diff options
Diffstat (limited to 'drivers/net/wireless/ath/wil6210/txrx_edma.h')
| -rw-r--r-- | drivers/net/wireless/ath/wil6210/txrx_edma.h | 568 |
1 files changed, 568 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/wil6210/txrx_edma.h b/drivers/net/wireless/ath/wil6210/txrx_edma.h new file mode 100644 index 0000000..a7fe929 --- /dev/null +++ b/drivers/net/wireless/ath/wil6210/txrx_edma.h @@ -0,0 +1,568 @@ +/* + * Copyright (c) 2012-2016,2018, The Linux Foundation. All rights reserved. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef WIL6210_TXRX_EDMA_H +#define WIL6210_TXRX_EDMA_H + +#include "wil6210.h" + +/* limit status ring size in range [ring size..max ring size] */ +#define WIL_SRING_SIZE_ORDER_MIN (WIL_RING_SIZE_ORDER_MIN) +#define WIL_SRING_SIZE_ORDER_MAX (WIL_RING_SIZE_ORDER_MAX) +/* RX sring order should be bigger than RX ring order */ +#define WIL_RX_SRING_SIZE_ORDER_DEFAULT (11) +#define WIL_TX_SRING_SIZE_ORDER_DEFAULT (12) +#define WIL_RX_BUFF_ARR_SIZE_DEFAULT (1536) + +#define WIL_DEFAULT_RX_STATUS_RING_ID 0 +#define WIL_RX_DESC_RING_ID 0 +#define WIL_RX_STATUS_IRQ_IDX 0 +#define WIL_TX_STATUS_IRQ_IDX 1 + +#define WIL_EDMA_AGG_WATERMARK (0xffff) +#define WIL_EDMA_AGG_WATERMARK_POS (16) + +#define WIL_EDMA_IDLE_TIME_LIMIT_USEC (50) +#define WIL_EDMA_TIME_UNIT_CLK_CYCLES (330) /* fits 1 usec */ + +/* Error field */ +#define WIL_RX_EDMA_ERROR_MIC (1) +#define WIL_RX_EDMA_ERROR_KEY (2) /* Key missing */ +#define WIL_RX_EDMA_ERROR_REPLAY (3) +#define WIL_RX_EDMA_ERROR_AMSDU (4) +#define WIL_RX_EDMA_ERROR_FCS (7) + +#define WIL_RX_EDMA_ERROR_L3_ERR (BIT(0) | BIT(1)) +#define WIL_RX_EDMA_ERROR_L4_ERR (BIT(0) | BIT(1)) + +#define WIL_RX_EDMA_DLPF_LU_MISS_BIT BIT(11) +#define WIL_RX_EDMA_DLPF_LU_MISS_CID_TID_MASK 0x7 +#define WIL_RX_EDMA_DLPF_LU_HIT_CID_TID_MASK 0xf + +#define WIL_RX_EDMA_DLPF_LU_MISS_CID_POS 2 +#define WIL_RX_EDMA_DLPF_LU_HIT_CID_POS 4 + +#define WIL_RX_EDMA_DLPF_LU_MISS_TID_POS 5 + +#define WIL_RX_EDMA_MID_VALID_BIT BIT(22) + +#define WIL_EDMA_DESC_TX_MAC_CFG_0_QID_POS 16 +#define WIL_EDMA_DESC_TX_MAC_CFG_0_QID_LEN 6 + +#define WIL_EDMA_DESC_TX_CFG_EOP_POS 0 +#define WIL_EDMA_DESC_TX_CFG_EOP_LEN 1 + +#define WIL_EDMA_DESC_TX_CFG_TSO_DESC_TYPE_POS 3 +#define WIL_EDMA_DESC_TX_CFG_TSO_DESC_TYPE_LEN 2 + +#define WIL_EDMA_DESC_TX_CFG_SEG_EN_POS 5 +#define WIL_EDMA_DESC_TX_CFG_SEG_EN_LEN 1 + +#define WIL_EDMA_DESC_TX_CFG_INSERT_IP_CHKSUM_POS 6 +#define WIL_EDMA_DESC_TX_CFG_INSERT_IP_CHKSUM_LEN 1 + +#define WIL_EDMA_DESC_TX_CFG_INSERT_TCP_CHKSUM_POS 7 +#define WIL_EDMA_DESC_TX_CFG_INSERT_TCP_CHKSUM_LEN 1 + +#define WIL_EDMA_DESC_TX_CFG_L4_TYPE_POS 15 +#define WIL_EDMA_DESC_TX_CFG_L4_TYPE_LEN 1 + +#define WIL_EDMA_DESC_TX_CFG_PSEUDO_HEADER_CALC_EN_POS 5 +#define WIL_EDMA_DESC_TX_CFG_PSEUDO_HEADER_CALC_EN_LEN 1 + +/* Enhanced Rx descriptor - MAC part + * [dword 0] : Reserved + * [dword 1] : Reserved + * [dword 2] : Reserved + * [dword 3] + * bit 0..15 : Buffer ID + * bit 16..31 : Reserved + */ +struct wil_ring_rx_enhanced_mac { + u32 d[3]; + __le16 buff_id; + u16 reserved; +} __packed; + +/* Enhanced Rx descriptor - DMA part + * [dword 0] - Reserved + * [dword 1] + * bit 0..31 : addr_low:32 The payload buffer address, bits 0-31 + * [dword 2] + * bit 0..15 : addr_high_low:16 The payload buffer address, bits 32-47 + * bit 16..31 : Reserved + * [dword 3] + * bit 0..15 : addr_high_high:16 The payload buffer address, bits 48-63 + * bit 16..31 : length + */ +struct wil_ring_rx_enhanced_dma { + u32 d0; + struct wil_ring_dma_addr addr; + u16 w5; + __le16 addr_high_high; + __le16 length; +} __packed; + +struct wil_rx_enhanced_desc { + struct wil_ring_rx_enhanced_mac mac; + struct wil_ring_rx_enhanced_dma dma; +} __packed; + +/* Enhanced Tx descriptor - DMA part + * [dword 0] + * Same as legacy + * [dword 1] + * bit 0..31 : addr_low:32 The payload buffer address, bits 0-31 + * [dword 2] + * bit 0..15 : addr_high_low:16 The payload buffer address, bits 32-47 + * bit 16..23 : ip_length:8 The IP header length for the TX IP checksum + * offload feature + * bit 24..30 : mac_length:7 + * bit 31 : ip_version:1 1 - IPv4, 0 - IPv6 + * [dword 3] + * bit 0..15 : addr_high_high:16 The payload buffer address, bits 48-63 + * bit 16..31 : length + */ +struct wil_ring_tx_enhanced_dma { + u8 l4_hdr_len; + u8 cmd; + u16 w1; + struct wil_ring_dma_addr addr; + u8 ip_length; + u8 b11; /* 0..6: mac_length; 7:ip_version */ + __le16 addr_high_high; + __le16 length; +} __packed; + +/* Enhanced Tx descriptor - MAC part + * [dword 0] + * bit 0.. 9 : lifetime_expiry_value:10 + * bit 10 : interrupt_en:1 + * bit 11 : status_en:1 + * bit 12..13 : txss_override:2 + * bit 14 : timestamp_insertion:1 + * bit 15 : duration_preserve:1 + * bit 16..21 : reserved0:6 + * bit 22..26 : mcs_index:5 + * bit 27 : mcs_en:1 + * bit 28..30 : reserved1:3 + * bit 31 : sn_preserved:1 + * [dword 1] + * bit 0.. 3 : pkt_mode:4 + * bit 4 : pkt_mode_en:1 + * bit 5..14 : reserved0:10 + * bit 15 : ack_policy_en:1 + * bit 16..19 : dst_index:4 + * bit 20 : dst_index_en:1 + * bit 21..22 : ack_policy:2 + * bit 23 : lifetime_en:1 + * bit 24..30 : max_retry:7 + * bit 31 : max_retry_en:1 + * [dword 2] + * bit 0.. 7 : num_of_descriptors:8 + * bit 8..17 : reserved:10 + * bit 18..19 : l2_translation_type:2 00 - bypass, 01 - 802.3, 10 - 802.11 + * bit 20 : snap_hdr_insertion_en:1 + * bit 21 : vlan_removal_en:1 + * bit 22..23 : reserved0:2 + * bit 24 : Dest ID extension:1 + * bit 25..31 : reserved0:7 + * [dword 3] + * bit 0..15 : tso_mss:16 + * bit 16..31 : descriptor_scratchpad:16 - mailbox between driver and ucode + */ +struct wil_ring_tx_enhanced_mac { + u32 d[3]; + __le16 tso_mss; + u16 scratchpad; +} __packed; + +struct wil_tx_enhanced_desc { + struct wil_ring_tx_enhanced_mac mac; + struct wil_ring_tx_enhanced_dma dma; +} __packed; + +#define TX_STATUS_DESC_READY_POS 7 + +/* Enhanced TX status message + * [dword 0] + * bit 0.. 7 : Number of Descriptor:8 - The number of descriptors that + * are used to form the packets. It is needed for WB when + * releasing the packet + * bit 8..15 : tx_ring_id:8 The transmission ring ID that is related to + * the message + * bit 16..23 : Status:8 - The TX status Code + * 0x0 - A successful transmission + * 0x1 - Retry expired + * 0x2 - Lifetime Expired + * 0x3 - Released + * 0x4-0xFF - Reserved + * bit 24..30 : Reserved:7 + * bit 31 : Descriptor Ready bit:1 - It is initiated to + * zero by the driver when the ring is created. It is set by the HW + * to one for each completed status message. Each wrap around, + * the DR bit value is flipped. + * [dword 1] + * bit 0..31 : timestamp:32 - Set when MPDU is transmitted. + * [dword 2] + * bit 0.. 4 : MCS:5 - The transmitted MCS value + * bit 5 : Reserved:1 + * bit 6.. 