summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/broadcom/b43/b43.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/broadcom/b43/b43.h')
-rw-r--r--drivers/net/wireless/broadcom/b43/b43.h1109
1 files changed, 1109 insertions, 0 deletions
diff --git a/drivers/net/wireless/broadcom/b43/b43.h b/drivers/net/wireless/broadcom/b43/b43.h
new file mode 100644
index 0000000..3c77c74
--- /dev/null
+++ b/drivers/net/wireless/broadcom/b43/b43.h
@@ -0,0 +1,1109 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef B43_H_
+#define B43_H_
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/hw_random.h>
+#include <linux/bcma/bcma.h>
+#include <linux/ssb/ssb.h>
+#include <linux/completion.h>
+#include <net/mac80211.h>
+
+#include "debugfs.h"
+#include "leds.h"
+#include "rfkill.h"
+#include "bus.h"
+#include "lo.h"
+#include "phy_common.h"
+
+
+#ifdef CPTCFG_B43_DEBUG
+# define B43_DEBUG 1
+#else
+# define B43_DEBUG 0
+#endif
+
+/* MMIO offsets */
+#define B43_MMIO_DMA0_REASON 0x20
+#define B43_MMIO_DMA0_IRQ_MASK 0x24
+#define B43_MMIO_DMA1_REASON 0x28
+#define B43_MMIO_DMA1_IRQ_MASK 0x2C
+#define B43_MMIO_DMA2_REASON 0x30
+#define B43_MMIO_DMA2_IRQ_MASK 0x34
+#define B43_MMIO_DMA3_REASON 0x38
+#define B43_MMIO_DMA3_IRQ_MASK 0x3C
+#define B43_MMIO_DMA4_REASON 0x40
+#define B43_MMIO_DMA4_IRQ_MASK 0x44
+#define B43_MMIO_DMA5_REASON 0x48
+#define B43_MMIO_DMA5_IRQ_MASK 0x4C
+#define B43_MMIO_MACCTL 0x120 /* MAC control */
+#define B43_MMIO_MACCMD 0x124 /* MAC command */
+#define B43_MMIO_GEN_IRQ_REASON 0x128
+#define B43_MMIO_GEN_IRQ_MASK 0x12C
+#define B43_MMIO_RAM_CONTROL 0x130
+#define B43_MMIO_RAM_DATA 0x134
+#define B43_MMIO_PS_STATUS 0x140
+#define B43_MMIO_RADIO_HWENABLED_HI 0x158
+#define B43_MMIO_MAC_HW_CAP 0x15C /* MAC capabilities (corerev >= 13) */
+#define B43_MMIO_SHM_CONTROL 0x160
+#define B43_MMIO_SHM_DATA 0x164
+#define B43_MMIO_SHM_DATA_UNALIGNED 0x166
+#define B43_MMIO_XMITSTAT_0 0x170
+#define B43_MMIO_XMITSTAT_1 0x174
+#define B43_MMIO_REV3PLUS_TSF_LOW 0x180 /* core rev >= 3 only */
+#define B43_MMIO_REV3PLUS_TSF_HIGH 0x184 /* core rev >= 3 only */
+#define B43_MMIO_TSF_CFP_REP 0x188
+#define B43_MMIO_TSF_CFP_START 0x18C
+#define B43_MMIO_TSF_CFP_MAXDUR 0x190
+
+/* 32-bit DMA */
+#define B43_MMIO_DMA32_BASE0 0x200
+#define B43_MMIO_DMA32_BASE1 0x220
+#define B43_MMIO_DMA32_BASE2 0x240
+#define B43_MMIO_DMA32_BASE3 0x260
+#define B43_MMIO_DMA32_BASE4 0x280
+#define B43_MMIO_DMA32_BASE5 0x2A0
+/* 64-bit DMA */
+#define B43_MMIO_DMA64_BASE0 0x200
+#define B43_MMIO_DMA64_BASE1 0x240
+#define B43_MMIO_DMA64_BASE2 0x280
+#define B43_MMIO_DMA64_BASE3 0x2C0
+#define B43_MMIO_DMA64_BASE4 0x300
+#define B43_MMIO_DMA64_BASE5 0x340
+
+/* PIO on core rev < 11 */
+#define B43_MMIO_PIO_BASE0 0x300
+#define B43_MMIO_PIO_BASE1 0x310
+#define B43_MMIO_PIO_BASE2 0x320
+#define B43_MMIO_PIO_BASE3 0x330
+#define B43_MMIO_PIO_BASE4 0x340
+#define B43_MMIO_PIO_BASE5 0x350
+#define B43_MMIO_PIO_BASE6 0x360
+#define B43_MMIO_PIO_BASE7 0x370
+/* PIO on core rev >= 11 */
+#define B43_MMIO_PIO11_BASE0 0x200
+#define B43_MMIO_PIO11_BASE1 0x240
+#define B43_MMIO_PIO11_BASE2 0x280
+#define B43_MMIO_PIO11_BASE3 0x2C0
+#define B43_MMIO_PIO11_BASE4 0x300
+#define B43_MMIO_PIO11_BASE5 0x340
+
+#define B43_MMIO_RADIO24_CONTROL 0x3D8 /* core rev >= 24 only */
+#define B43_MMIO_RADIO24_DATA 0x3DA /* core rev >= 24 only */
+#define B43_MMIO_PHY_VER 0x3E0
+#define B43_MMIO_PHY_RADIO 0x3E2
+#define B43_MMIO_PHY0 0x3E6
+#define B43_MMIO_ANTENNA 0x3E8
+#define B43_MMIO_CHANNEL 0x3F0
+#define B43_MMIO_CHANNEL_EXT 0x3F4
+#define B43_MMIO_RADIO_CONTROL 0x3F6
+#define B43_MMIO_RADIO_DATA_HIGH 0x3F8
+#define B43_MMIO_RADIO_DATA_LOW 0x3FA
+#define B43_MMIO_PHY_CONTROL 0x3FC
+#define B43_MMIO_PHY_DATA 0x3FE
+#define B43_MMIO_MACFILTER_CONTROL 0x420
+#define B43_MMIO_MACFILTER_DATA 0x422
+#define B43_MMIO_RCMTA_COUNT 0x43C
+#define B43_MMIO_PSM_PHY_HDR 0x492
+#define B43_MMIO_RADIO_HWENABLED_LO 0x49A
+#define B43_MMIO_GPIO_CONTROL 0x49C
+#define B43_MMIO_GPIO_MASK 0x49E
+#define B43_MMIO_TXE0_CTL 0x500
+#define B43_MMIO_TXE0_AUX 0x502
+#define B43_MMIO_TXE0_TS_LOC 0x504
+#define B43_MMIO_TXE0_TIME_OUT 0x506
+#define B43_MMIO_TXE0_WM_0 0x508
+#define B43_MMIO_TXE0_WM_1 0x50A
+#define B43_MMIO_TXE0_PHYCTL 0x50C
+#define B43_MMIO_TXE0_STATUS 0x50E
+#define B43_MMIO_TXE0_MMPLCP0 0x510
+#define B43_MMIO_TXE0_MMPLCP1 0x512
+#define B43_MMIO_TXE0_PHYCTL1 0x514
+#define B43_MMIO_XMTFIFODEF 0x520
+#define B43_MMIO_XMTFIFO_FRAME_CNT 0x522 /* core rev>= 16 only */
+#define B43_MMIO_XMTFIFO_BYTE_CNT 0x524 /* core rev>= 16 only */
+#define B43_MMIO_XMTFIFO_HEAD 0x526 /* core rev>= 16 only */
+#define B43_MMIO_XMTFIFO_RD_PTR 0x528 /* core rev>= 16 only */
+#define B43_MMIO_XMTFIFO_WR_PTR 0x52A /* core rev>= 16 only */
+#define B43_MMIO_XMTFIFODEF1 0x52C /* core rev>= 16 only */
+#define B43_MMIO_XMTFIFOCMD 0x540
+#define B43_MMIO_XMTFIFOFLUSH 0x542
+#define B43_MMIO_XMTFIFOTHRESH 0x544
+#define B43_MMIO_XMTFIFORDY 0x546
+#define B43_MMIO_XMTFIFOPRIRDY 0x548
+#define B43_MMIO_XMTFIFORQPRI 0x54A
+#define B43_MMIO_XMTTPLATETXPTR 0x54C
+#define B43_MMIO_XMTTPLATEPTR 0x550
+#define B43_MMIO_SMPL_CLCT_STRPTR 0x552 /* core rev>= 22 only */
+#define B43_MMIO_SMPL_CLCT_STPPTR 0x554 /* core rev>= 22 only */
