summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlegacy/4965-rs.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/intel/iwlegacy/4965-rs.c')
-rw-r--r--drivers/net/wireless/intel/iwlegacy/4965-rs.c2835
1 files changed, 2835 insertions, 0 deletions
diff --git a/drivers/net/wireless/intel/iwlegacy/4965-rs.c b/drivers/net/wireless/intel/iwlegacy/4965-rs.c
new file mode 100644
index 0000000..aed3b0b
--- /dev/null
+++ b/drivers/net/wireless/intel/iwlegacy/4965-rs.c
@@ -0,0 +1,2835 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+#include <linux/kernel.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <net/mac80211.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+
+#include <linux/workqueue.h>
+
+#include "common.h"
+#include "4965.h"
+
+#define IL4965_RS_NAME "iwl-4965-rs"
+
+#define NUM_TRY_BEFORE_ANT_TOGGLE 1
+#define IL_NUMBER_TRY 1
+#define IL_HT_NUMBER_TRY 3
+
+#define RATE_MAX_WINDOW 62 /* # tx in history win */
+#define RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */
+#define RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */
+
+/* max allowed rate miss before sync LQ cmd */
+#define IL_MISSED_RATE_MAX 15
+/* max time to accum history 2 seconds */
+#define RATE_SCALE_FLUSH_INTVL (3*HZ)
+
+static u8 rs_ht_to_legacy[] = {
+ RATE_6M_IDX, RATE_6M_IDX,
+ RATE_6M_IDX, RATE_6M_IDX,
+ RATE_6M_IDX,
+ RATE_6M_IDX, RATE_9M_IDX,
+ RATE_12M_IDX, RATE_18M_IDX,
+ RATE_24M_IDX, RATE_36M_IDX,
+ RATE_48M_IDX, RATE_54M_IDX
+};
+
+static const u8 ant_toggle_lookup[] = {
+ /*ANT_NONE -> */ ANT_NONE,
+ /*ANT_A -> */ ANT_B,
+ /*ANT_B -> */ ANT_C,
+ /*ANT_AB -> */ ANT_BC,
+ /*ANT_C -> */ ANT_A,
+ /*ANT_AC -> */ ANT_AB,
+ /*ANT_BC -> */ ANT_AC,
+ /*ANT_ABC -> */ ANT_ABC,
+};
+
+#define IL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \
+ [RATE_##r##M_IDX] = { RATE_##r##M_PLCP, \
+ RATE_SISO_##s##M_PLCP, \
+ RATE_MIMO2_##s##M_PLCP,\
+ RATE_##r##M_IEEE, \
+ RATE_##ip##M_IDX, \
+ RATE_##in##M_IDX, \
+ RATE_##rp##M_IDX, \
+ RATE_##rn##M_IDX, \
+ RATE_##pp##M_IDX, \
+ RATE_##np##M_IDX }
+
+/*
+ * Parameter order:
+ * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
+ *
+ * If there isn't a valid next or previous rate then INV is used which
+ * maps to RATE_INVALID
+ *
+ */
+const struct il_rate_info il_rates[RATE_COUNT] = {
+ IL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */
+ IL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */
+ IL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */
+ IL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */
+ IL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */
+ IL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */
+ IL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */
+ IL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */
+ IL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */
+ IL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */
+ IL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */
+ IL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */
+ IL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */
+};
+
+static int
+il4965_hwrate_to_plcp_idx(u32 rate_n_flags)
+{
+ int idx = 0;
+
+ /* HT rate format */
+ if (rate_n_flags & RATE_MCS_HT_MSK) {
+ idx = (rate_n_flags & 0xff);
+
+ if (idx >= RATE_MIMO2_6M_PLCP)
+ idx = idx - RATE_MIMO2_6M_PLCP;
+
+ idx += IL_FIRST_OFDM_RATE;
+ /* skip 9M not supported in ht */
+ if (idx >= RATE_9M_IDX)
+ idx += 1;
+ if (idx >= IL_FIRST_OFDM_RATE && idx <= IL_LAST_OFDM_RATE)
+ return idx;
+
+ /* legacy rate format, search for match in table */
+ } else {
+ for (idx = 0; idx < ARRAY_SIZE(il_rates); idx++)
+ if (il_rates[idx].plcp == (rate_n_flags & 0xFF))
+ return idx;
+ }
+
+ return -1;
+}
+
+static void il4965_rs_rate_scale_perform(struct il_priv *il,
+ struct sk_buff *skb,
+ struct ieee80211_sta *sta,
+ struct il_lq_sta *lq_sta);
+static void il4965_rs_fill_link_cmd(struct il_priv *il,
+ struct il_lq_sta *lq_sta, u32 rate_n_flags);
+static void il4965_rs_stay_in_table(struct il_lq_sta *lq_sta,
+ bool force_search);
+
+#ifdef CPTCFG_MAC80211_DEBUGFS
+static void il4965_rs_dbgfs_set_mcs(struct il_lq_sta *lq_sta,
+ u32 *rate_n_flags, int idx);
+#else
+static void
+il4965_rs_dbgfs_set_mcs(struct il_lq_sta *lq_sta, u32 * rate_n_flags, int idx)
+{
+}
+#endif
+
+/**
+ * The following tables contain the expected throughput metrics for all rates
+ *
+ * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits
+ *
+ * where invalid entries are zeros.
+ *
+ * CCK rates are only valid in legacy table and will only be used in G
+ * (2.4 GHz) band.
+ */
+
+static s32 expected_tpt_legacy[RATE_COUNT] = {
+ 7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0
+};
+
+static s32 expected_tpt_siso20MHz[4][RATE_COUNT] = {
+ {0, 0, 0, 0, 42, 0, 76, 102, 124, 158, 183, 193, 202}, /* Norm */
+ {0, 0, 0, 0, 46, 0, 82, 110, 132, 167, 192, 202, 210}, /* SGI */
+ {0, 0, 0, 0, 48, 0, 93, 135, 176, 251, 319, 351, 381}, /* AGG */
+ {0, 0, 0, 0, 53, 0, 102, 149, 193, 275, 348, 381, 413}, /* AGG+SGI */
+};
+
+static s32 expected_tpt_siso40MHz[4][RATE_COUNT] = {
+ {0, 0, 0, 0, 77, 0, 127, 160, 184, 220, 242, 250, 257}, /* Norm */
+ {0, 0, 0, 0, 83, 0, 135, 169, 193, 229, 250, 257, 264}, /* SGI */
+ {0, 0, 0, 0, 96, 0, 182, 259, 328, 451, 553, 598, 640}, /* AGG */
+ {0, 0, 0, 0, 106, 0, 199, 282, 357, 487, 593, 640, 683}, /* AGG+SGI */
+};
+
+static s32 expected_tpt_mimo2_20MHz[4][RATE_COUNT] = {
+ {0, 0, 0, 0, 74, 0, 123, 155, 179, 213, 235, 243, 250}, /* Norm */
+ {0, 0, 0, 0, 81, 0, 131, 164, 187, 221, 242, 250, 256}, /* SGI */
+ {0, 0, 0, 0, 92, 0, 175, 250, 317, 436, 534, 578, 619}, /* AGG */
+ {0, 0, 0, 0, 102, 0, 192, 273, 344, 470, 573, 619, 660}, /* AGG+SGI */
+};
+
+static s32 expected_tpt_mimo2_40MHz[4][RATE_COUNT] = {
+ {0, 0, 0, 0, 123, 0, 182, 214, 235, 264, 279, 285, 289}, /* Norm */
+ {0, 0, 0, 0, 131, 0, 191, 222, 242, 270, 284, 289, 293}, /* SGI */
+ {0, 0, 0, 0, 180, 0, 327, 446, 545, 708, 828, 878, 922}, /* AGG */
+ {0, 0, 0, 0, 197, 0, 355, 481, 584, 752, 872, 922, 966}, /* AGG+SGI */
+};
+
+/* mbps, mcs */
+static const struct il_rate_mcs_info il_rate_mcs[RATE_COUNT] = {
+ {"1", "BPSK DSSS"},
+ {"2", "QPSK DSSS"},
+ {"5.5", "BPSK CCK"},
+ {"11", "QPSK CCK"},
+ {"6", "BPSK 1/2"},
+ {"9", "BPSK 1/2"},
+ {"12", "QPSK 1/2"},
+ {"18", "QPSK 3/4"},
+ {"24", "16QAM 1/2"},
+ {"36", "16QAM 3/4"},
+ {"48", "64QAM 2/3"},
+ {"54", "64QAM 3/4"},
+ {"60", "64QAM 5/6"},
+};
+
+#define MCS_IDX_PER_STREAM (8)
+
+static inline u8
+il4965_rs_extract_rate(u32 rate_n_flags)
+{
+ return (u8) (rate_n_flags & 0xFF);
+}
+
+static void
+il4965_rs_rate_scale_clear_win(struct il_rate_scale_data *win)
+{
+ win->data = 0;
+ win->success_counter = 0;
+ win->success_ratio = IL_INVALID_VALUE;
+ win->counter = 0;
+ win->average_tpt = IL_INVALID_VALUE;
+ win->stamp = 0;
+}
+
+static inline u8
+il4965_rs_is_valid_ant(u8 valid_antenna, u8 ant_type)
+{
+ return (ant_type & valid_antenna) == ant_type;
+}
+
+/*
+ * removes the old data from the stats. All data that is older than
+ * TID_MAX_TIME_DIFF, will be deleted.
+ */
+static void
+il4965_rs_tl_rm_old_stats(struct il_traffic_load *tl, u32 curr_time)
+{
+ /* The oldest age we want to keep */
+ u32 oldest_time = curr_time - TID_MAX_TIME_DIFF;
+
+ while (tl->queue_count && tl->time_stamp < oldest_time) {
+ tl->total -= tl->packet_count[tl->head];
+ tl->packet_count[tl->head] = 0;
+ tl->time_stamp += TID_QUEUE_CELL_SPACING;
+ tl->queue_count--;
+ tl->head++;
+ if (tl->head >= TID_QUEUE_MAX_SIZE)
+ tl->head = 0;
+ }
+}
+
+/*
+ * increment traffic load value for tid and also remove
+ * any old values if passed the certain time period
+ */
+static u8
+il4965_rs_tl_add_packet(struct il_lq_sta *lq_data, struct ieee80211_hdr *hdr)
+{
+ u32 curr_time = jiffies_to_msecs(jiffies);
+ u32 time_diff;
+ s32 idx;
+ struct il_traffic_load *tl = NULL;
+ u8 tid;
+
+ if (ieee80211_is_data_qos(hdr->frame_control)) {
+ u8 *qc = ieee80211_get_qos_ctl(hdr);
+ tid = qc[0] & 0xf;
+ } else
+ return MAX_TID_COUNT;
+
+ if (unlikely(tid >= TID_MAX_LOAD_COUNT))
+ return MAX_TID_COUNT;
+
+ tl = &lq_data->load[tid];
+
+ curr_time -= curr_time % TID_ROUND_VALUE;
+
+ /* Happens only for the first packet. Initialize the data */
+ if (!(tl->queue_count)) {
+ tl->total = 1;
+ tl->time_stamp = curr_time;
+ tl->queue_count = 1;
+ tl->head = 0;
+ tl->packet_count[0] = 1;
+ return MAX_TID_COUNT;
+ }
+
+ time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
+ idx = time_diff / TID_QUEUE_CELL_SPACING;
+
+ /* The history is too long: remove data that is older than */
+ /* TID_MAX_TIME_DIFF */
+ if (idx >= TID_QUEUE_MAX_SIZE)
+ il4965_rs_tl_rm_old_stats(tl, curr_time);
+
+ idx = (tl->head + idx) % TID_QUEUE_MAX_SIZE;
+ tl->packet_count[idx] = tl->packet_count[idx] + 1;
+ tl->total = tl->total + 1;
+
+ if ((idx + 1) > tl->queue_count)
+ tl->queue_count = idx + 1;
+
+ return tid;
+}
+
+/*
+ get the traffic load value for tid
+*/
+static u32
+il4965_rs_tl_get_load(struct il_lq_sta *lq_data, u8 tid)
+{
+ u32 curr_time = jiffies_to_msecs(jiffies);
+ u32 time_diff;
+ s32 idx;
+ struct il_traffic_load *tl = NULL;
+
+ if (tid >= TID_MAX_LOAD_COUNT)
+ return 0;
+
+ tl = &(lq_data->load[tid]);
+
+ curr_time -= curr_time % TID_ROUND_VALUE;
+
+ if (!(tl->queue_count))
+ return 0;
+
+ time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
+ idx = time_diff / TID_QUEUE_CELL_SPACING;
+
+ /* The history is too long: remove data that is older than */
+ /* TID_MAX_TIME_DIFF */
+ if (idx >= TID_QUEUE_MAX_SIZE)
+ il4965_rs_tl_rm_old_stats(tl, curr_time);
+
+ return tl->total;
+}
+
+static int
+il4965_rs_tl_turn_on_agg_for_tid(struct il_priv *il, struct il_lq_sta *lq_data,
+ u8 tid, struct ieee80211_sta *sta)
+{
+ int ret = -EAGAIN;
+ u32 load;
+
+ load = il4965_rs_tl_get_load(lq_data, tid);
+
+ if (load > IL_AGG_LOAD_THRESHOLD) {
+ D_HT("Starting Tx agg: STA: %pM tid: %d\n", sta->addr, tid);
+ ret = ieee80211_start_tx_ba_session(sta, tid, 5000);
+ if (ret == -EAGAIN) {
+ /*
+ * driver and mac80211 is out of sync
+ * this might be cause by reloading firmware
+ * stop the tx ba session here
+ */
+ IL_ERR("Fail start Tx agg on tid: %d\n", tid);
+ ieee80211_stop_tx_ba_session(sta, tid);
+ }
+ } else
+ D_HT("Aggregation not enabled for tid %d because load = %u\n",
+ tid, load);
+
+ return ret;
+}
+
+static void
+il4965_rs_tl_turn_on_agg(struct il_priv *il, u8 tid, struct il_lq_sta *lq_data,
+ struct ieee80211_sta *sta)
+{
+ if (tid < TID_MAX_LOAD_COUNT)
+ il4965_rs_tl_turn_on_agg_for_tid(il, lq_data, tid, sta);
+ else
+ IL_ERR("tid exceeds max load count: %d/%d\n", tid,
+ TID_MAX_LOAD_COUNT);
+}
+
+static inline int
+il4965_get_il4965_num_of_ant_from_rate(u32 rate_n_flags)
+{
+ return !!(rate_n_flags & RATE_MCS_ANT_A_MSK) +
+ !!(rate_n_flags & RATE_MCS_ANT_B_MSK) +
+ !!(rate_n_flags & RATE_MCS_ANT_C_MSK);
+}
+
+/*
+ * Static function to get the expected throughput from an il_scale_tbl_info
+ * that wraps a NULL pointer check
+ */
+static s32
+il4965_get_expected_tpt(struct il_scale_tbl_info *tbl, int rs_idx)
+{
+ if (tbl->expected_tpt)
+ return tbl->expected_tpt[rs_idx];
+ return 0;
+}
+
+/**
+ * il4965_rs_collect_tx_data - Update the success/failure sliding win
+ *
+ * We keep a sliding win of the last 62 packets transmitted
+ * at this rate. win->data contains the bitmask of successful
+ * packets.
