CMDID,
+ WMI_10_4_PDEV_SET_PARAM_CMDID,
+ WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID,
+ WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID,
+ WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID,
+ WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID,
+ WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID,
+ WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID,
+ WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID,
+ WMI_10_4_PDEV_SET_QUIET_MODE_CMDID,
+ WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID,
+ WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID,
+ WMI_10_4_VDEV_CREATE_CMDID,
+ WMI_10_4_VDEV_DELETE_CMDID,
+ WMI_10_4_VDEV_START_REQUEST_CMDID,
+ WMI_10_4_VDEV_RESTART_REQUEST_CMDID,
+ WMI_10_4_VDEV_UP_CMDID,
+ WMI_10_4_VDEV_STOP_CMDID,
+ WMI_10_4_VDEV_DOWN_CMDID,
+ WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID,
+ WMI_10_4_VDEV_RESUME_RESPONSE_CMDID,
+ WMI_10_4_VDEV_SET_PARAM_CMDID,
+ WMI_10_4_VDEV_INSTALL_KEY_CMDID,
+ WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID,
+ WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID,
+ WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID,
+ WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID,
+ WMI_10_4_PEER_CREATE_CMDID,
+ WMI_10_4_PEER_DELETE_CMDID,
+ WMI_10_4_PEER_FLUSH_TIDS_CMDID,
+ WMI_10_4_PEER_SET_PARAM_CMDID,
+ WMI_10_4_PEER_ASSOC_CMDID,
+ WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID,
+ WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID,
+ WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID,
+ WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID,
+ WMI_10_4_PEER_MCAST_GROUP_CMDID,
+ WMI_10_4_BCN_TX_CMDID,
+ WMI_10_4_PDEV_SEND_BCN_CMDID,
+ WMI_10_4_BCN_PRB_TMPL_CMDID,
+ WMI_10_4_BCN_FILTER_RX_CMDID,
+ WMI_10_4_PRB_REQ_FILTER_RX_CMDID,
+ WMI_10_4_MGMT_TX_CMDID,
+ WMI_10_4_PRB_TMPL_CMDID,
+ WMI_10_4_ADDBA_CLEAR_RESP_CMDID,
+ WMI_10_4_ADDBA_SEND_CMDID,
+ WMI_10_4_ADDBA_STATUS_CMDID,
+ WMI_10_4_DELBA_SEND_CMDID,
+ WMI_10_4_ADDBA_SET_RESP_CMDID,
+ WMI_10_4_SEND_SINGLEAMSDU_CMDID,
+ WMI_10_4_STA_POWERSAVE_MODE_CMDID,
+ WMI_10_4_STA_POWERSAVE_PARAM_CMDID,
+ WMI_10_4_STA_MIMO_PS_MODE_CMDID,
+ WMI_10_4_DBGLOG_CFG_CMDID,
+ WMI_10_4_PDEV_DFS_ENABLE_CMDID,
+ WMI_10_4_PDEV_DFS_DISABLE_CMDID,
+ WMI_10_4_PDEV_QVIT_CMDID,
+ WMI_10_4_ROAM_SCAN_MODE,
+ WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD,
+ WMI_10_4_ROAM_SCAN_PERIOD,
+ WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
+ WMI_10_4_ROAM_AP_PROFILE,
+ WMI_10_4_OFL_SCAN_ADD_AP_PROFILE,
+ WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE,
+ WMI_10_4_OFL_SCAN_PERIOD,
+ WMI_10_4_P2P_DEV_SET_DEVICE_INFO,
+ WMI_10_4_P2P_DEV_SET_DISCOVERABILITY,
+ WMI_10_4_P2P_GO_SET_BEACON_IE,
+ WMI_10_4_P2P_GO_SET_PROBE_RESP_IE,
+ WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID,
+ WMI_10_4_AP_PS_PEER_PARAM_CMDID,
+ WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID,
+ WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID,
+ WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID,
+ WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
+ WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
+ WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
+ WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
+ WMI_10_4_PDEV_SUSPEND_CMDID,
+ WMI_10_4_PDEV_RESUME_CMDID,
+ WMI_10_4_ADD_BCN_FILTER_CMDID,
+ WMI_10_4_RMV_BCN_FILTER_CMDID,
+ WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID,
+ WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID,
+ WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
+ WMI_10_4_WOW_ENABLE_CMDID,
+ WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
+ WMI_10_4_RTT_MEASREQ_CMDID,
+ WMI_10_4_RTT_TSF_CMDID,
+ WMI_10_4_RTT_KEEPALIVE_CMDID,
+ WMI_10_4_OEM_REQ_CMDID,
+ WMI_10_4_NAN_CMDID,
+ WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
+ WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
+ WMI_10_4_REQUEST_STATS_CMDID,
+ WMI_10_4_GPIO_CONFIG_CMDID,
+ WMI_10_4_GPIO_OUTPUT_CMDID,
+ WMI_10_4_VDEV_RATEMASK_CMDID,
+ WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID,
+ WMI_10_4_GTK_OFFLOAD_CMDID,
+ WMI_10_4_QBOOST_CFG_CMDID,
+ WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID,
+ WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID,
+ WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
+ WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
+ WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
+ WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
+ WMI_10_4_VDEV_SET_KEEPALIVE_CMDID,
+ WMI_10_4_VDEV_GET_KEEPALIVE_CMDID,
+ WMI_10_4_FORCE_FW_HANG_CMDID,
+ WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
+ WMI_10_4_PDEV_SET_CTL_TABLE_CMDID,
+ WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID,
+ WMI_10_4_PDEV_RATEPWR_TABLE_CMDID,
+ WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
+ WMI_10_4_PDEV_FIPS_CMDID,
+ WMI_10_4_TT_SET_CONF_CMDID,
+ WMI_10_4_FWTEST_CMDID,
+ WMI_10_4_VDEV_ATF_REQUEST_CMDID,
+ WMI_10_4_PEER_ATF_REQUEST_CMDID,
+ WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID,
+ WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID,
+ WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID,
+ WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID,
+ WMI_10_4_PDEV_GET_TPC_CMDID,
+ WMI_10_4_PDEV_GET_AST_INFO_CMDID,
+ WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID,
+ WMI_10_4_PDEV_GET_TEMPERATURE_CMDID,
+ WMI_10_4_PDEV_GET_INFO_CMDID,
+ WMI_10_4_VDEV_GET_INFO_CMDID,
+ WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID,
+ WMI_10_4_MU_CAL_START_CMDID,
+ WMI_10_4_SET_CCA_PARAMS_CMDID,
+ WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
+ WMI_10_4_EXT_RESOURCE_CFG_CMDID,
+ WMI_10_4_VDEV_SET_IE_CMDID,
+ WMI_10_4_SET_LTEU_CONFIG_CMDID,
+ WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID,
+ WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID,
+ WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG,
+ WMI_10_4_PEER_BWF_REQUEST_CMDID,
+ WMI_10_4_BTCOEX_CFG_CMDID,
+ WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID,
+ WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID,
+ WMI_10_4_PEER_GID_USERPOS_LIST_CMDID,
+ WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID,
+ WMI_10_4_COEX_VERSION_CFG_CMID,
+ WMI_10_4_PDEV_GET_RX_FILTER_CMDID,
+ WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID,
+ WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID,
+ WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID,
+ WMI_10_4_CONFIG_SMART_LOGGING_CMDID,
+ WMI_10_4_DEBUG_FATAL_CONDITION_CMDID,
+ WMI_10_4_GET_TSF_TIMER_CMDID,
+ WMI_10_4_PDEV_GET_TPC_TABLE_CMDID,
+ WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID,
+ WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID,
+ WMI_10_4_TDLS_SET_STATE_CMDID,
+ WMI_10_4_TDLS_PEER_UPDATE_CMDID,
+ WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID,
+ WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
+};
+
+enum wmi_10_4_event_id {
+ WMI_10_4_SERVICE_READY_EVENTID = 0x8000,
+ WMI_10_4_READY_EVENTID,
+ WMI_10_4_DEBUG_MESG_EVENTID,
+ WMI_10_4_START_EVENTID = 0x9000,
+ WMI_10_4_END_EVENTID = 0x9FFF,
+ WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID,
+ WMI_10_4_ECHO_EVENTID,
+ WMI_10_4_UPDATE_STATS_EVENTID,
+ WMI_10_4_INST_RSSI_STATS_EVENTID,
+ WMI_10_4_VDEV_START_RESP_EVENTID,
+ WMI_10_4_VDEV_STANDBY_REQ_EVENTID,
+ WMI_10_4_VDEV_RESUME_REQ_EVENTID,
+ WMI_10_4_VDEV_STOPPED_EVENTID,
+ WMI_10_4_PEER_STA_KICKOUT_EVENTID,
+ WMI_10_4_HOST_SWBA_EVENTID,
+ WMI_10_4_TBTTOFFSET_UPDATE_EVENTID,
+ WMI_10_4_MGMT_RX_EVENTID,
+ WMI_10_4_CHAN_INFO_EVENTID,
+ WMI_10_4_PHYERR_EVENTID,
+ WMI_10_4_ROAM_EVENTID,
+ WMI_10_4_PROFILE_MATCH,
+ WMI_10_4_DEBUG_PRINT_EVENTID,
+ WMI_10_4_PDEV_QVIT_EVENTID,
+ WMI_10_4_WLAN_PROFILE_DATA_EVENTID,
+ WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID,
+ WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID,
+ WMI_10_4_RTT_ERROR_REPORT_EVENTID,
+ WMI_10_4_RTT_KEEPALIVE_EVENTID,
+ WMI_10_4_OEM_CAPABILITY_EVENTID,
+ WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID,
+ WMI_10_4_OEM_ERROR_REPORT_EVENTID,
+ WMI_10_4_NAN_EVENTID,
+ WMI_10_4_WOW_WAKEUP_HOST_EVENTID,
+ WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID,
+ WMI_10_4_GTK_REKEY_FAIL_EVENTID,
+ WMI_10_4_DCS_INTERFERENCE_EVENTID,
+ WMI_10_4_PDEV_TPC_CONFIG_EVENTID,
+ WMI_10_4_CSA_HANDLING_EVENTID,
+ WMI_10_4_GPIO_INPUT_EVENTID,
+ WMI_10_4_PEER_RATECODE_LIST_EVENTID,
+ WMI_10_4_GENERIC_BUFFER_EVENTID,
+ WMI_10_4_MCAST_BUF_RELEASE_EVENTID,
+ WMI_10_4_MCAST_LIST_AGEOUT_EVENTID,
+ WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID,
+ WMI_10_4_WDS_PEER_EVENTID,
+ WMI_10_4_PEER_STA_PS_STATECHG_EVENTID,
+ WMI_10_4_PDEV_FIPS_EVENTID,
+ WMI_10_4_TT_STATS_EVENTID,
+ WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID,
+ WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID,
+ WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID,
+ WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID,
+ WMI_10_4_PDEV_NFCAL_POWER_EVENTID,
+ WMI_10_4_PDEV_TPC_EVENTID,
+ WMI_10_4_PDEV_GET_AST_INFO_EVENTID,
+ WMI_10_4_PDEV_TEMPERATURE_EVENTID,
+ WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID,
+ WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID,
+ WMI_10_4_MU_REPORT_EVENTID,
+ WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID,
+ WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID,
+ WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID,
+ WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID,
+ WMI_10_4_ATF_PEER_STATS_EVENTID,
+ WMI_10_4_PDEV_GET_RX_FILTER_EVENTID,
+ WMI_10_4_NAC_RSSI_EVENTID,
+ WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID,
+ WMI_10_4_GET_TSF_TIMER_RESP_EVENTID,
+ WMI_10_4_PDEV_TPC_TABLE_EVENTID,
+ WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID,
+ WMI_10_4_TDLS_PEER_EVENTID,
+ WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1,
+};
+
+enum wmi_phy_mode {
+ MODE_11A = 0, /* 11a Mode */
+ MODE_11G = 1, /* 11b/g Mode */
+ MODE_11B = 2, /* 11b Mode */
+ MODE_11GONLY = 3, /* 11g only Mode */
+ MODE_11NA_HT20 = 4, /* 11a HT20 mode */
+ MODE_11NG_HT20 = 5, /* 11g HT20 mode */
+ MODE_11NA_HT40 = 6, /* 11a HT40 mode */
+ MODE_11NG_HT40 = 7, /* 11g HT40 mode */
+ MODE_11AC_VHT20 = 8,
+ MODE_11AC_VHT40 = 9,
+ MODE_11AC_VHT80 = 10,
+ /* MODE_11AC_VHT160 = 11, */
+ MODE_11AC_VHT20_2G = 11,
+ MODE_11AC_VHT40_2G = 12,
+ MODE_11AC_VHT80_2G = 13,
+ MODE_11AC_VHT80_80 = 14,
+ MODE_11AC_VHT160 = 15,
+ MODE_UNKNOWN = 16,
+ MODE_MAX = 16
+};
+
+static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode)
+{
+ switch (mode) {
+ case MODE_11A:
+ return "11a";
+ case MODE_11G:
+ return "11g";
+ case MODE_11B:
+ return "11b";
+ case MODE_11GONLY:
+ return "11gonly";
+ case MODE_11NA_HT20:
+ return "11na-ht20";
+ case MODE_11NG_HT20:
+ return "11ng-ht20";
+ case MODE_11NA_HT40:
+ return "11na-ht40";
+ case MODE_11NG_HT40:
+ return "11ng-ht40";
+ case MODE_11AC_VHT20:
+ return "11ac-vht20";
+ case MODE_11AC_VHT40:
+ return "11ac-vht40";
+ case MODE_11AC_VHT80:
+ return "11ac-vht80";
+ case MODE_11AC_VHT160:
+ return "11ac-vht160";
+ case MODE_11AC_VHT80_80:
+ return "11ac-vht80+80";
+ case MODE_11AC_VHT20_2G:
+ return "11ac-vht20-2g";
+ case MODE_11AC_VHT40_2G:
+ return "11ac-vht40-2g";
+ case MODE_11AC_VHT80_2G:
+ return "11ac-vht80-2g";
+ case MODE_UNKNOWN:
+ /* skip */
+ break;
+
+ /* no default handler to allow compiler to check that the
+ * enum is fully handled
+ */
+ };
+
+ return "<unknown>";
+}
+
+#define WMI_CHAN_LIST_TAG 0x1
+#define WMI_SSID_LIST_TAG 0x2
+#define WMI_BSSID_LIST_TAG 0x3
+#define WMI_IE_TAG 0x4
+
+struct wmi_channel {
+ __le32 mhz;
+ __le32 band_center_freq1;
+ __le32 band_center_freq2; /* valid for 11ac, 80plus80 */
+ union {
+ __le32 flags; /* WMI_CHAN_FLAG_ */
+ struct {
+ u8 mode; /* only 6 LSBs */
+ } __packed;
+ } __packed;
+ union {
+ __le32 reginfo0;
+ struct {
+ /* note: power unit is 0.5 dBm */
+ u8 min_power;
+ u8 max_power;
+ u8 reg_power;
+ u8 reg_classid;
+ } __packed;
+ } __packed;
+ union {
+ __le32 reginfo1;
+ struct {
+ u8 antenna_max;
+ u8 max_tx_power;
+ } __packed;
+ } __packed;
+} __packed;
+
+struct wmi_channel_arg {
+ u32 freq;
+ u32 band_center_freq1;
+ u32 band_center_freq2;
+ bool passive;
+ bool allow_ibss;
+ bool allow_ht;
+ bool allow_vht;
+ bool ht40plus;
+ bool chan_radar;
+ /* note: power unit is 0.5 dBm */
+ u32 min_power;
+ u32 max_power;
+ u32 max_reg_power;
+ u32 max_antenna_gain;
+ u32 reg_class_id;
+ enum wmi_phy_mode mode;
+};
+
+enum wmi_channel_change_cause {
+ WMI_CHANNEL_CHANGE_CAUSE_NONE = 0,
+ WMI_CHANNEL_CHANGE_CAUSE_CSA,
+};
+
+#define WMI_CHAN_FLAG_HT40_PLUS (1 << 6)
+#define WMI_CHAN_FLAG_PASSIVE (1 << 7)
+#define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8)
+#define WMI_CHAN_FLAG_AP_DISABLED (1 << 9)
+#define WMI_CHAN_FLAG_DFS (1 << 10)
+#define WMI_CHAN_FLAG_ALLOW_HT (1 << 11)
+#define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12)
+
+/* Indicate reason for channel switch */
+#define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)
+
+#define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */
+
+/* HT Capabilities*/
+#define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */
+#define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */
+#define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */
+#define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */
+#define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3
+#define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */
+#define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4
+#define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */
+#define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */
+#define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */
+#define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8
+#define WMI_HT_CAP_HT40_SGI 0x0800
+
+#define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \
+ WMI_HT_CAP_HT20_SGI | \
+ WMI_HT_CAP_HT40_SGI | \
+ WMI_HT_CAP_TX_STBC | \
+ WMI_HT_CAP_RX_STBC | \
+ WMI_HT_CAP_LDPC)
+
+/*
+ * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information
+ * field. The fields not defined here are not supported, or reserved.
+ * Do not change these masks and if you have to add new one follow the
+ * bitmask as specified by 802.11ac draft.
+ */
+
+#define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003
+#define WMI_VHT_CAP_RX_LDPC 0x00000010
+#define WMI_VHT_CAP_SGI_80MHZ 0x00000020
+#define WMI_VHT_CAP_SGI_160MHZ 0x00000040
+#define WMI_VHT_CAP_TX_STBC 0x00000080
+#define WMI_VHT_CAP_RX_STBC_MASK 0x00000300
+#define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8
+#define WMI_VHT_CAP_SU_BFER 0x00000800
+#define WMI_VHT_CAP_SU_BFEE 0x00001000
+#define WMI_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000
+#define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13
+#define WMI_VHT_CAP_MAX_SND_DIM_MASK 0x00070000
+#define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16
+#define WMI_VHT_CAP_MU_BFER 0x00080000
+#define WMI_VHT_CAP_MU_BFEE 0x00100000
+#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000
+#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23
+#define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000
+#define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000
+
+/* The following also refer for max HT AMSDU */
+#define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000
+#define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001
+#define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002
+
+#define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \
+ WMI_VHT_CAP_RX_LDPC | \
+ WMI_VHT_CAP_SGI_80MHZ | \
+ WMI_VHT_CAP_TX_STBC | \
+ WMI_VHT_CAP_RX_STBC_MASK | \
+ WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \
+ WMI_VHT_CAP_RX_FIXED_ANT | \
+ WMI_VHT_CAP_TX_FIXED_ANT)
+
+/*
+ * Interested readers refer to Rx/Tx MCS Map definition as defined in
+ * 802.11ac
+ */
+#define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1))
+#define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000
+#define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16
+
+enum {
+ REGDMN_MODE_11A = 0x00001, /* 11a channels */
+ REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */
+ REGDMN_MODE_11B = 0x00004, /* 11b channels */
+ REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */
+ REGDMN_MODE_11G = 0x00008, /* XXX historical */
+ REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */
+ REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */
+ REGDMN_MODE_XR = 0x00100, /* XR channels */
+ REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */
+ REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */
+ REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */
+ REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */
+ REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */
+ REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */
+ REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */
+ REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */
+ REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */
+ REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */
+ REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */
+ REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */
+ REGDMN_MODE_11AC_VHT160 = 0x200000, /* 5Ghz, VHT160 channels */
+ REGDMN_MODE_11AC_VHT80_80 = 0x400000, /* 5Ghz, VHT80+80 channels */
+ REGDMN_MODE_ALL = 0xffffffff
+};
+
+#define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001
+#define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002
+#define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004
+
+/* regulatory capabilities */
+#define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040
+#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080
+#define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100
+#define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200
+#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400
+#define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800
+
+struct hal_reg_capabilities {
+ /* regdomain value specified in EEPROM */
+ __le32 eeprom_rd;
+ /*regdomain */
+ __le32 eeprom_rd_ext;
+ /* CAP1 capabilities bit map. */
+ __le32 regcap1;
+ /* REGDMN EEPROM CAP. */
+ __le32 regcap2;
+ /* REGDMN MODE */
+ __le32 wireless_modes;
+ __le32 low_2ghz_chan;
+ __le32 high_2ghz_chan;
+ __le32 low_5ghz_chan;
+ __le32 high_5ghz_chan;
+} __packed;
+
+enum wlan_mode_capability {
+ WHAL_WLAN_11A_CAPABILITY = 0x1,
+ WHAL_WLAN_11G_CAPABILITY = 0x2,
+ WHAL_WLAN_11AG_CAPABILITY = 0x3,
+};
+
+/* structure used by FW for requesting host memory */
+struct wlan_host_mem_req {
+ /* ID of the request */
+ __le32 req_id;
+ /* size of the of each unit */
+ __le32 unit_size;
+ /* flags to indicate that
+ * the number units is dependent
+ * on number of resources(num vdevs num peers .. etc)
+ */
+ __le32 num_unit_info;
+ /*
+ * actual number of units to allocate . if flags in the num_unit_info
+ * indicate that number of units is tied to number of a particular
+ * resource to allocate then num_units filed is set to 0 and host
+ * will derive the number units from number of the resources it is
+ * requesting.
+ */
+ __le32 num_units;
+} __packed;
+
+/*
+ * The following struct holds optional payload for
+ * wmi_service_ready_event,e.g., 11ac pass some of the
+ * device capability to the host.
+ */
+struct wmi_service_ready_event {
+ __le32 sw_version;
+ __le32 sw_version_1;
+ __le32 abi_version;
+ /* WMI_PHY_CAPABILITY */
+ __le32 phy_capability;
+ /* Maximum number of frag table entries that SW will populate less 1 */
+ __le32 max_frag_entry;
+ __le32 wmi_service_bitmap[16];
+ __le32 num_rf_chains;
+ /*
+ * The following field is only valid for service type
+ * WMI_SERVICE_11AC
+ */
+ __le32 ht_cap_info; /* WMI HT Capability */
+ __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
+ __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
+ __le32 hw_min_tx_power;
+ __le32 hw_max_tx_power;
+ struct hal_reg_capabilities hal_reg_capabilities;
+ __le32 sys_cap_info;
+ __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
+ /*
+ * Max beacon and Probe Response IE offload size
+ * (includes optional P2P IEs)
+ */
+ __le32 max_bcn_ie_size;
+ /*
+ * request to host to allocate a chuck of memory and pss it down to FW
+ * via WM_INIT. FW uses this as FW extesnsion memory for saving its
+ * data structures. Only valid for low latency interfaces like PCIE
+ * where FW can access this memory directly (or) by DMA.
+ */
+ __le32 num_mem_reqs;
+ struct wlan_host_mem_req mem_reqs[0];
+} __packed;
+
+/* This is the definition from 10.X firmware branch */
+struct wmi_10x_service_ready_event {
+ __le32 sw_version;
+ __le32 abi_version;
+
+ /* WMI_PHY_CAPABILITY */
+ __le32 phy_capability;
+
+ /* Maximum number of frag table entries that SW will populate less 1 */
+ __le32 max_frag_entry;
+ __le32 wmi_service_bitmap[16];
+ __le32 num_rf_chains;
+
+ /*
+ * The following field is only valid for service type
+ * WMI_SERVICE_11AC
+ */
+ __le32 ht_cap_info; /* WMI HT Capability */
+ __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
+ __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
+ __le32 hw_min_tx_power;
+ __le32 hw_max_tx_power;
+
+ struct hal_reg_capabilities hal_reg_capabilities;
+
+ __le32 sys_cap_info;
+ __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
+
+ /*
+ * request to host to allocate a chuck of memory and pss it down to FW
+ * via WM_INIT. FW uses this as FW extesnsion memory for saving its
+ * data structures. Only valid for low latency interfaces like PCIE
+ * where FW can access this memory directly (or) by DMA.