+#define B43_MMIO_SMPL_CLCT_CURPTR 0x556 /* core rev>= 22 only */
+#define B43_MMIO_XMTTPLATEDATALO 0x560
+#define B43_MMIO_XMTTPLATEDATAHI 0x562
+#define B43_MMIO_XMTSEL 0x568
+#define B43_MMIO_XMTTXCNT 0x56A
+#define B43_MMIO_XMTTXSHMADDR 0x56C
+#define B43_MMIO_TSF_CFP_START_LOW 0x604
+#define B43_MMIO_TSF_CFP_START_HIGH 0x606
+#define B43_MMIO_TSF_CFP_PRETBTT 0x612
+#define B43_MMIO_TSF_CLK_FRAC_LOW 0x62E
+#define B43_MMIO_TSF_CLK_FRAC_HIGH 0x630
+#define B43_MMIO_TSF_0 0x632 /* core rev < 3 only */
+#define B43_MMIO_TSF_1 0x634 /* core rev < 3 only */
+#define B43_MMIO_TSF_2 0x636 /* core rev < 3 only */
+#define B43_MMIO_TSF_3 0x638 /* core rev < 3 only */
+#define B43_MMIO_RNG 0x65A
+#define B43_MMIO_IFSSLOT 0x684 /* Interframe slot time */
+#define B43_MMIO_IFSCTL 0x688 /* Interframe space control */
+#define B43_MMIO_IFSSTAT 0x690
+#define B43_MMIO_IFSMEDBUSYCTL 0x692
+#define B43_MMIO_IFTXDUR 0x694
+#define B43_MMIO_IFSCTL_USE_EDCF 0x0004
+#define B43_MMIO_POWERUP_DELAY 0x6A8
+#define B43_MMIO_BTCOEX_CTL 0x6B4 /* Bluetooth Coexistence Control */
+#define B43_MMIO_BTCOEX_STAT 0x6B6 /* Bluetooth Coexistence Status */
+#define B43_MMIO_BTCOEX_TXCTL 0x6B8 /* Bluetooth Coexistence Transmit Control */
+#define B43_MMIO_WEPCTL 0x7C0
+
+/* SPROM boardflags_lo values */
+#define B43_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */
+#define B43_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */
+#define B43_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */
+#define B43_BFL_RSSI 0x0008 /* software calculates nrssi slope. */
+#define B43_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */
+#define B43_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */
+#define B43_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */
+#define B43_BFL_ENETADM 0x0080 /* has ADMtek switch */
+#define B43_BFL_ENETVLAN 0x0100 /* can do vlan */
+#define B43_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */
+#define B43_BFL_NOPCI 0x0400 /* leaves PCI floating */
+#define B43_BFL_FEM 0x0800 /* supports the Front End Module */
+#define B43_BFL_EXTLNA 0x1000 /* has an external LNA */
+#define B43_BFL_HGPA 0x2000 /* had high gain PA */
+#define B43_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */
+#define B43_BFL_ALTIQ 0x8000 /* alternate I/Q settings */
+
+/* SPROM boardflags_hi values */
+#define B43_BFH_NOPA 0x0001 /* has no PA */
+#define B43_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */
+#define B43_BFH_PAREF 0x0004 /* uses the PARef LDO */
+#define B43_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared
+ * with bluetooth */
+#define B43_BFH_PHASESHIFT 0x0010 /* can support phase shifter */
+#define B43_BFH_BUCKBOOST 0x0020 /* has buck/booster */
+#define B43_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna
+ * with bluetooth */
+#define B43_BFH_NOCBUCK 0x0080
+#define B43_BFH_PALDO 0x0200
+#define B43_BFH_EXTLNA_5GHZ 0x1000 /* has an external LNA (5GHz mode) */
+
+/* SPROM boardflags2_lo values */
+#define B43_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */
+#define B43_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */
+#define B43_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */
+#define B43_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */
+#define B43_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */
+#define B43_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */
+#define B43_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */
+#define B43_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */
+#define B43_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */
+#define B43_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */
+#define B43_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */
+#define B43_BFL2_SINGLEANT_CCK 0x1000
+#define B43_BFL2_2G_SPUR_WAR 0x2000
+
+/* SPROM boardflags2_hi values */
+#define B43_BFH2_GPLL_WAR2 0x0001
+#define B43_BFH2_IPALVLSHIFT_3P3 0x0002
+#define B43_BFH2_INTERNDET_TXIQCAL 0x0004
+#define B43_BFH2_XTALBUFOUTEN 0x0008
+
+/* GPIO register offset, in both ChipCommon and PCI core. */
+#define B43_GPIO_CONTROL 0x6c
+
+/* SHM Routing */
+enum {
+ B43_SHM_UCODE, /* Microcode memory */
+ B43_SHM_SHARED, /* Shared memory */
+ B43_SHM_SCRATCH, /* Scratch memory */
+ B43_SHM_HW, /* Internal hardware register */
+ B43_SHM_RCMTA, /* Receive match transmitter address (rev >= 5 only) */
+};
+/* SHM Routing modifiers */
+#define B43_SHM_AUTOINC_R 0x0200 /* Auto-increment address on read */
+#define B43_SHM_AUTOINC_W 0x0100 /* Auto-increment address on write */
+#define B43_SHM_AUTOINC_RW (B43_SHM_AUTOINC_R | \
+ B43_SHM_AUTOINC_W)
+
+/* Misc SHM_SHARED offsets */
+#define B43_SHM_SH_WLCOREREV 0x0016 /* 802.11 core revision */
+#define B43_SHM_SH_PCTLWDPOS 0x0008
+#define B43_SHM_SH_RXPADOFF 0x0034 /* RX Padding data offset (PIO only) */
+#define B43_SHM_SH_FWCAPA 0x0042 /* Firmware capabilities (Opensource firmware only) */
+#define B43_SHM_SH_PHYVER 0x0050 /* PHY version */
+#define B43_SHM_SH_PHYTYPE 0x0052 /* PHY type */
+#define B43_SHM_SH_ANTSWAP 0x005C /* Antenna swap threshold */
+#define B43_SHM_SH_HOSTF1 0x005E /* Hostflags 1 for ucode options */
+#define B43_SHM_SH_HOSTF2 0x0060 /* Hostflags 2 for ucode options */
