summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2010-10-26 17:25:38 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2010-10-26 17:25:38 -0700
commite404f91ed2180dfecbab15dd4d39c543353385fb (patch)
treec256e29b1c738d5e5b5478f19b369b1fd90bd1e2
parent18a043f9413277523cf5011e594caa1747db4948 (diff)
parente18105c128734b1671739ad4d85e216ebec28c61 (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: convert a BUG_ON to BUILD_BUG_ON arch/tile: make ptrace() work properly for TILE-Gx COMPAT mode arch/tile: support new info op generated by compiler arch/tile: minor whitespace/naming changes for string support files arch/tile: enable single-step support for TILE-Gx arch/tile: parameterize system PLs to support KVM port arch/tile: add Tilera's <arch/sim.h> header as an open-source header arch/tile: Bomb C99 comments to C89 comments in tile's <arch/sim_def.h> arch/tile: prevent corrupt top frame from causing backtracer runaway arch/tile: various top-level Makefile cleanups arch/tile: change lower bound on syscall error return to -4095 arch/tile: properly export __mb_incoherent for modules arch/tile: provide a definition of MAP_STACK kmemleak: add TILE to the list of supported architectures. char: hvc: check for error case arch/tile: Add a warning if we try to allocate too much vmalloc memory. arch/tile: update some comments to clarify register usage. arch/tile: use better "punctuation" for VMSPLIT_3_5G and friends arch/tile: Use <asm-generic/syscalls.h> tile: replace some BUG_ON checks with BUILD_BUG_ON checks
-rw-r--r--arch/tile/Kconfig20
-rw-r--r--arch/tile/Makefile19
-rw-r--r--arch/tile/include/arch/sim.h619
-rw-r--r--arch/tile/include/arch/sim_def.h548
-rw-r--r--arch/tile/include/arch/spr_def.h85
-rw-r--r--arch/tile/include/arch/spr_def_32.h39
-rw-r--r--arch/tile/include/asm/backtrace.h5
-rw-r--r--arch/tile/include/asm/compat.h15
-rw-r--r--arch/tile/include/asm/irqflags.h64
-rw-r--r--arch/tile/include/asm/mman.h1
-rw-r--r--arch/tile/include/asm/page.h27
-rw-r--r--arch/tile/include/asm/processor.h11
-rw-r--r--arch/tile/include/asm/ptrace.h4
-rw-r--r--arch/tile/include/asm/syscalls.h73
-rw-r--r--arch/tile/include/asm/system.h14
-rw-r--r--arch/tile/include/asm/traps.h4
-rw-r--r--arch/tile/include/hv/hypervisor.h30
-rw-r--r--arch/tile/kernel/backtrace.c4
-rw-r--r--arch/tile/kernel/compat.c10
-rw-r--r--arch/tile/kernel/compat_signal.c10
-rw-r--r--arch/tile/kernel/entry.S34
-rw-r--r--arch/tile/kernel/head_32.S5
-rw-r--r--arch/tile/kernel/intvec_32.S101
-rw-r--r--arch/tile/kernel/irq.c16
-rw-r--r--arch/tile/kernel/messaging.c2
-rw-r--r--arch/tile/kernel/process.c50
-rw-r--r--arch/tile/kernel/ptrace.c78
-rw-r--r--arch/tile/kernel/regs_32.S2
-rw-r--r--arch/tile/kernel/setup.c34
-rw-r--r--arch/tile/kernel/signal.c6
-rw-r--r--arch/tile/kernel/single_step.c73
-rw-r--r--arch/tile/kernel/smp.c2
-rw-r--r--arch/tile/kernel/stack.c35
-rw-r--r--arch/tile/kernel/sys.c9
-rw-r--r--arch/tile/kernel/traps.c4
-rw-r--r--arch/tile/kvm/Kconfig38
-rw-r--r--arch/tile/lib/Makefile4
-rw-r--r--arch/tile/lib/atomic_32.c8
-rw-r--r--arch/tile/lib/exports.c3
-rw-r--r--arch/tile/lib/memcpy_32.S206
-rw-r--r--arch/tile/lib/memmove.c (renamed from arch/tile/lib/memmove_32.c)0
-rw-r--r--arch/tile/lib/memset_32.c1
-rw-r--r--arch/tile/lib/strlen_32.c2
-rw-r--r--arch/tile/mm/fault.c12
-rw-r--r--arch/tile/mm/homecache.c11
-rw-r--r--arch/tile/mm/init.c2
-rw-r--r--drivers/char/hvc_tile.c5
-rw-r--r--lib/Kconfig.debug2
48 files changed, 1612 insertions, 735 deletions
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index 1eb308cb711a..89cfee07efa9 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -96,6 +96,7 @@ config HVC_TILE
config TILE
def_bool y
+ select HAVE_KVM if !TILEGX
select GENERIC_FIND_FIRST_BIT
select GENERIC_FIND_NEXT_BIT
select USE_GENERIC_SMP_HELPERS
@@ -236,9 +237,9 @@ choice
If you are not absolutely sure what you are doing, leave this
option alone!
- config VMSPLIT_375G
+ config VMSPLIT_3_75G
bool "3.75G/0.25G user/kernel split (no kernel networking)"
- config VMSPLIT_35G
+ config VMSPLIT_3_5G
bool "3.5G/0.5G user/kernel split"
config VMSPLIT_3G
bool "3G/1G user/kernel split"
@@ -252,8 +253,8 @@ endchoice
config PAGE_OFFSET
hex
- default 0xF0000000 if VMSPLIT_375G
- default 0xE0000000 if VMSPLIT_35G
+ default 0xF0000000 if VMSPLIT_3_75G
+ default 0xE0000000 if VMSPLIT_3_5G
default 0xB0000000 if VMSPLIT_3G_OPT
default 0x80000000 if VMSPLIT_2G
default 0x40000000 if VMSPLIT_1G
@@ -314,6 +315,15 @@ config HARDWALL
bool "Hardwall support to allow access to user dynamic network"
default y
+config KERNEL_PL
+ int "Processor protection level for kernel"
+ range 1 2
+ default "1"
+ ---help---
+ This setting determines the processor protection level the
+ kernel will be built to run at. Generally you should use
+ the default value here.
+
endmenu # Tilera-specific configuration
menu "Bus options"
@@ -354,3 +364,5 @@ source "security/Kconfig"
source "crypto/Kconfig"
source "lib/Kconfig"
+
+source "arch/tile/kvm/Kconfig"
diff --git a/arch/tile/Makefile b/arch/tile/Makefile
index fd8f6bb5face..17acce70569b 100644
--- a/arch/tile/Makefile
+++ b/arch/tile/Makefile
@@ -26,8 +26,9 @@ $(error Set TILERA_ROOT or CROSS_COMPILE when building $(ARCH) on $(HOST_ARCH))
endif
endif
-
+ifneq ($(CONFIG_DEBUG_EXTRA_FLAGS),"")
KBUILD_CFLAGS += $(CONFIG_DEBUG_EXTRA_FLAGS)
+endif
LIBGCC_PATH := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
@@ -49,6 +50,20 @@ head-y := arch/tile/kernel/head_$(BITS).o
libs-y += arch/tile/lib/
libs-y += $(LIBGCC_PATH)
-
# See arch/tile/Kbuild for content of core part of the kernel
core-y += arch/tile/
+
+core-$(CONFIG_KVM) += arch/tile/kvm/
+
+ifdef TILERA_ROOT
+INSTALL_PATH ?= $(TILERA_ROOT)/tile/boot
+endif
+
+install:
+ install -D -m 755 vmlinux $(INSTALL_PATH)/vmlinux-$(KERNELRELEASE)
+ install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE)
+ install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE)
+
+define archhelp
+ echo ' install - install kernel into $(INSTALL_PATH)'
+endef
diff --git a/arch/tile/include/arch/sim.h b/arch/tile/include/arch/sim.h
new file mode 100644
index 000000000000..74b7c1624d34
--- /dev/null
+++ b/arch/tile/include/arch/sim.h
@@ -0,0 +1,619 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/**
+ * @file
+ *
+ * Provides an API for controlling the simulator at runtime.
+ */
+
+/**
+ * @addtogroup arch_sim
+ * @{
+ *
+ * An API for controlling the simulator at runtime.
+ *
+ * The simulator's behavior can be modified while it is running.
+ * For example, human-readable trace output can be enabled and disabled
+ * around code of interest.
+ *
+ * There are two ways to modify simulator behavior:
+ * programmatically, by calling various sim_* functions, and
+ * interactively, by entering commands like "sim set functional true"
+ * at the tile-monitor prompt. Typing "sim help" at that prompt provides
+ * a list of interactive commands.
+ *
+ * All interactive commands can also be executed programmatically by
+ * passing a string to the sim_command function.
+ */
+
+#ifndef __ARCH_SIM_H__
+#define __ARCH_SIM_H__
+
+#include <arch/sim_def.h>
+#include <arch/abi.h>
+
+#ifndef __ASSEMBLER__
+
+#include <arch/spr_def.h>
+
+
+/**
+ * Return true if the current program is running under a simulator,
+ * rather than on real hardware. If running on hardware, other "sim_xxx()"
+ * calls have no useful effect.
+ */
+static inline int
+sim_is_simulator(void)
+{
+ return __insn_mfspr(SPR_SIM_CONTROL) != 0;
+}
+
+
+/**
+ * Checkpoint the simulator state to a checkpoint file.
+ *
+ * The checkpoint file name is either the default or the name specified
+ * on the command line with "--checkpoint-file".
+ */
+static __inline void
+sim_checkpoint(void)
+{
+ __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_CHECKPOINT);
+}
+
+
+/**
+ * Report whether or not various kinds of simulator tracing are enabled.
+ *
+ * @return The bitwise OR of these values:
+ *
+ * SIM_TRACE_CYCLES (--trace-cycles),
+ * SIM_TRACE_ROUTER (--trace-router),
+ * SIM_TRACE_REGISTER_WRITES (--trace-register-writes),
+ * SIM_TRACE_DISASM (--trace-disasm),
+ * SIM_TRACE_STALL_INFO (--trace-stall-info)
+ * SIM_TRACE_MEMORY_CONTROLLER (--trace-memory-controller)
+ * SIM_TRACE_L2_CACHE (--trace-l2)
+ * SIM_TRACE_LINES (--trace-lines)
+ */
+static __inline unsigned int
+sim_get_tracing(void)
+{
+ return __insn_mfspr(SPR_SIM_CONTROL) & SIM_TRACE_FLAG_MASK;
+}
+
+
+/**
+ * Turn on or off different kinds of simulator tracing.
+ *
+ * @param mask Either one of these special values:
+ *
+ * SIM_TRACE_NONE (turns off tracing),
+ * SIM_TRACE_ALL (turns on all possible tracing).
+ *
+ * or the bitwise OR of these values:
+ *
+ * SIM_TRACE_CYCLES (--trace-cycles),
+ * SIM_TRACE_ROUTER (--trace-router),
+ * SIM_TRACE_REGISTER_WRITES (--trace-register-writes),
+ * SIM_TRACE_DISASM (--trace-disasm),
+ * SIM_TRACE_STALL_INFO (--trace-stall-info)
+ * SIM_TRACE_MEMORY_CONTROLLER (--trace-memory-controller)
+ * SIM_TRACE_L2_CACHE (--trace-l2)
+ * SIM_TRACE_LINES (--trace-lines)
+ */
+static __inline void
+sim_set_tracing(unsigned int mask)
+{
+ __insn_mtspr(SPR_SIM_CONTROL, SIM_TRACE_SPR_ARG(mask));
+}
+
+
+/**
+ * Request dumping of different kinds of simulator state.
+ *
+ * @param mask Either this special value:
+ *
+ * SIM_DUMP_ALL (dump all known state)
+ *
+ * or the bitwise OR of these values:
+ *
+ * SIM_DUMP_REGS (the register file),
+ * SIM_DUMP_SPRS (the SPRs),
+ * SIM_DUMP_ITLB (the iTLB),
+ * SIM_DUMP_DTLB (the dTLB),
+ * SIM_DUMP_L1I (the L1 I-cache),
+ * SIM_DUMP_L1D (the L1 D-cache),
+ * SIM_DUMP_L2 (the L2 cache),
+ * SIM_DUMP_SNREGS (the switch register file),
+ * SIM_DUMP_SNITLB (the switch iTLB),
+ * SIM_DUMP_SNL1I (the switch L1 I-cache),
+ * SIM_DUMP_BACKTRACE (the current backtrace)
+ */
+static __inline void
+sim_dump(unsigned int mask)
+{
+ __insn_mtspr(SPR_SIM_CONTROL, SIM_DUMP_SPR_ARG(mask));
+}
+
+
+/**
+ * Print a string to the simulator stdout.
+ *
+ * @param str The string to be written; a newline is automatically added.
+ */
+static __inline void
+sim_print_string(const char* str)
+{
+ int i;
+ for (i = 0; str[i] != 0; i++)
+ {
+ __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_PUTC |
+ (str[i] << _SIM_CONTROL_OPERATOR_BITS));
+ }
+ __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_PUTC |
+ (SIM_PUTC_FLUSH_STRING << _SIM_CONTROL_OPERATOR_BITS));
+}
+
+
+/**
+ * Execute a simulator command string.
+ *
+ * Type 'sim help' at the tile-monitor prompt to learn what commands
+ * are available. Note the use of the tile-monitor "sim" command to
+ * pass commands to the simulator.
+ *
+ * The argument to sim_command() does not include the leading "sim"
+ * prefix used at the tile-monitor prompt; for example, you might call
+ * sim_command("trace disasm").
+ */
+static __inline void
+sim_command(const char* str)
+{
+ int c;
+ do
+ {
+ c = *str++;
+ __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_COMMAND |
+ (c << _SIM_CONTROL_OPERATOR_BITS));
+ }
+ while (c);
+}
+
+
+
+#ifndef __DOXYGEN__
+
+/**
+ * The underlying implementation of "_sim_syscall()".
+ *
+ * We use extra "and" instructions to ensure that all the values
+ * we are passing to the simulator are actually valid in the registers
+ * (i.e. returned from memory) prior to the SIM_CONTROL spr.