+ */
+ __le32 num_mem_reqs;
+
+ struct wlan_host_mem_req mem_reqs[0];
+} __packed;
+
+#define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ)
+#define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ)
+
+struct wmi_ready_event {
+ __le32 sw_version;
+ __le32 abi_version;
+ struct wmi_mac_addr mac_addr;
+ __le32 status;
+} __packed;
+
+struct wmi_resource_config {
+ /* number of virtual devices (VAPs) to support */
+ __le32 num_vdevs;
+
+ /* number of peer nodes to support */
+ __le32 num_peers;
+
+ /*
+ * In offload mode target supports features like WOW, chatter and
+ * other protocol offloads. In order to support them some
+ * functionalities like reorder buffering, PN checking need to be
+ * done in target. This determines maximum number of peers supported
+ * by target in offload mode
+ */
+ __le32 num_offload_peers;
+
+ /* For target-based RX reordering */
+ __le32 num_offload_reorder_bufs;
+
+ /* number of keys per peer */
+ __le32 num_peer_keys;
+
+ /* total number of TX/RX data TIDs */
+ __le32 num_tids;
+
+ /*
+ * max skid for resolving hash collisions
+ *
+ * The address search table is sparse, so that if two MAC addresses
+ * result in the same hash value, the second of these conflicting
+ * entries can slide to the next index in the address search table,
+ * and use it, if it is unoccupied. This ast_skid_limit parameter
+ * specifies the upper bound on how many subsequent indices to search
+ * over to find an unoccupied space.
+ */
+ __le32 ast_skid_limit;
+
+ /*
+ * the nominal chain mask for transmit
+ *
+ * The chain mask may be modified dynamically, e.g. to operate AP
+ * tx with a reduced number of chains if no clients are associated.
+ * This configuration parameter specifies the nominal chain-mask that
+ * should be used when not operating with a reduced set of tx chains.
+ */
+ __le32 tx_chain_mask;
+
+ /*
+ * the nominal chain mask for receive
+ *
+ * The chain mask may be modified dynamically, e.g. for a client
+ * to use a reduced number of chains for receive if the traffic to
+ * the client is low enough that it doesn't require downlink MIMO
+ * or antenna diversity.
+ * This configuration parameter specifies the nominal chain-mask that
+ * should be used when not operating with a reduced set of rx chains.
+ */
+ __le32 rx_chain_mask;
+
+ /*
+ * what rx reorder timeout (ms) to use for the AC
+ *
+ * Each WMM access class (voice, video, best-effort, background) will
+ * have its own timeout value to dictate how long to wait for missing
+ * rx MPDUs to arrive before flushing subsequent MPDUs that have
+ * already been received.
+ * This parameter specifies the timeout in milliseconds for each
+ * class.
+ */
+ __le32 rx_timeout_pri_vi;
+ __le32 rx_timeout_pri_vo;
+ __le32 rx_timeout_pri_be;
+ __le32 rx_timeout_pri_bk;
+
+ /*
+ * what mode the rx should decap packets to
+ *
+ * MAC can decap to RAW (no decap), native wifi or Ethernet types
+ * THis setting also determines the default TX behavior, however TX
+ * behavior can be modified on a per VAP basis during VAP init
+ */
+ __le32 rx_decap_mode;
+
+ /* what is the maximum number of scan requests that can be queued */
+ __le32 scan_max_pending_reqs;
+
+ /* maximum VDEV that could use BMISS offload */
+ __le32 bmiss_offload_max_vdev;
+
+ /* maximum VDEV that could use offload roaming */
+ __le32 roam_offload_max_vdev;
+
+ /* maximum AP profiles that would push to offload roaming */
+ __le32 roam_offload_max_ap_profiles;
+
+ /*
+ * how many groups to use for mcast->ucast conversion
+ *
+ * The target's WAL maintains a table to hold information regarding
+ * which peers belong to a given multicast group, so that if
+ * multicast->unicast conversion is enabled, the target can convert
+ * multicast tx frames to a series of unicast tx frames, to each
+ * peer within the multicast group.
+ This num_mcast_groups configuration parameter tells the target how
+ * many multicast groups to provide storage for within its multicast
+ * group membership table.
+ */
+ __le32 num_mcast_groups;
+
+ /*
+ * size to alloc for the mcast membership table
+ *
+ * This num_mcast_table_elems configuration parameter tells the
+ * target how many peer elements it needs to provide storage for in
+ * its multicast group membership table.
+ * These multicast group membership table elements are shared by the
+ * multicast groups stored within the table.
+ */
+ __le32 num_mcast_table_elems;
+
+ /*
+ * whether/how to do multicast->unicast conversion
+ *
+ * This configuration parameter specifies whether the target should
+ * perform multicast --> unicast conversion on transmit, and if so,
+ * what to do if it finds no entries in its multicast group
+ * membership table for the multicast IP address in the tx frame.
+ * Configuration value:
+ * 0 -> Do not perform multicast to unicast conversion.
+ * 1 -> Convert multicast frames to unicast, if the IP multicast
+ * address from the tx frame is found in the multicast group
+ * membership table. If the IP multicast address is not found,
+ * drop the frame.
+ * 2 -> Convert multicast frames to unicast, if the IP multicast
+ * address from the tx frame is found in the multicast group
+ * membership table. If the IP multicast address is not found,
+ * transmit the frame as multicast.
+ */
+ __le32 mcast2ucast_mode;
+
+ /*
+ * how much memory to allocate for a tx PPDU dbg log
+ *
+ * This parameter controls how much memory the target will allocate
+ * to store a log of tx PPDU meta-information (how large the PPDU
+ * was, when it was sent, whether it was successful, etc.)
+ */
+ __le32 tx_dbg_log_size;
+
+ /* how many AST entries to be allocated for WDS */
+ __le32 num_wds_entries;
+
+ /*
+ * MAC DMA burst size, e.g., For target PCI limit can be
+ * 0 -default, 1 256B
+ */
+ __le32 dma_burst_size;
+
+ /*
+ * Fixed delimiters to be inserted after every MPDU to
+ * account for interface latency to avoid underrun.
+ */
+ __le32 mac_aggr_delim;
+
+ /*
+ * determine whether target is responsible for detecting duplicate
+ * non-aggregate MPDU and timing out stale fragments.
+ *
+ * A-MPDU reordering is always performed on the target.
+ *
+ * 0: target responsible for frag timeout and dup checking
+ * 1: host responsible for frag timeout and dup checking
+ */
+ __le32 rx_skip_defrag_timeout_dup_detection_check;
+
+ /*
+ * Configuration for VoW :
+ * No of Video Nodes to be supported
+ * and Max no of descriptors for each Video link (node).
+ */
+ __le32 vow_config;
+
+ /* maximum VDEV that could use GTK offload */
+ __le32 gtk_offload_max_vdev;
+
+ /* Number of msdu descriptors target should use */
+ __le32 num_msdu_desc;
+
+ /*
+ * Max. number of Tx fragments per MSDU
+ * This parameter controls the max number of Tx fragments per MSDU.
+ * This is sent by the target as part of the WMI_SERVICE_READY event
+ * and is overridden by the OS shim as required.
+ */
+ __le32 max_frag_entries;
+} __packed;
+
+struct wmi_resource_config_10x {
+ /* number of virtual devices (VAPs) to support */
+ __le32 num_vdevs;
+
+ /* number of peer nodes to support */
+ __le32 num_peers;
+
+ /* number of keys per peer */
+ __le32 num_peer_keys;
+
+ /* total number of TX/RX data TIDs */
+ __le32 num_tids;
+
+ /*
+ * max skid for resolving hash collisions
+ *
+ * The address search table is sparse, so that if two MAC addresses
+ * result in the same hash value, the second of these conflicting
+ * entries can slide to the next index in the address search table,
+ * and use it, if it is unoccupied. This ast_skid_limit parameter
+ * specifies the upper bound on how many subsequent indices to search
+ * over to find an unoccupied space.
+ */
+ __le32 ast_skid_limit;
+
+ /*
+ * the nominal chain mask for transmit
+ *
+ * The chain mask may be modified dynamically, e.g. to operate AP
+ * tx with a reduced number of chains if no clients are associated.
+ * This configuration parameter specifies the nominal chain-mask that
+ * should be used when not operating with a reduced set of tx chains.
+ */
+ __le32 tx_chain_mask;
+
+ /*
+ * the nominal chain mask for receive
+ *
+ * The chain mask may be modified dynamically, e.g. for a client
+ * to use a reduced number of chains for receive if the traffic to
+ * the client is low enough that it doesn't require downlink MIMO
+ * or antenna diversity.
+ * This configuration parameter specifies the nominal chain-mask that
+ * should be used when not operating with a reduced set of rx chains.
+ */
+ __le32 rx_chain_mask;
+
+ /*
+ * what rx reorder timeout (ms) to use for the AC
+ *
+ * Each WMM access class (voice, video, best-effort, background) will
+ * have its own timeout value to dictate how long to wait for missing
+ * rx MPDUs to arrive before flushing subsequent MPDUs that have
+ * already been received.
+ * This parameter specifies the timeout in milliseconds for each
+ * class.
+ */
+ __le32 rx_timeout_pri_vi;
+ __le32 rx_timeout_pri_vo;
+ __le32 rx_timeout_pri_be;
+ __le32 rx_timeout_pri_bk;
+
+ /*
+ * what mode the rx should decap packets to
+ *
+ * MAC can decap to RAW (no decap), native wifi or Ethernet types
+ * THis setting also determines the default TX behavior, however TX
+ * behavior can be modified on a per VAP basis during VAP init
+ */
+ __le32 rx_decap_mode;
+
+ /* what is the maximum number of scan requests that can be queued */
+ __le32 scan_max_pending_reqs;
+
+ /* maximum VDEV that could use BMISS offload */
+ __le32 bmiss_offload_max_vdev;
+
+ /* maximum VDEV that could use offload roaming */
+ __le32 roam_offload_max_vdev;
+
+ /* maximum AP profiles that would push to offload roaming */
+ __le32 roam_offload_max_ap_profiles;
+
+ /*
+ * how many groups to use for mcast->ucast conversion
+ *
+ * The target's WAL maintains a table to hold information regarding
+ * which peers belong to a given multicast group, so that if
+ * multicast->unicast conversion is enabled, the target can convert
+ * multicast tx frames to a series of unicast tx frames, to each
+ * peer within the multicast group.
+ This num_mcast_groups configuration parameter tells the target how
+ * many multicast groups to provide storage for within its multicast
+ * group membership table.
+ */
+ __le32 num_mcast_groups;
+
+ /*
+ * size to alloc for the mcast membership table
+ *
+ * This num_mcast_table_elems configuration parameter tells the
+ * target how many peer elements it needs to provide storage for in
+ * its multicast group membership table.
+ * These multicast group membership table elements are shared by the
+ * multicast groups stored within the table.
+ */
+ __le32 num_mcast_table_elems;
+
+ /*
+ * whether/how to do multicast->unicast conversion
+ *
+ * This configuration parameter specifies whether the target should
+ * perform multicast --> unicast conversion on transmit, and if so,
+ * what to do if it finds no entries in its multicast group
+ * membership table for the multicast IP address in the tx frame.
+ * Configuration value:
+ * 0 -> Do not perform multicast to unicast conversion.
+ * 1 -> Convert multicast frames to unicast, if the IP multicast
+ * address from the tx frame is found in the multicast group
+ * membership table. If the IP multicast address is not found,
+ * drop the frame.
+ * 2 -> Convert multicast frames to unicast, if the IP multicast
+ * address from the tx frame is found in the multicast group
+ * membership table. If the IP multicast address is not found,
+ * transmit the frame as multicast.
+ */
+ __le32 mcast2ucast_mode;
+
+ /*
+ * how much memory to allocate for a tx PPDU dbg log
+ *
+ * This parameter controls how much memory the target will allocate
+ * to store a log of tx PPDU meta-information (how large the PPDU
+ * was, when it was sent, whether it was successful, etc.)
+ */
+ __le32 tx_dbg_log_size;
+
+ /* how many AST entries to be allocated for WDS */
+ __le32 num_wds_entries;
+
+ /*
+ * MAC DMA burst size, e.g., For target PCI limit can be
+ * 0 -default, 1 256B
+ */
+ __le32 dma_burst_size;
+
+ /*
+ * Fixed delimiters to be inserted after every MPDU to
+ * account for interface latency to avoid underrun.
+ */
+ __le32 mac_aggr_delim;
+
+ /*
+ * determine whether target is responsible for detecting duplicate
+ * non-aggregate MPDU and timing out stale fragments.
+ *
+ * A-MPDU reordering is always performed on the target.
+ *
+ * 0: target responsible for frag timeout and dup checking
+ * 1: host responsible for frag timeout and dup checking
+ */
+ __le32 rx_skip_defrag_timeout_dup_detection_check;
+
+ /*
+ * Configuration for VoW :
+ * No of Video Nodes to be supported
+ * and Max no of descriptors for each Video link (node).
+ */
+ __le32 vow_config;
+
+ /* Number of msdu descriptors target should use */
+ __le32 num_msdu_desc;
+
+ /*
+ * Max. number of Tx fragments per MSDU
+ * This parameter controls the max number of Tx fragments per MSDU.
+ * This is sent by the target as part of the WMI_SERVICE_READY event
+ * and is overridden by the OS shim as required.
+ */
+ __le32 max_frag_entries;
+} __packed;
+
+enum wmi_10_2_feature_mask {
+ WMI_10_2_RX_BATCH_MODE = BIT(0),
+ WMI_10_2_ATF_CONFIG = BIT(1),
+ WMI_10_2_COEX_GPIO = BIT(3),
+ WMI_10_2_BSS_CHAN_INFO = BIT(6),
+ WMI_10_2_PEER_STATS = BIT(7),
+};
+
+struct wmi_resource_config_10_2 {
+ struct wmi_resource_config_10x common;
+ __le32 max_peer_ext_stats;
+ __le32 smart_ant_cap; /* 0-disable, 1-enable */
+ __le32 bk_min_free;
+ __le32 be_min_free;
+ __le32 vi_min_free;
+ __le32 vo_min_free;
+ __le32 feature_mask;
+} __packed;
+
+#define NUM_UNITS_IS_NUM_VDEVS BIT(0)
+#define NUM_UNITS_IS_NUM_PEERS BIT(1)
+#define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2)
+
+struct wmi_resource_config_10_4 {
+ /* Number of virtual devices (VAPs) to support */
+ __le32 num_vdevs;
+
+ /* Number of peer nodes to support */
+ __le32 num_peers;
+
+ /* Number of active peer nodes to support */
+ __le32 num_active_peers;
+
+ /* In offload mode, target supports features like WOW, chatter and other
+ * protocol offloads. In order to support them some functionalities like
+ * reorder buffering, PN checking need to be done in target.
+ * This determines maximum number of peers supported by target in
+ * offload mode.
+ */
+ __le32 num_offload_peers;
+
+ /* Number of reorder buffers available for doing target based reorder
+ * Rx reorder buffering
+ */
+ __le32 num_offload_reorder_buffs;
+
+ /* Number of keys per peer */
+ __le32 num_peer_keys;
+
+ /* Total number of TX/RX data TIDs */
+ __le32 num_tids;
+
+ /* Max skid for resolving hash collisions.
+ * The address search table is sparse, so that if two MAC addresses
+ * result in the same hash value, the second of these conflicting
+ * entries can slide to the next index in the address search table,
+ * and use it, if it is unoccupied. This ast_skid_limit parameter
+ * specifies the upper bound on how many subsequent indices to search
+ * over to find an unoccupied space.
+ */
+ __le32 ast_skid_limit;
+
+ /* The nominal chain mask for transmit.
+ * The chain mask may be modified dynamically, e.g. to operate AP tx
+ * with a reduced number of chains if no clients are associated.
+ * This configuration parameter specifies the nominal chain-mask that
+ * should be used when not operating with a reduced set of tx chains.
+ */
+ __le32 tx_chain_mask;
+
+ /* The nominal chain mask for receive.
+ * The chain mask may be modified dynamically, e.g. for a client to use
+ * a reduced number of chains for receive if the traffic to the client
+ * is low enough that it doesn't require downlink MIMO or antenna
+ * diversity. This configuration parameter specifies the nominal
+ * chain-mask that should be used when not operating with a reduced
+ * set of rx chains.
+ */
+ __le32 rx_chain_mask;
+
+ /* What rx reorder timeout (ms) to use for the AC.
+ * Each WMM access class (voice, video, best-effort, background) will
+ * have its own timeout value to dictate how long to wait for missing
+ * rx MPDUs to arrive before flushing subsequent MPDUs that have already
+ * been received. This parameter specifies the timeout in milliseconds
+ * for each class.
+ */
+ __le32 rx_timeout_pri[4];
+
+ /* What mode the rx should decap packets to.
+ * MAC can decap to RAW (no decap), native wifi or Ethernet types.
+ * This setting also determines the default TX behavior, however TX
+ * behavior can be modified on a per VAP basis during VAP init
+ */
+ __le32 rx_decap_mode;
+
+ __le32 scan_max_pending_req;
+
+ __le32 bmiss_offload_max_vdev;
+
+ __le32 roam_offload_max_vdev;
+
+ __le32 roam_offload_max_ap_profiles;
+
+ /* How many groups to use for mcast->ucast conversion.
+ * The target's WAL maintains a table to hold information regarding
+ * which peers belong to a given multicast group, so that if
+ * multicast->unicast conversion is enabled, the target can convert
+ * multicast tx frames to a series of unicast tx frames, to each peer
+ * within the multicast group. This num_mcast_groups configuration
+ * parameter tells the target how many multicast groups to provide
+ * storage for within its multicast group membership table.
+ */
+ __le32 num_mcast_groups;
+
+ /* Size to alloc for the mcast membership table.
+ * This num_mcast_table_elems configuration parameter tells the target
+ * how many peer elements it needs to provide storage for in its
+ * multicast group membership table. These multicast group membership
+ * table elements are shared by the multicast groups stored within
+ * the table.
+ */
+ __le32 num_mcast_table_elems;
+
+ /* Whether/how to do multicast->unicast conversion.
+ * This configuration parameter specifies whether the target should
+ * perform multicast --> unicast conversion on transmit, and if so,
+ * what to do if it finds no entries in its multicast group membership
+ * table for the multicast IP address in the tx frame.
+ * Configuration value:
+ * 0 -> Do not perform multicast to unicast conversion.
+ * 1 -> Convert multicast frames to unicast, if the IP multicast address
+ * from the tx frame is found in the multicast group membership
+ * table. If the IP multicast address is not found, drop the frame
+ * 2 -> Convert multicast frames to unicast, if the IP multicast address
+ * from the tx frame is found in the multicast group membership
+ * table. If the IP multicast address is not found, transmit the
+ * frame as multicast.
+ */
+ __le32 mcast2ucast_mode;
+
+ /* How much memory to allocate for a tx PPDU dbg log.
+ * This parameter controls how much memory the target will allocate to
+ * store a log of tx PPDU meta-information (how large the PPDU was,
+ * when it was sent, whether it was successful, etc.)
+ */
+ __le32 tx_dbg_log_size;
+
+ /* How many AST entries to be allocated for WDS */
+ __le32 num_wds_entries;
+
+ /* MAC DMA burst size. 0 -default, 1 -256B */
+ __le32 dma_burst_size;
+
+ /* Fixed delimiters to be inserted after every MPDU to account for
+ * interface latency to avoid underrun.
+ */
+ __le32 mac_aggr_delim;
+
+ /* Determine whether target is responsible for detecting duplicate
+ * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering
+ * is always performed on the target.
+ *
+ * 0: target responsible for frag timeout and dup checking
+ * 1: host responsible for frag timeout and dup checking
+ */
+ __le32 rx_skip_defrag_timeout_dup_detection_check;
+
+ /* Configuration for VoW : No of Video nodes to be supported and max
+ * no of descriptors for each video link (node).
+ */
+ __le32 vow_config;
+
+ /* Maximum vdev that could use gtk offload */
+ __le32 gtk_offload_max_vdev;
+
+ /* Number of msdu descriptors target should use */
+ __le32 num_msdu_desc;
+
+ /* Max number of tx fragments per MSDU.
+ * This parameter controls the max number of tx fragments per MSDU.
+ * This will passed by target as part of the WMI_SERVICE_READY event
+ * and is overridden by the OS shim as required.
+ */
+ __le32 max_frag_entries;
+
+ /* Max number of extended peer stats.
+ * This parameter controls the max number of peers for which extended
+ * statistics are supported by target
+ */
+ __le32 max_peer_ext_stats;
+
+ /* Smart antenna capabilities information.
+ * 1 - Smart antenna is enabled
+ * 0 - Smart antenna is disabled
+ * In future this can contain smart antenna specific capabilities.
+ */
+ __le32 smart_ant_cap;
+
+ /* User can configure the buffers allocated for each AC (BE, BK, VI, VO)
+ * during init.
+ */
+ __le32 bk_minfree;
+ __le32 be_minfree;
+ __le32 vi_minfree;
+ __le32 vo_minfree;
+
+ /* Rx batch mode capability.
+ * 1 - Rx batch mode enabled
+ * 0 - Rx batch mode disabled
+ */
+ __le32 rx_batchmode;
+
+ /* Thermal throttling capability.
+ * 1 - Capable of thermal throttling
+ * 0 - Not capable of thermal throttling
+ */
+ __le32 tt_support;
+
+ /* ATF configuration.
+ * 1 - Enable ATF
+ * 0 - Disable ATF
+ */
+ __le32 atf_config;
+
+ /* Configure padding to manage IP header un-alignment
+ * 1 - Enable padding
+ * 0 - Disable padding
+ */
+ __le32 iphdr_pad_config;
+
+ /* qwrap configuration (bits 15-0)
+ * 1 - This is qwrap configuration
+ * 0 - This is not qwrap
+ *
+ * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables)
+ * In order to get ack-RSSI reporting and to specify the tx-rate for
+ * individual frames, this option must be enabled. This uses an extra
+ * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it.