+#define B43_SHM_SH_HOSTF3 0x0062 /* Hostflags 3 for ucode options */
+#define B43_SHM_SH_RFATT 0x0064 /* Current radio attenuation value */
+#define B43_SHM_SH_RADAR 0x0066 /* Radar register */
+#define B43_SHM_SH_PHYTXNOI 0x006E /* PHY noise directly after TX (lower 8bit only) */
+#define B43_SHM_SH_RFRXSP1 0x0072 /* RF RX SP Register 1 */
+#define B43_SHM_SH_HOSTF4 0x0078 /* Hostflags 4 for ucode options */
+#define B43_SHM_SH_CHAN 0x00A0 /* Current channel (low 8bit only) */
+#define B43_SHM_SH_CHAN_5GHZ 0x0100 /* Bit set, if 5 Ghz channel */
+#define B43_SHM_SH_CHAN_40MHZ 0x0200 /* Bit set, if 40 Mhz channel width */
+#define B43_SHM_SH_MACHW_L 0x00C0 /* Location where the ucode expects the MAC capabilities */
+#define B43_SHM_SH_MACHW_H 0x00C2 /* Location where the ucode expects the MAC capabilities */
+#define B43_SHM_SH_HOSTF5 0x00D4 /* Hostflags 5 for ucode options */
+#define B43_SHM_SH_BCMCFIFOID 0x0108 /* Last posted cookie to the bcast/mcast FIFO */
+/* TSSI information */
+#define B43_SHM_SH_TSSI_CCK 0x0058 /* TSSI for last 4 CCK frames (32bit) */
+#define B43_SHM_SH_TSSI_OFDM_A 0x0068 /* TSSI for last 4 OFDM frames (32bit) */
+#define B43_SHM_SH_TSSI_OFDM_G 0x0070 /* TSSI for last 4 OFDM frames (32bit) */
+#define B43_TSSI_MAX 0x7F /* Max value for one TSSI value */
+/* SHM_SHARED TX FIFO variables */
+#define B43_SHM_SH_SIZE01 0x0098 /* TX FIFO size for FIFO 0 (low) and 1 (high) */
+#define B43_SHM_SH_SIZE23 0x009A /* TX FIFO size for FIFO 2 and 3 */
+#define B43_SHM_SH_SIZE45 0x009C /* TX FIFO size for FIFO 4 and 5 */
+#define B43_SHM_SH_SIZE67 0x009E /* TX FIFO size for FIFO 6 and 7 */
+/* SHM_SHARED background noise */
+#define B43_SHM_SH_JSSI0 0x0088 /* Measure JSSI 0 */
+#define B43_SHM_SH_JSSI1 0x008A /* Measure JSSI 1 */
+#define B43_SHM_SH_JSSIAUX 0x008C /* Measure JSSI AUX */
+/* SHM_SHARED crypto engine */
+#define B43_SHM_SH_DEFAULTIV 0x003C /* Default IV location */
+#define B43_SHM_SH_NRRXTRANS 0x003E /* # of soft RX transmitter addresses (max 8) */
+#define B43_SHM_SH_KTP 0x0056 /* Key table pointer */
+#define B43_SHM_SH_TKIPTSCTTAK 0x0318
+#define B43_SHM_SH_KEYIDXBLOCK 0x05D4 /* Key index/algorithm block (v4 firmware) */
+#define B43_SHM_SH_PSM 0x05F4 /* PSM transmitter address match block (rev < 5) */
+/* SHM_SHARED WME variables */
+#define B43_SHM_SH_EDCFSTAT 0x000E /* EDCF status */
+#define B43_SHM_SH_TXFCUR 0x0030 /* TXF current index */
+#define B43_SHM_SH_EDCFQ 0x0240 /* EDCF Q info */
+/* SHM_SHARED powersave mode related */
+#define B43_SHM_SH_SLOTT 0x0010 /* Slot time */
+#define B43_SHM_SH_DTIMPER 0x0012 /* DTIM period */
+#define B43_SHM_SH_NOSLPZNATDTIM 0x004C /* NOSLPZNAT DTIM */
+/* SHM_SHARED beacon/AP variables */
+#define B43_SHM_SH_BT_BASE0 0x0068 /* Beacon template base 0 */
+#define B43_SHM_SH_BTL0 0x0018 /* Beacon template length 0 */
+#define B43_SHM_SH_BT_BASE1 0x0468 /* Beacon template base 1 */
+#define B43_SHM_SH_BTL1 0x001A /* Beacon template length 1 */
+#define B43_SHM_SH_BTSFOFF 0x001C /* Beacon TSF offset */
+#define B43_SHM_SH_TIMBPOS 0x001E /* TIM B position in beacon */
+#define B43_SHM_SH_DTIMP 0x0012 /* DTIP period */
+#define B43_SHM_SH_MCASTCOOKIE 0x00A8 /* Last bcast/mcast frame ID */
+#define B43_SHM_SH_SFFBLIM 0x0044 /* Short frame fallback retry limit */
+#define B43_SHM_SH_LFFBLIM 0x0046 /* Long frame fallback retry limit */
+#define B43_SHM_SH_BEACPHYCTL 0x0054 /* Beacon PHY TX control word (see PHY TX control) */
+#define B43_SHM_SH_EXTNPHYCTL 0x00B0 /* Extended bytes for beacon PHY control (N) */
+#define B43_SHM_SH_BCN_LI 0x00B6 /* beacon listen interval */
+/* SHM_SHARED ACK/CTS control */
+#define B43_SHM_SH_ACKCTSPHYCTL 0x0022 /* ACK/CTS PHY control word (see PHY TX control) */
+/* SHM_SHARED probe response variables */
+#define B43_SHM_SH_PRSSID 0x0160 /* Probe Response SSID */
+#define B43_SHM_SH_PRSSIDLEN 0x0048 /* Probe Response SSID length */
+#define B43_SHM_SH_PRTLEN 0x004A /* Probe Response template length */
+#define B43_SHM_SH_PRMAXTIME 0x0074 /* Probe Response max time */
+#define B43_SHM_SH_PRPHYCTL 0x0188 /* Probe Response PHY TX control word */
+/* SHM_SHARED rate tables */
+#define B43_SHM_SH_OFDMDIRECT 0x01C0 /* Pointer to OFDM direct map */
+#define B43_SHM_SH_OFDMBASIC 0x01E0 /* Pointer to OFDM basic rate map */
+#define B43_SHM_SH_CCKDIRECT 0x0200 /* Pointer to CCK direct map */
+#define B43_SHM_SH_CCKBASIC 0x0220 /* Pointer to CCK basic rate map */
+/* SHM_SHARED microcode soft registers */
+#define B43_SHM_SH_UCODEREV 0x0000 /* Microcode revision */
+#define B43_SHM_SH_UCODEPATCH 0x0002 /* Microcode patchlevel */
+#define B43_SHM_SH_UCODEDATE 0x0004 /* Microcode date */
+#define B43_SHM_SH_UCODETIME 0x0006 /* Microcode time */
+#define B43_SHM_SH_UCODESTAT 0x0040 /* Microcode debug status code */
+#define B43_SHM_SH_UCODESTAT_INVALID 0
+#define B43_SHM_SH_UCODESTAT_INIT 1
+#define B43_SHM_SH_UCODESTAT_ACTIVE 2
+#define B43_SHM_SH_UCODESTAT_SUSP 3 /* suspended */
+#define B43_SHM_SH_UCODESTAT_SLEEP 4 /* asleep (PS) */
+#define B43_SHM_SH_MAXBFRAMES 0x0080 /* Maximum number of frames in a burst */
+#define B43_SHM_SH_SPUWKUP 0x0094 /* pre-wakeup for synth PU in us */
+#define B43_SHM_SH_PRETBTT 0x0096 /* pre-TBTT in us */