+ */
+static __inline int _sim_syscall0(int val)
+{
+ long result;
+ __asm__ __volatile__ ("mtspr SIM_CONTROL, r0"
+ : "=R00" (result) : "R00" (val));
+ return result;
+}
+
+static __inline int _sim_syscall1(int val, long arg1)
+{
+ long result;
+ __asm__ __volatile__ ("{ and zero, r1, r1; mtspr SIM_CONTROL, r0 }"
+ : "=R00" (result) : "R00" (val), "R01" (arg1));
+ return result;
+}
+
+static __inline int _sim_syscall2(int val, long arg1, long arg2)
+{
+ long result;
+ __asm__ __volatile__ ("{ and zero, r1, r2; mtspr SIM_CONTROL, r0 }"
+ : "=R00" (result)
+ : "R00" (val), "R01" (arg1), "R02" (arg2));
+ return result;
+}
+
+/* Note that _sim_syscall3() and higher are technically at risk of
+ receiving an interrupt right before the mtspr bundle, in which case
+ the register values for arguments 3 and up may still be in flight
+ to the core from a stack frame reload. */
+
+static __inline int _sim_syscall3(int val, long arg1, long arg2, long arg3)
+{
+ long result;
+ __asm__ __volatile__ ("{ and zero, r3, r3 };"
+ "{ and zero, r1, r2; mtspr SIM_CONTROL, r0 }"
+ : "=R00" (result)
+ : "R00" (val), "R01" (arg1), "R02" (arg2),
+ "R03" (arg3));
+ return result;
+}
+
+static __inline int _sim_syscall4(int val, long arg1, long arg2, long arg3,
+ long arg4)
+{
+ long result;
+ __asm__ __volatile__ ("{ and zero, r3, r4 };"
+ "{ and zero, r1, r2; mtspr SIM_CONTROL, r0 }"
+ : "=R00" (result)
+ : "R00" (val), "R01" (arg1), "R02" (arg2),
+ "R03" (arg3), "R04" (arg4));
+ return result;
+}
+
+static __inline int _sim_syscall5(int val, long arg1, long arg2, long arg3,
+ long arg4, long arg5)
+{
+ long result;
+ __asm__ __volatile__ ("{ and zero, r3, r4; and zero, r5, r5 };"
+ "{ and zero, r1, r2; mtspr SIM_CONTROL, r0 }"
+ : "=R00" (result)
+ : "R00" (val), "R01" (arg1), "R02" (arg2),
+ "R03" (arg3), "R04" (arg4), "R05" (arg5));
+ return result;
+}
+
+
+/**
+ * Make a special syscall to the simulator itself, if running under
+ * simulation. This is used as the implementation of other functions
+ * and should not be used outside this file.
+ *
+ * @param syscall_num The simulator syscall number.
+ * @param nr The number of additional arguments provided.
+ *
+ * @return Varies by syscall.
+ */
+#define _sim_syscall(syscall_num, nr, args...) \
+ _sim_syscall##nr( \
+ ((syscall_num) << _SIM_CONTROL_OPERATOR_BITS) | SIM_CONTROL_SYSCALL, args)
+
+
+/* Values for the "access_mask" parameters below. */
+#define SIM_WATCHPOINT_READ 1
+#define SIM_WATCHPOINT_WRITE 2
+#define SIM_WATCHPOINT_EXECUTE 4
+
+
+static __inline int
+sim_add_watchpoint(unsigned int process_id,
+ unsigned long address,
+ unsigned long size,
+ unsigned int access_mask,
+ unsigned long user_data)
+{
+ return _sim_syscall(SIM_SYSCALL_ADD_WATCHPOINT, 5, process_id,
+ address, size, access_mask, user_data);
+}
+
+
+static __inline int
+sim_remove_watchpoint(unsigned int process_id,
+ unsigned long address,
+ unsigned long size,
+ unsigned int access_mask,
+ unsigned long user_data)
+{
+ return _sim_syscall(SIM_SYSCALL_REMOVE_WATCHPOINT, 5, process_id,
+ address, size, access_mask, user_data);
+}
+
+
+/**
+ * Return value from sim_query_watchpoint.
+ */
+struct SimQueryWatchpointStatus
+{
+ /**
+ * 0 if a watchpoint fired, 1 if no watchpoint fired, or -1 for
+ * error (meaning a bad process_id).
+ */
+ int syscall_status;
+
+ /**
+ * The address of the watchpoint that fired (this is the address
+ * passed to sim_add_watchpoint, not an address within that range
+ * that actually triggered the watchpoint).
+ */
+ unsigned long address;
+
+ /** The arbitrary user_data installed by sim_add_watchpoint. */
+ unsigned long user_data;
+};
+
+
+static __inline struct SimQueryWatchpointStatus
+sim_query_watchpoint(unsigned int process_id)
+{
+ struct SimQueryWatchpointStatus status;
+ long val = SIM_CONTROL_SYSCALL |
+ (SIM_SYSCALL_QUERY_WATCHPOINT << _SIM_CONTROL_OPERATOR_BITS);
+ __asm__ __volatile__ ("{ and zero, r1, r1; mtspr SIM_CONTROL, r0 }"
+ : "=R00" (status.syscall_status),
+ "=R01" (status.address),
+ "=R02" (status.user_data)
+ : "R00" (val), "R01" (process_id));
+ return status;
+}
+
+
+/* On the simulator, confirm lines have been evicted everywhere. */
+static __inline void
+sim_validate_lines_evicted(unsigned long long pa, unsigned long length)
+{
+#ifdef __LP64__
+ _sim_syscall(SIM_SYSCALL_VALIDATE_LINES_EVICTED, 2, pa, length);
+#else
+ _sim_syscall(SIM_SYSCALL_VALIDATE_LINES_EVICTED, 4,
+ 0 /* dummy */, (long)(pa), (long)(pa >> 32), length);
+#endif
+}
+
+
+#endif /* !__DOXYGEN__ */
+
+
+
+
+/**
+ * Modify the shaping parameters of a shim.
+ *
+ * @param shim The shim to modify. One of:
+ * SIM_CONTROL_SHAPING_GBE_0
+ * SIM_CONTROL_SHAPING_GBE_1
+ * SIM_CONTROL_SHAPING_GBE_2
+ * SIM_CONTROL_SHAPING_GBE_3
+ * SIM_CONTROL_SHAPING_XGBE_0
+ * SIM_CONTROL_SHAPING_XGBE_1
+ *
+ * @param type The type of shaping. This should be the same type of
+ * shaping that is already in place on the shim. One of:
+ * SIM_CONTROL_SHAPING_MULTIPLIER
+ * SIM_CONTROL_SHAPING_PPS
+ * SIM_CONTROL_SHAPING_BPS
+ *
+ * @param units The magnitude of the rate. One of:
+ * SIM_CONTROL_SHAPING_UNITS_SINGLE
+ * SIM_CONTROL_SHAPING_UNITS_KILO
+ * SIM_CONTROL_SHAPING_UNITS_MEGA
+ * SIM_CONTROL_SHAPING_UNITS_GIGA
+ *
+ * @param rate The rate to which to change it. This must fit in
+ * SIM_CONTROL_SHAPING_RATE_BITS bits or a warning is issued and
+ * the shaping is not changed.
+ *
+ * @return 0 if no problems were detected in the arguments to sim_set_shaping
+ * or 1 if problems were detected (for example, rate does not fit in 17 bits).
+ */
+static __inline int
+sim_set_shaping(unsigned shim,
+ unsigned type,
+ unsigned units,
+ unsigned rate)
+{
+ if ((rate & ~((1 << SIM_CONTROL_SHAPING_RATE_BITS) - 1)) != 0)
+ return 1;
+
+ __insn_mtspr(SPR_SIM_CONTROL, SIM_SHAPING_SPR_ARG(shim, type, units, rate));
+ return 0;
+}
+
+#ifdef __tilegx__
+
+/** Enable a set of mPIPE links. Pass a -1 link_mask to enable all links. */
+static __inline void
+sim_enable_mpipe_links(unsigned mpipe, unsigned long link_mask)
+{
+ __insn_mtspr(SPR_SIM_CONTROL,
+ (SIM_CONTROL_ENABLE_MPIPE_LINK_MAGIC_BYTE |
+ (mpipe << 8) | (1 << 16) | ((uint_reg_t)link_mask << 32)));
+}
+
+/** Disable a set of mPIPE links. Pass a -1 link_mask to disable all links. */
+static __inline void
+sim_disable_mpipe_links(unsigned mpipe, unsigned long link_mask)
+{
+ __insn_mtspr(SPR_SIM_CONTROL,
+ (SIM_CONTROL_ENABLE_MPIPE_LINK_MAGIC_BYTE |
+ (mpipe << 8) | (0 << 16) | ((uint_reg_t)link_mask << 32)));
+}
+
+#endif /* __tilegx__ */
+
+
+/*
+ * An API for changing "functional" mode.
+ */
+
+#ifndef __DOXYGEN__
+
+#define sim_enable_functional() \
+ __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_ENABLE_FUNCTIONAL)
+
+#define sim_disable_functional() \
+ __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_DISABLE_FUNCTIONAL)
+
+#endif /* __DOXYGEN__ */
+
+
+/*
+ * Profiler support.
+ */
+
+/**
+ * Turn profiling on for the current task.
+ *
+ * Note that this has no effect if run in an environment without
+ * profiling support (thus, the proper flags to the simulator must
+ * be supplied).
+ */
+static __inline void
+sim_profiler_enable(void)
+{
+ __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_PROFILER_ENABLE);
+}
+
+
+/** Turn profiling off for the current task. */
+static __inline void
+sim_profiler_disable(void)
+{
+ __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_PROFILER_DISABLE);
+}
+
+
+/**
+ * Turn profiling on or off for the current task.
+ *
+ * @param enabled If true, turns on profiling. If false, turns it off.
+ *
+ * Note that this has no effect if run in an environment without
+ * profiling support (thus, the proper flags to the simulator must
+ * be supplied).
+ */
+static __inline void
+sim_profiler_set_enabled(int enabled)
+{
+ int val =
+ enabled ? SIM_CONTROL_PROFILER_ENABLE : SIM_CONTROL_PROFILER_DISABLE;
+ __insn_mtspr(SPR_SIM_CONTROL, val);
+}
+
+
+/**
+ * Return true if and only if profiling is currently enabled
+ * for the current task.
+ *
+ * This returns false even if sim_profiler_enable() was called
+ * if the current execution environment does not support profiling.
+ */
+static __inline int
+sim_profiler_is_enabled(void)
+{
+ return ((__insn_mfspr(SPR_SIM_CONTROL) & SIM_PROFILER_ENABLED_MASK) != 0);
+}
+
+
+/**
+ * Reset profiling counters to zero for the current task.
+ *
+ * Resetting can be done while profiling is enabled. It does not affect
+ * the chip-wide profiling counters.
+ */
+static __inline void
+sim_profiler_clear(void)
+{
+ __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_PROFILER_CLEAR);
+}
+
+
+/**
+ * Enable specified chip-level profiling counters.
+ *
+ * Does not affect the per-task profiling counters.
+ *
+ * @param mask Either this special value:
+ *
+ * SIM_CHIP_ALL (enables all chip-level components).
+ *
+ * or the bitwise OR of these values:
+ *
+ * SIM_CHIP_MEMCTL (enable all memory controllers)
+ * SIM_CHIP_XAUI (enable all XAUI controllers)
+ * SIM_CHIP_MPIPE (enable all MPIPE controllers)
+ */
+static __inline void
+sim_profiler_chip_enable(unsigned int mask)
+{
+ __insn_mtspr(SPR_SIM_CONTROL, SIM_PROFILER_CHIP_ENABLE_SPR_ARG(mask));
+}
+
+
+/**
+ * Disable specified chip-level profiling counters.
+ *
+ * Does not affect the per-task profiling counters.
+ *
+ * @param mask Either this special value:
+ *
+ * SIM_CHIP_ALL (disables all chip-level components).
+ *
+ * or the bitwise OR of these values:
+ *
+ * SIM_CHIP_MEMCTL (disable all memory controllers)
+ * SIM_CHIP_XAUI (disable all XAUI controllers)
+ * SIM_CHIP_MPIPE (disable all MPIPE controllers)
+ */
+static __inline void
+sim_profiler_chip_disable(unsigned int mask)
+{
+ __insn_mtspr(SPR_SIM_CONTROL, SIM_PROFILER_CHIP_DISABLE_SPR_ARG(mask));
+}
+
+
+/**
+ * Reset specified chip-level profiling counters to zero.
+ *
+ * Does not affect the per-task profiling counters.
+ *
+ * @param mask Either this special value:
+ *
+ * SIM_CHIP_ALL (clears all chip-level components).
+ *
+ * or the bitwise OR of these values:
+ *
+ * SIM_CHIP_MEMCTL (clear all memory controllers)
+ * SIM_CHIP_XAUI (clear all XAUI controllers)
+ * SIM_CHIP_MPIPE (clear all MPIPE controllers)
+ */
+static __inline void
+sim_profiler_chip_clear(unsigned int mask)
+{
+ __insn_mtspr(SPR_SIM_CONTROL, SIM_PROFILER_CHIP_CLEAR_SPR_ARG(mask));
+}
+
+
+/*
+ * Event support.
+ */
+
+#ifndef __DOXYGEN__
+
+static __inline void
+sim_event_begin(unsigned int x)
+{
+#if defined(__tile__) && !defined(__NO_EVENT_SPR__)
+ __insn_mtspr(SPR_EVENT_BEGIN, x);
+#endif
+}
+
+static __inline void
+sim_event_end(unsigned int x)
+{
+#if defined(__tile__) && !defined(__NO_EVENT_SPR__)
+ __insn_mtspr(SPR_EVENT_END, x);
+#endif
+}
+
+#endif /* !__DOXYGEN__ */
+
+#endif /* !__ASSEMBLER__ */
+
+#endif /* !__ARCH_SIM_H__ */
+
+/** @} */
diff --git a/arch/tile/include/arch/sim_def.h b/arch/tile/include/arch/sim_def.h
index 6418fbde063e..7a17082c3773 100644
--- a/arch/tile/include/arch/sim_def.h
+++ b/arch/tile/include/arch/sim_def.h
@@ -1,477 +1,461 @@
-// Copyright 2010 Tilera Corporation. All Rights Reserved.
-//
-// This program is free software; you can redistribute it and/or
-// modify it under the terms of the GNU General Public License
-// as published by the Free Software Foundation, version 2.