+ */
+ __le32 qwrap_config;
+} __packed;
+
+enum wmi_coex_version {
+ WMI_NO_COEX_VERSION_SUPPORT = 0,
+ /* 3 wire coex support*/
+ WMI_COEX_VERSION_1 = 1,
+ /* 2.5 wire coex support*/
+ WMI_COEX_VERSION_2 = 2,
+ /* 2.5 wire coex with duty cycle support */
+ WMI_COEX_VERSION_3 = 3,
+ /* 4 wire coex support*/
+ WMI_COEX_VERSION_4 = 4,
+};
+
+/**
+ * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags
+ * @WMI_10_4_LTEU_SUPPORT: LTEU config
+ * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config
+ * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan
+ * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan
+ * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats
+ * @WMI_10_4_PEER_STATS: Per station stats
+ * @WMI_10_4_VDEV_STATS: Per vdev stats
+ * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable
+ * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable
+ * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable
+ * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable
+ * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host
+ * enable/disable
+ * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY:Explicit TDLS mode enable/disable
+ */
+enum wmi_10_4_feature_mask {
+ WMI_10_4_LTEU_SUPPORT = BIT(0),
+ WMI_10_4_COEX_GPIO_SUPPORT = BIT(1),
+ WMI_10_4_AUX_RADIO_SPECTRAL_INTF = BIT(2),
+ WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF = BIT(3),
+ WMI_10_4_BSS_CHANNEL_INFO_64 = BIT(4),
+ WMI_10_4_PEER_STATS = BIT(5),
+ WMI_10_4_VDEV_STATS = BIT(6),
+ WMI_10_4_TDLS = BIT(7),
+ WMI_10_4_TDLS_OFFCHAN = BIT(8),
+ WMI_10_4_TDLS_UAPSD_BUFFER_STA = BIT(9),
+ WMI_10_4_TDLS_UAPSD_SLEEP_STA = BIT(10),
+ WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11),
+ WMI_10_4_TDLS_EXPLICIT_MODE_ONLY = BIT(12),
+
+};
+
+struct wmi_ext_resource_config_10_4_cmd {
+ /* contains enum wmi_host_platform_type */
+ __le32 host_platform_config;
+ /* see enum wmi_10_4_feature_mask */
+ __le32 fw_feature_bitmap;
+ /* WLAN priority GPIO number */
+ __le32 wlan_gpio_priority;
+ /* see enum wmi_coex_version */
+ __le32 coex_version;
+ /* COEX GPIO config */
+ __le32 coex_gpio_pin1;
+ __le32 coex_gpio_pin2;
+ __le32 coex_gpio_pin3;
+ /* number of vdevs allowed to perform tdls */
+ __le32 num_tdls_vdevs;
+ /* number of peers to track per TDLS vdev */
+ __le32 num_tdls_conn_table_entries;
+ /* number of tdls sleep sta supported */
+ __le32 max_tdls_concurrent_sleep_sta;
+ /* number of tdls buffer sta supported */
+ __le32 max_tdls_concurrent_buffer_sta;
+};
+
+/* strucutre describing host memory chunk. */
+struct host_memory_chunk {
+ /* id of the request that is passed up in service ready */
+ __le32 req_id;
+ /* the physical address the memory chunk */
+ __le32 ptr;
+ /* size of the chunk */
+ __le32 size;
+} __packed;
+
+struct wmi_host_mem_chunks {
+ __le32 count;
+ /* some fw revisions require at least 1 chunk regardless of count */
+ struct host_memory_chunk items[1];
+} __packed;
+
+struct wmi_init_cmd {
+ struct wmi_resource_config resource_config;
+ struct wmi_host_mem_chunks mem_chunks;
+} __packed;
+
+/* _10x structure is from 10.X FW API */
+struct wmi_init_cmd_10x {
+ struct wmi_resource_config_10x resource_config;
+ struct wmi_host_mem_chunks mem_chunks;
+} __packed;
+
+struct wmi_init_cmd_10_2 {
+ struct wmi_resource_config_10_2 resource_config;
+ struct wmi_host_mem_chunks mem_chunks;
+} __packed;
+
+struct wmi_init_cmd_10_4 {
+ struct wmi_resource_config_10_4 resource_config;
+ struct wmi_host_mem_chunks mem_chunks;
+} __packed;
+
+struct wmi_chan_list_entry {
+ __le16 freq;
+ u8 phy_mode; /* valid for 10.2 only */
+ u8 reserved;
+} __packed;
+
+/* TLV for channel list */
+struct wmi_chan_list {
+ __le32 tag; /* WMI_CHAN_LIST_TAG */
+ __le32 num_chan;
+ struct wmi_chan_list_entry channel_list[0];
+} __packed;
+
+struct wmi_bssid_list {
+ __le32 tag; /* WMI_BSSID_LIST_TAG */
+ __le32 num_bssid;
+ struct wmi_mac_addr bssid_list[0];
+} __packed;
+
+struct wmi_ie_data {
+ __le32 tag; /* WMI_IE_TAG */
+ __le32 ie_len;
+ u8 ie_data[0];
+} __packed;
+
+struct wmi_ssid {
+ __le32 ssid_len;
+ u8 ssid[32];
+} __packed;
+
+struct wmi_ssid_list {
+ __le32 tag; /* WMI_SSID_LIST_TAG */
+ __le32 num_ssids;
+ struct wmi_ssid ssids[0];
+} __packed;
+
+/* prefix used by scan requestor ids on the host */
+#define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000
+
+/* prefix used by scan request ids generated on the host */
+/* host cycles through the lower 12 bits to generate ids */
+#define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000
+
+#define WLAN_SCAN_PARAMS_MAX_SSID 16
+#define WLAN_SCAN_PARAMS_MAX_BSSID 4
+#define WLAN_SCAN_PARAMS_MAX_IE_LEN 256
+
+/* Values lower than this may be refused by some firmware revisions with a scan
+ * completion with a timedout reason.
+ */
+#define WMI_SCAN_CHAN_MIN_TIME_MSEC 40
+
+/* Scan priority numbers must be sequential, starting with 0 */
+enum wmi_scan_priority {
+ WMI_SCAN_PRIORITY_VERY_LOW = 0,
+ WMI_SCAN_PRIORITY_LOW,
+ WMI_SCAN_PRIORITY_MEDIUM,
+ WMI_SCAN_PRIORITY_HIGH,
+ WMI_SCAN_PRIORITY_VERY_HIGH,
+ WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */
+};
+
+struct wmi_start_scan_common {
+ /* Scan ID */
+ __le32 scan_id;
+ /* Scan requestor ID */
+ __le32 scan_req_id;
+ /* VDEV id(interface) that is requesting scan */
+ __le32 vdev_id;
+ /* Scan Priority, input to scan scheduler */
+ __le32 scan_priority;
+ /* Scan events subscription */
+ __le32 notify_scan_events;
+ /* dwell time in msec on active channels */
+ __le32 dwell_time_active;
+ /* dwell time in msec on passive channels */
+ __le32 dwell_time_passive;
+ /*
+ * min time in msec on the BSS channel,only valid if atleast one
+ * VDEV is active
+ */
+ __le32 min_rest_time;
+ /*
+ * max rest time in msec on the BSS channel,only valid if at least
+ * one VDEV is active
+ */
+ /*
+ * the scanner will rest on the bss channel at least min_rest_time
+ * after min_rest_time the scanner will start checking for tx/rx
+ * activity on all VDEVs. if there is no activity the scanner will
+ * switch to off channel. if there is activity the scanner will let
+ * the radio on the bss channel until max_rest_time expires.at
+ * max_rest_time scanner will switch to off channel irrespective of
+ * activity. activity is determined by the idle_time parameter.
+ */
+ __le32 max_rest_time;
+ /*
+ * time before sending next set of probe requests.
+ * The scanner keeps repeating probe requests transmission with
+ * period specified by repeat_probe_time.
+ * The number of probe requests specified depends on the ssid_list
+ * and bssid_list
+ */
+ __le32 repeat_probe_time;
+ /* time in msec between 2 consequetive probe requests with in a set. */
+ __le32 probe_spacing_time;
+ /*
+ * data inactivity time in msec on bss channel that will be used by
+ * scanner for measuring the inactivity.
+ */
+ __le32 idle_time;
+ /* maximum time in msec allowed for scan */
+ __le32 max_scan_time;
+ /*
+ * delay in msec before sending first probe request after switching
+ * to a channel
+ */
+ __le32 probe_delay;
+ /* Scan control flags */
+ __le32 scan_ctrl_flags;
+} __packed;
+
+struct wmi_start_scan_tlvs {
+ /* TLV parameters. These includes channel list, ssid list, bssid list,
+ * extra ies.
+ */
+ u8 tlvs[0];
+} __packed;
+
+struct wmi_start_scan_cmd {
+ struct wmi_start_scan_common common;
+ __le32 burst_duration_ms;
+ struct wmi_start_scan_tlvs tlvs;
+} __packed;
+
+/* This is the definition from 10.X firmware branch */
+struct wmi_10x_start_scan_cmd {
+ struct wmi_start_scan_common common;
+ struct wmi_start_scan_tlvs tlvs;
+} __packed;
+
+struct wmi_ssid_arg {
+ int len;
+ const u8 *ssid;
+};
+
+struct wmi_bssid_arg {
+ const u8 *bssid;
+};
+
+struct wmi_start_scan_arg {
+ u32 scan_id;
+ u32 scan_req_id;
+ u32 vdev_id;
+ u32 scan_priority;
+ u32 notify_scan_events;
+ u32 dwell_time_active;
+ u32 dwell_time_passive;
+ u32 min_rest_time;
+ u32 max_rest_time;
+ u32 repeat_probe_time;
+ u32 probe_spacing_time;
+ u32 idle_time;
+ u32 max_scan_time;
+ u32 probe_delay;
+ u32 scan_ctrl_flags;
+ u32 burst_duration_ms;
+
+ u32 ie_len;
+ u32 n_channels;
+ u32 n_ssids;
+ u32 n_bssids;
+
+ u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN];
+ u16 channels[64];
+ struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID];
+ struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID];
+};
+
+/* scan control flags */
+
+/* passively scan all channels including active channels */
+#define WMI_SCAN_FLAG_PASSIVE 0x1
+/* add wild card ssid probe request even though ssid_list is specified. */
+#define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2
+/* add cck rates to rates/xrate ie for the generated probe request */
+#define WMI_SCAN_ADD_CCK_RATES 0x4
+/* add ofdm rates to rates/xrate ie for the generated probe request */
+#define WMI_SCAN_ADD_OFDM_RATES 0x8
+/* To enable indication of Chan load and Noise floor to host */
+#define WMI_SCAN_CHAN_STAT_EVENT 0x10
+/* Filter Probe request frames */
+#define WMI_SCAN_FILTER_PROBE_REQ 0x20
+/* When set, DFS channels will not be scanned */
+#define WMI_SCAN_BYPASS_DFS_CHN 0x40
+/* Different FW scan engine may choose to bail out on errors.
+ * Allow the driver to have influence over that.
+ */
+#define WMI_SCAN_CONTINUE_ON_ERROR 0x80
+
+/* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
+#define WMI_SCAN_CLASS_MASK 0xFF000000
+
+enum wmi_stop_scan_type {
+ WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */
+ WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */
+ WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */
+};
+
+struct wmi_stop_scan_cmd {
+ __le32 scan_req_id;
+ __le32 scan_id;
+ __le32 req_type;
+ __le32 vdev_id;
+} __packed;
+
+struct wmi_stop_scan_arg {
+ u32 req_id;
+ enum wmi_stop_scan_type req_type;
+ union {
+ u32 scan_id;
+ u32 vdev_id;
+ } u;
+};
+
+struct wmi_scan_chan_list_cmd {
+ __le32 num_scan_chans;
+ struct wmi_channel chan_info[0];
+} __packed;
+
+struct wmi_scan_chan_list_arg {
+ u32 n_channels;
+ struct wmi_channel_arg *channels;
+};
+
+enum wmi_bss_filter {
+ WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */
+ WMI_BSS_FILTER_ALL, /* all beacons forwarded */
+ WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */
+ WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */
+ WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */
+ WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */
+ WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */
+ WMI_BSS_FILTER_LAST_BSS, /* marker only */
+};
+
+enum wmi_scan_event_type {
+ WMI_SCAN_EVENT_STARTED = BIT(0),
+ WMI_SCAN_EVENT_COMPLETED = BIT(1),
+ WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2),
+ WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3),
+ WMI_SCAN_EVENT_DEQUEUED = BIT(4),
+ /* possibly by high-prio scan */
+ WMI_SCAN_EVENT_PREEMPTED = BIT(5),
+ WMI_SCAN_EVENT_START_FAILED = BIT(6),
+ WMI_SCAN_EVENT_RESTARTED = BIT(7),
+ WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8),
+ WMI_SCAN_EVENT_MAX = BIT(15),
+};
+
+enum wmi_scan_completion_reason {
+ WMI_SCAN_REASON_COMPLETED,
+ WMI_SCAN_REASON_CANCELLED,
+ WMI_SCAN_REASON_PREEMPTED,
+ WMI_SCAN_REASON_TIMEDOUT,
+ WMI_SCAN_REASON_INTERNAL_FAILURE,
+ WMI_SCAN_REASON_MAX,
+};
+
+struct wmi_scan_event {
+ __le32 event_type; /* %WMI_SCAN_EVENT_ */
+ __le32 reason; /* %WMI_SCAN_REASON_ */
+ __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
+ __le32 scan_req_id;
+ __le32 scan_id;
+ __le32 vdev_id;
+} __packed;
+
+/*
+ * This defines how much headroom is kept in the
+ * receive frame between the descriptor and the
+ * payload, in order for the WMI PHY error and
+ * management handler to insert header contents.
+ *
+ * This is in bytes.
+ */
+#define WMI_MGMT_RX_HDR_HEADROOM 52
+
+/*
+ * This event will be used for sending scan results
+ * as well as rx mgmt frames to the host. The rx buffer
+ * will be sent as part of this WMI event. It would be a
+ * good idea to pass all the fields in the RX status
+ * descriptor up to the host.
+ */
+struct wmi_mgmt_rx_hdr_v1 {
+ __le32 channel;
+ __le32 snr;
+ __le32 rate;
+ __le32 phy_mode;
+ __le32 buf_len;
+ __le32 status; /* %WMI_RX_STATUS_ */
+} __packed;
+
+struct wmi_mgmt_rx_hdr_v2 {
+ struct wmi_mgmt_rx_hdr_v1 v1;
+ __le32 rssi_ctl[4];
+} __packed;
+
+struct wmi_mgmt_rx_event_v1 {
+ struct wmi_mgmt_rx_hdr_v1 hdr;
+ u8 buf[0];
+} __packed;
+
+struct wmi_mgmt_rx_event_v2 {
+ struct wmi_mgmt_rx_hdr_v2 hdr;
+ u8 buf[0];
+} __packed;
+
+struct wmi_10_4_mgmt_rx_hdr {
+ __le32 channel;
+ __le32 snr;
+ u8 rssi_ctl[4];
+ __le32 rate;
+ __le32 phy_mode;
+ __le32 buf_len;
+ __le32 status;
+} __packed;
+
+struct wmi_10_4_mgmt_rx_event {
+ struct wmi_10_4_mgmt_rx_hdr hdr;
+ u8 buf[0];
+} __packed;
+
+struct wmi_mgmt_rx_ext_info {
+ __le64 rx_mac_timestamp;
+} __packed __aligned(4);
+
+#define WMI_RX_STATUS_OK 0x00
+#define WMI_RX_STATUS_ERR_CRC 0x01
+#define WMI_RX_STATUS_ERR_DECRYPT 0x08
+#define WMI_RX_STATUS_ERR_MIC 0x10
+#define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20
+/* Extension data at the end of mgmt frame */
+#define WMI_RX_STATUS_EXT_INFO 0x40
+
+#define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26
+#define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24
+#define PHY_ERROR_GEN_RADAR 0x05
+
+#define PHY_ERROR_10_4_RADAR_MASK 0x4
+#define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000
+
+enum phy_err_type {
+ PHY_ERROR_UNKNOWN,
+ PHY_ERROR_SPECTRAL_SCAN,
+ PHY_ERROR_FALSE_RADAR_EXT,
+ PHY_ERROR_RADAR
+};
+
+struct wmi_phyerr {
+ __le32 tsf_timestamp;
+ __le16 freq1;
+ __le16 freq2;
+ u8 rssi_combined;
+ u8 chan_width_mhz;
+ u8 phy_err_code;
+ u8 rsvd0;
+ __le32 rssi_chains[4];
+ __le16 nf_chains[4];
+ __le32 buf_len;
+ u8 buf[0];
+} __packed;
+
+struct wmi_phyerr_event {
+ __le32 num_phyerrs;
+ __le32 tsf_l32;
+ __le32 tsf_u32;
+ struct wmi_phyerr phyerrs[0];
+} __packed;
+
+struct wmi_10_4_phyerr_event {
+ __le32 tsf_l32;
+ __le32 tsf_u32;
+ __le16 freq1;
+ __le16 freq2;
+ u8 rssi_combined;
+ u8 chan_width_mhz;
+ u8 phy_err_code;
+ u8 rsvd0;
+ __le32 rssi_chains[4];
+ __le16 nf_chains[4];
+ __le32 phy_err_mask[2];
+ __le32 tsf_timestamp;
+ __le32 buf_len;
+ u8 buf[0];
+} __packed;
+
+#define PHYERR_TLV_SIG 0xBB
+#define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB
+#define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8
+#define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9
+
+struct phyerr_radar_report {
+ __le32 reg0; /* RADAR_REPORT_REG0_* */
+ __le32 reg1; /* RADAR_REPORT_REG1_* */
+} __packed;
+
+#define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000
+#define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31
+
+#define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000
+#define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30
+
+#define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000
+#define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20
+
+#define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000
+#define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16
+
+#define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00
+#define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10
+
+#define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF
+#define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0
+
+#define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000
+#define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31
+
+#define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000
+#define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24
+
+#define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000
+#define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16
+
+#define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00
+#define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8
+
+#define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF
+#define RADAR_REPORT_REG1_PULSE_DUR_LSB 0
+
+struct phyerr_fft_report {
+ __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */
+ __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */
+} __packed;
+
+#define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000
+#define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23
+
+#define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000
+#define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14
+
+#define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000
+#define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12
+
+#define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF
+#define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0
+
+#define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000
+#define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26
+
+#define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000
+#define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18
+
+#define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00
+#define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8
+
+#define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF
+#define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0
+
+struct phyerr_tlv {
+ __le16 len;
+ u8 tag;
+ u8 sig;
+} __packed;
+
+#define DFS_RSSI_POSSIBLY_FALSE 50
+#define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40
+
+struct wmi_mgmt_tx_hdr {
+ __le32 vdev_id;
+ struct wmi_mac_addr peer_macaddr;
+ __le32 tx_rate;
+ __le32 tx_power;
+ __le32 buf_len;
+} __packed;
+
+struct wmi_mgmt_tx_cmd {
+ struct wmi_mgmt_tx_hdr hdr;
+ u8 buf[0];
+} __packed;
+
+struct wmi_echo_event {
+ __le32 value;
+} __packed;
+
+struct wmi_echo_cmd {
+ __le32 value;
+} __packed;
+
+struct wmi_pdev_set_regdomain_cmd {
+ __le32 reg_domain;
+ __le32 reg_domain_2G;
+ __le32 reg_domain_5G;
+ __le32 conformance_test_limit_2G;
+ __le32 conformance_test_limit_5G;
+} __packed;
+
+enum wmi_dfs_region {
+ /* Uninitialized dfs domain */
+ WMI_UNINIT_DFS_DOMAIN = 0,
+
+ /* FCC3 dfs domain */
+ WMI_FCC_DFS_DOMAIN = 1,
+
+ /* ETSI dfs domain */
+ WMI_ETSI_DFS_DOMAIN = 2,
+
+ /*Japan dfs domain */
+ WMI_MKK4_DFS_DOMAIN = 3,
+};
+
+struct wmi_pdev_set_regdomain_cmd_10x {
+ __le32 reg_domain;
+ __le32 reg_domain_2G;
+ __le32 reg_domain_5G;
+ __le32 conformance_test_limit_2G;
+ __le32 conformance_test_limit_5G;
+
+ /* dfs domain from wmi_dfs_region */
+ __le32 dfs_domain;
+} __packed;
+
+/* Command to set/unset chip in quiet mode */
+struct wmi_pdev_set_quiet_cmd {
+ /* period in TUs */
+ __le32 period;
+
+ /* duration in TUs */
+ __le32 duration;
+
+ /* offset in TUs */
+ __le32 next_start;
+
+ /* enable/disable */
+ __le32 enabled;
+} __packed;
+
+/*
+ * 802.11g protection mode.
+ */
+enum ath10k_protmode {
+ ATH10K_PROT_NONE = 0, /* no protection */
+ ATH10K_PROT_CTSONLY = 1, /* CTS to self */
+ ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */
+};
+
+enum wmi_rtscts_profile {
+ WMI_RTSCTS_FOR_NO_RATESERIES = 0,
+ WMI_RTSCTS_FOR_SECOND_RATESERIES,
+ WMI_RTSCTS_ACROSS_SW_RETRIES
+};
+
+#define WMI_RTSCTS_ENABLED 1
+#define WMI_RTSCTS_SET_MASK 0x0f
+#define WMI_RTSCTS_SET_LSB 0
+
+#define WMI_RTSCTS_PROFILE_MASK 0xf0
+#define WMI_RTSCTS_PROFILE_LSB 4
+
+enum wmi_beacon_gen_mode {
+ WMI_BEACON_STAGGERED_MODE = 0,
+ WMI_BEACON_BURST_MODE = 1
+};
+
+enum wmi_csa_event_ies_present_flag {
+ WMI_CSA_IE_PRESENT = 0x00000001,
+ WMI_XCSA_IE_PRESENT = 0x00000002,
+ WMI_WBW_IE_PRESENT = 0x00000004,
+ WMI_CSWARP_IE_PRESENT = 0x00000008,
+};
+
+/* wmi CSA receive event from beacon frame */
+struct wmi_csa_event {
+ __le32 i_fc_dur;
+ /* Bit 0-15: FC */
+ /* Bit 16-31: DUR */
+ struct wmi_mac_addr i_addr1;
+ struct wmi_mac_addr i_addr2;
+ __le32 csa_ie[2];
+ __le32 xcsa_ie[2];
+ __le32 wb_ie[2];
+ __le32 cswarp_ie;
+ __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */
+} __packed;
+
+/* the definition of different PDEV parameters */
+#define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500
+#define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500
+#define PEER_DEFAULT_STATS_UPDATE_PERIOD 500
+
+struct wmi_pdev_param_map {
+ u32 tx_chain_mask;
+ u32 rx_chain_mask;
+ u32 txpower_limit2g;
+ u32 txpower_limit5g;
+ u32 txpower_scale;
+ u32 beacon_gen_mode;
+ u32 beacon_tx_mode;
+ u32 resmgr_offchan_mode;
+ u32 protection_mode;
+ u32 dynamic_bw;
+ u32 non_agg_sw_retry_th;
+ u32 agg_sw_retry_th;
+ u32 sta_kickout_th;
+ u32 ac_aggrsize_scaling;
+ u32 ltr_enable;
+ u32 ltr_ac_latency_be;
+ u32 ltr_ac_latency_bk;
+ u32 ltr_ac_latency_vi;
+ u32 ltr_ac_latency_vo;
+ u32 ltr_ac_latency_timeout;
+ u32 ltr_sleep_override;
+ u32 ltr_rx_override;
+ u32 ltr_tx_activity_timeout;
+ u32 l1ss_enable;
+ u32 dsleep_enable;
+ u32 pcielp_txbuf_flush;
+ u32 pcielp_txbuf_watermark;
+ u32 pcielp_txbuf_tmo_en;
+ u32 pcielp_txbuf_tmo_value;
+ u32 pdev_stats_update_period;
+ u32 vdev_stats_update_period;
+ u32 peer_stats_update_period;
+ u32 bcnflt_stats_update_period;
+ u32 pmf_qos;
+ u32 arp_ac_override;
+ u32 dcs;
+ u32 ani_enable;
+ u32 ani_poll_period;
+ u32 ani_listen_period;
+ u32 ani_ofdm_level;
+ u32 ani_cck_level;
+ u32 dyntxchain;
+ u32 proxy_sta;
+ u32 idle_ps_config;
+ u32 power_gating_sleep;
+ u32 fast_channel_reset;
+ u32 burst_dur;
+ u32 burst_enable;
+ u32 cal_period;
+ u32 aggr_burst;
+ u32 rx_decap_mode;
+ u32 smart_antenna_default_antenna;
+ u32 igmpmld_override;
+ u32 igmpmld_tid;
+ u32 antenna_gain;
+ u32 rx_filter;
+ u32 set_mcast_to_ucast_tid;
+ u32 proxy_sta_mode;
+ u32 set_mcast2ucast_mode;
+ u32 set_mcast2ucast_buffer;
+ u32 remove_mcast2ucast_buffer;
+ u32 peer_sta_ps_statechg_enable;
+ u32 igmpmld_ac_override;
+ u32 block_interbss;
+ u32 set_disable_reset_cmdid;
+ u32 set_msdu_ttl_cmdid;
+ u32 set_ppdu_duration_cmdid;
+ u32 txbf_sound_period_cmdid;
+ u32 set_promisc_mode_cmdid;
+ u32 set_burst_mode_cmdid;
+ u32 en_stats;
+ u32 mu_group_policy;
+ u32 noise_detection;
+ u32 noise_threshold;
+ u32 dpd_enable;
+ u32 set_mcast_bcast_echo;
+ u32 atf_strict_sch;
+ u32 atf_sched_duration;
+ u32 ant_plzn;
+ u32 mgmt_retry_limit;
+ u32 sensitivity_level;
+ u32 signed_txpower_2g;
+ u32 signed_txpower_5g;
+ u32 enable_per_tid_amsdu;
+ u32 enable_per_tid_ampdu;
+ u32 cca_threshold;
+ u32 rts_fixed_rate;
+ u32 pdev_reset;
+ u32 wapi_mbssid_offset;
+ u32 arp_srcaddr;
+ u32 arp_dstaddr;
+ u32 enable_btcoex;
+};
+
+#define WMI_PDEV_PARAM_UNSUPPORTED 0
+
+enum wmi_pdev_param {
+ /* TX chain mask */
+ WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
+ /* RX chain mask */
+ WMI_PDEV_PARAM_RX_CHAIN_MASK,
+ /* TX power limit for 2G Radio */
+ WMI_PDEV_PARAM_TXPOWER_LIMIT2G,
+ /* TX power limit for 5G Radio */
+ WMI_PDEV_PARAM_TXPOWER_LIMIT5G,
+ /* TX power scale */
+ WMI_PDEV_PARAM_TXPOWER_SCALE,
+ /* Beacon generation mode . 0: host, 1: target */
+ WMI_PDEV_PARAM_BEACON_GEN_MODE,
+ /* Beacon generation mode . 0: staggered 1: bursted */
+ WMI_PDEV_PARAM_BEACON_TX_MODE,
+ /*
+ * Resource manager off chan mode .