+/* SHM_SHARED tx iq workarounds */
+#define B43_SHM_SH_NPHY_TXIQW0 0x0700
+#define B43_SHM_SH_NPHY_TXIQW1 0x0702
+#define B43_SHM_SH_NPHY_TXIQW2 0x0704
+#define B43_SHM_SH_NPHY_TXIQW3 0x0706
+/* SHM_SHARED tx pwr ctrl */
+#define B43_SHM_SH_NPHY_TXPWR_INDX0 0x0708
+#define B43_SHM_SH_NPHY_TXPWR_INDX1 0x070E
+
+/* SHM_SCRATCH offsets */
+#define B43_SHM_SC_MINCONT 0x0003 /* Minimum contention window */
+#define B43_SHM_SC_MAXCONT 0x0004 /* Maximum contention window */
+#define B43_SHM_SC_CURCONT 0x0005 /* Current contention window */
+#define B43_SHM_SC_SRLIMIT 0x0006 /* Short retry count limit */
+#define B43_SHM_SC_LRLIMIT 0x0007 /* Long retry count limit */
+#define B43_SHM_SC_DTIMC 0x0008 /* Current DTIM count */
+#define B43_SHM_SC_BTL0LEN 0x0015 /* Beacon 0 template length */
+#define B43_SHM_SC_BTL1LEN 0x0016 /* Beacon 1 template length */
+#define B43_SHM_SC_SCFB 0x0017 /* Short frame transmit count threshold for rate fallback */
+#define B43_SHM_SC_LCFB 0x0018 /* Long frame transmit count threshold for rate fallback */
+
+/* Hardware Radio Enable masks */
+#define B43_MMIO_RADIO_HWENABLED_HI_MASK (1 << 16)
+#define B43_MMIO_RADIO_HWENABLED_LO_MASK (1 << 4)
+
+/* HostFlags. See b43_hf_read/write() */
+#define B43_HF_ANTDIVHELP 0x000000000001ULL /* ucode antenna div helper */
+#define B43_HF_SYMW 0x000000000002ULL /* G-PHY SYM workaround */
+#define B43_HF_RXPULLW 0x000000000004ULL /* RX pullup workaround */
+#define B43_HF_CCKBOOST 0x000000000008ULL /* 4dB CCK power boost (exclusive with OFDM boost) */
+#define B43_HF_BTCOEX 0x000000000010ULL /* Bluetooth coexistance */
+#define B43_HF_GDCW 0x000000000020ULL /* G-PHY DC canceller filter bw workaround */
+#define B43_HF_OFDMPABOOST 0x000000000040ULL /* Enable PA gain boost for OFDM */
+#define B43_HF_ACPR 0x000000000080ULL /* Disable for Japan, channel 14 */
+#define B43_HF_EDCF 0x000000000100ULL /* on if WME and MAC suspended */
+#define B43_HF_TSSIRPSMW 0x000000000200ULL /* TSSI reset PSM ucode workaround */
+#define B43_HF_20IN40IQW 0x000000000200ULL /* 20 in 40 MHz I/Q workaround (rev >= 13 only) */
+#define B43_HF_DSCRQ 0x000000000400ULL /* Disable slow clock request in ucode */
+#define B43_HF_ACIW 0x000000000800ULL /* ACI workaround: shift bits by 2 on PHY CRS */
+#define B43_HF_2060W 0x000000001000ULL /* 2060 radio workaround */
+#define B43_HF_RADARW 0x000000002000ULL /* Radar workaround */
+#define B43_HF_USEDEFKEYS 0x000000004000ULL /* Enable use of default keys */
+#define B43_HF_AFTERBURNER 0x000000008000ULL /* Afterburner enabled */
+#define B43_HF_BT4PRIOCOEX 0x000000010000ULL /* Bluetooth 4-priority coexistance */
+#define B43_HF_FWKUP 0x000000020000ULL /* Fast wake-up ucode */
+#define B43_HF_VCORECALC 0x000000040000ULL /* Force VCO recalculation when powering up synthpu */
+#define B43_HF_PCISCW 0x000000080000ULL /* PCI slow clock workaround */
+#define B43_HF_4318TSSI 0x000000200000ULL /* 4318 TSSI */
+#define B43_HF_FBCMCFIFO 0x000000400000ULL /* Flush bcast/mcast FIFO immediately */
+#define B43_HF_HWPCTL 0x000000800000ULL /* Enable hardwarre power control */
+#define B43_HF_BTCOEXALT 0x000001000000ULL /* Bluetooth coexistance in alternate pins */
+#define B43_HF_TXBTCHECK 0x000002000000ULL /* Bluetooth check during transmission */
+#define B43_HF_SKCFPUP 0x000004000000ULL /* Skip CFP update */
+#define B43_HF_N40W 0x000008000000ULL /* N PHY 40 MHz workaround (rev >= 13 only) */
+#define B43_HF_ANTSEL 0x000020000000ULL /* Antenna selection (for testing antenna div.) */
+#define B43_HF_BT3COEXT 0x000020000000ULL /* Bluetooth 3-wire coexistence (rev >= 13 only) */
+#define B43_HF_BTCANT 0x000040000000ULL /* Bluetooth coexistence (antenna mode) (rev >= 13 only) */
+#define B43_HF_ANTSELEN 0x000100000000ULL /* Antenna selection enabled (rev >= 13 only) */
+#define B43_HF_ANTSELMODE 0x000200000000ULL /* Antenna selection mode (rev >= 13 only) */
+#define B43_HF_MLADVW 0x001000000000ULL /* N PHY ML ADV workaround (rev >= 13 only) */
+#define B43_HF_PR45960W 0x080000000000ULL /* PR 45960 workaround (rev >= 13 only) */
+
+/* Firmware capabilities field in SHM (Opensource firmware only) */
+#define B43_FWCAPA_HWCRYPTO 0x0001
+#define B43_FWCAPA_QOS 0x0002
+
+/* MacFilter offsets. */
+#define B43_MACFILTER_SELF 0x0000
+#define B43_MACFILTER_BSSID 0x0003
+
+/* PowerControl */
+#define B43_PCTL_IN 0xB0
+#define B43_PCTL_OUT 0xB4
+#define B43_PCTL_OUTENABLE 0xB8
+#define B43_PCTL_XTAL_POWERUP 0x40
+#define B43_PCTL_PLL_POWERDOWN 0x80
+
+/* PowerControl Clock Modes */
+#define B43_PCTL_CLK_FAST 0x00
+#define B43_PCTL_CLK_SLOW 0x01
+#define B43_PCTL_CLK_DYNAMIC 0x02
+
+#define B43_PCTL_FORCE_SLOW 0x0800
+#define B43_PCTL_FORCE_PLL 0x1000
+#define B43_PCTL_DYN_XTAL 0x2000
+
+/* PHYVersioning */
+#define B43_PHYTYPE_A 0x00
+#define B43_PHYTYPE_B 0x01
+#define B43_PHYTYPE_G 0x02
+#define B43_PHYTYPE_N 0x04
+#define B43_PHYTYPE_LP 0x05
+#define B43_PHYTYPE_SSLPN 0x06
+#define B43_PHYTYPE_HT 0x07
+#define B43_PHYTYPE_LCN 0x08
+#define B43_PHYTYPE_LCNXN 0x09
+#define B43_PHYTYPE_LCN40 0x0a
+#define B43_PHYTYPE_AC 0x0b
+
+/* PHYRegisters */
+#define B43_PHY_ILT_A_CTRL 0x0072
+#define B43_PHY_ILT_A_DATA1 0x0073
+#define B43_PHY_ILT_A_DATA2 0x0074
+#define B43_PHY_G_LO_CONTROL 0x0810