+ */
+static int
+il4965_rs_collect_tx_data(struct il_scale_tbl_info *tbl, int scale_idx,
+ int attempts, int successes)
+{
+ struct il_rate_scale_data *win = NULL;
+ static const u64 mask = (((u64) 1) << (RATE_MAX_WINDOW - 1));
+ s32 fail_count, tpt;
+
+ if (scale_idx < 0 || scale_idx >= RATE_COUNT)
+ return -EINVAL;
+
+ /* Select win for current tx bit rate */
+ win = &(tbl->win[scale_idx]);
+
+ /* Get expected throughput */
+ tpt = il4965_get_expected_tpt(tbl, scale_idx);
+
+ /*
+ * Keep track of only the latest 62 tx frame attempts in this rate's
+ * history win; anything older isn't really relevant any more.
+ * If we have filled up the sliding win, drop the oldest attempt;
+ * if the oldest attempt (highest bit in bitmap) shows "success",
+ * subtract "1" from the success counter (this is the main reason
+ * we keep these bitmaps!).
+ */
+ while (attempts > 0) {
+ if (win->counter >= RATE_MAX_WINDOW) {
+
+ /* remove earliest */
+ win->counter = RATE_MAX_WINDOW - 1;
+
+ if (win->data & mask) {
+ win->data &= ~mask;
+ win->success_counter--;
+ }
+ }
+
+ /* Increment frames-attempted counter */
+ win->counter++;
+
+ /* Shift bitmap by one frame to throw away oldest history */
+ win->data <<= 1;
+
+ /* Mark the most recent #successes attempts as successful */
+ if (successes > 0) {
+ win->success_counter++;
+ win->data |= 0x1;
+ successes--;
+ }
+
+ attempts--;
+ }
+
+ /* Calculate current success ratio, avoid divide-by-0! */
+ if (win->counter > 0)
+ win->success_ratio =
+ 128 * (100 * win->success_counter) / win->counter;
+ else
+ win->success_ratio = IL_INVALID_VALUE;
+
+ fail_count = win->counter - win->success_counter;
+
+ /* Calculate average throughput, if we have enough history. */
+ if (fail_count >= RATE_MIN_FAILURE_TH ||
+ win->success_counter >= RATE_MIN_SUCCESS_TH)
+ win->average_tpt = (win->success_ratio * tpt + 64) / 128;
+ else
+ win->average_tpt = IL_INVALID_VALUE;
+
+ /* Tag this win as having been updated */
+ win->stamp = jiffies;
+
+ return 0;
+}
+
+/*
+ * Fill uCode API rate_n_flags field, based on "search" or "active" table.
+ */
+static u32
+il4965_rate_n_flags_from_tbl(struct il_priv *il, struct il_scale_tbl_info *tbl,
+ int idx, u8 use_green)
+{
+ u32 rate_n_flags = 0;
+
+ if (is_legacy(tbl->lq_type)) {
+ rate_n_flags = il_rates[idx].plcp;
+ if (idx >= IL_FIRST_CCK_RATE && idx <= IL_LAST_CCK_RATE)
+ rate_n_flags |= RATE_MCS_CCK_MSK;
+
+ } else if (is_Ht(tbl->lq_type)) {
+ if (idx > IL_LAST_OFDM_RATE) {
+ IL_ERR("Invalid HT rate idx %d\n", idx);
+ idx = IL_LAST_OFDM_RATE;
+ }
+ rate_n_flags = RATE_MCS_HT_MSK;
+
+ if (is_siso(tbl->lq_type))
+ rate_n_flags |= il_rates[idx].plcp_siso;
+ else
+ rate_n_flags |= il_rates[idx].plcp_mimo2;
+ } else {
+ IL_ERR("Invalid tbl->lq_type %d\n", tbl->lq_type);
+ }
+
+ rate_n_flags |=
+ ((tbl->ant_type << RATE_MCS_ANT_POS) & RATE_MCS_ANT_ABC_MSK);
+
+ if (is_Ht(tbl->lq_type)) {
+ if (tbl->is_ht40) {
+ if (tbl->is_dup)
+ rate_n_flags |= RATE_MCS_DUP_MSK;
+ else
+ rate_n_flags |= RATE_MCS_HT40_MSK;
+ }
+ if (tbl->is_SGI)
+ rate_n_flags |= RATE_MCS_SGI_MSK;
+
+ if (use_green) {
+ rate_n_flags |= RATE_MCS_GF_MSK;
+ if (is_siso(tbl->lq_type) && tbl->is_SGI) {
+ rate_n_flags &= ~RATE_MCS_SGI_MSK;
+ IL_ERR("GF was set with SGI:SISO\n");
+ }
+ }
+ }
+ return rate_n_flags;
+}
+
+/*
+ * Interpret uCode API's rate_n_flags format,
+ * fill "search" or "active" tx mode table.
+ */
+static int
+il4965_rs_get_tbl_info_from_mcs(const u32 rate_n_flags,
+ enum nl80211_band band,
+ struct il_scale_tbl_info *tbl, int *rate_idx)
+{
+ u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK);
+ u8 il4965_num_of_ant =
+ il4965_get_il4965_num_of_ant_from_rate(rate_n_flags);
+ u8 mcs;
+
+ memset(tbl, 0, sizeof(struct il_scale_tbl_info));
+ *rate_idx = il4965_hwrate_to_plcp_idx(rate_n_flags);
+
+ if (*rate_idx == RATE_INVALID) {
+ *rate_idx = -1;
+ return -EINVAL;
+ }
+ tbl->is_SGI = 0; /* default legacy setup */
+ tbl->is_ht40 = 0;
+ tbl->is_dup = 0;
+ tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS);
+ tbl->lq_type = LQ_NONE;
+ tbl->max_search = IL_MAX_SEARCH;
+
+ /* legacy rate format */
+ if (!(rate_n_flags & RATE_MCS_HT_MSK)) {
+ if (il4965_num_of_ant == 1) {
+ if (band == NL80211_BAND_5GHZ)
+ tbl->lq_type = LQ_A;
+ else
+ tbl->lq_type = LQ_G;
+ }
+ /* HT rate format */
+ } else {
+ if (rate_n_flags & RATE_MCS_SGI_MSK)
+ tbl->is_SGI = 1;
+
+ if ((rate_n_flags & RATE_MCS_HT40_MSK) ||
+ (rate_n_flags & RATE_MCS_DUP_MSK))
+ tbl->is_ht40 = 1;
+
+ if (rate_n_flags & RATE_MCS_DUP_MSK)
+ tbl->is_dup = 1;
+
+ mcs = il4965_rs_extract_rate(rate_n_flags);
+
+ /* SISO */
+ if (mcs <= RATE_SISO_60M_PLCP) {
+ if (il4965_num_of_ant == 1)
+ tbl->lq_type = LQ_SISO; /*else NONE */
+ /* MIMO2 */
+ } else {
+ if (il4965_num_of_ant == 2)
+ tbl->lq_type = LQ_MIMO2;
+ }
+ }
+ return 0;
+}
+
+/* switch to another antenna/antennas and return 1 */
+/* if no other valid antenna found, return 0 */
+static int
+il4965_rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags,
+ struct il_scale_tbl_info *tbl)
+{
+ u8 new_ant_type;
+
+ if (!tbl->ant_type || tbl->ant_type > ANT_ABC)
+ return 0;
+
+ if (!il4965_rs_is_valid_ant(valid_ant, tbl->ant_type))
+ return 0;
+
+ new_ant_type = ant_toggle_lookup[tbl->ant_type];
+
+ while (new_ant_type != tbl->ant_type &&
+ !il4965_rs_is_valid_ant(valid_ant, new_ant_type))
+ new_ant_type = ant_toggle_lookup[new_ant_type];
+
+ if (new_ant_type == tbl->ant_type)
+ return 0;
+
+ tbl->ant_type = new_ant_type;
+ *rate_n_flags &= ~RATE_MCS_ANT_ABC_MSK;
+ *rate_n_flags |= new_ant_type << RATE_MCS_ANT_POS;
+ return 1;
+}
+
+/**
+ * Green-field mode is valid if the station supports it and
+ * there are no non-GF stations present in the BSS.
+ */
+static bool
+il4965_rs_use_green(struct il_priv *il, struct ieee80211_sta *sta)
+{
+ return (sta->ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD) &&
+ !il->ht.non_gf_sta_present;
+}
+
+/**
+ * il4965_rs_get_supported_rates - get the available rates
+ *
+ * if management frame or broadcast frame only return
+ * basic available rates.
+ *
+ */
+static u16
+il4965_rs_get_supported_rates(struct il_lq_sta *lq_sta,
+ struct ieee80211_hdr *hdr,
+ enum il_table_type rate_type)
+{
+ if (is_legacy(rate_type)) {
+ return lq_sta->active_legacy_rate;
+ } else {
+ if (is_siso(rate_type))
+ return lq_sta->active_siso_rate;
+ else
+ return lq_sta->active_mimo2_rate;
+ }
+}
+
+static u16
+il4965_rs_get_adjacent_rate(struct il_priv *il, u8 idx, u16 rate_mask,
+ int rate_type)
+{
+ u8 high = RATE_INVALID;
+ u8 low = RATE_INVALID;
+
+ /* 802.11A or ht walks to the next literal adjacent rate in
+ * the rate table */
+ if (is_a_band(rate_type) || !is_legacy(rate_type)) {
+ int i;
+ u32 mask;
+
+ /* Find the previous rate that is in the rate mask */
+ i = idx - 1;
+ for (mask = (1 << i); i >= 0; i--, mask >>= 1) {
+ if (rate_mask & mask) {
+ low = i;
+ break;
+ }
+ }
+
+ /* Find the next rate that is in the rate mask */
+ i = idx + 1;
+ for (mask = (1 << i); i < RATE_COUNT; i++, mask <<= 1) {
+ if (rate_mask & mask) {
+ high = i;
+ break;
+ }
+ }
+
+ return (high << 8) | low;
+ }
+
+ low = idx;
+ while (low != RATE_INVALID) {
+ low = il_rates[low].prev_rs;
+ if (low == RATE_INVALID)
+ break;
+ if (rate_mask & (1 << low))
+ break;
+ D_RATE("Skipping masked lower rate: %d\n", low);
+ }
+
+ high = idx;
+ while (high != RATE_INVALID) {
+ high = il_rates[high].next_rs;
+ if (high == RATE_INVALID)
+ break;
+ if (rate_mask & (1 << high))
+ break;
+ D_RATE("Skipping masked higher rate: %d\n", high);
+ }
+
+ return (high << 8) | low;
+}
+
+static u32
+il4965_rs_get_lower_rate(struct il_lq_sta *lq_sta,
+ struct il_scale_tbl_info *tbl, u8 scale_idx,
+ u8 ht_possible)
+{
+ s32 low;
+ u16 rate_mask;
+ u16 high_low;
+ u8 switch_to_legacy = 0;
+ u8 is_green = lq_sta->is_green;
+ struct il_priv *il = lq_sta->drv;
+
+ /* check if we need to switch from HT to legacy rates.
