summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c')
-rw-r--r--drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c1997
1 files changed, 1997 insertions, 0 deletions
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c b/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
new file mode 100644
index 0000000..e895a84
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
@@ -0,0 +1,1997 @@
+
+/* Linux device driver for RTL8180 / RTL8185 / RTL8187SE
+ *
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007,2014 Andrea Merello <andrea.merello@gmail.com>
+ *
+ * Based on the r8180 driver, which is:
+ * Copyright 2004-2005 Andrea Merello <andrea.merello@gmail.com>, et al.
+ *
+ * Thanks to Realtek for their support!
+ *
+ ************************************************************************
+ *
+ * The driver was extended to the RTL8187SE in 2014 by
+ * Andrea Merello <andrea.merello@gmail.com>
+ *
+ * based also on:
+ * - portions of rtl8187se Linux staging driver, Copyright Realtek corp.
+ * (available in drivers/staging/rtl8187se directory of Linux 3.14)
+ * - other GPL, unpublished (until now), Linux driver code,
+ * Copyright Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ * A huge thanks goes to Sara V. Nari who forgives me when I'm
+ * sitting in front of my laptop at evening, week-end, night...
+ *
+ * A special thanks goes to Antonio Cuni, who helped me with
+ * some python userspace stuff I used to debug RTL8187SE code, and who
+ * bought a laptop with an unsupported Wi-Fi card some years ago...
+ *
+ * Thanks to Larry Finger for writing some code for rtl8187se and for
+ * his suggestions.
+ *
+ * Thanks to Dan Carpenter for reviewing my initial patch and for his
+ * suggestions.
+ *
+ * Thanks to Bernhard Schiffner for his help in testing and for his
+ * suggestions.
+ *
+ ************************************************************************
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/eeprom_93cx6.h>
+#include <linux/module.h>
+#include <net/mac80211.h>
+
+#include "rtl8180.h"
+#include "rtl8225.h"
+#include "sa2400.h"
+#include "max2820.h"
+#include "grf5101.h"
+#include "rtl8225se.h"
+
+MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
+MODULE_AUTHOR("Andrea Merello <andrea.merello@gmail.com>");
+MODULE_DESCRIPTION("RTL8180 / RTL8185 / RTL8187SE PCI wireless driver");
+MODULE_LICENSE("GPL");
+
+static const struct pci_device_id rtl8180_table[] = {
+
+ /* rtl8187se */
+ { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8199) },
+
+ /* rtl8185 */
+ { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8185) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x700f) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x701f) },
+
+ /* rtl8180 */
+ { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8180) },
+ { PCI_DEVICE(0x1799, 0x6001) },
+ { PCI_DEVICE(0x1799, 0x6020) },
+ { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x3300) },
+ { PCI_DEVICE(0x1186, 0x3301) },
+ { PCI_DEVICE(0x1432, 0x7106) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(pci, rtl8180_table);
+
+static const struct ieee80211_rate rtl818x_rates[] = {
+ { .bitrate = 10, .hw_value = 0, },
+ { .bitrate = 20, .hw_value = 1, },
+ { .bitrate = 55, .hw_value = 2, },
+ { .bitrate = 110, .hw_value = 3, },
+ { .bitrate = 60, .hw_value = 4, },
+ { .bitrate = 90, .hw_value = 5, },
+ { .bitrate = 120, .hw_value = 6, },
+ { .bitrate = 180, .hw_value = 7, },
+ { .bitrate = 240, .hw_value = 8, },
+ { .bitrate = 360, .hw_value = 9, },
+ { .bitrate = 480, .hw_value = 10, },
+ { .bitrate = 540, .hw_value = 11, },
+};
+
+static const struct ieee80211_channel rtl818x_channels[] = {
+ { .center_freq = 2412 },
+ { .center_freq = 2417 },
+ { .center_freq = 2422 },
+ { .center_freq = 2427 },
+ { .center_freq = 2432 },
+ { .center_freq = 2437 },
+ { .center_freq = 2442 },
+ { .center_freq = 2447 },
+ { .center_freq = 2452 },
+ { .center_freq = 2457 },
+ { .center_freq = 2462 },
+ { .center_freq = 2467 },
+ { .center_freq = 2472 },
+ { .center_freq = 2484 },
+};
+
+/* Queues for rtl8187se card
+ *
+ * name | reg | queue
+ * BC | 7 | 6
+ * MG | 1 | 0
+ * HI | 6 | 1
+ * VO | 5 | 2
+ * VI | 4 | 3
+ * BE | 3 | 4
+ * BK | 2 | 5
+ *
+ * The complete map for DMA kick reg using use all queue is:
+ * static const int rtl8187se_queues_map[RTL8187SE_NR_TX_QUEUES] =
+ * {1, 6, 5, 4, 3, 2, 7};
+ *
+ * .. but.. Because for mac80211 4 queues are enough for QoS we use this
+ *
+ * name | reg | queue
+ * BC | 7 | 4 <- currently not used yet
+ * MG | 1 | x <- Not used
+ * HI | 6 | x <- Not used
+ * VO | 5 | 0 <- used
+ * VI | 4 | 1 <- used
+ * BE | 3 | 2 <- used
+ * BK | 2 | 3 <- used
+ *
+ * Beacon queue could be used, but this is not finished yet.
+ *
+ * I thougth about using the other two queues but I decided not to do this:
+ *
+ * - I'm unsure whether the mac80211 will ever try to use more than 4 queues
+ * by itself.
+ *
+ * - I could route MGMT frames (currently sent over VO queue) to the MGMT
+ * queue but since mac80211 will do not know about it, I will probably gain
+ * some HW priority whenever the VO queue is not empty, but this gain is
+ * limited by the fact that I had to stop the mac80211 queue whenever one of
+ * the VO or MGMT queues is full, stopping also submitting of MGMT frame
+ * to the driver.
+ *
+ * - I don't know how to set in the HW the contention window params for MGMT
+ * and HI-prio queues.
+ */
+
+static const int rtl8187se_queues_map[RTL8187SE_NR_TX_QUEUES] = {5, 4, 3, 2, 7};
+
+/* Queues for rtl8180/rtl8185 cards
+ *
+ * name | reg | prio
+ * BC | 7 | 3
+ * HI | 6 | 0
+ * NO | 5 | 1
+ * LO | 4 | 2
+ *
+ * The complete map for DMA kick reg using all queue is:
+ * static const int rtl8180_queues_map[RTL8180_NR_TX_QUEUES] = {6, 5, 4, 7};
+ *
+ * .. but .. Because the mac80211 needs at least 4 queues for QoS or
+ * otherwise QoS can't be done, we use just one.
+ * Beacon queue could be used, but this is not finished yet.
+ * Actual map is:
+ *
+ * name | reg | prio
+ * BC | 7 | 1 <- currently not used yet.
+ * HI | 6 | x <- not used
+ * NO | 5 | x <- not used
+ * LO | 4 | 0 <- used
+ */
+
+static const int rtl8180_queues_map[RTL8180_NR_TX_QUEUES] = {4, 7};
+
+/* LNA gain table for rtl8187se */
+static const u8 rtl8187se_lna_gain[4] = {02, 17, 29, 39};
+
+void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
+{
+ struct rtl8180_priv *priv = dev->priv;
+ int i = 10;
+ u32 buf;
+
+ buf = (data << 8) | addr;
+
+ rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf | 0x80);
+ while (i--) {
+ rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf);
+ if (rtl818x_ioread8(priv, &priv->map->PHY[2]) == (data & 0xFF))
+ return;
+ }
+}
+
+static void rtl8180_handle_rx(struct ieee80211_hw *dev)
+{
+ struct rtl8180_priv *priv = dev->priv;
+ struct rtl818x_rx_cmd_desc *cmd_desc;
+ unsigned int count = 32;
+ u8 agc, sq;
+ s8 signal = 1;
+ dma_addr_t mapping;
+
+ while (count--) {
+ void *entry = priv->rx_ring + priv->rx_idx * priv->rx_ring_sz;
+ struct sk_buff *skb = priv->rx_buf[priv->rx_idx];
+ u32 flags, flags2, flags3 = 0;
+ u64 tsft;
+
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+ struct rtl8187se_rx_desc *desc = entry;
+
+ flags = le32_to_cpu(desc->flags);
+ /* if ownership flag is set, then we can trust the
+ * HW has written other fields. We must not trust
+ * other descriptor data read before we checked (read)
+ * the ownership flag
+ */
+ rmb();
+ flags3 = le32_to_cpu(desc->flags3);
+ flags2 = le32_to_cpu(desc->flags2);
+ tsft = le64_to_cpu(desc->tsft);
+ } else {
+ struct rtl8180_rx_desc *desc = entry;
+
+ flags = le32_to_cpu(desc->flags);
+ /* same as above */
+ rmb();
+ flags2 = le32_to_cpu(desc->flags2);
+ tsft = le64_to_cpu(desc->tsft);
+ }
+
+ if (flags & RTL818X_RX_DESC_FLAG_OWN)
+ return;
+
+ if (unlikely(flags & (RTL818X_RX_DESC_FLAG_DMA_FAIL |
+ RTL818X_RX_DESC_FLAG_FOF |
+ RTL818X_RX_DESC_FLAG_RX_ERR)))
+ goto done;
+ else {
+ struct ieee80211_rx_status rx_status = {0};
+ struct sk_buff *new_skb = dev_alloc_skb(MAX_RX_SIZE);
+
+ if (unlikely(!new_skb))
+ goto done;
+
+ mapping = pci_map_single(priv->pdev,
+ skb_tail_pointer(new_skb),
+ MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+
+ if (pci_dma_mapping_error(priv->pdev, mapping)) {
+ kfree_skb(new_skb);
+ dev_err(&priv->pdev->dev, "RX DMA map error\n");
+
+ goto done;
+ }
+
+ pci_unmap_single(priv->pdev,
+ *((dma_addr_t *)skb->cb),
+ MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+ skb_put(skb, flags & 0xFFF);
+
+ rx_status.antenna = (flags2 >> 15) & 1;
+ rx_status.rate_idx = (flags >> 20) & 0xF;
+ agc = (flags2 >> 17) & 0x7F;
+
+ switch (priv->chip_family) {
+ case RTL818X_CHIP_FAMILY_RTL8185:
+ if (rx_status.rate_idx > 3)
+ signal = -clamp_t(u8, agc, 25, 90) - 9;
+ else
+ signal = -clamp_t(u8, agc, 30, 95);
+ break;
+ case RTL818X_CHIP_FAMILY_RTL8180:
+ sq = flags2 & 0xff;
+ signal = priv->rf->calc_rssi(agc, sq);
+ break;
+ case RTL818X_CHIP_FAMILY_RTL8187SE:
+ /* OFDM measure reported by HW is signed,
+ * in 0.5dBm unit, with zero centered @ -41dBm
+ * input signal.