+ * 0: turn off off chan mode. 1: turn on offchan mode
+ */
+ WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
+ /*
+ * Protection mode:
+ * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
+ */
+ WMI_PDEV_PARAM_PROTECTION_MODE,
+ /*
+ * Dynamic bandwidth - 0: disable, 1: enable
+ *
+ * When enabled HW rate control tries different bandwidths when
+ * retransmitting frames.
+ */
+ WMI_PDEV_PARAM_DYNAMIC_BW,
+ /* Non aggregrate/ 11g sw retry threshold.0-disable */
+ WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
+ /* aggregrate sw retry threshold. 0-disable*/
+ WMI_PDEV_PARAM_AGG_SW_RETRY_TH,
+ /* Station kickout threshold (non of consecutive failures).0-disable */
+ WMI_PDEV_PARAM_STA_KICKOUT_TH,
+ /* Aggerate size scaling configuration per AC */
+ WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,
+ /* LTR enable */
+ WMI_PDEV_PARAM_LTR_ENABLE,
+ /* LTR latency for BE, in us */
+ WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,
+ /* LTR latency for BK, in us */
+ WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,
+ /* LTR latency for VI, in us */
+ WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,
+ /* LTR latency for VO, in us */
+ WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,
+ /* LTR AC latency timeout, in ms */
+ WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
+ /* LTR platform latency override, in us */
+ WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
+ /* LTR-RX override, in us */
+ WMI_PDEV_PARAM_LTR_RX_OVERRIDE,
+ /* Tx activity timeout for LTR, in us */
+ WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
+ /* L1SS state machine enable */
+ WMI_PDEV_PARAM_L1SS_ENABLE,
+ /* Deep sleep state machine enable */
+ WMI_PDEV_PARAM_DSLEEP_ENABLE,
+ /* RX buffering flush enable */
+ WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
+ /* RX buffering matermark */
+ WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
+ /* RX buffering timeout enable */
+ WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
+ /* RX buffering timeout value */
+ WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
+ /* pdev level stats update period in ms */
+ WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
+ /* vdev level stats update period in ms */
+ WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
+ /* peer level stats update period in ms */
+ WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
+ /* beacon filter status update period */
+ WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
+ /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
+ WMI_PDEV_PARAM_PMF_QOS,
+ /* Access category on which ARP frames are sent */
+ WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
+ /* DCS configuration */
+ WMI_PDEV_PARAM_DCS,
+ /* Enable/Disable ANI on target */
+ WMI_PDEV_PARAM_ANI_ENABLE,
+ /* configure the ANI polling period */
+ WMI_PDEV_PARAM_ANI_POLL_PERIOD,
+ /* configure the ANI listening period */
+ WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,
+ /* configure OFDM immunity level */
+ WMI_PDEV_PARAM_ANI_OFDM_LEVEL,
+ /* configure CCK immunity level */
+ WMI_PDEV_PARAM_ANI_CCK_LEVEL,
+ /* Enable/Disable CDD for 1x1 STAs in rate control module */
+ WMI_PDEV_PARAM_DYNTXCHAIN,
+ /* Enable/Disable proxy STA */
+ WMI_PDEV_PARAM_PROXY_STA,
+ /* Enable/Disable low power state when all VDEVs are inactive/idle. */
+ WMI_PDEV_PARAM_IDLE_PS_CONFIG,
+ /* Enable/Disable power gating sleep */
+ WMI_PDEV_PARAM_POWER_GATING_SLEEP,
+};
+
+enum wmi_10x_pdev_param {
+ /* TX chian mask */
+ WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
+ /* RX chian mask */
+ WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
+ /* TX power limit for 2G Radio */
+ WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
+ /* TX power limit for 5G Radio */
+ WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
+ /* TX power scale */
+ WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
+ /* Beacon generation mode . 0: host, 1: target */
+ WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
+ /* Beacon generation mode . 0: staggered 1: bursted */
+ WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
+ /*
+ * Resource manager off chan mode .
+ * 0: turn off off chan mode. 1: turn on offchan mode
+ */
+ WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
+ /*
+ * Protection mode:
+ * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
+ */
+ WMI_10X_PDEV_PARAM_PROTECTION_MODE,
+ /* Dynamic bandwidth 0: disable 1: enable */
+ WMI_10X_PDEV_PARAM_DYNAMIC_BW,
+ /* Non aggregrate/ 11g sw retry threshold.0-disable */
+ WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
+ /* aggregrate sw retry threshold. 0-disable*/
+ WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
+ /* Station kickout threshold (non of consecutive failures).0-disable */
+ WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
+ /* Aggerate size scaling configuration per AC */
+ WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
+ /* LTR enable */
+ WMI_10X_PDEV_PARAM_LTR_ENABLE,
+ /* LTR latency for BE, in us */
+ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
+ /* LTR latency for BK, in us */
+ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
+ /* LTR latency for VI, in us */
+ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
+ /* LTR latency for VO, in us */
+ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
+ /* LTR AC latency timeout, in ms */
+ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
+ /* LTR platform latency override, in us */
+ WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
+ /* LTR-RX override, in us */
+ WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
+ /* Tx activity timeout for LTR, in us */
+ WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
+ /* L1SS state machine enable */
+ WMI_10X_PDEV_PARAM_L1SS_ENABLE,
+ /* Deep sleep state machine enable */
+ WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
+ /* pdev level stats update period in ms */
+ WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
+ /* vdev level stats update period in ms */
+ WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
+ /* peer level stats update period in ms */
+ WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
+ /* beacon filter status update period */
+ WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
+ /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
+ WMI_10X_PDEV_PARAM_PMF_QOS,
+ /* Access category on which ARP and DHCP frames are sent */
+ WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
+ /* DCS configuration */
+ WMI_10X_PDEV_PARAM_DCS,
+ /* Enable/Disable ANI on target */
+ WMI_10X_PDEV_PARAM_ANI_ENABLE,
+ /* configure the ANI polling period */
+ WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
+ /* configure the ANI listening period */
+ WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
+ /* configure OFDM immunity level */
+ WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
+ /* configure CCK immunity level */
+ WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
+ /* Enable/Disable CDD for 1x1 STAs in rate control module */
+ WMI_10X_PDEV_PARAM_DYNTXCHAIN,
+ /* Enable/Disable Fast channel reset*/
+ WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
+ /* Set Bursting DUR */
+ WMI_10X_PDEV_PARAM_BURST_DUR,
+ /* Set Bursting Enable*/
+ WMI_10X_PDEV_PARAM_BURST_ENABLE,
+
+ /* following are available as of firmware 10.2 */
+ WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
+ WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE,
+ WMI_10X_PDEV_PARAM_IGMPMLD_TID,
+ WMI_10X_PDEV_PARAM_ANTENNA_GAIN,
+ WMI_10X_PDEV_PARAM_RX_DECAP_MODE,
+ WMI_10X_PDEV_PARAM_RX_FILTER,
+ WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID,
+ WMI_10X_PDEV_PARAM_PROXY_STA_MODE,
+ WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE,
+ WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
+ WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
+ WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE,
+ WMI_10X_PDEV_PARAM_RTS_FIXED_RATE,
+ WMI_10X_PDEV_PARAM_CAL_PERIOD
+};
+
+enum wmi_10_4_pdev_param {
+ WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
+ WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK,
+ WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G,
+ WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G,
+ WMI_10_4_PDEV_PARAM_TXPOWER_SCALE,
+ WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE,
+ WMI_10_4_PDEV_PARAM_BEACON_TX_MODE,
+ WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
+ WMI_10_4_PDEV_PARAM_PROTECTION_MODE,
+ WMI_10_4_PDEV_PARAM_DYNAMIC_BW,
+ WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
+ WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH,
+ WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH,
+ WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING,
+ WMI_10_4_PDEV_PARAM_LTR_ENABLE,
+ WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE,
+ WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK,
+ WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI,
+ WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO,
+ WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
+ WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
+ WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE,
+ WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
+ WMI_10_4_PDEV_PARAM_L1SS_ENABLE,
+ WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE,
+ WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
+ WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
+ WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
+ WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
+ WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
+ WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
+ WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
+ WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
+ WMI_10_4_PDEV_PARAM_PMF_QOS,
+ WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE,
+ WMI_10_4_PDEV_PARAM_DCS,
+ WMI_10_4_PDEV_PARAM_ANI_ENABLE,
+ WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD,
+ WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD,
+ WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL,
+ WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL,
+ WMI_10_4_PDEV_PARAM_DYNTXCHAIN,
+ WMI_10_4_PDEV_PARAM_PROXY_STA,
+ WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG,
+ WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP,
+ WMI_10_4_PDEV_PARAM_AGGR_BURST,
+ WMI_10_4_PDEV_PARAM_RX_DECAP_MODE,
+ WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET,
+ WMI_10_4_PDEV_PARAM_BURST_DUR,
+ WMI_10_4_PDEV_PARAM_BURST_ENABLE,
+ WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
+ WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE,
+ WMI_10_4_PDEV_PARAM_IGMPMLD_TID,
+ WMI_10_4_PDEV_PARAM_ANTENNA_GAIN,
+ WMI_10_4_PDEV_PARAM_RX_FILTER,
+ WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID,
+ WMI_10_4_PDEV_PARAM_PROXY_STA_MODE,
+ WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE,
+ WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
+ WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
+ WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE,
+ WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE,
+ WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS,
+ WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID,
+ WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID,
+ WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID,
+ WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID,
+ WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
+ WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID,
+ WMI_10_4_PDEV_PARAM_EN_STATS,
+ WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY,
+ WMI_10_4_PDEV_PARAM_NOISE_DETECTION,
+ WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD,
+ WMI_10_4_PDEV_PARAM_DPD_ENABLE,
+ WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO,
+ WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH,
+ WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION,
+ WMI_10_4_PDEV_PARAM_ANT_PLZN,
+ WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT,
+ WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL,
+ WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G,
+ WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G,
+ WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU,
+ WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU,
+ WMI_10_4_PDEV_PARAM_CCA_THRESHOLD,
+ WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE,
+ WMI_10_4_PDEV_PARAM_CAL_PERIOD,
+ WMI_10_4_PDEV_PARAM_PDEV_RESET,
+ WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET,
+ WMI_10_4_PDEV_PARAM_ARP_SRCADDR,
+ WMI_10_4_PDEV_PARAM_ARP_DSTADDR,
+ WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB,
+ WMI_10_4_PDEV_PARAM_RX_BATCHMODE,
+ WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY,
+ WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH,
+ WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR,
+ WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE,
+ WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE,
+ WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY,
+ WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX,
+};
+
+struct wmi_pdev_set_param_cmd {
+ __le32 param_id;
+ __le32 param_value;
+} __packed;
+
+/* valid period is 1 ~ 60000ms, unit in millisecond */
+#define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000
+
+struct wmi_pdev_get_tpc_config_cmd {
+ /* parameter */
+ __le32 param;
+} __packed;
+
+#define WMI_TPC_CONFIG_PARAM 1
+#define WMI_TPC_RATE_MAX 160
+#define WMI_TPC_TX_N_CHAIN 4
+#define WMI_TPC_PREAM_TABLE_MAX 10
+#define WMI_TPC_FLAG 3
+#define WMI_TPC_BUF_SIZE 10
+
+enum wmi_tpc_table_type {
+ WMI_TPC_TABLE_TYPE_CDD = 0,
+ WMI_TPC_TABLE_TYPE_STBC = 1,
+ WMI_TPC_TABLE_TYPE_TXBF = 2,
+};
+
+enum wmi_tpc_config_event_flag {
+ WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1,
+ WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2,
+ WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4,
+};
+
+struct wmi_pdev_tpc_config_event {
+ __le32 reg_domain;
+ __le32 chan_freq;
+ __le32 phy_mode;
+ __le32 twice_antenna_reduction;
+ __le32 twice_max_rd_power;
+ a_sle32 twice_antenna_gain;
+ __le32 power_limit;
+ __le32 rate_max;
+ __le32 num_tx_chain;
+ __le32 ctl;
+ __le32 flags;
+ s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
+ s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
+ s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
+ s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
+ u8 rates_array[WMI_TPC_RATE_MAX];
+} __packed;
+
+/* Transmit power scale factor. */
+enum wmi_tp_scale {
+ WMI_TP_SCALE_MAX = 0, /* no scaling (default) */
+ WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */
+ WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */
+ WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */
+ WMI_TP_SCALE_MIN = 4, /* min, but still on */
+ WMI_TP_SCALE_SIZE = 5, /* max num of enum */
+};
+
+struct wmi_pdev_chanlist_update_event {
+ /* number of channels */
+ __le32 num_chan;
+ /* array of channels */
+ struct wmi_channel channel_list[1];
+} __packed;
+
+#define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32)
+
+struct wmi_debug_mesg_event {
+ /* message buffer, NULL terminated */
+ char bufp[WMI_MAX_DEBUG_MESG];
+} __packed;
+
+enum {
+ /* P2P device */
+ VDEV_SUBTYPE_P2PDEV = 0,
+ /* P2P client */
+ VDEV_SUBTYPE_P2PCLI,
+ /* P2P GO */
+ VDEV_SUBTYPE_P2PGO,
+ /* BT3.0 HS */
+ VDEV_SUBTYPE_BT,
+};
+
+struct wmi_pdev_set_channel_cmd {
+ /* idnore power , only use flags , mode and freq */
+ struct wmi_channel chan;
+} __packed;
+
+struct wmi_pdev_pktlog_enable_cmd {
+ __le32 ev_bitmap;
+} __packed;
+
+/* Customize the DSCP (bit) to TID (0-7) mapping for QOS */
+#define WMI_DSCP_MAP_MAX (64)
+struct wmi_pdev_set_dscp_tid_map_cmd {
+ /* map indicating DSCP to TID conversion */
+ __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX];
+} __packed;
+
+enum mcast_bcast_rate_id {
+ WMI_SET_MCAST_RATE,
+ WMI_SET_BCAST_RATE
+};
+
+struct mcast_bcast_rate {
+ enum mcast_bcast_rate_id rate_id;
+ __le32 rate;
+} __packed;
+
+struct wmi_wmm_params {
+ __le32 cwmin;
+ __le32 cwmax;
+ __le32 aifs;
+ __le32 txop;
+ __le32 acm;
+ __le32 no_ack;
+} __packed;
+
+struct wmi_pdev_set_wmm_params {
+ struct wmi_wmm_params ac_be;
+ struct wmi_wmm_params ac_bk;
+ struct wmi_wmm_params ac_vi;
+ struct wmi_wmm_params ac_vo;
+} __packed;
+
+struct wmi_wmm_params_arg {
+ u32 cwmin;
+ u32 cwmax;
+ u32 aifs;
+ u32 txop;
+ u32 acm;
+ u32 no_ack;
+};
+
+struct wmi_wmm_params_all_arg {
+ struct wmi_wmm_params_arg ac_be;
+ struct wmi_wmm_params_arg ac_bk;
+ struct wmi_wmm_params_arg ac_vi;
+ struct wmi_wmm_params_arg ac_vo;
+};
+
+struct wmi_pdev_stats_tx {
+ /* Num HTT cookies queued to dispatch list */
+ __le32 comp_queued;
+
+ /* Num HTT cookies dispatched */
+ __le32 comp_delivered;
+
+ /* Num MSDU queued to WAL */
+ __le32 msdu_enqued;
+
+ /* Num MPDU queue to WAL */
+ __le32 mpdu_enqued;
+
+ /* Num MSDUs dropped by WMM limit */
+ __le32 wmm_drop;
+
+ /* Num Local frames queued */
+ __le32 local_enqued;
+
+ /* Num Local frames done */
+ __le32 local_freed;
+
+ /* Num queued to HW */
+ __le32 hw_queued;
+
+ /* Num PPDU reaped from HW */
+ __le32 hw_reaped;
+
+ /* Num underruns */
+ __le32 underrun;
+
+ /* Num PPDUs cleaned up in TX abort */
+ __le32 tx_abort;
+
+ /* Num MPDUs requed by SW */
+ __le32 mpdus_requed;
+
+ /* excessive retries */
+ __le32 tx_ko;
+
+ /* data hw rate code */
+ __le32 data_rc;
+
+ /* Scheduler self triggers */
+ __le32 self_triggers;
+
+ /* frames dropped due to excessive sw retries */
+ __le32 sw_retry_failure;
+
+ /* illegal rate phy errors */
+ __le32 illgl_rate_phy_err;
+
+ /* wal pdev continuous xretry */
+ __le32 pdev_cont_xretry;
+
+ /* wal pdev continous xretry */
+ __le32 pdev_tx_timeout;
+
+ /* wal pdev resets */
+ __le32 pdev_resets;
+
+ /* frames dropped due to non-availability of stateless TIDs */
+ __le32 stateless_tid_alloc_failure;
+
+ __le32 phy_underrun;
+
+ /* MPDU is more than txop limit */
+ __le32 txop_ovf;
+} __packed;
+
+struct wmi_10_4_pdev_stats_tx {
+ /* Num HTT cookies queued to dispatch list */
+ __le32 comp_queued;
+
+ /* Num HTT cookies dispatched */
+ __le32 comp_delivered;
+
+ /* Num MSDU queued to WAL */
+ __le32 msdu_enqued;
+
+ /* Num MPDU queue to WAL */
+ __le32 mpdu_enqued;
+
+ /* Num MSDUs dropped by WMM limit */
+ __le32 wmm_drop;
+
+ /* Num Local frames queued */
+ __le32 local_enqued;
+
+ /* Num Local frames done */
+ __le32 local_freed;
+
+ /* Num queued to HW */
+ __le32 hw_queued;
+
+ /* Num PPDU reaped from HW */
+ __le32 hw_reaped;
+
+ /* Num underruns */
+ __le32 underrun;
+
+ /* HW Paused. */
+ __le32 hw_paused;
+
+ /* Num PPDUs cleaned up in TX abort */
+ __le32 tx_abort;
+
+ /* Num MPDUs requed by SW */
+ __le32 mpdus_requed;
+
+ /* excessive retries */
+ __le32 tx_ko;
+
+ /* data hw rate code */
+ __le32 data_rc;
+
+ /* Scheduler self triggers */
+ __le32 self_triggers;
+
+ /* frames dropped due to excessive sw retries */
+ __le32 sw_retry_failure;
+
+ /* illegal rate phy errors */
+ __le32 illgl_rate_phy_err;
+
+ /* wal pdev continuous xretry */
+ __le32 pdev_cont_xretry;
+
+ /* wal pdev tx timeouts */
+ __le32 pdev_tx_timeout;
+
+ /* wal pdev resets */
+ __le32 pdev_resets;
+
+ /* frames dropped due to non-availability of stateless TIDs */
+ __le32 stateless_tid_alloc_failure;
+
+ __le32 phy_underrun;
+
+ /* MPDU is more than txop limit */
+ __le32 txop_ovf;
+
+ /* Number of Sequences posted */
+ __le32 seq_posted;
+
+ /* Number of Sequences failed queueing */
+ __le32 seq_failed_queueing;
+
+ /* Number of Sequences completed */
+ __le32 seq_completed;
+
+ /* Number of Sequences restarted */
+ __le32 seq_restarted;
+
+ /* Number of MU Sequences posted */
+ __le32 mu_seq_posted;
+
+ /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */
+ __le32 mpdus_sw_flush;
+
+ /* Num MPDUs filtered by HW, all filter condition (TTL expired) */
+ __le32 mpdus_hw_filter;
+
+ /* Num MPDUs truncated by PDG
+ * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw)
+ */
+ __le32 mpdus_truncated;
+
+ /* Num MPDUs that was tried but didn't receive ACK or BA */
+ __le32 mpdus_ack_failed;
+
+ /* Num MPDUs that was dropped due to expiry. */
+ __le32 mpdus_expired;
+} __packed;
+
+struct wmi_pdev_stats_rx {
+ /* Cnts any change in ring routing mid-ppdu */
+ __le32 mid_ppdu_route_change;
+
+ /* Total number of statuses processed */
+ __le32 status_rcvd;
+
+ /* Extra frags on rings 0-3 */
+ __le32 r0_frags;
+ __le32 r1_frags;
+ __le32 r2_frags;
+ __le32 r3_frags;
+
+ /* MSDUs / MPDUs delivered to HTT */
+ __le32 htt_msdus;
+ __le32 htt_mpdus;
+
+ /* MSDUs / MPDUs delivered to local stack */
+ __le32 loc_msdus;
+ __le32 loc_mpdus;
+
+ /* AMSDUs that have more MSDUs than the status ring size */
+ __le32 oversize_amsdu;
+
+ /* Number of PHY errors */
+ __le32 phy_errs;
+
+ /* Number of PHY errors drops */
+ __le32 phy_err_drop;
+
+ /* Number of mpdu errors - FCS, MIC, ENC etc. */
+ __le32 mpdu_errs;
+} __packed;
+
+struct wmi_pdev_stats_peer {
+ /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */
+ __le32 dummy;
+} __packed;
+
+enum wmi_stats_id {
+ WMI_STAT_PEER = BIT(0),
+ WMI_STAT_AP = BIT(1),
+ WMI_STAT_PDEV = BIT(2),
+ WMI_STAT_VDEV = BIT(3),
+ WMI_STAT_BCNFLT = BIT(4),
+ WMI_STAT_VDEV_RATE = BIT(5),
+};
+
+enum wmi_10_4_stats_id {
+ WMI_10_4_STAT_PEER = BIT(0),
+ WMI_10_4_STAT_AP = BIT(1),
+ WMI_10_4_STAT_INST = BIT(2),
+ WMI_10_4_STAT_PEER_EXTD = BIT(3),
+};
+
+struct wlan_inst_rssi_args {
+ __le16 cfg_retry_count;
+ __le16 retry_count;
+};
+
+struct wmi_request_stats_cmd {
+ __le32 stats_id;
+
+ __le32 vdev_id;
+
+ /* peer MAC address */
+ struct wmi_mac_addr peer_macaddr;
+
+ /* Instantaneous RSSI arguments */
+ struct wlan_inst_rssi_args inst_rssi_args;
+} __packed;
+
+/* Suspend option */
+enum {
+ /* suspend */
+ WMI_PDEV_SUSPEND,
+
+ /* suspend and disable all interrupts */
+ WMI_PDEV_SUSPEND_AND_DISABLE_INTR,
+};
+
+struct wmi_pdev_suspend_cmd {
+ /* suspend option sent to target */
+ __le32 suspend_opt;
+} __packed;
+
+struct wmi_stats_event {
+ __le32 stats_id; /* WMI_STAT_ */
+ /*
+ * number of pdev stats event structures
+ * (wmi_pdev_stats) 0 or 1
+ */
+ __le32 num_pdev_stats;
+ /*
+ * number of vdev stats event structures
+ * (wmi_vdev_stats) 0 or max vdevs
+ */
+ __le32 num_vdev_stats;
+ /*
+ * number of peer stats event structures
+ * (wmi_peer_stats) 0 or max peers
+ */
+ __le32 num_peer_stats;
+ __le32 num_bcnflt_stats;
+ /*
+ * followed by
+ * num_pdev_stats * size of(struct wmi_pdev_stats)
+ * num_vdev_stats * size of(struct wmi_vdev_stats)
+ * num_peer_stats * size of(struct wmi_peer_stats)
+ *
+ * By having a zero sized array, the pointer to data area
+ * becomes available without increasing the struct size
+ */
+ u8 data[0];
+} __packed;
+
+struct wmi_10_2_stats_event {
+ __le32 stats_id; /* %WMI_REQUEST_ */
+ __le32 num_pdev_stats;
+ __le32 num_pdev_ext_stats;
+ __le32 num_vdev_stats;
+ __le32 num_peer_stats;
+ __le32 num_bcnflt_stats;
+ u8 data[0];
+} __packed;
+
+/*
+ * PDEV statistics
+ * TODO: add all PDEV stats here
+ */
+struct wmi_pdev_stats_base {
+ __le32 chan_nf;
+ __le32 tx_frame_count; /* Cycles spent transmitting frames */
+ __le32 rx_frame_count; /* Cycles spent receiving frames */
+ __le32 rx_clear_count; /* Total channel busy time, evidently */
+ __le32 cycle_count; /* Total on-channel time */
+ __le32 phy_err_count;
+ __le32 chan_tx_pwr;
+} __packed;
+
+struct wmi_pdev_stats {
+ struct wmi_pdev_stats_base base;
+ struct wmi_pdev_stats_tx tx;
+ struct wmi_pdev_stats_rx rx;
+ struct wmi_pdev_stats_peer peer;
+} __packed;
+
+struct wmi_pdev_stats_extra {
+ __le32 ack_rx_bad;
+ __le32 rts_bad;
+ __le32 rts_good;
+ __le32 fcs_bad;
+ __le32 no_beacons;
+ __le32 mib_int_count;
+} __packed;
+
+struct wmi_10x_pdev_stats {
+ struct wmi_pdev_stats_base base;
+ struct wmi_pdev_stats_tx tx;
+ struct wmi_pdev_stats_rx rx;
+ struct wmi_pdev_stats_peer peer;
+ struct wmi_pdev_stats_extra extra;
+} __packed;
+
+struct wmi_pdev_stats_mem {
+ __le32 dram_free;
+ __le32 iram_free;
+} __packed;
+
+struct wmi_10_2_pdev_stats {
+ struct wmi_pdev_stats_base base;
+ struct wmi_pdev_stats_tx tx;
+ __le32 mc_drop;
+ struct wmi_pdev_stats_rx rx;
+ __le32 pdev_rx_timeout;
+ struct wmi_pdev_stats_mem mem;
+ struct wmi_pdev_stats_peer peer;
+ struct wmi_pdev_stats_extra extra;
+} __packed;
+
+struct wmi_10_4_pdev_stats {
+ struct wmi_pdev_stats_base base;
+ struct wmi_10_4_pdev_stats_tx tx;
+ struct wmi_pdev_stats_rx rx;
+ __le32 rx_ovfl_errs;
+ struct wmi_pdev_stats_mem mem;
+ __le32 sram_free_size;
+ struct wmi_pdev_stats_extra extra;
+} __packed;
+
+/*
+ * VDEV statistics
+ * TODO: add all VDEV stats here
+ */
+struct wmi_vdev_stats {
+ __le32 vdev_id;
+} __packed;
+
+/*
+ * peer statistics.