7 : CB mode:2 - 0-DMG 1-EDMG 2-Wide + * bit 8..12 : QID:5 - The QID that was used for the transmission + * bit 13..15 : Reserved:3 + * bit 16..20 : Num of MSDUs:5 - Number of MSDUs in the aggregation + * bit 21..22 : Reserved:2 + * bit 23 : Retry:1 - An indication that the transmission was retried + * bit 24..31 : TX-Sector:8 - the antenna sector that was used for + * transmission + * [dword 3] + * bit 0..11 : Sequence number:12 - The Sequence Number that was used + * for the MPDU transmission + * bit 12..31 : Reserved:20 + */ +struct wil_ring_tx_status { + u8 num_descriptors; + u8 ring_id; + u8 status; + u8 desc_ready; /* Only the last bit should be set */ + u32 timestamp; + u32 d2; + u16 seq_number; /* Only the first 12 bits */ + u16 w7; +} __packed; + +/* Enhanced Rx status message - compressed part + * [dword 0] + * bit 0.. 2 : L2 Rx Status:3 - The L2 packet reception Status + * 0-Success, 1-MIC Error, 2-Key Error, 3-Replay Error, + * 4-A-MSDU Error, 5-Reserved, 6-Reserved, 7-FCS Error + * bit 3.. 4 : L3 Rx Status:2 - Bit0 - L3I - L3 identified and checksum + * calculated, Bit1- L3Err - IPv4 Checksum Error + * bit 5.. 6 : L4 Rx Status:2 - Bit0 - L4I - L4 identified and checksum + * calculated, Bit1- L4Err - TCP/UDP Checksum Error + * bit 7 : Reserved:1 + * bit 8..19 : Flow ID:12 - MSDU flow ID + * bit 20..21 : MID:2 - The MAC ID + * bit 22 : MID_V:1 - The MAC ID field is valid + * bit 23 : L3T:1 - IP types: 0-IPv6, 1-IPv4 + * bit 24 : L4T:1 - Layer 4 Type: 0-UDP, 1-TCP + * bit 25 : BC:1 - The received MPDU is broadcast + * bit 26 : MC:1 - The received MPDU is multicast + * bit 27 : Raw:1 - The MPDU received with no translation + * bit 28 : Sec:1 - The FC control (b14) - Frame Protected + * bit 29 : Error:1 - An error is set when (L2 status != 0) || + * (L3 status == 3) || (L4 status == 3) + * bit 30 : EOP:1 - End of MSDU signaling. It is set to mark the end + * of the transfer, otherwise the status indicates buffer + * only completion. + * bit 31 : Descriptor Ready bit:1 - It is initiated to + * zero by the driver when the ring is created. It is set + * by the HW to one for each completed status message. + * Each wrap around, the DR bit value is flipped. + * [dword 1] + * bit 0.. 5 : MAC Len:6 - The number of bytes that are used for L2 header + * bit 6..11 : IPLEN:6 - The number of DW that are used for L3 header + * bit 12..15 : I4Len:4 - The number of DW that are used for L4 header + * bit 16..21 : MCS:6 - The received MCS field from the PLCP Header + * bit 22..23 : CB mode:2 - The CB Mode: 0-DMG, 1-EDMG, 2-Wide + * bit 24..27 : Data Offset:4 - The data offset, a code that describe the + * payload shift from the beginning of the buffer: + * 0 - 0 Bytes, 3 - 2 Bytes + * bit 28 : A-MSDU Present:1 - The QoS (b7) A-MSDU present field + * bit 29 : A-MSDU Type:1 The QoS (b8) A-MSDU Type field + * bit 30 : A-MPDU:1 - Packet is part of aggregated MPDU + * bit 31 : Key ID:1 - The extracted Key ID from the encryption header + * [dword 2] + * bit 0..15 : Buffer ID:16 - The Buffer Identifier + * bit 16..31 : Length:16 - It indicates the valid bytes that are stored + * in the current descriptor buffer. For multiple buffer + * descriptor, SW need to sum the total descriptor length + * in all buffers to produce the packet length + * [dword 3] + * bit 0..31 : timestamp:32 - The MPDU Timestamp. + */ +struct wil_rx_status_compressed { + u32 d0; + u32 d1; + __le16 buff_id; + __le16 length; + u32 timestamp; +} __packed; + +/* Enhanced Rx status message - extension part + * [dword 0] + * bit 0.. 4 : QID:5 - The Queue Identifier that the packet is received + * from + * bit 5.. 