+ * assumption is that mandatory rates (1Mbps or 6Mbps)
+ * are always supported (spec demand) */
+ if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_idx)) {
+ switch_to_legacy = 1;
+ scale_idx = rs_ht_to_legacy[scale_idx];
+ if (lq_sta->band == NL80211_BAND_5GHZ)
+ tbl->lq_type = LQ_A;
+ else
+ tbl->lq_type = LQ_G;
+
+ if (il4965_num_of_ant(tbl->ant_type) > 1)
+ tbl->ant_type =
+ il4965_first_antenna(il->hw_params.valid_tx_ant);
+
+ tbl->is_ht40 = 0;
+ tbl->is_SGI = 0;
+ tbl->max_search = IL_MAX_SEARCH;
+ }
+
+ rate_mask = il4965_rs_get_supported_rates(lq_sta, NULL, tbl->lq_type);
+
+ /* Mask with station rate restriction */
+ if (is_legacy(tbl->lq_type)) {
+ /* supp_rates has no CCK bits in A mode */
+ if (lq_sta->band == NL80211_BAND_5GHZ)
+ rate_mask =
+ (u16) (rate_mask &
+ (lq_sta->supp_rates << IL_FIRST_OFDM_RATE));
+ else
+ rate_mask = (u16) (rate_mask & lq_sta->supp_rates);
+ }
+
+ /* If we switched from HT to legacy, check current rate */
+ if (switch_to_legacy && (rate_mask & (1 << scale_idx))) {
+ low = scale_idx;
+ goto out;
+ }
+
+ high_low =
+ il4965_rs_get_adjacent_rate(lq_sta->drv, scale_idx, rate_mask,
+ tbl->lq_type);
+ low = high_low & 0xff;
+
+ if (low == RATE_INVALID)
+ low = scale_idx;
+
+out:
+ return il4965_rate_n_flags_from_tbl(lq_sta->drv, tbl, low, is_green);
+}
+
+/*
+ * Simple function to compare two rate scale table types
+ */
+static bool
+il4965_table_type_matches(struct il_scale_tbl_info *a,
+ struct il_scale_tbl_info *b)
+{
+ return (a->lq_type == b->lq_type && a->ant_type == b->ant_type &&
+ a->is_SGI == b->is_SGI);
+}
+
+/*
+ * mac80211 sends us Tx status
+ */
+static void
+il4965_rs_tx_status(void *il_r, struct ieee80211_supported_band *sband,
+ struct ieee80211_sta *sta, void *il_sta,
+ struct sk_buff *skb)
+{
+ int legacy_success;
+ int retries;
+ int rs_idx, mac_idx, i;
+ struct il_lq_sta *lq_sta = il_sta;
+ struct il_link_quality_cmd *table;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ struct il_priv *il = (struct il_priv *)il_r;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ enum mac80211_rate_control_flags mac_flags;
+ u32 tx_rate;
+ struct il_scale_tbl_info tbl_type;
+ struct il_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl;
+
+ D_RATE("get frame ack response, update rate scale win\n");
+
+ /* Treat uninitialized rate scaling data same as non-existing. */
+ if (!lq_sta) {
+ D_RATE("Station rate scaling not created yet.\n");
+ return;
+ } else if (!lq_sta->drv) {
+ D_RATE("Rate scaling not initialized yet.\n");
+ return;
+ }
+
+ if (!ieee80211_is_data(hdr->frame_control) ||
+ (info->flags & IEEE80211_TX_CTL_NO_ACK))
+ return;
+
+ /* This packet was aggregated but doesn't carry status info */
+ if ((info->flags & IEEE80211_TX_CTL_AMPDU) &&
+ !(info->flags & IEEE80211_TX_STAT_AMPDU))
+ return;
+
+ /*
+ * Ignore this Tx frame response if its initial rate doesn't match
+ * that of latest Link Quality command. There may be stragglers
+ * from a previous Link Quality command, but we're no longer interested
+ * in those; they're either from the "active" mode while we're trying
+ * to check "search" mode, or a prior "search" mode after we've moved
+ * to a new "search" mode (which might become the new "active" mode).
+ */
+ table = &lq_sta->lq;
+ tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
+ il4965_rs_get_tbl_info_from_mcs(tx_rate, il->band, &tbl_type, &rs_idx);
+ if (il->band == NL80211_BAND_5GHZ)
+ rs_idx -= IL_FIRST_OFDM_RATE;
+ mac_flags = info->status.rates[0].flags;
+ mac_idx = info->status.rates[0].idx;
+ /* For HT packets, map MCS to PLCP */
+ if (mac_flags & IEEE80211_TX_RC_MCS) {
+ mac_idx &= RATE_MCS_CODE_MSK; /* Remove # of streams */
+ if (mac_idx >= (RATE_9M_IDX - IL_FIRST_OFDM_RATE))
+ mac_idx++;
+ /*
+ * mac80211 HT idx is always zero-idxed; we need to move
+ * HT OFDM rates after CCK rates in 2.4 GHz band
+ */
+ if (il->band == NL80211_BAND_2GHZ)
+ mac_idx += IL_FIRST_OFDM_RATE;
+ }
+ /* Here we actually compare this rate to the latest LQ command */
+ if (mac_idx < 0 ||
+ tbl_type.is_SGI != !!(mac_flags & IEEE80211_TX_RC_SHORT_GI) ||
+ tbl_type.is_ht40 != !!(mac_flags & IEEE80211_TX_RC_40_MHZ_WIDTH) ||
+ tbl_type.is_dup != !!(mac_flags & IEEE80211_TX_RC_DUP_DATA) ||
+ tbl_type.ant_type != info->status.antenna ||
+ !!(tx_rate & RATE_MCS_HT_MSK) != !!(mac_flags & IEEE80211_TX_RC_MCS)
+ || !!(tx_rate & RATE_MCS_GF_MSK) !=
+ !!(mac_flags & IEEE80211_TX_RC_GREEN_FIELD) || rs_idx != mac_idx) {
+ D_RATE("initial rate %d does not match %d (0x%x)\n", mac_idx,
+ rs_idx, tx_rate);
+ /*
+ * Since rates mis-match, the last LQ command may have failed.
+ * After IL_MISSED_RATE_MAX mis-matches, resync the uCode with
+ * ... driver.
+ */
+ lq_sta->missed_rate_counter++;
+ if (lq_sta->missed_rate_counter > IL_MISSED_RATE_MAX) {
+ lq_sta->missed_rate_counter = 0;
+ il_send_lq_cmd(il, &lq_sta->lq, CMD_ASYNC, false);
+ }
+ /* Regardless, ignore this status info for outdated rate */
+ return;
+ } else
+ /* Rate did match, so reset the missed_rate_counter */
+ lq_sta->missed_rate_counter = 0;
+
+ /* Figure out if rate scale algorithm is in active or search table */
+ if (il4965_table_type_matches
+ (&tbl_type, &(lq_sta->lq_info[lq_sta->active_tbl]))) {
+ curr_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+ other_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
+ } else
+ if (il4965_table_type_matches
+ (&tbl_type, &lq_sta->lq_info[1 - lq_sta->active_tbl])) {
+ curr_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
+ other_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+ } else {
+ D_RATE("Neither active nor search matches tx rate\n");
+ tmp_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+ D_RATE("active- lq:%x, ant:%x, SGI:%d\n", tmp_tbl->lq_type,
+ tmp_tbl->ant_type, tmp_tbl->is_SGI);
+ tmp_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
+ D_RATE("search- lq:%x, ant:%x, SGI:%d\n", tmp_tbl->lq_type,
+ tmp_tbl->ant_type, tmp_tbl->is_SGI);
+ D_RATE("actual- lq:%x, ant:%x, SGI:%d\n", tbl_type.lq_type,
+ tbl_type.ant_type, tbl_type.is_SGI);
+ /*
+ * no matching table found, let's by-pass the data collection
+ * and continue to perform rate scale to find the rate table
+ */
+ il4965_rs_stay_in_table(lq_sta, true);
+ goto done;
+ }
+
+ /*
+ * Updating the frame history depends on whether packets were
+ * aggregated.
+ *
+ * For aggregation, all packets were transmitted at the same rate, the
+ * first idx into rate scale table.
+ */
+ if (info->flags & IEEE80211_TX_STAT_AMPDU) {
+ tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
+ il4965_rs_get_tbl_info_from_mcs(tx_rate, il->band, &tbl_type,
+ &rs_idx);
+ il4965_rs_collect_tx_data(curr_tbl, rs_idx,
+ info->status.ampdu_len,
+ info->status.ampdu_ack_len);
+
+ /* Update success/fail counts if not searching for new mode */
+ if (lq_sta->stay_in_tbl) {
+ lq_sta->total_success += info->status.ampdu_ack_len;
+ lq_sta->total_failed +=
+ (info->status.ampdu_len -
+ info->status.ampdu_ack_len);
+ }
+ } else {
+ /*
+ * For legacy, update frame history with for each Tx retry.
+ */
+ retries = info->status.rates[0].count - 1;
+ /* HW doesn't send more than 15 retries */
+ retries = min(retries, 15);
+
+ /* The last transmission may have been successful */
+ legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK);
+ /* Collect data for each rate used during failed TX attempts */
+ for (i = 0; i <= retries; ++i) {
+ tx_rate = le32_to_cpu(table->rs_table[i].rate_n_flags);
+ il4965_rs_get_tbl_info_from_mcs(tx_rate, il->band,
+ &tbl_type, &rs_idx);
+ /*
+ * Only collect stats if retried rate is in the same RS
+ * table as active/search.
+ */
+ if (il4965_table_type_matches(&tbl_type, curr_tbl))
+ tmp_tbl = curr_tbl;
+ else if (il4965_table_type_matches
+ (&tbl_type, other_tbl))
+ tmp_tbl = other_tbl;
+ else
+ continue;
+ il4965_rs_collect_tx_data(tmp_tbl, rs_idx, 1,
+ i <
+ retries ? 0 : legacy_success);
+ }
+
+ /* Update success/fail counts if not searching for new mode */
+ if (lq_sta->stay_in_tbl) {
+ lq_sta->total_success += legacy_success;
+ lq_sta->total_failed += retries + (1 - legacy_success);
+ }
+ }
+ /* The last TX rate is cached in lq_sta; it's set in if/else above */
+ lq_sta->last_rate_n_flags = tx_rate;
+done:
+ /* See if there's a better rate or modulation mode to try. */
+ if (sta->supp_rates[sband->band])
+ il4965_rs_rate_scale_perform(il, skb, sta, lq_sta);
+}
+
+/*
+ * Begin a period of staying with a selected modulation mode.
+ * Set "stay_in_tbl" flag to prevent any mode switches.
+ * Set frame tx success limits according to legacy vs. high-throughput,
+ * and reset overall (spanning all rates) tx success history stats.
+ * These control how long we stay using same modulation mode before
+ * searching for a new mode.
+ */
+static void
+il4965_rs_set_stay_in_table(struct il_priv *il, u8 is_legacy,
+ struct il_lq_sta *lq_sta)
+{
+ D_RATE("we are staying in the same table\n");
+ lq_sta->stay_in_tbl = 1; /* only place this gets set */
+ if (is_legacy) {
+ lq_sta->table_count_limit = IL_LEGACY_TBL_COUNT;
+ lq_sta->max_failure_limit = IL_LEGACY_FAILURE_LIMIT;
+ lq_sta->max_success_limit = IL_LEGACY_SUCCESS_LIMIT;
+ } else {
+ lq_sta->table_count_limit = IL_NONE_LEGACY_TBL_COUNT;
+ lq_sta->max_failure_limit = IL_NONE_LEGACY_FAILURE_LIMIT;
+ lq_sta->max_success_limit = IL_NONE_LEGACY_SUCCESS_LIMIT;
+ }
+ lq_sta->table_count = 0;
+ lq_sta->total_failed = 0;
+ lq_sta->total_success = 0;
+ lq_sta->flush_timer = jiffies;
+ lq_sta->action_counter = 0;
+}
+
+/*
+ * Find correct throughput table for given mode of modulation
+ */
+static void
+il4965_rs_set_expected_tpt_table(struct il_lq_sta *lq_sta,
+ struct il_scale_tbl_info *tbl)
+{
+ /* Used to choose among HT tables */
+ s32(*ht_tbl_pointer)[RATE_COUNT];
+
+ /* Check for invalid LQ type */
+ if (WARN_ON_ONCE(!is_legacy(tbl->lq_type) && !is_Ht(tbl->lq_type))) {
+ tbl->expected_tpt = expected_tpt_legacy;
+ return;
+ }
+
+ /* Legacy rates have only one table */
+ if (is_legacy(tbl->lq_type)) {
+ tbl->expected_tpt = expected_tpt_legacy;
+ return;
+ }
+
+ /* Choose among many HT tables depending on number of streams
+ * (SISO/MIMO2), channel width (20/40), SGI, and aggregation
+ * status */
+ if (is_siso(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
+ ht_tbl_pointer = expected_tpt_siso20MHz;
+ else if (is_siso(tbl->lq_type))
+ ht_tbl_pointer = expected_tpt_siso40MHz;
+ else if (is_mimo2(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
+ ht_tbl_pointer = expected_tpt_mimo2_20MHz;
+ else /* if (is_mimo2(tbl->lq_type)) <-- must be true */
+ ht_tbl_pointer = expected_tpt_mimo2_40MHz;
+
+ if (!tbl->is_SGI && !lq_sta->is_agg) /* Normal */
+ tbl->expected_tpt = ht_tbl_pointer[0];
+ else if (tbl->is_SGI && !lq_sta->is_agg) /* SGI */
+ tbl->expected_tpt = ht_tbl_pointer[1];
+ else if (!tbl->is_SGI && lq_sta->is_agg) /* AGG */
+ tbl->expected_tpt = ht_tbl_pointer[2];
+ else /* AGG+SGI */
+ tbl->expected_tpt = ht_tbl_pointer[3];
+}
+
+/*
+ * Find starting rate for new "search" high-throughput mode of modulation.
+ * Goal is to find lowest expected rate (under perfect conditions) that is
+ * above the current measured throughput of "active" mode, to give new mode
+ * a fair chance to prove itself without too many challenges.
