diff options
Diffstat (limited to 'drivers/net/wireless/broadcom/brcm80211/brcmsmac/d11.h')
| -rw-r--r-- | drivers/net/wireless/broadcom/brcm80211/brcmsmac/d11.h | 1902 |
1 files changed, 1902 insertions, 0 deletions
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/d11.h b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/d11.h new file mode 100644 index 0000000..9035cc4 --- /dev/null +++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/d11.h @@ -0,0 +1,1902 @@ +/* + * Copyright (c) 2010 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _BRCM_D11_H_ +#define _BRCM_D11_H_ + +#include <linux/ieee80211.h> + +#include <defs.h> +#include "pub.h" +#include "dma.h" + +/* RX FIFO numbers */ +#define RX_FIFO 0 /* data and ctl frames */ +#define RX_TXSTATUS_FIFO 3 /* RX fifo for tx status packages */ + +/* TX FIFO numbers using WME Access Category */ +#define TX_AC_BK_FIFO 0 /* Background TX FIFO */ +#define TX_AC_BE_FIFO 1 /* Best-Effort TX FIFO */ +#define TX_AC_VI_FIFO 2 /* Video TX FIFO */ +#define TX_AC_VO_FIFO 3 /* Voice TX FIFO */ +#define TX_BCMC_FIFO 4 /* Broadcast/Multicast TX FIFO */ +#define TX_ATIM_FIFO 5 /* TX fifo for ATIM window info */ + +/* Addr is byte address used by SW; offset is word offset used by uCode */ + +/* Per AC TX limit settings */ +#define M_AC_TXLMT_BASE_ADDR (0x180 * 2) +#define M_AC_TXLMT_ADDR(_ac) (M_AC_TXLMT_BASE_ADDR + (2 * (_ac))) + +/* Legacy TX FIFO numbers */ +#define TX_DATA_FIFO TX_AC_BE_FIFO +#define TX_CTL_FIFO TX_AC_VO_FIFO + +#define WL_RSSI_ANT_MAX 4 /* max possible rx antennas */ + +struct intctrlregs { + u32 intstatus; + u32 intmask; +}; + +/* PIO structure, + * support two PIO format: 2 bytes access and 4 bytes access + * basic FIFO register set is per channel(transmit or receive) + * a pair of channels is defined for convenience + */ +/* 2byte-wide pio register set per channel(xmt or rcv) */ +struct pio2regs { + u16 fifocontrol; + u16 fifodata; + u16 fifofree; /* only valid in xmt channel, not in rcv channel */ + u16 PAD; +}; + +/* a pair of pio channels(tx and rx) */ +struct pio2regp { + struct pio2regs tx; + struct pio2regs rx; +}; + +/* 4byte-wide pio register set per channel(xmt or rcv) */ +struct pio4regs { + u32 fifocontrol; + u32 fifodata; +}; + +/* a pair of pio channels(tx and rx) */ +struct pio4regp { + struct pio4regs tx; + struct pio4regs rx; +}; + +/* read: 32-bit register that can be read as 32-bit or as 2 16-bit + * write: only low 16b-it half can be written + */ +union pmqreg { + u32 pmqhostdata; /* read only! */ + struct { + u16 pmqctrlstatus; /* read/write */ + u16 PAD; + } w; +}; + +struct fifo64 { + struct dma64regs dmaxmt; /* dma tx */ + struct pio4regs piotx; /* pio tx */ + struct dma64regs dmarcv; /* dma rx */ + struct pio4regs piorx; /* pio rx */ +}; + +/* + * Host Interface Registers + */ +struct d11regs { + /* Device Control ("semi-standard host registers") */ + u32 PAD[3]; /* 0x0 - 0x8 */ + u32 biststatus; /* 0xC */ + u32 biststatus2; /* 0x10 */ + u32 PAD; /* 0x14 */ + u32 gptimer; /* 0x18 */ + u32 usectimer; /* 0x1c *//* for corerev >= 26 */ + + /* Interrupt Control *//* 0x20 */ + struct intctrlregs intctrlregs[8]; + + u32 PAD[40]; /* 0x60 - 0xFC */ + + u32 intrcvlazy[4]; /* 0x100 - 0x10C */ + + u32 PAD[4]; /* 0x110 - 0x11c */ + + u32 maccontrol; /* 0x120 */ + u32 maccommand; /* 0x124 */ + u32 macintstatus; /* 0x128 */ + u32 macintmask; /* 0x12C */ + + /* Transmit Template Access */ + u32 tplatewrptr; /* 0x130 */ + u32 tplatewrdata; /* 0x134 */ + u32 PAD[2]; /* 0x138 - 0x13C */ + + /* PMQ registers */ + union pmqreg pmqreg; /* 0x140 */ + u32 pmqpatl; /* 0x144 */ + u32 pmqpath; /* 0x148 */ + u32 PAD; /* 0x14C */ + + u32 chnstatus; /* 0x150 */ + u32 psmdebug; /* 0x154 */ + u32 phydebug; /* 0x158 */ + u32 machwcap; /* 0x15C */ + + /* Extended Internal Objects */ + u32 objaddr; /* 0x160 */ + u32 objdata; /* 0x164 */ + u32 PAD[2]; /* 0x168 - 0x16c */ + + u32 frmtxstatus; /* 0x170 */ + u32 frmtxstatus2; /* 0x174 */ + u32 PAD[2]; /* 0x178 - 0x17c */ + + /* TSF host access */ + u32 tsf_timerlow; /* 0x180 */ + u32 tsf_timerhigh; /* 0x184 */ + u32 tsf_cfprep; /* 0x188 */ + u32 tsf_cfpstart; /* 0x18c */ + u32 tsf_cfpmaxdur32; /* 0x190 */ + u32 PAD[3]; /* 0x194 - 0x19c */ + + u32 maccontrol1; /* 0x1a0 */ + u32 machwcap1; /* 0x1a4 */ + u32 PAD[14]; /* 0x1a8 - 0x1dc */ + + /* Clock control and hardware workarounds*/ + u32 clk_ctl_st; /* 0x1e0 */ + u32 hw_war; + u32 d11_phypllctl; /* the phypll request/avail bits are + * moved to clk_ctl_st + */ + u32 PAD[5]; /* 0x1ec - 0x1fc */ + + /* 0x200-0x37F dma/pio registers */ + struct fifo64 fifo64regs[6]; + + /* FIFO diagnostic port access */ + struct dma32diag dmafifo; /* 0x380 - 0x38C */ + + u32 aggfifocnt; /* 0x390 */ + u32 aggfifodata; /* 0x394 */ + u32 PAD[16]; /* 0x398 - 0x3d4 */ + u16 radioregaddr; /* 0x3d8 */ + u16 radioregdata; /* 0x3da */ + + /* + * time delay between the change on rf disable input and + * radio shutdown + */ + u32 rfdisabledly; /* 0x3DC */ + + /* PHY register access */ + u16 phyversion; /* 0x3e0 - 0x0 */ + u16 phybbconfig; /* 0x3e2 - 0x1 */ + u16 phyadcbias; /* 0x3e4 - 0x2 Bphy only */ + u16 phyanacore; /* 0x3e6 - 0x3 pwwrdwn on aphy */ + u16 phyrxstatus0; /* 0x3e8 - 0x4 */ + u16 phyrxstatus1; /* 0x3ea - 0x5 */ + u16 phycrsth; /* 0x3ec - 0x6 */ + u16 phytxerror; /* 0x3ee - 0x7 */ + u16 phychannel; /* 0x3f0 - 0x8 */ + u16 PAD[1]; /* 0x3f2 - 0x9 */ + u16 phytest; /* 0x3f4 - 0xa */ + u16 phy4waddr; /* 0x3f6 - 0xb */ + u16 phy4wdatahi; /* 0x3f8 - 0xc */ + u16 phy4wdatalo; /* 0x3fa - 0xd */ + u16 phyregaddr; /* 0x3fc - 0xe */ + u16 phyregdata; /* 0x3fe - 0xf */ + + /* IHR *//* 0x400 - 0x7FE */ + + /* RXE Block */ + u16 PAD[3]; /* 0x400 - 0x406 */ + u16 rcv_fifo_ctl; /* 0x406 */ + u16 PAD; /* 0x408 - 0x40a */ + u16 rcv_frm_cnt; /* 0x40a */ + u16 PAD[4]; /* 0x40a - 0x414 */ + u16 rssi; /* 0x414 */ + u16 PAD[5]; /* 0x414 - 0x420 */ + u16 rcm_ctl; /* 0x420 */ + u16 rcm_mat_data; /* 0x422 */ + u16 rcm_mat_mask; /* 0x424 */ + u16 rcm_mat_dly; /* 0x426 */ + u16 rcm_cond_mask_l; /* 0x428 */ + u16 rcm_cond_mask_h; /* 0x42A */ + u16 rcm_cond_dly; /* 0x42C */ + u16 PAD[1]; /* 0x42E */ + u16 ext_ihr_addr; /* 0x430 */ + u16 ext_ihr_data; /* 0x432 */ + u16 rxe_phyrs_2; /* 0x434 */ + u16 rxe_phyrs_3; /* 0x436 */ + u16 phy_mode; /* 0x438 */ + u16 rcmta_ctl; /* 0x43a */ + u16 rcmta_size; /* 0x43c */ + u16 rcmta_addr0; /* 0x43e */ + u16 rcmta_addr1; /* 0x440 */ + u16 rcmta_addr2; /* 0x442 */ + u16 PAD[30]; /* 0x444 - 0x480 */ + + /* PSM Block *//* 0x480 - 0x500 */ + + u16 PAD; /* 0x480 */ + u16 psm_maccontrol_h; /* 0x482 */ + u16 psm_macintstatus_l; /* 0x484 */ + u16 psm_macintstatus_h; /* 0x486 */ + u16 psm_macintmask_l; /* 0x488 */ + u16 psm_macintmask_h; /* 0x48A */ + u16 PAD; /* 0x48C */ + u16 psm_maccommand; /* 0x48E */ + u16 psm_brc; /* 0x490 */ + u16 psm_phy_hdr_param; /* 0x492 */ + u16 psm_postcard; /* 0x494 */ + u16 psm_pcard_loc_l; /* 0x496 */ + u16 psm_pcard_loc_h; /* 0x498 */ + u16 psm_gpio_in; /* 0x49A */ + u16 psm_gpio_out; /* 0x49C */ + u16 psm_gpio_oe; /* 0x49E */ + + u16 psm_bred_0; /* 0x4A0 */ + u16 psm_bred_1; /* 0x4A2 */ + u16 psm_bred_2; /* 0x4A4 */ + u16 psm_bred_3; /* 0x4A6 */ + u16 psm_brcl_0; /* 0x4A8 */ + u16 psm_brcl_1; /* 0x4AA */ + u16 psm_brcl_2; /* 0x4AC */ + u16 psm_brcl_3; /* 0x4AE */ + u16 psm_brpo_0; /* 0x4B0 */ + u16 psm_brpo_1; /* 0x4B2 */ + u16 psm_brpo_2; /* 0x4B4 */ + u16 psm_brpo_3; /* 0x4B6 */ + u16 psm_brwk_0; /* 0x4B8 */ + u16 psm_brwk_1; /* 0x4BA */ + u16 psm_brwk_2; /* 0x4BC */ + u16 psm_brwk_3; /* 0x4BE */ + + u16 psm_base_0; /* 0x4C0 */ + u16 psm_base_1; /* 0x4C2 */ + u16 psm_base_2; /* 0x4C4 */ + u16 psm_base_3; /* 0x4C6 */ + u16 psm_base_4; /* 0x4C8 */ + u16 psm_base_5; /* 0x4CA */ + u16 psm_base_6; /* 0x4CC */ + u16 psm_pc_reg_0; /* 0x4CE */ + u16 psm_pc_reg_1; /* 0x4D0 */ + u16 psm_pc_reg_2; /* 0x4D2 */ + u16 psm_pc_reg_3; /* 0x4D4 */ + u16 PAD[0xD]; /* 0x4D6 - 0x4DE */ + u16 psm_corectlsts; /* 0x4f0 *//* Corerev >= 13 */ + u16 PAD[0x7]; /* 0x4f2 - 0x4fE */ + + /* TXE0 Block *//* 0x500 - 0x580 */ + u16 txe_ctl; /* 0x500 */ + u16 txe_aux; /* 0x502 */ + u16 txe_ts_loc; /* 0x504 */ + u16 txe_time_out; /* 0x506 */ + u16 txe_wm_0; /* 0x508 */ + u16 txe_wm_1; /* 0x50A */ + u16 txe_phyctl; /* 0x50C */ + u16 txe_status; /* 0x50E */ + u16 txe_mmplcp0; /* 0x510 */ + u16 txe_mmplcp1; /* 0x512 */ + u16 txe_phyctl1; /* 0x514 */ + + u16 PAD[0x05]; /* 0x510 - 0x51E */ + + /* Transmit control */ + u16 xmtfifodef; /* 0x520 */ + u16 xmtfifo_frame_cnt; /* 0x522 *//* Corerev >= 16 */ + u16 xmtfifo_byte_cnt; /* 0x524 *//* Corerev >= 16 */ + u16 xmtfifo_head; /* 0x526 *//* Corerev >= 16 */ + u16 xmtfifo_rd_ptr; /* 0x528 *//* Corerev >= 16 */ + u16 xmtfifo_wr_ptr; /* 0x52A *//* Corerev >= 16 */ + u16 xmtfifodef1; /* 0x52C *//* Corerev >= 16 */ + + u16 PAD[0x09]; /* 0x52E - 0x53E */ + + u16 xmtfifocmd; /* 0x540 */ + u16 xmtfifoflush; /* 0x542 */ + u16 xmtfifothresh; /* 0x544 */ + u16 xmtfifordy; /* 0x546 */ + u16 xmtfifoprirdy; /* 0x548 */ + u16 xmtfiforqpri; /* 0x54A */ + u16 xmttplatetxptr; /* 0x54C */ + u16 PAD; /* 0x54E */ + u16 xmttplateptr; /* 0x550 */ + u16 smpl_clct_strptr; /* 0x552 *//* Corerev >= 22 */ + u16 smpl_clct_stpptr; /* 0x554 *//* Corerev >= 22 */ + u16 smpl_clct_curptr; /* 0x556 *//* Corerev >= 22 */ + u16 PAD[0x04]; /* 0x558 - 0x55E */ + u16 xmttplatedatalo; /* 0x560 */ + u16 xmttplatedatahi; /* 0x562 */ + + u16 PAD[2]; /* 0x564 - 0x566 */ + + u16 xmtsel; /* 0x568 */ + u16 xmttxcnt; /* 0x56A */ + u16 xmttxshmaddr; /* 0x56C */ + + u16 PAD[0x09]; /* 0x56E - 0x57E */ + + /* TXE1 Block */ + u16 PAD[0x40]; /* 0x580 - 0x5FE */ + + /* TSF Block */ + u16 PAD[0X02]; /* 0x600 - 0x602 */ + u16 tsf_cfpstrt_l; /* 0x604 */ + u16 tsf_cfpstrt_h; /* 0x606 */ + u16 PAD[0X05]; /* 0x608 - 0x610 */ + u16 tsf_cfppretbtt; /* 0x612 */ + u16 PAD[0XD]; /* 0x614 - 0x62C */ + u16 tsf_clk_frac_l; /* 0x62E */ + u16 tsf_clk_frac_h; /* 0x630 */ + u16 PAD[0X14]; /* 0x632 - 0x658 */ + u16 tsf_random; /* 0x65A */ + u16 PAD[0x05]; /* 0x65C - 0x664 */ + /* GPTimer 2 registers */ + u16 tsf_gpt2_stat; /* 0x666 */ + u16 tsf_gpt2_ctr_l; /* 0x668 */ + u16 tsf_gpt2_ctr_h; /* 0x66A */ + u16 tsf_gpt2_val_l; /* 0x66C */ + u16 tsf_gpt2_val_h; /* 0x66E */ + u16 tsf_gptall_stat; /* 0x670 */ + u16 PAD[0x07]; /* 0x672 - 0x67E */ + + /* IFS Block */ + u16 ifs_sifs_rx_tx_tx; /* 0x680 */ + u16 ifs_sifs_nav_tx; /* 0x682 */ + u16 ifs_slot; /* 0x684 */ + u16 PAD; /* 0x686 */ + u16 ifs_ctl; /* 0x688 */ + u16 PAD[0x3]; /* 0x68a - 0x68F */ + u16 ifsstat; /* 0x690 */ + u16 ifsmedbusyctl; /* 0x692 */ + u16 iftxdur; /* 0x694 */ + u16 PAD[0x3]; /* 0x696 - 0x69b */ + /* EDCF support in dot11macs */ + u16 ifs_aifsn; /* 0x69c */ + u16 ifs_ctl1; /* 0x69e */ + + /* slow clock registers */ + u16 scc_ctl; /* 0x6a0 */ + u16 scc_timer_l; /* 0x6a2 */ + u16 scc_timer_h; /* 0x6a4 */ + u16 scc_frac; /* 0x6a6 */ + u16 scc_fastpwrup_dly; /* 0x6a8 */ + u16 scc_per; /* 0x6aa */ + u16 scc_per_frac; /* 0x6ac */ + u16 scc_cal_timer_l; /* 0x6ae */ + u16 scc_cal_timer_h; /* 0x6b0 */ + u16 PAD; /* 0x6b2 */ + + u16 PAD[0x26]; + + /* NAV Block */ + u16 nav_ctl; /* 0x700 */ + u16 navstat; /* 0x702 */ + u16 PAD[0x3e]; /* 0x702 - 0x77E */ + + /* WEP/PMQ Block *//* 0x780 - 0x7FE */ + u16 PAD[0x20]; /* 0x780 - 0x7BE */ + + u16 wepctl; /* 0x7C0 */ + u16 wepivloc; /* 0x7C2 */ + u16 wepivkey; /* 0x7C4 */ + u16 wepwkey; /* 0x7C6 */ + + u16 PAD[4]; /* 0x7C8 - 0x7CE */ + u16 pcmctl; /* 0X7D0 */ + u16 pcmstat; /* 0X7D2 */ + u16 PAD[6]; /* 0x7D4 - 0x7DE */ + + u16 pmqctl; /* 0x7E0 */ + u16 pmqstatus; /* 0x7E2 */ + u16 pmqpat0; /* 0x7E4 */ + u16 pmqpat1; /* 0x7E6 */ + u16 pmqpat2; /* 0x7E8 */ + + u16 pmqdat; /* 0x7EA */ + u16 pmqdator; /* 0x7EC */ + u16 pmqhst; /* 0x7EE */ + u16 pmqpath0; /* 0x7F0 */ + u16 pmqpath1; /* 0x7F2 */ + u16 pmqpath2; /* 0x7F4 */ + u16 pmqdath; /* 0x7F6 */ + + u16 PAD[0x04]; /* 0x7F8 - 0x7FE */ + + /* SHM *//* 0x800 - 0xEFE */ + u16 PAD[0x380]; /* 0x800 - 0xEFE */ +}; + +/* d11 register field offset */ +#define D11REGOFFS(field) offsetof(struct d11regs, field) + +#define PIHR_BASE 0x0400 /* byte address of packed IHR region */ + +/* biststatus */ +#define BT_DONE (1U << 31) /* bist done */ +#define BT_B2S (1 << 30) /* bist2 ram summary bit */ + +/* intstatus and intmask */ +#define I_PC (1 << 10) /* pci descriptor error */ +#define I_PD (1 << 11) /* pci data error */ +#define I_DE (1 << 12) /* descriptor protocol error */ +#define I_RU (1 << 13) /* receive descriptor underflow */ +#define I_RO (1 << 14) /* receive fifo overflow */ +#define I_XU (1 << 15) /* transmit fifo underflow */ +#define I_RI (1 << 16) /* receive interrupt */ +#define I_XI (1 << 24) /* transmit interrupt */ + +/* interrupt receive lazy */ +#define IRL_TO_MASK 0x00ffffff /* timeout */ +#define IRL_FC_MASK 0xff000000 /* frame count */ +#define IRL_FC_SHIFT 24 /* frame count */ + +/*== maccontrol register ==*/ +#define MCTL_GMODE (1U << 31) +#define MCTL_DISCARD_PMQ (1 << 30) +#define MCTL_TBTTHOLD (1 << 28) +#define MCTL_WAKE (1 << 26) +#define MCTL_HPS (1 << 25) +#define MCTL_PROMISC (1 << 24) +#define MCTL_KEEPBADFCS (1 << 23) +#define MCTL_KEEPCONTROL (1 << 22) +#define MCTL_PHYLOCK (1 << 21) +#define MCTL_BCNS_PROMISC (1 << 20) +#define MCTL_LOCK_RADIO (1 << 19) +#define MCTL_AP (1 << 18) +#define MCTL_INFRA (1 << 17) +#define MCTL_BIGEND (1 << 16) +#define MCTL_GPOUT_SEL_MASK (3 << 14) +#define MCTL_GPOUT_SEL_SHIFT 14 +#define MCTL_EN_PSMDBG (1 << 13) +#define MCTL_IHR_EN (1 << 10) +#define MCTL_SHM_UPPER (1 << 9) +#define MCTL_SHM_EN (1 << 8) +#define MCTL_PSM_JMP_0 (1 << 2) +#define MCTL_PSM_RUN (1 << 1) +#define MCTL_EN_MAC (1 << 0) + +/*== maccommand register ==*/ +#define MCMD_BCN0VLD (1 << 0) +#define MCMD_BCN1VLD (1 << 1) +#define MCMD_DIRFRMQVAL (1 << 2) +#define MCMD_CCA (1 << 3) +#define MCMD_BG_NOISE (1 << 4) +#define MCMD_SKIP_SHMINIT (1 << 5) /* only used for simulation */ +#define MCMD_SAMPLECOLL MCMD_SKIP_SHMINIT /* reuse for sample collect */ + +/*== macintstatus/macintmask ==*/ +/* gracefully suspended */ +#define MI_MACSSPNDD (1 << 0) +/* beacon template available */ +#define MI_BCNTPL (1 << 1) +/* TBTT indication */ +#define MI_TBTT (1 << 2) +/* beacon successfully tx'd */ +#define MI_BCNSUCCESS (1 << 3) +/* beacon canceled (IBSS) */ +#define MI_BCNCANCLD (1 << 4) +/* end of ATIM-window (IBSS) */ +#define MI_ATIMWINEND (1 << 5) +/* PMQ entries available */ +#define MI_PMQ (1 << 6) +/* non-specific gen-stat bits that are set by PSM */ +#define MI_NSPECGEN_0 (1 << 7) +/* non-specific gen-stat bits that are set by PSM */ +#define MI_NSPECGEN_1 (1 << 8) +/* MAC level Tx error */ +#define MI_MACTXERR (1 << 9) +/* non-specific gen-stat bits that are set by PSM */ +#define MI_NSPECGEN_3 (1 << 10) +/* PHY Tx error */ +#define MI_PHYTXERR (1 << 11) +/* Power Management Event */ +#define MI_PME (1 << 12) +/* General-purpose timer0 */ +#define MI_GP0 (1 << 13) +/* General-purpose timer1 */ +#define MI_GP1 (1 << 14) +/* (ORed) DMA-interrupts */ +#define MI_DMAINT (1 << 15) +/* MAC has completed a TX FIFO Suspend/Flush */ +#define MI_TXSTOP (1 << 16) +/* MAC has completed a CCA measurement */ +#define MI_CCA (1 << 17) +/* MAC has collected background noise samples */ +#define MI_BG_NOISE (1 << 18) +/* MBSS DTIM TBTT indication */ +#define MI_DTIM_TBTT (1 << 19) +/* Probe response queue needs attention */ +#define MI_PRQ (1 << 20) +/* Radio/PHY has been powered back up. */ +#define MI_PWRUP (1 << 21) +#define MI_RESERVED3 (1 << 22) +#define MI_RESERVED2 (1 << 23) +#define MI_RESERVED1 (1 << 25) +/* MAC detected change on RF Disable input*/ +#define MI_RFDISABLE (1 << 28) +/* MAC has completed a TX */ +#define MI_TFS (1 << 29) +/* A phy status change wrt G mode */ +#define MI_PHYCHANGED (1 << 30) +/* general purpose timeout */ +#define MI_TO (1U << 31) + +/* Mac capabilities registers */ +/*== machwcap ==*/ +#define MCAP_TKIPMIC 0x80000000 /* TKIP MIC hardware present */ + +/*== pmqhost data ==*/ +/* data entry of head pmq entry */ +#define PMQH_DATA_MASK 0xffff0000 +/* PM entry for BSS config */ +#define PMQH_BSSCFG 0x00100000 +/* PM Mode OFF: power save off */ +#define PMQH_PMOFF 0x00010000 +/* PM Mode ON: power save on */ +#define PMQH_PMON 0x00020000 +/* Dis-associated or De-authenticated */ +#define PMQH_DASAT 0x00040000 +/* ATIM not acknowledged */ +#define PMQH_ATIMFAIL 0x00080000 +/* delete head entry */ +#define PMQH_DEL_ENTRY 0x00000001 +/* delete head entry to cur read pointer -1 */ +#define PMQH_DEL_MULT 0x00000002 +/* pmq overflow indication */ +#define PMQH_OFLO 0x00000004 +/* entries are present in pmq */ +#define PMQH_NOT_EMPTY 0x00000008 + +/*== phydebug ==*/ +/* phy is asserting carrier sense */ +#define PDBG_CRS (1 << 0) +/* phy is taking xmit byte from mac this cycle */ +#define PDBG_TXA (1 << 1) +/* mac is instructing the phy to transmit a frame */ +#define PDBG_TXF (1 << 2) +/* phy is signalling a transmit Error to the mac */ +#define PDBG_TXE (1 << 3) +/* phy detected the end of a valid frame preamble */ +#define PDBG_RXF (1 << 4) +/* phy detected the end of a valid PLCP header */ +#define PDBG_RXS (1 << 5) +/* rx start not asserted */ +#define PDBG_RXFRG (1 << 6) +/* mac is taking receive byte from phy this cycle */ +#define PDBG_RXV (1 << 7) +/* RF portion of the radio is disabled */ +#define PDBG_RFD (1 << 16) + +/*== objaddr register ==*/ +#define OBJADDR_SEL_MASK 0x000F0000 +#define OBJADDR_UCM_SEL 0x00000000 +#define OBJADDR_SHM_SEL 0x00010000 +#define OBJADDR_SCR_SEL 0x00020000 +#define OBJADDR_IHR_SEL 0x00030000 +#define OBJADDR_RCMTA_SEL 0x00040000 +#define OBJADDR_SRCHM_SEL 0x00060000 +#define OBJADDR_WINC 0x01000000 +#define OBJADDR_RINC 0x02000000 +#define OBJADDR_AUTO_INC 0x03000000 + +#define WEP_PCMADDR 0x07d4 +#define WEP_PCMDATA 0x07d6 + +/*== frmtxstatus ==*/ +#define TXS_V (1 << 0) /* valid bit */ +#define TXS_STATUS_MASK 0xffff +#define TXS_FID_MASK 0xffff0000 +#define TXS_FID_SHIFT 16 + +/*== frmtxstatus2 ==*/ +#define TXS_SEQ_MASK 0xffff +#define TXS_PTX_MASK 0xff0000 +#define TXS_PTX_SHIFT 16 +#define TXS_MU_MASK 0x01000000 +#define TXS_MU_SHIFT 24 + +/*== clk_ctl_st ==*/ +#define CCS_ERSRC_REQ_D11PLL 0x00000100 /* d11 core pll request */ +#define CCS_ERSRC_REQ_PHYPLL 0x00000200 /* PHY pll request */ +#define CCS_ERSRC_AVAIL_D11PLL 0x01000000 /* d11 core pll available */ +#define CCS_ERSRC_AVAIL_PHYPLL 0x02000000 /* PHY pll available */ + +/* HT Cloclk Ctrl and Clock Avail for 4313 */ +#define CCS_ERSRC_REQ_HT 0x00000010 /* HT avail request */ +#define CCS_ERSRC_AVAIL_HT 0x00020000 /* HT clock available */ + +/* tsf_cfprep register */ +#define CFPREP_CBI_MASK 0xffffffc0 +#define CFPREP_CBI_SHIFT 6 +#define CFPREP_CFPP 0x00000001 + +/* tx fifo sizes values are in terms of 256 byte blocks */ +#define TXFIFOCMD_RESET_MASK (1 << 15) /* reset */ +#define TXFIFOCMD_FIFOSEL_SHIFT 8 /* fifo */ +#define TXFIFO_FIFOTOP_SHIFT 8 /* fifo start */ + +#define TXFIFO_START_BLK16 65 /* Base address + 32 * 512 B/P */ +#define TXFIFO_START_BLK 6 /* Base address + 6 * 256 B */ +#define TXFIFO_SIZE_UNIT 256 /* one unit corresponds to 256 bytes */ +#define MBSS16_TEMPLMEM_MINBLKS 65 /* one unit corresponds to 256 bytes */ + +/*== phy versions (PhyVersion:Revision field) ==*/ +/* analog block version */ +#define PV_AV_MASK 0xf000 +/* analog block version bitfield offset */ +#define PV_AV_SHIFT 12 +/* phy type */ +#define PV_PT_MASK 0x0f00 +/* phy type bitfield offset */ +#define PV_PT_SHIFT 8 +/* phy version */ +#define PV_PV_MASK 0x000f +#define PHY_TYPE(v) ((v & PV_PT_MASK) >> PV_PT_SHIFT) + +/*== phy types (PhyVersion:PhyType field) ==*/ +#define PHY_TYPE_N 4 /* N-Phy value */ +#define PHY_TYPE_SSN 6 /* SSLPN-Phy value */ +#define PHY_TYPE_LCN 8 /* LCN-Phy value */ +#define PHY_TYPE_LCNXN 9 /* LCNXN-Phy value */ +#define PHY_TYPE_NULL 0xf /* Invalid Phy value */ + +/*== analog types (PhyVersion:AnalogType field) ==*/ +#define ANA_11N_013 5 + +/* 802.11a PLCP header def */ +struct ofdm_phy_hdr { + u8 rlpt[3]; /* rate, length, parity, tail */ + u16 service; + u8 pad; +} __packed; + +#define D11A_PHY_HDR_GRATE(phdr) ((phdr)->rlpt[0] & 0x0f) +#define D11A_PHY_HDR_GRES(phdr) (((phdr)->rlpt[0] >> 4) & 0x01) +#define D11A_PHY_HDR_GLENGTH(phdr) (((u32 *)((phdr)->rlpt) >> 5) & 0x0fff) +#define D11A_PHY_HDR_GPARITY(phdr) (((phdr)->rlpt[3] >> 1) & 0x01) +#define D11A_PHY_HDR_GTAIL(phdr) (((phdr)->rlpt[3] >> 2) & 0x3f) + +/* rate encoded per 802.11a-1999 sec 17.3.4.1 */ +#define D11A_PHY_HDR_SRATE(phdr, rate) \ + ((phdr)->rlpt[0] = ((phdr)->rlpt[0] & 0xf0) | ((rate) & 0xf)) +/* set reserved field to zero */ +#define D11A_PHY_HDR_SRES(phdr) ((phdr)->rlpt[0] &= 0xef) +/* length is number of octets in PSDU */ +#define D11A_PHY_HDR_SLENGTH(phdr, length) \ + (*(u32 *)((phdr)->rlpt) = *(u32 *)((phdr)->rlpt) | \ + (((length) & 0x0fff) << 5)) +/* set the tail to all zeros */ +#define D11A_PHY_HDR_STAIL(phdr) ((phdr)->rlpt[3] &= 0x03) + +#define D11A_PHY_HDR_LEN_L 3 /* low-rate part of PLCP header */ +#define D11A_PHY_HDR_LEN_R 2 /* high-rate part of PLCP header */ + +#define D11A_PHY_TX_DELAY (2) /* 2.1 usec */ + +#define D11A_PHY_HDR_TIME (4) /* low-rate part of PLCP header */ +#define D11A_PHY_PRE_TIME (16) +#define D11A_PHY_PREHDR_TIME (D11A_PHY_PRE_TIME + D11A_PHY_HDR_TIME) + +/* 802.11b PLCP header def */ +struct cck_phy_hdr { + u8 signal; + u8 service; + u16 length; + u16 crc; +} __packed; + +#define D11B_PHY_HDR_LEN 6 + +#define D11B_PHY_TX_DELAY (3) /* 3.4 usec */ + +#define D11B_PHY_LHDR_TIME (D11B_PHY_HDR_LEN << 3) +#define D11B_PHY_LPRE_TIME (144) +#define D11B_PHY_LPREHDR_TIME (D11B_PHY_LPRE_TIME + D11B_PHY_LHDR_TIME) + +#define D11B_PHY_SHDR_TIME (D11B_PHY_LHDR_TIME >> 1) +#define D11B_PHY_SPRE_TIME (D11B_PHY_LPRE_TIME >> 1) +#define D11B_PHY_SPREHDR_TIME (D11B_PHY_SPRE_TIME + D11B_PHY_SHDR_TIME) + +#define