-//
-// This program is distributed in the hope that it will be useful, but
-// WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
-// NON INFRINGEMENT. See the GNU General Public License for
-// more details.
-
-//! @file
-//!
-//! Some low-level simulator definitions.
-//!
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/**
+ * @file
+ *
+ * Some low-level simulator definitions.
+ */
#ifndef __ARCH_SIM_DEF_H__
#define __ARCH_SIM_DEF_H__
-//! Internal: the low bits of the SIM_CONTROL_* SPR values specify
-//! the operation to perform, and the remaining bits are
-//! an operation-specific parameter (often unused).
-//!
+/**
+ * Internal: the low bits of the SIM_CONTROL_* SPR values specify
+ * the operation to perform, and the remaining bits are
+ * an operation-specific parameter (often unused).
+ */
#define _SIM_CONTROL_OPERATOR_BITS 8
-//== Values which can be written to SPR_SIM_CONTROL.
+/*
+ * Values which can be written to SPR_SIM_CONTROL.
+ */
-//! If written to SPR_SIM_CONTROL, stops profiling.
-//!
+/** If written to SPR_SIM_CONTROL, stops profiling. */
#define SIM_CONTROL_PROFILER_DISABLE 0
-//! If written to SPR_SIM_CONTROL, starts profiling.
-//!
+/** If written to SPR_SIM_CONTROL, starts profiling. */
#define SIM_CONTROL_PROFILER_ENABLE 1
-//! If written to SPR_SIM_CONTROL, clears profiling counters.
-//!
+/** If written to SPR_SIM_CONTROL, clears profiling counters. */
#define SIM_CONTROL_PROFILER_CLEAR 2
-//! If written to SPR_SIM_CONTROL, checkpoints the simulator.
-//!
+/** If written to SPR_SIM_CONTROL, checkpoints the simulator. */
#define SIM_CONTROL_CHECKPOINT 3
-//! If written to SPR_SIM_CONTROL, combined with a mask (shifted by 8),
-//! sets the tracing mask to the given mask. See "sim_set_tracing()".
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with a mask (shifted by 8),
+ * sets the tracing mask to the given mask. See "sim_set_tracing()".
+ */
#define SIM_CONTROL_SET_TRACING 4
-//! If written to SPR_SIM_CONTROL, combined with a mask (shifted by 8),
-//! dumps the requested items of machine state to the log.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with a mask (shifted by 8),
+ * dumps the requested items of machine state to the log.
+ */
#define SIM_CONTROL_DUMP 5
-//! If written to SPR_SIM_CONTROL, clears chip-level profiling counters.
-//!
+/** If written to SPR_SIM_CONTROL, clears chip-level profiling counters. */
#define SIM_CONTROL_PROFILER_CHIP_CLEAR 6
-//! If written to SPR_SIM_CONTROL, disables chip-level profiling.
-//!
+/** If written to SPR_SIM_CONTROL, disables chip-level profiling. */
#define SIM_CONTROL_PROFILER_CHIP_DISABLE 7
-//! If written to SPR_SIM_CONTROL, enables chip-level profiling.
-//!
+/** If written to SPR_SIM_CONTROL, enables chip-level profiling. */
#define SIM_CONTROL_PROFILER_CHIP_ENABLE 8
-//! If written to SPR_SIM_CONTROL, enables chip-level functional mode
-//!
+/** If written to SPR_SIM_CONTROL, enables chip-level functional mode */
#define SIM_CONTROL_ENABLE_FUNCTIONAL 9
-//! If written to SPR_SIM_CONTROL, disables chip-level functional mode.
-//!
+/** If written to SPR_SIM_CONTROL, disables chip-level functional mode. */
#define SIM_CONTROL_DISABLE_FUNCTIONAL 10
-//! If written to SPR_SIM_CONTROL, enables chip-level functional mode.
-//! All tiles must perform this write for functional mode to be enabled.
-//! Ignored in naked boot mode unless --functional is specified.
-//! WARNING: Only the hypervisor startup code should use this!
-//!
+/**
+ * If written to SPR_SIM_CONTROL, enables chip-level functional mode.
+ * All tiles must perform this write for functional mode to be enabled.
+ * Ignored in naked boot mode unless --functional is specified.
+ * WARNING: Only the hypervisor startup code should use this!
+ */
#define SIM_CONTROL_ENABLE_FUNCTIONAL_BARRIER 11
-//! If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
-//! writes a string directly to the simulator output. Written to once for
-//! each character in the string, plus a final NUL. Instead of NUL,
-//! you can also use "SIM_PUTC_FLUSH_STRING" or "SIM_PUTC_FLUSH_BINARY".
-//!
-// ISSUE: Document the meaning of "newline", and the handling of NUL.
-//
+/**
+ * If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
+ * writes a string directly to the simulator output. Written to once for
+ * each character in the string, plus a final NUL. Instead of NUL,
+ * you can also use "SIM_PUTC_FLUSH_STRING" or "SIM_PUTC_FLUSH_BINARY".
+ */
+/* ISSUE: Document the meaning of "newline", and the handling of NUL. */
#define SIM_CONTROL_PUTC 12
-//! If written to SPR_SIM_CONTROL, clears the --grind-coherence state for
-//! this core. This is intended to be used before a loop that will
-//! invalidate the cache by loading new data and evicting all current data.
-//! Generally speaking, this API should only be used by system code.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, clears the --grind-coherence state for
+ * this core. This is intended to be used before a loop that will
+ * invalidate the cache by loading new data and evicting all current data.
+ * Generally speaking, this API should only be used by system code.
+ */
#define SIM_CONTROL_GRINDER_CLEAR 13
-//! If written to SPR_SIM_CONTROL, shuts down the simulator.
-//!
+/** If written to SPR_SIM_CONTROL, shuts down the simulator. */
#define SIM_CONTROL_SHUTDOWN 14
-//! If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
-//! indicates that a fork syscall just created the given process.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
+ * indicates that a fork syscall just created the given process.
+ */
#define SIM_CONTROL_OS_FORK 15
-//! If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
-//! indicates that an exit syscall was just executed by the given process.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
+ * indicates that an exit syscall was just executed by the given process.
+ */
#define SIM_CONTROL_OS_EXIT 16
-//! If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
-//! indicates that the OS just switched to the given process.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
+ * indicates that the OS just switched to the given process.
+ */
#define SIM_CONTROL_OS_SWITCH 17
-//! If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
-//! indicates that an exec syscall was just executed. Written to once for
-//! each character in the executable name, plus a final NUL.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
+ * indicates that an exec syscall was just executed. Written to once for
+ * each character in the executable name, plus a final NUL.
+ */
#define SIM_CONTROL_OS_EXEC 18
-//! If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
-//! indicates that an interpreter (PT_INTERP) was loaded. Written to once
-//! for each character in "ADDR:PATH", plus a final NUL, where "ADDR" is a
-//! hex load address starting with "0x", and "PATH" is the executable name.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
+ * indicates that an interpreter (PT_INTERP) was loaded. Written to once
+ * for each character in "ADDR:PATH", plus a final NUL, where "ADDR" is a
+ * hex load address starting with "0x", and "PATH" is the executable name.
+ */
#define SIM_CONTROL_OS_INTERP 19
-//! If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
-//! indicates that a dll was loaded. Written to once for each character
-//! in "ADDR:PATH", plus a final NUL, where "ADDR" is a hexadecimal load
-//! address starting with "0x", and "PATH" is the executable name.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
+ * indicates that a dll was loaded. Written to once for each character
+ * in "ADDR:PATH", plus a final NUL, where "ADDR" is a hexadecimal load
+ * address starting with "0x", and "PATH" is the executable name.
+ */
#define SIM_CONTROL_DLOPEN 20
-//! If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
-//! indicates that a dll was unloaded. Written to once for each character
-//! in "ADDR", plus a final NUL, where "ADDR" is a hexadecimal load
-//! address starting with "0x".
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
+ * indicates that a dll was unloaded. Written to once for each character
+ * in "ADDR", plus a final NUL, where "ADDR" is a hexadecimal load
+ * address starting with "0x".
+ */
#define SIM_CONTROL_DLCLOSE 21
-//! If written to SPR_SIM_CONTROL, combined with a flag (shifted by 8),
-//! indicates whether to allow data reads to remotely-cached
-//! dirty cache lines to be cached locally without grinder warnings or
-//! assertions (used by Linux kernel fast memcpy).
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with a flag (shifted by 8),
+ * indicates whether to allow data reads to remotely-cached
+ * dirty cache lines to be cached locally without grinder warnings or
+ * assertions (used by Linux kernel fast memcpy).
+ */
#define SIM_CONTROL_ALLOW_MULTIPLE_CACHING 22
-//! If written to SPR_SIM_CONTROL, enables memory tracing.
-//!
+/** If written to SPR_SIM_CONTROL, enables memory tracing. */
#define SIM_CONTROL_ENABLE_MEM_LOGGING 23
-//! If written to SPR_SIM_CONTROL, disables memory tracing.
-//!
+/** If written to SPR_SIM_CONTROL, disables memory tracing. */
#define SIM_CONTROL_DISABLE_MEM_LOGGING 24
-//! If written to SPR_SIM_CONTROL, changes the shaping parameters of one of
-//! the gbe or xgbe shims. Must specify the shim id, the type, the units, and
-//! the rate, as defined in SIM_SHAPING_SPR_ARG.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, changes the shaping parameters of one of
+ * the gbe or xgbe shims. Must specify the shim id, the type, the units, and
+ * the rate, as defined in SIM_SHAPING_SPR_ARG.
+ */
#define SIM_CONTROL_SHAPING 25
-//! If written to SPR_SIM_CONTROL, combined with character (shifted by 8),
-//! requests that a simulator command be executed. Written to once for each
-//! character in the command, plus a final NUL.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with character (shifted by 8),
+ * requests that a simulator command be executed. Written to once for each
+ * character in the command, plus a final NUL.
+ */
#define SIM_CONTROL_COMMAND 26
-//! If written to SPR_SIM_CONTROL, indicates that the simulated system
-//! is panicking, to allow debugging via --debug-on-panic.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, indicates that the simulated system
+ * is panicking, to allow debugging via --debug-on-panic.
+ */
#define SIM_CONTROL_PANIC 27
-//! If written to SPR_SIM_CONTROL, triggers a simulator syscall.
-//! See "sim_syscall()" for more info.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, triggers a simulator syscall.
+ * See "sim_syscall()" for more info.
+ */
#define SIM_CONTROL_SYSCALL 32
-//! If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
-//! provides the pid that subsequent SIM_CONTROL_OS_FORK writes should
-//! use as the pid, rather than the default previous SIM_CONTROL_OS_SWITCH.
-//!
+/**
+ * If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
+ * provides the pid that subsequent SIM_CONTROL_OS_FORK writes should
+ * use as the pid, rather than the default previous SIM_CONTROL_OS_SWITCH.
+ */
#define SIM_CONTROL_OS_FORK_PARENT 33
-//! If written to SPR_SIM_CONTROL, combined with a mPIPE shim number
-//! (shifted by 8), clears the pending magic data section. The cleared
-//! pending magic data section and any subsequently appended magic bytes
-//! will only take effect when the classifier blast programmer is run.
+/**
+ * If written to SPR_SIM_CONTROL, combined with a mPIPE shim number
+ * (shifted by 8), clears the pending magic data section. The cleared
+ * pending magic data section and any subsequently appended magic bytes
+ * will only take effect when the classifier blast programmer is run.
+ */
#define SIM_CONTROL_CLEAR_MPIPE_MAGIC_BYTES 34
-//! If written to SPR_SIM_CONTROL, combined with a mPIPE shim number
-//! (shifted by 8) and a byte of data (shifted by 16), appends that byte
-//! to the shim's pending magic data section. The pending magic data
-//! section takes effect when the classifier blast programmer is run.
+/**
+ * If written to SPR_SIM_CONTROL, combined with a mPIPE shim number
+ * (shifted by 8) and a byte of data (shifted by 16), appends that byte
+ * to the shim's pending magic data section. The pending magic data
+ * section takes effect when the classifier blast programmer is run.
+ */
#define SIM_CONTROL_APPEND_MPIPE_MAGIC_BYTE 35
-//! If written to SPR_SIM_CONTROL, combined with a mPIPE shim number
-//! (shifted by 8), an enable=1/disable=0 bit (shifted by 16), and a
-//! mask of links (shifted by 32), enable or disable the corresponding
-//! mPIPE links.
+/**
+ * If written to SPR_SIM_CONTROL, combined with a mPIPE shim number
+ * (shifted by 8), an enable=1/disable=0 bit (shifted by 16), and a
+ * mask of links (shifted by 32), enable or disable the corresponding
+ * mPIPE links.
+ */
#define SIM_CONTROL_ENABLE_MPIPE_LINK_MAGIC_BYTE 36
-//== Syscall numbers for use with "sim_syscall()".
-//! Syscall number for sim_add_watchpoint().
-//!
+/*
+ * Syscall numbers for use with "sim_syscall()".
+ */
+
+/** Syscall number for sim_add_watchpoint(). */
#define SIM_SYSCALL_ADD_WATCHPOINT 2
-//! Syscall number for sim_remove_watchpoint().
-//!
+/** Syscall number for sim_remove_watchpoint(). */
#define SIM_SYSCALL_REMOVE_WATCHPOINT 3
-//! Syscall number for sim_query_watchpoint().
-//!
+/** Syscall number for sim_query_watchpoint(). */
#define SIM_SYSCALL_QUERY_WATCHPOINT 4
-//! Syscall number that asserts that the cache lines whose 64-bit PA
-//! is passed as the second argument to sim_syscall(), and over a
-//! range passed as the third argument, are no longer in cache.
-//! The simulator raises an error if this is not the case.
-//!
+/**
+ * Syscall number that asserts that the cache lines whose 64-bit PA
+ * is passed as the second argument to sim_syscall(), and over a
+ * range passed as the third argument, are no longer in cache.
+ * The simulator raises an error if this is not the case.
+ */
#define SIM_SYSCALL_VALIDATE_LINES_EVICTED 5
-//== Bit masks which can be shifted by 8, combined with
-//== SIM_CONTROL_SET_TRACING, and written to SPR_SIM_CONTROL.