+ *
+ * This gets called when transitioning to more aggressive modulation
+ * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive
+ * (i.e. MIMO to SISO). When moving to MIMO, bit rate will typically need
+ * to decrease to match "active" throughput. When moving from MIMO to SISO,
+ * bit rate will typically need to increase, but not if performance was bad.
+ */
+static s32
+il4965_rs_get_best_rate(struct il_priv *il, struct il_lq_sta *lq_sta,
+ struct il_scale_tbl_info *tbl, /* "search" */
+ u16 rate_mask, s8 idx)
+{
+ /* "active" values */
+ struct il_scale_tbl_info *active_tbl =
+ &(lq_sta->lq_info[lq_sta->active_tbl]);
+ s32 active_sr = active_tbl->win[idx].success_ratio;
+ s32 active_tpt = active_tbl->expected_tpt[idx];
+
+ /* expected "search" throughput */
+ s32 *tpt_tbl = tbl->expected_tpt;
+
+ s32 new_rate, high, low, start_hi;
+ u16 high_low;
+ s8 rate = idx;
+
+ new_rate = high = low = start_hi = RATE_INVALID;
+
+ for (;;) {
+ high_low =
+ il4965_rs_get_adjacent_rate(il, rate, rate_mask,
+ tbl->lq_type);
+
+ low = high_low & 0xff;
+ high = (high_low >> 8) & 0xff;
+
+ /*
+ * Lower the "search" bit rate, to give new "search" mode
+ * approximately the same throughput as "active" if:
+ *
+ * 1) "Active" mode has been working modestly well (but not
+ * great), and expected "search" throughput (under perfect
+ * conditions) at candidate rate is above the actual
+ * measured "active" throughput (but less than expected
+ * "active" throughput under perfect conditions).
+ * OR
+ * 2) "Active" mode has been working perfectly or very well
+ * and expected "search" throughput (under perfect
+ * conditions) at candidate rate is above expected
+ * "active" throughput (under perfect conditions).
+ */
+ if ((100 * tpt_tbl[rate] > lq_sta->last_tpt &&
+ (active_sr > RATE_DECREASE_TH && active_sr <= RATE_HIGH_TH
+ && tpt_tbl[rate] <= active_tpt)) ||
+ (active_sr >= RATE_SCALE_SWITCH &&
+ tpt_tbl[rate] > active_tpt)) {
+
+ /* (2nd or later pass)
+ * If we've already tried to raise the rate, and are
+ * now trying to lower it, use the higher rate. */
+ if (start_hi != RATE_INVALID) {
+ new_rate = start_hi;
+ break;
+ }
+
+ new_rate = rate;
+
+ /* Loop again with lower rate */
+ if (low != RATE_INVALID)
+ rate = low;
+
+ /* Lower rate not available, use the original */
+ else
+ break;
+
+ /* Else try to raise the "search" rate to match "active" */
+ } else {
+ /* (2nd or later pass)
+ * If we've already tried to lower the rate, and are
+ * now trying to raise it, use the lower rate. */
+ if (new_rate != RATE_INVALID)
+ break;
+
+ /* Loop again with higher rate */
+ else if (high != RATE_INVALID) {
+ start_hi = high;
+ rate = high;
+
+ /* Higher rate not available, use the original */
+ } else {
+ new_rate = rate;
+ break;
+ }
+ }
+ }
+
+ return new_rate;
+}
+
+/*
+ * Set up search table for MIMO2
+ */
+static int
+il4965_rs_switch_to_mimo2(struct il_priv *il, struct il_lq_sta *lq_sta,
+ struct ieee80211_conf *conf,
+ struct ieee80211_sta *sta,
+ struct il_scale_tbl_info *tbl, int idx)
+{
+ u16 rate_mask;
+ s32 rate;
+ s8 is_green = lq_sta->is_green;
+
+ if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
+ return -1;
+
+ if (sta->smps_mode == IEEE80211_SMPS_STATIC)
+ return -1;
+
+ /* Need both Tx chains/antennas to support MIMO */
+ if (il->hw_params.tx_chains_num < 2)
+ return -1;
+
+ D_RATE("LQ: try to switch to MIMO2\n");
+
+ tbl->lq_type = LQ_MIMO2;
+ tbl->is_dup = lq_sta->is_dup;
+ tbl->action = 0;
+ tbl->max_search = IL_MAX_SEARCH;
+ rate_mask = lq_sta->active_mimo2_rate;
+
+ if (il_is_ht40_tx_allowed(il, &sta->ht_cap))
+ tbl->is_ht40 = 1;
+ else
+ tbl->is_ht40 = 0;
+
+ il4965_rs_set_expected_tpt_table(lq_sta, tbl);
+
+ rate = il4965_rs_get_best_rate(il, lq_sta, tbl, rate_mask, idx);
+
+ D_RATE("LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask);
+ if (rate == RATE_INVALID || !((1 << rate) & rate_mask)) {
+ D_RATE("Can't switch with idx %d rate mask %x\n", rate,
+ rate_mask);
+ return -1;
+ }
+ tbl->current_rate =
+ il4965_rate_n_flags_from_tbl(il, tbl, rate, is_green);
+
+ D_RATE("LQ: Switch to new mcs %X idx is green %X\n", tbl->current_rate,
+ is_green);
+ return 0;
+}
+
+/*
+ * Set up search table for SISO
+ */
+static int
+il4965_rs_switch_to_siso(struct il_priv *il, struct il_lq_sta *lq_sta,
+ struct ieee80211_conf *conf, struct ieee80211_sta *sta,
+ struct il_scale_tbl_info *tbl, int idx)
+{
+ u16 rate_mask;
+ u8 is_green = lq_sta->is_green;
+ s32 rate;
+
+ if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
+ return -1;
+
+ D_RATE("LQ: try to switch to SISO\n");
+
+ tbl->is_dup = lq_sta->is_dup;
+ tbl->lq_type = LQ_SISO;
+ tbl->action = 0;
+ tbl->max_search = IL_MAX_SEARCH;
+ rate_mask = lq_sta->active_siso_rate;
+
+ if (il_is_ht40_tx_allowed(il, &sta->ht_cap))
+ tbl->is_ht40 = 1;
+ else
+ tbl->is_ht40 = 0;
+
+ if (is_green)
+ tbl->is_SGI = 0; /*11n spec: no SGI in SISO+Greenfield */
+
+ il4965_rs_set_expected_tpt_table(lq_sta, tbl);
+ rate = il4965_rs_get_best_rate(il, lq_sta, tbl, rate_mask, idx);
+
+ D_RATE("LQ: get best rate %d mask %X\n", rate, rate_mask);
+ if (rate == RATE_INVALID || !((1 << rate) & rate_mask)) {
+ D_RATE("can not switch with idx %d rate mask %x\n", rate,
+ rate_mask);
+ return -1;
+ }
+ tbl->current_rate =
+ il4965_rate_n_flags_from_tbl(il, tbl, rate, is_green);
+ D_RATE("LQ: Switch to new mcs %X idx is green %X\n", tbl->current_rate,
+ is_green);
+ return 0;
+}
+
+/*
+ * Try to switch to new modulation mode from legacy
+ */
+static int
+il4965_rs_move_legacy_other(struct il_priv *il, struct il_lq_sta *lq_sta,
+ struct ieee80211_conf *conf,
+ struct ieee80211_sta *sta, int idx)
+{
+ struct il_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+ struct il_scale_tbl_info *search_tbl =
+ &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
+ struct il_rate_scale_data *win = &(tbl->win[idx]);
+ u32 sz =
+ (sizeof(struct il_scale_tbl_info) -
+ (sizeof(struct il_rate_scale_data) * RATE_COUNT));
+ u8 start_action;
+ u8 valid_tx_ant = il->hw_params.valid_tx_ant;
+ u8 tx_chains_num = il->hw_params.tx_chains_num;
+ int ret = 0;
+ u8 update_search_tbl_counter = 0;
+
+ tbl->action = IL_LEGACY_SWITCH_SISO;
+
+ start_action = tbl->action;
+ for (;;) {
+ lq_sta->action_counter++;
+ switch (tbl->action) {
+ case IL_LEGACY_SWITCH_ANTENNA1:
+ case IL_LEGACY_SWITCH_ANTENNA2:
+ D_RATE("LQ: Legacy toggle Antenna\n");
+
+ if ((tbl->action == IL_LEGACY_SWITCH_ANTENNA1 &&
+ tx_chains_num <= 1) ||
+ (tbl->action == IL_LEGACY_SWITCH_ANTENNA2 &&
+ tx_chains_num <= 2))
+ break;
+
+ /* Don't change antenna if success has been great */
+ if (win->success_ratio >= IL_RS_GOOD_RATIO)
+ break;
+
+ /* Set up search table to try other antenna */
+ memcpy(search_tbl, tbl, sz);
+
+ if (il4965_rs_toggle_antenna
+ (valid_tx_ant, &search_tbl->current_rate,
+ search_tbl)) {
+ update_search_tbl_counter = 1;
+ il4965_rs_set_expected_tpt_table(lq_sta,
+ search_tbl);
+ goto out;
+ }
+ break;
+ case IL_LEGACY_SWITCH_SISO:
+ D_RATE("LQ: Legacy switch to SISO\n");
+
+ /* Set up search table to try SISO */
+ memcpy(search_tbl, tbl, sz);
+ search_tbl->is_SGI = 0;
+ ret =
+ il4965_rs_switch_to_siso(il, lq_sta, conf, sta,
+ search_tbl, idx);
+ if (!ret) {
+ lq_sta->action_counter = 0;
+ goto out;
+ }
+
+ break;
+ case IL_LEGACY_SWITCH_MIMO2_AB:
+ case IL_LEGACY_SWITCH_MIMO2_AC:
+ case IL_LEGACY_SWITCH_MIMO2_BC:
+ D_RATE("LQ: Legacy switch to MIMO2\n");
+
+ /* Set up search table to try MIMO */
+ memcpy(search_tbl, tbl, sz);
+ search_tbl->is_SGI = 0;
+
+ if (tbl->action == IL_LEGACY_SWITCH_MIMO2_AB)
+ search_tbl->ant_type = ANT_AB;
+ else if (tbl->action == IL_LEGACY_SWITCH_MIMO2_AC)
+ search_tbl->ant_type = ANT_AC;
+ else
+ search_tbl->ant_type = ANT_BC;
+
+ if (!il4965_rs_is_valid_ant
+ (valid_tx_ant, search_tbl->ant_type))
+ break;
+
+ ret =
+ il4965_rs_switch_to_mimo2(il, lq_sta, conf, sta,
+ search_tbl, idx);
+ if (!ret) {
+ lq_sta->action_counter = 0;
+ goto out;
+ }
+ break;
+ }
+ tbl->action++;
+ if (tbl->action > IL_LEGACY_SWITCH_MIMO2_BC)
+ tbl->action = IL_LEGACY_SWITCH_ANTENNA1;
+
+ if (tbl->action == start_action)
+ break;
+
+ }
+ search_tbl->lq_type = LQ_NONE;
+ return 0;
+
+out:
+ lq_sta->search_better_tbl = 1;
+ tbl->action++;
+ if (tbl->action > IL_LEGACY_SWITCH_MIMO2_BC)
+ tbl->action = IL_LEGACY_SWITCH_ANTENNA1;
+ if (update_search_tbl_counter)
+ search_tbl->action = tbl->action;
+ return 0;
+
+}
+
+/*
+ * Try to switch to new modulation mode from SISO
+ */
+static int
+il4965_rs_move_siso_to_other(struct il_priv *il, struct il_lq_sta *lq_sta,
+ struct ieee80211_conf *conf,
+ struct ieee80211_sta *sta, int idx)
+{
+ u8 is_green = lq_sta->is_green;
+ struct il_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+ struct il_scale_tbl_info *search_tbl =
+ &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
+ struct il_rate_scale_data *win = &(tbl->win[idx]);
+ struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
+ u32 sz =
+ (sizeof(struct il_scale_tbl_info) -
+ (sizeof(struct il_rate_scale_data) * RATE_COUNT));
+ u8 start_action;
+ u8 valid_tx_ant = il->hw_params.valid_tx_ant;
+ u8 tx_chains_num = il->hw_params.tx_chains_num;
+ u8 update_search_tbl_counter = 0;
+ int ret;
+
+ start_action = tbl->action;
+
+ for (;;) {
+ lq_sta->action_counter++;
+ switch (tbl->action) {
+ case IL_SISO_SWITCH_ANTENNA1:
+ case IL_SISO_SWITCH_ANTENNA2:
+ D_RATE("LQ: SISO toggle Antenna\n");
+ if ((tbl->action == IL_SISO_SWITCH_ANTENNA1 &&
+ tx_chains_num <= 1) ||
+ (tbl->action == IL_SISO_SWITCH_ANTENNA2 &&
+ tx_chains_num <= 2))
+ break;
+
+ if (win->success_ratio >= IL_RS_GOOD_RATIO)
+ break;
+