+#define B43_PHY_ILT_G_CTRL 0x0472
+#define B43_PHY_ILT_G_DATA1 0x0473
+#define B43_PHY_ILT_G_DATA2 0x0474
+#define B43_PHY_A_PCTL 0x007B
+#define B43_PHY_G_PCTL 0x0029
+#define B43_PHY_A_CRS 0x0029
+#define B43_PHY_RADIO_BITFIELD 0x0401
+#define B43_PHY_G_CRS 0x0429
+#define B43_PHY_NRSSILT_CTRL 0x0803
+#define B43_PHY_NRSSILT_DATA 0x0804
+
+/* RadioRegisters */
+#define B43_RADIOCTL_ID 0x01
+
+/* MAC Control bitfield */
+#define B43_MACCTL_ENABLED 0x00000001 /* MAC Enabled */
+#define B43_MACCTL_PSM_RUN 0x00000002 /* Run Microcode */
+#define B43_MACCTL_PSM_JMP0 0x00000004 /* Microcode jump to 0 */
+#define B43_MACCTL_SHM_ENABLED 0x00000100 /* SHM Enabled */
+#define B43_MACCTL_SHM_UPPER 0x00000200 /* SHM Upper */
+#define B43_MACCTL_IHR_ENABLED 0x00000400 /* IHR Region Enabled */
+#define B43_MACCTL_PSM_DBG 0x00002000 /* Microcode debugging enabled */
+#define B43_MACCTL_GPOUTSMSK 0x0000C000 /* GPOUT Select Mask */
+#define B43_MACCTL_BE 0x00010000 /* Big Endian mode */
+#define B43_MACCTL_INFRA 0x00020000 /* Infrastructure mode */
+#define B43_MACCTL_AP 0x00040000 /* AccessPoint mode */
+#define B43_MACCTL_RADIOLOCK 0x00080000 /* Radio lock */
+#define B43_MACCTL_BEACPROMISC 0x00100000 /* Beacon Promiscuous */
+#define B43_MACCTL_KEEP_BADPLCP 0x00200000 /* Keep frames with bad PLCP */
+#define B43_MACCTL_PHY_LOCK 0x00200000
+#define B43_MACCTL_KEEP_CTL 0x00400000 /* Keep control frames */
+#define B43_MACCTL_KEEP_BAD 0x00800000 /* Keep bad frames (FCS) */
+#define B43_MACCTL_PROMISC 0x01000000 /* Promiscuous mode */
+#define B43_MACCTL_HWPS 0x02000000 /* Hardware Power Saving */
+#define B43_MACCTL_AWAKE 0x04000000 /* Device is awake */
+#define B43_MACCTL_CLOSEDNET 0x08000000 /* Closed net (no SSID bcast) */
+#define B43_MACCTL_TBTTHOLD 0x10000000 /* TBTT Hold */
+#define B43_MACCTL_DISCTXSTAT 0x20000000 /* Discard TX status */
+#define B43_MACCTL_DISCPMQ 0x40000000 /* Discard Power Management Queue */
+#define B43_MACCTL_GMODE 0x80000000 /* G Mode */
+
+/* MAC Command bitfield */
+#define B43_MACCMD_BEACON0_VALID 0x00000001 /* Beacon 0 in template RAM is busy/valid */
+#define B43_MACCMD_BEACON1_VALID 0x00000002 /* Beacon 1 in template RAM is busy/valid */
+#define B43_MACCMD_DFQ_VALID 0x00000004 /* Directed frame queue valid (IBSS PS mode, ATIM) */
+#define B43_MACCMD_CCA 0x00000008 /* Clear channel assessment */
+#define B43_MACCMD_BGNOISE 0x00000010 /* Background noise */
+
+/* B43_MMIO_PSM_PHY_HDR bits */
+#define B43_PSM_HDR_MAC_PHY_RESET 0x00000001
+#define B43_PSM_HDR_MAC_PHY_CLOCK_EN 0x00000002
+#define B43_PSM_HDR_MAC_PHY_FORCE_CLK 0x00000004
+
+/* See BCMA_CLKCTLST_EXTRESREQ and BCMA_CLKCTLST_EXTRESST */
+#define B43_BCMA_CLKCTLST_80211_PLL_REQ 0x00000100
+#define B43_BCMA_CLKCTLST_PHY_PLL_REQ 0x00000200
+#define B43_BCMA_CLKCTLST_80211_PLL_ST 0x01000000
+#define B43_BCMA_CLKCTLST_PHY_PLL_ST 0x02000000
+
+/* BCMA 802.11 core specific IO Control (BCMA_IOCTL) flags */
+#define B43_BCMA_IOCTL_PHY_CLKEN 0x00000004 /* PHY Clock Enable */
+#define B43_BCMA_IOCTL_PHY_RESET 0x00000008 /* PHY Reset */
+#define B43_BCMA_IOCTL_MACPHYCLKEN 0x00000010 /* MAC PHY Clock Control Enable */
+#define B43_BCMA_IOCTL_PLLREFSEL 0x00000020 /* PLL Frequency Reference Select */
+#define B43_BCMA_IOCTL_PHY_BW 0x000000C0 /* PHY band width and clock speed mask (N-PHY+ only?) */
+#define B43_BCMA_IOCTL_PHY_BW_10MHZ 0x00000000 /* 10 MHz bandwidth, 40 MHz PHY */
+#define B43_BCMA_IOCTL_PHY_BW_20MHZ 0x00000040 /* 20 MHz bandwidth, 80 MHz PHY */
+#define B43_BCMA_IOCTL_PHY_BW_40MHZ 0x00000080 /* 40 MHz bandwidth, 160 MHz PHY */
+#define B43_BCMA_IOCTL_PHY_BW_80MHZ 0x000000C0 /* 80 MHz bandwidth */
+#define B43_BCMA_IOCTL_DAC 0x00000300 /* Highspeed DAC mode control field */
+#define B43_BCMA_IOCTL_GMODE 0x00002000 /* G Mode Enable */
+
+/* BCMA 802.11 core specific IO status (BCMA_IOST) flags */
+#define B43_BCMA_IOST_2G_PHY 0x00000001 /* 2.4G capable phy */
+#define B43_BCMA_IOST_5G_PHY 0x00000002 /* 5G capable phy */
+#define B43_BCMA_IOST_FASTCLKA 0x00000004 /* Fast Clock Available */
+#define B43_BCMA_IOST_DUALB_PHY 0x00000008 /* Dualband phy */
+
+/* 802.11 core specific TM State Low (SSB_TMSLOW) flags */
+#define B43_TMSLOW_GMODE 0x20000000 /* G Mode Enable */
+#define B43_TMSLOW_PHY_BANDWIDTH 0x00C00000 /* PHY band width and clock speed mask (N-PHY only) */
+#define B43_TMSLOW_PHY_BANDWIDTH_10MHZ 0x00000000 /* 10 MHz bandwidth, 40 MHz PHY */
+#define B43_TMSLOW_PHY_BANDWIDTH_20MHZ 0x00400000 /* 20 MHz bandwidth, 80 MHz PHY */
+#define B43_TMSLOW_PHY_BANDWIDTH_40MHZ 0x00800000 /* 40 MHz bandwidth, 160 MHz PHY */
+#define B43_TMSLOW_PLLREFSEL 0x00200000 /* PLL Frequency Reference Select (rev >= 5) */
+#define B43_TMSLOW_MACPHYCLKEN 0x00100000 /* MAC PHY Clock Control Enable (rev >= 5) */
+#define B43_TMSLOW_PHYRESET 0x00080000 /* PHY Reset */
+#define B43_TMSLOW_PHYCLKEN 0x00040000 /* PHY Clock Enable */
+
+/* 802.11 core specific TM State High (SSB_TMSHIGH) flags */
+#define B43_TMSHIGH_DUALBAND_PHY 0x00080000 /* Dualband PHY available */
+#define B43_TMSHIGH_FCLOCK 0x00040000 /* Fast Clock Available (rev >= 5) */
+#define B43_TMSHIGH_HAVE_5GHZ_PHY 0x00020000 /* 5 GHz PHY available (rev >= 5) */
+#define B43_TMSHIGH_HAVE_2GHZ_PHY 0x00010000 /* 2.4 GHz PHY available (rev >= 5) */