D11B_PLCP_SIGNAL_LOCKED (1 << 2) +#define D11B_PLCP_SIGNAL_LE (1 << 7) + +#define MIMO_PLCP_MCS_MASK 0x7f /* mcs index */ +#define MIMO_PLCP_40MHZ 0x80 /* 40 Hz frame */ +#define MIMO_PLCP_AMPDU 0x08 /* ampdu */ + +#define BRCMS_GET_CCK_PLCP_LEN(plcp) (plcp[4] + (plcp[5] << 8)) +#define BRCMS_GET_MIMO_PLCP_LEN(plcp) (plcp[1] + (plcp[2] << 8)) +#define BRCMS_SET_MIMO_PLCP_LEN(plcp, len) \ + do { \ + plcp[1] = len & 0xff; \ + plcp[2] = ((len >> 8) & 0xff); \ + } while (0) + +#define BRCMS_SET_MIMO_PLCP_AMPDU(plcp) (plcp[3] |= MIMO_PLCP_AMPDU) +#define BRCMS_CLR_MIMO_PLCP_AMPDU(plcp) (plcp[3] &= ~MIMO_PLCP_AMPDU) +#define BRCMS_IS_MIMO_PLCP_AMPDU(plcp) (plcp[3] & MIMO_PLCP_AMPDU) + +/* + * The dot11a PLCP header is 5 bytes. To simplify the software (so that we + * don't need e.g. different tx DMA headers for 11a and 11b), the PLCP header + * has padding added in the ucode. + */ +#define D11_PHY_HDR_LEN 6 + +/* TX DMA buffer header */ +struct d11txh { + __le16 MacTxControlLow; /* 0x0 */ + __le16 MacTxControlHigh; /* 0x1 */ + __le16 MacFrameControl; /* 0x2 */ + __le16 TxFesTimeNormal; /* 0x3 */ + __le16 PhyTxControlWord; /* 0x4 */ + __le16 PhyTxControlWord_1; /* 0x5 */ + __le16 PhyTxControlWord_1_Fbr; /* 0x6 */ + __le16 PhyTxControlWord_1_Rts; /* 0x7 */ + __le16 PhyTxControlWord_1_FbrRts; /* 0x8 */ + __le16 MainRates; /* 0x9 */ + __le16 XtraFrameTypes; /* 0xa */ + u8 IV[16]; /* 0x0b - 0x12 */ + u8 TxFrameRA[6]; /* 0x13 - 0x15 */ + __le16 TxFesTimeFallback; /* 0x16 */ + u8 RTSPLCPFallback[6]; /* 0x17 - 0x19 */ + __le16 RTSDurFallback; /* 0x1a */ + u8 FragPLCPFallback[6]; /* 0x1b - 1d */ + __le16 FragDurFallback; /* 0x1e */ + __le16 MModeLen; /* 0x1f */ + __le16 MModeFbrLen; /* 0x20 */ + __le16 TstampLow; /* 0x21 */ + __le16 TstampHigh; /* 0x22 */ + __le16 ABI_MimoAntSel; /* 0x23 */ + __le16 PreloadSize; /* 0x24 */ + __le16 AmpduSeqCtl; /* 0x25 */ + __le16 TxFrameID; /* 0x26 */ + __le16 TxStatus; /* 0x27 */ + __le16 MaxNMpdus; /* 0x28 */ + __le16 MaxABytes_MRT; /* 0x29 */ + __le16 MaxABytes_FBR; /* 0x2a */ + __le16 MinMBytes; /* 0x2b */ + u8 RTSPhyHeader[D11_PHY_HDR_LEN]; /* 0x2c - 0x2e */ + struct ieee80211_rts rts_frame; /* 0x2f - 0x36 */ + u16 PAD; /* 0x37 */ +} __packed; + +#define D11_TXH_LEN 112 /* bytes */ + +/* Frame Types */ +#define FT_CCK 0 +#define FT_OFDM 1 +#define FT_HT 2 +#define FT_N 3 + +/* + * Position of MPDU inside A-MPDU; indicated with bits 10:9 + * of MacTxControlLow + */ +#define TXC_AMPDU_SHIFT 9 /* shift for ampdu settings */ +#define TXC_AMPDU_NONE 0 /* Regular MPDU, not an A-MPDU */ +#define TXC_AMPDU_FIRST 1 /* first MPDU of an A-MPDU */ +#define TXC_AMPDU_MIDDLE 2 /* intermediate MPDU of an A-MPDU */ +#define TXC_AMPDU_LAST 3 /* last (or single) MPDU of an A-MPDU */ + +/*== MacTxControlLow ==*/ +#define TXC_AMIC 0x8000 +#define TXC_SENDCTS 0x0800 +#define TXC_AMPDU_MASK 0x0600 +#define TXC_BW_40 0x0100 +#define TXC_FREQBAND_5G 0x0080 +#define TXC_DFCS 0x0040 +#define TXC_IGNOREPMQ 0x0020 +#define TXC_HWSEQ 0x0010 +#define TXC_STARTMSDU 0x0008 +#define TXC_SENDRTS 0x0004 +#define TXC_LONGFRAME 0x0002 +#define TXC_IMMEDACK 0x0001 + +/*== MacTxControlHigh ==*/ +/* RTS fallback preamble type 1 = SHORT 0 = LONG */ +#define TXC_PREAMBLE_RTS_FB_SHORT 0x8000 +/* RTS main rate preamble type 1 = SHORT 0 = LONG */ +#define TXC_PREAMBLE_RTS_MAIN_SHORT 0x4000 +/* + * Main fallback rate preamble type + * 1 = SHORT for OFDM/GF for MIMO + * 0 = LONG for CCK/MM for MIMO + */ +#define TXC_PREAMBLE_DATA_FB_SHORT 0x2000 + +/* TXC_PREAMBLE_DATA_MAIN is in PhyTxControl bit 5 */ +/* use fallback rate for this AMPDU */ +#define TXC_AMPDU_FBR 0x1000 +#define TXC_SECKEY_MASK 0x0FF0 +#define TXC_SECKEY_SHIFT 4 +/* Use alternate txpwr defined at loc. M_ALT_TXPWR_IDX */ +#define TXC_ALT_TXPWR 0x0008 +#define TXC_SECTYPE_MASK 0x0007 +#define TXC_SECTYPE_SHIFT 0 + +/* Null delimiter for Fallback rate */ +#define AMPDU_FBR_NULL_DELIM 5 /* Location of Null delimiter count for AMPDU */ + +/* PhyTxControl for Mimophy */ +#define PHY_TXC_PWR_MASK 0xFC00 +#define PHY_TXC_PWR_SHIFT 10 +#define PHY_TXC_ANT_MASK 0x03C0 /* bit 6, 7, 8, 9 */ +#define PHY_TXC_ANT_SHIFT 6 +#define PHY_TXC_ANT_0_1 0x00C0 /* auto, last rx */ +#define PHY_TXC_LCNPHY_ANT_LAST 0x0000 +#define PHY_TXC_ANT_3 0x0200 /* virtual antenna 3 */ +#define PHY_TXC_ANT_2 0x0100 /* virtual antenna 2 */ +#define PHY_TXC_ANT_1 0x0080 /* virtual antenna 1 */ +#define PHY_TXC_ANT_0 0x0040 /* virtual antenna 0 */ +#define PHY_TXC_SHORT_HDR 0x0010 + +#define PHY_TXC_OLD_ANT_0 0x0000 +#define PHY_TXC_OLD_ANT_1 0x0100 +#define PHY_TXC_OLD_ANT_LAST 0x0300 + +/* PhyTxControl_1 for Mimophy */ +#define PHY_TXC1_BW_MASK 0x0007 +#define PHY_TXC1_BW_10MHZ 0 +#define PHY_TXC1_BW_10MHZ_UP 1 +#define PHY_TXC1_BW_20MHZ 2 +#define PHY_TXC1_BW_20MHZ_UP 3 +#define PHY_TXC1_BW_40MHZ 4 +#define PHY_TXC1_BW_40MHZ_DUP 5 +#define PHY_TXC1_MODE_SHIFT 3 +#define PHY_TXC1_MODE_MASK 0x0038 +#define PHY_TXC1_MODE_SISO 0 +#define PHY_TXC1_MODE_CDD 1 +#define PHY_TXC1_MODE_STBC 2 +#define PHY_TXC1_MODE_SDM 3 + +/* PhyTxControl for HTphy that are different from Mimophy */ +#define PHY_TXC_HTANT_MASK 0x3fC0 /* bits 6-13 */ + +/* XtraFrameTypes */ +#define XFTS_RTS_FT_SHIFT 2 +#define XFTS_FBRRTS_FT_SHIFT 4 +#define XFTS_CHANNEL_SHIFT 8 + +/* Antenna diversity bit in ant_wr_settle */ +#define PHY_AWS_ANTDIV 0x2000 + +/* IFS ctl */ +#define IFS_USEEDCF (1 << 2) + +/* IFS ctl1 */ +#define IFS_CTL1_EDCRS (1 << 3) +#define IFS_CTL1_EDCRS_20L (1 << 4) +#define IFS_CTL1_EDCRS_40 (1 << 5) + +/* ABI_MimoAntSel */ +#define ABI_MAS_ADDR_BMP_IDX_MASK 0x0f00 +#define ABI_MAS_ADDR_BMP_IDX_SHIFT 8 +#define ABI_MAS_FBR_ANT_PTN_MASK 0x00f0 +#define ABI_MAS_FBR_ANT_PTN_SHIFT 4 +#define ABI_MAS_MRT_ANT_PTN_MASK 0x000f + +/* tx status packet */ +struct tx_status { + u16 framelen; + u16 PAD; + u16 frameid; + u16 status; + u16 lasttxtime; + u16 sequence; + u16 phyerr; + u16 ackphyrxsh; +} __packed; + +#define TXSTATUS_LEN 16 + +/* status field bit definitions */ +#define TX_STATUS_FRM_RTX_MASK 0xF000 +#define TX_STATUS_FRM_RTX_SHIFT 12 +#define TX_STATUS_RTS_RTX_MASK 0x0F00 +#define TX_STATUS_RTS_RTX_SHIFT 8 +#define TX_STATUS_MASK 0x00FE +#define TX_STATUS_PMINDCTD (1 << 7) /* PM mode indicated to AP */ +#define TX_STATUS_INTERMEDIATE (1 << 6) /* intermediate or 1st ampdu pkg */ +#define TX_STATUS_AMPDU (1 << 5) /* AMPDU status */ +#define TX_STATUS_SUPR_MASK 0x1C /* suppress status bits (4:2) */ +#define TX_STATUS_SUPR_SHIFT 2 +#define TX_STATUS_ACK_RCV (1 << 1) /* ACK received */ +#define TX_STATUS_VALID (1 << 0) /* Tx status valid */ +#define TX_STATUS_NO_ACK 0 + +/* suppress status reason codes */ +#define TX_STATUS_SUPR_PMQ (1 << 2) /* PMQ entry */ +#define TX_STATUS_SUPR_FLUSH (2 << 2) /* flush request */ +#define TX_STATUS_SUPR_FRAG (3 << 2) /* previous frag failure */ +#define TX_STATUS_SUPR_TBTT (3 << 2) /* SHARED: Probe resp supr for TBTT */ +#define TX_STATUS_SUPR_BADCH (4 << 2) /* channel mismatch */ +#define TX_STATUS_SUPR_EXPTIME (5 << 2) /* lifetime expiry */ +#define TX_STATUS_SUPR_UF (6 << 2) /* underflow */ + +/* Unexpected tx status for rate update */ +#define TX_STATUS_UNEXP(status) \ + ((((status) & TX_STATUS_INTERMEDIATE) != 0) && \ + TX_STATUS_UNEXP_AMPDU(status)) + +/* Unexpected tx status