1 files changed, 350 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/wil6210/pm.c b/drivers/net/wireless/ath/wil6210/pm.c
new file mode 100644
index 0000000..8f5d1b4
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/pm.c
@@ -0,0 +1,350 @@
+/*
+ * Copyright (c) 2014,2017 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "wil6210.h"
+#include <linux/jiffies.h>
+
+int wil_can_suspend(struct wil6210_priv *wil, bool is_runtime)
+{
+	int rc = 0;
+	struct wireless_dev *wdev = wil->wdev;
+	struct net_device *ndev = wil_to_ndev(wil);
+
+	wil_dbg_pm(wil, "can_suspend: %s\n", is_runtime ? "runtime" : "system");
+
+	if (!(ndev->flags & IFF_UP)) {
+		/* can always sleep when down */
+		wil_dbg_pm(wil, "Interface is down\n");
+		goto out;
+	}
+	if (test_bit(wil_status_resetting, wil->status)) {
+		wil_dbg_pm(wil, "Delay suspend when resetting\n");
+		rc = -EBUSY;
+		goto out;
+	}
+	if (wil->recovery_state != fw_recovery_idle) {
+		wil_dbg_pm(wil, "Delay suspend during recovery\n");
+		rc = -EBUSY;
+		goto out;
+	}
+
+	/* interface is running */
+	switch (wdev->iftype) {
+	case NL80211_IFTYPE_MONITOR:
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_P2P_CLIENT:
+		if (test_bit(wil_status_fwconnecting, wil->status)) {
+			wil_dbg_pm(wil, "Delay suspend when connecting\n");
+			rc = -EBUSY;
+			goto out;
+		}
+		break;
+	/* AP-like interface - can't suspend */
+	default:
+		wil_dbg_pm(wil, "AP-like interface\n");
+		rc = -EBUSY;
+		break;
+	}
+
+out:
+	wil_dbg_pm(wil, "can_suspend: %s => %s (%d)\n",
+		   is_runtime ? "runtime" : "system", rc ? "No" : "Yes", rc);
+
+	if (rc)
+		wil->suspend_stats.rejected_by_host++;
+
+	return rc;
+}
+
+static int wil_resume_keep_radio_on(struct wil6210_priv *wil)
+{
+	int rc = 0;
+
+	/* wil_status_resuming will be cleared when getting
+	 * WMI_TRAFFIC_RESUME_EVENTID
+	 */
+	set_bit(wil_status_resuming, wil->status);
+	clear_bit(wil_status_suspended, wil->status);
+	wil_c(wil, RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD);
+	wil_unmask_irq(wil);
+
+	wil6210_bus_request(wil, wil->bus_request_kbps_pre_suspend);
+
+	/* Send WMI resume request to the device */
+	rc = wmi_resume(wil);
+	if (rc) {
+		wil_err(wil, "device failed to resume (%d)\n", rc);
+		if (no_fw_recovery)
+			goto out;
+		rc = wil_down(wil);
+		if (rc) {
+			wil_err(wil, "wil_down failed (%d)\n", rc);
+			goto out;
+		}
+		rc = wil_up(wil);
+		if (rc) {
+			wil_err(wil, "wil_up failed (%d)\n", rc);
+			goto out;
+		}
+	}
+
+	/* Wake all queues */
+	if (test_bit(wil_status_fwconnected, wil->status))
+		wil_update_net_queues_bh(wil, NULL, false);
+
+out:
+	if (rc)
+		set_bit(wil_status_suspended, wil->status);
+	return rc;
+}
+
+static int wil_suspend_keep_radio_on(struct wil6210_priv *wil)
+{
+	int rc = 0;
+	unsigned long start, data_comp_to;
+
+	wil_dbg_pm(wil, "suspend keep radio on\n");
+
+	/* Prevent handling of new tx and wmi commands */
+	set_bit(wil_status_suspending, wil->status);
+	wil_update_net_queues_bh(wil, NULL, true);
+
+	if (!wil_is_tx_idle(wil)) {
+		wil_dbg_pm(wil, "Pending TX data, reject suspend\n");