+/*
+ * Bit masks which can be shifted by 8, combined with
+ * SIM_CONTROL_SET_TRACING, and written to SPR_SIM_CONTROL.
+ */
-//! @addtogroup arch_sim
-//! @{
+/**
+ * @addtogroup arch_sim
+ * @{
+ */
-//! Enable --trace-cycle when passed to simulator_set_tracing().
-//!
+/** Enable --trace-cycle when passed to simulator_set_tracing(). */
#define SIM_TRACE_CYCLES 0x01
-//! Enable --trace-router when passed to simulator_set_tracing().
-//!
+/** Enable --trace-router when passed to simulator_set_tracing(). */
#define SIM_TRACE_ROUTER 0x02
-//! Enable --trace-register-writes when passed to simulator_set_tracing().
-//!
+/** Enable --trace-register-writes when passed to simulator_set_tracing(). */
#define SIM_TRACE_REGISTER_WRITES 0x04
-//! Enable --trace-disasm when passed to simulator_set_tracing().
-//!
+/** Enable --trace-disasm when passed to simulator_set_tracing(). */
#define SIM_TRACE_DISASM 0x08
-//! Enable --trace-stall-info when passed to simulator_set_tracing().
-//!
+/** Enable --trace-stall-info when passed to simulator_set_tracing(). */
#define SIM_TRACE_STALL_INFO 0x10
-//! Enable --trace-memory-controller when passed to simulator_set_tracing().
-//!
+/** Enable --trace-memory-controller when passed to simulator_set_tracing(). */
#define SIM_TRACE_MEMORY_CONTROLLER 0x20
-//! Enable --trace-l2 when passed to simulator_set_tracing().
-//!
+/** Enable --trace-l2 when passed to simulator_set_tracing(). */
#define SIM_TRACE_L2_CACHE 0x40
-//! Enable --trace-lines when passed to simulator_set_tracing().
-//!
+/** Enable --trace-lines when passed to simulator_set_tracing(). */
#define SIM_TRACE_LINES 0x80
-//! Turn off all tracing when passed to simulator_set_tracing().
-//!
+/** Turn off all tracing when passed to simulator_set_tracing(). */
#define SIM_TRACE_NONE 0
-//! Turn on all tracing when passed to simulator_set_tracing().
-//!
+/** Turn on all tracing when passed to simulator_set_tracing(). */
#define SIM_TRACE_ALL (-1)
-//! @}
+/** @} */
-//! Computes the value to write to SPR_SIM_CONTROL to set tracing flags.
-//!
+/** Computes the value to write to SPR_SIM_CONTROL to set tracing flags. */
#define SIM_TRACE_SPR_ARG(mask) \
(SIM_CONTROL_SET_TRACING | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
-//== Bit masks which can be shifted by 8, combined with
-//== SIM_CONTROL_DUMP, and written to SPR_SIM_CONTROL.
+/*
+ * Bit masks which can be shifted by 8, combined with
+ * SIM_CONTROL_DUMP, and written to SPR_SIM_CONTROL.
+ */
-//! @addtogroup arch_sim
-//! @{
+/**
+ * @addtogroup arch_sim
+ * @{
+ */
-//! Dump the general-purpose registers.
-//!
+/** Dump the general-purpose registers. */
#define SIM_DUMP_REGS 0x001
-//! Dump the SPRs.
-//!
+/** Dump the SPRs. */
#define SIM_DUMP_SPRS 0x002
-//! Dump the ITLB.
-//!
+/** Dump the ITLB. */
#define SIM_DUMP_ITLB 0x004
-//! Dump the DTLB.
-//!
+/** Dump the DTLB. */
#define SIM_DUMP_DTLB 0x008
-//! Dump the L1 I-cache.
-//!
+/** Dump the L1 I-cache. */
#define SIM_DUMP_L1I 0x010
-//! Dump the L1 D-cache.
-//!
+/** Dump the L1 D-cache. */
#define SIM_DUMP_L1D 0x020
-//! Dump the L2 cache.
-//!
+/** Dump the L2 cache. */
#define SIM_DUMP_L2 0x040
-//! Dump the switch registers.
-//!
+/** Dump the switch registers. */
#define SIM_DUMP_SNREGS 0x080
-//! Dump the switch ITLB.
-//!
+/** Dump the switch ITLB. */
#define SIM_DUMP_SNITLB 0x100
-//! Dump the switch L1 I-cache.
-//!
+/** Dump the switch L1 I-cache. */
#define SIM_DUMP_SNL1I 0x200
-//! Dump the current backtrace.
-//!
+/** Dump the current backtrace. */
#define SIM_DUMP_BACKTRACE 0x400
-//! Only dump valid lines in caches.
-//!
+/** Only dump valid lines in caches. */
#define SIM_DUMP_VALID_LINES 0x800
-//! Dump everything that is dumpable.
-//!
+/** Dump everything that is dumpable. */
#define SIM_DUMP_ALL (-1 & ~SIM_DUMP_VALID_LINES)
-// @}
+/** @} */
-//! Computes the value to write to SPR_SIM_CONTROL to dump machine state.
-//!
+/** Computes the value to write to SPR_SIM_CONTROL to dump machine state. */
#define SIM_DUMP_SPR_ARG(mask) \
(SIM_CONTROL_DUMP | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
-//== Bit masks which can be shifted by 8, combined with
-//== SIM_CONTROL_PROFILER_CHIP_xxx, and written to SPR_SIM_CONTROL.
+/*
+ * Bit masks which can be shifted by 8, combined with
+ * SIM_CONTROL_PROFILER_CHIP_xxx, and written to SPR_SIM_CONTROL.
+ */
-//! @addtogroup arch_sim
-//! @{
+/**
+ * @addtogroup arch_sim
+ * @{
+ */
-//! Use with with SIM_PROFILER_CHIP_xxx to control the memory controllers.
-//!
+/** Use with with SIM_PROFILER_CHIP_xxx to control the memory controllers. */
#define SIM_CHIP_MEMCTL 0x001
-//! Use with with SIM_PROFILER_CHIP_xxx to control the XAUI interface.
-//!
+/** Use with with SIM_PROFILER_CHIP_xxx to control the XAUI interface. */
#define SIM_CHIP_XAUI 0x002
-//! Use with with SIM_PROFILER_CHIP_xxx to control the PCIe interface.
-//!
+/** Use with with SIM_PROFILER_CHIP_xxx to control the PCIe interface. */
#define SIM_CHIP_PCIE 0x004
-//! Use with with SIM_PROFILER_CHIP_xxx to control the MPIPE interface.
-//!
+/** Use with with SIM_PROFILER_CHIP_xxx to control the MPIPE interface. */
#define SIM_CHIP_MPIPE 0x008
-//! Reference all chip devices.
-//!
+/** Use with with SIM_PROFILER_CHIP_xxx to control the TRIO interface. */
+#define SIM_CHIP_TRIO 0x010
+
+/** Reference all chip devices. */
#define SIM_CHIP_ALL (-1)
-//! @}
+/** @} */
-//! Computes the value to write to SPR_SIM_CONTROL to clear chip statistics.
-//!
+/** Computes the value to write to SPR_SIM_CONTROL to clear chip statistics. */
#define SIM_PROFILER_CHIP_CLEAR_SPR_ARG(mask) \
(SIM_CONTROL_PROFILER_CHIP_CLEAR | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
-//! Computes the value to write to SPR_SIM_CONTROL to disable chip statistics.
-//!
+/** Computes the value to write to SPR_SIM_CONTROL to disable chip statistics.*/
#define SIM_PROFILER_CHIP_DISABLE_SPR_ARG(mask) \
(SIM_CONTROL_PROFILER_CHIP_DISABLE | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
-//! Computes the value to write to SPR_SIM_CONTROL to enable chip statistics.
-//!
+/** Computes the value to write to SPR_SIM_CONTROL to enable chip statistics. */
#define SIM_PROFILER_CHIP_ENABLE_SPR_ARG(mask) \
(SIM_CONTROL_PROFILER_CHIP_ENABLE | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
-// Shim bitrate controls.
+/* Shim bitrate controls. */
-//! The number of bits used to store the shim id.
-//!
+/** The number of bits used to store the shim id. */
#define SIM_CONTROL_SHAPING_SHIM_ID_BITS 3
-//! @addtogroup arch_sim
-//! @{
+/**
+ * @addtogroup arch_sim
+ * @{
+ */
-//! Change the gbe 0 bitrate.
-//!
+/** Change the gbe 0 bitrate. */
#define SIM_CONTROL_SHAPING_GBE_0 0x0
-//! Change the gbe 1 bitrate.
-//!
+/** Change the gbe 1 bitrate. */
#define SIM_CONTROL_SHAPING_GBE_1 0x1
-//! Change the gbe 2 bitrate.
-//!
+/** Change the gbe 2 bitrate. */
#define SIM_CONTROL_SHAPING_GBE_2 0x2
-//! Change the gbe 3 bitrate.
-//!
+/** Change the gbe 3 bitrate. */
#define SIM_CONTROL_SHAPING_GBE_3 0x3
-//! Change the xgbe 0 bitrate.
-//!
+/** Change the xgbe 0 bitrate. */
#define SIM_CONTROL_SHAPING_XGBE_0 0x4
-//! Change the xgbe 1 bitrate.
-//!
+/** Change the xgbe 1 bitrate. */
#define SIM_CONTROL_SHAPING_XGBE_1 0x5
-//! The type of shaping to do.
-//!
+/** The type of shaping to do. */
#define SIM_CONTROL_SHAPING_TYPE_BITS 2
-//! Control the multiplier.
-//!
+/** Control the multiplier. */
#define SIM_CONTROL_SHAPING_MULTIPLIER 0
-//! Control the PPS.
-//!
+/** Control the PPS. */
#define SIM_CONTROL_SHAPING_PPS 1
-//! Control the BPS.
-//!
+/** Control the BPS. */
#define SIM_CONTROL_SHAPING_BPS 2
-//! The number of bits for the units for the shaping parameter.
-//!
+/** The number of bits for the units for the shaping parameter. */
#define SIM_CONTROL_SHAPING_UNITS_BITS 2
-//! Provide a number in single units.
-//!
+/** Provide a number in single units. */
#define SIM_CONTROL_SHAPING_UNITS_SINGLE 0
-//! Provide a number in kilo units.
-//!
+/** Provide a number in kilo units. */
#define SIM_CONTROL_SHAPING_UNITS_KILO 1
-//! Provide a number in mega units.
-//!
+/** Provide a number in mega units. */
#define SIM_CONTROL_SHAPING_UNITS_MEGA 2
-//! Provide a number in giga units.
-//!
+/** Provide a number in giga units. */
#define SIM_CONTROL_SHAPING_UNITS_GIGA 3
-// @}
+/** @} */
-//! How many bits are available for the rate.
-//!
+/** How many bits are available for the rate. */
#define SIM_CONTROL_SHAPING_RATE_BITS \
(32 - (_SIM_CONTROL_OPERATOR_BITS + \
SIM_CONTROL_SHAPING_SHIM_ID_BITS + \
SIM_CONTROL_SHAPING_TYPE_BITS + \
SIM_CONTROL_SHAPING_UNITS_BITS))
-//! Computes the value to write to SPR_SIM_CONTROL to change a bitrate.
-//!
+/** Computes the value to write to SPR_SIM_CONTROL to change a bitrate. */
#define SIM_SHAPING_SPR_ARG(shim, type, units, rate) \
(SIM_CONTROL_SHAPING | \
((shim) | \
@@ -483,30 +467,36 @@
SIM_CONTROL_SHAPING_UNITS_BITS))) << _SIM_CONTROL_OPERATOR_BITS)
-//== Values returned when reading SPR_SIM_CONTROL.
-// ISSUE: These names should share a longer common prefix.
+/*
+ * Values returned when reading SPR_SIM_CONTROL.
+ * ISSUE: These names should share a longer common prefix.
+ */
-//! When reading SPR_SIM_CONTROL, the mask of simulator tracing bits
-//! (SIM_TRACE_xxx values).
-//!
+/**
+ * When reading SPR_SIM_CONTROL, the mask of simulator tracing bits
+ * (SIM_TRACE_xxx values).
+ */
#define SIM_TRACE_FLAG_MASK 0xFFFF
-//! When reading SPR_SIM_CONTROL, the mask for whether profiling is enabled.
-//!
+/** When reading SPR_SIM_CONTROL, the mask for whether profiling is enabled. */
#define SIM_PROFILER_ENABLED_MASK 0x10000
-//== Special arguments for "SIM_CONTROL_PUTC".
+/*
+ * Special arguments for "SIM_CONTROL_PUTC".
+ */
-//! Flag value for forcing a PUTC string-flush, including
-//! coordinate/cycle prefix and newline.
-//!
+/**
+ * Flag value for forcing a PUTC string-flush, including
+ * coordinate/cycle prefix and newline.
+ */
#define SIM_PUTC_FLUSH_STRING 0x100
-//! Flag value for forcing a PUTC binary-data-flush, which skips the
-//! prefix and does not append a newline.
-//!
+/**
+ * Flag value for forcing a PUTC binary-data-flush, which skips the
+ * prefix and does not append a newline.
+ */
#define SIM_PUTC_FLUSH_BINARY 0x101
-#endif //__ARCH_SIM_DEF_H__
+#endif /* __ARCH_SIM_DEF_H__ */
diff --git a/arch/tile/include/arch/spr_def.h b/arch/tile/include/arch/spr_def.h
index c8fdbd9a45e6..442fcba0d122 100644
--- a/arch/tile/include/arch/spr_def.h
+++ b/arch/tile/include/arch/spr_def.h
@@ -12,8 +12,93 @@
* more details.
*/
+/*
+ * In addition to including the proper base SPR definition file, depending
+ * on machine architecture, this file defines several macros which allow
+ * kernel code to use protection-level dependent SPRs without worrying
+ * about which PL it's running at. In these macros, the PL that the SPR
+ * or interrupt number applies to is replaced by K.