+ */
+ if (rx_status.rate_idx > 3) {
+ signal = (s8)((flags3 >> 16) & 0xff);
+ signal = signal / 2 - 41;
+ } else {
+ int idx, bb;
+
+ idx = (agc & 0x60) >> 5;
+ bb = (agc & 0x1F) * 2;
+ /* bias + BB gain + LNA gain */
+ signal = 4 - bb - rtl8187se_lna_gain[idx];
+ }
+ break;
+ }
+ rx_status.signal = signal;
+ rx_status.freq = dev->conf.chandef.chan->center_freq;
+ rx_status.band = dev->conf.chandef.chan->band;
+ rx_status.mactime = tsft;
+ rx_status.flag |= RX_FLAG_MACTIME_START;
+ if (flags & RTL818X_RX_DESC_FLAG_SPLCP)
+ rx_status.flag |= RX_FLAG_SHORTPRE;
+ if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
+ rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
+
+ memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
+ ieee80211_rx_irqsafe(dev, skb);
+
+ skb = new_skb;
+ priv->rx_buf[priv->rx_idx] = skb;
+ *((dma_addr_t *) skb->cb) = mapping;
+ }
+
+ done:
+ cmd_desc = entry;
+ cmd_desc->rx_buf = cpu_to_le32(*((dma_addr_t *)skb->cb));
+ cmd_desc->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN |
+ MAX_RX_SIZE);
+ if (priv->rx_idx == 31)
+ cmd_desc->flags |=
+ cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR);
+ priv->rx_idx = (priv->rx_idx + 1) % 32;
+ }
+}
+
+static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio)
+{
+ struct rtl8180_priv *priv = dev->priv;
+ struct rtl8180_tx_ring *ring = &priv->tx_ring[prio];
+
+ while (skb_queue_len(&ring->queue)) {
+ struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
+ struct sk_buff *skb;
+ struct ieee80211_tx_info *info;
+ u32 flags = le32_to_cpu(entry->flags);
+
+ if (flags & RTL818X_TX_DESC_FLAG_OWN)
+ return;
+
+ ring->idx = (ring->idx + 1) % ring->entries;
+ skb = __skb_dequeue(&ring->queue);
+ pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
+ skb->len, PCI_DMA_TODEVICE);
+
+ info = IEEE80211_SKB_CB(skb);
+ ieee80211_tx_info_clear_status(info);
+
+ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
+ (flags & RTL818X_TX_DESC_FLAG_TX_OK))
+ info->flags |= IEEE80211_TX_STAT_ACK;
+
+ info->status.rates[0].count = (flags & 0xFF) + 1;
+
+ ieee80211_tx_status_irqsafe(dev, skb);
+ if (ring->entries - skb_queue_len(&ring->queue) == 2)
+ ieee80211_wake_queue(dev, prio);
+ }
+}
+
+static irqreturn_t rtl8187se_interrupt(int irq, void *dev_id)
+{
+ struct ieee80211_hw *dev = dev_id;
+ struct rtl8180_priv *priv = dev->priv;
+ u32 reg;
+ unsigned long flags;
+ static int desc_err;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ /* Note: 32-bit interrupt status */
+ reg = rtl818x_ioread32(priv, &priv->map->INT_STATUS_SE);
+ if (unlikely(reg == 0xFFFFFFFF)) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return IRQ_HANDLED;
+ }
+
+ rtl818x_iowrite32(priv, &priv->map->INT_STATUS_SE, reg);
+
+ if (reg & IMR_TIMEOUT1)
+ rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
+
+ if (reg & (IMR_TBDOK | IMR_TBDER))
+ rtl8180_handle_tx(dev, 4);
+
+ if (reg & (IMR_TVODOK | IMR_TVODER))
+ rtl8180_handle_tx(dev, 0);
+
+ if (reg & (IMR_TVIDOK | IMR_TVIDER))
+ rtl8180_handle_tx(dev, 1);
+
+ if (reg & (IMR_TBEDOK | IMR_TBEDER))
+ rtl8180_handle_tx(dev, 2);
+
+ if (reg & (IMR_TBKDOK | IMR_TBKDER))
+ rtl8180_handle_tx(dev, 3);
+
+ if (reg & (IMR_ROK | IMR_RER | RTL818X_INT_SE_RX_DU | IMR_RQOSOK))
+ rtl8180_handle_rx(dev);
+ /* The interface sometimes generates several RX DMA descriptor errors
+ * at startup. Do not report these.
+ */
+ if ((reg & RTL818X_INT_SE_RX_DU) && desc_err++ > 2)
+ if (net_ratelimit())
+ wiphy_err(dev->wiphy, "No RX DMA Descriptor avail\n");
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t rtl8180_interrupt(int irq, void *dev_id)
+{
+ struct ieee80211_hw *dev = dev_id;
+ struct rtl8180_priv *priv = dev->priv;
+ u16 reg;
+
+ spin_lock(&priv->lock);
+ reg = rtl818x_ioread16(priv, &priv->map->INT_STATUS);
+ if (unlikely(reg == 0xFFFF)) {
+ spin_unlock(&priv->lock);
+ return IRQ_HANDLED;
+ }
+
+ rtl818x_iowrite16(priv, &priv->map->INT_STATUS, reg);
+
+ if (reg & (RTL818X_INT_TXB_OK | RTL818X_INT_TXB_ERR))
+ rtl8180_handle_tx(dev, 1);
+
+ if (reg & (RTL818X_INT_TXL_OK | RTL818X_INT_TXL_ERR))
+ rtl8180_handle_tx(dev, 0);
+
+ if (reg & (RTL818X_INT_RX_OK | RTL818X_INT_RX_ERR))
+ rtl8180_handle_rx(dev);
+
+ spin_unlock(&priv->lock);
+
+ return IRQ_HANDLED;
+}
+
+static void rtl8180_tx(struct ieee80211_hw *dev,
+ struct ieee80211_tx_control *control,
+ struct sk_buff *skb)
+{
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ struct rtl8180_priv *priv = dev->priv;
+ struct rtl8180_tx_ring *ring;
+ struct rtl8180_tx_desc *entry;
+ unsigned long flags;
+ unsigned int idx, prio, hw_prio;
+ dma_addr_t mapping;
+ u32 tx_flags;
+ u8 rc_flags;
+ u16 plcp_len = 0;
+ __le16 rts_duration = 0;
+ /* do arithmetic and then convert to le16 */
+ u16 frame_duration = 0;
+
+ prio = skb_get_queue_mapping(skb);
+ ring = &priv->tx_ring[prio];
+
+ mapping = pci_map_single(priv->pdev, skb->data,
+ skb->len, PCI_DMA_TODEVICE);
+
+ if (pci_dma_mapping_error(priv->pdev, mapping)) {
+ kfree_skb(skb);
+ dev_err(&priv->pdev->dev, "TX DMA mapping error\n");
+ return;
+ }
+
+ tx_flags = RTL818X_TX_DESC_FLAG_OWN | RTL818X_TX_DESC_FLAG_FS |
+ RTL818X_TX_DESC_FLAG_LS |
+ (ieee80211_get_tx_rate(dev, info)->hw_value << 24) |
+ skb->len;
+
+ if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180)
+ tx_flags |= RTL818X_TX_DESC_FLAG_DMA |
+ RTL818X_TX_DESC_FLAG_NO_ENC;
+
+ rc_flags = info->control.rates[0].flags;
+
+ /* HW will perform RTS-CTS when only RTS flags is set.