+		wil->suspend_stats.rejected_by_host++;
+		goto reject_suspend;
+	}
+
+	if (!wil_is_rx_idle(wil)) {
+		wil_dbg_pm(wil, "Pending RX data, reject suspend\n");
+		wil->suspend_stats.rejected_by_host++;
+		goto reject_suspend;
+	}
+
+	if (!wil_is_wmi_idle(wil)) {
+		wil_dbg_pm(wil, "Pending WMI events, reject suspend\n");
+		wil->suspend_stats.rejected_by_host++;
+		goto reject_suspend;
+	}
+
+	/* Send WMI suspend request to the device */
+	rc = wmi_suspend(wil);
+	if (rc) {
+		wil_dbg_pm(wil, "wmi_suspend failed, reject suspend (%d)\n",
+			   rc);
+		goto reject_suspend;
+	}
+
+	/* Wait for completion of the pending RX packets */
+	start = jiffies;
+	data_comp_to = jiffies + msecs_to_jiffies(WIL_DATA_COMPLETION_TO_MS);
+	if (test_bit(wil_status_napi_en, wil->status)) {
+		while (!wil_is_rx_idle(wil)) {
+			if (time_after(jiffies, data_comp_to)) {
+				if (wil_is_rx_idle(wil))
+					break;
+				wil_err(wil,
+					"TO waiting for idle RX, suspend failed\n");
+				wil->suspend_stats.failed_suspends++;
+				goto resume_after_fail;
+			}
+			wil_dbg_ratelimited(wil, "rx vring is not empty -> NAPI\n");
+			napi_synchronize(&wil->napi_rx);
+			msleep(20);
+		}
+	}
+
+	/* In case of pending WMI events, reject the suspend
+	 * and resume the device.
+	 * This can happen if the device sent the WMI events before
+	 * approving the suspend.
+	 */
+	if (!wil_is_wmi_idle(wil)) {
+		wil_err(wil, "suspend failed due to pending WMI events\n");
+		wil->suspend_stats.failed_suspends++;
+		goto resume_after_fail;
+	}
+
+	wil_mask_irq(wil);
+
+	/* Disable device reset on PERST */
+	wil_s(wil, RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD);
+
+	if (wil->platform_ops.suspend) {
+		rc = wil->platform_ops.suspend(wil->platform_handle, true);
+		if (rc) {
+			wil_err(wil, "platform device failed to suspend (%d)\n",
+				rc);
+			wil->suspend_stats.failed_suspends++;
+			wil_c(wil, RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD);
+			wil_unmask_irq(wil);
+			goto resume_after_fail;
+		}
+	}
+
+	/* Save the current bus request to return to the same in resume */
+	wil->bus_request_kbps_pre_suspend = wil->bus_request_kbps;
+	wil6210_bus_request(wil, 0);
+
+	set_bit(wil_status_suspended, wil->status);
+	clear_bit(wil_status_suspending, wil->status);
+
+	return rc;
+
+resume_after_fail:
+	set_bit(wil_status_resuming, wil->status);
+	clear_bit(wil_status_suspending, wil->status);
+	rc = wmi_resume(wil);
+	/* if resume succeeded, reject the suspend */
+	if (!rc) {
+		rc = -EBUSY;
+		if (test_bit(wil_status_fwconnected, wil->status))
+			wil_update_net_queues_bh(wil, NULL, false);
+	}
+	return rc;
+
+reject_suspend:
+	clear_bit(wil_status_suspending, wil->status);
+	if (test_bit(wil_status_fwconnected, wil->status))
+		wil_update_net_queues_bh(wil, NULL, false);
+	return -EBUSY;
+}
+
+static int wil_suspend_radio_off(struct wil6210_priv *wil)
+{
+	int rc = 0;
+	struct net_device *ndev = wil_to_ndev(wil);
+
+	wil_dbg_pm(wil, "suspend radio off\n");
+
+	/* if netif up, hardware is alive, shut it down */