+ memcpy(search_tbl, tbl, sz);
+ if (il4965_rs_toggle_antenna
+ (valid_tx_ant, &search_tbl->current_rate,
+ search_tbl)) {
+ update_search_tbl_counter = 1;
+ goto out;
+ }
+ break;
+ case IL_SISO_SWITCH_MIMO2_AB:
+ case IL_SISO_SWITCH_MIMO2_AC:
+ case IL_SISO_SWITCH_MIMO2_BC:
+ D_RATE("LQ: SISO switch to MIMO2\n");
+ memcpy(search_tbl, tbl, sz);
+ search_tbl->is_SGI = 0;
+
+ if (tbl->action == IL_SISO_SWITCH_MIMO2_AB)
+ search_tbl->ant_type = ANT_AB;
+ else if (tbl->action == IL_SISO_SWITCH_MIMO2_AC)
+ search_tbl->ant_type = ANT_AC;
+ else
+ search_tbl->ant_type = ANT_BC;
+
+ if (!il4965_rs_is_valid_ant
+ (valid_tx_ant, search_tbl->ant_type))
+ break;
+
+ ret =
+ il4965_rs_switch_to_mimo2(il, lq_sta, conf, sta,
+ search_tbl, idx);
+ if (!ret)
+ goto out;
+ break;
+ case IL_SISO_SWITCH_GI:
+ if (!tbl->is_ht40 &&
+ !(ht_cap->cap & IEEE80211_HT_CAP_SGI_20))
+ break;
+ if (tbl->is_ht40 &&
+ !(ht_cap->cap & IEEE80211_HT_CAP_SGI_40))
+ break;
+
+ D_RATE("LQ: SISO toggle SGI/NGI\n");
+
+ memcpy(search_tbl, tbl, sz);
+ if (is_green) {
+ if (!tbl->is_SGI)
+ break;
+ else
+ IL_ERR("SGI was set in GF+SISO\n");
+ }
+ search_tbl->is_SGI = !tbl->is_SGI;
+ il4965_rs_set_expected_tpt_table(lq_sta, search_tbl);
+ if (tbl->is_SGI) {
+ s32 tpt = lq_sta->last_tpt / 100;
+ if (tpt >= search_tbl->expected_tpt[idx])
+ break;
+ }
+ search_tbl->current_rate =
+ il4965_rate_n_flags_from_tbl(il, search_tbl, idx,
+ is_green);
+ update_search_tbl_counter = 1;
+ goto out;
+ }
+ tbl->action++;
+ if (tbl->action > IL_SISO_SWITCH_GI)
+ tbl->action = IL_SISO_SWITCH_ANTENNA1;
+
+ if (tbl->action == start_action)
+ break;
+ }
+ search_tbl->lq_type = LQ_NONE;
+ return 0;
+
+out:
+ lq_sta->search_better_tbl = 1;
+ tbl->action++;
+ if (tbl->action > IL_SISO_SWITCH_GI)
+ tbl->action = IL_SISO_SWITCH_ANTENNA1;
+ if (update_search_tbl_counter)
+ search_tbl->action = tbl->action;
+
+ return 0;
+}
+
+/*
+ * Try to switch to new modulation mode from MIMO2
+ */
+static int
+il4965_rs_move_mimo2_to_other(struct il_priv *il, struct il_lq_sta *lq_sta,
+ struct ieee80211_conf *conf,
+ struct ieee80211_sta *sta, int idx)
+{
+ s8 is_green = lq_sta->is_green;
+ struct il_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+ struct il_scale_tbl_info *search_tbl =
+ &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
+ struct il_rate_scale_data *win = &(tbl->win[idx]);
+ struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
+ u32 sz =
+ (sizeof(struct il_scale_tbl_info) -
+ (sizeof(struct il_rate_scale_data) * RATE_COUNT));
+ u8 start_action;
+ u8 valid_tx_ant = il->hw_params.valid_tx_ant;
+ u8 tx_chains_num = il->hw_params.tx_chains_num;
+ u8 update_search_tbl_counter = 0;
+ int ret;
+
+ start_action = tbl->action;
+ for (;;) {
+ lq_sta->action_counter++;
+ switch (tbl->action) {
+ case IL_MIMO2_SWITCH_ANTENNA1:
+ case IL_MIMO2_SWITCH_ANTENNA2:
+ D_RATE("LQ: MIMO2 toggle Antennas\n");
+
+ if (tx_chains_num <= 2)
+ break;
+
+ if (win->success_ratio >= IL_RS_GOOD_RATIO)
+ break;
+
+ memcpy(search_tbl, tbl, sz);
+ if (il4965_rs_toggle_antenna
+ (valid_tx_ant, &search_tbl->current_rate,
+ search_tbl)) {
+ update_search_tbl_counter = 1;
+ goto out;
+ }
+ break;
+ case IL_MIMO2_SWITCH_SISO_A:
+ case IL_MIMO2_SWITCH_SISO_B:
+ case IL_MIMO2_SWITCH_SISO_C:
+ D_RATE("LQ: MIMO2 switch to SISO\n");
+
+ /* Set up new search table for SISO */
+ memcpy(search_tbl, tbl, sz);
+
+ if (tbl->action == IL_MIMO2_SWITCH_SISO_A)
+ search_tbl->ant_type = ANT_A;
+ else if (tbl->action == IL_MIMO2_SWITCH_SISO_B)
+ search_tbl->ant_type = ANT_B;
+ else
+ search_tbl->ant_type = ANT_C;
+
+ if (!il4965_rs_is_valid_ant
+ (valid_tx_ant, search_tbl->ant_type))
+ break;
+
+ ret =
+ il4965_rs_switch_to_siso(il, lq_sta, conf, sta,
+ search_tbl, idx);
+ if (!ret)
+ goto out;
+
+ break;
+
+ case IL_MIMO2_SWITCH_GI:
+ if (!tbl->is_ht40 &&
+ !(ht_cap->cap & IEEE80211_HT_CAP_SGI_20))
+ break;
+ if (tbl->is_ht40 &&
+ !(ht_cap->cap & IEEE80211_HT_CAP_SGI_40))
+ break;
+
+ D_RATE("LQ: MIMO2 toggle SGI/NGI\n");
+
+ /* Set up new search table for MIMO2 */
+ memcpy(search_tbl, tbl, sz);
+ search_tbl->is_SGI = !tbl->is_SGI;
+ il4965_rs_set_expected_tpt_table(lq_sta, search_tbl);
+ /*
+ * If active table already uses the fastest possible
+ * modulation (dual stream with short guard interval),
+ * and it's working well, there's no need to look
+ * for a better type of modulation!
+ */
+ if (tbl->is_SGI) {
+ s32 tpt = lq_sta->last_tpt / 100;
+ if (tpt >= search_tbl->expected_tpt[idx])
+ break;
+ }
+ search_tbl->current_rate =
+ il4965_rate_n_flags_from_tbl(il, search_tbl, idx,
+ is_green);
+ update_search_tbl_counter = 1;
+ goto out;
+
+ }
+ tbl->action++;
+ if (tbl->action > IL_MIMO2_SWITCH_GI)
+ tbl->action = IL_MIMO2_SWITCH_ANTENNA1;
+
+ if (tbl->action == start_action)
+ break;
+ }
+ search_tbl->lq_type = LQ_NONE;
+ return 0;
+out:
+ lq_sta->search_better_tbl = 1;
+ tbl->action++;
+ if (tbl->action > IL_MIMO2_SWITCH_GI)
+ tbl->action = IL_MIMO2_SWITCH_ANTENNA1;
+ if (update_search_tbl_counter)
+ search_tbl->action = tbl->action;
+
+ return 0;
+
+}
+
+/*
+ * Check whether we should continue using same modulation mode, or
+ * begin search for a new mode, based on:
+ * 1) # tx successes or failures while using this mode
+ * 2) # times calling this function
+ * 3) elapsed time in this mode (not used, for now)
+ */
+static void
+il4965_rs_stay_in_table(struct il_lq_sta *lq_sta, bool force_search)
+{
+ struct il_scale_tbl_info *tbl;
+ int i;
+ int active_tbl;
+ int flush_interval_passed = 0;
+ struct il_priv *il;
+
+ il = lq_sta->drv;
+ active_tbl = lq_sta->active_tbl;
+
+ tbl = &(lq_sta->lq_info[active_tbl]);
+
+ /* If we've been disallowing search, see if we should now allow it */
+ if (lq_sta->stay_in_tbl) {
+
+ /* Elapsed time using current modulation mode */
+ if (lq_sta->flush_timer)
+ flush_interval_passed =
+ time_after(jiffies,
+ (unsigned long)(lq_sta->flush_timer +
+ RATE_SCALE_FLUSH_INTVL));
+
+ /*
+ * Check if we should allow search for new modulation mode.
+ * If many frames have failed or succeeded, or we've used
+ * this same modulation for a long time, allow search, and
+ * reset history stats that keep track of whether we should
+ * allow a new search. Also (below) reset all bitmaps and
+ * stats in active history.
+ */
+ if (force_search ||
+ lq_sta->total_failed > lq_sta->max_failure_limit ||
+ lq_sta->total_success > lq_sta->max_success_limit ||
+ (!lq_sta->search_better_tbl && lq_sta->flush_timer &&
+ flush_interval_passed)) {
+ D_RATE("LQ: stay is expired %d %d %d\n",
+ lq_sta->total_failed, lq_sta->total_success,
+ flush_interval_passed);
+
+ /* Allow search for new mode */
+ lq_sta->stay_in_tbl = 0; /* only place reset */
+ lq_sta->total_failed = 0;
+ lq_sta->total_success = 0;
+ lq_sta->flush_timer = 0;
+
+ /*
+ * Else if we've used this modulation mode enough repetitions
+ * (regardless of elapsed time or success/failure), reset
+ * history bitmaps and rate-specific stats for all rates in
+ * active table.
+ */
+ } else {
+ lq_sta->table_count++;
+ if (lq_sta->table_count >= lq_sta->table_count_limit) {
+ lq_sta->table_count = 0;
+
+ D_RATE("LQ: stay in table clear win\n");
+ for (i = 0; i < RATE_COUNT; i++)
+ il4965_rs_rate_scale_clear_win(&
+ (tbl->
+ win
+ [i]));
+ }
+ }
+
+ /* If transitioning to allow "search", reset all history
+ * bitmaps and stats in active table (this will become the new
+ * "search" table). */
+ if (!lq_sta->stay_in_tbl) {
+ for (i = 0; i < RATE_COUNT; i++)
+ il4965_rs_rate_scale_clear_win(&(tbl->win[i]));
+ }
+ }
+}
+
+/*
+ * setup rate table in uCode
+ */
+static void
+il4965_rs_update_rate_tbl(struct il_priv *il, struct il_lq_sta *lq_sta,
+ struct il_scale_tbl_info *tbl, int idx, u8 is_green)
+{
+ u32 rate;
+
+ /* Update uCode's rate table. */
+ rate = il4965_rate_n_flags_from_tbl(il, tbl, idx, is_green);
+ il4965_rs_fill_link_cmd(il, lq_sta, rate);
+ il_send_lq_cmd(il, &lq_sta->lq, CMD_ASYNC, false);
+}
+
+/*
+ * Do rate scaling and search for new modulation mode.
+ */
+static void
+il4965_rs_rate_scale_perform(struct il_priv *il, struct sk_buff *skb,
+ struct ieee80211_sta *sta,
+ struct il_lq_sta *lq_sta)
+{
+ struct ieee80211_hw *hw = il->hw;
+ struct ieee80211_conf *conf = &hw->conf;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ int low = RATE_INVALID;
+ int high = RATE_INVALID;
+ int idx;
+ int i;
+ struct il_rate_scale_data *win = NULL;
+ int current_tpt = IL_INVALID_VALUE;
+ int low_tpt = IL_INVALID_VALUE;
+ int high_tpt = IL_INVALID_VALUE;
+ u32 fail_count;
+ s8 scale_action = 0;
+ u16 rate_mask;
+ u8 update_lq = 0;
+ struct il_scale_tbl_info *tbl, *tbl1;
+ u16 rate_scale_idx_msk = 0;
+ u8 is_green = 0;
+ u8 active_tbl = 0;
+ u8 done_search = 0;
+ u16 high_low;
+ s32 sr;
+ u8 tid = MAX_TID_COUNT;
+ struct il_tid_data *tid_data;
+
+ D_RATE("rate scale calculate new rate for skb\n");
+
+ /* Send management frames and NO_ACK data using lowest rate. */
+ /* TODO: this could probably be improved.. */
+ if (!ieee80211_is_data(hdr->frame_control) ||
+ (info->flags & IEEE80211_TX_CTL_NO_ACK))
+ return;
+
+ lq_sta->supp_rates = sta->supp_rates[lq_sta->band];
+
+ tid = il4965_rs_tl_add_packet(lq_sta, hdr);
+ if (tid != MAX_TID_COUNT && (lq_sta->tx_agg_tid_en & (1 << tid))) {
+ tid_data = &il->stations[lq_sta->lq.sta_id].tid[tid];
+ if (tid_data->agg.state == IL_AGG_OFF)
+ lq_sta->is_agg = 0;
+ else
+ lq_sta->is_agg = 1;
+ } else
+ lq_sta->is_agg = 0;
+
+ /*
+ * Select rate-scale / modulation-mode table to work with in
+ * the rest of this function: "search" if searching for better
+ * modulation mode, or "active" if doing rate scaling within a mode.