7 : Reserved:3 + * bit 8..11 : TID:4 - The QoS (b3-0) TID Field + * bit 12..15 Source index:4 - The Source index that was found + during Parsing the TA. This field is used to define the + source of the packet + * bit 16..18 : Destination index:3 - The Destination index that + was found during Parsing the RA. + * bit 19..20 : DS Type:2 - The FC Control (b9-8) - From / To DS + * bit 21..22 : MIC ICR:2 - this signal tells the DMA to assert an + interrupt after it writes the packet + * bit 23 : ESOP:1 - The QoS (b4) ESOP field + * bit 24 : RDG:1 + * bit 25..31 : Reserved:7 + * [dword 1] + * bit 0.. 1 : Frame Type:2 - The FC Control (b3-2) - MPDU Type + (management, data, control and extension) + * bit 2.. 5 : Syb type:4 - The FC Control (b7-4) - Frame Subtype + * bit 6..11 : Ext sub type:6 - The FC Control (b11-8) - Frame Extended + * Subtype + * bit 12..13 : ACK Policy:2 - The QoS (b6-5) ACK Policy fields + * bit 14 : DECRYPT_BYP:1 - The MPDU is bypass by the decryption unit + * bit 15..23 : Reserved:9 + * bit 24..31 : RSSI/SNR:8 - The RSSI / SNR measurement for the received + * MPDU + * [dword 2] + * bit 0..11 : SN:12 - The received Sequence number field + * bit 12..15 : Reserved:4 + * bit 16..31 : PN bits [15:0]:16 + * [dword 3] + * bit 0..31 : PN bits [47:16]:32 + */ +struct wil_rx_status_extension { + u32 d0; + u32 d1; + __le16 seq_num; /* only lower 12 bits */ + u16 pn_15_0; + u32 pn_47_16; +} __packed; + +struct wil_rx_status_extended { + struct wil_rx_status_compressed comp; + struct wil_rx_status_extension ext; +} __packed; + +static inline void *wil_skb_rxstatus(struct sk_buff *skb) +{ + return (void *)skb->cb; +} + +static inline __le16 wil_rx_status_get_length(void *msg) +{ + return ((struct wil_rx_status_compressed *)msg)->length; +} + +static inline u8 wil_rx_status_get_mcs(void *msg) +{ + return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d1, + 16, 21); +} + +static inline u16 wil_rx_status_get_flow_id(void *msg) +{ + return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0, + 8, 19); +} + +static inline u8 wil_rx_status_get_mcast(void *msg) +{ + return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0, + 26, 26); +} + +/** + * In case of DLPF miss the parsing of flow Id should be as follows: + * dest_id:2 + * src_id :3 - cid + * tid:3 + * Otherwise: + * tid:4 + * cid:4 + */ + +static inline u8 wil_rx_status_get_cid(void *msg) +{ + u16 val = wil_rx_status_get_flow_id(msg); + + if (val & WIL_RX_EDMA_DLPF_LU_MISS_BIT) + /* CID is in bits 2..4 */ + return (val >> WIL_RX_EDMA_DLPF_LU_MISS_CID_POS) & + WIL_RX_EDMA_DLPF_LU_MISS_CID_TID_MASK; + else + /* CID is in bits 4..7 */ + return (val >> WIL_RX_EDMA_DLPF_LU_HIT_CID_POS) & + WIL_RX_EDMA_DLPF_LU_HIT_CID_TID_MASK; +} + +static inline u8 wil_rx_status_get_tid(void *msg) +{ + u16 val = wil_rx_status_get_flow_id(msg); + + if (val & WIL_RX_EDMA_DLPF_LU_MISS_BIT) + /* TID is in bits 5..7 */ + return (val >> WIL_RX_EDMA_DLPF_LU_MISS_TID_POS) & + WIL_RX_EDMA_DLPF_LU_MISS_CID_TID_MASK; + else + /* TID is in bits 0..3 */ + return val & WIL_RX_EDMA_DLPF_LU_MISS_CID_TID_MASK; +} + +static inline int wil_rx_status_get_desc_rdy_bit(void *msg) +{ + return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0, + 31, 31); +} + +static inline int wil_rx_status_get_eop(void *msg) /* EoP = End of Packet */ +{ + return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0, + 30, 30); +} + +static inline __le16 wil_rx_status_get_buff_id(void *msg) +{ + return ((struct wil_rx_status_compressed *)msg)->buff_id; +} + +static