examples: webinar: Config files to be used in the webinar

According to the configuration I will use in the webinar, I add this config
files to better exaplain gpio usage

Signed-off-by: Raul Munoz <raul.munoz@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>

3 files changed, 137 insertions, 0 deletions

diff --git a/examples/imx7_colibri_m4/board.h b/examples/imx7_colibri_m4/board.h
index d2c7e25..814b443 100644
--- a/examples/imx7_colibri_m4/board.h
+++ b/examples/imx7_colibri_m4/board.h
@@ -89,6 +89,41 @@
 #define BOARD_GPIO_KEY_IRQ_NUM                GPIO2_INT31_16_IRQn
 #define BOARD_GPIO_KEY_HANDLER                GPIO2_INT31_16_Handler
 
+
+/*             Switch 1
+ * SODIMM                BALL NAME                GPIO                ALT
+ *    133                EPDC_GDRL           GPIO02_26                  5
+ */
+#define BOARD_GPIO_SWITCH1_RDC_PDAP               rdcPdapGpio2
+#define BOARD_GPIO_SWITCH1_CONFIG                 (&gpioSwitch1)
+//#define BOARD_GPIO_KEY_IRQ_NUM                GPIO2_INT31_16_IRQn
+//#define BOARD_GPIO_KEY_HANDLER                GPIO2_INT31_16_Handler
+//#define BOARD_GPIO_KEY_CCM_CCGR               ccmCcgrGateGpio2
+
+
+/*             LED 1
+ * SODIMM                BALL NAME                GPIO                ALT
+ *    127               EPDC_SDCE2           GPIO02_22                  5
+ */
+#define BOARD_GPIO_LED1_RDC_PDAP               rdcPdapGpio2
+#define BOARD_GPIO_LED1_CONFIG                 (&gpioLed1)
+
+ /*             Switch 2
+  * SODIMM                BALL NAME                GPIO                ALT
+  *    107                 EPDC_D15           GPIO02_15                  5
+  */
+#define BOARD_GPIO_SWITCH2_RDC_PDAP               rdcPdapGpio2
+#define BOARD_GPIO_SWITCH2_CONFIG                 (&gpioSwitch2)
+//#define BOARD_GPIO_KEY_IRQ_NUM                GPIO2_INT31_16_IRQn
+//#define BOARD_GPIO_KEY_HANDLER                GPIO2_INT31_16_Handler
+
+  /*             LED 2
+   * SODIMM                BALL NAME                GPIO                ALT
+   *    105                 EPDC_D10           GPIO02_10                  5
+   */
+#define BOARD_GPIO_LED2_RDC_PDAP               rdcPdapGpio2
+#define BOARD_GPIO_LED2_CONFIG                 (&gpioLed2)
+
 /* Colibri SPI is ECSPI3 */
 #define BOARD_ECSPI_RDC_PDAP                  rdcPdapEcspi3
 #define BOARD_ECSPI_CCM_ROOT                  ccmRootEcspi3
diff --git a/examples/imx7_colibri_m4/gpio_pins.c b/examples/imx7_colibri_m4/gpio_pins.c
index f500963..bd18d38 100644
--- a/examples/imx7_colibri_m4/gpio_pins.c
+++ b/examples/imx7_colibri_m4/gpio_pins.c
@@ -30,6 +30,9 @@
 
 #include <assert.h>
 #include "gpio_pins.h"
+#include "board.h"
+#include "gpio_ctrl.h"
+#include "gpio_imx.h"
 
 gpio_config_t gpioLed = {
     "EXT_IO0 LED",                      /* name */
@@ -65,6 +68,93 @@ gpio_config_t gpioKeyFunc2 = {
     22                                              /* pin */
 };
 