for A-MPDU rate update */ +#define TX_STATUS_UNEXP_AMPDU(status) \ + ((((status) & TX_STATUS_SUPR_MASK) != 0) && \ + (((status) & TX_STATUS_SUPR_MASK) != TX_STATUS_SUPR_EXPTIME)) + +#define TX_STATUS_BA_BMAP03_MASK 0xF000 /* ba bitmap 0:3 in 1st pkg */ +#define TX_STATUS_BA_BMAP03_SHIFT 12 /* ba bitmap 0:3 in 1st pkg */ +#define TX_STATUS_BA_BMAP47_MASK 0x001E /* ba bitmap 4:7 in 2nd pkg */ +#define TX_STATUS_BA_BMAP47_SHIFT 3 /* ba bitmap 4:7 in 2nd pkg */ + +/* RXE (Receive Engine) */ + +/* RCM_CTL */ +#define RCM_INC_MASK_H 0x0080 +#define RCM_INC_MASK_L 0x0040 +#define RCM_INC_DATA 0x0020 +#define RCM_INDEX_MASK 0x001F +#define RCM_SIZE 15 + +#define RCM_MAC_OFFSET 0 /* current MAC address */ +#define RCM_BSSID_OFFSET 3 /* current BSSID address */ +#define RCM_F_BSSID_0_OFFSET 6 /* foreign BSS CFP tracking */ +#define RCM_F_BSSID_1_OFFSET 9 /* foreign BSS CFP tracking */ +#define RCM_F_BSSID_2_OFFSET 12 /* foreign BSS CFP tracking */ + +#define RCM_WEP_TA0_OFFSET 16 +#define RCM_WEP_TA1_OFFSET 19 +#define RCM_WEP_TA2_OFFSET 22 +#define RCM_WEP_TA3_OFFSET 25 + +/* PSM Block */ + +/* psm_phy_hdr_param bits */ +#define MAC_PHY_RESET 1 +#define MAC_PHY_CLOCK_EN 2 +#define MAC_PHY_FORCE_CLK 4 + +/* WEP Block */ + +/* WEP_WKEY */ +#define WKEY_START (1 << 8) +#define WKEY_SEL_MASK 0x1F + +/* WEP data formats */ + +/* the number of RCMTA entries */ +#define RCMTA_SIZE 50 + +#define M_ADDR_BMP_BLK (0x37e * 2) +#define M_ADDR_BMP_BLK_SZ 12 + +#define ADDR_BMP_RA (1 << 0) /* Receiver Address (RA) */ +#define ADDR_BMP_TA (1 << 1) /* Transmitter Address (TA) */ +#define ADDR_BMP_BSSID (1 << 2) /* BSSID */ +#define ADDR_BMP_AP (1 << 3) /* Infra-BSS Access Point */ +#define ADDR_BMP_STA (1 << 4) /* Infra-BSS Station */ +#define ADDR_BMP_RESERVED1 (1 << 5) +#define ADDR_BMP_RESERVED2 (1 << 6) +#define ADDR_BMP_RESERVED3 (1 << 7) +#define ADDR_BMP_BSS_IDX_MASK (3 << 8) /* BSS control block index */ +#define ADDR_BMP_BSS_IDX_SHIFT 8 + +#define WSEC_MAX_RCMTA_KEYS 54 + +/* max keys in M_TKMICKEYS_BLK */ +#define WSEC_MAX_TKMIC_ENGINE_KEYS 12 /* 8 + 4 default */ + +/* max RXE match registers */ +#define WSEC_MAX_RXE_KEYS 4 + +/* SECKINDXALGO (Security Key Index & Algorithm Block) word format */ +/* SKL (Security Key Lookup) */ +#define SKL_ALGO_MASK 0x0007 +#define SKL_ALGO_SHIFT 0 +#define SKL_KEYID_MASK 0x0008 +#define SKL_KEYID_SHIFT 3 +#define SKL_INDEX_MASK 0x03F0 +#define SKL_INDEX_SHIFT 4 +#define SKL_GRP_ALGO_MASK 0x1c00 +#define SKL_GRP_ALGO_SHIFT 10 + +/* additional bits defined for IBSS group key support */ +#define SKL_IBSS_INDEX_MASK 0x01F0 +#define SKL_IBSS_INDEX_SHIFT 4 +#define SKL_IBSS_KEYID1_MASK 0x0600 +#define SKL_IBSS_KEYID1_SHIFT 9 +#define SKL_IBSS_KEYID2_MASK 0x1800 +#define SKL_IBSS_KEYID2_SHIFT 11 +#define SKL_IBSS_KEYALGO_MASK 0xE000 +#define SKL_IBSS_KEYALGO_SHIFT 13 + +#define WSEC_MODE_OFF 0 +#define WSEC_MODE_HW 1 +#define WSEC_MODE_SW 2 + +#define WSEC_ALGO_OFF 0 +#define WSEC_ALGO_WEP1 1 +#define WSEC_ALGO_TKIP 2 +#define WSEC_ALGO_AES 3 +#define WSEC_ALGO_WEP128 4 +#define WSEC_ALGO_AES_LEGACY 5 +#define WSEC_ALGO_NALG 6 + +#define AES_MODE_NONE 0 +#define AES_MODE_CCM 1 + +/* WEP_CTL (Rev 0) */ +#define WECR0_KEYREG_SHIFT 0 +#define WECR0_KEYREG_MASK 0x7 +#define WECR0_DECRYPT (1 << 3) +#define WECR0_IVINLINE (1 << 4) +#define WECR0_WEPALG_SHIFT 5 +#define WECR0_WEPALG_MASK (0x7 << 5) +#define WECR0_WKEYSEL_SHIFT 8 +#define WECR0_WKEYSEL_MASK (0x7 << 8) +#define WECR0_WKEYSTART (1 << 11) +#define WECR0_WEPINIT (1 << 14) +#define WECR0_ICVERR (1 << 15) + +/* Frame template map byte offsets */ +#define T_ACTS_TPL_BASE (0) +#define T_NULL_TPL_BASE (0xc * 2) +#define T_QNULL_TPL_BASE (0x1c * 2) +#define T_RR_TPL_BASE (0x2c * 2) +#define T_BCN0_TPL_BASE (0x34 * 2) +#define T_PRS_TPL_BASE (0x134 * 2) +#define T_BCN1_TPL_BASE (0x234 * 2) +#define T_TX_FIFO_TXRAM_BASE (T_ACTS_TPL_BASE + \ + (TXFIFO_START_BLK * TXFIFO_SIZE_UNIT)) + +#define T_BA_TPL_BASE T_QNULL_TPL_BASE /* template area for BA */ + +#define T_RAM_ACCESS_SZ 4 /* template ram is 4 byte access only */ + +/* Shared Mem byte offsets */ + +/* Location where the ucode expects the corerev */ +#define M_MACHW_VER (0x00b * 2) + +/* Location where the ucode expects the MAC capabilities */ +#define M_MACHW_CAP_L (0x060 * 2) +#define M_MACHW_CAP_H (0x061 * 2) + +/* WME shared memory */ +#define M_EDCF_STATUS_OFF (0x007 * 2) +#define M_TXF_CUR_INDEX (0x018 * 2) +#define M_EDCF_QINFO (0x120 * 2) + +/* PS-mode related parameters */ +#define M_DOT11_SLOT (0x008 * 2) +#define M_DOT11_DTIMPERIOD (0x009 * 2) +#define M_NOSLPZNATDTIM (0x026 * 2) + +/* Beacon-related parameters */ +#define M_BCN0_FRM_BYTESZ (0x00c * 2) /* Bcn 0 template length */ +#define M_BCN1_FRM_BYTESZ (0x00d * 2) /* Bcn 1 template length */ +#define M_BCN_TXTSF_OFFSET (0x00e * 2) +#define M_TIMBPOS_INBEACON (0x00f * 2) +#define M_SFRMTXCNTFBRTHSD (0x022 * 2) +#define M_LFRMTXCNTFBRTHSD (0x023 * 2) +#define M_BCN_PCTLWD (0x02a * 2) +#define M_BCN_LI (0x05b * 2) /* beacon listen interval */ + +/* MAX Rx Frame len */ +#define M_MAXRXFRM_LEN (0x010 * 2) + +/* ACK/CTS related params */ +#define M_RSP_PCTLWD (0x011 * 2) + +/* Hardware Power Control */ +#define M_TXPWR_N (0x012 * 2) +#define M_TXPWR_TARGET (0x013 * 2) +#define M_TXPWR_MAX (0x014 * 2) +#define M_TXPWR_CUR (0x019 * 2) + +/* Rx-related parameters */ +#define M_RX_PAD_DATA_OFFSET (0x01a * 2) + +/* WEP Shared mem data */ +#define M_SEC_DEFIVLOC (0x01e * 2) +#define M_SEC_VALNUMSOFTMCHTA (0x01f * 2) +#define M_PHYVER (0x028 * 2) +#define M_PHYTYPE (0x029 * 2) +#define M_SECRXKEYS_PTR (0x02b * 2) +#define M_TKMICKEYS_PTR (0x059 * 2) +#define M_SECKINDXALGO_BLK (0x2ea * 2) +#define M_SECKINDXALGO_BLK_SZ 54 +#define M_SECPSMRXTAMCH_BLK (0x2fa * 2) +#define M_TKIP_TSC_TTAK (0x18c * 2) +#define D11_MAX_KEY_SIZE 16 + +#define M_MAX_ANTCNT (0x02e * 2) /* antenna swap threshold */ + +/* Probe response related parameters */ +#define M_SSIDLEN (0x024 * 2) +#define M_PRB_RESP_FRM_LEN (0x025 * 2) +#define M_PRS_MAXTIME (0x03a * 2) +#define M_SSID (0xb0 * 2) +#define M_CTXPRS_BLK (0xc0 * 2) +#define C_CTX_PCTLWD_POS (0x4 * 2) + +/* Delta between OFDM and CCK power in CCK power boost mode */ +#define M_OFDM_OFFSET (0x027 * 2) + +/* TSSI for last 4 11b/g CCK packets transmitted */ +#define M_B_TSSI_0 (0x02c * 2) +#define M_B_TSSI_1 (0x02d * 2) + +/* Host flags to turn on ucode options */ +#define M_HOST_FLAGS1 (0x02f * 2) +#define M_HOST_FLAGS2 (0x030 * 2) +#define M_HOST_FLAGS3 (0x031 * 2) +#define M_HOST_FLAGS4 (0x03c * 2) +#define M_HOST_FLAGS5 (0x06a * 2) +#define M_HOST_FLAGS_SZ 16 + +#define M_RADAR_REG (0x033 * 2) + +/* TSSI for last 4 11a OFDM packets transmitted */ +#define M_A_TSSI_0 (0x034 * 2) +#define M_A_TSSI_1 (0x035 * 2) + +/* noise interference measurement */ +#define M_NOISE_IF_COUNT (0x034 * 2) +#define M_NOISE_IF_TIMEOUT (0x035 * 2) + +#define M_RF_RX_SP_REG1 (0x036 * 2) + +/* TSSI for last 4 11g OFDM packets transmitted */ +#define M_G_TSSI_0 (0x038 * 2) +#define M_G_TSSI_1 (0x039 * 2) + +/* Background noise measure */ +#define M_JSSI_0 (0x44 * 2) +#define M_JSSI_1 (0x45 * 2) +#define M_JSSI_AUX (0x46 * 2) + +#define M_CUR_2050_RADIOCODE (0x47 * 2) + +/* TX fifo sizes */ +#define M_FIFOSIZE0 (0x4c * 2) +#define