+
+/* Generic-Interrupt reasons. */
+#define B43_IRQ_MAC_SUSPENDED 0x00000001
+#define B43_IRQ_BEACON 0x00000002
+#define B43_IRQ_TBTT_INDI 0x00000004
+#define B43_IRQ_BEACON_TX_OK 0x00000008
+#define B43_IRQ_BEACON_CANCEL 0x00000010
+#define B43_IRQ_ATIM_END 0x00000020
+#define B43_IRQ_PMQ 0x00000040
+#define B43_IRQ_PIO_WORKAROUND 0x00000100
+#define B43_IRQ_MAC_TXERR 0x00000200
+#define B43_IRQ_PHY_TXERR 0x00000800
+#define B43_IRQ_PMEVENT 0x00001000
+#define B43_IRQ_TIMER0 0x00002000
+#define B43_IRQ_TIMER1 0x00004000
+#define B43_IRQ_DMA 0x00008000
+#define B43_IRQ_TXFIFO_FLUSH_OK 0x00010000
+#define B43_IRQ_CCA_MEASURE_OK 0x00020000
+#define B43_IRQ_NOISESAMPLE_OK 0x00040000
+#define B43_IRQ_UCODE_DEBUG 0x08000000
+#define B43_IRQ_RFKILL 0x10000000
+#define B43_IRQ_TX_OK 0x20000000
+#define B43_IRQ_PHY_G_CHANGED 0x40000000
+#define B43_IRQ_TIMEOUT 0x80000000
+
+#define B43_IRQ_ALL 0xFFFFFFFF
+#define B43_IRQ_MASKTEMPLATE (B43_IRQ_TBTT_INDI | \
+ B43_IRQ_ATIM_END | \
+ B43_IRQ_PMQ | \
+ B43_IRQ_MAC_TXERR | \
+ B43_IRQ_PHY_TXERR | \
+ B43_IRQ_DMA | \
+ B43_IRQ_TXFIFO_FLUSH_OK | \
+ B43_IRQ_NOISESAMPLE_OK | \
+ B43_IRQ_UCODE_DEBUG | \
+ B43_IRQ_RFKILL | \
+ B43_IRQ_TX_OK)
+
+/* The firmware register to fetch the debug-IRQ reason from. */
+#define B43_DEBUGIRQ_REASON_REG 63
+/* Debug-IRQ reasons. */
+#define B43_DEBUGIRQ_PANIC 0 /* The firmware panic'ed */
+#define B43_DEBUGIRQ_DUMP_SHM 1 /* Dump shared SHM */
+#define B43_DEBUGIRQ_DUMP_REGS 2 /* Dump the microcode registers */
+#define B43_DEBUGIRQ_MARKER 3 /* A "marker" was thrown by the firmware. */
+#define B43_DEBUGIRQ_ACK 0xFFFF /* The host writes that to ACK the IRQ */
+
+/* The firmware register that contains the "marker" line. */
+#define B43_MARKER_ID_REG 2
+#define B43_MARKER_LINE_REG 3
+
+/* The firmware register to fetch the panic reason from. */
+#define B43_FWPANIC_REASON_REG 3
+/* Firmware panic reason codes */
+#define B43_FWPANIC_DIE 0 /* Firmware died. Don't auto-restart it. */
+#define B43_FWPANIC_RESTART 1 /* Firmware died. Schedule a controller reset. */
+
+/* The firmware register that contains the watchdog counter. */
+#define B43_WATCHDOG_REG 1
+
+/* Device specific rate values.
+ * The actual values defined here are (rate_in_mbps * 2).
+ * Some code depends on this. Don't change it. */
+#define B43_CCK_RATE_1MB 0x02
+#define B43_CCK_RATE_2MB 0x04
+#define B43_CCK_RATE_5MB 0x0B
+#define B43_CCK_RATE_11MB 0x16
+#define B43_OFDM_RATE_6MB 0x0C
+#define B43_OFDM_RATE_9MB 0x12
+#define B43_OFDM_RATE_12MB 0x18
+#define B43_OFDM_RATE_18MB 0x24
+#define B43_OFDM_RATE_24MB 0x30
+#define B43_OFDM_RATE_36MB 0x48
+#define B43_OFDM_RATE_48MB 0x60
+#define B43_OFDM_RATE_54MB 0x6C
+/* Convert a b43 rate value to a rate in 100kbps */
+#define B43_RATE_TO_BASE100KBPS(rate) (((rate) * 10) / 2)
+
+#define B43_DEFAULT_SHORT_RETRY_LIMIT 7
+#define B43_DEFAULT_LONG_RETRY_LIMIT 4
+
+#define B43_PHY_TX_BADNESS_LIMIT 1000
+
+/* Max size of a security key */
+#define B43_SEC_KEYSIZE 16
+/* Max number of group keys */
+#define B43_NR_GROUP_KEYS 4
+/* Max number of pairwise keys */
+#define B43_NR_PAIRWISE_KEYS 50
+/* Security algorithms. */
+enum {
+ B43_SEC_ALGO_NONE = 0, /* unencrypted, as of TX header. */
+ B43_SEC_ALGO_WEP40,
+ B43_SEC_ALGO_TKIP,
+ B43_SEC_ALGO_AES,
+ B43_SEC_ALGO_WEP104,
+ B43_SEC_ALGO_AES_LEGACY,
+};
+
+struct b43_dmaring;
+
+/* The firmware file header */
+#define B43_FW_TYPE_UCODE 'u'
+#define B43_FW_TYPE_PCM 'p'
+#define B43_FW_TYPE_IV 'i'
+struct b43_fw_header {
+ /* File type */
+ u8 type;
+ /* File format version */
+ u8 ver;
+ u8 __padding[2];
+ /* Size of the data. For ucode and PCM this is in bytes.
+ * For IV this is number-of-ivs. */
+ __be32 size;
+} __packed;
+
+/* Initial Value file format */
+#define B43_IV_OFFSET_MASK 0x7FFF
+#define B43_IV_32BIT 0x8000
+struct b43_iv {
+ __be16 offset_size;
+ union {
+ __be16 d16;
+ __be32 d32;
+ } data __packed;
+} __packed;
+
+
+/* Data structures for DMA transmission, per 80211 core. */
+struct b43_dma {
+ struct b43_dmaring *tx_ring_AC_BK; /* Background */
+ struct b43_dmaring *tx_ring_AC_BE; /* Best Effort */
+ struct b43_dmaring *tx_ring_AC_VI; /* Video */
+ struct b43_dmaring *tx_ring_AC_VO; /* Voice */
+ struct b43_dmaring *tx_ring_mcast; /* Multicast */
+
+ struct b43_dmaring *rx_ring;
+
+ u32 translation; /* Routing bits */
+ bool translation_in_low; /* Should translation bit go into low addr? */
+ bool parity; /* Check for parity */
+};
+
+struct b43_pio_txqueue;
+struct b43_pio_rxqueue;
+
+/* Data structures for PIO transmission, per 80211 core. */
+struct b43_pio {
+ struct b43_pio_txqueue *tx_queue_AC_BK; /* Background */
+ struct b43_pio_txqueue *tx_queue_AC_BE; /* Best Effort */
+ struct b43_pio_txqueue *tx_queue_AC_VI; /* Video */
+ struct b43_pio_txqueue *tx_queue_AC_VO; /* Voice */
+ struct b43_pio_txqueue *tx_queue_mcast; /* Multicast */
+
+ struct b43_pio_rxqueue *rx_queue;
+};
+
+/* Context information for a noise calculation (Link Quality). */
+struct b43_noise_calculation {
+ bool calculation_running;
+ u8 nr_samples;
+ s8 samples[8][4];
+};
+
+struct b43_stats {
+ u8 link_noise;
+};
+
+struct b43_key {
+ /* If keyconf is NULL, this key is disabled.