+ * HW will perform CTS-to-self when both RTS and CTS flags are set.
+ * RTS rate and RTS duration will be used also for CTS-to-self.
+ */
+ if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
+ tx_flags |= RTL818X_TX_DESC_FLAG_RTS;
+ tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
+ rts_duration = ieee80211_rts_duration(dev, priv->vif,
+ skb->len, info);
+ } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+ tx_flags |= RTL818X_TX_DESC_FLAG_RTS | RTL818X_TX_DESC_FLAG_CTS;
+ tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
+ rts_duration = ieee80211_ctstoself_duration(dev, priv->vif,
+ skb->len, info);
+ }
+
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) {
+ unsigned int remainder;
+
+ plcp_len = DIV_ROUND_UP(16 * (skb->len + 4),
+ (ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10);
+ remainder = (16 * (skb->len + 4)) %
+ ((ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10);
+ if (remainder <= 6)
+ plcp_len |= 1 << 15;
+ }
+
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+ __le16 duration;
+ /* SIFS time (required by HW) is already included by
+ * ieee80211_generic_frame_duration
+ */
+ duration = ieee80211_generic_frame_duration(dev, priv->vif,
+ NL80211_BAND_2GHZ, skb->len,
+ ieee80211_get_tx_rate(dev, info));
+
+ frame_duration = priv->ack_time + le16_to_cpu(duration);
+ }
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+ if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+ priv->seqno += 0x10;
+ hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+ hdr->seq_ctrl |= cpu_to_le16(priv->seqno);
+ }
+
+ idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries;
+ entry = &ring->desc[idx];
+
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+ entry->frame_duration = cpu_to_le16(frame_duration);
+ entry->frame_len_se = cpu_to_le16(skb->len);
+
+ /* tpc polarity */
+ entry->flags3 = cpu_to_le16(1<<4);
+ } else
+ entry->frame_len = cpu_to_le32(skb->len);
+
+ entry->rts_duration = rts_duration;
+ entry->plcp_len = cpu_to_le16(plcp_len);
+ entry->tx_buf = cpu_to_le32(mapping);
+
+ entry->retry_limit = info->control.rates[0].count - 1;
+
+ /* We must be sure that tx_flags is written last because the HW
+ * looks at it to check if the rest of data is valid or not
+ */
+ wmb();
+ entry->flags = cpu_to_le32(tx_flags);
+ /* We must be sure this has been written before followings HW
+ * register write, because this write will made the HW attempts
+ * to DMA the just-written data
+ */
+ wmb();
+
+ __skb_queue_tail(&ring->queue, skb);
+ if (ring->entries - skb_queue_len(&ring->queue) < 2)
+ ieee80211_stop_queue(dev, prio);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+ /* just poll: rings are stopped with TPPollStop reg */
+ hw_prio = rtl8187se_queues_map[prio];
+ rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING,
+ (1 << hw_prio));
+ } else {
+ hw_prio = rtl8180_queues_map[prio];
+ rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING,
+ (1 << hw_prio) | /* ring to poll */
+ (1<<1) | (1<<2));/* stopped rings */
+ }
+}
+
+static void rtl8180_set_anaparam3(struct rtl8180_priv *priv, u16 anaparam3)
+{
+ u8 reg;
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+ RTL818X_EEPROM_CMD_CONFIG);
+
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+ reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+
+ rtl818x_iowrite16(priv, &priv->map->ANAPARAM3, anaparam3);
+
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+ reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+ RTL818X_EEPROM_CMD_NORMAL);
+}
+
+void rtl8180_set_anaparam2(struct rtl8180_priv *priv, u32 anaparam2)
+{
+ u8 reg;
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+ RTL818X_EEPROM_CMD_CONFIG);
+
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+ reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, anaparam2);
+
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+ reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+ RTL818X_EEPROM_CMD_NORMAL);
+}
+
+void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam)
+{
+ u8 reg;
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+ reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+ reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+}
+
+static void rtl8187se_mac_config(struct ieee80211_hw *dev)
+{
+ struct rtl8180_priv *priv = dev->priv;
+ u8 reg;
+
+ rtl818x_iowrite32(priv, REG_ADDR4(0x1F0), 0);
+ rtl818x_ioread32(priv, REG_ADDR4(0x1F0));
+ rtl818x_iowrite32(priv, REG_ADDR4(0x1F4), 0);
+ rtl818x_ioread32(priv, REG_ADDR4(0x1F4));
+ rtl818x_iowrite8(priv, REG_ADDR1(0x1F8), 0);
+ rtl818x_ioread8(priv, REG_ADDR1(0x1F8));
+ /* Enable DA10 TX power saving */
+ reg = rtl818x_ioread8(priv, &priv->map->PHY_PR);
+ rtl818x_iowrite8(priv, &priv->map->PHY_PR, reg | 0x04);
+ /* Power */
+ rtl818x_iowrite16(priv, PI_DATA_REG, 0x1000);
+ rtl818x_iowrite16(priv, SI_DATA_REG, 0x1000);
+ /* AFE - default to power ON */
+ rtl818x_iowrite16(priv, REG_ADDR2(0x370), 0x0560);
+ rtl818x_iowrite16(priv, REG_ADDR2(0x372), 0x0560);
+ rtl818x_iowrite16(priv, REG_ADDR2(0x374), 0x0DA4);
+ rtl818x_iowrite16(priv, REG_ADDR2(0x376), 0x0DA4);
+ rtl818x_iowrite16(priv, REG_ADDR2(0x378), 0x0560);
+ rtl818x_iowrite16(priv, REG_ADDR2(0x37A), 0x0560);
+ rtl818x_iowrite16(priv, REG_ADDR2(0x37C), 0x00EC);
+ rtl818x_iowrite16(priv, REG_ADDR2(0x37E), 0x00EC);
+ rtl818x_iowrite8(priv, REG_ADDR1(0x24E), 0x01);
+ /* unknown, needed for suspend to RAM resume */
+ rtl818x_iowrite8(priv, REG_ADDR1(0x0A), 0x72);
+}
+
+static void rtl8187se_set_antenna_config(struct ieee80211_hw *dev, u8 def_ant,
+ bool diversity)
+{
+ struct rtl8180_priv *priv = dev->priv;
+
+ rtl8225_write_phy_cck(dev, 0x0C, 0x09);
+ if (diversity) {
+ if (def_ant == 1) {
+ rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x00);
+ rtl8225_write_phy_cck(dev, 0x11, 0xBB);
+ rtl8225_write_phy_cck(dev, 0x01, 0xC7);
+ rtl8225_write_phy_ofdm(dev, 0x0D, 0x54);
+ rtl8225_write_phy_ofdm(dev, 0x18, 0xB2);
+ } else { /* main antenna */
+ rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);
+ rtl8225_write_phy_cck(dev, 0x11, 0x9B);
+ rtl8225_write_phy_cck(dev, 0x01, 0xC7);
+ rtl8225_write_phy_ofdm(dev, 0x0D, 0x5C);
+ rtl8225_write_phy_ofdm(dev, 0x18, 0xB2);
+ }
+ } else { /* disable antenna diversity */
+ if (def_ant == 1) {
+ rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x00);
+ rtl8225_write_phy_cck(dev, 0x11, 0xBB);
+ rtl8225_write_phy_cck(dev, 0x01, 0x47);
+ rtl8225_write_phy_ofdm(dev, 0x0D, 0x54);
+ rtl8225_write_phy_ofdm(dev, 0x18, 0x32);
+ } else { /* main antenna */
+ rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);
+ rtl8225_write_phy_cck(dev, 0x11, 0x9B);
+ rtl8225_write_phy_cck(dev, 0x01, 0x47);
+ rtl8225_write_phy_ofdm(dev, 0x0D, 0x5C);
+ rtl8225_write_phy_ofdm(dev, 0x18, 0x32);
+ }
+ }
+ /* priv->curr_ant = def_ant; */
+}
+
+static void rtl8180_int_enable(struct ieee80211_hw *dev)
+{
+ struct rtl8180_priv *priv = dev->priv;
+
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+ rtl818x_iowrite32(priv, &priv->map->IMR,
+ IMR_TBDER | IMR_TBDOK |
+ IMR_TVODER | IMR_TVODOK |
+ IMR_TVIDER | IMR_TVIDOK |
+ IMR_TBEDER | IMR_TBEDOK |
+ IMR_TBKDER | IMR_TBKDOK |
+ IMR_RDU | IMR_RER |
+ IMR_ROK | IMR_RQOSOK);
+ } else {
+ rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
+ }
+}
+
+static void rtl8180_int_disable(struct ieee80211_hw *dev)
+{
+ struct rtl8180_priv *priv = dev->priv;
+
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+ rtl818x_iowrite32(priv, &priv->map->IMR, 0);
+ } else {
+ rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
+ }
+}
+
+static void rtl8180_conf_basic_rates(struct ieee80211_hw *dev,
+ u32 basic_mask)
+{
+ struct rtl8180_priv *priv = dev->priv;
+ u16 reg;
+ u32 resp_mask;
+ u8 basic_max;
+ u8 resp_max, resp_min;
+
+ resp_mask = basic_mask;
+ /* IEEE80211 says the response rate should be equal to the highest basic
+ * rate that is not faster than received frame. But it says also that if
+ * the basic rate set does not contains any rate for the current
+ * modulation class then mandatory rate set must be used for that
+ * modulation class. Eventually add OFDM mandatory rates..