+
+/* Switch 1
+ * SODIMM                BALL NAME                GPIO                ALT
+ *    133                EPDC_GDRL           GPIO02_26                  5
+ */
+gpio_config_t gpioSwitch1 = {
+    "SODIMM 133",                                      /* name */
+    &IOMUXC_SW_MUX_CTL_PAD_EPDC_GDRL,               /* muxReg */
+    5,                                              /* muxConfig */
+    &IOMUXC_SW_PAD_CTL_PAD_EPDC_GDRL,               /* padReg */
+    IOMUXC_SW_PAD_CTL_PAD_EPDC_GDRL_PS(2)  |        /* padConfig */
+    	IOMUXC_SW_PAD_CTL_PAD_EPDC_GDRL_PE_MASK |
+    IOMUXC_SW_PAD_CTL_PAD_EPDC_GDRL_HYS_MASK,
+    GPIO2,                                          /* base */
+    26                                              /* pin */
+};
+gpio_init_config_t Switch1 = {
+    .pin           = 26, //pin number
+    .direction     = gpioDigitalInput,
+    .interruptMode = gpioNoIntmode
+};
+
+/* LED 1
+ * SODIMM                BALL NAME                GPIO                ALT
+ *    127               EPDC_SDCE2           GPIO02_22                  5
+ */
+gpio_config_t gpioLed1 = {
+    "SODIMM 127",                                       /* name */
+    &IOMUXC_SW_MUX_CTL_PAD_EPDC_SDCE2,               /* muxReg */
+    5,                                              /* muxConfig */
+    &IOMUXC_SW_PAD_CTL_PAD_EPDC_SDCE2,                  /* padReg */
+    IOMUXC_SW_PAD_CTL_PAD_EPDC_SDCE2_PS(2) |        /* padConfig */
+        IOMUXC_SW_PAD_CTL_PAD_EPDC_SDCE2_PE_MASK |
+	IOMUXC_SW_PAD_CTL_PAD_EPDC_SDCE2_HYS_MASK,
+    GPIO2,                                          /* base */
+    22                                              /* pin */
+};
+gpio_init_config_t Led1 = {
+    .pin           = 22, //pin number
+    .direction     = gpioDigitalOutput,
+    .interruptMode = gpioNoIntmode
+};
+
+
+/* Switch 2
+ * SODIMM                BALL NAME                GPIO                ALT
+ *    107                 EPDC_DATA15           GPIO02_15                  5
+ */
+gpio_config_t gpioSwitch2 = {
+    "SODIMM 107",                                      /* name */
+    &IOMUXC_SW_MUX_CTL_PAD_EPDC_DATA15,               /* muxReg */
+    5,                                              /* muxConfig */
+    &IOMUXC_SW_PAD_CTL_PAD_EPDC_DATA15,               /* padReg */
+    IOMUXC_SW_PAD_CTL_PAD_EPDC_DATA15_PS(2)  |        /* padConfig */
+    	IOMUXC_SW_PAD_CTL_PAD_EPDC_DATA15_PE_MASK |
+    IOMUXC_SW_PAD_CTL_PAD_EPDC_DATA15_HYS_MASK,
+    GPIO2,                                          /* base */
+    15                                              /* pin */
+};
+gpio_init_config_t Switch2 = {
+    .pin           = 15, //pin number
+    .direction     = gpioDigitalInput,
+    .interruptMode = gpioNoIntmode
+};
+
+/* LED 2
+ * SODIMM                BALL NAME                GPIO                ALT
+ *    105                 EPDC_DATA10           GPIO02_10                  5
+ */
+gpio_config_t gpioLed2 = {
+    "SODIMM 105",                                       /* name */
+    &IOMUXC_SW_MUX_CTL_PAD_EPDC_DATA10,               /* muxReg */
+    5,                                              /* muxConfig */
+    &IOMUXC_SW_PAD_CTL_PAD_EPDC_DATA10,                  /* padReg */
+    IOMUXC_SW_PAD_CTL_PAD_EPDC_DATA10_PS(2) |        /* padConfig */
+        IOMUXC_SW_PAD_CTL_PAD_EPDC_DATA10_PE_MASK |
+	IOMUXC_SW_PAD_CTL_PAD_EPDC_DATA10_HYS_MASK,
+    GPIO2,                                          /* base */
+    10                                              /* pin */
+};
+
+gpio_init_config_t Led2 = {
+    .pin           = 10, //pin number
+    .direction     = gpioDigitalOutput,
+    .interruptMode = gpioNoIntmode
+};
+
 void configure_gpio_pin(gpio_config_t *config)
 {
     assert(config);
diff --git a/examples/imx7_colibri_m4/gpio_pins.h b/examples/imx7_colibri_m4/gpio_pins.h
index 0994193..93cd07c 100644
--- a/examples/imx7_colibri_m4/gpio_pins.h
+++ b/examples/imx7_colibri_m4/gpio_pins.h
@@ -32,6 +32,8 @@
 #define __GPIO_PINS_H__
 
 #include "device_imx.h"
+#include "gpio_imx.h"
+
 
 /*! @brief i.MX GPIO initialize structure. */
 typedef struct _gpio_config
@@ -54,6 +56,16 @@ extern gpio_config_t gpioLed;
 extern gpio_config_t gpioKeyFunc1;
 extern gpio_config_t gpioKeyFunc2;
 
+extern gpio_config_t gpioSwitch1;
+extern gpio_config_t gpioLed1;
+extern gpio_config_t gpioSwitch2;
+extern gpio_config_t gpioLed2;
+
+extern gpio_init_config_t Switch1;
+extern gpio_init_config_t Led1;
+extern gpio_init_config_t Switch2;
+extern gpio_init_config_t Led2;
+
 /*! @brief Configure specific GPIO pin */
 void configure_gpio_pin(gpio_config_t *config);