+ * TODO: add more stats
+ */
+struct wmi_peer_stats {
+ struct wmi_mac_addr peer_macaddr;
+ __le32 peer_rssi;
+ __le32 peer_tx_rate;
+} __packed;
+
+struct wmi_10x_peer_stats {
+ struct wmi_peer_stats old;
+ __le32 peer_rx_rate;
+} __packed;
+
+struct wmi_10_2_peer_stats {
+ struct wmi_peer_stats old;
+ __le32 peer_rx_rate;
+ __le32 current_per;
+ __le32 retries;
+ __le32 tx_rate_count;
+ __le32 max_4ms_frame_len;
+ __le32 total_sub_frames;
+ __le32 tx_bytes;
+ __le32 num_pkt_loss_overflow[4];
+ __le32 num_pkt_loss_excess_retry[4];
+} __packed;
+
+struct wmi_10_2_4_peer_stats {
+ struct wmi_10_2_peer_stats common;
+ __le32 peer_rssi_changed;
+} __packed;
+
+struct wmi_10_2_4_ext_peer_stats {
+ struct wmi_10_2_peer_stats common;
+ __le32 peer_rssi_changed;
+ __le32 rx_duration;
+} __packed;
+
+struct wmi_10_4_peer_stats {
+ struct wmi_mac_addr peer_macaddr;
+ __le32 peer_rssi;
+ __le32 peer_rssi_seq_num;
+ __le32 peer_tx_rate;
+ __le32 peer_rx_rate;
+ __le32 current_per;
+ __le32 retries;
+ __le32 tx_rate_count;
+ __le32 max_4ms_frame_len;
+ __le32 total_sub_frames;
+ __le32 tx_bytes;
+ __le32 num_pkt_loss_overflow[4];
+ __le32 num_pkt_loss_excess_retry[4];
+ __le32 peer_rssi_changed;
+} __packed;
+
+struct wmi_10_4_peer_extd_stats {
+ struct wmi_mac_addr peer_macaddr;
+ __le32 inactive_time;
+ __le32 peer_chain_rssi;
+ __le32 rx_duration;
+ __le32 reserved[10];
+} __packed;
+
+struct wmi_10_4_bss_bcn_stats {
+ __le32 vdev_id;
+ __le32 bss_bcns_dropped;
+ __le32 bss_bcn_delivered;
+} __packed;
+
+struct wmi_10_4_bss_bcn_filter_stats {
+ __le32 bcns_dropped;
+ __le32 bcns_delivered;
+ __le32 active_filters;
+ struct wmi_10_4_bss_bcn_stats bss_stats;
+} __packed;
+
+struct wmi_10_2_pdev_ext_stats {
+ __le32 rx_rssi_comb;
+ __le32 rx_rssi[4];
+ __le32 rx_mcs[10];
+ __le32 tx_mcs[10];
+ __le32 ack_rssi;
+} __packed;
+
+struct wmi_vdev_create_cmd {
+ __le32 vdev_id;
+ __le32 vdev_type;
+ __le32 vdev_subtype;
+ struct wmi_mac_addr vdev_macaddr;
+} __packed;
+
+enum wmi_vdev_type {
+ WMI_VDEV_TYPE_AP = 1,
+ WMI_VDEV_TYPE_STA = 2,
+ WMI_VDEV_TYPE_IBSS = 3,
+ WMI_VDEV_TYPE_MONITOR = 4,
+};
+
+enum wmi_vdev_subtype {
+ WMI_VDEV_SUBTYPE_NONE,
+ WMI_VDEV_SUBTYPE_P2P_DEVICE,
+ WMI_VDEV_SUBTYPE_P2P_CLIENT,
+ WMI_VDEV_SUBTYPE_P2P_GO,
+ WMI_VDEV_SUBTYPE_PROXY_STA,
+ WMI_VDEV_SUBTYPE_MESH_11S,
+ WMI_VDEV_SUBTYPE_MESH_NON_11S,
+};
+
+enum wmi_vdev_subtype_legacy {
+ WMI_VDEV_SUBTYPE_LEGACY_NONE = 0,
+ WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1,
+ WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2,
+ WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3,
+ WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4,
+};
+
+enum wmi_vdev_subtype_10_2_4 {
+ WMI_VDEV_SUBTYPE_10_2_4_NONE = 0,
+ WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1,
+ WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2,
+ WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3,
+ WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4,
+ WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5,
+};
+
+enum wmi_vdev_subtype_10_4 {
+ WMI_VDEV_SUBTYPE_10_4_NONE = 0,
+ WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1,
+ WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2,
+ WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3,
+ WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4,
+ WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5,
+ WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6,
+};
+
+/* values for vdev_subtype */
+
+/* values for vdev_start_request flags */
+/*
+ * Indicates that AP VDEV uses hidden ssid. only valid for
+ * AP/GO
+ */
+#define WMI_VDEV_START_HIDDEN_SSID (1 << 0)
+/*
+ * Indicates if robust management frame/management frame
+ * protection is enabled. For GO/AP vdevs, it indicates that
+ * it may support station/client associations with RMF enabled.
+ * For STA/client vdevs, it indicates that sta will
+ * associate with AP with RMF enabled.
+ */
+#define WMI_VDEV_START_PMF_ENABLED (1 << 1)
+
+struct wmi_p2p_noa_descriptor {
+ __le32 type_count; /* 255: continuous schedule, 0: reserved */
+ __le32 duration; /* Absent period duration in micro seconds */
+ __le32 interval; /* Absent period interval in micro seconds */
+ __le32 start_time; /* 32 bit tsf time when in starts */
+} __packed;
+
+struct wmi_vdev_start_request_cmd {
+ /* WMI channel */
+ struct wmi_channel chan;
+ /* unique id identifying the VDEV, generated by the caller */
+ __le32 vdev_id;
+ /* requestor id identifying the caller module */
+ __le32 requestor_id;
+ /* beacon interval from received beacon */
+ __le32 beacon_interval;
+ /* DTIM Period from the received beacon */
+ __le32 dtim_period;
+ /* Flags */
+ __le32 flags;
+ /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */
+ struct wmi_ssid ssid;
+ /* beacon/probe response xmit rate. Applicable for SoftAP. */
+ __le32 bcn_tx_rate;
+ /* beacon/probe response xmit power. Applicable for SoftAP. */
+ __le32 bcn_tx_power;
+ /* number of p2p NOA descriptor(s) from scan entry */
+ __le32 num_noa_descriptors;
+ /*
+ * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID.
+ * During CAC, Our HW shouldn't ack ditected frames
+ */
+ __le32 disable_hw_ack;
+ /* actual p2p NOA descriptor from scan entry */
+ struct wmi_p2p_noa_descriptor noa_descriptors[2];
+} __packed;
+
+struct wmi_vdev_restart_request_cmd {
+ struct wmi_vdev_start_request_cmd vdev_start_request_cmd;
+} __packed;
+
+struct wmi_vdev_start_request_arg {
+ u32 vdev_id;
+ struct wmi_channel_arg channel;
+ u32 bcn_intval;
+ u32 dtim_period;
+ u8 *ssid;
+ u32 ssid_len;
+ u32 bcn_tx_rate;
+ u32 bcn_tx_power;
+ bool disable_hw_ack;
+ bool hidden_ssid;
+ bool pmf_enabled;
+};
+
+struct wmi_vdev_delete_cmd {
+ /* unique id identifying the VDEV, generated by the caller */
+ __le32 vdev_id;
+} __packed;
+
+struct wmi_vdev_up_cmd {
+ __le32 vdev_id;
+ __le32 vdev_assoc_id;
+ struct wmi_mac_addr vdev_bssid;
+} __packed;
+
+struct wmi_vdev_stop_cmd {
+ __le32 vdev_id;
+} __packed;
+
+struct wmi_vdev_down_cmd {
+ __le32 vdev_id;
+} __packed;
+
+struct wmi_vdev_standby_response_cmd {
+ /* unique id identifying the VDEV, generated by the caller */
+ __le32 vdev_id;
+} __packed;
+
+struct wmi_vdev_resume_response_cmd {
+ /* unique id identifying the VDEV, generated by the caller */
+ __le32 vdev_id;
+} __packed;
+
+struct wmi_vdev_set_param_cmd {
+ __le32 vdev_id;
+ __le32 param_id;
+ __le32 param_value;
+} __packed;
+
+#define WMI_MAX_KEY_INDEX 3
+#define WMI_MAX_KEY_LEN 32
+
+#define WMI_KEY_PAIRWISE 0x00
+#define WMI_KEY_GROUP 0x01
+#define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */
+
+struct wmi_key_seq_counter {
+ __le32 key_seq_counter_l;
+ __le32 key_seq_counter_h;
+} __packed;
+
+#define WMI_CIPHER_NONE 0x0 /* clear key */
+#define WMI_CIPHER_WEP 0x1
+#define WMI_CIPHER_TKIP 0x2
+#define WMI_CIPHER_AES_OCB 0x3
+#define WMI_CIPHER_AES_CCM 0x4
+#define WMI_CIPHER_WAPI 0x5
+#define WMI_CIPHER_CKIP 0x6
+#define WMI_CIPHER_AES_CMAC 0x7
+
+struct wmi_vdev_install_key_cmd {
+ __le32 vdev_id;
+ struct wmi_mac_addr peer_macaddr;
+ __le32 key_idx;
+ __le32 key_flags;
+ __le32 key_cipher; /* %WMI_CIPHER_ */
+ struct wmi_key_seq_counter key_rsc_counter;
+ struct wmi_key_seq_counter key_global_rsc_counter;
+ struct wmi_key_seq_counter key_tsc_counter;
+ u8 wpi_key_rsc_counter[16];
+ u8 wpi_key_tsc_counter[16];
+ __le32 key_len;
+ __le32 key_txmic_len;
+ __le32 key_rxmic_len;
+
+ /* contains key followed by tx mic followed by rx mic */
+ u8 key_data[0];
+} __packed;
+
+struct wmi_vdev_install_key_arg {
+ u32 vdev_id;
+ const u8 *macaddr;
+ u32 key_idx;
+ u32 key_flags;
+ u32 key_cipher;
+ u32 key_len;
+ u32 key_txmic_len;
+ u32 key_rxmic_len;
+ const void *key_data;
+};
+
+/*
+ * vdev fixed rate format:
+ * - preamble - b7:b6 - see WMI_RATE_PREMABLE_
+ * - nss - b5:b4 - ss number (0 mean 1ss)
+ * - rate_mcs - b3:b0 - as below
+ * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps,
+ * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s)
+ * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps,
+ * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps
+ * HT/VHT: MCS index
+ */
+
+/* Preamble types to be used with VDEV fixed rate configuration */
+enum wmi_rate_preamble {
+ WMI_RATE_PREAMBLE_OFDM,
+ WMI_RATE_PREAMBLE_CCK,
+ WMI_RATE_PREAMBLE_HT,
+ WMI_RATE_PREAMBLE_VHT,
+};
+
+#define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3))
+#define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3)
+#define ATH10K_HW_MCS_RATE(rate) ((rate) & 0xf)
+#define ATH10K_HW_LEGACY_RATE(rate) ((rate) & 0x3f)
+#define ATH10K_HW_BW(flags) (((flags) >> 3) & 0x3)
+#define ATH10K_HW_GI(flags) (((flags) >> 5) & 0x1)
+#define ATH10K_HW_RATECODE(rate, nss, preamble) \
+ (((preamble) << 6) | ((nss) << 4) | (rate))
+
+#define VHT_MCS_NUM 10
+#define VHT_BW_NUM 4
+#define VHT_NSS_NUM 4
+
+/* Value to disable fixed rate setting */
+#define WMI_FIXED_RATE_NONE (0xff)
+
+struct wmi_vdev_param_map {
+ u32 rts_threshold;
+ u32 fragmentation_threshold;
+ u32 beacon_interval;
+ u32 listen_interval;
+ u32 multicast_rate;
+ u32 mgmt_tx_rate;
+ u32 slot_time;
+ u32 preamble;
+ u32 swba_time;
+ u32 wmi_vdev_stats_update_period;
+ u32 wmi_vdev_pwrsave_ageout_time;
+ u32 wmi_vdev_host_swba_interval;
+ u32 dtim_period;
+ u32 wmi_vdev_oc_scheduler_air_time_limit;
+ u32 wds;
+ u32 atim_window;
+ u32 bmiss_count_max;
+ u32 bmiss_first_bcnt;
+ u32 bmiss_final_bcnt;
+ u32 feature_wmm;
+ u32 chwidth;
+ u32 chextoffset;
+ u32 disable_htprotection;
+ u32 sta_quickkickout;
+ u32 mgmt_rate;
+ u32 protection_mode;
+ u32 fixed_rate;
+ u32 sgi;
+ u32 ldpc;
+ u32 tx_stbc;
+ u32 rx_stbc;
+ u32 intra_bss_fwd;
+ u32 def_keyid;
+ u32 nss;
+ u32 bcast_data_rate;
+ u32 mcast_data_rate;
+ u32 mcast_indicate;
+ u32 dhcp_indicate;
+ u32 unknown_dest_indicate;
+ u32 ap_keepalive_min_idle_inactive_time_secs;
+ u32 ap_keepalive_max_idle_inactive_time_secs;
+ u32 ap_keepalive_max_unresponsive_time_secs;
+ u32 ap_enable_nawds;
+ u32 mcast2ucast_set;
+ u32 enable_rtscts;
+ u32 txbf;
+ u32 packet_powersave;
+ u32 drop_unencry;
+ u32 tx_encap_type;
+ u32 ap_detect_out_of_sync_sleeping_sta_time_secs;
+ u32 rc_num_retries;
+ u32 cabq_maxdur;
+ u32 mfptest_set;
+ u32 rts_fixed_rate;
+ u32 vht_sgimask;
+ u32 vht80_ratemask;
+ u32 early_rx_adjust_enable;
+ u32 early_rx_tgt_bmiss_num;
+ u32 early_rx_bmiss_sample_cycle;
+ u32 early_rx_slop_step;
+ u32 early_rx_init_slop;
+ u32 early_rx_adjust_pause;
+ u32 proxy_sta;
+ u32 meru_vc;
+ u32 rx_decap_type;
+ u32 bw_nss_ratemask;
+ u32 inc_tsf;
+ u32 dec_tsf;
+};
+
+#define WMI_VDEV_PARAM_UNSUPPORTED 0
+
+/* the definition of different VDEV parameters */
+enum wmi_vdev_param {
+ /* RTS Threshold */
+ WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1,
+ /* Fragmentation threshold */
+ WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
+ /* beacon interval in TUs */
+ WMI_VDEV_PARAM_BEACON_INTERVAL,
+ /* Listen interval in TUs */
+ WMI_VDEV_PARAM_LISTEN_INTERVAL,
+ /* multicast rate in Mbps */
+ WMI_VDEV_PARAM_MULTICAST_RATE,
+ /* management frame rate in Mbps */
+ WMI_VDEV_PARAM_MGMT_TX_RATE,
+ /* slot time (long vs short) */
+ WMI_VDEV_PARAM_SLOT_TIME,
+ /* preamble (long vs short) */
+ WMI_VDEV_PARAM_PREAMBLE,
+ /* SWBA time (time before tbtt in msec) */
+ WMI_VDEV_PARAM_SWBA_TIME,
+ /* time period for updating VDEV stats */
+ WMI_VDEV_STATS_UPDATE_PERIOD,
+ /* age out time in msec for frames queued for station in power save */
+ WMI_VDEV_PWRSAVE_AGEOUT_TIME,
+ /*
+ * Host SWBA interval (time in msec before tbtt for SWBA event
+ * generation).
+ */
+ WMI_VDEV_HOST_SWBA_INTERVAL,
+ /* DTIM period (specified in units of num beacon intervals) */
+ WMI_VDEV_PARAM_DTIM_PERIOD,
+ /*
+ * scheduler air time limit for this VDEV. used by off chan
+ * scheduler.
+ */
+ WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
+ /* enable/dsiable WDS for this VDEV */
+ WMI_VDEV_PARAM_WDS,
+ /* ATIM Window */
+ WMI_VDEV_PARAM_ATIM_WINDOW,
+ /* BMISS max */
+ WMI_VDEV_PARAM_BMISS_COUNT_MAX,
+ /* BMISS first time */
+ WMI_VDEV_PARAM_BMISS_FIRST_BCNT,
+ /* BMISS final time */
+ WMI_VDEV_PARAM_BMISS_FINAL_BCNT,
+ /* WMM enables/disabled */
+ WMI_VDEV_PARAM_FEATURE_WMM,
+ /* Channel width */
+ WMI_VDEV_PARAM_CHWIDTH,
+ /* Channel Offset */
+ WMI_VDEV_PARAM_CHEXTOFFSET,
+ /* Disable HT Protection */
+ WMI_VDEV_PARAM_DISABLE_HTPROTECTION,
+ /* Quick STA Kickout */
+ WMI_VDEV_PARAM_STA_QUICKKICKOUT,
+ /* Rate to be used with Management frames */
+ WMI_VDEV_PARAM_MGMT_RATE,
+ /* Protection Mode */
+ WMI_VDEV_PARAM_PROTECTION_MODE,
+ /* Fixed rate setting */
+ WMI_VDEV_PARAM_FIXED_RATE,
+ /* Short GI Enable/Disable */
+ WMI_VDEV_PARAM_SGI,
+ /* Enable LDPC */
+ WMI_VDEV_PARAM_LDPC,
+ /* Enable Tx STBC */
+ WMI_VDEV_PARAM_TX_STBC,
+ /* Enable Rx STBC */
+ WMI_VDEV_PARAM_RX_STBC,
+ /* Intra BSS forwarding */
+ WMI_VDEV_PARAM_INTRA_BSS_FWD,
+ /* Setting Default xmit key for Vdev */
+ WMI_VDEV_PARAM_DEF_KEYID,
+ /* NSS width */
+ WMI_VDEV_PARAM_NSS,
+ /* Set the custom rate for the broadcast data frames */
+ WMI_VDEV_PARAM_BCAST_DATA_RATE,
+ /* Set the custom rate (rate-code) for multicast data frames */
+ WMI_VDEV_PARAM_MCAST_DATA_RATE,
+ /* Tx multicast packet indicate Enable/Disable */
+ WMI_VDEV_PARAM_MCAST_INDICATE,
+ /* Tx DHCP packet indicate Enable/Disable */
+ WMI_VDEV_PARAM_DHCP_INDICATE,
+ /* Enable host inspection of Tx unicast packet to unknown destination */
+ WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
+
+ /* The minimum amount of time AP begins to consider STA inactive */
+ WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
+
+ /*
+ * An associated STA is considered inactive when there is no recent
+ * TX/RX activity and no downlink frames are buffered for it. Once a
+ * STA exceeds the maximum idle inactive time, the AP will send an
+ * 802.11 data-null as a keep alive to verify the STA is still
+ * associated. If the STA does ACK the data-null, or if the data-null
+ * is buffered and the STA does not retrieve it, the STA will be
+ * considered unresponsive
+ * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
+ */
+ WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
+
+ /*
+ * An associated STA is considered unresponsive if there is no recent
+ * TX/RX activity and downlink frames are buffered for it. Once a STA
+ * exceeds the maximum unresponsive time, the AP will send a
+ * WMI_STA_KICKOUT event to the host so the STA can be deleted.