+ */
+ if ((resp_mask & 0xf) == resp_mask)
+ resp_mask |= 0x150; /* 6, 12, 24Mbps */
+
+ switch (priv->chip_family) {
+
+ case RTL818X_CHIP_FAMILY_RTL8180:
+ /* in 8180 this is NOT a BITMAP */
+ basic_max = fls(basic_mask) - 1;
+ reg = rtl818x_ioread16(priv, &priv->map->BRSR);
+ reg &= ~3;
+ reg |= basic_max;
+ rtl818x_iowrite16(priv, &priv->map->BRSR, reg);
+ break;
+
+ case RTL818X_CHIP_FAMILY_RTL8185:
+ resp_max = fls(resp_mask) - 1;
+ resp_min = ffs(resp_mask) - 1;
+ /* in 8185 this is a BITMAP */
+ rtl818x_iowrite16(priv, &priv->map->BRSR, basic_mask);
+ rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (resp_max << 4) |
+ resp_min);
+ break;
+
+ case RTL818X_CHIP_FAMILY_RTL8187SE:
+ /* in 8187se this is a BITMAP. BRSR reg actually sets
+ * response rates.
+ */
+ rtl818x_iowrite16(priv, &priv->map->BRSR_8187SE, resp_mask);
+ break;
+ }
+}
+
+static void rtl8180_config_cardbus(struct ieee80211_hw *dev)
+{
+ struct rtl8180_priv *priv = dev->priv;
+ u16 reg16;
+ u8 reg8;
+
+ reg8 = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+ reg8 |= 1 << 1;
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg8);
+
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+ rtl818x_iowrite16(priv, FEMR_SE, 0xffff);
+ } else {
+ reg16 = rtl818x_ioread16(priv, &priv->map->FEMR);
+ reg16 |= (1 << 15) | (1 << 14) | (1 << 4);
+ rtl818x_iowrite16(priv, &priv->map->FEMR, reg16);
+ }
+
+}
+
+static int rtl8180_init_hw(struct ieee80211_hw *dev)
+{
+ struct rtl8180_priv *priv = dev->priv;
+ u16 reg;
+ u32 reg32;
+
+ rtl818x_iowrite8(priv, &priv->map->CMD, 0);
+ rtl818x_ioread8(priv, &priv->map->CMD);
+ msleep(10);
+
+ /* reset */
+ rtl8180_int_disable(dev);
+ rtl818x_ioread8(priv, &priv->map->CMD);
+
+ reg = rtl818x_ioread8(priv, &priv->map->CMD);
+ reg &= (1 << 1);
+ reg |= RTL818X_CMD_RESET;
+ rtl818x_iowrite8(priv, &priv->map->CMD, RTL818X_CMD_RESET);
+ rtl818x_ioread8(priv, &priv->map->CMD);
+ msleep(200);
+
+ /* check success of reset */
+ if (rtl818x_ioread8(priv, &priv->map->CMD) & RTL818X_CMD_RESET) {
+ wiphy_err(dev->wiphy, "reset timeout!\n");
+ return -ETIMEDOUT;
+ }
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD);
+ rtl818x_ioread8(priv, &priv->map->CMD);
+ msleep(200);
+
+ if (rtl818x_ioread8(priv, &priv->map->CONFIG3) & (1 << 3)) {
+ rtl8180_config_cardbus(dev);
+ }
+
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+ rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_ENEDCA);
+ else
+ rtl818x_iowrite8(priv, &priv->map->MSR, 0);
+
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180)
+ rtl8180_set_anaparam(priv, priv->anaparam);
+
+ rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
+ /* mac80211 queue have higher prio for lower index. The last queue
+ * (that mac80211 is not aware of) is reserved for beacons (and have
+ * the highest priority on the NIC)
+ */
+ if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8187SE) {
+ rtl818x_iowrite32(priv, &priv->map->TBDA,
+ priv->tx_ring[1].dma);
+ rtl818x_iowrite32(priv, &priv->map->TLPDA,
+ priv->tx_ring[0].dma);
+ } else {
+ rtl818x_iowrite32(priv, &priv->map->TBDA,
+ priv->tx_ring[4].dma);
+ rtl818x_iowrite32(priv, &priv->map->TVODA,
+ priv->tx_ring[0].dma);
+ rtl818x_iowrite32(priv, &priv->map->TVIDA,
+ priv->tx_ring[1].dma);
+ rtl818x_iowrite32(priv, &priv->map->TBEDA,
+ priv->tx_ring[2].dma);
+ rtl818x_iowrite32(priv, &priv->map->TBKDA,
+ priv->tx_ring[3].dma);
+ }
+
+ /* TODO: necessary? specs indicate not */
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg & ~(1 << 3));
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) {
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg | (1 << 4));
+ }
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+ /* TODO: set CONFIG5 for calibrating AGC on rtl8180 + philips radio? */
+
+ /* TODO: turn off hw wep on rtl8180 */
+
+ rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
+
+ if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
+ rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
+ rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0);
+ } else {
+ rtl818x_iowrite8(priv, &priv->map->SECURITY, 0);
+
+ rtl818x_iowrite8(priv, &priv->map->PHY_DELAY, 0x6);
+ rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, 0x4C);
+ }
+
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) {
+ /* TODO: set ClkRun enable? necessary? */
+ reg = rtl818x_ioread8(priv, &priv->map->GP_ENABLE);
+ rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, reg & ~(1 << 6));
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | (1 << 2));
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+ /* fix eccessive IFS after CTS-to-self */
+ if (priv->map_pio) {
+ u8 reg;
+
+ reg = rtl818x_ioread8(priv, &priv->map->PGSELECT);
+ rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1);
+ rtl818x_iowrite8(priv, REG_ADDR1(0xff), 0x35);
+ rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+ } else
+ rtl818x_iowrite8(priv, REG_ADDR1(0x1ff), 0x35);
+ }
+
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+
+ /* the set auto rate fallback bitmask from 1M to 54 Mb/s */
+ rtl818x_iowrite16(priv, ARFR, 0xFFF);
+ rtl818x_ioread16(priv, ARFR);
+
+ /* stop unused queus (no dma alloc) */
+ rtl818x_iowrite8(priv, &priv->map->TPPOLL_STOP,
+ RTL818x_TPPOLL_STOP_MG | RTL818x_TPPOLL_STOP_HI);
+
+ rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0x00);
+ rtl818x_iowrite16(priv, &priv->map->TID_AC_MAP, 0xFA50);
+
+ rtl818x_iowrite16(priv, &priv->map->INT_MIG, 0);
+
+ /* some black magic here.. */
+ rtl8187se_mac_config(dev);
+
+ rtl818x_iowrite16(priv, RFSW_CTRL, 0x569A);
+ rtl818x_ioread16(priv, RFSW_CTRL);
+
+ rtl8180_set_anaparam(priv, RTL8225SE_ANAPARAM_ON);
+ rtl8180_set_anaparam2(priv, RTL8225SE_ANAPARAM2_ON);
+ rtl8180_set_anaparam3(priv, RTL8225SE_ANAPARAM3);
+
+
+ rtl818x_iowrite8(priv, &priv->map->CONFIG5,
+ rtl818x_ioread8(priv, &priv->map->CONFIG5) & 0x7F);
+
+ /*probably this switch led on */
+ rtl818x_iowrite8(priv, &priv->map->PGSELECT,
+ rtl818x_ioread8(priv, &priv->map->PGSELECT) | 0x08);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1BFF);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x2488);
+
+ rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x4003);
+
+ /* the reference code mac hardcode table write
+ * this reg by doing byte-wide accesses.
+ * It does it just for lowest and highest byte..