M_FIFOSIZE1 (0x4d * 2) +#define M_FIFOSIZE2 (0x4e * 2) +#define M_FIFOSIZE3 (0x4f * 2) +#define D11_MAX_TX_FRMS 32 /* max frames allowed in tx fifo */ + +/* Current channel number plus upper bits */ +#define M_CURCHANNEL (0x50 * 2) +#define D11_CURCHANNEL_5G 0x0100; +#define D11_CURCHANNEL_40 0x0200; +#define D11_CURCHANNEL_MAX 0x00FF; + +/* last posted frameid on the bcmc fifo */ +#define M_BCMC_FID (0x54 * 2) +#define INVALIDFID 0xffff + +/* extended beacon phyctl bytes for 11N */ +#define M_BCN_PCTL1WD (0x058 * 2) + +/* idle busy ratio to duty_cycle requirement */ +#define M_TX_IDLE_BUSY_RATIO_X_16_CCK (0x52 * 2) +#define M_TX_IDLE_BUSY_RATIO_X_16_OFDM (0x5A * 2) + +/* CW RSSI for LCNPHY */ +#define M_LCN_RSSI_0 0x1332 +#define M_LCN_RSSI_1 0x1338 +#define M_LCN_RSSI_2 0x133e +#define M_LCN_RSSI_3 0x1344 + +/* SNR for LCNPHY */ +#define M_LCN_SNR_A_0 0x1334 +#define M_LCN_SNR_B_0 0x1336 + +#define M_LCN_SNR_A_1 0x133a +#define M_LCN_SNR_B_1 0x133c + +#define M_LCN_SNR_A_2 0x1340 +#define M_LCN_SNR_B_2 0x1342 + +#define M_LCN_SNR_A_3 0x1346 +#define M_LCN_SNR_B_3 0x1348 + +#define M_LCN_LAST_RESET (81*2) +#define M_LCN_LAST_LOC (63*2) +#define M_LCNPHY_RESET_STATUS (4902) +#define M_LCNPHY_DSC_TIME (0x98d*2) +#define M_LCNPHY_RESET_CNT_DSC (0x98b*2) +#define M_LCNPHY_RESET_CNT (0x98c*2) + +/* Rate table offsets */ +#define M_RT_DIRMAP_A (0xe0 * 2) +#define M_RT_BBRSMAP_A (0xf0 * 2) +#define M_RT_DIRMAP_B (0x100 * 2) +#define M_RT_BBRSMAP_B (0x110 * 2) + +/* Rate table entry offsets */ +#define M_RT_PRS_PLCP_POS 10 +#define M_RT_PRS_DUR_POS 16 +#define M_RT_OFDM_PCTL1_POS 18 + +#define M_20IN40_IQ (0x380 * 2) + +/* SHM locations where ucode stores the current power index */ +#define M_CURR_IDX1 (0x384 * 2) +#define M_CURR_IDX2 (0x387 * 2) + +#define M_BSCALE_ANT0 (0x5e * 2) +#define M_BSCALE_ANT1 (0x5f * 2) + +/* Antenna Diversity Testing */ +#define M_MIMO_ANTSEL_RXDFLT (0x63 * 2) +#define M_ANTSEL_CLKDIV (0x61 * 2) +#define M_MIMO_ANTSEL_TXDFLT (0x64 * 2) + +#define M_MIMO_MAXSYM (0x5d * 2) +#define MIMO_MAXSYM_DEF 0x8000 /* 32k */ +#define MIMO_MAXSYM_MAX 0xffff /* 64k */ + +#define M_WATCHDOG_8TU (0x1e * 2) +#define WATCHDOG_8TU_DEF 5 +#define WATCHDOG_8TU_MAX 10 + +/* Manufacturing Test Variables */ +/* PER test mode */ +#define M_PKTENG_CTRL (0x6c * 2) +/* IFS for TX mode */ +#define M_PKTENG_IFS (0x6d * 2) +/* Lower word of tx frmcnt/rx lostcnt */ +#define M_PKTENG_FRMCNT_LO (0x6e * 2) +/* Upper word of tx frmcnt/rx lostcnt */ +#define M_PKTENG_FRMCNT_HI (0x6f * 2) + +/* Index variation in vbat ripple */ +#define M_LCN_PWR_IDX_MAX (0x67 * 2) /* highest index read by ucode */ +#define M_LCN_PWR_IDX_MIN (0x66 * 2) /* lowest index read by ucode */ + +/* M_PKTENG_CTRL bit definitions */ +#define M_PKTENG_MODE_TX 0x0001 +#define M_PKTENG_MODE_TX_RIFS 0x0004 +#define M_PKTENG_MODE_TX_CTS 0x0008 +#define M_PKTENG_MODE_RX 0x0002 +#define M_PKTENG_MODE_RX_WITH_ACK 0x0402 +#define M_PKTENG_MODE_MASK 0x0003 +/* TX frames indicated in the frmcnt reg */ +#define M_PKTENG_FRMCNT_VLD 0x0100 + +/* Sample Collect parameters (bitmap and type) */ +/* Trigger bitmap for sample collect */ +#define M_SMPL_COL_BMP (0x37d * 2) +/* Sample collect type */ +#define M_SMPL_COL_CTL (0x3b2 * 2) + +#define ANTSEL_CLKDIV_4MHZ 6 +#define MIMO_ANTSEL_BUSY 0x4000 /* bit 14 (busy) */ +#define MIMO_ANTSEL_SEL 0x8000 /* bit 15 write the value */ +#define MIMO_ANTSEL_WAIT 50 /* 50us wait */ +#define MIMO_ANTSEL_OVERRIDE 0x8000 /* flag */ + +struct shm_acparams { + u16 txop; + u16 cwmin; + u16 cwmax; + u16 cwcur; + u16 aifs; + u16 bslots; + u16 reggap; + u16 status; + u16 rsvd[8]; +} __packed; +#define M_EDCF_QLEN (16 * 2) + +#define WME_STATUS_NEWAC (1 << 8) + +/* M_HOST_FLAGS */ +#define MHFMAX 5 /* Number of valid hostflag half-word (u16) */ +#define MHF1 0 /* Hostflag 1 index */ +#define MHF2 1 /* Hostflag 2 index */ +#define MHF3 2 /* Hostflag 3 index */ +#define MHF4 3 /* Hostflag 4 index */ +#define MHF5 4 /* Hostflag 5 index */ + +/* Flags in M_HOST_FLAGS */ +/* Enable ucode antenna diversity help */ +#define MHF1_ANTDIV 0x0001 +/* Enable EDCF access control */ +#define MHF1_EDCF 0x0100 +#define MHF1_IQSWAP_WAR 0x0200 +/* Disable Slow clock request, for corerev < 11 */ +#define MHF1_FORCEFASTCLK 0x0400 + +/* Flags in M_HOST_FLAGS2 */ + +/* Flush BCMC FIFO immediately */ +#define MHF2_TXBCMC_NOW 0x0040 +/* Enable ucode/hw power control */ +#define MHF2_HWPWRCTL 0x0080 +#define MHF2_NPHY40MHZ_WAR 0x0800 + +/* Flags in M_HOST_FLAGS3 */ +/* enabled mimo antenna selection */ +#define MHF3_ANTSEL_EN 0x0001 +/* antenna selection mode: 0: 2x3, 1: 2x4 */ +#define MHF3_ANTSEL_MODE 0x0002 +#define MHF3_RESERVED1 0x0004 +#define MHF3_RESERVED2 0x0008 +#define MHF3_NPHY_MLADV_WAR 0x0010 + +/* Flags in M_HOST_FLAGS4 */ +/* force bphy Tx on core 0 (board level WAR) */ +#define MHF4_BPHY_TXCORE0 0x0080 +/* for 4313A0 FEM boards */ +#define MHF4_EXTPA_ENABLE 0x4000 + +/* Flags in M_HOST_FLAGS5 */ +#define MHF5_4313_GPIOCTRL 0x0001 +#define MHF5_RESERVED1 0x0002 +#define MHF5_RESERVED2 0x0004 +/* Radio power setting for ucode */ +#define M_RADIO_PWR (0x32 * 2) + +/* phy noise recorded by ucode right after tx */ +#define M_PHY_NOISE (0x037 * 2) +#define PHY_NOISE_MASK 0x00ff + +/* + * Receive Frame Data Header for 802.11b DCF-only frames + * + * RxFrameSize: Actual byte length of the frame data received + * PAD: padding (not used) + * PhyRxStatus_0: PhyRxStatus 15:0 + * PhyRxStatus_1: PhyRxStatus 31:16 + * PhyRxStatus_2: PhyRxStatus 47:32 + * PhyRxStatus_3: PhyRxStatus 63:48 + * PhyRxStatus_4: PhyRxStatus 79:64 + * PhyRxStatus_5: PhyRxStatus 95:80 + * RxStatus1: MAC Rx Status + * RxStatus2: extended MAC Rx status + * RxTSFTime: RxTSFTime time of first MAC symbol + M_PHY_PLCPRX_DLY + * RxChan: gain code, channel radio code, and phy type + */ +struct d11rxhdr_le { + __le16 RxFrameSize; + u16 PAD; + __le16 PhyRxStatus_0; + __le16 PhyRxStatus_1; + __le16 PhyRxStatus_2; + __le16 PhyRxStatus_3; + __le16 PhyRxStatus_4; + __le16 PhyRxStatus_5; + __le16 RxStatus1; + __le16 RxStatus2; + __le16 RxTSFTime; + __le16 RxChan; +} __packed; + +struct d11rxhdr { + u16 RxFrameSize; + u16 PAD; + u16 PhyRxStatus_0; + u16 PhyRxStatus_1; + u16 PhyRxStatus_2; + u16 PhyRxStatus_3; + u16 PhyRxStatus_4; + u16 PhyRxStatus_5; + u16 RxStatus1; + u16 RxStatus2; + u16 RxTSFTime; + u16 RxChan; +} __packed; + +/* PhyRxStatus_0: */ +/* NPHY only: CCK, OFDM, preN, N */ +#define PRXS0_FT_MASK 0x0003 +/* NPHY only: clip count adjustment steps by AGC */ +#define PRXS0_CLIP_MASK 0x000C +#define PRXS0_CLIP_SHIFT 2 +/* PHY received a frame with unsupported rate */ +#define PRXS0_UNSRATE 0x0010 +/* GPHY: rx ant, NPHY: upper sideband */ +#define PRXS0_RXANT_UPSUBBAND 0x0020 +/* CCK frame only: lost crs during cck frame reception */ +#define PRXS0_LCRS 0x0040 +/* Short Preamble */ +#define PRXS0_SHORTH 0x0080 +/* PLCP violation */ +#define PRXS0_PLCPFV 0x0100 +/* PLCP header integrity check failed */ +#define PRXS0_PLCPHCF 0x0200 +/* legacy PHY gain control */ +#define PRXS0_GAIN_CTL 0x4000 +/* NPHY: Antennas used for received frame, bitmask */ +#define PRXS0_ANTSEL_MASK 0xF000 +#define PRXS0_ANTSEL_SHIFT 0x12 + +/* subfield PRXS0_FT_MASK */ +#define PRXS0_CCK 0x0000 +/* valid only for