+	if (ndev->flags & IFF_UP) {
+		rc = wil_down(wil);
+		if (rc) {
+			wil_err(wil, "wil_down : %d\n", rc);
+			goto out;
+		}
+	}
+
+	/* Disable PCIe IRQ to prevent sporadic IRQs when PCIe is suspending */
+	wil_dbg_pm(wil, "Disabling PCIe IRQ before suspending\n");
+	wil_disable_irq(wil);
+
+	if (wil->platform_ops.suspend) {
+		rc = wil->platform_ops.suspend(wil->platform_handle, false);
+		if (rc) {
+			wil_enable_irq(wil);
+			goto out;
+		}
+	}
+
+	set_bit(wil_status_suspended, wil->status);
+
+out:
+	wil_dbg_pm(wil, "suspend radio off: %d\n", rc);
+
+	return rc;
+}
+
+static int wil_resume_radio_off(struct wil6210_priv *wil)
+{
+	int rc = 0;
+	struct net_device *ndev = wil_to_ndev(wil);
+
+	wil_dbg_pm(wil, "Enabling PCIe IRQ\n");
+	wil_enable_irq(wil);
+	/* if netif up, bring hardware up
+	 * During open(), IFF_UP set after actual device method
+	 * invocation. This prevent recursive call to wil_up()
+	 * wil_status_suspended will be cleared in wil_reset
+	 */
+	if (ndev->flags & IFF_UP)
+		rc = wil_up(wil);
+	else
+		clear_bit(wil_status_suspended, wil->status);
+
+	return rc;
+}
+
+int wil_suspend(struct wil6210_priv *wil, bool is_runtime)
+{
+	int rc = 0;
+	struct net_device *ndev = wil_to_ndev(wil);
+	bool keep_radio_on = ndev->flags & IFF_UP &&
+			     wil->keep_radio_on_during_sleep;
+
+	wil_dbg_pm(wil, "suspend: %s\n", is_runtime ? "runtime" : "system");
+
+	if (test_bit(wil_status_suspended, wil->status)) {
+		wil_dbg_pm(wil, "trying to suspend while suspended\n");
+		return 0;
+	}
+
+	if (!keep_radio_on)
+		rc = wil_suspend_radio_off(wil);
+	else
+		rc = wil_suspend_keep_radio_on(wil);
+
+	wil_dbg_pm(wil, "suspend: %s => %d\n",
+		   is_runtime ? "runtime" : "system", rc);
+
+	if (!rc)
+		wil->suspend_stats.suspend_start_time = ktime_get();
+
+	return rc;
+}
+
+int wil_resume(struct wil6210_priv *wil, bool is_runtime)
+{
+	int rc = 0;
+	struct net_device *ndev = wil_to_ndev(wil);
+	bool keep_radio_on = ndev->flags & IFF_UP &&
+			     wil->keep_radio_on_during_sleep;
+	unsigned long long suspend_time_usec = 0;
+
+	wil_dbg_pm(wil, "resume: %s\n", is_runtime ? "runtime" : "system");
+
+	if (wil->platform_ops.resume) {
+		rc = wil->platform_ops.resume(wil->platform_handle,
+					      keep_radio_on);
+		if (rc) {
+			wil_err(wil, "platform_ops.resume : %d\n", rc);
+			goto out;
+		}
+	}
+
+	if (keep_radio_on)
+		rc = wil_resume_keep_radio_on(wil);
+	else
+		rc = wil_resume_radio_off(wil);
+
+	if (rc)
+		goto out;
+
+	suspend_time_usec =
+		ktime_to_us(ktime_sub(ktime_get(),
+				      wil->suspend_stats.suspend_start_time));
+	wil->suspend_stats.total_suspend_time += suspend_time_usec;
+	if (suspend_time_usec < wil->suspend_stats.min_suspend_time)
+		wil->suspend_stats.min_suspend_time = suspend_time_usec;
+	if (suspend_time_usec > wil->suspend_stats.max_suspend_time)
+		wil->suspend_stats.max_suspend_time = suspend_time_usec;
+
+out:
+	wil_dbg_pm(wil, "resume: %s => %d, suspend time %lld usec\n",
+		   is_runtime ? "runtime" : "system", rc, suspend_time_usec);
+	return rc;
+}