+ */
+ reg32 = rtl818x_ioread32(priv, &priv->map->RF_PARA);
+ reg32 &= 0x00ffff00;
+ reg32 |= 0xb8000054;
+ rtl818x_iowrite32(priv, &priv->map->RF_PARA, reg32);
+ } else
+ /* stop unused queus (no dma alloc) */
+ rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING,
+ (1<<1) | (1<<2));
+
+ priv->rf->init(dev);
+
+ /* default basic rates are 1,2 Mbps for rtl8180. 1,2,6,9,12,18,24 Mbps
+ * otherwise. bitmask 0x3 and 0x01f3 respectively.
+ * NOTE: currenty rtl8225 RF code changes basic rates, so we need to do
+ * this after rf init.
+ * TODO: try to find out whether RF code really needs to do this..
+ */
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180)
+ rtl8180_conf_basic_rates(dev, 0x3);
+ else
+ rtl8180_conf_basic_rates(dev, 0x1f3);
+
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+ rtl8187se_set_antenna_config(dev,
+ priv->antenna_diversity_default,
+ priv->antenna_diversity_en);
+ return 0;
+}
+
+static int rtl8180_init_rx_ring(struct ieee80211_hw *dev)
+{
+ struct rtl8180_priv *priv = dev->priv;
+ struct rtl818x_rx_cmd_desc *entry;
+ int i;
+
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+ priv->rx_ring_sz = sizeof(struct rtl8187se_rx_desc);
+ else
+ priv->rx_ring_sz = sizeof(struct rtl8180_rx_desc);
+
+ priv->rx_ring = pci_zalloc_consistent(priv->pdev, priv->rx_ring_sz * 32,
+ &priv->rx_ring_dma);
+ if (!priv->rx_ring || (unsigned long)priv->rx_ring & 0xFF) {
+ wiphy_err(dev->wiphy, "Cannot allocate RX ring\n");
+ return -ENOMEM;
+ }
+
+ priv->rx_idx = 0;
+
+ for (i = 0; i < 32; i++) {
+ struct sk_buff *skb = dev_alloc_skb(MAX_RX_SIZE);
+ dma_addr_t *mapping;
+ entry = priv->rx_ring + priv->rx_ring_sz*i;
+ if (!skb) {
+ pci_free_consistent(priv->pdev, priv->rx_ring_sz * 32,
+ priv->rx_ring, priv->rx_ring_dma);
+ wiphy_err(dev->wiphy, "Cannot allocate RX skb\n");
+ return -ENOMEM;
+ }
+ priv->rx_buf[i] = skb;
+ mapping = (dma_addr_t *)skb->cb;
+ *mapping = pci_map_single(priv->pdev, skb_tail_pointer(skb),
+ MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+
+ if (pci_dma_mapping_error(priv->pdev, *mapping)) {
+ kfree_skb(skb);
+ pci_free_consistent(priv->pdev, priv->rx_ring_sz * 32,
+ priv->rx_ring, priv->rx_ring_dma);
+ wiphy_err(dev->wiphy, "Cannot map DMA for RX skb\n");
+ return -ENOMEM;
+ }
+
+ entry->rx_buf = cpu_to_le32(*mapping);
+ entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN |
+ MAX_RX_SIZE);
+ }
+ entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR);
+ return 0;
+}
+
+static void rtl8180_free_rx_ring(struct ieee80211_hw *dev)
+{
+ struct rtl8180_priv *priv = dev->priv;
+ int i;
+
+ for (i = 0; i < 32; i++) {
+ struct sk_buff *skb = priv->rx_buf[i];
+ if (!skb)
+ continue;
+
+ pci_unmap_single(priv->pdev,
+ *((dma_addr_t *)skb->cb),
+ MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+ kfree_skb(skb);
+ }
+
+ pci_free_consistent(priv->pdev, priv->rx_ring_sz * 32,
+ priv->rx_ring, priv->rx_ring_dma);
+ priv->rx_ring = NULL;
+}
+
+static int rtl8180_init_tx_ring(struct ieee80211_hw *dev,
+ unsigned int prio, unsigned int entries)
+{
+ struct rtl8180_priv *priv = dev->priv;
+ struct rtl8180_tx_desc *ring;
+ dma_addr_t dma;
+ int i;
+
+ ring = pci_zalloc_consistent(priv->pdev, sizeof(*ring) * entries,
+ &dma);
+ if (!ring || (unsigned long)ring & 0xFF) {
+ wiphy_err(dev->wiphy, "Cannot allocate TX ring (prio = %d)\n",
+ prio);
+ return -ENOMEM;
+ }
+
+ priv->tx_ring[prio].desc = ring;
+ priv->tx_ring[prio].dma = dma;
+ priv->tx_ring[prio].idx = 0;
+ priv->tx_ring[prio].entries = entries;
+ skb_queue_head_init(&priv->tx_ring[prio].queue);
+
+ for (i = 0; i < entries; i++)
+ ring[i].next_tx_desc =
+ cpu_to_le32((u32)dma + ((i + 1) % entries) * sizeof(*ring));
+
+ return 0;
+}
+
+static void rtl8180_free_tx_ring(struct ieee80211_hw *dev, unsigned int prio)
+{
+ struct rtl8180_priv *priv = dev->priv;
+ struct rtl8180_tx_ring *ring = &priv->tx_ring[prio];
+
+ while (skb_queue_len(&ring->queue)) {
+ struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
+ struct sk_buff *skb = __skb_dequeue(&ring->queue);
+
+ pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
+ skb->len, PCI_DMA_TODEVICE);
+ kfree_skb(skb);
+ ring->idx = (ring->idx + 1) % ring->entries;
+ }
+
+ pci_free_consistent(priv->pdev, sizeof(*ring->desc)*ring->entries,
+ ring->desc, ring->dma);
+ ring->desc = NULL;
+}
+
+static int rtl8180_start(struct ieee80211_hw *dev)
+{
+ struct rtl8180_priv *priv = dev->priv;
+ int ret, i;
+ u32 reg;
+
+ ret = rtl8180_init_rx_ring(dev);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < (dev->queues + 1); i++)
+ if ((ret = rtl8180_init_tx_ring(dev, i, 16)))
+ goto err_free_rings;
+
+ ret = rtl8180_init_hw(dev);
+ if (ret)
+ goto err_free_rings;
+
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+ ret = request_irq(priv->pdev->irq, rtl8187se_interrupt,
+ IRQF_SHARED, KBUILD_MODNAME, dev);
+ } else {
+ ret = request_irq(priv->pdev->irq, rtl8180_interrupt,
+ IRQF_SHARED, KBUILD_MODNAME, dev);
+ }
+
+ if (ret) {
+ wiphy_err(dev->wiphy, "failed to register IRQ handler\n");
+ goto err_free_rings;
+ }
+
+ rtl8180_int_enable(dev);
+
+ /* in rtl8187se at MAR regs offset there is the management
+ * TX descriptor DMA addres..
+ */
+ if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8187SE) {
+ rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
+ rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0);
+ }
+
+ reg = RTL818X_RX_CONF_ONLYERLPKT |
+ RTL818X_RX_CONF_RX_AUTORESETPHY |
+ RTL818X_RX_CONF_MGMT |
+ RTL818X_RX_CONF_DATA |
+ (7 << 8 /* MAX RX DMA */) |
+ RTL818X_RX_CONF_BROADCAST |
+ RTL818X_RX_CONF_NICMAC;
+
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185)
+ reg |= RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2;
+ else if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) {
+ reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE1)
+ ? RTL818X_RX_CONF_CSDM1 : 0;
+ reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE2)
+ ? RTL818X_RX_CONF_CSDM2 : 0;
+ } else {
+ reg &= ~(RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2);
+ }
+
+ priv->rx_conf = reg;
+ rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
+
+ if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
+ reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
+
+ /* CW is not on per-packet basis.
+ * in rtl8185 the CW_VALUE reg is used.
+ * in rtl8187se the AC param regs are used.
+ */
+ reg &= ~RTL818X_CW_CONF_PERPACKET_CW;
+ /* retry limit IS on per-packet basis.
+ * the short and long retry limit in TX_CONF
+ * reg are ignored
+ */
+ reg |= RTL818X_CW_CONF_PERPACKET_RETRY;
+ rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
+
+ reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
+ /* TX antenna and TX gain are not on per-packet basis.
+ * TX Antenna is selected by ANTSEL reg (RX in BB regs).
