summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c')
-rw-r--r--drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c245
1 files changed, 245 insertions, 0 deletions
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c b/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c
new file mode 100644
index 0000000..5235a89
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c
@@ -0,0 +1,245 @@
+/*
+ * Linux LED driver for RTL8187
+ *
+ * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ * Based on the LED handling in the r8187 driver, which is:
+ * Copyright (c) Realtek Semiconductor Corp. All rights reserved.
+ *
+ * Thanks to Realtek for their support!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifdef CPTCFG_RTL8187_LEDS
+
+#include <net/mac80211.h>
+#include <linux/usb.h>
+#include <linux/eeprom_93cx6.h>
+
+#include "rtl8187.h"
+#include "leds.h"
+
+static void led_turn_on(struct work_struct *work)
+{
+ /* As this routine does read/write operations on the hardware, it must
+ * be run from a work queue.
+ */
+ u8 reg;
+ struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
+ led_on.work);
+ struct rtl8187_led *led = &priv->led_tx;
+
+ /* Don't change the LED, when the device is down. */
+ if (!priv->vif || priv->vif->type == NL80211_IFTYPE_UNSPECIFIED)
+ return ;
+
+ /* Skip if the LED is not registered. */
+ if (!led->dev)
+ return;
+ mutex_lock(&priv->conf_mutex);
+ switch (led->ledpin) {
+ case LED_PIN_GPIO0:
+ rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x01);
+ rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x00);
+ break;
+ case LED_PIN_LED0:
+ reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 4);
+ rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+ break;
+ case LED_PIN_LED1:
+ reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 5);
+ rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+ break;
+ case LED_PIN_HW:
+ default:
+ break;
+ }
+ mutex_unlock(&priv->conf_mutex);
+}
+
+static void led_turn_off(struct work_struct *work)
+{
+ /* As this routine does read/write operations on the hardware, it must
+ * be run from a work queue.
+ */
+ u8 reg;
+ struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
+ led_off.work);
+ struct rtl8187_led *led = &priv->led_tx;
+
+ /* Don't change the LED, when the device is down. */
+ if (!priv->vif || priv->vif->type == NL80211_IFTYPE_UNSPECIFIED)
+ return ;
+
+ /* Skip if the LED is not registered. */
+ if (!led->dev)
+ return;
+ mutex_lock(&priv->conf_mutex);
+ switch (led->ledpin) {
+ case LED_PIN_GPIO0:
+ rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x01);
+ rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x01);
+ break;
+ case LED_PIN_LED0:
+ reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 4);
+ rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+ break;
+ case LED_PIN_LED1:
+ reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 5);
+ rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+ break;
+ case LED_PIN_HW:
+ default:
+ break;
+ }
+ mutex_unlock(&priv->conf_mutex);
+}
+
+/* Callback from the LED subsystem. */
+static void rtl8187_led_brightness_set(struct led_classdev *led_dev,
+ enum led_brightness brightness)
+{
+ struct rtl8187_led *led = container_of(led_dev, struct rtl8187_led,
+ led_dev);
+ struct ieee80211_hw *hw = led->dev;
+ struct rtl8187_priv *priv;
+ static bool radio_on;
+
+ if (!hw)
+ return;
+ priv = hw->priv;
+ if (led->is_radio) {
+ if (brightness == LED_FULL) {