+ */
+ if (!lq_sta->search_better_tbl)
+ active_tbl = lq_sta->active_tbl;
+ else
+ active_tbl = 1 - lq_sta->active_tbl;
+
+ tbl = &(lq_sta->lq_info[active_tbl]);
+ if (is_legacy(tbl->lq_type))
+ lq_sta->is_green = 0;
+ else
+ lq_sta->is_green = il4965_rs_use_green(il, sta);
+ is_green = lq_sta->is_green;
+
+ /* current tx rate */
+ idx = lq_sta->last_txrate_idx;
+
+ D_RATE("Rate scale idx %d for type %d\n", idx, tbl->lq_type);
+
+ /* rates available for this association, and for modulation mode */
+ rate_mask = il4965_rs_get_supported_rates(lq_sta, hdr, tbl->lq_type);
+
+ D_RATE("mask 0x%04X\n", rate_mask);
+
+ /* mask with station rate restriction */
+ if (is_legacy(tbl->lq_type)) {
+ if (lq_sta->band == NL80211_BAND_5GHZ)
+ /* supp_rates has no CCK bits in A mode */
+ rate_scale_idx_msk =
+ (u16) (rate_mask &
+ (lq_sta->supp_rates << IL_FIRST_OFDM_RATE));
+ else
+ rate_scale_idx_msk =
+ (u16) (rate_mask & lq_sta->supp_rates);
+
+ } else
+ rate_scale_idx_msk = rate_mask;
+
+ if (!rate_scale_idx_msk)
+ rate_scale_idx_msk = rate_mask;
+
+ if (!((1 << idx) & rate_scale_idx_msk)) {
+ IL_ERR("Current Rate is not valid\n");
+ if (lq_sta->search_better_tbl) {
+ /* revert to active table if search table is not valid */
+ tbl->lq_type = LQ_NONE;
+ lq_sta->search_better_tbl = 0;
+ tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+ /* get "active" rate info */
+ idx = il4965_hwrate_to_plcp_idx(tbl->current_rate);
+ il4965_rs_update_rate_tbl(il, lq_sta, tbl, idx,
+ is_green);
+ }
+ return;
+ }
+
+ /* Get expected throughput table and history win for current rate */
+ if (!tbl->expected_tpt) {
+ IL_ERR("tbl->expected_tpt is NULL\n");
+ return;
+ }
+
+ /* force user max rate if set by user */
+ if (lq_sta->max_rate_idx != -1 && lq_sta->max_rate_idx < idx) {
+ idx = lq_sta->max_rate_idx;
+ update_lq = 1;
+ win = &(tbl->win[idx]);
+ goto lq_update;
+ }
+
+ win = &(tbl->win[idx]);
+
+ /*
+ * If there is not enough history to calculate actual average
+ * throughput, keep analyzing results of more tx frames, without
+ * changing rate or mode (bypass most of the rest of this function).
+ * Set up new rate table in uCode only if old rate is not supported
+ * in current association (use new rate found above).
+ */
+ fail_count = win->counter - win->success_counter;
+ if (fail_count < RATE_MIN_FAILURE_TH &&
+ win->success_counter < RATE_MIN_SUCCESS_TH) {
+ D_RATE("LQ: still below TH. succ=%d total=%d " "for idx %d\n",
+ win->success_counter, win->counter, idx);
+
+ /* Can't calculate this yet; not enough history */
+ win->average_tpt = IL_INVALID_VALUE;
+
+ /* Should we stay with this modulation mode,
+ * or search for a new one? */
+ il4965_rs_stay_in_table(lq_sta, false);
+
+ goto out;
+ }
+ /* Else we have enough samples; calculate estimate of
+ * actual average throughput */
+ if (win->average_tpt !=
+ ((win->success_ratio * tbl->expected_tpt[idx] + 64) / 128)) {
+ IL_ERR("expected_tpt should have been calculated by now\n");
+ win->average_tpt =
+ ((win->success_ratio * tbl->expected_tpt[idx] + 64) / 128);
+ }
+
+ /* If we are searching for better modulation mode, check success. */
+ if (lq_sta->search_better_tbl) {
+ /* If good success, continue using the "search" mode;
+ * no need to send new link quality command, since we're
+ * continuing to use the setup that we've been trying. */
+ if (win->average_tpt > lq_sta->last_tpt) {
+
+ D_RATE("LQ: SWITCHING TO NEW TBL "
+ "suc=%d cur-tpt=%d old-tpt=%d\n",
+ win->success_ratio, win->average_tpt,
+ lq_sta->last_tpt);
+
+ if (!is_legacy(tbl->lq_type))
+ lq_sta->enable_counter = 1;
+
+ /* Swap tables; "search" becomes "active" */
+ lq_sta->active_tbl = active_tbl;
+ current_tpt = win->average_tpt;
+
+ /* Else poor success; go back to mode in "active" table */
+ } else {
+
+ D_RATE("LQ: GOING BACK TO THE OLD TBL "
+ "suc=%d cur-tpt=%d old-tpt=%d\n",
+ win->success_ratio, win->average_tpt,
+ lq_sta->last_tpt);
+
+ /* Nullify "search" table */
+ tbl->lq_type = LQ_NONE;
+
+ /* Revert to "active" table */
+ active_tbl = lq_sta->active_tbl;
+ tbl = &(lq_sta->lq_info[active_tbl]);
+
+ /* Revert to "active" rate and throughput info */
+ idx = il4965_hwrate_to_plcp_idx(tbl->current_rate);
+ current_tpt = lq_sta->last_tpt;
+
+ /* Need to set up a new rate table in uCode */
+ update_lq = 1;
+ }
+
+ /* Either way, we've made a decision; modulation mode
+ * search is done, allow rate adjustment next time. */
+ lq_sta->search_better_tbl = 0;
+ done_search = 1; /* Don't switch modes below! */
+ goto lq_update;
+ }
+
+ /* (Else) not in search of better modulation mode, try for better
+ * starting rate, while staying in this mode. */
+ high_low =
+ il4965_rs_get_adjacent_rate(il, idx, rate_scale_idx_msk,
+ tbl->lq_type);
+ low = high_low & 0xff;
+ high = (high_low >> 8) & 0xff;
+
+ /* If user set max rate, dont allow higher than user constrain */
+ if (lq_sta->max_rate_idx != -1 && lq_sta->max_rate_idx < high)
+ high = RATE_INVALID;
+
+ sr = win->success_ratio;
+
+ /* Collect measured throughputs for current and adjacent rates */
+ current_tpt = win->average_tpt;
+ if (low != RATE_INVALID)
+ low_tpt = tbl->win[low].average_tpt;
+ if (high != RATE_INVALID)
+ high_tpt = tbl->win[high].average_tpt;
+
+ scale_action = 0;
+
+ /* Too many failures, decrease rate */
+ if (sr <= RATE_DECREASE_TH || current_tpt == 0) {
+ D_RATE("decrease rate because of low success_ratio\n");
+ scale_action = -1;
+
+ /* No throughput measured yet for adjacent rates; try increase. */
+ } else if (low_tpt == IL_INVALID_VALUE && high_tpt == IL_INVALID_VALUE) {
+
+ if (high != RATE_INVALID && sr >= RATE_INCREASE_TH)
+ scale_action = 1;
+ else if (low != RATE_INVALID)
+ scale_action = 0;
+ }
+
+ /* Both adjacent throughputs are measured, but neither one has better
+ * throughput; we're using the best rate, don't change it! */
+ else if (low_tpt != IL_INVALID_VALUE && high_tpt != IL_INVALID_VALUE &&
+ low_tpt < current_tpt && high_tpt < current_tpt)
+ scale_action = 0;
+
+ /* At least one adjacent rate's throughput is measured,
+ * and may have better performance. */
+ else {
+ /* Higher adjacent rate's throughput is measured */
+ if (high_tpt != IL_INVALID_VALUE) {
+ /* Higher rate has better throughput */
+ if (high_tpt > current_tpt && sr >= RATE_INCREASE_TH)
+ scale_action = 1;
+ else
+ scale_action = 0;
+
+ /* Lower adjacent rate's throughput is measured */
+ } else if (low_tpt != IL_INVALID_VALUE) {
+ /* Lower rate has better throughput */
+ if (low_tpt > current_tpt) {
+ D_RATE("decrease rate because of low tpt\n");
+ scale_action = -1;
+ } else if (sr >= RATE_INCREASE_TH) {
+ scale_action = 1;
+ }
+ }
+ }
+
+ /* Sanity check; asked for decrease, but success rate or throughput
+ * has been good at old rate. Don't change it. */
+ if (scale_action == -1 && low != RATE_INVALID &&
+ (sr > RATE_HIGH_TH || current_tpt > 100 * tbl->expected_tpt[low]))
+ scale_action = 0;
+
+ switch (scale_action) {
+ case -1:
+ /* Decrease starting rate, update uCode's rate table */
+ if (low != RATE_INVALID) {
+ update_lq = 1;
+ idx = low;
+ }
+
+ break;
+ case 1:
+ /* Increase starting rate, update uCode's rate table */
+ if (high != RATE_INVALID) {
+ update_lq = 1;
+ idx = high;
+ }
+
+ break;
+ case 0:
+ /* No change */
+ default:
+ break;
+ }
+
+ D_RATE("choose rate scale idx %d action %d low %d " "high %d type %d\n",
+ idx, scale_action, low, high, tbl->lq_type);
+
+lq_update:
+ /* Replace uCode's rate table for the destination station. */
+ if (update_lq)
+ il4965_rs_update_rate_tbl(il, lq_sta, tbl, idx, is_green);
+
+ /* Should we stay with this modulation mode,
+ * or search for a new one? */
+ il4965_rs_stay_in_table(lq_sta, false);
+
+ /*
+ * Search for new modulation mode if we're:
+ * 1) Not changing rates right now
+ * 2) Not just finishing up a search
+ * 3) Allowing a new search
+ */
+ if (!update_lq && !done_search && !lq_sta->stay_in_tbl && win->counter) {
+ /* Save current throughput to compare with "search" throughput */
+ lq_sta->last_tpt = current_tpt;
+
+ /* Select a new "search" modulation mode to try.
+ * If one is found, set up the new "search" table. */
+ if (is_legacy(tbl->lq_type))
+ il4965_rs_move_legacy_other(il, lq_sta, conf, sta, idx);
+ else if (is_siso(tbl->lq_type))
+ il4965_rs_move_siso_to_other(il, lq_sta, conf, sta,
+ idx);
+ else /* (is_mimo2(tbl->lq_type)) */
+ il4965_rs_move_mimo2_to_other(il, lq_sta, conf, sta,
+ idx);
+
+ /* If new "search" mode was selected, set up in uCode table */
+ if (lq_sta->search_better_tbl) {
+ /* Access the "search" table, clear its history. */
+ tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
+ for (i = 0; i < RATE_COUNT; i++)
+ il4965_rs_rate_scale_clear_win(&(tbl->win[i]));
+
+ /* Use new "search" start rate */
+ idx = il4965_hwrate_to_plcp_idx(tbl->current_rate);
+
+ D_RATE("Switch current mcs: %X idx: %d\n",
+ tbl->current_rate, idx);
+ il4965_rs_fill_link_cmd(il, lq_sta, tbl->current_rate);
+ il_send_lq_cmd(il, &lq_sta->lq, CMD_ASYNC, false);
+ } else
+ done_search = 1;
+ }
+
+ if (done_search && !lq_sta->stay_in_tbl) {
+ /* If the "active" (non-search) mode was legacy,
+ * and we've tried switching antennas,
+ * but we haven't been able to try HT modes (not available),
+ * stay with best antenna legacy modulation for a while
+ * before next round of mode comparisons. */
+ tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]);
+ if (is_legacy(tbl1->lq_type) && !conf_is_ht(conf) &&
+ lq_sta->action_counter > tbl1->max_search) {
+ D_RATE("LQ: STAY in legacy table\n");
+ il4965_rs_set_stay_in_table(il, 1, lq_sta);
+ }
+
+ /* If we're in an HT mode, and all 3 mode switch actions
+ * have been tried and compared, stay in this best modulation
+ * mode for a while before next round of mode comparisons. */
+ if (lq_sta->enable_counter &&
+ lq_sta->action_counter >= tbl1->max_search) {
+ if (lq_sta->last_tpt > IL_AGG_TPT_THREHOLD &&
+ (lq_sta->tx_agg_tid_en & (1 << tid)) &&
+ tid != MAX_TID_COUNT) {
+ tid_data =
+ &il->stations[lq_sta->lq.sta_id].tid[tid];
+ if (tid_data->agg.state == IL_AGG_OFF) {
+ D_RATE("try to aggregate tid %d\n",
+ tid);
+ il4965_rs_tl_turn_on_agg(il, tid,
+ lq_sta, sta);
+ }
+ }
+ il4965_rs_set_stay_in_table(il, 0, lq_sta);
+ }
+ }
+
+out:
+ tbl->current_rate =
+ il4965_rate_n_flags_from_tbl(il, tbl, idx, is_green);
+ i = idx;
+ lq_sta->last_txrate_idx = i;
+}
+
+/**
+ * il4965_rs_initialize_lq - Initialize a station's hardware rate table
+ *
+ * The uCode's station table contains a table of fallback rates
+ * for automatic fallback during transmission.
+ *
+ * NOTE: This sets up a default set of values. These will be replaced later
+ * if the driver's iwl-4965-rs rate scaling algorithm is used, instead of
+ * rc80211_simple.
+ *
+ * NOTE: Run C_ADD_STA command to set up station table entry, before
+ * calling this function (which runs C_TX_LINK_QUALITY_CMD,
+ * which requires station table entry to exist).