+ * TX gain is selected with CCK_TX_AGC and OFDM_TX_AGC regs
+ */
+ reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN;
+ reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL;
+ reg |= RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
+ rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
+
+ /* disable early TX */
+ rtl818x_iowrite8(priv, (u8 __iomem *)priv->map + 0xec, 0x3f);
+ }
+
+ reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
+ reg |= (6 << 21 /* MAX TX DMA */) |
+ RTL818X_TX_CONF_NO_ICV;
+
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+ reg |= 1<<30; /* "duration procedure mode" */
+
+ if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180)
+ reg &= ~RTL818X_TX_CONF_PROBE_DTS;
+ else
+ reg &= ~RTL818X_TX_CONF_HW_SEQNUM;
+
+ reg &= ~RTL818X_TX_CONF_DISCW;
+
+ /* different meaning, same value on both rtl8185 and rtl8180 */
+ reg &= ~RTL818X_TX_CONF_SAT_HWPLCP;
+
+ rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
+
+ reg = rtl818x_ioread8(priv, &priv->map->CMD);
+ reg |= RTL818X_CMD_RX_ENABLE;
+ reg |= RTL818X_CMD_TX_ENABLE;
+ rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+
+ return 0;
+
+ err_free_rings:
+ rtl8180_free_rx_ring(dev);
+ for (i = 0; i < (dev->queues + 1); i++)
+ if (priv->tx_ring[i].desc)
+ rtl8180_free_tx_ring(dev, i);
+
+ return ret;
+}
+
+static void rtl8180_stop(struct ieee80211_hw *dev)
+{
+ struct rtl8180_priv *priv = dev->priv;
+ u8 reg;
+ int i;
+
+ rtl8180_int_disable(dev);
+
+ reg = rtl818x_ioread8(priv, &priv->map->CMD);
+ reg &= ~RTL818X_CMD_TX_ENABLE;
+ reg &= ~RTL818X_CMD_RX_ENABLE;
+ rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+
+ priv->rf->stop(dev);
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+ free_irq(priv->pdev->irq, dev);
+
+ rtl8180_free_rx_ring(dev);
+ for (i = 0; i < (dev->queues + 1); i++)
+ rtl8180_free_tx_ring(dev, i);
+}
+
+static u64 rtl8180_get_tsf(struct ieee80211_hw *dev,
+ struct ieee80211_vif *vif)
+{
+ struct rtl8180_priv *priv = dev->priv;
+
+ return rtl818x_ioread32(priv, &priv->map->TSFT[0]) |
+ (u64)(rtl818x_ioread32(priv, &priv->map->TSFT[1])) << 32;
+}
+
+static void rtl8180_beacon_work(struct work_struct *work)
+{
+ struct rtl8180_vif *vif_priv =
+ container_of(work, struct rtl8180_vif, beacon_work.work);
+ struct ieee80211_vif *vif =
+ container_of((void *)vif_priv, struct ieee80211_vif, drv_priv);
+ struct ieee80211_hw *dev = vif_priv->dev;
+ struct ieee80211_mgmt *mgmt;
+ struct sk_buff *skb;
+
+ /* don't overflow the tx ring */
+ if (ieee80211_queue_stopped(dev, 0))
+ goto resched;
+
+ /* grab a fresh beacon */
+ skb = ieee80211_beacon_get(dev, vif);
+ if (!skb)
+ goto resched;
+
+ /*
+ * update beacon timestamp w/ TSF value
+ * TODO: make hardware update beacon timestamp
+ */
+ mgmt = (struct ieee80211_mgmt *)skb->data;
+ mgmt->u.beacon.timestamp = cpu_to_le64(rtl8180_get_tsf(dev, vif));
+
+ /* TODO: use actual beacon queue */
+ skb_set_queue_mapping(skb, 0);
+
+ rtl8180_tx(dev, NULL, skb);
+
+resched:
+ /*
+ * schedule next beacon
+ * TODO: use hardware support for beacon timing
+ */
+ schedule_delayed_work(&vif_priv->beacon_work,
+ usecs_to_jiffies(1024 * vif->bss_conf.beacon_int));
+}
+
+static int rtl8180_add_interface(struct ieee80211_hw *dev,
+ struct ieee80211_vif *vif)
+{
+ struct rtl8180_priv *priv = dev->priv;
+ struct rtl8180_vif *vif_priv;
+
+ /*
+ * We only support one active interface at a time.
+ */
+ if (priv->vif)
+ return -EBUSY;
+
+ switch (vif->type) {
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_ADHOC:
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ priv->vif = vif;
+
+ /* Initialize driver private area */
+ vif_priv = (struct rtl8180_vif *)&vif->drv_priv;
+ vif_priv->dev = dev;
+ INIT_DELAYED_WORK(&vif_priv->beacon_work, rtl8180_beacon_work);
+ vif_priv->enable_beacon = false;
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->MAC[0],
+ le32_to_cpu(*(__le32 *)vif->addr));
+ rtl818x_iowrite16(priv, (__le16 __iomem *)&priv->map->MAC[4],
+ le16_to_cpu(*(__le16 *)(vif->addr + 4)));
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+ return 0;
+}
+
+static void rtl8180_remove_interface(struct ieee80211_hw *dev,
+ struct ieee80211_vif *vif)
+{
+ struct rtl8180_priv *priv = dev->priv;
+ priv->vif = NULL;
+}
+
+static int rtl8180_config(struct ieee80211_hw *dev, u32 changed)
+{
+ struct rtl8180_priv *priv = dev->priv;
+ struct ieee80211_conf *conf = &dev->conf;
+
+ priv->rf->set_chan(dev, conf);
+
+ return 0;
+}
+
+static void rtl8187se_conf_ac_parm(struct ieee80211_hw *dev, u8 queue)
+{
+ const struct ieee80211_tx_queue_params *params;
+ struct rtl8180_priv *priv = dev->priv;
+
+ /* hw value */
+ u32 ac_param;
+
+ u8 aifs;
+ u8 txop;
+ u8 cw_min, cw_max;
+
+ params = &priv->queue_param[queue];
+
+ cw_min = fls(params->cw_min);
+ cw_max = fls(params->cw_max);
+
+ aifs = 10 + params->aifs * priv->slot_time;
+
+ /* TODO: check if txop HW is in us (mult by 32) */
+ txop = params->txop;
+
+ ac_param = txop << AC_PARAM_TXOP_LIMIT_SHIFT |
+ cw_max << AC_PARAM_ECW_MAX_SHIFT |
+ cw_min << AC_PARAM_ECW_MIN_SHIFT |
+ aifs << AC_PARAM_AIFS_SHIFT;
+
+ switch (queue) {
+ case IEEE80211_AC_BK:
+ rtl818x_iowrite32(priv, &priv->map->AC_BK_PARAM, ac_param);
+ break;
+ case IEEE80211_AC_BE:
+ rtl818x_iowrite32(priv, &priv->map->AC_BE_PARAM, ac_param);
+ break;
+ case IEEE80211_AC_VI:
+ rtl818x_iowrite32(priv, &priv->map->AC_VI_PARAM, ac_param);
+ break;
+ case IEEE80211_AC_VO:
+ rtl818x_iowrite32(priv, &priv->map->AC_VO_PARAM, ac_param);
+ break;
+ }
+}
+
+static int rtl8180_conf_tx(struct ieee80211_hw *dev,
+ struct ieee80211_vif *vif, u16 queue,
+ const struct ieee80211_tx_queue_params *params)
+{
+ struct rtl8180_priv *priv = dev->priv;
+ u8 cw_min, cw_max;
+
+ /* nothing to do ? */
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180)
+ return 0;
+
+ cw_min = fls(params->cw_min);
+ cw_max = fls(params->cw_max);
+
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+ priv->queue_param[queue] = *params;
+ rtl8187se_conf_ac_parm(dev, queue);
+ } else
+ rtl818x_iowrite8(priv, &priv->map->CW_VAL,
+ (cw_max << 4) | cw_min);
+ return 0;
+}
+
+static void rtl8180_conf_erp(struct ieee80211_hw *dev,
+ struct ieee80211_bss_conf *info)
+{
+ struct rtl8180_priv *priv = dev->priv;
+ u8 sifs, difs;
+ int eifs;
+ u8 hw_eifs;
+
+ /* TODO: should we do something ? */
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180)
+ return;
+
+ /* I _hope_ this means 10uS for the HW.
+ * In reference code it is 0x22 for
+ * both rtl8187L and rtl8187SE
+ */
+ sifs = 0x22;
+
+ if (info->use_short_slot)
+ priv->slot_time = 9;
+ else
+ priv->slot_time = 20;
+
+ /* 10 is SIFS time in uS */
+ difs = 10 + 2 * priv->slot_time;
+ eifs = 10 + difs + priv->ack_time;
+
+ /* HW should use 4uS units for EIFS (I'm sure for rtl8185)*/
+ hw_eifs = DIV_ROUND_UP(eifs, 4);
+
+
+ rtl818x_iowrite8(priv, &priv->map->SLOT, priv->slot_time);
+ rtl818x_iowrite8(priv, &priv->map->SIFS, sifs);
+ rtl818x_iowrite8(priv, &priv->map->DIFS, difs);
+
+ /* from reference code. set ack timeout reg = eifs reg */
+ rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, hw_eifs);
+
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+ rtl818x_iowrite8(priv, &priv->map->EIFS_8187SE, hw_eifs);
+ else if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) {
+ /* rtl8187/rtl8185 HW bug. After EIFS is elapsed,
+ * the HW still wait for DIFS.