+ ieee80211_queue_delayed_work(hw, &priv->led_on, 0);
+ radio_on = true;
+ } else if (radio_on) {
+ radio_on = false;
+ cancel_delayed_work(&priv->led_on);
+ ieee80211_queue_delayed_work(hw, &priv->led_off, 0);
+ }
+ } else if (radio_on) {
+ if (brightness == LED_OFF) {
+ ieee80211_queue_delayed_work(hw, &priv->led_off, 0);
+ /* The LED is off for 1/20 sec - it just blinks. */
+ ieee80211_queue_delayed_work(hw, &priv->led_on,
+ HZ / 20);
+ } else
+ ieee80211_queue_delayed_work(hw, &priv->led_on, 0);
+ }
+}
+
+static int rtl8187_register_led(struct ieee80211_hw *dev,
+ struct rtl8187_led *led, const char *name,
+ const char *default_trigger, u8 ledpin,
+ bool is_radio)
+{
+ int err;
+ struct rtl8187_priv *priv = dev->priv;
+
+ if (led->dev)
+ return -EEXIST;
+ if (!default_trigger)
+ return -EINVAL;
+ led->dev = dev;
+ led->ledpin = ledpin;
+ led->is_radio = is_radio;
+ strncpy(led->name, name, sizeof(led->name));
+
+ led->led_dev.name = led->name;
+ led->led_dev.default_trigger = default_trigger;
+ led->led_dev.brightness_set = rtl8187_led_brightness_set;
+
+ err = led_classdev_register(&priv->udev->dev, &led->led_dev);
+ if (err) {
+ printk(KERN_INFO "LEDs: Failed to register %s\n", name);
+ led->dev = NULL;
+ return err;
+ }
+ return 0;
+}
+
+static void rtl8187_unregister_led(struct rtl8187_led *led)
+{
+ struct ieee80211_hw *hw = led->dev;
+ struct rtl8187_priv *priv = hw->priv;
+
+ led_classdev_unregister(&led->led_dev);
+ flush_delayed_work(&priv->led_off);
+ led->dev = NULL;
+}
+
+void rtl8187_leds_init(struct ieee80211_hw *dev, u16 custid)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ char name[RTL8187_LED_MAX_NAME_LEN + 1];
+ u8 ledpin;
+ int err;
+
+ /* According to the vendor driver, the LED operation depends on the
+ * customer ID encoded in the EEPROM
+ */
+ printk(KERN_INFO "rtl8187: Customer ID is 0x%02X\n", custid);
+ switch (custid) {
+ case EEPROM_CID_RSVD0:
+ case EEPROM_CID_RSVD1:
+ case EEPROM_CID_SERCOMM_PS:
+ case EEPROM_CID_QMI:
+ case EEPROM_CID_DELL:
+ case EEPROM_CID_TOSHIBA:
+ ledpin = LED_PIN_GPIO0;
+ break;
+ case EEPROM_CID_ALPHA0:
+ ledpin = LED_PIN_LED0;
+ break;
+ case EEPROM_CID_HW:
+ ledpin = LED_PIN_HW;
+ break;
+ default:
+ ledpin = LED_PIN_GPIO0;
+ }
+
+ INIT_DELAYED_WORK(&priv->led_on, led_turn_on);
+ INIT_DELAYED_WORK(&priv->led_off, led_turn_off);
+
+ snprintf(name, sizeof(name),
+ "rtl8187-%s::radio", wiphy_name(dev->wiphy));
+ err = rtl8187_register_led(dev, &priv->led_radio, name,
+ ieee80211_get_radio_led_name(dev), ledpin, true);
+ if (err)
+ return;
+
+ snprintf(name, sizeof(name),
+ "rtl8187-%s::tx", wiphy_name(dev->wiphy));
+ err = rtl8187_register_led(dev, &priv->led_tx, name,
+ ieee80211_get_tx_led_name(dev), ledpin, false);
+ if (err)
+ goto err_tx;
+
+ snprintf(name, sizeof(name),
+ "rtl8187-%s::rx", wiphy_name(dev->wiphy));
+ err = rtl8187_register_led(dev, &priv->led_rx, name,
+ ieee80211_get_rx_led_name(dev), ledpin, false);
+ if (!err)
+ return;
+
+ /* registration of RX LED failed - unregister */
+ rtl8187_unregister_led(&priv->led_tx);
+err_tx:
+ rtl8187_unregister_led(&priv->led_radio);
+}
+
+void rtl8187_leds_exit(struct ieee80211_hw *dev)
+{
+ struct rtl8187_priv *priv = dev->priv;
+
+ rtl8187_unregister_led(&priv->led_radio);
+ rtl8187_unregister_led(&priv->led_rx);
+ rtl8187_unregister_led(&priv->led_tx);
+ cancel_delayed_work_sync(&priv->led_off);
+ cancel_delayed_work_sync(&priv->led_on);
+}
+#endif /* def CPTCFG_RTL8187_LEDS */
+