+ */
+static void
+il4965_rs_initialize_lq(struct il_priv *il, struct ieee80211_conf *conf,
+ struct ieee80211_sta *sta, struct il_lq_sta *lq_sta)
+{
+ struct il_scale_tbl_info *tbl;
+ int rate_idx;
+ int i;
+ u32 rate;
+ u8 use_green;
+ u8 active_tbl = 0;
+ u8 valid_tx_ant;
+ struct il_station_priv *sta_priv;
+
+ if (!sta || !lq_sta)
+ return;
+
+ use_green = il4965_rs_use_green(il, sta);
+ sta_priv = (void *)sta->drv_priv;
+
+ i = lq_sta->last_txrate_idx;
+
+ valid_tx_ant = il->hw_params.valid_tx_ant;
+
+ if (!lq_sta->search_better_tbl)
+ active_tbl = lq_sta->active_tbl;
+ else
+ active_tbl = 1 - lq_sta->active_tbl;
+
+ tbl = &(lq_sta->lq_info[active_tbl]);
+
+ if (i < 0 || i >= RATE_COUNT)
+ i = 0;
+
+ rate = il_rates[i].plcp;
+ tbl->ant_type = il4965_first_antenna(valid_tx_ant);
+ rate |= tbl->ant_type << RATE_MCS_ANT_POS;
+
+ if (i >= IL_FIRST_CCK_RATE && i <= IL_LAST_CCK_RATE)
+ rate |= RATE_MCS_CCK_MSK;
+
+ il4965_rs_get_tbl_info_from_mcs(rate, il->band, tbl, &rate_idx);
+ if (!il4965_rs_is_valid_ant(valid_tx_ant, tbl->ant_type))
+ il4965_rs_toggle_antenna(valid_tx_ant, &rate, tbl);
+
+ rate = il4965_rate_n_flags_from_tbl(il, tbl, rate_idx, use_green);
+ tbl->current_rate = rate;
+ il4965_rs_set_expected_tpt_table(lq_sta, tbl);
+ il4965_rs_fill_link_cmd(NULL, lq_sta, rate);
+ il->stations[lq_sta->lq.sta_id].lq = &lq_sta->lq;
+ il_send_lq_cmd(il, &lq_sta->lq, CMD_SYNC, true);
+}
+
+static void
+il4965_rs_get_rate(void *il_r, struct ieee80211_sta *sta, void *il_sta,
+ struct ieee80211_tx_rate_control *txrc)
+{
+
+ struct sk_buff *skb = txrc->skb;
+ struct ieee80211_supported_band *sband = txrc->sband;
+ struct il_priv *il __maybe_unused = (struct il_priv *)il_r;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct il_lq_sta *lq_sta = il_sta;
+ int rate_idx;
+
+ D_RATE("rate scale calculate new rate for skb\n");
+
+ /* Get max rate if user set max rate */
+ if (lq_sta) {
+ lq_sta->max_rate_idx = txrc->max_rate_idx;
+ if (sband->band == NL80211_BAND_5GHZ &&
+ lq_sta->max_rate_idx != -1)
+ lq_sta->max_rate_idx += IL_FIRST_OFDM_RATE;
+ if (lq_sta->max_rate_idx < 0 ||
+ lq_sta->max_rate_idx >= RATE_COUNT)
+ lq_sta->max_rate_idx = -1;
+ }
+
+ /* Treat uninitialized rate scaling data same as non-existing. */
+ if (lq_sta && !lq_sta->drv) {
+ D_RATE("Rate scaling not initialized yet.\n");
+ il_sta = NULL;
+ }
+
+ /* Send management frames and NO_ACK data using lowest rate. */
+ if (rate_control_send_low(sta, il_sta, txrc))
+ return;
+
+ if (!lq_sta)
+ return;
+
+ rate_idx = lq_sta->last_txrate_idx;
+
+ if (lq_sta->last_rate_n_flags & RATE_MCS_HT_MSK) {
+ rate_idx -= IL_FIRST_OFDM_RATE;
+ /* 6M and 9M shared same MCS idx */
+ rate_idx = (rate_idx > 0) ? (rate_idx - 1) : 0;
+ if (il4965_rs_extract_rate(lq_sta->last_rate_n_flags) >=
+ RATE_MIMO2_6M_PLCP)
+ rate_idx = rate_idx + MCS_IDX_PER_STREAM;
+ info->control.rates[0].flags = IEEE80211_TX_RC_MCS;
+ if (lq_sta->last_rate_n_flags & RATE_MCS_SGI_MSK)
+ info->control.rates[0].flags |=
+ IEEE80211_TX_RC_SHORT_GI;
+ if (lq_sta->last_rate_n_flags & RATE_MCS_DUP_MSK)
+ info->control.rates[0].flags |=
+ IEEE80211_TX_RC_DUP_DATA;
+ if (lq_sta->last_rate_n_flags & RATE_MCS_HT40_MSK)
+ info->control.rates[0].flags |=
+ IEEE80211_TX_RC_40_MHZ_WIDTH;
+ if (lq_sta->last_rate_n_flags & RATE_MCS_GF_MSK)
+ info->control.rates[0].flags |=
+ IEEE80211_TX_RC_GREEN_FIELD;
+ } else {
+ /* Check for invalid rates */
+ if (rate_idx < 0 || rate_idx >= RATE_COUNT_LEGACY ||
+ (sband->band == NL80211_BAND_5GHZ &&
+ rate_idx < IL_FIRST_OFDM_RATE))
+ rate_idx = rate_lowest_index(sband, sta);
+ /* On valid 5 GHz rate, adjust idx */
+ else if (sband->band == NL80211_BAND_5GHZ)
+ rate_idx -= IL_FIRST_OFDM_RATE;
+ info->control.rates[0].flags = 0;
+ }
+ info->control.rates[0].idx = rate_idx;
+ info->control.rates[0].count = 1;
+}
+
+static void *
+il4965_rs_alloc_sta(void *il_rate, struct ieee80211_sta *sta, gfp_t gfp)
+{
+ struct il_station_priv *sta_priv =
+ (struct il_station_priv *)sta->drv_priv;
+ struct il_priv *il;
+
+ il = (struct il_priv *)il_rate;
+ D_RATE("create station rate scale win\n");
+
+ return &sta_priv->lq_sta;
+}
+
+/*
+ * Called after adding a new station to initialize rate scaling
+ */
+void
+il4965_rs_rate_init(struct il_priv *il, struct ieee80211_sta *sta, u8 sta_id)
+{
+ int i, j;
+ struct ieee80211_hw *hw = il->hw;
+ struct ieee80211_conf *conf = &il->hw->conf;
+ struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
+ struct il_station_priv *sta_priv;
+ struct il_lq_sta *lq_sta;
+ struct ieee80211_supported_band *sband;
+
+ sta_priv = (struct il_station_priv *)sta->drv_priv;
+ lq_sta = &sta_priv->lq_sta;
+ sband = hw->wiphy->bands[conf->chandef.chan->band];
+
+ lq_sta->lq.sta_id = sta_id;
+
+ for (j = 0; j < LQ_SIZE; j++)
+ for (i = 0; i < RATE_COUNT; i++)
+ il4965_rs_rate_scale_clear_win(&lq_sta->lq_info[j].
+ win[i]);
+
+ lq_sta->flush_timer = 0;
+ lq_sta->supp_rates = sta->supp_rates[sband->band];
+ for (j = 0; j < LQ_SIZE; j++)
+ for (i = 0; i < RATE_COUNT; i++)
+ il4965_rs_rate_scale_clear_win(&lq_sta->lq_info[j].
+ win[i]);
+
+ D_RATE("LQ:" "*** rate scale station global init for station %d ***\n",
+ sta_id);
+ /* TODO: what is a good starting rate for STA? About middle? Maybe not
+ * the lowest or the highest rate.. Could consider using RSSI from
+ * previous packets? Need to have IEEE 802.1X auth succeed immediately
+ * after assoc.. */
+
+ lq_sta->is_dup = 0;
+ lq_sta->max_rate_idx = -1;
+ lq_sta->missed_rate_counter = IL_MISSED_RATE_MAX;
+ lq_sta->is_green = il4965_rs_use_green(il, sta);
+ lq_sta->active_legacy_rate = il->active_rate & ~(0x1000);
+ lq_sta->band = il->band;
+ /*
+ * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3),
+ * supp_rates[] does not; shift to convert format, force 9 MBits off.
+ */
+ lq_sta->active_siso_rate = ht_cap->mcs.rx_mask[0] << 1;
+ lq_sta->active_siso_rate |= ht_cap->mcs.rx_mask[0] & 0x1;
+ lq_sta->active_siso_rate &= ~((u16) 0x2);
+ lq_sta->active_siso_rate <<= IL_FIRST_OFDM_RATE;
+
+ /* Same here */
+ lq_sta->active_mimo2_rate = ht_cap->mcs.rx_mask[1] << 1;
+ lq_sta->active_mimo2_rate |= ht_cap->mcs.rx_mask[1] & 0x1;
+ lq_sta->active_mimo2_rate &= ~((u16) 0x2);
+ lq_sta->active_mimo2_rate <<= IL_FIRST_OFDM_RATE;
+
+ /* These values will be overridden later */
+ lq_sta->lq.general_params.single_stream_ant_msk =
+ il4965_first_antenna(il->hw_params.valid_tx_ant);
+ lq_sta->lq.general_params.dual_stream_ant_msk =
+ il->hw_params.valid_tx_ant & ~il4965_first_antenna(il->hw_params.
+ valid_tx_ant);
+ if (!lq_sta->lq.general_params.dual_stream_ant_msk) {
+ lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB;
+ } else if (il4965_num_of_ant(il->hw_params.valid_tx_ant) == 2) {
+ lq_sta->lq.general_params.dual_stream_ant_msk =
+ il->hw_params.valid_tx_ant;
+ }
+
+ /* as default allow aggregation for all tids */
+ lq_sta->tx_agg_tid_en = IL_AGG_ALL_TID;
+ lq_sta->drv = il;
+
+ /* Set last_txrate_idx to lowest rate */
+ lq_sta->last_txrate_idx = rate_lowest_index(sband, sta);
+ if (sband->band == NL80211_BAND_5GHZ)
+ lq_sta->last_txrate_idx += IL_FIRST_OFDM_RATE;
+ lq_sta->is_agg = 0;
+
+#ifdef CPTCFG_MAC80211_DEBUGFS
+ lq_sta->dbg_fixed_rate = 0;
+#endif
+
+ il4965_rs_initialize_lq(il, conf, sta, lq_sta);
+}
+
+static void
+il4965_rs_fill_link_cmd(struct il_priv *il, struct il_lq_sta *lq_sta,
+ u32 new_rate)
+{
+ struct il_scale_tbl_info tbl_type;
+ int idx = 0;
+ int rate_idx;
+ int repeat_rate = 0;
+ u8 ant_toggle_cnt = 0;
+ u8 use_ht_possible = 1;
+ u8 valid_tx_ant = 0;
+ struct il_link_quality_cmd *lq_cmd = &lq_sta->lq;
+
+ /* Override starting rate (idx 0) if needed for debug purposes */
+ il4965_rs_dbgfs_set_mcs(lq_sta, &new_rate, idx);
+
+ /* Interpret new_rate (rate_n_flags) */
+ il4965_rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type,
+ &rate_idx);
+
+ /* How many times should we repeat the initial rate? */
+ if (is_legacy(tbl_type.lq_type)) {
+ ant_toggle_cnt = 1;
+ repeat_rate = IL_NUMBER_TRY;
+ } else {
+ repeat_rate = IL_HT_NUMBER_TRY;
+ }
+
+ lq_cmd->general_params.mimo_delimiter =
+ is_mimo(tbl_type.lq_type) ? 1 : 0;
+
+ /* Fill 1st table entry (idx 0) */
+ lq_cmd->rs_table[idx].rate_n_flags = cpu_to_le32(new_rate);
+
+ if (il4965_num_of_ant(tbl_type.ant_type) == 1) {
+ lq_cmd->general_params.single_stream_ant_msk =
+ tbl_type.ant_type;
+ } else if (il4965_num_of_ant(tbl_type.ant_type) == 2) {
+ lq_cmd->general_params.dual_stream_ant_msk = tbl_type.ant_type;
+ }
+ /* otherwise we don't modify the existing value */
+ idx++;
+ repeat_rate--;
+ if (il)
+ valid_tx_ant = il->hw_params.valid_tx_ant;
+
+ /* Fill rest of rate table */
+ while (idx < LINK_QUAL_MAX_RETRY_NUM) {
+ /* Repeat initial/next rate.
+ * For legacy IL_NUMBER_TRY == 1, this loop will not execute.
+ * For HT IL_HT_NUMBER_TRY == 3, this executes twice. */
+ while (repeat_rate > 0 && idx < LINK_QUAL_MAX_RETRY_NUM) {
+ if (is_legacy(tbl_type.lq_type)) {
+ if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
+ ant_toggle_cnt++;
+ else if (il &&
+ il4965_rs_toggle_antenna(valid_tx_ant,
+ &new_rate,
+ &tbl_type))
+ ant_toggle_cnt = 1;
+ }
+
+ /* Override next rate if needed for debug purposes */
+ il4965_rs_dbgfs_set_mcs(lq_sta, &new_rate, idx);
+
+ /* Fill next table entry */
+ lq_cmd->rs_table[idx].rate_n_flags =
+ cpu_to_le32(new_rate);
+ repeat_rate--;
+ idx++;
+ }
+
+ il4965_rs_get_tbl_info_from_mcs(new_rate, lq_sta->band,
+ &tbl_type, &rate_idx);
+
+ /* Indicate to uCode which entries might be MIMO.
+ * If initial rate was MIMO, this will finally end up
+ * as (IL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */
+ if (is_mimo(tbl_type.lq_type))
+ lq_cmd->general_params.mimo_delimiter = idx;
+
+ /* Get next rate */
+ new_rate =
+ il4965_rs_get_lower_rate(lq_sta, &tbl_type, rate_idx,
+ use_ht_possible);
+
+ /* How many times should we repeat the next rate? */
+ if (is_legacy(tbl_type.lq_type)) {
+ if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
+ ant_toggle_cnt++;
+ else if (il &&
+ il4965_rs_toggle_antenna(valid_tx_ant,
+ &new_rate, &tbl_type))
+ ant_toggle_cnt = 1;
+
+ repeat_rate = IL_NUMBER_TRY;
+ } else {
+ repeat_rate = IL_HT_NUMBER_TRY;
+ }
+
+ /* Don't allow HT rates after next pass.