+ */
+ WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
+
+ /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
+ WMI_VDEV_PARAM_AP_ENABLE_NAWDS,
+ /* Enable/Disable RTS-CTS */
+ WMI_VDEV_PARAM_ENABLE_RTSCTS,
+ /* Enable TXBFee/er */
+ WMI_VDEV_PARAM_TXBF,
+
+ /* Set packet power save */
+ WMI_VDEV_PARAM_PACKET_POWERSAVE,
+
+ /*
+ * Drops un-encrypted packets if eceived in an encrypted connection
+ * otherwise forwards to host.
+ */
+ WMI_VDEV_PARAM_DROP_UNENCRY,
+
+ /*
+ * Set the encapsulation type for frames.
+ */
+ WMI_VDEV_PARAM_TX_ENCAP_TYPE,
+};
+
+/* the definition of different VDEV parameters */
+enum wmi_10x_vdev_param {
+ /* RTS Threshold */
+ WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1,
+ /* Fragmentation threshold */
+ WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
+ /* beacon interval in TUs */
+ WMI_10X_VDEV_PARAM_BEACON_INTERVAL,
+ /* Listen interval in TUs */
+ WMI_10X_VDEV_PARAM_LISTEN_INTERVAL,
+ /* multicast rate in Mbps */
+ WMI_10X_VDEV_PARAM_MULTICAST_RATE,
+ /* management frame rate in Mbps */
+ WMI_10X_VDEV_PARAM_MGMT_TX_RATE,
+ /* slot time (long vs short) */
+ WMI_10X_VDEV_PARAM_SLOT_TIME,
+ /* preamble (long vs short) */
+ WMI_10X_VDEV_PARAM_PREAMBLE,
+ /* SWBA time (time before tbtt in msec) */
+ WMI_10X_VDEV_PARAM_SWBA_TIME,
+ /* time period for updating VDEV stats */
+ WMI_10X_VDEV_STATS_UPDATE_PERIOD,
+ /* age out time in msec for frames queued for station in power save */
+ WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME,
+ /*
+ * Host SWBA interval (time in msec before tbtt for SWBA event
+ * generation).
+ */
+ WMI_10X_VDEV_HOST_SWBA_INTERVAL,
+ /* DTIM period (specified in units of num beacon intervals) */
+ WMI_10X_VDEV_PARAM_DTIM_PERIOD,
+ /*
+ * scheduler air time limit for this VDEV. used by off chan
+ * scheduler.
+ */
+ WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
+ /* enable/dsiable WDS for this VDEV */
+ WMI_10X_VDEV_PARAM_WDS,
+ /* ATIM Window */
+ WMI_10X_VDEV_PARAM_ATIM_WINDOW,
+ /* BMISS max */
+ WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX,
+ /* WMM enables/disabled */
+ WMI_10X_VDEV_PARAM_FEATURE_WMM,
+ /* Channel width */
+ WMI_10X_VDEV_PARAM_CHWIDTH,
+ /* Channel Offset */
+ WMI_10X_VDEV_PARAM_CHEXTOFFSET,
+ /* Disable HT Protection */
+ WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION,
+ /* Quick STA Kickout */
+ WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT,
+ /* Rate to be used with Management frames */
+ WMI_10X_VDEV_PARAM_MGMT_RATE,
+ /* Protection Mode */
+ WMI_10X_VDEV_PARAM_PROTECTION_MODE,
+ /* Fixed rate setting */
+ WMI_10X_VDEV_PARAM_FIXED_RATE,
+ /* Short GI Enable/Disable */
+ WMI_10X_VDEV_PARAM_SGI,
+ /* Enable LDPC */
+ WMI_10X_VDEV_PARAM_LDPC,
+ /* Enable Tx STBC */
+ WMI_10X_VDEV_PARAM_TX_STBC,
+ /* Enable Rx STBC */
+ WMI_10X_VDEV_PARAM_RX_STBC,
+ /* Intra BSS forwarding */
+ WMI_10X_VDEV_PARAM_INTRA_BSS_FWD,
+ /* Setting Default xmit key for Vdev */
+ WMI_10X_VDEV_PARAM_DEF_KEYID,
+ /* NSS width */
+ WMI_10X_VDEV_PARAM_NSS,
+ /* Set the custom rate for the broadcast data frames */
+ WMI_10X_VDEV_PARAM_BCAST_DATA_RATE,
+ /* Set the custom rate (rate-code) for multicast data frames */
+ WMI_10X_VDEV_PARAM_MCAST_DATA_RATE,
+ /* Tx multicast packet indicate Enable/Disable */
+ WMI_10X_VDEV_PARAM_MCAST_INDICATE,
+ /* Tx DHCP packet indicate Enable/Disable */
+ WMI_10X_VDEV_PARAM_DHCP_INDICATE,
+ /* Enable host inspection of Tx unicast packet to unknown destination */
+ WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
+
+ /* The minimum amount of time AP begins to consider STA inactive */
+ WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
+
+ /*
+ * An associated STA is considered inactive when there is no recent
+ * TX/RX activity and no downlink frames are buffered for it. Once a
+ * STA exceeds the maximum idle inactive time, the AP will send an
+ * 802.11 data-null as a keep alive to verify the STA is still
+ * associated. If the STA does ACK the data-null, or if the data-null
+ * is buffered and the STA does not retrieve it, the STA will be
+ * considered unresponsive
+ * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
+ */
+ WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
+
+ /*
+ * An associated STA is considered unresponsive if there is no recent
+ * TX/RX activity and downlink frames are buffered for it. Once a STA
+ * exceeds the maximum unresponsive time, the AP will send a
+ * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted.
+ */
+ WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
+
+ /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
+ WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS,
+
+ WMI_10X_VDEV_PARAM_MCAST2UCAST_SET,
+ /* Enable/Disable RTS-CTS */
+ WMI_10X_VDEV_PARAM_ENABLE_RTSCTS,
+
+ WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
+
+ /* following are available as of firmware 10.2 */
+ WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE,
+ WMI_10X_VDEV_PARAM_CABQ_MAXDUR,
+ WMI_10X_VDEV_PARAM_MFPTEST_SET,
+ WMI_10X_VDEV_PARAM_RTS_FIXED_RATE,
+ WMI_10X_VDEV_PARAM_VHT_SGIMASK,
+ WMI_10X_VDEV_PARAM_VHT80_RATEMASK,
+ WMI_10X_VDEV_PARAM_TSF_INCREMENT,
+};
+
+enum wmi_10_4_vdev_param {
+ WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1,
+ WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
+ WMI_10_4_VDEV_PARAM_BEACON_INTERVAL,
+ WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL,
+ WMI_10_4_VDEV_PARAM_MULTICAST_RATE,
+ WMI_10_4_VDEV_PARAM_MGMT_TX_RATE,
+ WMI_10_4_VDEV_PARAM_SLOT_TIME,
+ WMI_10_4_VDEV_PARAM_PREAMBLE,
+ WMI_10_4_VDEV_PARAM_SWBA_TIME,
+ WMI_10_4_VDEV_STATS_UPDATE_PERIOD,
+ WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME,
+ WMI_10_4_VDEV_HOST_SWBA_INTERVAL,
+ WMI_10_4_VDEV_PARAM_DTIM_PERIOD,
+ WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
+ WMI_10_4_VDEV_PARAM_WDS,
+ WMI_10_4_VDEV_PARAM_ATIM_WINDOW,
+ WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX,
+ WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT,
+ WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT,
+ WMI_10_4_VDEV_PARAM_FEATURE_WMM,
+ WMI_10_4_VDEV_PARAM_CHWIDTH,
+ WMI_10_4_VDEV_PARAM_CHEXTOFFSET,
+ WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION,
+ WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT,
+ WMI_10_4_VDEV_PARAM_MGMT_RATE,
+ WMI_10_4_VDEV_PARAM_PROTECTION_MODE,
+ WMI_10_4_VDEV_PARAM_FIXED_RATE,
+ WMI_10_4_VDEV_PARAM_SGI,
+ WMI_10_4_VDEV_PARAM_LDPC,
+ WMI_10_4_VDEV_PARAM_TX_STBC,
+ WMI_10_4_VDEV_PARAM_RX_STBC,
+ WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD,
+ WMI_10_4_VDEV_PARAM_DEF_KEYID,
+ WMI_10_4_VDEV_PARAM_NSS,
+ WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE,
+ WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE,
+ WMI_10_4_VDEV_PARAM_MCAST_INDICATE,
+ WMI_10_4_VDEV_PARAM_DHCP_INDICATE,
+ WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
+ WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
+ WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
+ WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
+ WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS,
+ WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET,
+ WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS,
+ WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES,
+ WMI_10_4_VDEV_PARAM_TXBF,
+ WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE,
+ WMI_10_4_VDEV_PARAM_DROP_UNENCRY,
+ WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE,
+ WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
+ WMI_10_4_VDEV_PARAM_CABQ_MAXDUR,
+ WMI_10_4_VDEV_PARAM_MFPTEST_SET,
+ WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE,
+ WMI_10_4_VDEV_PARAM_VHT_SGIMASK,
+ WMI_10_4_VDEV_PARAM_VHT80_RATEMASK,
+ WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE,
+ WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM,
+ WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE,
+ WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP,
+ WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP,
+ WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE,
+ WMI_10_4_VDEV_PARAM_PROXY_STA,
+ WMI_10_4_VDEV_PARAM_MERU_VC,
+ WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE,
+ WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
+ WMI_10_4_VDEV_PARAM_SENSOR_AP,
+ WMI_10_4_VDEV_PARAM_BEACON_RATE,
+ WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS,
+ WMI_10_4_VDEV_PARAM_STA_KICKOUT,
+ WMI_10_4_VDEV_PARAM_CAPABILITIES,
+ WMI_10_4_VDEV_PARAM_TSF_INCREMENT,
+ WMI_10_4_VDEV_PARAM_RX_FILTER,
+ WMI_10_4_VDEV_PARAM_MGMT_TX_POWER,
+ WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY,
+ WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS,
+ WMI_10_4_VDEV_PARAM_TSF_DECREMENT,
+};
+
+#define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0)
+#define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1)
+#define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2)
+#define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3)
+
+#define WMI_TXBF_STS_CAP_OFFSET_LSB 4
+#define WMI_TXBF_STS_CAP_OFFSET_MASK 0xf0
+#define WMI_BF_SOUND_DIM_OFFSET_LSB 8
+#define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00
+
+/* slot time long */
+#define WMI_VDEV_SLOT_TIME_LONG 0x1
+/* slot time short */
+#define WMI_VDEV_SLOT_TIME_SHORT 0x2
+/* preablbe long */
+#define WMI_VDEV_PREAMBLE_LONG 0x1
+/* preablbe short */
+#define WMI_VDEV_PREAMBLE_SHORT 0x2
+
+enum wmi_start_event_param {
+ WMI_VDEV_RESP_START_EVENT = 0,
+ WMI_VDEV_RESP_RESTART_EVENT,
+};
+
+struct wmi_vdev_start_response_event {
+ __le32 vdev_id;
+ __le32 req_id;
+ __le32 resp_type; /* %WMI_VDEV_RESP_ */
+ __le32 status;
+} __packed;
+
+struct wmi_vdev_standby_req_event {
+ /* unique id identifying the VDEV, generated by the caller */
+ __le32 vdev_id;
+} __packed;
+
+struct wmi_vdev_resume_req_event {
+ /* unique id identifying the VDEV, generated by the caller */
+ __le32 vdev_id;
+} __packed;
+
+struct wmi_vdev_stopped_event {
+ /* unique id identifying the VDEV, generated by the caller */
+ __le32 vdev_id;
+} __packed;
+
+/*
+ * common structure used for simple events
+ * (stopped, resume_req, standby response)
+ */
+struct wmi_vdev_simple_event {
+ /* unique id identifying the VDEV, generated by the caller */
+ __le32 vdev_id;
+} __packed;
+
+/* VDEV start response status codes */
+/* VDEV successfully started */
+#define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0
+
+/* requested VDEV not found */
+#define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1
+
+/* unsupported VDEV combination */
+#define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2
+
+/* TODO: please add more comments if you have in-depth information */
+struct wmi_vdev_spectral_conf_cmd {
+ __le32 vdev_id;
+
+ /* number of fft samples to send (0 for infinite) */
+ __le32 scan_count;
+ __le32 scan_period;
+ __le32 scan_priority;
+
+ /* number of bins in the FFT: 2^(fft_size - bin_scale) */
+ __le32 scan_fft_size;
+ __le32 scan_gc_ena;
+ __le32 scan_restart_ena;
+ __le32 scan_noise_floor_ref;
+ __le32 scan_init_delay;
+ __le32 scan_nb_tone_thr;
+ __le32 scan_str_bin_thr;
+ __le32 scan_wb_rpt_mode;
+ __le32 scan_rssi_rpt_mode;
+ __le32 scan_rssi_thr;
+ __le32 scan_pwr_format;
+
+ /* rpt_mode: Format of FFT report to software for spectral scan
+ * triggered FFTs:
+ * 0: No FFT report (only spectral scan summary report)
+ * 1: 2-dword summary of metrics for each completed FFT + spectral
+ * scan summary report
+ * 2: 2-dword summary of metrics for each completed FFT +
+ * 1x- oversampled bins(in-band) per FFT + spectral scan summary
+ * report
+ * 3: 2-dword summary of metrics for each completed FFT +
+ * 2x- oversampled bins (all) per FFT + spectral scan summary
+ */
+ __le32 scan_rpt_mode;
+ __le32 scan_bin_scale;
+ __le32 scan_dbm_adj;
+ __le32 scan_chn_mask;
+} __packed;
+
+struct wmi_vdev_spectral_conf_arg {
+ u32 vdev_id;
+ u32 scan_count;
+ u32 scan_period;
+ u32 scan_priority;
+ u32 scan_fft_size;
+ u32 scan_gc_ena;
+ u32 scan_restart_ena;
+ u32 scan_noise_floor_ref;
+ u32 scan_init_delay;
+ u32 scan_nb_tone_thr;
+ u32 scan_str_bin_thr;
+ u32 scan_wb_rpt_mode;
+ u32 scan_rssi_rpt_mode;
+ u32 scan_rssi_thr;
+ u32 scan_pwr_format;
+ u32 scan_rpt_mode;
+ u32 scan_bin_scale;
+ u32 scan_dbm_adj;
+ u32 scan_chn_mask;
+};
+
+#define WMI_SPECTRAL_ENABLE_DEFAULT 0
+#define WMI_SPECTRAL_COUNT_DEFAULT 0
+#define WMI_SPECTRAL_PERIOD_DEFAULT 35
+#define WMI_SPECTRAL_PRIORITY_DEFAULT 1
+#define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7
+#define WMI_SPECTRAL_GC_ENA_DEFAULT 1
+#define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0
+#define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96
+#define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80
+#define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12
+#define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8
+#define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0
+#define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0
+#define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0
+#define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0
+#define WMI_SPECTRAL_RPT_MODE_DEFAULT 2
+#define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1
+#define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1
+#define WMI_SPECTRAL_CHN_MASK_DEFAULT 1
+
+struct wmi_vdev_spectral_enable_cmd {
+ __le32 vdev_id;
+ __le32 trigger_cmd;
+ __le32 enable_cmd;
+} __packed;
+
+#define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1
+#define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2
+#define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1
+#define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2
+
+/* Beacon processing related command and event structures */
+struct wmi_bcn_tx_hdr {
+ __le32 vdev_id;
+ __le32 tx_rate;
+ __le32 tx_power;
+ __le32 bcn_len;
+} __packed;
+
+struct wmi_bcn_tx_cmd {
+ struct wmi_bcn_tx_hdr hdr;
+ u8 *bcn[0];
+} __packed;
+
+struct wmi_bcn_tx_arg {
+ u32 vdev_id;
+ u32 tx_rate;
+ u32 tx_power;
+ u32 bcn_len;
+ const void *bcn;
+};
+
+enum wmi_bcn_tx_ref_flags {
+ WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1,
+ WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2,
+};
+
+/* TODO: It is unclear why "no antenna" works while any other seemingly valid
+ * chainmask yields no beacons on the air at all.
+ */
+#define WMI_BCN_TX_REF_DEF_ANTENNA 0
+
+struct wmi_bcn_tx_ref_cmd {
+ __le32 vdev_id;
+ __le32 data_len;
+ /* physical address of the frame - dma pointer */
+ __le32 data_ptr;
+ /* id for host to track */
+ __le32 msdu_id;
+ /* frame ctrl to setup PPDU desc */
+ __le32 frame_control;
+ /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */
+ __le32 flags;
+ /* introduced in 10.2 */
+ __le32 antenna_mask;
+} __packed;
+
+/* Beacon filter */
+#define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */
+#define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */
+#define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */
+#define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */
+#define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */
+
+struct wmi_bcn_filter_rx_cmd {
+ /* Filter ID */
+ __le32 bcn_filter_id;
+ /* Filter type - wmi_bcn_filter */
+ __le32 bcn_filter;
+ /* Buffer len */
+ __le32 bcn_filter_len;
+ /* Filter info (threshold, BSSID, RSSI) */
+ u8 *bcn_filter_buf;
+} __packed;
+
+/* Capabilities and IEs to be passed to firmware */
+struct wmi_bcn_prb_info {
+ /* Capabilities */
+ __le32 caps;
+ /* ERP info */
+ __le32 erp;
+ /* Advanced capabilities */
+ /* HT capabilities */
+ /* HT Info */
+ /* ibss_dfs */
+ /* wpa Info */
+ /* rsn Info */
+ /* rrm info */
+ /* ath_ext */
+ /* app IE */
+} __packed;
+
+struct wmi_bcn_tmpl_cmd {
+ /* unique id identifying the VDEV, generated by the caller */
+ __le32 vdev_id;
+ /* TIM IE offset from the beginning of the template. */
+ __le32 tim_ie_offset;
+ /* beacon probe capabilities and IEs */
+ struct wmi_bcn_prb_info bcn_prb_info;
+ /* beacon buffer length */
+ __le32 buf_len;
+ /* variable length data */
+ u8 data[1];
+} __packed;
+
+struct wmi_prb_tmpl_cmd {
+ /* unique id identifying the VDEV, generated by the caller */
+ __le32 vdev_id;
+ /* beacon probe capabilities and IEs */
+ struct wmi_bcn_prb_info bcn_prb_info;
+ /* beacon buffer length */
+ __le32 buf_len;
+ /* Variable length data */
+ u8 data[1];
+} __packed;
+
+enum wmi_sta_ps_mode {
+ /* enable power save for the given STA VDEV */
+ WMI_STA_PS_MODE_DISABLED = 0,
+ /* disable power save for a given STA VDEV */
+ WMI_STA_PS_MODE_ENABLED = 1,
+};
+
+struct wmi_sta_powersave_mode_cmd {
+ /* unique id identifying the VDEV, generated by the caller */
+ __le32 vdev_id;
+
+ /*
+ * Power save mode
+ * (see enum wmi_sta_ps_mode)
+ */
+ __le32 sta_ps_mode;
+} __packed;
+
+enum wmi_csa_offload_en {
+ WMI_CSA_OFFLOAD_DISABLE = 0,
+ WMI_CSA_OFFLOAD_ENABLE = 1,
+};
+
+struct wmi_csa_offload_enable_cmd {
+ __le32 vdev_id;
+ __le32 csa_offload_enable;
+} __packed;
+
+struct wmi_csa_offload_chanswitch_cmd {
+ __le32 vdev_id;
+ struct wmi_channel chan;
+} __packed;
+
+/*
+ * This parameter controls the policy for retrieving frames from AP while the
+ * STA is in sleep state.
+ *
+ * Only takes affect if the sta_ps_mode is enabled
+ */
+enum wmi_sta_ps_param_rx_wake_policy {
+ /*
+ * Wake up when ever there is an RX activity on the VDEV. In this mode
+ * the Power save SM(state machine) will come out of sleep by either
+ * sending null frame (or) a data frame (with PS==0) in response to TIM
+ * bit set in the received beacon frame from AP.
+ */
+ WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0,
+
+ /*
+ * Here the power save state machine will not wakeup in response to TIM
+ * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD
+ * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all
+ * access categories are delivery-enabled, the station will send a
+ * UAPSD trigger frame, otherwise it will send a PS-Poll.
+ */
+ WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1,
+};
+
+/*
+ * Number of tx frames/beacon that cause the power save SM to wake up.
+ *
+ * Value 1 causes the SM to wake up for every TX. Value 0 has a special
+ * meaning, It will cause the SM to never wake up. This is useful if you want
+ * to keep the system to sleep all the time for some kind of test mode . host
+ * can change this parameter any time. It will affect at the next tx frame.
+ */
+enum wmi_sta_ps_param_tx_wake_threshold {
+ WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0,
+ WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1,
+
+ /*
+ * Values greater than one indicate that many TX attempts per beacon
+ * interval before the STA will wake up
+ */
+};
+
+/*
+ * The maximum number of PS-Poll frames the FW will send in response to
+ * traffic advertised in TIM before waking up (by sending a null frame with PS
+ * = 0). Value 0 has a special meaning: there is no maximum count and the FW
+ * will send as many PS-Poll as are necessary to retrieve buffered BU. This
+ * parameter is used when the RX wake policy is
+ * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake
+ * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE.
+ */
+enum wmi_sta_ps_param_pspoll_count {
+ WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0,
+ /*
+ * Values greater than 0 indicate the maximum numer of PS-Poll frames
+ * FW will send before waking up.
+ */
+
+ /* When u-APSD is enabled the firmware will be very reluctant to exit
+ * STA PS. This could result in very poor Rx performance with STA doing
+ * PS-Poll for each and every buffered frame. This value is a bit
+ * arbitrary.
+ */
+ WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3,
+};
+
+/*
+ * This will include the delivery and trigger enabled state for every AC.
+ * This is the negotiated state with AP. The host MLME needs to set this based
+ * on AP capability and the state Set in the association request by the
+ * station MLME.Lower 8 bits of the value specify the UAPSD configuration.