+ * keyconf is a cookie. Don't derefenrence it outside of the set_key
+ * path, because b43 doesn't own it. */
+ struct ieee80211_key_conf *keyconf;
+ u8 algorithm;
+};
+
+/* SHM offsets to the QOS data structures for the 4 different queues. */
+#define B43_QOS_QUEUE_NUM 4
+#define B43_QOS_PARAMS(queue) (B43_SHM_SH_EDCFQ + \
+ (B43_NR_QOSPARAMS * sizeof(u16) * (queue)))
+#define B43_QOS_BACKGROUND B43_QOS_PARAMS(0)
+#define B43_QOS_BESTEFFORT B43_QOS_PARAMS(1)
+#define B43_QOS_VIDEO B43_QOS_PARAMS(2)
+#define B43_QOS_VOICE B43_QOS_PARAMS(3)
+
+/* QOS parameter hardware data structure offsets. */
+#define B43_NR_QOSPARAMS 16
+enum {
+ B43_QOSPARAM_TXOP = 0,
+ B43_QOSPARAM_CWMIN,
+ B43_QOSPARAM_CWMAX,
+ B43_QOSPARAM_CWCUR,
+ B43_QOSPARAM_AIFS,
+ B43_QOSPARAM_BSLOTS,
+ B43_QOSPARAM_REGGAP,
+ B43_QOSPARAM_STATUS,
+};
+
+/* QOS parameters for a queue. */
+struct b43_qos_params {
+ /* The QOS parameters */
+ struct ieee80211_tx_queue_params p;
+};
+
+struct b43_wl;
+
+/* The type of the firmware file. */
+enum b43_firmware_file_type {
+ B43_FWTYPE_PROPRIETARY,
+ B43_FWTYPE_OPENSOURCE,
+ B43_NR_FWTYPES,
+};
+
+/* Context data for fetching firmware. */
+struct b43_request_fw_context {
+ /* The device we are requesting the fw for. */
+ struct b43_wldev *dev;
+ /* a pointer to the firmware object */
+ const struct firmware *blob;
+ /* The type of firmware to request. */
+ enum b43_firmware_file_type req_type;
+ /* Error messages for each firmware type. */
+ char errors[B43_NR_FWTYPES][128];
+ /* Temporary buffer for storing the firmware name. */
+ char fwname[64];
+ /* A fatal error occurred while requesting. Firmware request
+ * can not continue, as any other request will also fail. */
+ int fatal_failure;
+};
+
+/* In-memory representation of a cached microcode file. */
+struct b43_firmware_file {
+ const char *filename;
+ const struct firmware *data;
+ /* Type of the firmware file name. Note that this does only indicate
+ * the type by the firmware name. NOT the file contents.
+ * If you want to check for proprietary vs opensource, use (struct b43_firmware)->opensource
+ * instead! The (struct b43_firmware)->opensource flag is derived from the actual firmware
+ * binary code, not just the filename.
+ */
+ enum b43_firmware_file_type type;
+};
+
+enum b43_firmware_hdr_format {
+ B43_FW_HDR_598,
+ B43_FW_HDR_410,
+ B43_FW_HDR_351,
+};
+
+/* Pointers to the firmware data and meta information about it. */
+struct b43_firmware {
+ /* Microcode */
+ struct b43_firmware_file ucode;
+ /* PCM code */
+ struct b43_firmware_file pcm;
+ /* Initial MMIO values for the firmware */
+ struct b43_firmware_file initvals;
+ /* Initial MMIO values for the firmware, band-specific */
+ struct b43_firmware_file initvals_band;
+
+ /* Firmware revision */
+ u16 rev;
+ /* Firmware patchlevel */
+ u16 patch;
+
+ /* Format of header used by firmware */
+ enum b43_firmware_hdr_format hdr_format;
+
+ /* Set to true, if we are using an opensource firmware.
+ * Use this to check for proprietary vs opensource. */
+ bool opensource;
+ /* Set to true, if the core needs a PCM firmware, but
+ * we failed to load one. This is always false for
+ * core rev > 10, as these don't need PCM firmware. */
+ bool pcm_request_failed;
+};
+
+enum b43_band {
+ B43_BAND_2G = 0,
+ B43_BAND_5G_LO = 1,
+ B43_BAND_5G_MI = 2,
+ B43_BAND_5G_HI = 3,
+};
+
+/* Device (802.11 core) initialization status. */
+enum {
+ B43_STAT_UNINIT = 0, /* Uninitialized. */
+ B43_STAT_INITIALIZED = 1, /* Initialized, but not started, yet. */
+ B43_STAT_STARTED = 2, /* Up and running. */
+};
+#define b43_status(wldev) atomic_read(&(wldev)->__init_status)
+#define b43_set_status(wldev, stat) do { \
+ atomic_set(&(wldev)->__init_status, (stat)); \
+ smp_wmb(); \
+ } while (0)
+
+/* Data structure for one wireless device (802.11 core) */
+struct b43_wldev {
+ struct b43_bus_dev *dev;
+ struct b43_wl *wl;
+ /* a completion event structure needed if this call is asynchronous */
+ struct completion fw_load_complete;
+
+ /* The device initialization status.
+ * Use b43_status() to query. */
+ atomic_t __init_status;
+
+ bool bad_frames_preempt; /* Use "Bad Frames Preemption" (default off) */
+ bool dfq_valid; /* Directed frame queue valid (IBSS PS mode, ATIM) */
+ bool radio_hw_enable; /* saved state of radio hardware enabled state */
+ bool qos_enabled; /* TRUE, if QoS is used. */
+ bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is enabled. */
+ bool use_pio; /* TRUE if next init should use PIO */
+
+ /* PHY/Radio device. */
+ struct b43_phy phy;
+
+ union {
+ /* DMA engines. */
+ struct b43_dma dma;
+ /* PIO engines. */
+ struct b43_pio pio;
+ };
+ /* Use b43_using_pio_transfers() to check whether we are using
+ * DMA or PIO data transfers. */
+ bool __using_pio_transfers;
+
+ /* Various statistics about the physical device. */
+ struct b43_stats stats;
+
+ /* Reason code of the last interrupt. */
+ u32 irq_reason;
+ u32 dma_reason[6];
+ /* The currently active generic-interrupt mask. */
+ u32 irq_mask;
+
+ /* Link Quality calculation context. */
+ struct b43_noise_calculation noisecalc;
+ /* if > 0 MAC is suspended. if == 0 MAC is enabled. */
+ int mac_suspended;
+
+ /* Periodic tasks */
+ struct delayed_work periodic_work;
+ unsigned int periodic_state;
+
+ struct work_struct restart_work;
+
+ /* encryption/decryption */
+ u16 ktp; /* Key table pointer */
+ struct b43_key key[B43_NR_GROUP_KEYS * 2 + B43_NR_PAIRWISE_KEYS];
+
+ /* Firmware data */
+ struct b43_firmware fw;
+
+ /* Devicelist in struct b43_wl (all 802.11 cores) */
+ struct list_head list;
+
+ /* Debugging stuff follows. */
+#ifdef CPTCFG_B43_DEBUG
+ struct b43_dfsentry *dfsentry;
+ unsigned int irq_count;
+ unsigned int irq_bit_count[32];
+ unsigned int tx_count;
+ unsigned int rx_count;
+#endif
+};
+
+/* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */
+struct b43_wl {
+ /* Pointer to the active wireless device on this chip */
+ struct b43_wldev *current_dev;
+ /* Pointer to the ieee80211 hardware data structure */
+ struct ieee80211_hw *hw;
+
+ /* Global driver mutex. Every operation must run with this mutex locked. */
+ struct mutex mutex;
+ /* Hard-IRQ spinlock. This lock protects things used in the hard-IRQ
+ * handler, only. This basically is just the IRQ mask register. */
+ spinlock_t hardirq_lock;
+
+ /* Set this if we call ieee80211_register_hw() and check if we call
+ * ieee80211_unregister_hw(). */
+ bool hw_registred;
+
+ /* We can only have one operating interface (802.11 core)
+ * at a time. General information about this interface follows.