G phy, use rxh->RxChan for A phy */ +#define PRXS0_OFDM 0x0001 +#define PRXS0_PREN 0x0002 +#define PRXS0_STDN 0x0003 + +/* subfield PRXS0_ANTSEL_MASK */ +#define PRXS0_ANTSEL_0 0x0 /* antenna 0 is used */ +#define PRXS0_ANTSEL_1 0x2 /* antenna 1 is used */ +#define PRXS0_ANTSEL_2 0x4 /* antenna 2 is used */ +#define PRXS0_ANTSEL_3 0x8 /* antenna 3 is used */ + +/* PhyRxStatus_1: */ +#define PRXS1_JSSI_MASK 0x00FF +#define PRXS1_JSSI_SHIFT 0 +#define PRXS1_SQ_MASK 0xFF00 +#define PRXS1_SQ_SHIFT 8 + +/* nphy PhyRxStatus_1: */ +#define PRXS1_nphy_PWR0_MASK 0x00FF +#define PRXS1_nphy_PWR1_MASK 0xFF00 + +/* HTPHY Rx Status defines */ +/* htphy PhyRxStatus_0: those bit are overlapped with PhyRxStatus_0 */ +#define PRXS0_BAND 0x0400 /* 0 = 2.4G, 1 = 5G */ +#define PRXS0_RSVD 0x0800 /* reserved; set to 0 */ +#define PRXS0_UNUSED 0xF000 /* unused and not defined; set to 0 */ + +/* htphy PhyRxStatus_1: */ +/* core enables for {3..0}, 0=disabled, 1=enabled */ +#define PRXS1_HTPHY_CORE_MASK 0x000F +/* antenna configation */ +#define PRXS1_HTPHY_ANTCFG_MASK 0x00F0 +/* Mixmode PLCP Length low byte mask */ +#define PRXS1_HTPHY_MMPLCPLenL_MASK 0xFF00 + +/* htphy PhyRxStatus_2: */ +/* Mixmode PLCP Length high byte maskw */ +#define PRXS2_HTPHY_MMPLCPLenH_MASK 0x000F +/* Mixmode PLCP rate mask */ +#define PRXS2_HTPHY_MMPLCH_RATE_MASK 0x00F0 +/* Rx power on core 0 */ +#define PRXS2_HTPHY_RXPWR_ANT0 0xFF00 + +/* htphy PhyRxStatus_3: */ +/* Rx power on core 1 */ +#define PRXS3_HTPHY_RXPWR_ANT1 0x00FF +/* Rx power on core 2 */ +#define PRXS3_HTPHY_RXPWR_ANT2 0xFF00 + +/* htphy PhyRxStatus_4: */ +/* Rx power on core 3 */ +#define PRXS4_HTPHY_RXPWR_ANT3 0x00FF +/* Coarse frequency offset */ +#define PRXS4_HTPHY_CFO 0xFF00 + +/* htphy PhyRxStatus_5: */ +/* Fine frequency offset */ +#define PRXS5_HTPHY_FFO 0x00FF +/* Advance Retard */ +#define PRXS5_HTPHY_AR 0xFF00 + +#define HTPHY_MMPLCPLen(rxs) \ + ((((rxs)->PhyRxStatus_1 & PRXS1_HTPHY_MMPLCPLenL_MASK) >> 8) | \ + (((rxs)->PhyRxStatus_2 & PRXS2_HTPHY_MMPLCPLenH_MASK) << 8)) +/* Get Rx power on core 0 */ +#define HTPHY_RXPWR_ANT0(rxs) \ + ((((rxs)->PhyRxStatus_2) & PRXS2_HTPHY_RXPWR_ANT0) >> 8) +/* Get Rx power on core 1 */ +#define HTPHY_RXPWR_ANT1(rxs) \ + (((rxs)->PhyRxStatus_3) & PRXS3_HTPHY_RXPWR_ANT1) +/* Get Rx power on core 2 */ +#define HTPHY_RXPWR_ANT2(rxs) \ + ((((rxs)->PhyRxStatus_3) & PRXS3_HTPHY_RXPWR_ANT2) >> 8) + +/* ucode RxStatus1: */ +#define RXS_BCNSENT 0x8000 +#define RXS_SECKINDX_MASK 0x07e0 +#define RXS_SECKINDX_SHIFT 5 +#define RXS_DECERR (1 << 4) +#define RXS_DECATMPT (1 << 3) +/* PAD bytes to make IP data 4 bytes aligned */ +#define RXS_PBPRES (1 << 2) +#define RXS_RESPFRAMETX (1 << 1) +#define RXS_FCSERR (1 << 0) + +/* ucode RxStatus2: */ +#define RXS_AMSDU_MASK 1 +#define RXS_AGGTYPE_MASK 0x6 +#define RXS_AGGTYPE_SHIFT 1 +#define RXS_PHYRXST_VALID (1 << 8) +#define RXS_RXANT_MASK 0x3 +#define RXS_RXANT_SHIFT 12 + +/* RxChan */ +#define RXS_CHAN_40 0x1000 +#define RXS_CHAN_5G 0x0800 +#define RXS_CHAN_ID_MASK 0x07f8 +#define RXS_CHAN_ID_SHIFT 3 +#define RXS_CHAN_PHYTYPE_MASK 0x0007 +#define RXS_CHAN_PHYTYPE_SHIFT 0 + +/* Index of attenuations used during ucode power control. */ +#define M_PWRIND_BLKS (0x184 * 2) +#define M_PWRIND_MAP0 (M_PWRIND_BLKS + 0x0) +#define M_PWRIND_MAP1 (M_PWRIND_BLKS + 0x2) +#define M_PWRIND_MAP2 (M_PWRIND_BLKS + 0x4) +#define M_PWRIND_MAP3 (M_PWRIND_BLKS + 0x6) +/* M_PWRIND_MAP(core) macro */ +#define M_PWRIND_MAP(core) (M_PWRIND_BLKS + ((core)<<1)) + +/* PSM SHM variable offsets */ +#define M_PSM_SOFT_REGS 0x0 +#define M_BOM_REV_MAJOR (M_PSM_SOFT_REGS + 0x0) +#define M_BOM_REV_MINOR (M_PSM_SOFT_REGS + 0x2) +#define M_UCODE_DBGST (M_PSM_SOFT_REGS + 0x40) /* ucode debug status code */ +#define M_UCODE_MACSTAT (M_PSM_SOFT_REGS + 0xE0) /* macstat counters */ + +#define M_AGING_THRSH (0x3e * 2) /* max time waiting for medium before tx */ +#define M_MBURST_SIZE (0x40 * 2) /* max frames in a frameburst */ +#define M_MBURST_TXOP (0x41 * 2) /* max frameburst TXOP in unit of us */ +#define M_SYNTHPU_DLY (0x4a * 2) /* pre-wakeup for synthpu, default: 500 */ +#define M_PRETBTT (0x4b * 2) + +/* offset to the target txpwr */ +#define M_ALT_TXPWR_IDX (M_PSM_SOFT_REGS + (0x3b * 2)) +#define M_PHY_TX_FLT_PTR (M_PSM_SOFT_REGS + (0x3d * 2)) +#define M_CTS_DURATION (M_PSM_SOFT_REGS + (0x5c * 2)) +#define M_LP_RCCAL_OVR (M_PSM_SOFT_REGS + (0x6b * 2)) + +/* PKTENG Rx Stats Block */ +#define M_RXSTATS_BLK_PTR (M_PSM_SOFT_REGS + (0x65 * 2)) + +/* ucode debug status codes */ +/* not valid really */ +#define DBGST_INACTIVE 0 +/* after zeroing SHM, before suspending at init */ +#define DBGST_INIT 1 +/* "normal" state */ +#define DBGST_ACTIVE 2 +/* suspended */ +#define DBGST_SUSPENDED 3 +/* asleep (PS mode) */ +#define DBGST_ASLEEP 4 + +/* Scratch Reg defs */ +enum _ePsmScratchPadRegDefinitions { + S_RSV0 = 0, + S_RSV1, + S_RSV2, + + /* offset 0x03: scratch registers for Dot11-contants */ + S_DOT11_CWMIN, /* CW-minimum */ + S_DOT11_CWMAX, /* CW-maximum */ + S_DOT11_CWCUR, /* CW-current */ + S_DOT11_SRC_LMT, /* short retry count limit */ + S_DOT11_LRC_LMT, /* long retry count limit */ + S_DOT11_DTIMCOUNT, /* DTIM-count */ + + /* offset 0x09: Tx-side scratch registers */ + S_SEQ_NUM, /* hardware sequence number reg */ + S_SEQ_NUM_FRAG, /* seq num for frags (at the start of MSDU) */ + S_FRMRETX_CNT, /* frame retx count */ + S_SSRC, /* Station short retry count */ + S_SLRC, /* Station long retry count */ + S_EXP_RSP, /* Expected response frame */ + S_OLD_BREM, /* Remaining backoff ctr */ + S_OLD_CWWIN, /* saved-off CW-cur */ + S_TXECTL, /* TXE-Ctl word constructed in scr-pad */ + S_CTXTST, /* frm type-subtype as read from Tx-descr */ + + /* offset 0x13: Rx-side scratch registers */ + S_RXTST, /* Type and subtype in Rxframe */ + + /* Global state register */ + S_STREG, /* state storage actual bit maps below */ + + S_TXPWR_SUM, /* Tx power control: accumulator */ + S_TXPWR_ITER, /* Tx power control: iteration */ + S_RX_FRMTYPE, /* Rate and PHY type for frames */ + S_THIS_AGG, /* Size of this AGG (A-MSDU) */ + + S_KEYINDX, + S_RXFRMLEN, /* Receive MPDU length in bytes */ + + /* offset 0x1B: Receive TSF time stored in SCR */ + S_RXTSFTMRVAL_WD3, /* TSF value at the start of rx */ + S_RXTSFTMRVAL_WD2, /* TSF value at the start of rx */ + S_RXTSFTMRVAL_WD1, /* TSF value at the start of rx */ + S_RXTSFTMRVAL_WD0, /* TSF value at the start of rx */ + S_RXSSN, /* Received start seq number for A-MPDU BA */ + S_RXQOSFLD, /* Rx-QoS field (if present) */ + + /* offset 0x21: Scratch pad regs used in microcode as temp storage */ + S_TMP0, /* stmp0 */ + S_TMP1, /* stmp1 */ + S_TMP2, /* stmp2 */ + S_TMP3, /* stmp3 */ + S_TMP4, /* stmp4 */ + S_TMP5, /* stmp5 */ + S_PRQPENALTY_CTR, /* Probe response queue penalty counter */ + S_ANTCNT, /* unsuccessful attempts on current ant. */ + S_SYMBOL, /* flag for possible symbol ctl frames */ + S_RXTP, /* rx frame type */ + S_STREG2, /* extra state storage */ + S_STREG3, /* even more extra state storage */ + S_STREG4, /* ... */ + S_STREG5, /* remember to initialize it to zero */ + + S_ADJPWR_IDX, + S_CUR_PTR, /* Temp pointer for A-MPDU re-Tx SHM table */ + S_REVID4, /* 0x33 */ + S_INDX, /* 0x34 */ + S_ADDR0, /* 0x35 */ + S_ADDR1, /* 