+ * HW uses 4uS units for EIFS.
+ */
+ hw_eifs = DIV_ROUND_UP(eifs - difs, 4);
+
+ rtl818x_iowrite8(priv, &priv->map->EIFS, hw_eifs);
+ }
+}
+
+static void rtl8180_bss_info_changed(struct ieee80211_hw *dev,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *info,
+ u32 changed)
+{
+ struct rtl8180_priv *priv = dev->priv;
+ struct rtl8180_vif *vif_priv;
+ int i;
+ u8 reg;
+
+ vif_priv = (struct rtl8180_vif *)&vif->drv_priv;
+
+ if (changed & BSS_CHANGED_BSSID) {
+ rtl818x_iowrite16(priv, (__le16 __iomem *)&priv->map->BSSID[0],
+ le16_to_cpu(*(__le16 *)info->bssid));
+ rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->BSSID[2],
+ le32_to_cpu(*(__le32 *)(info->bssid + 2)));
+
+ if (is_valid_ether_addr(info->bssid)) {
+ if (vif->type == NL80211_IFTYPE_ADHOC)
+ reg = RTL818X_MSR_ADHOC;
+ else
+ reg = RTL818X_MSR_INFRA;
+ } else
+ reg = RTL818X_MSR_NO_LINK;
+
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+ reg |= RTL818X_MSR_ENEDCA;
+
+ rtl818x_iowrite8(priv, &priv->map->MSR, reg);
+ }
+
+ if (changed & BSS_CHANGED_BASIC_RATES)
+ rtl8180_conf_basic_rates(dev, info->basic_rates);
+
+ if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_ERP_PREAMBLE)) {
+
+ /* when preamble changes, acktime duration changes, and erp must
+ * be recalculated. ACK time is calculated at lowest rate.
+ * Since mac80211 include SIFS time we remove it (-10)
+ */
+ priv->ack_time =
+ le16_to_cpu(ieee80211_generic_frame_duration(dev,
+ priv->vif,
+ NL80211_BAND_2GHZ, 10,
+ &priv->rates[0])) - 10;
+
+ rtl8180_conf_erp(dev, info);
+
+ /* mac80211 supplies aifs_n to driver and calls
+ * conf_tx callback whether aifs_n changes, NOT
+ * when aifs changes.
+ * Aifs should be recalculated if slot changes.
+ */
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+ for (i = 0; i < 4; i++)
+ rtl8187se_conf_ac_parm(dev, i);
+ }
+ }
+
+ if (changed & BSS_CHANGED_BEACON_ENABLED)
+ vif_priv->enable_beacon = info->enable_beacon;
+
+ if (changed & (BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_BEACON)) {
+ cancel_delayed_work_sync(&vif_priv->beacon_work);
+ if (vif_priv->enable_beacon)
+ schedule_work(&vif_priv->beacon_work.work);
+ }
+}
+
+static u64 rtl8180_prepare_multicast(struct ieee80211_hw *dev,
+ struct netdev_hw_addr_list *mc_list)
+{
+ return netdev_hw_addr_list_count(mc_list);
+}
+
+static void rtl8180_configure_filter(struct ieee80211_hw *dev,
+ unsigned int changed_flags,
+ unsigned int *total_flags,
+ u64 multicast)
+{
+ struct rtl8180_priv *priv = dev->priv;
+
+ if (changed_flags & FIF_FCSFAIL)
+ priv->rx_conf ^= RTL818X_RX_CONF_FCS;
+ if (changed_flags & FIF_CONTROL)
+ priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
+ if (changed_flags & FIF_OTHER_BSS)
+ priv->rx_conf ^= RTL818X_RX_CONF_MONITOR;
+ if (*total_flags & FIF_ALLMULTI || multicast > 0)
+ priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
+ else
+ priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST;
+
+ *total_flags = 0;
+
+ if (priv->rx_conf & RTL818X_RX_CONF_FCS)
+ *total_flags |= FIF_FCSFAIL;
+ if (priv->rx_conf & RTL818X_RX_CONF_CTRL)
+ *total_flags |= FIF_CONTROL;
+ if (priv->rx_conf & RTL818X_RX_CONF_MONITOR)
+ *total_flags |= FIF_OTHER_BSS;
+ if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST)
+ *total_flags |= FIF_ALLMULTI;
+
+ rtl818x_iowrite32(priv, &priv->map->RX_CONF, priv->rx_conf);
+}
+
+static const struct ieee80211_ops rtl8180_ops = {
+ .tx = rtl8180_tx,
+ .start = rtl8180_start,
+ .stop = rtl8180_stop,
+ .add_interface = rtl8180_add_interface,
+ .remove_interface = rtl8180_remove_interface,
+ .config = rtl8180_config,
+ .bss_info_changed = rtl8180_bss_info_changed,
+ .conf_tx = rtl8180_conf_tx,
+ .prepare_multicast = rtl8180_prepare_multicast,
+ .configure_filter = rtl8180_configure_filter,
+ .get_tsf = rtl8180_get_tsf,
+};
+
+static void rtl8180_eeprom_register_read(struct eeprom_93cx6 *eeprom)
+{
+ struct rtl8180_priv *priv = eeprom->data;
+ u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+
+ eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
+ eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
+ eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
+ eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
+}
+
+static void rtl8180_eeprom_register_write(struct eeprom_93cx6 *eeprom)
+{
+ struct rtl8180_priv *priv = eeprom->data;
+ u8 reg = 2 << 6;
+
+ if (eeprom->reg_data_in)
+ reg |= RTL818X_EEPROM_CMD_WRITE;
+ if (eeprom->reg_data_out)
+ reg |= RTL818X_EEPROM_CMD_READ;
+ if (eeprom->reg_data_clock)
+ reg |= RTL818X_EEPROM_CMD_CK;
+ if (eeprom->reg_chip_select)
+ reg |= RTL818X_EEPROM_CMD_CS;
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg);
+ rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+ udelay(10);
+}
+
+static void rtl8180_eeprom_read(struct rtl8180_priv *priv)
+{
+ struct eeprom_93cx6 eeprom;
+ int eeprom_cck_table_adr;
+ u16 eeprom_val;
+ int i;
+
+ eeprom.data = priv;
+ eeprom.register_read = rtl8180_eeprom_register_read;
+ eeprom.register_write = rtl8180_eeprom_register_write;
+ if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
+ eeprom.width = PCI_EEPROM_WIDTH_93C66;
+ else
+ eeprom.width = PCI_EEPROM_WIDTH_93C46;
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+ RTL818X_EEPROM_CMD_PROGRAM);
+ rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+ udelay(10);
+
+ eeprom_93cx6_read(&eeprom, 0x06, &eeprom_val);
+ eeprom_val &= 0xFF;
+ priv->rf_type = eeprom_val;
+
+ eeprom_93cx6_read(&eeprom, 0x17, &eeprom_val);
+ priv->csthreshold = eeprom_val >> 8;
+
+ eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)priv->mac_addr, 3);
+
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+ eeprom_cck_table_adr = 0x30;
+ else
+ eeprom_cck_table_adr = 0x10;
+
+ /* CCK TX power */
+ for (i = 0; i < 14; i += 2) {
+ u16 txpwr;
+ eeprom_93cx6_read(&eeprom, eeprom_cck_table_adr + (i >> 1),
+ &txpwr);
+ priv->channels[i].hw_value = txpwr & 0xFF;
+ priv->channels[i + 1].hw_value = txpwr >> 8;
+ }
+
+ /* OFDM TX power */
+ if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
+ for (i = 0; i < 14; i += 2) {
+ u16 txpwr;
+ eeprom_93cx6_read(&eeprom, 0x20 + (i >> 1), &txpwr);
+ priv->channels[i].hw_value |= (txpwr & 0xFF) << 8;
+ priv->channels[i + 1].hw_value |= txpwr & 0xFF00;
+ }
+ }
+
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) {
+ __le32 anaparam;
+ eeprom_93cx6_multiread(&eeprom, 0xD, (__le16 *)&anaparam, 2);
+ priv->anaparam = le32_to_cpu(anaparam);
+ eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam);
+ }
+
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+ eeprom_93cx6_read(&eeprom, 0x3F, &eeprom_val);
+ priv->antenna_diversity_en = !!(eeprom_val & 0x100);
+ priv->antenna_diversity_default = (eeprom_val & 0xC00) == 0x400;
+
+ eeprom_93cx6_read(&eeprom, 0x7C, &eeprom_val);
+ priv->xtal_out = eeprom_val & 0xF;
+ priv->xtal_in = (eeprom_val & 0xF0) >> 4;
+ priv->xtal_cal = !!(eeprom_val & 0x1000);
+ priv->thermal_meter_val = (eeprom_val & 0xF00) >> 8;