inline u8 wil_rx_status_get_data_offset(void *msg) +{ + u8 val = WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d1, + 24, 27); + + switch (val) { + case 0: return 0; + case 3: return 2; + default: return 0xFF; + } +} + +static inline int wil_rx_status_get_frame_type(struct wil6210_priv *wil, + void *msg) +{ + if (wil->use_compressed_rx_status) + return IEEE80211_FTYPE_DATA; + + return WIL_GET_BITS(((struct wil_rx_status_extended *)msg)->ext.d1, + 0, 1) << 2; +} + +static inline int wil_rx_status_get_fc1(struct wil6210_priv *wil, void *msg) +{ + if (wil->use_compressed_rx_status) + return 0; + + return WIL_GET_BITS(((struct wil_rx_status_extended *)msg)->ext.d1, + 0, 5) << 2; +} + +static inline __le16 wil_rx_status_get_seq(struct wil6210_priv *wil, void *msg) +{ + if (wil->use_compressed_rx_status) + return 0; + + return ((struct wil_rx_status_extended *)msg)->ext.seq_num; +} + +static inline u8 wil_rx_status_get_retry(void *msg) +{ + /* retry bit is missing in EDMA HW. return 1 to be on the safe side */ + return 1; +} + +static inline int wil_rx_status_get_mid(void *msg) +{ + if (!(((struct wil_rx_status_compressed *)msg)->d0 & + WIL_RX_EDMA_MID_VALID_BIT)) + return 0; /* use the default MID */ + + return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0, + 20, 21); +} + +static inline int wil_rx_status_get_error(void *msg) +{ + return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0, + 29, 29); +} + +static inline int wil_rx_status_get_l2_rx_status(void *msg) +{ + return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0, + 0, 2); +} + +static inline int wil_rx_status_get_l3_rx_status(void *msg) +{ + return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0, + 3, 4); +} + +static inline int wil_rx_status_get_l4_rx_status(void *msg) +{ + return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0, + 5, 6); +} + +static inline int wil_rx_status_get_security(void *msg) +{ + return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0, + 28, 28); +} + +static inline u8 wil_rx_status_get_key_id(void *msg) +{ + return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d1, + 31, 31); +} + +static inline u8 wil_tx_status_get_mcs(struct wil_ring_tx_status *msg) +{ + return WIL_GET_BITS(msg->d2, 0, 4); +} + +static inline u32 wil_ring_next_head(struct wil_ring *ring) +{ + return (ring->swhead + 1) % ring->size; +} + +static inline void wil_desc_set_addr_edma(struct wil_ring_dma_addr *addr, + __le16 *addr_high_high, + dma_addr_t pa) +{ + addr->addr_low = cpu_to_le32(lower_32_bits(pa)); + addr->addr_high = cpu_to_le16((u16)upper_32_bits(pa)); + *addr_high_high = cpu_to_le16((u16)(upper_32_bits(pa) >> 16)); +} + +static inline +dma_addr_t wil_tx_desc_get_addr_edma(struct wil_ring_tx_enhanced_dma *dma) +{ + return le32_to_cpu(dma->addr.addr_low) | + ((u64)le16_to_cpu(dma->addr.addr_high) << 32) | + ((u64)le16_to_cpu(dma->addr_high_high) << 48); +} + +static inline +dma_addr_t wil_rx_desc_get_addr_edma(struct wil_ring_rx_enhanced_dma *dma) +{ + return le32_to_cpu(dma->addr.addr_low) | + ((u64)le16_to_cpu(dma->addr.addr_high) << 32) | + ((u64)le16_to_cpu(dma->addr_high_high) << 48); +} + +void wil_configure_interrupt_moderation_edma(struct wil6210_priv *wil); +int wil_tx_sring_handler(struct wil6210_priv *wil, + struct wil_status_ring *sring); +void wil_rx_handle_edma(struct wil6210_priv *wil, int *quota); +void wil_init_txrx_ops_edma(struct wil6210_priv *wil); + +#endif /* WIL6210_TXRX_EDMA_H */ + |