+ */
+
+#if CONFIG_KERNEL_PL != 1 && CONFIG_KERNEL_PL != 2
+#error CONFIG_KERNEL_PL must be 1 or 2
+#endif
+
+/* Concatenate 4 strings. */
+#define __concat4(a, b, c, d) a ## b ## c ## d
+#define _concat4(a, b, c, d) __concat4(a, b, c, d)
+
#ifdef __tilegx__
#include <arch/spr_def_64.h>
+
+/* TILE-Gx dependent, protection-level dependent SPRs. */
+
+#define SPR_INTERRUPT_MASK_K \
+ _concat4(SPR_INTERRUPT_MASK_, CONFIG_KERNEL_PL,,)
+#define SPR_INTERRUPT_MASK_SET_K \
+ _concat4(SPR_INTERRUPT_MASK_SET_, CONFIG_KERNEL_PL,,)
+#define SPR_INTERRUPT_MASK_RESET_K \
+ _concat4(SPR_INTERRUPT_MASK_RESET_, CONFIG_KERNEL_PL,,)
+#define SPR_INTERRUPT_VECTOR_BASE_K \
+ _concat4(SPR_INTERRUPT_VECTOR_BASE_, CONFIG_KERNEL_PL,,)
+
+#define SPR_IPI_MASK_K \
+ _concat4(SPR_IPI_MASK_, CONFIG_KERNEL_PL,,)
+#define SPR_IPI_MASK_RESET_K \
+ _concat4(SPR_IPI_MASK_RESET_, CONFIG_KERNEL_PL,,)
+#define SPR_IPI_MASK_SET_K \
+ _concat4(SPR_IPI_MASK_SET_, CONFIG_KERNEL_PL,,)
+#define SPR_IPI_EVENT_K \
+ _concat4(SPR_IPI_EVENT_, CONFIG_KERNEL_PL,,)
+#define SPR_IPI_EVENT_RESET_K \
+ _concat4(SPR_IPI_EVENT_RESET_, CONFIG_KERNEL_PL,,)
+#define SPR_IPI_MASK_SET_K \
+ _concat4(SPR_IPI_MASK_SET_, CONFIG_KERNEL_PL,,)
+#define INT_IPI_K \
+ _concat4(INT_IPI_, CONFIG_KERNEL_PL,,)
+
+#define SPR_SINGLE_STEP_CONTROL_K \
+ _concat4(SPR_SINGLE_STEP_CONTROL_, CONFIG_KERNEL_PL,,)
+#define SPR_SINGLE_STEP_EN_K_K \
+ _concat4(SPR_SINGLE_STEP_EN_, CONFIG_KERNEL_PL, _, CONFIG_KERNEL_PL)
+#define INT_SINGLE_STEP_K \
+ _concat4(INT_SINGLE_STEP_, CONFIG_KERNEL_PL,,)
+
#else
#include <arch/spr_def_32.h>
+
+/* TILEPro dependent, protection-level dependent SPRs. */
+
+#define SPR_INTERRUPT_MASK_K_0 \
+ _concat4(SPR_INTERRUPT_MASK_, CONFIG_KERNEL_PL, _0,)
+#define SPR_INTERRUPT_MASK_K_1 \
+ _concat4(SPR_INTERRUPT_MASK_, CONFIG_KERNEL_PL, _1,)
+#define SPR_INTERRUPT_MASK_SET_K_0 \
+ _concat4(SPR_INTERRUPT_MASK_SET_, CONFIG_KERNEL_PL, _0,)
+#define SPR_INTERRUPT_MASK_SET_K_1 \
+ _concat4(SPR_INTERRUPT_MASK_SET_, CONFIG_KERNEL_PL, _1,)
+#define SPR_INTERRUPT_MASK_RESET_K_0 \
+ _concat4(SPR_INTERRUPT_MASK_RESET_, CONFIG_KERNEL_PL, _0,)
+#define SPR_INTERRUPT_MASK_RESET_K_1 \
+ _concat4(SPR_INTERRUPT_MASK_RESET_, CONFIG_KERNEL_PL, _1,)
+
#endif
+
+/* Generic protection-level dependent SPRs. */
+
+#define SPR_SYSTEM_SAVE_K_0 \
+ _concat4(SPR_SYSTEM_SAVE_, CONFIG_KERNEL_PL, _0,)
+#define SPR_SYSTEM_SAVE_K_1 \
+ _concat4(SPR_SYSTEM_SAVE_, CONFIG_KERNEL_PL, _1,)
+#define SPR_SYSTEM_SAVE_K_2 \
+ _concat4(SPR_SYSTEM_SAVE_, CONFIG_KERNEL_PL, _2,)
+#define SPR_SYSTEM_SAVE_K_3 \
+ _concat4(SPR_SYSTEM_SAVE_, CONFIG_KERNEL_PL, _3,)
+#define SPR_EX_CONTEXT_K_0 \
+ _concat4(SPR_EX_CONTEXT_, CONFIG_KERNEL_PL, _0,)
+#define SPR_EX_CONTEXT_K_1 \
+ _concat4(SPR_EX_CONTEXT_, CONFIG_KERNEL_PL, _1,)
+#define SPR_INTCTRL_K_STATUS \
+ _concat4(SPR_INTCTRL_, CONFIG_KERNEL_PL, _STATUS,)
+#define INT_INTCTRL_K \
+ _concat4(INT_INTCTRL_, CONFIG_KERNEL_PL,,)
diff --git a/arch/tile/include/arch/spr_def_32.h b/arch/tile/include/arch/spr_def_32.h
index b4fc06864df6..bbc1f4c924ee 100644
--- a/arch/tile/include/arch/spr_def_32.h
+++ b/arch/tile/include/arch/spr_def_32.h
@@ -56,58 +56,93 @@
#define SPR_EX_CONTEXT_1_1__ICS_SHIFT 2
#define SPR_EX_CONTEXT_1_1__ICS_RMASK 0x1
#define SPR_EX_CONTEXT_1_1__ICS_MASK 0x4
+#define SPR_EX_CONTEXT_2_0 0x4605
+#define SPR_EX_CONTEXT_2_1 0x4606
+#define SPR_EX_CONTEXT_2_1__PL_SHIFT 0
+#define SPR_EX_CONTEXT_2_1__PL_RMASK 0x3
+#define SPR_EX_CONTEXT_2_1__PL_MASK 0x3
+#define SPR_EX_CONTEXT_2_1__ICS_SHIFT 2
+#define SPR_EX_CONTEXT_2_1__ICS_RMASK 0x1
+#define SPR_EX_CONTEXT_2_1__ICS_MASK 0x4
#define SPR_FAIL 0x4e09
#define SPR_INTCTRL_0_STATUS 0x4a07
#define SPR_INTCTRL_1_STATUS 0x4807
+#define SPR_INTCTRL_2_STATUS 0x4607
#define SPR_INTERRUPT_CRITICAL_SECTION 0x4e0a
#define SPR_INTERRUPT_MASK_0_0 0x4a08
#define SPR_INTERRUPT_MASK_0_1 0x4a09
#define SPR_INTERRUPT_MASK_1_0 0x4809
#define SPR_INTERRUPT_MASK_1_1 0x480a
+#define SPR_INTERRUPT_MASK_2_0 0x4608
+#define SPR_INTERRUPT_MASK_2_1 0x4609
#define SPR_INTERRUPT_MASK_RESET_0_0 0x4a0a
#define SPR_INTERRUPT_MASK_RESET_0_1 0x4a0b
#define SPR_INTERRUPT_MASK_RESET_1_0 0x480b
#define SPR_INTERRUPT_MASK_RESET_1_1 0x480c
+#define SPR_INTERRUPT_MASK_RESET_2_0 0x460a
+#define SPR_INTERRUPT_MASK_RESET_2_1 0x460b
#define SPR_INTERRUPT_MASK_SET_0_0 0x4a0c
#define SPR_INTERRUPT_MASK_SET_0_1 0x4a0d
#define SPR_INTERRUPT_MASK_SET_1_0 0x480d
#define SPR_INTERRUPT_MASK_SET_1_1 0x480e
+#define SPR_INTERRUPT_MASK_SET_2_0 0x460c
+#define SPR_INTERRUPT_MASK_SET_2_1 0x460d
#define SPR_MPL_DMA_CPL_SET_0 0x5800
#define SPR_MPL_DMA_CPL_SET_1 0x5801
+#define SPR_MPL_DMA_CPL_SET_2 0x5802
#define SPR_MPL_DMA_NOTIFY_SET_0 0x3800
#define SPR_MPL_DMA_NOTIFY_SET_1 0x3801
+#define SPR_MPL_DMA_NOTIFY_SET_2 0x3802
#define SPR_MPL_INTCTRL_0_SET_0 0x4a00
#define SPR_MPL_INTCTRL_0_SET_1 0x4a01
+#define SPR_MPL_INTCTRL_0_SET_2 0x4a02
#define SPR_MPL_INTCTRL_1_SET_0 0x4800
#define SPR_MPL_INTCTRL_1_SET_1 0x4801
+#define SPR_MPL_INTCTRL_1_SET_2 0x4802
+#define SPR_MPL_INTCTRL_2_SET_0 0x4600
+#define SPR_MPL_INTCTRL_2_SET_1 0x4601
+#define SPR_MPL_INTCTRL_2_SET_2 0x4602
#define SPR_MPL_SN_ACCESS_SET_0 0x0800
#define SPR_MPL_SN_ACCESS_SET_1 0x0801
+#define SPR_MPL_SN_ACCESS_SET_2 0x0802
#define SPR_MPL_SN_CPL_SET_0 0x5a00
#define SPR_MPL_SN_CPL_SET_1 0x5a01
+#define SPR_MPL_SN_CPL_SET_2 0x5a02
#define SPR_MPL_SN_FIREWALL_SET_0 0x2c00
#define SPR_MPL_SN_FIREWALL_SET_1 0x2c01
+#define SPR_MPL_SN_FIREWALL_SET_2 0x2c02
#define SPR_MPL_SN_NOTIFY_SET_0 0x2a00
#define SPR_MPL_SN_NOTIFY_SET_1 0x2a01
+#define SPR_MPL_SN_NOTIFY_SET_2 0x2a02
#define SPR_MPL_UDN_ACCESS_SET_0 0x0c00
#define SPR_MPL_UDN_ACCESS_SET_1 0x0c01
+#define SPR_MPL_UDN_ACCESS_SET_2 0x0c02
#define SPR_MPL_UDN_AVAIL_SET_0 0x4000
#define SPR_MPL_UDN_AVAIL_SET_1 0x4001
+#define SPR_MPL_UDN_AVAIL_SET_2 0x4002
#define SPR_MPL_UDN_CA_SET_0 0x3c00
#define SPR_MPL_UDN_CA_SET_1 0x3c01
+#define SPR_MPL_UDN_CA_SET_2 0x3c02
#define SPR_MPL_UDN_COMPLETE_SET_0 0x1400
#define SPR_MPL_UDN_COMPLETE_SET_1 0x1401
+#define SPR_MPL_UDN_COMPLETE_SET_2 0x1402
#define SPR_MPL_UDN_FIREWALL_SET_0 0x3000
#define SPR_MPL_UDN_FIREWALL_SET_1 0x3001
+#define SPR_MPL_UDN_FIREWALL_SET_2 0x3002
#define SPR_MPL_UDN_REFILL_SET_0 0x1000
#define SPR_MPL_UDN_REFILL_SET_1 0x1001
+#define SPR_MPL_UDN_REFILL_SET_2 0x1002
#define SPR_MPL_UDN_TIMER_SET_0 0x3600
#define SPR_MPL_UDN_TIMER_SET_1 0x3601
+#define SPR_MPL_UDN_TIMER_SET_2 0x3602
#define SPR_MPL_WORLD_ACCESS_SET_0 0x4e00
#define SPR_MPL_WORLD_ACCESS_SET_1 0x4e01
+#define SPR_MPL_WORLD_ACCESS_SET_2 0x4e02
#define SPR_PASS 0x4e0b
#define SPR_PERF_COUNT_0 0x4205
#define SPR_PERF_COUNT_1 0x4206
#define SPR_PERF_COUNT_CTL 0x4207
+#define SPR_PERF_COUNT_DN_CTL 0x4210
#define SPR_PERF_COUNT_STS 0x4208
#define SPR_PROC_STATUS 0x4f00
#define SPR_SIM_CONTROL 0x4e0c
@@ -124,6 +159,10 @@
#define SPR_SYSTEM_SAVE_1_1 0x4901
#define SPR_SYSTEM_SAVE_1_2 0x4902
#define SPR_SYSTEM_SAVE_1_3 0x4903
+#define SPR_SYSTEM_SAVE_2_0 0x4700
+#define SPR_SYSTEM_SAVE_2_1 0x4701
+#define SPR_SYSTEM_SAVE_2_2 0x4702
+#define SPR_SYSTEM_SAVE_2_3 0x4703
#define SPR_TILE_COORD 0x4c17
#define SPR_TILE_RTF_HWM 0x4e10
#define SPR_TILE_TIMER_CONTROL 0x3205
diff --git a/arch/tile/include/asm/backtrace.h b/arch/tile/include/asm/backtrace.h
index 758ca4619d50..f18887d82399 100644
--- a/arch/tile/include/asm/backtrace.h
+++ b/arch/tile/include/asm/backtrace.h
@@ -146,7 +146,10 @@ enum {
CALLER_SP_IN_R52_BASE = 4,
- CALLER_SP_OFFSET_BASE = 8
+ CALLER_SP_OFFSET_BASE = 8,
+
+ /* Marks the entry point of certain functions. */
+ ENTRY_POINT_INFO_OP = 16
};
diff --git a/arch/tile/include/asm/compat.h b/arch/tile/include/asm/compat.h
index 8b60ec8b2d19..c3ae570c0a5d 100644
--- a/arch/tile/include/asm/compat.h
+++ b/arch/tile/include/asm/compat.h
@@ -216,15 +216,16 @@ struct compat_siginfo;
struct compat_sigaltstack;
long compat_sys_execve(const char __user *path,
const compat_uptr_t __user *argv,
- const compat_uptr_t __user *envp);
+ const compat_uptr_t __user *envp, struct pt_regs *);
long compat_sys_rt_sigaction(int sig, struct compat_sigaction __user *act,
struct compat_sigaction __user *oact,
size_t sigsetsize);
long compat_sys_rt_sigqueueinfo(int pid, int sig,
struct compat_siginfo __user *uinfo);
-long compat_sys_rt_sigreturn(void);
+long compat_sys_rt_sigreturn(struct pt_regs *);
long compat_sys_sigaltstack(const struct compat_sigaltstack __user *uss_ptr,
- struct compat_sigaltstack __user *uoss_ptr);
+ struct compat_sigaltstack __user *uoss_ptr,
+ struct pt_regs *);
long compat_sys_truncate64(char __user *filename, u32 dummy, u32 low, u32 high);
long compat_sys_ftruncate64(unsigned int fd, u32 dummy, u32 low, u32 high);
long compat_sys_pread64(unsigned int fd, char __user *ubuf, size_t count,
@@ -255,4 +256,12 @@ long tile_compat_sys_ptrace(compat_long_t request, compat_long_t pid,
/* Tilera Linux syscalls that don't have "compat" versions. */
#define compat_sys_flush_cache sys_flush_cache
+/* These are the intvec_64.S trampolines. */
+long _compat_sys_execve(const char __user *path,
+ const compat_uptr_t __user *argv,
+ const compat_uptr_t __user *envp);
+long _compat_sys_sigaltstack(const struct compat_sigaltstack __user *uss_ptr,
+ struct compat_sigaltstack __user *uoss_ptr);
+long _compat_sys_rt_sigreturn(void);
+
#endif /* _ASM_TILE_COMPAT_H */
diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h
index a11d4837ee4d..641e4ff3d805 100644
--- a/arch/tile/include/asm/irqflags.h