+ priv->thermal_meter_en = !!(eeprom_val & 0x2000);
+ }
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+ RTL818X_EEPROM_CMD_NORMAL);
+}
+
+static int rtl8180_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct ieee80211_hw *dev;
+ struct rtl8180_priv *priv;
+ unsigned long mem_addr, mem_len;
+ unsigned int io_addr, io_len;
+ int err;
+ const char *chip_name, *rf_name = NULL;
+ u32 reg;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ printk(KERN_ERR "%s (rtl8180): Cannot enable new PCI device\n",
+ pci_name(pdev));
+ return err;
+ }
+
+ err = pci_request_regions(pdev, KBUILD_MODNAME);
+ if (err) {
+ printk(KERN_ERR "%s (rtl8180): Cannot obtain PCI resources\n",
+ pci_name(pdev));
+ goto err_disable_dev;
+ }
+
+ io_addr = pci_resource_start(pdev, 0);
+ io_len = pci_resource_len(pdev, 0);
+ mem_addr = pci_resource_start(pdev, 1);
+ mem_len = pci_resource_len(pdev, 1);
+
+ if (mem_len < sizeof(struct rtl818x_csr) ||
+ io_len < sizeof(struct rtl818x_csr)) {
+ printk(KERN_ERR "%s (rtl8180): Too short PCI resources\n",
+ pci_name(pdev));
+ err = -ENOMEM;
+ goto err_free_reg;
+ }
+
+ if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) ||
+ (err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))) {
+ printk(KERN_ERR "%s (rtl8180): No suitable DMA available\n",
+ pci_name(pdev));
+ goto err_free_reg;
+ }
+
+ pci_set_master(pdev);
+
+ dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8180_ops);
+ if (!dev) {
+ printk(KERN_ERR "%s (rtl8180): ieee80211 alloc failed\n",
+ pci_name(pdev));
+ err = -ENOMEM;
+ goto err_free_reg;
+ }
+
+ priv = dev->priv;
+ priv->pdev = pdev;
+
+ dev->max_rates = 1;
+ SET_IEEE80211_DEV(dev, &pdev->dev);
+ pci_set_drvdata(pdev, dev);
+
+ priv->map_pio = false;
+ priv->map = pci_iomap(pdev, 1, mem_len);
+ if (!priv->map) {
+ priv->map = pci_iomap(pdev, 0, io_len);
+ priv->map_pio = true;
+ }
+
+ if (!priv->map) {
+ dev_err(&pdev->dev, "Cannot map device memory/PIO\n");
+ err = -ENOMEM;
+ goto err_free_dev;
+ }
+
+ BUILD_BUG_ON(sizeof(priv->channels) != sizeof(rtl818x_channels));
+ BUILD_BUG_ON(sizeof(priv->rates) != sizeof(rtl818x_rates));
+
+ memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels));
+ memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates));
+
+ priv->band.band = NL80211_BAND_2GHZ;
+ priv->band.channels = priv->channels;
+ priv->band.n_channels = ARRAY_SIZE(rtl818x_channels);
+ priv->band.bitrates = priv->rates;
+ priv->band.n_bitrates = 4;
+ dev->wiphy->bands[NL80211_BAND_2GHZ] = &priv->band;
+
+ ieee80211_hw_set(dev, HOST_BROADCAST_PS_BUFFERING);
+ ieee80211_hw_set(dev, RX_INCLUDES_FCS);
+
+ dev->vif_data_size = sizeof(struct rtl8180_vif);
+ dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC);
+ dev->max_signal = 65;
+
+ reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
+ reg &= RTL818X_TX_CONF_HWVER_MASK;
+ switch (reg) {
+ case RTL818X_TX_CONF_R8180_ABCD:
+ chip_name = "RTL8180";
+ priv->chip_family = RTL818X_CHIP_FAMILY_RTL8180;
+ break;
+
+ case RTL818X_TX_CONF_R8180_F:
+ chip_name = "RTL8180vF";
+ priv->chip_family = RTL818X_CHIP_FAMILY_RTL8180;
+ break;
+
+ case RTL818X_TX_CONF_R8185_ABC:
+ chip_name = "RTL8185";
+ priv->chip_family = RTL818X_CHIP_FAMILY_RTL8185;
+ break;
+
+ case RTL818X_TX_CONF_R8185_D:
+ chip_name = "RTL8185vD";
+ priv->chip_family = RTL818X_CHIP_FAMILY_RTL8185;
+ break;
+
+ case RTL818X_TX_CONF_RTL8187SE:
+ chip_name = "RTL8187SE";
+ if (priv->map_pio) {
+ dev_err(&pdev->dev,
+ "MMIO failed. PIO not supported on RTL8187SE\n");
+ err = -ENOMEM;
+ goto err_iounmap;
+ }
+ priv->chip_family = RTL818X_CHIP_FAMILY_RTL8187SE;
+ break;
+
+ default:
+ printk(KERN_ERR "%s (rtl8180): Unknown chip! (0x%x)\n",
+ pci_name(pdev), reg >> 25);
+ err = -ENODEV;
+ goto err_iounmap;
+ }
+
+ /* we declare to MAC80211 all the queues except for beacon queue
+ * that will be eventually handled by DRV.
+ * TX rings are arranged in such a way that lower is the IDX,
+ * higher is the priority, in order to achieve direct mapping
+ * with mac80211, however the beacon queue is an exception and it
+ * is mapped on the highst tx ring IDX.
+ */
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+ dev->queues = RTL8187SE_NR_TX_QUEUES - 1;
+ else
+ dev->queues = RTL8180_NR_TX_QUEUES - 1;
+
+ if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
+ priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates);
+ pci_try_set_mwi(pdev);
+ }
+
+ if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180)
+ ieee80211_hw_set(dev, SIGNAL_DBM);
+ else
+ ieee80211_hw_set(dev, SIGNAL_UNSPEC);
+
+ rtl8180_eeprom_read(priv);
+
+ switch (priv->rf_type) {
+ case 1: rf_name = "Intersil";
+ break;
+ case 2: rf_name = "RFMD";
+ break;
+ case 3: priv->rf = &sa2400_rf_ops;
+ break;
+ case 4: priv->rf = &max2820_rf_ops;
+ break;
+ case 5: priv->rf = &grf5101_rf_ops;
+ break;
+ case 9:
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+ priv->rf = rtl8187se_detect_rf(dev);
+ else
+ priv->rf = rtl8180_detect_rf(dev);
+ break;
+ case 10:
+ rf_name = "RTL8255";
+ break;
+ default:
+ printk(KERN_ERR "%s (rtl8180): Unknown RF! (0x%x)\n",
+ pci_name(pdev), priv->rf_type);
+ err = -ENODEV;
+ goto err_iounmap;
+ }
+
+ if (!priv->rf) {
+ printk(KERN_ERR "%s (rtl8180): %s RF frontend not supported!\n",
+ pci_name(pdev), rf_name);
+ err = -ENODEV;
+ goto err_iounmap;
+ }
+
+ if (!is_valid_ether_addr(priv->mac_addr)) {
+ printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using"
+ " randomly generated MAC addr\n", pci_name(pdev));
+ eth_random_addr(priv->mac_addr);
+ }
+ SET_IEEE80211_PERM_ADDR(dev, priv->mac_addr);
+
+ spin_lock_init(&priv->lock);
+
+ err = ieee80211_register_hw(dev);
+ if (err) {
+ printk(KERN_ERR "%s (rtl8180): Cannot register device\n",
+ pci_name(pdev));
+ goto err_iounmap;
+ }
+
+ wiphy_info(dev->wiphy, "hwaddr %pm, %s + %s\n",
+ priv->mac_addr, chip_name, priv->rf->name);
+
+ return 0;
+
+ err_iounmap:
+ pci_iounmap(pdev, priv->map);
+
+ err_free_dev:
+ ieee80211_free_hw(dev);
+
+ err_free_reg:
+ pci_release_regions(pdev);
+
+ err_disable_dev:
+ pci_disable_device(pdev);
+ return err;
+}
+
+static void rtl8180_remove(struct pci_dev *pdev)
+{
+ struct ieee80211_hw *dev = pci_get_drvdata(pdev);
+ struct rtl8180_priv *priv;
+
+ if (!dev)
+ return;
+
+ ieee80211_unregister_hw(dev);
+
+ priv = dev->priv;
+
+ pci_iounmap(pdev, priv->map);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ ieee80211_free_hw(dev);
+}
+
+#ifdef CONFIG_PM
+static int rtl8180_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ pci_save_state(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ return 0;
+}
+
+static int rtl8180_resume(struct pci_dev *pdev)
+{
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+static struct pci_driver rtl8180_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = rtl8180_table,
+ .probe = rtl8180_probe,
+ .remove = rtl8180_remove,
+#ifdef CONFIG_PM
+ .suspend = rtl8180_suspend,
+ .resume = rtl8180_resume,
+#endif /* CONFIG_PM */
+};
+
+module_pci_driver(rtl8180_driver);