+ */
+#define WMI_UAPSD_AC_TYPE_DELI 0
+#define WMI_UAPSD_AC_TYPE_TRIG 1
+
+#define WMI_UAPSD_AC_BIT_MASK(ac, type) \
+ (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1))
+
+enum wmi_sta_ps_param_uapsd {
+ WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
+ WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1),
+ WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
+ WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3),
+ WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
+ WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5),
+ WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
+ WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7),
+};
+
+#define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX
+
+struct wmi_sta_uapsd_auto_trig_param {
+ __le32 wmm_ac;
+ __le32 user_priority;
+ __le32 service_interval;
+ __le32 suspend_interval;
+ __le32 delay_interval;
+};
+
+struct wmi_sta_uapsd_auto_trig_cmd_fixed_param {
+ __le32 vdev_id;
+ struct wmi_mac_addr peer_macaddr;
+ __le32 num_ac;
+};
+
+struct wmi_sta_uapsd_auto_trig_arg {
+ u32 wmm_ac;
+ u32 user_priority;
+ u32 service_interval;
+ u32 suspend_interval;
+ u32 delay_interval;
+};
+
+enum wmi_sta_powersave_param {
+ /*
+ * Controls how frames are retrievd from AP while STA is sleeping
+ *
+ * (see enum wmi_sta_ps_param_rx_wake_policy)
+ */
+ WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0,
+
+ /*
+ * The STA will go active after this many TX
+ *
+ * (see enum wmi_sta_ps_param_tx_wake_threshold)
+ */
+ WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1,
+
+ /*
+ * Number of PS-Poll to send before STA wakes up
+ *
+ * (see enum wmi_sta_ps_param_pspoll_count)
+ *
+ */
+ WMI_STA_PS_PARAM_PSPOLL_COUNT = 2,
+
+ /*
+ * TX/RX inactivity time in msec before going to sleep.
+ *
+ * The power save SM will monitor tx/rx activity on the VDEV, if no
+ * activity for the specified msec of the parameter the Power save
+ * SM will go to sleep.
+ */
+ WMI_STA_PS_PARAM_INACTIVITY_TIME = 3,
+
+ /*
+ * Set uapsd configuration.
+ *
+ * (see enum wmi_sta_ps_param_uapsd)
+ */
+ WMI_STA_PS_PARAM_UAPSD = 4,
+};
+
+struct wmi_sta_powersave_param_cmd {
+ __le32 vdev_id;
+ __le32 param_id; /* %WMI_STA_PS_PARAM_ */
+ __le32 param_value;
+} __packed;
+
+/* No MIMO power save */
+#define WMI_STA_MIMO_PS_MODE_DISABLE
+/* mimo powersave mode static*/
+#define WMI_STA_MIMO_PS_MODE_STATIC
+/* mimo powersave mode dynamic */
+#define WMI_STA_MIMO_PS_MODE_DYNAMIC
+
+struct wmi_sta_mimo_ps_mode_cmd {
+ /* unique id identifying the VDEV, generated by the caller */
+ __le32 vdev_id;
+ /* mimo powersave mode as defined above */
+ __le32 mimo_pwrsave_mode;
+} __packed;
+
+/* U-APSD configuration of peer station from (re)assoc request and TSPECs */
+enum wmi_ap_ps_param_uapsd {
+ WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
+ WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1),
+ WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
+ WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3),
+ WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
+ WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5),
+ WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
+ WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7),
+};
+
+/* U-APSD maximum service period of peer station */
+enum wmi_ap_ps_peer_param_max_sp {
+ WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0,
+ WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1,
+ WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2,
+ WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3,
+ MAX_WMI_AP_PS_PEER_PARAM_MAX_SP,
+};
+
+/*
+ * AP power save parameter
+ * Set a power save specific parameter for a peer station
+ */
+enum wmi_ap_ps_peer_param {
+ /* Set uapsd configuration for a given peer.
+ *
+ * Include the delivery and trigger enabled state for every AC.
+ * The host MLME needs to set this based on AP capability and stations
+ * request Set in the association request received from the station.
+ *
+ * Lower 8 bits of the value specify the UAPSD configuration.
+ *
+ * (see enum wmi_ap_ps_param_uapsd)
+ * The default value is 0.
+ */
+ WMI_AP_PS_PEER_PARAM_UAPSD = 0,
+
+ /*
+ * Set the service period for a UAPSD capable station
+ *
+ * The service period from wme ie in the (re)assoc request frame.
+ *
+ * (see enum wmi_ap_ps_peer_param_max_sp)
+ */
+ WMI_AP_PS_PEER_PARAM_MAX_SP = 1,
+
+ /* Time in seconds for aging out buffered frames for STA in PS */
+ WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2,
+};
+
+struct wmi_ap_ps_peer_cmd {
+ /* unique id identifying the VDEV, generated by the caller */
+ __le32 vdev_id;
+
+ /* peer MAC address */
+ struct wmi_mac_addr peer_macaddr;
+
+ /* AP powersave param (see enum wmi_ap_ps_peer_param) */
+ __le32 param_id;
+
+ /* AP powersave param value */
+ __le32 param_value;
+} __packed;
+
+/* 128 clients = 4 words */
+#define WMI_TIM_BITMAP_ARRAY_SIZE 4
+
+struct wmi_tim_info {
+ __le32 tim_len;
+ __le32 tim_mcast;
+ __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE];
+ __le32 tim_changed;
+ __le32 tim_num_ps_pending;
+} __packed;
+
+struct wmi_tim_info_arg {
+ __le32 tim_len;
+ __le32 tim_mcast;
+ const __le32 *tim_bitmap;
+ __le32 tim_changed;
+ __le32 tim_num_ps_pending;
+} __packed;
+
+/* Maximum number of NOA Descriptors supported */
+#define WMI_P2P_MAX_NOA_DESCRIPTORS 4
+#define WMI_P2P_OPPPS_ENABLE_BIT BIT(0)
+#define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1
+#define WMI_P2P_NOA_CHANGED_BIT BIT(0)
+
+struct wmi_p2p_noa_info {
+ /* Bit 0 - Flag to indicate an update in NOA schedule
+ * Bits 7-1 - Reserved
+ */
+ u8 changed;
+ /* NOA index */
+ u8 index;
+ /* Bit 0 - Opp PS state of the AP
+ * Bits 1-7 - Ctwindow in TUs
+ */
+ u8 ctwindow_oppps;
+ /* Number of NOA descriptors */
+ u8 num_descriptors;
+
+ struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS];
+} __packed;
+
+struct wmi_bcn_info {
+ struct wmi_tim_info tim_info;
+ struct wmi_p2p_noa_info p2p_noa_info;
+} __packed;
+
+struct wmi_host_swba_event {
+ __le32 vdev_map;
+ struct wmi_bcn_info bcn_info[0];
+} __packed;
+
+struct wmi_10_2_4_bcn_info {
+ struct wmi_tim_info tim_info;
+ /* The 10.2.4 FW doesn't have p2p NOA info */
+} __packed;
+
+struct wmi_10_2_4_host_swba_event {
+ __le32 vdev_map;
+ struct wmi_10_2_4_bcn_info bcn_info[0];
+} __packed;
+
+/* 16 words = 512 client + 1 word = for guard */
+#define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17
+
+struct wmi_10_4_tim_info {
+ __le32 tim_len;
+ __le32 tim_mcast;
+ __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE];
+ __le32 tim_changed;
+ __le32 tim_num_ps_pending;
+} __packed;
+
+#define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1
+
+struct wmi_10_4_p2p_noa_info {
+ /* Bit 0 - Flag to indicate an update in NOA schedule
+ * Bits 7-1 - Reserved
+ */
+ u8 changed;
+ /* NOA index */
+ u8 index;
+ /* Bit 0 - Opp PS state of the AP
+ * Bits 1-7 - Ctwindow in TUs
+ */
+ u8 ctwindow_oppps;
+ /* Number of NOA descriptors */
+ u8 num_descriptors;
+
+ struct wmi_p2p_noa_descriptor
+ noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS];
+} __packed;
+
+struct wmi_10_4_bcn_info {
+ struct wmi_10_4_tim_info tim_info;
+ struct wmi_10_4_p2p_noa_info p2p_noa_info;
+} __packed;
+
+struct wmi_10_4_host_swba_event {
+ __le32 vdev_map;
+ struct wmi_10_4_bcn_info bcn_info[0];
+} __packed;
+
+#define WMI_MAX_AP_VDEV 16
+
+struct wmi_tbtt_offset_event {
+ __le32 vdev_map;
+ __le32 tbttoffset_list[WMI_MAX_AP_VDEV];
+} __packed;
+
+struct wmi_peer_create_cmd {
+ __le32 vdev_id;
+ struct wmi_mac_addr peer_macaddr;
+ __le32 peer_type;
+} __packed;
+
+enum wmi_peer_type {
+ WMI_PEER_TYPE_DEFAULT = 0,
+ WMI_PEER_TYPE_BSS = 1,
+ WMI_PEER_TYPE_TDLS = 2,
+};
+
+struct wmi_peer_delete_cmd {
+ __le32 vdev_id;
+ struct wmi_mac_addr peer_macaddr;
+} __packed;
+
+struct wmi_peer_flush_tids_cmd {
+ __le32 vdev_id;
+ struct wmi_mac_addr peer_macaddr;
+ __le32 peer_tid_bitmap;
+} __packed;
+
+struct wmi_fixed_rate {
+ /*
+ * rate mode . 0: disable fixed rate (auto rate)
+ * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps
+ * 2: ht20 11n rate specified as mcs index
+ * 3: ht40 11n rate specified as mcs index
+ */
+ __le32 rate_mode;
+ /*
+ * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB)
+ * and series 3 is stored at byte 3 (MSB)
+ */
+ __le32 rate_series;
+ /*
+ * 4 retry counts for 4 rate series. retry count for rate 0 is stored
+ * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3
+ * (MSB)
+ */
+ __le32 rate_retries;
+} __packed;
+
+struct wmi_peer_fixed_rate_cmd {
+ /* unique id identifying the VDEV, generated by the caller */
+ __le32 vdev_id;
+ /* peer MAC address */
+ struct wmi_mac_addr peer_macaddr;
+ /* fixed rate */
+ struct wmi_fixed_rate peer_fixed_rate;
+} __packed;
+
+#define WMI_MGMT_TID 17
+
+struct wmi_addba_clear_resp_cmd {
+ /* unique id identifying the VDEV, generated by the caller */
+ __le32 vdev_id;
+ /* peer MAC address */
+ struct wmi_mac_addr peer_macaddr;
+} __packed;
+
+struct wmi_addba_send_cmd {
+ /* unique id identifying the VDEV, generated by the caller */
+ __le32 vdev_id;
+ /* peer MAC address */
+ struct wmi_mac_addr peer_macaddr;
+ /* Tid number */
+ __le32 tid;
+ /* Buffer/Window size*/
+ __le32 buffersize;
+} __packed;
+
+struct wmi_delba_send_cmd {
+ /* unique id identifying the VDEV, generated by the caller */
+ __le32 vdev_id;
+ /* peer MAC address */
+ struct wmi_mac_addr peer_macaddr;
+ /* Tid number */
+ __le32 tid;
+ /* Is Initiator */
+ __le32 initiator;
+ /* Reason code */
+ __le32 reasoncode;
+} __packed;
+
+struct wmi_addba_setresponse_cmd {
+ /* unique id identifying the vdev, generated by the caller */
+ __le32 vdev_id;
+ /* peer mac address */
+ struct wmi_mac_addr peer_macaddr;
+ /* Tid number */
+ __le32 tid;
+ /* status code */
+ __le32 statuscode;
+} __packed;
+
+struct wmi_send_singleamsdu_cmd {
+ /* unique id identifying the vdev, generated by the caller */
+ __le32 vdev_id;
+ /* peer mac address */
+ struct wmi_mac_addr peer_macaddr;
+ /* Tid number */
+ __le32 tid;
+} __packed;
+
+enum wmi_peer_smps_state {
+ WMI_PEER_SMPS_PS_NONE = 0x0,
+ WMI_PEER_SMPS_STATIC = 0x1,
+ WMI_PEER_SMPS_DYNAMIC = 0x2
+};
+
+enum wmi_peer_chwidth {
+ WMI_PEER_CHWIDTH_20MHZ = 0,
+ WMI_PEER_CHWIDTH_40MHZ = 1,
+ WMI_PEER_CHWIDTH_80MHZ = 2,
+ WMI_PEER_CHWIDTH_160MHZ = 3,
+};
+
+enum wmi_peer_param {
+ WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */
+ WMI_PEER_AMPDU = 0x2,
+ WMI_PEER_AUTHORIZE = 0x3,
+ WMI_PEER_CHAN_WIDTH = 0x4,
+ WMI_PEER_NSS = 0x5,
+ WMI_PEER_USE_4ADDR = 0x6,
+ WMI_PEER_DEBUG = 0xa,
+ WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */
+};
+
+struct wmi_peer_set_param_cmd {
+ __le32 vdev_id;
+ struct wmi_mac_addr peer_macaddr;
+ __le32 param_id;
+ __le32 param_value;
+} __packed;
+
+#define MAX_SUPPORTED_RATES 128
+
+struct wmi_rate_set {
+ /* total number of rates */
+ __le32 num_rates;
+ /*
+ * rates (each 8bit value) packed into a 32 bit word.
+ * the rates are filled from least significant byte to most
+ * significant byte.
+ */
+ __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1];
+} __packed;
+
+struct wmi_rate_set_arg {
+ unsigned int num_rates;
+ u8 rates[MAX_SUPPORTED_RATES];
+};
+
+/*
+ * NOTE: It would bea good idea to represent the Tx MCS
+ * info in one word and Rx in another word. This is split
+ * into multiple words for convenience
+ */
+struct wmi_vht_rate_set {
+ __le32 rx_max_rate; /* Max Rx data rate */
+ __le32 rx_mcs_set; /* Negotiated RX VHT rates */
+ __le32 tx_max_rate; /* Max Tx data rate */
+ __le32 tx_mcs_set; /* Negotiated TX VHT rates */
+} __packed;
+
+struct wmi_vht_rate_set_arg {
+ u32 rx_max_rate;
+ u32 rx_mcs_set;
+ u32 tx_max_rate;
+ u32 tx_mcs_set;
+};
+
+struct wmi_peer_set_rates_cmd {
+ /* peer MAC address */
+ struct wmi_mac_addr peer_macaddr;
+ /* legacy rate set */
+ struct wmi_rate_set peer_legacy_rates;
+ /* ht rate set */
+ struct wmi_rate_set peer_ht_rates;
+} __packed;
+
+struct wmi_peer_set_q_empty_callback_cmd {
+ /* unique id identifying the VDEV, generated by the caller */
+ __le32 vdev_id;
+ /* peer MAC address */
+ struct wmi_mac_addr peer_macaddr;
+ __le32 callback_enable;
+} __packed;
+
+struct wmi_peer_flags_map {
+ u32 auth;
+ u32 qos;
+ u32 need_ptk_4_way;
+ u32 need_gtk_2_way;
+ u32 apsd;
+ u32 ht;
+ u32 bw40;
+ u32 stbc;
+ u32 ldbc;
+ u32 dyn_mimops;
+ u32 static_mimops;
+ u32 spatial_mux;
+ u32 vht;
+ u32 bw80;
+ u32 vht_2g;
+ u32 pmf;
+ u32 bw160;
+};
+
+enum wmi_peer_flags {
+ WMI_PEER_AUTH = 0x00000001,
+ WMI_PEER_QOS = 0x00000002,
+ WMI_PEER_NEED_PTK_4_WAY = 0x00000004,
+ WMI_PEER_NEED_GTK_2_WAY = 0x00000010,
+ WMI_PEER_APSD = 0x00000800,
+ WMI_PEER_HT = 0x00001000,
+ WMI_PEER_40MHZ = 0x00002000,
+ WMI_PEER_STBC = 0x00008000,
+ WMI_PEER_LDPC = 0x00010000,
+ WMI_PEER_DYN_MIMOPS = 0x00020000,
+ WMI_PEER_STATIC_MIMOPS = 0x00040000,
+ WMI_PEER_SPATIAL_MUX = 0x00200000,
+ WMI_PEER_VHT = 0x02000000,
+ WMI_PEER_80MHZ = 0x04000000,
+ WMI_PEER_VHT_2G = 0x08000000,
+ WMI_PEER_PMF = 0x10000000,
+ WMI_PEER_160MHZ = 0x20000000
+};
+
+enum wmi_10x_peer_flags {
+ WMI_10X_PEER_AUTH = 0x00000001,
+ WMI_10X_PEER_QOS = 0x00000002,
+ WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004,
+ WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010,
+ WMI_10X_PEER_APSD = 0x00000800,
+ WMI_10X_PEER_HT = 0x00001000,
+ WMI_10X_PEER_40MHZ = 0x00002000,
+ WMI_10X_PEER_STBC = 0x00008000,
+ WMI_10X_PEER_LDPC = 0x00010000,
+ WMI_10X_PEER_DYN_MIMOPS = 0x00020000,
+ WMI_10X_PEER_STATIC_MIMOPS = 0x00040000,
+ WMI_10X_PEER_SPATIAL_MUX = 0x00200000,
+ WMI_10X_PEER_VHT = 0x02000000,
+ WMI_10X_PEER_80MHZ = 0x04000000,
+ WMI_10X_PEER_160MHZ = 0x20000000
+};
+
+enum wmi_10_2_peer_flags {
+ WMI_10_2_PEER_AUTH = 0x00000001,
+ WMI_10_2_PEER_QOS = 0x00000002,
+ WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004,
+ WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010,
+ WMI_10_2_PEER_APSD = 0x00000800,
+ WMI_10_2_PEER_HT = 0x00001000,
+ WMI_10_2_PEER_40MHZ = 0x00002000,
+ WMI_10_2_PEER_STBC = 0x00008000,
+ WMI_10_2_PEER_LDPC = 0x00010000,
+ WMI_10_2_PEER_DYN_MIMOPS = 0x00020000,
+ WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000,
+ WMI_10_2_PEER_SPATIAL_MUX = 0x00200000,
+ WMI_10_2_PEER_VHT = 0x02000000,
+ WMI_10_2_PEER_80MHZ = 0x04000000,
+ WMI_10_2_PEER_VHT_2G = 0x08000000,
+ WMI_10_2_PEER_PMF = 0x10000000,
+ WMI_10_2_PEER_160MHZ = 0x20000000
+};
+
+/*
+ * Peer rate capabilities.
+ *
+ * This is of interest to the ratecontrol
+ * module which resides in the firmware. The bit definitions are
+ * consistent with that defined in if_athrate.c.
+ */
+#define WMI_RC_DS_FLAG 0x01
+#define WMI_RC_CW40_FLAG 0x02
+#define WMI_RC_SGI_FLAG 0x04
+#define WMI_RC_HT_FLAG 0x08
+#define WMI_RC_RTSCTS_FLAG 0x10
+#define WMI_RC_TX_STBC_FLAG 0x20
+#define WMI_RC_RX_STBC_FLAG 0xC0
+#define WMI_RC_RX_STBC_FLAG_S 6
+#define WMI_RC_WEP_TKIP_FLAG 0x100
+#define WMI_RC_TS_FLAG 0x200
+#define WMI_RC_UAPSD_FLAG 0x400
+
+/* Maximum listen interval supported by hw in units of beacon interval */
+#define ATH10K_MAX_HW_LISTEN_INTERVAL 5
+
+struct wmi_common_peer_assoc_complete_cmd {
+ struct wmi_mac_addr peer_macaddr;
+ __le32 vdev_id;
+ __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */
+ __le32 peer_associd; /* 16 LSBs */
+ __le32 peer_flags;
+ __le32 peer_caps; /* 16 LSBs */
+ __le32 peer_listen_intval;
+ __le32 peer_ht_caps;
+ __le32 peer_max_mpdu;
+ __le32 peer_mpdu_density; /* 0..16 */
+ __le32 peer_rate_caps;
+ struct wmi_rate_set peer_legacy_rates;
+ struct wmi_rate_set peer_ht_rates;
+ __le32 peer_nss; /* num of spatial streams */
+ __le32 peer_vht_caps;
+ __le32 peer_phymode;
+ struct wmi_vht_rate_set peer_vht_rates;
+};
+
+struct wmi_main_peer_assoc_complete_cmd {
+ struct wmi_common_peer_assoc_complete_cmd cmd;
+
+ /* HT Operation Element of the peer. Five bytes packed in 2
+ * INT32 array and filled from lsb to msb.
+ */
+ __le32 peer_ht_info[2];
+} __packed;
+
+struct wmi_10_1_peer_assoc_complete_cmd {
+ struct wmi_common_peer_assoc_complete_cmd cmd;
+} __packed;
+
+#define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0
+#define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f
+#define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4
+#define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0
+
+struct wmi_10_2_peer_assoc_complete_cmd {
+ struct wmi_common_peer_assoc_complete_cmd cmd;
+ __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */
+} __packed;
+
+#define PEER_BW_RXNSS_OVERRIDE_OFFSET 31
+
+struct wmi_10_4_peer_assoc_complete_cmd {
+ struct wmi_10_2_peer_assoc_complete_cmd cmd;
+ __le32 peer_bw_rxnss_override;
+} __packed;
+
+struct wmi_peer_assoc_complete_arg {
+ u8 addr[ETH_ALEN];
+ u32 vdev_id;
+ bool peer_reassoc;
+ u16 peer_aid;
+ u32 peer_flags; /* see %WMI_PEER_ */
+ u16 peer_caps;
+ u32 peer_listen_intval;
+ u32 peer_ht_caps;
+ u32 peer_max_mpdu;
+ u32 peer_mpdu_density; /* 0..16 */
+ u32 peer_rate_caps; /* see %WMI_RC_ */
+ struct wmi_rate_set_arg peer_legacy_rates;
+ struct wmi_rate_set_arg peer_ht_rates;
+ u32 peer_num_spatial_streams;
+ u32 peer_vht_caps;
+ enum wmi_phy_mode peer_phymode;
+ struct wmi_vht_rate_set_arg peer_vht_rates;
+ u32 peer_bw_rxnss_override;
+};
+
+struct wmi_peer_add_wds_entry_cmd {
+ /* peer MAC address */
+ struct wmi_mac_addr peer_macaddr;
+ /* wds MAC addr */
+ struct wmi_mac_addr wds_macaddr;
+} __packed;
+
+struct wmi_peer_remove_wds_entry_cmd {
+ /* wds MAC addr */
+ struct wmi_mac_addr wds_macaddr;
+} __packed;
+
+struct wmi_peer_q_empty_callback_event {
+ /* peer MAC address */
+ struct wmi_mac_addr peer_macaddr;
+} __packed;
+
+/*
+ * Channel info WMI event
+ */
+struct wmi_chan_info_event {
+ __le32 err_code;
+ __le32 freq;
+ __le32 cmd_flags;
+ __le32 noise_floor;
+ __le32 rx_clear_count;
+ __le32 cycle_count;
+} __packed;
+
+struct wmi_10_4_chan_info_event {
+ __le32 err_code;
+ __le32 freq;
+ __le32 cmd_flags;
+ __le32 noise_floor;
+ __le32 rx_clear_count;
+ __le32 cycle_count;
+ __le32 chan_tx_pwr_range;
+ __le32 chan_tx_pwr_tp;
+ __le32 rx_frame_count;
+} __packed;
+
+struct wmi_peer_sta_kickout_event {
+ struct wmi_mac_addr peer_macaddr;
+} __packed;
+
+#define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0)
+#define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1)
+
+/* Beacon filter wmi command info */
+#define BCN_FLT_MAX_SUPPORTED_IES 256
+#define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32)
+
+struct bss_bcn_stats {
+ __le32 vdev_id;
+ __le32 bss_bcnsdropped;
+ __le32 bss_bcnsdelivered;
+} __packed;
+
+struct bcn_filter_stats {
+ __le32 bcns_dropped;
+ __le32 bcns_delivered;
+ __le32 activefilters;
+ struct bss_bcn_stats bss_stats;
+} __packed;
+
+struct wmi_add_bcn_filter_cmd {
+ u32 vdev_id;
+ u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST];
+} __packed;
+
+enum wmi_sta_keepalive_method {
+ WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1,
+ WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2,
+};
+
+#define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0
+
+/* Firmware crashes if keepalive interval exceeds this limit */
+#define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff
+
+/* note: ip4 addresses are in network byte order, i.e. big endian */
+struct wmi_sta_keepalive_arp_resp {
+ __be32 src_ip4_addr;
+ __be32 dest_ip4_addr;
+ struct wmi_mac_addr dest_mac_addr;
+} __packed;
+
+struct wmi_sta_keepalive_cmd {
+ __le32 vdev_id;
+ __le32 enabled;
+ __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */
+ __le32 interval; /* in seconds */
+ struct wmi_sta_keepalive_arp_resp arp_resp;
+} __packed;
+
+struct wmi_sta_keepalive_arg {
+ u32 vdev_id;
+ u32 enabled;
+ u32 method;
+ u32 interval;
+ __be32 src_ip4_addr;
+ __be32 dest_ip4_addr;
+ const u8 dest_mac_addr[ETH_ALEN];
+};
+
+enum wmi_force_fw_hang_type {
+ WMI_FORCE_FW_HANG_ASSERT = 1,
+ WMI_FORCE_FW_HANG_NO_DETECT,
+ WMI_FORCE_FW_HANG_CTRL_EP_FULL,
+ WMI_FORCE_FW_HANG_EMPTY_POINT,
+ WMI_FORCE_FW_HANG_STACK_OVERFLOW,
+ WMI_FORCE_FW_HANG_INFINITE_LOOP,
+};
+
+#define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF
+
+struct wmi_force_fw_hang_cmd {
+ __le32 type;
+ __le32 delay_ms;
+} __packed;
+
+enum ath10k_dbglog_level {
+ ATH10K_DBGLOG_LEVEL_VERBOSE = 0,
+ ATH10K_DBGLOG_LEVEL_INFO = 1,
+ ATH10K_DBGLOG_LEVEL_WARN = 2,
+ ATH10K_DBGLOG_LEVEL_ERR = 3,
+};
+
+/* VAP ids to enable dbglog */
+#define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0
+#define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff
+
+/* to enable dbglog in the firmware */
+#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16
+#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000
+
+/* timestamp resolution */
+#define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17
+#define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000
+
+/* number of queued messages before sending them to the host */
+#define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20
+#define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000
+
+/*
+ * Log levels to enable. This defines the minimum level to enable, this is
+ * not a bitmask. See enum ath10k_dbglog_level for the values.