+++ b/arch/tile/include/asm/irqflags.h
@@ -47,53 +47,53 @@
int __n = (n); \
int __mask = 1 << (__n & 0x1f); \
if (__n < 32) \
- __insn_mtspr(SPR_INTERRUPT_MASK_SET_1_0, __mask); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_SET_K_0, __mask); \
else \
- __insn_mtspr(SPR_INTERRUPT_MASK_SET_1_1, __mask); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_SET_K_1, __mask); \
} while (0)
#define interrupt_mask_reset(n) do { \
int __n = (n); \
int __mask = 1 << (__n & 0x1f); \
if (__n < 32) \
- __insn_mtspr(SPR_INTERRUPT_MASK_RESET_1_0, __mask); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_0, __mask); \
else \
- __insn_mtspr(SPR_INTERRUPT_MASK_RESET_1_1, __mask); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_1, __mask); \
} while (0)
#define interrupt_mask_check(n) ({ \
int __n = (n); \
(((__n < 32) ? \
- __insn_mfspr(SPR_INTERRUPT_MASK_1_0) : \
- __insn_mfspr(SPR_INTERRUPT_MASK_1_1)) \
+ __insn_mfspr(SPR_INTERRUPT_MASK_K_0) : \
+ __insn_mfspr(SPR_INTERRUPT_MASK_K_1)) \
>> (__n & 0x1f)) & 1; \
})
#define interrupt_mask_set_mask(mask) do { \
unsigned long long __m = (mask); \
- __insn_mtspr(SPR_INTERRUPT_MASK_SET_1_0, (unsigned long)(__m)); \
- __insn_mtspr(SPR_INTERRUPT_MASK_SET_1_1, (unsigned long)(__m>>32)); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_SET_K_0, (unsigned long)(__m)); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_SET_K_1, (unsigned long)(__m>>32)); \
} while (0)
#define interrupt_mask_reset_mask(mask) do { \
unsigned long long __m = (mask); \
- __insn_mtspr(SPR_INTERRUPT_MASK_RESET_1_0, (unsigned long)(__m)); \
- __insn_mtspr(SPR_INTERRUPT_MASK_RESET_1_1, (unsigned long)(__m>>32)); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_0, (unsigned long)(__m)); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_1, (unsigned long)(__m>>32)); \
} while (0)
#else
#define interrupt_mask_set(n) \
- __insn_mtspr(SPR_INTERRUPT_MASK_SET_1, (1UL << (n)))
+ __insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (1UL << (n)))
#define interrupt_mask_reset(n) \
- __insn_mtspr(SPR_INTERRUPT_MASK_RESET_1, (1UL << (n)))
+ __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K, (1UL << (n)))
#define interrupt_mask_check(n) \
- ((__insn_mfspr(SPR_INTERRUPT_MASK_1) >> (n)) & 1)
+ ((__insn_mfspr(SPR_INTERRUPT_MASK_K) >> (n)) & 1)
#define interrupt_mask_set_mask(mask) \
- __insn_mtspr(SPR_INTERRUPT_MASK_SET_1, (mask))
+ __insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (mask))
#define interrupt_mask_reset_mask(mask) \
- __insn_mtspr(SPR_INTERRUPT_MASK_RESET_1, (mask))
+ __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K, (mask))
#endif
/*
* The set of interrupts we want active if irqs are enabled.
* Note that in particular, the tile timer interrupt comes and goes
* from this set, since we have no other way to turn off the timer.
- * Likewise, INTCTRL_1 is removed and re-added during device
+ * Likewise, INTCTRL_K is removed and re-added during device
* interrupts, as is the the hardwall UDN_FIREWALL interrupt.
* We use a low bit (MEM_ERROR) as our sentinel value and make sure it
* is always claimed as an "active interrupt" so we can query that bit
@@ -170,14 +170,14 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
/* Return 0 or 1 to indicate whether interrupts are currently disabled. */
#define IRQS_DISABLED(tmp) \
- mfspr tmp, INTERRUPT_MASK_1; \
+ mfspr tmp, SPR_INTERRUPT_MASK_K; \
andi tmp, tmp, 1
/* Load up a pointer to &interrupts_enabled_mask. */
#define GET_INTERRUPTS_ENABLED_MASK_PTR(reg) \
- moveli reg, hw2_last(interrupts_enabled_mask); \
- shl16insli reg, reg, hw1(interrupts_enabled_mask); \
- shl16insli reg, reg, hw0(interrupts_enabled_mask); \
+ moveli reg, hw2_last(interrupts_enabled_mask); \
+ shl16insli reg, reg, hw1(interrupts_enabled_mask); \
+ shl16insli reg, reg, hw0(interrupts_enabled_mask); \
add reg, reg, tp
/* Disable interrupts. */
@@ -185,18 +185,18 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
moveli tmp0, hw2_last(LINUX_MASKABLE_INTERRUPTS); \
shl16insli tmp0, tmp0, hw1(LINUX_MASKABLE_INTERRUPTS); \
shl16insli tmp0, tmp0, hw0(LINUX_MASKABLE_INTERRUPTS); \
- mtspr INTERRUPT_MASK_SET_1, tmp0
+ mtspr SPR_INTERRUPT_MASK_SET_K, tmp0
/* Disable ALL synchronous interrupts (used by NMI entry). */
#define IRQ_DISABLE_ALL(tmp) \
movei tmp, -1; \
- mtspr INTERRUPT_MASK_SET_1, tmp
+ mtspr SPR_INTERRUPT_MASK_SET_K, tmp
/* Enable interrupts. */
#define IRQ_ENABLE(tmp0, tmp1) \
GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0); \
ld tmp0, tmp0; \
- mtspr INTERRUPT_MASK_RESET_1, tmp0
+ mtspr SPR_INTERRUPT_MASK_RESET_K, tmp0
#else /* !__tilegx__ */
@@ -210,14 +210,14 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
* (making the original code's write of the "high" mask word idempotent).
*/
#define IRQS_DISABLED(tmp) \
- mfspr tmp, INTERRUPT_MASK_1_0; \
+ mfspr tmp, SPR_INTERRUPT_MASK_K_0; \
shri tmp, tmp, INT_MEM_ERROR; \
andi tmp, tmp, 1
/* Load up a pointer to &interrupts_enabled_mask. */
#define GET_INTERRUPTS_ENABLED_MASK_PTR(reg) \
- moveli reg, lo16(interrupts_enabled_mask); \
- auli reg, reg, ha16(interrupts_enabled_mask);\
+ moveli reg, lo16(interrupts_enabled_mask); \
+ auli reg, reg, ha16(interrupts_enabled_mask); \
add reg, reg, tp
/* Disable interrupts. */
@@ -227,16 +227,16 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
moveli tmp1, lo16(LINUX_MASKABLE_INTERRUPTS) \
}; \
{ \
- mtspr INTERRUPT_MASK_SET_1_0, tmp0; \
+ mtspr SPR_INTERRUPT_MASK_SET_K_0, tmp0; \
auli tmp1, tmp1, ha16(LINUX_MASKABLE_INTERRUPTS) \
}; \
- mtspr INTERRUPT_MASK_SET_1_1, tmp1
+ mtspr SPR_INTERRUPT_MASK_SET_K_1, tmp1
/* Disable ALL synchronous interrupts (used by NMI entry). */
#define IRQ_DISABLE_ALL(tmp) \
movei tmp, -1; \
- mtspr INTERRUPT_MASK_SET_1_0, tmp; \
- mtspr INTERRUPT_MASK_SET_1_1, tmp
+ mtspr SPR_INTERRUPT_MASK_SET_K_0, tmp; \
+ mtspr SPR_INTERRUPT_MASK_SET_K_1, tmp
/* Enable interrupts. */
#define IRQ_ENABLE(tmp0, tmp1) \
@@ -246,8 +246,8 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
addi tmp1, tmp0, 4 \
}; \
lw tmp1, tmp1; \
- mtspr INTERRUPT_MASK_RESET_1_0, tmp0; \
- mtspr INTERRUPT_MASK_RESET_1_1, tmp1
+ mtspr SPR_INTERRUPT_MASK_RESET_K_0, tmp0; \
+ mtspr SPR_INTERRUPT_MASK_RESET_K_1, tmp1
#endif
/*
diff --git a/arch/tile/include/asm/mman.h b/arch/tile/include/asm/mman.h
index 4c6811e3e8dc..81b8fc348d63 100644
--- a/arch/tile/include/asm/mman.h
+++ b/arch/tile/include/asm/mman.h
@@ -23,6 +23,7 @@
#define MAP_POPULATE 0x0040 /* populate (prefault) pagetables */
#define MAP_NONBLOCK 0x0080 /* do not block on IO */
#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
+#define MAP_STACK MAP_GROWSDOWN /* provide convenience alias */
#define MAP_LOCKED 0x0200 /* pages are locked */
#define MAP_NORESERVE 0x0400 /* don't check for reservations */
#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
diff --git a/arch/tile/include/asm/page.h b/arch/tile/include/asm/page.h
index 7d90641cf18d..7979a45430d3 100644
--- a/arch/tile/include/asm/page.h
+++ b/arch/tile/include/asm/page.h
@@ -199,17 +199,17 @@ static inline __attribute_const__ int get_order(unsigned long size)
* If you want more physical memory than this then see the CONFIG_HIGHMEM
* option in the kernel configuration.
*
- * The top two 16MB chunks in the table below (VIRT and HV) are
- * unavailable to Linux. Since the kernel interrupt vectors must live
- * at 0xfd000000, we map all of the bottom of RAM at this address with
- * a huge page table entry to minimize its ITLB footprint (as well as
- * at PAGE_OFFSET). The last architected requirement is that user
- * interrupt vectors live at 0xfc000000, so we make that range of
- * memory available to user processes. The remaining regions are sized
- * as shown; after the first four addresses, we show "typical" values,
- * since the actual addresses depend on kernel #defines.
+ * The top 16MB chunk in the table below is unavailable to Linux. Since
+ * the kernel interrupt vectors must live at ether 0xfe000000 or 0xfd000000
+ * (depending on whether the kernel is at PL2 or Pl1), we map all of the
+ * bottom of RAM at this address with a huge page table entry to minimize
+ * its ITLB footprint (as well as at PAGE_OFFSET). The last architected
+ * requirement is that user interrupt vectors live at 0xfc000000, so we
+ * make that range of memory available to user processes. The remaining
+ * regions are sized as shown; the first four addresses use the PL 1
+ * values, and after that, we show "typical" values, since the actual
+ * addresses depend on kernel #defines.
*
- * MEM_VIRT_INTRPT 0xff000000
* MEM_HV_INTRPT 0xfe000000
* MEM_SV_INTRPT (kernel code) 0xfd000000
* MEM_USER_INTRPT (user vector) 0xfc000000
@@ -221,9 +221,14 @@ static inline __attribute_const__ int get_order(unsigned long size)
*/
#define MEM_USER_INTRPT _AC(0xfc000000, UL)
+#if CONFIG_KERNEL_PL == 1
#define MEM_SV_INTRPT _AC(0xfd000000, UL)
#define MEM_HV_INTRPT _AC(0xfe000000, UL)
-#define MEM_VIRT_INTRPT _AC(0xff000000, UL)
+#else
+#define MEM_GUEST_INTRPT _AC(0xfd000000, UL)
+#define MEM_SV_INTRPT _AC(0xfe000000, UL)
+#define MEM_HV_INTRPT _AC(0xff000000, UL)
+#endif
#define INTRPT_SIZE 0x4000
diff --git a/arch/tile/include/asm/processor.h b/arch/tile/include/asm/processor.h
index ccd5f8425688..1747ff3946b2 100644
--- a/arch/tile/include/asm/processor.h
+++ b/arch/tile/include/asm/processor.h
@@ -328,18 +328,21 @@ extern int kdata_huge;
* Note that assembly code assumes that USER_PL is zero.
