summaryrefslogtreecommitdiff
path: root/drivers/nfc/st-nci/st-nci.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/nfc/st-nci/st-nci.h')
-rw-r--r--drivers/nfc/st-nci/st-nci.h153
1 files changed, 153 insertions, 0 deletions
diff --git a/drivers/nfc/st-nci/st-nci.h b/drivers/nfc/st-nci/st-nci.h
new file mode 100644
index 0000000..afaf138
--- /dev/null
+++ b/drivers/nfc/st-nci/st-nci.h
@@ -0,0 +1,153 @@
+/*
+ * NCI based Driver for STMicroelectronics NFC Chip
+ *
+ * Copyright (C) 2014 STMicroelectronics SAS. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __LOCAL_ST_NCI_H_
+#define __LOCAL_ST_NCI_H_
+
+#include "ndlc.h"
+
+/* Define private flags: */
+#define ST_NCI_RUNNING 1
+
+#define ST_NCI_CORE_PROP 0x01
+#define ST_NCI_SET_NFC_MODE 0x02
+
+/*
+ * ref ISO7816-3 chap 8.1. the initial character TS is followed by a
+ * sequence of at most 32 characters.
+ */
+#define ST_NCI_ESE_MAX_LENGTH 33
+
+#define ST_NCI_DEVICE_MGNT_GATE 0x01
+
+#define ST_NCI_VENDOR_OUI 0x0080E1 /* STMicroelectronics */
+#define ST_NCI_FACTORY_MODE 2
+
+struct nci_mode_set_cmd {
+ u8 cmd_type;
+ u8 mode;
+} __packed;
+
+struct nci_mode_set_rsp {
+ u8 status;
+} __packed;
+
+struct st_nci_se_status {
+ bool is_ese_present;
+ bool is_uicc_present;
+};
+
+struct st_nci_se_info {
+ struct st_nci_se_status *se_status;
+ u8 atr[ST_NCI_ESE_MAX_LENGTH];
+ struct completion req_completion;
+
+ struct timer_list bwi_timer;
+ int wt_timeout; /* in msecs */
+ bool bwi_active;
+
+ struct timer_list se_active_timer;
+ bool se_active;
+
+ bool xch_error;
+
+ se_io_cb_t cb;
+ void *cb_context;
+};
+
+/**
+ * enum nfc_vendor_cmds - supported nfc vendor commands
+ *
+ * @FACTORY_MODE: Allow to set the driver into a mode where no secure element
+ * are activated. It does not consider any NFC_ATTR_VENDOR_DATA.
+ * @HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes command.
+ * It does not consider any NFC_ATTR_VENDOR_DATA.
+ * @HCI_DM_PUT_DATA: Allow to configure specific CLF registry as for example
+ * RF trimmings or low level drivers configurations (I2C, SPI, SWP).
+ * @HCI_DM_UPDATE_AID: Allow to configure an AID routing into the CLF routing
+ * table following RF technology, CLF mode or protocol.
+ * @HCI_DM_GET_INFO: Allow to retrieve CLF information.
+ * @HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as low
+ * level drivers configurations or RF trimmings.
+ * @HCI_DM_DIRECT_LOAD: Allow to load a firmware into the CLF. A complete
+ * packet can be more than 8KB.
+ * @HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF
+ * configuration changes without CLF power off.
+ * @HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example the
+ * white list).
+ * @HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF
+ * technology. When using this command to anti-collision is done.
+ * @LOOPBACK: Allow to echo a command and test the Dh to CLF connectivity.
+ * @HCI_DM_VDC_MEASUREMENT_VALUE: Allow to measure the field applied on the
+ * CLF antenna. A value between 0 and 0x0f is returned. 0 is maximum.
+ * @HCI_DM_FWUPD_START: Allow to put CLF into firmware update mode. It is a
+ * specific CLF command as there is no GPIO for this.
+ * @HCI_DM_FWUPD_END: Allow to complete firmware update.
+ * @HCI_DM_VDC_VALUE_COMPARISON: Allow to compare the field applied on the
+ * CLF antenna to a reference value.
+ * @MANUFACTURER_SPECIFIC: Allow to retrieve manufacturer specific data
+ * received during a NCI_CORE_INIT_CMD.
+ */
+enum nfc_vendor_cmds {
+ FACTORY_MODE,
+ HCI_CLEAR_ALL_PIPES,
+ HCI_DM_PUT_DATA,
+ HCI_DM_UPDATE_AID,
+ HCI_DM_GET_INFO,
+ HCI_DM_GET_DATA,
+ HCI_DM_DIRECT_LOAD,
+ HCI_DM_RESET,
+ HCI_GET_PARAM,
+ HCI_DM_FIELD_GENERATOR,
+ LOOPBACK,
+ HCI_DM_FWUPD_START,
+ HCI_DM_FWUPD_END,
+ HCI_DM_VDC_MEASUREMENT_VALUE,
+ HCI_DM_VDC_VALUE_COMPARISON,
+ MANUFACTURER_SPECIFIC,
+};
+
+struct st_nci_info {
+ struct llt_ndlc *ndlc;
+ unsigned long flags;
+
+ struct st_nci_se_info se_info;
+};
+
+void st_nci_remove(struct nci_dev *ndev);
+int st_nci_probe(struct llt_ndlc *ndlc, int phy_headroom,
+ int phy_tailroom, struct st_nci_se_status *se_status);
+
+int st_nci_se_init(struct nci_dev *ndev, struct st_nci_se_status *se_status);
+void st_nci_se_deinit(struct nci_dev *ndev);
+
+int st_nci_discover_se(struct nci_dev *ndev);
+int st_nci_enable_se(struct nci_dev *ndev, u32 se_idx);
+int st_nci_disable_se(struct nci_dev *ndev, u32 se_idx);
+int st_nci_se_io(struct nci_dev *ndev, u32 se_idx,
+ u8 *apdu, size_t apdu_length,
+ se_io_cb_t cb, void *cb_context);
+int st_nci_hci_load_session(struct nci_dev *ndev);
+void st_nci_hci_event_received(struct nci_dev *ndev, u8 pipe,
+ u8 event, struct sk_buff *skb);
+void st_nci_hci_cmd_received(struct nci_dev *ndev, u8 pipe, u8 cmd,
+ struct sk_buff *skb);
+
+int st_nci_vendor_cmds_init(struct nci_dev *ndev);
+
+#endif /* __LOCAL_ST_NCI_H_ */