diff options
| -rw-r--r-- | plat/ti/k3/common/drivers/ti_sci/ti_sci.c | 81 | ||||
| -rw-r--r-- | plat/ti/k3/common/drivers/ti_sci/ti_sci.h | 9 | ||||
| -rw-r--r-- | plat/ti/k3/common/drivers/ti_sci/ti_sci_protocol.h | 49 |
3 files changed, 139 insertions, 0 deletions
diff --git a/plat/ti/k3/common/drivers/ti_sci/ti_sci.c b/plat/ti/k3/common/drivers/ti_sci/ti_sci.c index b211bdf6..f6d71a0a 100644 --- a/plat/ti/k3/common/drivers/ti_sci/ti_sci.c +++ b/plat/ti/k3/common/drivers/ti_sci/ti_sci.c @@ -1459,6 +1459,87 @@ int ti_sci_proc_get_boot_status(uint8_t proc_id, uint64_t *bv, } /** + * ti_sci_proc_wait_boot_status() - Wait for a processor boot status + * + * @proc_id: Processor ID this request is for + * @num_wait_iterations Total number of iterations we will check before + * we will timeout and give up + * @num_match_iterations How many iterations should we have continued + * status to account for status bits glitching. + * This is to make sure that match occurs for + * consecutive checks. This implies that the + * worst case should consider that the stable + * time should at the worst be num_wait_iterations + * num_match_iterations to prevent timeout. + * @delay_per_iteration_us Specifies how long to wait (in micro seconds) + * between each status checks. This is the minimum + * duration, and overhead of register reads and + * checks are on top of this and can vary based on + * varied conditions. + * @delay_before_iterations_us Specifies how long to wait (in micro seconds) + * before the very first check in the first + * iteration of status check loop. This is the + * minimum duration, and overhead of register + * reads and checks are. + * @status_flags_1_set_all_wait If non-zero, Specifies that all bits of the + * status matching this field requested MUST be 1. + * @status_flags_1_set_any_wait If non-zero, Specifies that at least one of the + * bits matching this field requested MUST be 1. + * @status_flags_1_clr_all_wait If non-zero, Specifies that all bits of the + * status matching this field requested MUST be 0. + * @status_flags_1_clr_any_wait If non-zero, Specifies that at least one of the + * bits matching this field requested MUST be 0. + * + * Return: 0 if all goes well, else appropriate error message + */ +int ti_sci_proc_wait_boot_status(uint8_t proc_id, uint8_t num_wait_iterations, + uint8_t num_match_iterations, + uint8_t delay_per_iteration_us, + uint8_t delay_before_iterations_us, + uint32_t status_flags_1_set_all_wait, + uint32_t status_flags_1_set_any_wait, + uint32_t status_flags_1_clr_all_wait, + uint32_t status_flags_1_clr_any_wait) +{ + struct ti_sci_msg_req_wait_proc_boot_status req; + struct ti_sci_msg_hdr resp; + + struct ti_sci_xfer xfer; + int ret; + + ret = ti_sci_setup_one_xfer(TISCI_MSG_WAIT_PROC_BOOT_STATUS, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + &req, sizeof(req), + &resp, sizeof(resp), + &xfer); + if (ret) { + ERROR("Message alloc failed (%d)\n", ret); + return ret; + } + + req.processor_id = proc_id; + req.num_wait_iterations = num_wait_iterations; + req.num_match_iterations = num_match_iterations; + req.delay_per_iteration_us = delay_per_iteration_us; + req.delay_before_iterations_us = delay_before_iterations_us; + req.status_flags_1_set_all_wait = status_flags_1_set_all_wait; + req.status_flags_1_set_any_wait = status_flags_1_set_any_wait; + req.status_flags_1_clr_all_wait = status_flags_1_clr_all_wait; + req.status_flags_1_clr_any_wait = status_flags_1_clr_any_wait; + + ret = ti_sci_do_xfer(&xfer); + if (ret) { + ERROR("Transfer send failed (%d)\n", ret); + return ret; + } + + if (!ti_sci_is_response_ack(&resp)) + return -ENODEV; + + return 0; +} + +/** * ti_sci_init() - Basic initialization * * Return: 0 if all goes well, else appropriate error message diff --git a/plat/ti/k3/common/drivers/ti_sci/ti_sci.h b/plat/ti/k3/common/drivers/ti_sci/ti_sci.h index 1176b00f..91f86457 100644 --- a/plat/ti/k3/common/drivers/ti_sci/ti_sci.h +++ b/plat/ti/k3/common/drivers/ti_sci/ti_sci.h @@ -179,6 +179,7 @@ int ti_sci_core_reboot(void); * and then set the processor configuration flags. * @cert_addr: Memory address at which payload image certificate is located. * - ti_sci_proc_get_boot_status - Command to get the processor boot status + * - ti_sci_proc_wait_boot_status - Command to wait for a processor boot status * * NOTE: for all these functions, the following are generic in nature: * @proc_id: Processor ID @@ -197,6 +198,14 @@ int ti_sci_proc_get_boot_status(uint8_t proc_id, uint64_t *bv, uint32_t *cfg_flags, uint32_t *ctrl_flags, uint32_t *sts_flags); +int ti_sci_proc_wait_boot_status(uint8_t proc_id, uint8_t num_wait_iterations, + uint8_t num_match_iterations, + uint8_t delay_per_iteration_us, + uint8_t delay_before_iterations_us, + uint32_t status_flags_1_set_all_wait, + uint32_t status_flags_1_set_any_wait, + uint32_t status_flags_1_clr_all_wait, + uint32_t status_flags_1_clr_any_wait); /** * ti_sci_init() - Basic initialization diff --git a/plat/ti/k3/common/drivers/ti_sci/ti_sci_protocol.h b/plat/ti/k3/common/drivers/ti_sci/ti_sci_protocol.h index c6d76d7e..a921e512 100644 --- a/plat/ti/k3/common/drivers/ti_sci/ti_sci_protocol.h +++ b/plat/ti/k3/common/drivers/ti_sci/ti_sci_protocol.h @@ -46,6 +46,7 @@ #define TISCI_MSG_SET_PROC_BOOT_CTRL 0xc101 #define TISCI_MSG_PROC_AUTH_BOOT_IMIAGE 0xc120 #define TISCI_MSG_GET_PROC_BOOT_STATUS 0xc400 +#define TISCI_MSG_WAIT_PROC_BOOT_STATUS 0xc401 /** * struct ti_sci_msg_hdr - Generic Message Header for All messages and responses @@ -647,4 +648,52 @@ struct ti_sci_msg_resp_get_proc_boot_status { uint32_t status_flags; } __packed; +/** + * struct ti_sci_msg_req_wait_proc_boot_status - Wait for a processor boot status + * @hdr: Generic Header + * @processor_id: ID of processor + * @num_wait_iterations Total number of iterations we will check before + * we will timeout and give up + * @num_match_iterations How many iterations should we have continued + * status to account for status bits glitching. + * This is to make sure that match occurs for + * consecutive checks. This implies that the + * worst case should consider that the stable + * time should at the worst be num_wait_iterations + * num_match_iterations to prevent timeout. + * @delay_per_iteration_us Specifies how long to wait (in micro seconds) + * between each status checks. This is the minimum + * duration, and overhead of register reads and + * checks are on top of this and can vary based on + * varied conditions. + * @delay_before_iterations_us Specifies how long to wait (in micro seconds) + * before the very first check in the first + * iteration of status check loop. This is the + * minimum duration, and overhead of register + * reads and checks are. + * @status_flags_1_set_all_wait If non-zero, Specifies that all bits of the + * status matching this field requested MUST be 1. + * @status_flags_1_set_any_wait If non-zero, Specifies that at least one of the + * bits matching this field requested MUST be 1. + * @status_flags_1_clr_all_wait If non-zero, Specifies that all bits of the + * status matching this field requested MUST be 0. + * @status_flags_1_clr_any_wait If non-zero, Specifies that at least one of the + * bits matching this field requested MUST be 0. + * + * Request type is TISCI_MSG_WAIT_PROC_BOOT_STATUS, response is appropriate + * message, or NACK in case of inability to satisfy request. + */ +struct ti_sci_msg_req_wait_proc_boot_status { + struct ti_sci_msg_hdr hdr; + uint8_t processor_id; + uint8_t num_wait_iterations; + uint8_t num_match_iterations; + uint8_t delay_per_iteration_us; + uint8_t delay_before_iterations_us; + uint32_t status_flags_1_set_all_wait; + uint32_t status_flags_1_set_any_wait; + uint32_t status_flags_1_clr_all_wait; + uint32_t status_flags_1_clr_any_wait; +} __packed; + #endif /* TI_SCI_PROTOCOL_H */ |