+ */
+#define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28
+#define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000
+
+/*
+ * Note: this is a cleaned up version of a struct firmware uses. For
+ * example, config_valid was hidden inside an array.
+ */
+struct wmi_dbglog_cfg_cmd {
+ /* bitmask to hold mod id config*/
+ __le32 module_enable;
+
+ /* see ATH10K_DBGLOG_CFG_ */
+ __le32 config_enable;
+
+ /* mask of module id bits to be changed */
+ __le32 module_valid;
+
+ /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
+ __le32 config_valid;
+} __packed;
+
+struct wmi_10_4_dbglog_cfg_cmd {
+ /* bitmask to hold mod id config*/
+ __le64 module_enable;
+
+ /* see ATH10K_DBGLOG_CFG_ */
+ __le32 config_enable;
+
+ /* mask of module id bits to be changed */
+ __le64 module_valid;
+
+ /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
+ __le32 config_valid;
+} __packed;
+
+enum wmi_roam_reason {
+ WMI_ROAM_REASON_BETTER_AP = 1,
+ WMI_ROAM_REASON_BEACON_MISS = 2,
+ WMI_ROAM_REASON_LOW_RSSI = 3,
+ WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4,
+ WMI_ROAM_REASON_HO_FAILED = 5,
+
+ /* keep last */
+ WMI_ROAM_REASON_MAX,
+};
+
+struct wmi_roam_ev {
+ __le32 vdev_id;
+ __le32 reason;
+} __packed;
+
+#define ATH10K_FRAGMT_THRESHOLD_MIN 540
+#define ATH10K_FRAGMT_THRESHOLD_MAX 2346
+
+#define WMI_MAX_EVENT 0x1000
+/* Maximum number of pending TXed WMI packets */
+#define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr)
+
+/* By default disable power save for IBSS */
+#define ATH10K_DEFAULT_ATIM 0
+
+#define WMI_MAX_MEM_REQS 16
+
+struct wmi_scan_ev_arg {
+ __le32 event_type; /* %WMI_SCAN_EVENT_ */
+ __le32 reason; /* %WMI_SCAN_REASON_ */
+ __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
+ __le32 scan_req_id;
+ __le32 scan_id;
+ __le32 vdev_id;
+};
+
+struct wmi_mgmt_rx_ev_arg {
+ __le32 channel;
+ __le32 snr;
+ __le32 rate;
+ __le32 phy_mode;
+ __le32 buf_len;
+ __le32 status; /* %WMI_RX_STATUS_ */
+ struct wmi_mgmt_rx_ext_info ext_info;
+};
+
+struct wmi_ch_info_ev_arg {
+ __le32 err_code;
+ __le32 freq;
+ __le32 cmd_flags;
+ __le32 noise_floor;
+ __le32 rx_clear_count;
+ __le32 cycle_count;
+ __le32 chan_tx_pwr_range;
+ __le32 chan_tx_pwr_tp;
+ __le32 rx_frame_count;
+};
+
+struct wmi_vdev_start_ev_arg {
+ __le32 vdev_id;
+ __le32 req_id;
+ __le32 resp_type; /* %WMI_VDEV_RESP_ */
+ __le32 status;
+};
+
+struct wmi_peer_kick_ev_arg {
+ const u8 *mac_addr;
+};
+
+struct wmi_swba_ev_arg {
+ __le32 vdev_map;
+ struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV];
+ const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV];
+};
+
+struct wmi_phyerr_ev_arg {
+ u32 tsf_timestamp;
+ u16 freq1;
+ u16 freq2;
+ u8 rssi_combined;
+ u8 chan_width_mhz;
+ u8 phy_err_code;
+ u16 nf_chains[4];
+ u32 buf_len;
+ const u8 *buf;
+ u8 hdr_len;
+};
+
+struct wmi_phyerr_hdr_arg {
+ u32 num_phyerrs;
+ u32 tsf_l32;
+ u32 tsf_u32;
+ u32 buf_len;
+ const void *phyerrs;
+};
+
+struct wmi_svc_rdy_ev_arg {
+ __le32 min_tx_power;
+ __le32 max_tx_power;
+ __le32 ht_cap;
+ __le32 vht_cap;
+ __le32 sw_ver0;
+ __le32 sw_ver1;
+ __le32 fw_build;
+ __le32 phy_capab;
+ __le32 num_rf_chains;
+ __le32 eeprom_rd;
+ __le32 num_mem_reqs;
+ __le32 low_5ghz_chan;
+ __le32 high_5ghz_chan;
+ const __le32 *service_map;
+ size_t service_map_len;
+ const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS];
+};
+
+struct wmi_rdy_ev_arg {
+ __le32 sw_version;
+ __le32 abi_version;
+ __le32 status;
+ const u8 *mac_addr;
+};
+
+struct wmi_roam_ev_arg {
+ __le32 vdev_id;
+ __le32 reason;
+ __le32 rssi;
+};
+
+struct wmi_echo_ev_arg {
+ __le32 value;
+};
+
+struct wmi_pdev_temperature_event {
+ /* temperature value in Celcius degree */
+ __le32 temperature;
+} __packed;
+
+struct wmi_pdev_bss_chan_info_event {
+ __le32 freq;
+ __le32 noise_floor;
+ __le64 cycle_busy;
+ __le64 cycle_total;
+ __le64 cycle_tx;
+ __le64 cycle_rx;
+ __le64 cycle_rx_bss;
+ __le32 reserved;
+} __packed;
+
+/* WOW structures */
+enum wmi_wow_wakeup_event {
+ WOW_BMISS_EVENT = 0,
+ WOW_BETTER_AP_EVENT,
+ WOW_DEAUTH_RECVD_EVENT,
+ WOW_MAGIC_PKT_RECVD_EVENT,
+ WOW_GTK_ERR_EVENT,
+ WOW_FOURWAY_HSHAKE_EVENT,
+ WOW_EAPOL_RECVD_EVENT,
+ WOW_NLO_DETECTED_EVENT,
+ WOW_DISASSOC_RECVD_EVENT,
+ WOW_PATTERN_MATCH_EVENT,
+ WOW_CSA_IE_EVENT,
+ WOW_PROBE_REQ_WPS_IE_EVENT,
+ WOW_AUTH_REQ_EVENT,
+ WOW_ASSOC_REQ_EVENT,
+ WOW_HTT_EVENT,
+ WOW_RA_MATCH_EVENT,
+ WOW_HOST_AUTO_SHUTDOWN_EVENT,
+ WOW_IOAC_MAGIC_EVENT,
+ WOW_IOAC_SHORT_EVENT,
+ WOW_IOAC_EXTEND_EVENT,
+ WOW_IOAC_TIMER_EVENT,
+ WOW_DFS_PHYERR_RADAR_EVENT,
+ WOW_BEACON_EVENT,
+ WOW_CLIENT_KICKOUT_EVENT,
+ WOW_EVENT_MAX,
+};
+
+#define C2S(x) case x: return #x
+
+static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev)
+{
+ switch (ev) {
+ C2S(WOW_BMISS_EVENT);
+ C2S(WOW_BETTER_AP_EVENT);
+ C2S(WOW_DEAUTH_RECVD_EVENT);
+ C2S(WOW_MAGIC_PKT_RECVD_EVENT);
+ C2S(WOW_GTK_ERR_EVENT);
+ C2S(WOW_FOURWAY_HSHAKE_EVENT);
+ C2S(WOW_EAPOL_RECVD_EVENT);
+ C2S(WOW_NLO_DETECTED_EVENT);
+ C2S(WOW_DISASSOC_RECVD_EVENT);
+ C2S(WOW_PATTERN_MATCH_EVENT);
+ C2S(WOW_CSA_IE_EVENT);
+ C2S(WOW_PROBE_REQ_WPS_IE_EVENT);
+ C2S(WOW_AUTH_REQ_EVENT);
+ C2S(WOW_ASSOC_REQ_EVENT);
+ C2S(WOW_HTT_EVENT);
+ C2S(WOW_RA_MATCH_EVENT);
+ C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT);
+ C2S(WOW_IOAC_MAGIC_EVENT);
+ C2S(WOW_IOAC_SHORT_EVENT);
+ C2S(WOW_IOAC_EXTEND_EVENT);
+ C2S(WOW_IOAC_TIMER_EVENT);
+ C2S(WOW_DFS_PHYERR_RADAR_EVENT);
+ C2S(WOW_BEACON_EVENT);
+ C2S(WOW_CLIENT_KICKOUT_EVENT);
+ C2S(WOW_EVENT_MAX);
+ default:
+ return NULL;
+ }
+}
+
+enum wmi_wow_wake_reason {
+ WOW_REASON_UNSPECIFIED = -1,
+ WOW_REASON_NLOD = 0,
+ WOW_REASON_AP_ASSOC_LOST,
+ WOW_REASON_LOW_RSSI,
+ WOW_REASON_DEAUTH_RECVD,
+ WOW_REASON_DISASSOC_RECVD,
+ WOW_REASON_GTK_HS_ERR,
+ WOW_REASON_EAP_REQ,
+ WOW_REASON_FOURWAY_HS_RECV,
+ WOW_REASON_TIMER_INTR_RECV,
+ WOW_REASON_PATTERN_MATCH_FOUND,
+ WOW_REASON_RECV_MAGIC_PATTERN,
+ WOW_REASON_P2P_DISC,
+ WOW_REASON_WLAN_HB,
+ WOW_REASON_CSA_EVENT,
+ WOW_REASON_PROBE_REQ_WPS_IE_RECV,
+ WOW_REASON_AUTH_REQ_RECV,
+ WOW_REASON_ASSOC_REQ_RECV,
+ WOW_REASON_HTT_EVENT,
+ WOW_REASON_RA_MATCH,
+ WOW_REASON_HOST_AUTO_SHUTDOWN,
+ WOW_REASON_IOAC_MAGIC_EVENT,
+ WOW_REASON_IOAC_SHORT_EVENT,
+ WOW_REASON_IOAC_EXTEND_EVENT,
+ WOW_REASON_IOAC_TIMER_EVENT,
+ WOW_REASON_ROAM_HO,
+ WOW_REASON_DFS_PHYERR_RADADR_EVENT,
+ WOW_REASON_BEACON_RECV,
+ WOW_REASON_CLIENT_KICKOUT_EVENT,
+ WOW_REASON_DEBUG_TEST = 0xFF,
+};
+
+static inline const char *wow_reason(enum wmi_wow_wake_reason reason)
+{
+ switch (reason) {
+ C2S(WOW_REASON_UNSPECIFIED);
+ C2S(WOW_REASON_NLOD);
+ C2S(WOW_REASON_AP_ASSOC_LOST);
+ C2S(WOW_REASON_LOW_RSSI);
+ C2S(WOW_REASON_DEAUTH_RECVD);
+ C2S(WOW_REASON_DISASSOC_RECVD);
+ C2S(WOW_REASON_GTK_HS_ERR);
+ C2S(WOW_REASON_EAP_REQ);
+ C2S(WOW_REASON_FOURWAY_HS_RECV);
+ C2S(WOW_REASON_TIMER_INTR_RECV);
+ C2S(WOW_REASON_PATTERN_MATCH_FOUND);
+ C2S(WOW_REASON_RECV_MAGIC_PATTERN);
+ C2S(WOW_REASON_P2P_DISC);
+ C2S(WOW_REASON_WLAN_HB);
+ C2S(WOW_REASON_CSA_EVENT);
+ C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV);
+ C2S(WOW_REASON_AUTH_REQ_RECV);
+ C2S(WOW_REASON_ASSOC_REQ_RECV);
+ C2S(WOW_REASON_HTT_EVENT);
+ C2S(WOW_REASON_RA_MATCH);
+ C2S(WOW_REASON_HOST_AUTO_SHUTDOWN);
+ C2S(WOW_REASON_IOAC_MAGIC_EVENT);
+ C2S(WOW_REASON_IOAC_SHORT_EVENT);
+ C2S(WOW_REASON_IOAC_EXTEND_EVENT);
+ C2S(WOW_REASON_IOAC_TIMER_EVENT);
+ C2S(WOW_REASON_ROAM_HO);
+ C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT);
+ C2S(WOW_REASON_BEACON_RECV);
+ C2S(WOW_REASON_CLIENT_KICKOUT_EVENT);
+ C2S(WOW_REASON_DEBUG_TEST);
+ default:
+ return NULL;
+ }
+}
+
+#undef C2S
+
+struct wmi_wow_ev_arg {
+ u32 vdev_id;
+ u32 flag;
+ enum wmi_wow_wake_reason wake_reason;
+ u32 data_len;
+};
+
+#define WOW_MIN_PATTERN_SIZE 1
+#define WOW_MAX_PATTERN_SIZE 148
+#define WOW_MAX_PKT_OFFSET 128
+
+enum wmi_tdls_state {
+ WMI_TDLS_DISABLE,
+ WMI_TDLS_ENABLE_PASSIVE,
+ WMI_TDLS_ENABLE_ACTIVE,
+};
+
+enum wmi_tdls_peer_state {
+ WMI_TDLS_PEER_STATE_PEERING,
+ WMI_TDLS_PEER_STATE_CONNECTED,
+ WMI_TDLS_PEER_STATE_TEARDOWN,
+};
+
+struct wmi_tdls_peer_update_cmd_arg {
+ u32 vdev_id;
+ enum wmi_tdls_peer_state peer_state;
+ u8 addr[ETH_ALEN];
+};
+
+#define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32
+
+#define WMI_TDLS_PEER_SP_MASK 0x60
+#define WMI_TDLS_PEER_SP_LSB 5
+
+enum wmi_tdls_options {
+ WMI_TDLS_OFFCHAN_EN = BIT(0),
+ WMI_TDLS_BUFFER_STA_EN = BIT(1),
+ WMI_TDLS_SLEEP_STA_EN = BIT(2),
+};
+
+enum {
+ WMI_TDLS_PEER_QOS_AC_VO = BIT(0),
+ WMI_TDLS_PEER_QOS_AC_VI = BIT(1),
+ WMI_TDLS_PEER_QOS_AC_BK = BIT(2),
+ WMI_TDLS_PEER_QOS_AC_BE = BIT(3),
+};
+
+struct wmi_tdls_peer_capab_arg {
+ u8 peer_uapsd_queues;
+ u8 peer_max_sp;
+ u32 buff_sta_support;
+ u32 off_chan_support;
+ u32 peer_curr_operclass;
+ u32 self_curr_operclass;
+ u32 peer_chan_len;
+ u32 peer_operclass_len;
+ u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
+ u32 is_peer_responder;
+ u32 pref_offchan_num;
+ u32 pref_offchan_bw;
+};
+
+struct wmi_10_4_tdls_set_state_cmd {
+ __le32 vdev_id;
+ __le32 state;
+ __le32 notification_interval_ms;
+ __le32 tx_discovery_threshold;
+ __le32 tx_teardown_threshold;
+ __le32 rssi_teardown_threshold;
+ __le32 rssi_delta;
+ __le32 tdls_options;
+ __le32 tdls_peer_traffic_ind_window;
+ __le32 tdls_peer_traffic_response_timeout_ms;
+ __le32 tdls_puapsd_mask;
+ __le32 tdls_puapsd_inactivity_time_ms;
+ __le32 tdls_puapsd_rx_frame_threshold;
+ __le32 teardown_notification_ms;
+ __le32 tdls_peer_kickout_threshold;
+} __packed;
+
+struct wmi_tdls_peer_capabilities {
+ __le32 peer_qos;
+ __le32 buff_sta_support;
+ __le32 off_chan_support;
+ __le32 peer_curr_operclass;
+ __le32 self_curr_operclass;
+ __le32 peer_chan_len;
+ __le32 peer_operclass_len;
+ u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
+ __le32 is_peer_responder;
+ __le32 pref_offchan_num;
+ __le32 pref_offchan_bw;
+ struct wmi_channel peer_chan_list[1];
+} __packed;
+
+struct wmi_10_4_tdls_peer_update_cmd {
+ __le32 vdev_id;
+ struct wmi_mac_addr peer_macaddr;
+ __le32 peer_state;
+ __le32 reserved[4];
+ struct wmi_tdls_peer_capabilities peer_capab;
+} __packed;
+
+enum wmi_tdls_peer_reason {
+ WMI_TDLS_TEARDOWN_REASON_TX,
+ WMI_TDLS_TEARDOWN_REASON_RSSI,
+ WMI_TDLS_TEARDOWN_REASON_SCAN,
+ WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE,
+ WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT,
+ WMI_TDLS_TEARDOWN_REASON_BAD_PTR,
+ WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE,
+ WMI_TDLS_ENTER_BUF_STA,
+ WMI_TDLS_EXIT_BUF_STA,
+ WMI_TDLS_ENTER_BT_BUSY_MODE,
+ WMI_TDLS_EXIT_BT_BUSY_MODE,
+ WMI_TDLS_SCAN_STARTED_EVENT,
+ WMI_TDLS_SCAN_COMPLETED_EVENT,
+};
+
+enum wmi_tdls_peer_notification {
+ WMI_TDLS_SHOULD_DISCOVER,
+ WMI_TDLS_SHOULD_TEARDOWN,
+ WMI_TDLS_PEER_DISCONNECTED,
+ WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION,
+};
+
+struct wmi_tdls_peer_event {
+ struct wmi_mac_addr peer_macaddr;
+ /* see enum wmi_tdls_peer_notification*/
+ __le32 peer_status;
+ /* see enum wmi_tdls_peer_reason */
+ __le32 peer_reason;
+ __le32 vdev_id;
+} __packed;
+
+enum wmi_txbf_conf {
+ WMI_TXBF_CONF_UNSUPPORTED,
+ WMI_TXBF_CONF_BEFORE_ASSOC,
+ WMI_TXBF_CONF_AFTER_ASSOC,
+};
+
+#define WMI_CCA_DETECT_LEVEL_AUTO 0
+#define WMI_CCA_DETECT_MARGIN_AUTO 0
+
+struct wmi_pdev_set_adaptive_cca_params {
+ __le32 enable;
+ __le32 cca_detect_level;
+ __le32 cca_detect_margin;
+} __packed;
+
+enum wmi_host_platform_type {
+ WMI_HOST_PLATFORM_HIGH_PERF,
+ WMI_HOST_PLATFORM_LOW_PERF,
+};
+
+enum wmi_bss_survey_req_type {
+ WMI_BSS_SURVEY_REQ_TYPE_READ = 1,
+ WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR,
+};
+
+struct wmi_pdev_chan_info_req_cmd {
+ __le32 type;
+ __le32 reserved;
+} __packed;
+
+struct ath10k;
+struct ath10k_vif;
+struct ath10k_fw_stats_pdev;
+struct ath10k_fw_stats_peer;
+struct ath10k_fw_stats;
+
+int ath10k_wmi_attach(struct ath10k *ar);
+void ath10k_wmi_detach(struct ath10k *ar);
+void ath10k_wmi_free_host_mem(struct ath10k *ar);
+int ath10k_wmi_wait_for_service_ready(struct ath10k *ar);
+int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar);
+
+struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
+int ath10k_wmi_connect(struct ath10k *ar);
+
+struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
+int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
+int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb,
+ u32 cmd_id);
+void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg);
+
+void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src,
+ struct ath10k_fw_stats_pdev *dst);
+void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src,
+ struct ath10k_fw_stats_pdev *dst);
+void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src,
+ struct ath10k_fw_stats_pdev *dst);
+void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src,
+ struct ath10k_fw_stats_pdev *dst);
+void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src,
+ struct ath10k_fw_stats_peer *dst);
+void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar,
+ struct wmi_host_mem_chunks *chunks);
+void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn,
+ const struct wmi_start_scan_arg *arg);
+void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params,
+ const struct wmi_wmm_params_arg *arg);
+void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch,
+ const struct wmi_channel_arg *arg);
+int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg);
+
+int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb);
+int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb);
+int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_dfs(struct ath10k *ar,
+ struct wmi_phyerr_ev_arg *phyerr, u64 tsf);
+void ath10k_wmi_event_spectral_scan(struct ath10k *ar,
+ struct wmi_phyerr_ev_arg *phyerr,
+ u64 tsf);
+void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar,
+ struct sk_buff *skb);
+void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar,
+ struct sk_buff *skb);
+void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar,
+ struct sk_buff *skb);
+void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar,
+ struct sk_buff *skb);
+void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb);
+void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb);
+int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb);
+int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf,
+ int left_len, struct wmi_phyerr_ev_arg *arg);
+void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar,
+ struct ath10k_fw_stats *fw_stats,
+ char *buf);
+void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar,
+ struct ath10k_fw_stats *fw_stats,
+ char *buf);
+size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head);
+size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head);
+void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar,
+ struct ath10k_fw_stats *fw_stats,
+ char *buf);
+int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar,
+ enum wmi_vdev_subtype subtype);
+int ath10k_wmi_barrier(struct ath10k *ar);
+
+#endif /* _WMI_H_ */