*/
#define USER_PL 0
-#define KERNEL_PL 1
+#if CONFIG_KERNEL_PL == 2
+#define GUEST_PL 1
+#endif
+#define KERNEL_PL CONFIG_KERNEL_PL
-/* SYSTEM_SAVE_1_0 holds the current cpu number ORed with ksp0. */
+/* SYSTEM_SAVE_K_0 holds the current cpu number ORed with ksp0. */
#define CPU_LOG_MASK_VALUE 12
#define CPU_MASK_VALUE ((1 << CPU_LOG_MASK_VALUE) - 1)
#if CONFIG_NR_CPUS > CPU_MASK_VALUE
# error Too many cpus!
#endif
#define raw_smp_processor_id() \
- ((int)__insn_mfspr(SPR_SYSTEM_SAVE_1_0) & CPU_MASK_VALUE)
+ ((int)__insn_mfspr(SPR_SYSTEM_SAVE_K_0) & CPU_MASK_VALUE)
#define get_current_ksp0() \
- (__insn_mfspr(SPR_SYSTEM_SAVE_1_0) & ~CPU_MASK_VALUE)
+ (__insn_mfspr(SPR_SYSTEM_SAVE_K_0) & ~CPU_MASK_VALUE)
#define next_current_ksp0(task) ({ \
unsigned long __ksp0 = task_ksp0(task); \
int __cpu = raw_smp_processor_id(); \
diff --git a/arch/tile/include/asm/ptrace.h b/arch/tile/include/asm/ptrace.h
index 4a02bb073979..ac6d343129d3 100644
--- a/arch/tile/include/asm/ptrace.h
+++ b/arch/tile/include/asm/ptrace.h
@@ -62,8 +62,8 @@ struct pt_regs {
pt_reg_t lr; /* aliases regs[TREG_LR] */
/* Saved special registers. */
- pt_reg_t pc; /* stored in EX_CONTEXT_1_0 */
- pt_reg_t ex1; /* stored in EX_CONTEXT_1_1 (PL and ICS bit) */
+ pt_reg_t pc; /* stored in EX_CONTEXT_K_0 */
+ pt_reg_t ex1; /* stored in EX_CONTEXT_K_1 (PL and ICS bit) */
pt_reg_t faultnum; /* fault number (INT_SWINT_1 for syscall) */
pt_reg_t orig_r0; /* r0 at syscall entry, else zero */
pt_reg_t flags; /* flags (see below) */
diff --git a/arch/tile/include/asm/syscalls.h b/arch/tile/include/asm/syscalls.h
index ce99ffefeacf..3b5507c31eae 100644
--- a/arch/tile/include/asm/syscalls.h
+++ b/arch/tile/include/asm/syscalls.h
@@ -32,8 +32,9 @@ extern void *compat_sys_call_table[];
/*
* Note that by convention, any syscall which requires the current
- * register set takes an additional "struct pt_regs *" pointer; the
- * sys_xxx() function just adds the pointer and tail-calls to _sys_xxx().
+ * register set takes an additional "struct pt_regs *" pointer; a
+ * _sys_xxx() trampoline in intvec*.S just sets up the pointer and
+ * jumps to sys_xxx().
*/
/* kernel/sys.c */
@@ -43,66 +44,17 @@ long sys32_fadvise64(int fd, u32 offset_lo, u32 offset_hi,
int sys32_fadvise64_64(int fd, u32 offset_lo, u32 offset_hi,
u32 len_lo, u32 len_hi, int advice);
long sys_flush_cache(void);
-long sys_mmap2(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, unsigned long pgoff);
-#ifdef __tilegx__
-long sys_mmap(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, off_t pgoff);
+#ifndef __tilegx__ /* No mmap() in the 32-bit kernel. */
+#define sys_mmap sys_mmap
#endif
-/* kernel/process.c */
-long sys_clone(unsigned long clone_flags, unsigned long newsp,
- void __user *parent_tid, void __user *child_tid);
-long _sys_clone(unsigned long clone_flags, unsigned long newsp,
- void __user *parent_tid, void __user *child_tid,
- struct pt_regs *regs);
-long sys_fork(void);
-long _sys_fork(struct pt_regs *regs);
-long sys_vfork(void);
-long _sys_vfork(struct pt_regs *regs);
-long sys_execve(const char __user *filename,
- const char __user *const __user *argv,
- const char __user *const __user *envp);
-long _sys_execve(const char __user *filename,
- const char __user *const __user *argv,
- const char __user *const __user *envp, struct pt_regs *regs);
-
-/* kernel/signal.c */
-long sys_sigaltstack(const stack_t __user *, stack_t __user *);
-long _sys_sigaltstack(const stack_t __user *, stack_t __user *,
- struct pt_regs *);
-long sys_rt_sigreturn(void);
-long _sys_rt_sigreturn(struct pt_regs *regs);
-
-/* platform-independent functions */
-long sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize);
-long sys_rt_sigaction(int sig, const struct sigaction __user *act,
- struct sigaction __user *oact, size_t sigsetsize);
-
#ifndef __tilegx__
/* mm/fault.c */
-int sys_cmpxchg_badaddr(unsigned long address);
-int _sys_cmpxchg_badaddr(unsigned long address, struct pt_regs *);
+long sys_cmpxchg_badaddr(unsigned long address, struct pt_regs *);
+long _sys_cmpxchg_badaddr(unsigned long address);
#endif
#ifdef CONFIG_COMPAT
-long compat_sys_execve(const char __user *path,
- const compat_uptr_t __user *argv,
- const compat_uptr_t __user *envp);
-long _compat_sys_execve(const char __user *path,
- const compat_uptr_t __user *argv,
- const compat_uptr_t __user *envp,
- struct pt_regs *regs);
-long compat_sys_sigaltstack(const struct compat_sigaltstack __user *uss_ptr,
- struct compat_sigaltstack __user *uoss_ptr);
-long _compat_sys_sigaltstack(const struct compat_sigaltstack __user *uss_ptr,
- struct compat_sigaltstack __user *uoss_ptr,
- struct pt_regs *regs);
-long compat_sys_rt_sigreturn(void);
-long _compat_sys_rt_sigreturn(struct pt_regs *regs);
-
/* These four are not defined for 64-bit, but serve as "compat" syscalls. */
long sys_fcntl64(unsigned int fd, unsigned int cmd, unsigned long arg);
long sys_fstat64(unsigned long fd, struct stat64 __user *statbuf);
@@ -110,4 +62,15 @@ long sys_truncate64(const char __user *path, loff_t length);
long sys_ftruncate64(unsigned int fd, loff_t length);
#endif
+/* These are the intvec*.S trampolines. */
+long _sys_sigaltstack(const stack_t __user *, stack_t __user *);
+long _sys_rt_sigreturn(void);
+long _sys_clone(unsigned long clone_flags, unsigned long newsp,
+ void __user *parent_tid, void __user *child_tid);
+long _sys_execve(const char __user *filename,
+ const char __user *const __user *argv,
+ const char __user *const __user *envp);
+
+#include <asm-generic/syscalls.h>
+
#endif /* _ASM_TILE_SYSCALLS_H */
diff --git a/arch/tile/include/asm/system.h b/arch/tile/include/asm/system.h
index f749be327ce0..5388850deeb2 100644
--- a/arch/tile/include/asm/system.h
+++ b/arch/tile/include/asm/system.h
@@ -89,6 +89,10 @@
#define get_cycles_low() __insn_mfspr(SPR_CYCLE) /* just get all 64 bits */
#endif
+#if !CHIP_HAS_MF_WAITS_FOR_VICTIMS()
+int __mb_incoherent(void); /* Helper routine for mb_incoherent(). */
+#endif
+
/* Fence to guarantee visibility of stores to incoherent memory. */
static inline void
mb_incoherent(void)
@@ -97,7 +101,6 @@ mb_incoherent(void)
#if !CHIP_HAS_MF_WAITS_FOR_VICTIMS()
{
- int __mb_incoherent(void);
#if CHIP_HAS_TILE_WRITE_PENDING()
const unsigned long WRITE_TIMEOUT_CYCLES = 400;
unsigned long start = get_cycles_low();
@@ -161,7 +164,7 @@ extern struct task_struct *_switch_to(struct task_struct *prev,
/* Helper function for _switch_to(). */
extern struct task_struct *__switch_to(struct task_struct *prev,
struct task_struct *next,
- unsigned long new_system_save_1_0);
+ unsigned long new_system_save_k_0);
/* Address that switched-away from tasks are at. */
extern unsigned long get_switch_to_pc(void);
@@ -214,13 +217,6 @@ int hardwall_deactivate(struct task_struct *task);
} while (0)
#endif
-/* Invoke the simulator "syscall" mechanism (see arch/tile/kernel/entry.S). */
-extern int _sim_syscall(int syscall_num, ...);
-#define sim_syscall(syscall_num, ...) \
- _sim_syscall(SIM_CONTROL_SYSCALL + \
- ((syscall_num) << _SIM_CONTROL_OPERATOR_BITS), \
- ## __VA_ARGS__)
-
/*
* Kernel threads can check to see if they need to migrate their
* stack whenever they return from a context switch; for user
diff --git a/arch/tile/include/asm/traps.h b/arch/tile/include/asm/traps.h
index 432a9c15c8a2..d06e35f57201 100644
--- a/arch/tile/include/asm/traps.h
+++ b/arch/tile/include/asm/traps.h
@@ -59,4 +59,8 @@ void do_hardwall_trap(struct pt_regs *, int fault_num);
void do_breakpoint(struct pt_regs *, int fault_num);
+#ifdef __tilegx__
+void gx_singlestep_handle(struct pt_regs *, int fault_num);
+#endif
+
#endif /* _ASM_TILE_SYSCALLS_H */
diff --git a/arch/tile/include/hv/hypervisor.h b/arch/tile/include/hv/hypervisor.h
index 9bd303a141b2..f672544cd4f9 100644
--- a/arch/tile/include/hv/hypervisor.h
+++ b/arch/tile/include/hv/hypervisor.h
@@ -1003,37 +1003,37 @@ int hv_console_write(HV_VirtAddr bytes, int len);
* when these occur in a client's interrupt critical section, they must
* be delivered through the downcall mechanism.
*
- * A downcall is initially delivered to the client as an INTCTRL_1
- * interrupt. Upon entry to the INTCTRL_1 vector, the client must
- * immediately invoke the hv_downcall_dispatch service. This service
- * will not return; instead it will cause one of the client's actual
- * downcall-handling interrupt vectors to be entered. The EX_CONTEXT
- * registers in the client will be set so that when the client irets,
- * it will return to the code which was interrupted by the INTCTRL_1
- * interrupt.
- *
- * Under some circumstances, the firing of INTCTRL_1 can race with
+ * A downcall is initially delivered to the client as an INTCTRL_CL
+ * interrupt, where CL is the client's PL. Upon entry to the INTCTRL_CL
+ * vector, the client must immediately invoke the hv_downcall_dispatch
+ * service. This service will not return; instead it will cause one of
+ * the client's actual downcall-handling interrupt vectors to be entered.
+ * The EX_CONTEXT registers in the client will be set so that when the
+ * client irets, it will return to the code which was interrupted by the
+ * INTCTRL_CL interrupt.
+ *
+ * Under some circumstances, the firing of INTCTRL_CL can race with
* the lowering of a device interrupt. In such a case, the
* hv_downcall_dispatch service may issue an iret instruction instead
* of entering one of the client's actual downcall-handling interrupt
* vectors. This will return execution to the location that was
- * interrupted by INTCTRL_1.
+ * interrupted by INTCTRL_CL.
*
* Any saving of registers should be done by the actual handling
- * vectors; no registers should be changed by the INTCTRL_1 handler.
+ * vectors; no registers should be changed by the INTCTRL_CL handler.
* In particular, the client should not use a jal instruction to invoke
* the hv_downcall_dispatch service, as that would overwrite the client's
* lr register. Note that the hv_downcall_dispatch service may overwrite
* one or more of the client's system save registers.
*
- * The client must not modify the INTCTRL_1_STATUS SPR. The hypervisor
+ * The client must not modify the INTCTRL_CL_STATUS SPR. The hypervisor
* will set this register to cause a downcall to happen, and will clear
* it when no further downcalls are pending.
*
- * When a downcall vector is entered, the INTCTRL_1 interrupt will be
+ * When a downcall vector is entered, the INTCTRL_CL interrupt will be
* masked. When the client is done processing a downcall, and is ready
* to accept another, it must unmask this interrupt; if more downcalls
- * are pending, this will cause the INTCTRL_1 vector to be reentered.
+ * are pending, this will cause the INTCTRL_CL vector to be reentered.
* Currently the following interrupt vectors can be entered through a
* downcall:
*
diff --git a/arch/tile/kernel/backtrace.c b/arch/tile/kernel/backtrace.c
index d3c41c1ff6bd..55a6a74974b4 100644
--- a/arch/tile/kernel/backtrace.c
+++ b/arch/tile/kernel/backtrace.c
@@ -369,6 +369,10 @@ static void find_caller_pc_and_caller_sp(CallerLocation *location,
/* Weird; reserved value, ignore it. */
continue;
}
+ if (info_operand & ENTRY_POINT_INFO_OP) {
+ /* This info op is ignored by the backtracer. */
+ continue;
+ }
/* Skip info ops which are not in the
* "one_ago" mode we want right now.
diff --git a/arch/tile/kernel/compat.c b/arch/tile/kernel/compat.c
index b1e06d041555..77739cdd9462 100644
--- a/arch/tile/kernel/compat.c
+++ b/arch/tile/kernel/compat.c
@@ -154,8 +154,14 @@ long tile_compat_sys_msgrcv(int msqid,
#define compat_sys_fstat64 sys_newfstat
#define compat_sys_fstatat64 sys_newfstatat
-/* Pass full 64-bit values through ptrace. */
-#define compat_sys_ptrace tile_compat_sys_ptrace
+/* The native sys_ptrace dynamically handles compat binaries. */
+#define compat_sys_ptrace sys_ptrace
+
+/* Call the trampolines to manage pt_regs where necessary. */
+#define compat_sys_execve _compat_sys_execve
+#define compat_sys_sigaltstack _compat_sys_sigaltstack
+#define compat_sys_rt_sigreturn _compat_sys_rt_sigreturn
+#define sys_clone _sys_clone
/*
* Note that we can't include <linux/unistd.h> here since the header
diff --git a/arch/tile/kernel/compat_signal.c b/arch/tile/kernel/compat_signal.c
index 9c710db43f13..fb64b99959d4 100644
--- a/arch/tile/kernel/compat_signal.c
+++ b/arch/tile/kernel/compat_signal.c
@@ -256,9 +256,9 @@ int copy_siginfo_from_user32(siginfo_t *to, struct compat_siginfo __user *from)
return err;
}
-long _compat_sys_sigaltstack(const struct compat_sigaltstack __user *uss_ptr,
- struct compat_sigaltstack __user *uoss_ptr,
- struct pt_regs *regs)
+long compat_sys_sigaltstack(const struct compat_sigaltstack __user *uss_ptr,
+ struct compat_sigaltstack __user *uoss_ptr,
+ struct pt_regs *regs)
{
stack_t uss, uoss;
int ret;
@@ -291,7 +291,7 @@ long _compat_sys_sigaltstack(const struct compat_sigaltstack __user *uss_ptr,
return ret;
}
-long _compat_sys_rt_sigreturn(struct pt_regs *regs)
+long compat_sys_rt_sigreturn(struct pt_regs *regs)
{
struct compat_rt_sigframe __user *frame =
(struct compat_rt_sigframe __user *) compat_ptr(regs->sp);
@@ -312,7 +312,7 @@ long _compat_sys_rt_sigreturn(struct pt_regs *regs)
if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
goto badframe;
- if (_compat_sys_sigaltstack(&frame->uc.uc_stack, NULL, regs) != 0)
+ if (compat_sys_sigaltstack(&frame->uc.uc_stack, NULL, regs) != 0)
goto badframe;
return r0;
diff --git a/arch/tile/kernel/entry.S b/arch/tile/kernel/entry.S
index 3d01383b1b0e..fd8dc42abdcb 100644
--- a/arch/tile/kernel/entry.S
+++ b/arch/tile/kernel/entry.S
@@ -15,7 +15,9 @@
#include <linux/linkage.h>
#include <linux/unistd.h>
#include <asm/irqflags.h>
+#include <asm/processor.h>
#include <arch/abi.h>
+#include <arch/spr_def.h>
#ifdef __tilegx__
#define bnzt bnezt
@@ -25,28 +27,6 @@ STD_ENTRY(current_text_addr)
{ move r0, lr; jrp lr }
STD_ENDPROC(current_text_addr)
-STD_ENTRY(_sim_syscall)
- /*
- * Wait for r0-r9 to be ready (and lr on the off chance we
- * want the syscall to locate its caller), then make a magic
- * simulator syscall.