+ */
+
+ struct ieee80211_vif *vif;
+ /* The MAC address of the operating interface. */
+ u8 mac_addr[ETH_ALEN];
+ /* Current BSSID */
+ u8 bssid[ETH_ALEN];
+ /* Interface type. (NL80211_IFTYPE_XXX) */
+ int if_type;
+ /* Is the card operating in AP, STA or IBSS mode? */
+ bool operating;
+ /* filter flags */
+ unsigned int filter_flags;
+ /* Stats about the wireless interface */
+ struct ieee80211_low_level_stats ieee_stats;
+
+#ifdef CPTCFG_B43_HWRNG
+ struct hwrng rng;
+ bool rng_initialized;
+ char rng_name[30 + 1];
+#endif /* CPTCFG_B43_HWRNG */
+
+ bool radiotap_enabled;
+ bool radio_enabled;
+
+ /* The beacon we are currently using (AP or IBSS mode). */
+ struct sk_buff *current_beacon;
+ bool beacon0_uploaded;
+ bool beacon1_uploaded;
+ bool beacon_templates_virgin; /* Never wrote the templates? */
+ struct work_struct beacon_update_trigger;
+ spinlock_t beacon_lock;
+
+ /* The current QOS parameters for the 4 queues. */
+ struct b43_qos_params qos_params[B43_QOS_QUEUE_NUM];
+
+ /* Work for adjustment of the transmission power.
+ * This is scheduled when we determine that the actual TX output
+ * power doesn't match what we want. */
+ struct work_struct txpower_adjust_work;
+
+ /* Packet transmit work */
+ struct work_struct tx_work;
+
+ /* Queue of packets to be transmitted. */
+ struct sk_buff_head tx_queue[B43_QOS_QUEUE_NUM];
+
+ /* Flag that implement the queues stopping. */
+ bool tx_queue_stopped[B43_QOS_QUEUE_NUM];
+
+ /* firmware loading work */
+ struct work_struct firmware_load;
+
+ /* The device LEDs. */
+ struct b43_leds leds;
+
+ /* Kmalloc'ed scratch space for PIO TX/RX. Protected by wl->mutex. */
+ u8 pio_scratchspace[118] __attribute__((__aligned__(8)));
+ u8 pio_tailspace[4] __attribute__((__aligned__(8)));
+};
+
+static inline struct b43_wl *hw_to_b43_wl(struct ieee80211_hw *hw)
+{
+ return hw->priv;
+}
+
+static inline struct b43_wldev *dev_to_b43_wldev(struct device *dev)
+{
+ struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
+ return ssb_get_drvdata(ssb_dev);
+}
+
+/* Is the device operating in a specified mode (NL80211_IFTYPE_XXX). */
+static inline int b43_is_mode(struct b43_wl *wl, int type)
+{
+ return (wl->operating && wl->if_type == type);
+}
+
+/**
+ * b43_current_band - Returns the currently used band.
+ * Returns one of NL80211_BAND_2GHZ and NL80211_BAND_5GHZ.
+ */
+static inline enum nl80211_band b43_current_band(struct b43_wl *wl)
+{
+ return wl->hw->conf.chandef.chan->band;
+}
+
+static inline int b43_bus_may_powerdown(struct b43_wldev *wldev)
+{
+ return wldev->dev->bus_may_powerdown(wldev->dev);
+}
+static inline int b43_bus_powerup(struct b43_wldev *wldev, bool dynamic_pctl)
+{
+ return wldev->dev->bus_powerup(wldev->dev, dynamic_pctl);
+}
+static inline int b43_device_is_enabled(struct b43_wldev *wldev)
+{
+ return wldev->dev->device_is_enabled(wldev->dev);
+}
+static inline void b43_device_enable(struct b43_wldev *wldev,
+ u32 core_specific_flags)
+{
+ wldev->dev->device_enable(wldev->dev, core_specific_flags);
+}
+static inline void b43_device_disable(struct b43_wldev *wldev,
+ u32 core_specific_flags)
+{
+ wldev->dev->device_disable(wldev->dev, core_specific_flags);
+}
+
+static inline u16 b43_read16(struct b43_wldev *dev, u16 offset)
+{
+ return dev->dev->read16(dev->dev, offset);
+}
+
+static inline void b43_write16(struct b43_wldev *dev, u16 offset, u16 value)
+{
+ dev->dev->write16(dev->dev, offset, value);
+}
+
+/* To optimize this check for flush_writes on BCM47XX_BCMA only. */
+static inline void b43_write16f(struct b43_wldev *dev, u16 offset, u16 value)
+{
+ b43_write16(dev, offset, value);
+#if defined(CONFIG_BCM47XX_BCMA)
+ if (dev->dev->flush_writes)
+ b43_read16(dev, offset);
+#endif
+}
+
+static inline void b43_maskset16(struct b43_wldev *dev, u16 offset, u16 mask,
+ u16 set)
+{
+ b43_write16(dev, offset, (b43_read16(dev, offset) & mask) | set);
+}
+
+static inline u32 b43_read32(struct b43_wldev *dev, u16 offset)
+{
+ return dev->dev->read32(dev->dev, offset);
+}
+
+static inline void b43_write32(struct b43_wldev *dev, u16 offset, u32 value)
+{
+ dev->dev->write32(dev->dev, offset, value);
+}
+
+static inline void b43_maskset32(struct b43_wldev *dev, u16 offset, u32 mask,
+ u32 set)
+{
+ b43_write32(dev, offset, (b43_read32(dev, offset) & mask) | set);
+}
+
+static inline void b43_block_read(struct b43_wldev *dev, void *buffer,
+ size_t count, u16 offset, u8 reg_width)
+{
+ dev->dev->block_read(dev->dev, buffer, count, offset, reg_width);
+}
+
+static inline void b43_block_write(struct b43_wldev *dev, const void *buffer,
+ size_t count, u16 offset, u8 reg_width)
+{
+ dev->dev->block_write(dev->dev, buffer, count, offset, reg_width);
+}
+
+static inline bool b43_using_pio_transfers(struct b43_wldev *dev)
+{
+ return dev->__using_pio_transfers;
+}
+
+/* Message printing */
+__printf(2, 3) void b43info(struct b43_wl *wl, const char *fmt, ...);
+__printf(2, 3) void b43err(struct b43_wl *wl, const char *fmt, ...);
+__printf(2, 3) void b43warn(struct b43_wl *wl, const char *fmt, ...);
+__printf(2, 3) void b43dbg(struct b43_wl *wl, const char *fmt, ...);
+
+
+/* A WARN_ON variant that vanishes when b43 debugging is disabled.
+ * This _also_ evaluates the arg with debugging disabled. */
+#if B43_DEBUG
+# define B43_WARN_ON(x) WARN_ON(x)
+#else
+static inline bool __b43_warn_on_dummy(bool x) { return x; }
+# define B43_WARN_ON(x) __b43_warn_on_dummy(unlikely(!!(x)))
+#endif
+
+/* Convert an integer to a Q5.2 value */
+#define INT_TO_Q52(i) ((i) << 2)
+/* Convert a Q5.2 value to an integer (precision loss!) */
+#define Q52_TO_INT(q52) ((q52) >> 2)
+/* Macros for printing a value in Q5.2 format */
+#define Q52_FMT "%u.%u"
+#define Q52_ARG(q52) Q52_TO_INT(q52), ((((q52) & 0x3) * 100) / 4)
+
+#endif /* B43_H_ */