+ * il4965_rs_get_lower_rate() will change type to LQ_A or LQ_G. */
+ use_ht_possible = 0;
+
+ /* Override next rate if needed for debug purposes */
+ il4965_rs_dbgfs_set_mcs(lq_sta, &new_rate, idx);
+
+ /* Fill next table entry */
+ lq_cmd->rs_table[idx].rate_n_flags = cpu_to_le32(new_rate);
+
+ idx++;
+ repeat_rate--;
+ }
+
+ lq_cmd->agg_params.agg_frame_cnt_limit = LINK_QUAL_AGG_FRAME_LIMIT_DEF;
+ lq_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
+
+ lq_cmd->agg_params.agg_time_limit =
+ cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
+}
+
+static void *
+il4965_rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
+{
+ return hw->priv;
+}
+
+/* rate scale requires free function to be implemented */
+static void
+il4965_rs_free(void *il_rate)
+{
+ return;
+}
+
+static void
+il4965_rs_free_sta(void *il_r, struct ieee80211_sta *sta, void *il_sta)
+{
+ struct il_priv *il __maybe_unused = il_r;
+
+ D_RATE("enter\n");
+ D_RATE("leave\n");
+}
+
+#ifdef CPTCFG_MAC80211_DEBUGFS
+
+static void
+il4965_rs_dbgfs_set_mcs(struct il_lq_sta *lq_sta, u32 * rate_n_flags, int idx)
+{
+ struct il_priv *il;
+ u8 valid_tx_ant;
+ u8 ant_sel_tx;
+
+ il = lq_sta->drv;
+ valid_tx_ant = il->hw_params.valid_tx_ant;
+ if (lq_sta->dbg_fixed_rate) {
+ ant_sel_tx =
+ ((lq_sta->
+ dbg_fixed_rate & RATE_MCS_ANT_ABC_MSK) >>
+ RATE_MCS_ANT_POS);
+ if ((valid_tx_ant & ant_sel_tx) == ant_sel_tx) {
+ *rate_n_flags = lq_sta->dbg_fixed_rate;
+ D_RATE("Fixed rate ON\n");
+ } else {
+ lq_sta->dbg_fixed_rate = 0;
+ IL_ERR
+ ("Invalid antenna selection 0x%X, Valid is 0x%X\n",
+ ant_sel_tx, valid_tx_ant);
+ D_RATE("Fixed rate OFF\n");
+ }
+ } else {
+ D_RATE("Fixed rate OFF\n");
+ }
+}
+
+static ssize_t
+il4965_rs_sta_dbgfs_scale_table_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct il_lq_sta *lq_sta = file->private_data;
+ struct il_priv *il;
+ char buf[64];
+ size_t buf_size;
+ u32 parsed_rate;
+
+ il = lq_sta->drv;
+ memset(buf, 0, sizeof(buf));
+ buf_size = min(count, sizeof(buf) - 1);
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+
+ if (sscanf(buf, "%x", &parsed_rate) == 1)
+ lq_sta->dbg_fixed_rate = parsed_rate;
+ else
+ lq_sta->dbg_fixed_rate = 0;
+
+ lq_sta->active_legacy_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */
+ lq_sta->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
+ lq_sta->active_mimo2_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
+
+ D_RATE("sta_id %d rate 0x%X\n", lq_sta->lq.sta_id,
+ lq_sta->dbg_fixed_rate);
+
+ if (lq_sta->dbg_fixed_rate) {
+ il4965_rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate);
+ il_send_lq_cmd(lq_sta->drv, &lq_sta->lq, CMD_ASYNC, false);
+ }
+
+ return count;
+}
+
+static ssize_t
+il4965_rs_sta_dbgfs_scale_table_read(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ char *buff;
+ int desc = 0;
+ int i = 0;
+ int idx = 0;
+ ssize_t ret;
+
+ struct il_lq_sta *lq_sta = file->private_data;
+ struct il_priv *il;
+ struct il_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+
+ il = lq_sta->drv;
+ buff = kmalloc(1024, GFP_KERNEL);
+ if (!buff)
+ return -ENOMEM;
+
+ desc += sprintf(buff + desc, "sta_id %d\n", lq_sta->lq.sta_id);
+ desc +=
+ sprintf(buff + desc, "failed=%d success=%d rate=0%X\n",
+ lq_sta->total_failed, lq_sta->total_success,
+ lq_sta->active_legacy_rate);
+ desc +=
+ sprintf(buff + desc, "fixed rate 0x%X\n", lq_sta->dbg_fixed_rate);
+ desc +=
+ sprintf(buff + desc, "valid_tx_ant %s%s%s\n",
+ (il->hw_params.valid_tx_ant & ANT_A) ? "ANT_A," : "",
+ (il->hw_params.valid_tx_ant & ANT_B) ? "ANT_B," : "",
+ (il->hw_params.valid_tx_ant & ANT_C) ? "ANT_C" : "");
+ desc +=
+ sprintf(buff + desc, "lq type %s\n",
+ (is_legacy(tbl->lq_type)) ? "legacy" : "HT");
+ if (is_Ht(tbl->lq_type)) {
+ desc +=
+ sprintf(buff + desc, " %s",
+ (is_siso(tbl->lq_type)) ? "SISO" : "MIMO2");
+ desc +=
+ sprintf(buff + desc, " %s",
+ (tbl->is_ht40) ? "40MHz" : "20MHz");
+ desc +=
+ sprintf(buff + desc, " %s %s %s\n",
+ (tbl->is_SGI) ? "SGI" : "",
+ (lq_sta->is_green) ? "GF enabled" : "",
+ (lq_sta->is_agg) ? "AGG on" : "");
+ }
+ desc +=
+ sprintf(buff + desc, "last tx rate=0x%X\n",
+ lq_sta->last_rate_n_flags);
+ desc +=
+ sprintf(buff + desc,
+ "general:" "flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n",
+ lq_sta->lq.general_params.flags,
+ lq_sta->lq.general_params.mimo_delimiter,
+ lq_sta->lq.general_params.single_stream_ant_msk,
+ lq_sta->lq.general_params.dual_stream_ant_msk);
+
+ desc +=
+ sprintf(buff + desc,
+ "agg:"
+ "time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n",
+ le16_to_cpu(lq_sta->lq.agg_params.agg_time_limit),
+ lq_sta->lq.agg_params.agg_dis_start_th,
+ lq_sta->lq.agg_params.agg_frame_cnt_limit);
+
+ desc +=
+ sprintf(buff + desc,
+ "Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n",
+ lq_sta->lq.general_params.start_rate_idx[0],
+ lq_sta->lq.general_params.start_rate_idx[1],
+ lq_sta->lq.general_params.start_rate_idx[2],
+ lq_sta->lq.general_params.start_rate_idx[3]);
+
+ for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) {
+ idx =
+ il4965_hwrate_to_plcp_idx(le32_to_cpu
+ (lq_sta->lq.rs_table[i].
+ rate_n_flags));
+ if (is_legacy(tbl->lq_type)) {
+ desc +=
+ sprintf(buff + desc, " rate[%d] 0x%X %smbps\n", i,
+ le32_to_cpu(lq_sta->lq.rs_table[i].
+ rate_n_flags),
+ il_rate_mcs[idx].mbps);
+ } else {
+ desc +=
+ sprintf(buff + desc, " rate[%d] 0x%X %smbps (%s)\n",
+ i,
+ le32_to_cpu(lq_sta->lq.rs_table[i].
+ rate_n_flags),
+ il_rate_mcs[idx].mbps,
+ il_rate_mcs[idx].mcs);
+ }
+ }
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
+ kfree(buff);
+ return ret;
+}
+
+static const struct file_operations rs_sta_dbgfs_scale_table_ops = {
+ .write = il4965_rs_sta_dbgfs_scale_table_write,
+ .read = il4965_rs_sta_dbgfs_scale_table_read,
+ .open = simple_open,
+ .llseek = default_llseek,
+};
+
+static ssize_t
+il4965_rs_sta_dbgfs_stats_table_read(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ char *buff;
+ int desc = 0;
+ int i, j;
+ ssize_t ret;
+
+ struct il_lq_sta *lq_sta = file->private_data;
+
+ buff = kmalloc(1024, GFP_KERNEL);
+ if (!buff)
+ return -ENOMEM;
+
+ for (i = 0; i < LQ_SIZE; i++) {
+ desc +=
+ sprintf(buff + desc,
+ "%s type=%d SGI=%d HT40=%d DUP=%d GF=%d\n"
+ "rate=0x%X\n", lq_sta->active_tbl == i ? "*" : "x",
+ lq_sta->lq_info[i].lq_type,
+ lq_sta->lq_info[i].is_SGI,
+ lq_sta->lq_info[i].is_ht40,
+ lq_sta->lq_info[i].is_dup, lq_sta->is_green,
+ lq_sta->lq_info[i].current_rate);
+ for (j = 0; j < RATE_COUNT; j++) {
+ desc +=
+ sprintf(buff + desc,
+ "counter=%d success=%d %%=%d\n",
+ lq_sta->lq_info[i].win[j].counter,
+ lq_sta->lq_info[i].win[j].success_counter,
+ lq_sta->lq_info[i].win[j].success_ratio);
+ }
+ }
+ ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
+ kfree(buff);
+ return ret;
+}
+
+static const struct file_operations rs_sta_dbgfs_stats_table_ops = {
+ .read = il4965_rs_sta_dbgfs_stats_table_read,
+ .open = simple_open,
+ .llseek = default_llseek,
+};
+
+static ssize_t
+il4965_rs_sta_dbgfs_rate_scale_data_read(struct file *file,
+ char __user *user_buf, size_t count,
+ loff_t *ppos)
+{
+ char buff[120];
+ int desc = 0;
+ struct il_lq_sta *lq_sta = file->private_data;
+ struct il_scale_tbl_info *tbl = &lq_sta->lq_info[lq_sta->active_tbl];
+
+ if (is_Ht(tbl->lq_type))
+ desc +=
+ sprintf(buff + desc, "Bit Rate= %d Mb/s\n",
+ tbl->expected_tpt[lq_sta->last_txrate_idx]);
+ else
+ desc +=
+ sprintf(buff + desc, "Bit Rate= %d Mb/s\n",
+ il_rates[lq_sta->last_txrate_idx].ieee >> 1);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buff, desc);
+}
+
+static const struct file_operations rs_sta_dbgfs_rate_scale_data_ops = {
+ .read = il4965_rs_sta_dbgfs_rate_scale_data_read,
+ .open = simple_open,
+ .llseek = default_llseek,
+};
+
+static void
+il4965_rs_add_debugfs(void *il, void *il_sta, struct dentry *dir)
+{
+ struct il_lq_sta *lq_sta = il_sta;
+ lq_sta->rs_sta_dbgfs_scale_table_file =
+ debugfs_create_file("rate_scale_table", S_IRUSR | S_IWUSR, dir,
+ lq_sta, &rs_sta_dbgfs_scale_table_ops);
+ lq_sta->rs_sta_dbgfs_stats_table_file =
+ debugfs_create_file("rate_stats_table", S_IRUSR, dir, lq_sta,
+ &rs_sta_dbgfs_stats_table_ops);
+ lq_sta->rs_sta_dbgfs_rate_scale_data_file =
+ debugfs_create_file("rate_scale_data", S_IRUSR, dir, lq_sta,
+ &rs_sta_dbgfs_rate_scale_data_ops);
+ lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file =
+ debugfs_create_u8("tx_agg_tid_enable", S_IRUSR | S_IWUSR, dir,
+ &lq_sta->tx_agg_tid_en);
+
+}
+
+static void
+il4965_rs_remove_debugfs(void *il, void *il_sta)
+{
+ struct il_lq_sta *lq_sta = il_sta;
+ debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file);
+ debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file);
+ debugfs_remove(lq_sta->rs_sta_dbgfs_rate_scale_data_file);
+ debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file);
+}
+#endif
+
+/*
+ * Initialization of rate scaling information is done by driver after
+ * the station is added. Since mac80211 calls this function before a
+ * station is added we ignore it.
+ */
+static void
+il4965_rs_rate_init_stub(void *il_r, struct ieee80211_supported_band *sband,
+ struct cfg80211_chan_def *chandef,
+ struct ieee80211_sta *sta, void *il_sta)
+{
+}
+
+static const struct rate_control_ops rs_4965_ops = {
+ .name = IL4965_RS_NAME,
+ .tx_status = il4965_rs_tx_status,
+ .get_rate = il4965_rs_get_rate,
+ .rate_init = il4965_rs_rate_init_stub,
+ .alloc = il4965_rs_alloc,
+ .free = il4965_rs_free,
+ .alloc_sta = il4965_rs_alloc_sta,
+ .free_sta = il4965_rs_free_sta,
+#ifdef CPTCFG_MAC80211_DEBUGFS
+ .add_sta_debugfs = il4965_rs_add_debugfs,
+ .remove_sta_debugfs = il4965_rs_remove_debugfs,
+#endif
+};
+
+int
+il4965_rate_control_register(void)
+{
+ return ieee80211_rate_control_register(&rs_4965_ops);
+}
+
+void
+il4965_rate_control_unregister(void)
+{
+ ieee80211_rate_control_unregister(&rs_4965_ops);
+}