0x36 */ + S_ADDR2, /* 0x37 */ + S_ADDR3, /* 0x38 */ + S_ADDR4, /* 0x39 */ + S_ADDR5, /* 0x3A */ + S_TMP6, /* 0x3B */ + S_KEYINDX_BU, /* Backup for Key index */ + S_MFGTEST_TMP0, /* Temp regs used for RX test calculations */ + S_RXESN, /* Received end sequence number for A-MPDU BA */ + S_STREG6, /* 0x3F */ +}; + +#define S_BEACON_INDX S_OLD_BREM +#define S_PRS_INDX S_OLD_CWWIN +#define S_PHYTYPE S_SSRC +#define S_PHYVER S_SLRC + +/* IHR SLOW_CTRL values */ +#define SLOW_CTRL_PDE (1 << 0) +#define SLOW_CTRL_FD (1 << 8) + +/* ucode mac statistic counters in shared memory */ +struct macstat { + u16 txallfrm; /* 0x80 */ + u16 txrtsfrm; /* 0x82 */ + u16 txctsfrm; /* 0x84 */ + u16 txackfrm; /* 0x86 */ + u16 txdnlfrm; /* 0x88 */ + u16 txbcnfrm; /* 0x8a */ + u16 txfunfl[8]; /* 0x8c - 0x9b */ + u16 txtplunfl; /* 0x9c */ + u16 txphyerr; /* 0x9e */ + u16 pktengrxducast; /* 0xa0 */ + u16 pktengrxdmcast; /* 0xa2 */ + u16 rxfrmtoolong; /* 0xa4 */ + u16 rxfrmtooshrt; /* 0xa6 */ + u16 rxinvmachdr; /* 0xa8 */ + u16 rxbadfcs; /* 0xaa */ + u16 rxbadplcp; /* 0xac */ + u16 rxcrsglitch; /* 0xae */ + u16 rxstrt; /* 0xb0 */ + u16 rxdfrmucastmbss; /* 0xb2 */ + u16 rxmfrmucastmbss; /* 0xb4 */ + u16 rxcfrmucast; /* 0xb6 */ + u16 rxrtsucast; /* 0xb8 */ + u16 rxctsucast; /* 0xba */ + u16 rxackucast; /* 0xbc */ + u16 rxdfrmocast; /* 0xbe */ + u16 rxmfrmocast; /* 0xc0 */ + u16 rxcfrmocast; /* 0xc2 */ + u16 rxrtsocast; /* 0xc4 */ + u16 rxctsocast; /* 0xc6 */ + u16 rxdfrmmcast; /* 0xc8 */ + u16 rxmfrmmcast; /* 0xca */ + u16 rxcfrmmcast; /* 0xcc */ + u16 rxbeaconmbss; /* 0xce */ + u16 rxdfrmucastobss; /* 0xd0 */ + u16 rxbeaconobss; /* 0xd2 */ + u16 rxrsptmout; /* 0xd4 */ + u16 bcntxcancl; /* 0xd6 */ + u16 PAD; + u16 rxf0ovfl; /* 0xda */ + u16 rxf1ovfl; /* 0xdc */ + u16 rxf2ovfl; /* 0xde */ + u16 txsfovfl; /* 0xe0 */ + u16 pmqovfl; /* 0xe2 */ + u16 rxcgprqfrm; /* 0xe4 */ + u16 rxcgprsqovfl; /* 0xe6 */ + u16 txcgprsfail; /* 0xe8 */ + u16 txcgprssuc; /* 0xea */ + u16 prs_timeout; /* 0xec */ + u16 rxnack; + u16 frmscons; + u16 txnack; + u16 txglitch_nack; + u16 txburst; /* 0xf6 # tx bursts */ + u16 bphy_rxcrsglitch; /* bphy rx crs glitch */ + u16 phywatchdog; /* 0xfa # of phy watchdog events */ + u16 PAD; + u16 bphy_badplcp; /* bphy bad plcp */ +}; + +/* dot11 core-specific control flags */ +#define SICF_PCLKE 0x0004 /* PHY clock enable */ +#define SICF_PRST 0x0008 /* PHY reset */ +#define SICF_MPCLKE 0x0010 /* MAC PHY clockcontrol enable */ +#define SICF_FREF 0x0020 /* PLL FreqRefSelect */ +/* NOTE: the following bw bits only apply when the core is attached + * to a NPHY + */ +#define SICF_BWMASK 0x00c0 /* phy clock mask (b6 & b7) */ +#define SICF_BW40 0x0080 /* 40MHz BW (160MHz phyclk) */ +#define SICF_BW20 0x0040 /* 20MHz BW (80MHz phyclk) */ +#define SICF_BW10 0x0000 /* 10MHz BW (40MHz phyclk) */ +#define SICF_GMODE 0x2000 /* gmode enable */ + +/* dot11 core-specific status flags */ +#define SISF_2G_PHY 0x0001 /* 2.4G capable phy */ +#define SISF_5G_PHY 0x0002 /* 5G capable phy */ +#define SISF_FCLKA 0x0004 /* FastClkAvailable */ +#define SISF_DB_PHY 0x0008 /* Dualband phy */ + +/* === End of MAC reg, Beginning of PHY(b/a/g/n) reg === */ +/* radio and LPPHY regs are separated */ + +#define BPHY_REG_OFT_BASE 0x0 +/* offsets for indirect access to bphy registers */ +#define BPHY_BB_CONFIG 0x01 +#define BPHY_ADCBIAS 0x02 +#define BPHY_ANACORE 0x03 +#define BPHY_PHYCRSTH 0x06 +#define BPHY_TEST 0x0a +#define BPHY_PA_TX_TO 0x10 +#define BPHY_SYNTH_DC_TO 0x11 +#define BPHY_PA_TX_TIME_UP 0x12 +#define BPHY_RX_FLTR_TIME_UP 0x13 +#define BPHY_TX_POWER_OVERRIDE 0x14 +#define BPHY_RF_OVERRIDE 0x15 +#define BPHY_RF_TR_LOOKUP1 0x16 +#define BPHY_RF_TR_LOOKUP2 0x17 +#define BPHY_COEFFS 0x18 +#define BPHY_PLL_OUT 0x19 +#define BPHY_REFRESH_MAIN 0x1a +#define BPHY_REFRESH_TO0 0x1b +#define BPHY_REFRESH_TO1 0x1c +#define BPHY_RSSI_TRESH 0x20 +#define BPHY_IQ_TRESH_HH 0x21 +#define BPHY_IQ_TRESH_H 0x22 +#define BPHY_IQ_TRESH_L 0x23 +#define BPHY_IQ_TRESH_LL 0x24 +#define BPHY_GAIN 0x25 +#define BPHY_LNA_GAIN_RANGE 0x26 +#define BPHY_JSSI 0x27 +#define BPHY_TSSI_CTL 0x28 +#define BPHY_TSSI 0x29 +#define BPHY_TR_LOSS_CTL 0x2a +#define BPHY_LO_LEAKAGE 0x2b +#define BPHY_LO_RSSI_ACC 0x2c +#define BPHY_LO_IQMAG_ACC 0x2d +#define BPHY_TX_DC_OFF1 0x2e +#define BPHY_TX_DC_OFF2 0x2f +#define BPHY_PEAK_CNT_THRESH 0x30 +#define BPHY_FREQ_OFFSET 0x31 +#define BPHY_DIVERSITY_CTL 0x32 +#define BPHY_PEAK_ENERGY_LO 0x33 +#define BPHY_PEAK_ENERGY_HI 0x34 +#define BPHY_SYNC_CTL 0x35 +#define BPHY_TX_PWR_CTRL 0x36 +#define BPHY_TX_EST_PWR 0x37 +#define BPHY_STEP 0x38 +#define BPHY_WARMUP 0x39 +#define BPHY_LMS_CFF_READ 0x3a +#define BPHY_LMS_COEFF_I 0x3b +#define BPHY_LMS_COEFF_Q 0x3c +#define BPHY_SIG_POW 0x3d +#define BPHY_RFDC_CANCEL_CTL 0x3e +#define BPHY_HDR_TYPE 0x40 +#define BPHY_SFD_TO 0x41 +#define BPHY_SFD_CTL 0x42 +#define BPHY_DEBUG 0x43 +#define BPHY_RX_DELAY_COMP 0x44 +#define BPHY_CRS_DROP_TO 0x45 +#define BPHY_SHORT_SFD_NZEROS 0x46 +#define BPHY_DSSS_COEFF1 0x48 +#define BPHY_DSSS_COEFF2 0x49 +#define BPHY_CCK_COEFF1 0x4a +#define BPHY_CCK_COEFF2 0x4b +#define BPHY_TR_CORR 0x4c +#define BPHY_ANGLE_SCALE 0x4d +#define BPHY_TX_PWR_BASE_IDX 0x4e +#define BPHY_OPTIONAL_MODES2 0x4f +#define BPHY_CCK_LMS_STEP 0x50 +#define BPHY_BYPASS 0x51 +#define BPHY_CCK_DELAY_LONG 0x52 +#define BPHY_CCK_DELAY_SHORT 0x53 +#define BPHY_PPROC_CHAN_DELAY 0x54 +#define BPHY_DDFS_ENABLE 0x58 +#define BPHY_PHASE_SCALE 0x59 +#define BPHY_FREQ_CONTROL 0x5a +#define BPHY_LNA_GAIN_RANGE_10 0x5b +#define BPHY_LNA_GAIN_RANGE_32 0x5c +#define BPHY_OPTIONAL_MODES 0x5d +#define BPHY_RX_STATUS2 0x5e +#define BPHY_RX_STATUS3 0x5f +#define BPHY_DAC_CONTROL 0x60 +#define BPHY_ANA11G_FILT_CTRL 0x62 +#define BPHY_REFRESH_CTRL 0x64 +#define BPHY_RF_OVERRIDE2 0x65 +#define BPHY_SPUR_CANCEL_CTRL 0x66 +#define BPHY_FINE_DIGIGAIN_CTRL 0x67 +#define BPHY_RSSI_LUT 0x88 +#define BPHY_RSSI_LUT_END 0xa7 +#define BPHY_TSSI_LUT 0xa8 +#define BPHY_TSSI_LUT_END 0xc7 +#define BPHY_TSSI2PWR_LUT 0x380 +#define BPHY_TSSI2PWR_LUT_END 0x39f +#define BPHY_LOCOMP_LUT 0x3a0 +#define BPHY_LOCOMP_LUT_END 0x3bf +#define BPHY_TXGAIN_LUT 0x3c0 +#define BPHY_TXGAIN_LUT_END 0x3ff + +/* Bits in BB_CONFIG: */ +#define PHY_BBC_ANT_MASK 0x0180 +#define PHY_BBC_ANT_SHIFT 7 +#define BB_DARWIN 0x1000 +#define BBCFG_RESETCCA 0x4000 +#define BBCFG_RESETRX 0x8000 + +/* Bits in phytest(0x0a): */ +#define TST_DDFS 0x2000 +#define TST_TXFILT1 0x0800 +#define TST_UNSCRAM 0x0400 +#define TST_CARR_SUPP 0x0200 +#define TST_DC_COMP_LOOP 0x0100 +#define TST_LOOPBACK 0x0080 +#define TST_TXFILT0 0x0040 +#define TST_TXTEST_ENABLE 0x0020 +#define TST_TXTEST_RATE 0x0018 +#define TST_TXTEST_PHASE 0x0007 + +/* phytest txTestRate values */ +#define TST_TXTEST_RATE_1MBPS 0 +#define TST_TXTEST_RATE_2MBPS 1 +#define TST_TXTEST_RATE_5_5MBPS 2 +#define TST_TXTEST_RATE_11MBPS 3 +#define TST_TXTEST_RATE_SHIFT 3 + +#define SHM_BYT_CNT 0x2 /* IHR location */ +#define MAX_BYT_CNT 0x600 /* Maximum frame len */ + +struct d11cnt { + u32 txfrag; + u32 txmulti; + u32 txfail; + u32 txretry; + u32 txretrie; + u32 rxdup; + u32 txrts; + u32 txnocts; + u32 txnoack; + u32 rxfrag; + u32 rxmulti; + u32 rxcrc; + u32 txfrmsnt; + u32 rxundec; +}; + +#endif /* _BRCM_D11_H_ */ |