- *
- * We carefully stall until the registers are readable in case they
- * are the target of a slow load, etc. so that tile-sim will
- * definitely be able to read all of them inside the magic syscall.
- *
- * Technically this is wrong for r3-r9 and lr, since an interrupt
- * could come in and restore the registers with a slow load right
- * before executing the mtspr. We may need to modify tile-sim to
- * explicitly stall for this case, but we do not yet have
- * a way to implement such a stall.
- */
- { and zero, lr, r9 ; and zero, r8, r7 }
- { and zero, r6, r5 ; and zero, r4, r3 }
- { and zero, r2, r1 ; mtspr SIM_CONTROL, r0 }
- { jrp lr }
- STD_ENDPROC(_sim_syscall)
-
/*
* Implement execve(). The i386 code has a note that forking from kernel
* space results in no copy on write until the execve, so we should be
@@ -102,7 +82,7 @@ STD_ENTRY(KBacktraceIterator_init_current)
STD_ENTRY(cpu_idle_on_new_stack)
{
move sp, r1
- mtspr SYSTEM_SAVE_1_0, r2
+ mtspr SPR_SYSTEM_SAVE_K_0, r2
}
jal free_thread_info
j cpu_idle
@@ -124,15 +104,15 @@ STD_ENTRY(smp_nap)
STD_ENTRY(_cpu_idle)
{
lnk r0
- movei r1, 1
+ movei r1, KERNEL_PL
}
{
addli r0, r0, _cpu_idle_nap - .
mtspr INTERRUPT_CRITICAL_SECTION, r1
}
- IRQ_ENABLE(r2, r3) /* unmask, but still with ICS set */
- mtspr EX_CONTEXT_1_1, r1 /* PL1, ICS clear */
- mtspr EX_CONTEXT_1_0, r0
+ IRQ_ENABLE(r2, r3) /* unmask, but still with ICS set */
+ mtspr SPR_EX_CONTEXT_K_1, r1 /* Kernel PL, ICS clear */
+ mtspr SPR_EX_CONTEXT_K_0, r0
iret
.global _cpu_idle_nap
_cpu_idle_nap:
diff --git a/arch/tile/kernel/head_32.S b/arch/tile/kernel/head_32.S
index 2b4f6c091701..90e7c4435693 100644
--- a/arch/tile/kernel/head_32.S
+++ b/arch/tile/kernel/head_32.S
@@ -23,6 +23,7 @@
#include <asm/asm-offsets.h>
#include <hv/hypervisor.h>
#include <arch/chip.h>
+#include <arch/spr_def.h>
/*
* This module contains the entry code for kernel images. It performs the
@@ -76,7 +77,7 @@ ENTRY(_start)
}
1:
- /* Get our processor number and save it away in SAVE_1_0. */
+ /* Get our processor number and save it away in SAVE_K_0. */
jal hv_inquire_topology
mulll_uu r4, r1, r2 /* r1 == y, r2 == width */
add r4, r4, r0 /* r0 == x, so r4 == cpu == y*width + x */
@@ -124,7 +125,7 @@ ENTRY(_start)
lw r0, r0
lw sp, r1
or r4, sp, r4
- mtspr SYSTEM_SAVE_1_0, r4 /* save ksp0 + cpu */
+ mtspr SPR_SYSTEM_SAVE_K_0, r4 /* save ksp0 + cpu */
addi sp, sp, -STACK_TOP_DELTA
{
move lr, zero /* stop backtraces in the called function */
diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S
index 8f58bdff20d7..f5821626247f 100644
--- a/arch/tile/kernel/intvec_32.S
+++ b/arch/tile/kernel/intvec_32.S
@@ -32,8 +32,8 @@
# error "No support for kernel preemption currently"
#endif
-#if INT_INTCTRL_1 < 32 || INT_INTCTRL_1 >= 48
-# error INT_INTCTRL_1 coded to set high interrupt mask
+#if INT_INTCTRL_K < 32 || INT_INTCTRL_K >= 48
+# error INT_INTCTRL_K coded to set high interrupt mask
#endif
#define PTREGS_PTR(reg, ptreg) addli reg, sp, C_ABI_SAVE_AREA_SIZE + (ptreg)
@@ -132,8 +132,8 @@ intvec_\vecname:
/* Temporarily save a register so we have somewhere to work. */
- mtspr SYSTEM_SAVE_1_1, r0
- mfspr r0, EX_CONTEXT_1_1
+ mtspr SPR_SYSTEM_SAVE_K_1, r0
+ mfspr r0, SPR_EX_CONTEXT_K_1
/* The cmpxchg code clears sp to force us to reset it here on fault. */
{
@@ -167,18 +167,18 @@ intvec_\vecname:
* The page_fault handler may be downcalled directly by the
* hypervisor even when Linux is running and has ICS set.
*
- * In this case the contents of EX_CONTEXT_1_1 reflect the
+ * In this case the contents of EX_CONTEXT_K_1 reflect the
* previous fault and can't be relied on to choose whether or
* not to reinitialize the stack pointer. So we add a test
- * to see whether SYSTEM_SAVE_1_2 has the high bit set,
+ * to see whether SYSTEM_SAVE_K_2 has the high bit set,
* and if so we don't reinitialize sp, since we must be coming
* from Linux. (In fact the precise case is !(val & ~1),
* but any Linux PC has to have the high bit set.)
*
- * Note that the hypervisor *always* sets SYSTEM_SAVE_1_2 for
+ * Note that the hypervisor *always* sets SYSTEM_SAVE_K_2 for
* any path that turns into a downcall to one of our TLB handlers.
*/
- mfspr r0, SYSTEM_SAVE_1_2
+ mfspr r0, SPR_SYSTEM_SAVE_K_2
{
blz r0, 0f /* high bit in S_S_1_2 is for a PC to use */
move r0, sp
@@ -187,12 +187,12 @@ intvec_\vecname:
2:
/*
- * SYSTEM_SAVE_1_0 holds the cpu number in the low bits, and
+ * SYSTEM_SAVE_K_0 holds the cpu number in the low bits, and
* the current stack top in the higher bits. So we recover
* our stack top by just masking off the low bits, then
* point sp at the top aligned address on the actual stack page.
*/
- mfspr r0, SYSTEM_SAVE_1_0
+ mfspr r0, SPR_SYSTEM_SAVE_K_0
mm r0, r0, zero, LOG2_THREAD_SIZE, 31
0:
@@ -254,7 +254,7 @@ intvec_\vecname:
sw sp, r3
addli sp, sp, PTREGS_OFFSET_PC - PTREGS_OFFSET_REG(3)
}
- mfspr r0, EX_CONTEXT_1_0
+ mfspr r0, SPR_EX_CONTEXT_K_0
.ifc \processing,handle_syscall
/*
* Bump the saved PC by one bundle so that when we return, we won't
@@ -267,7 +267,7 @@ intvec_\vecname:
sw sp, r0
addli sp, sp, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC
}
- mfspr r0, EX_CONTEXT_1_1
+ mfspr r0, SPR_EX_CONTEXT_K_1
{
sw sp, r0
addi sp, sp, PTREGS_OFFSET_FAULTNUM - PTREGS_OFFSET_EX1
@@ -289,7 +289,7 @@ intvec_\vecname:
.endif
addli sp, sp, PTREGS_OFFSET_REG(0) - PTREGS_OFFSET_FAULTNUM
}
- mfspr r0, SYSTEM_SAVE_1_1 /* Original r0 */
+ mfspr r0, SPR_SYSTEM_SAVE_K_1 /* Original r0 */
{
sw sp, r0
addi sp, sp, -PTREGS_OFFSET_REG(0) - 4
@@ -309,12 +309,12 @@ intvec_\vecname:
* See discussion below at "finish_interrupt_save".
*/
.ifc \c_routine, do_page_fault
- mfspr r2, SYSTEM_SAVE_1_3 /* address of page fault */
- mfspr r3, SYSTEM_SAVE_1_2 /* info about page fault */
+ mfspr r2, SPR_SYSTEM_SAVE_K_3 /* address of page fault */
+ mfspr r3, SPR_SYSTEM_SAVE_K_2 /* info about page fault */
.else
.ifc \vecnum, INT_DOUBLE_FAULT
{
- mfspr r2, SYSTEM_SAVE_1_2 /* double fault info from HV */
+ mfspr r2, SPR_SYSTEM_SAVE_K_2 /* double fault info from HV */
movei r3, 0
}
.else
@@ -467,7 +467,7 @@ intvec_\vecname:
/* Load tp with our per-cpu offset. */
#ifdef CONFIG_SMP
{
- mfspr r20, SYSTEM_SAVE_1_0
+ mfspr r20, SPR_SYSTEM_SAVE_K_0
moveli r21, lo16(__per_cpu_offset)
}
{
@@ -487,7 +487,7 @@ intvec_\vecname:
* We load flags in r32 here so we can jump to .Lrestore_regs
* directly after do_page_fault_ics() if necessary.
*/
- mfspr r32, EX_CONTEXT_1_1
+ mfspr r32, SPR_EX_CONTEXT_K_1
{
andi r32, r32, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */
PTREGS_PTR(r21, PTREGS_OFFSET_FLAGS)
@@ -957,11 +957,11 @@ STD_ENTRY(interrupt_return)
pop_reg_zero r21, r3, sp, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC
pop_reg_zero lr, r4, sp, PTREGS_OFFSET_REG(52) - PTREGS_OFFSET_EX1
{
- mtspr EX_CONTEXT_1_0, r21
+ mtspr SPR_EX_CONTEXT_K_0, r21
move r5, zero
}
{
- mtspr EX_CONTEXT_1_1, lr
+ mtspr SPR_EX_CONTEXT_K_1, lr
andi lr, lr, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */
}
@@ -1020,7 +1020,7 @@ STD_ENTRY(interrupt_return)
/* Set r1 to errno if we are returning an error, otherwise zero. */
{
- moveli r29, 1024
+ moveli r29, 4096
sub r1, zero, r0
}
slt_u r29, r1, r29
@@ -1199,7 +1199,7 @@ STD_ENTRY(interrupt_return)
STD_ENDPROC(interrupt_return)
/*
- * This interrupt variant clears the INT_INTCTRL_1 interrupt mask bit
+ * This interrupt variant clears the INT_INTCTRL_K interrupt mask bit
* before returning, so we can properly get more downcalls.
*/
.pushsection .text.handle_interrupt_downcall,"ax"
@@ -1208,11 +1208,11 @@ handle_interrupt_downcall:
check_single_stepping normal, .Ldispatch_downcall
.Ldispatch_downcall:
- /* Clear INTCTRL_1 from the set of interrupts we ever enable. */
+ /* Clear INTCTRL_K from the set of interrupts we ever enable. */
GET_INTERRUPTS_ENABLED_MASK_PTR(r30)
{
addi r30, r30, 4
- movei r31, INT_MASK(INT_INTCTRL_1)
+ movei r31, INT_MASK(INT_INTCTRL_K)
}
{
lw r20, r30
@@ -1227,7 +1227,7 @@ handle_interrupt_downcall:
}
FEEDBACK_REENTER(handle_interrupt_downcall)
- /* Allow INTCTRL_1 to be enabled next time we enable interrupts. */
+ /* Allow INTCTRL_K to be enabled next time we enable interrupts. */
lw r20, r30
or r20, r20, r31
sw r30, r20
@@ -1472,7 +1472,12 @@ handle_ill:
lw r26, r24
sw r28, r26
- /* Clear TIF_SINGLESTEP */
+ /*
+ * Clear TIF_SINGLESTEP to prevent recursion if we execute an ill.
+ * The normal non-arch flow redundantly clears TIF_SINGLESTEP, but we
+ * need to clear it here and can't really impose on all other arches.
+ * So what's another write between friends?
+ */
GET_THREAD_INFO(r0)
addi r1, r0, THREAD_INFO_FLAGS_OFFSET
@@ -1509,7 +1514,7 @@ handle_ill:
/* Various stub interrupt handlers and syscall handlers */
STD_ENTRY_LOCAL(_kernel_double_fault)
- mfspr r1, EX_CONTEXT_1_0
+ mfspr r1, SPR_EX_CONTEXT_K_0
move r2, lr
move r3, sp
move r4, r52
@@ -1518,34 +1523,29 @@ STD_ENTRY_LOCAL(_kernel_double_fault)
STD_ENDPROC(_kernel_double_fault)
STD_ENTRY_LOCAL(bad_intr)
- mfspr r2, EX_CONTEXT_1_0
+ mfspr r2, SPR_EX_CONTEXT_K_0
panic "Unhandled interrupt %#x: PC %#lx"
STD_ENDPROC(bad_intr)
/* Put address of pt_regs in reg and jump. */
#define PTREGS_SYSCALL(x, reg) \
- STD_ENTRY(x); \
+ STD_ENTRY(_##x); \
{ \
PTREGS_PTR(reg, PTREGS_OFFSET_BASE); \
- j _##x \
+ j x \
}; \
- STD_ENDPROC(x)
+ STD_ENDPROC(_##x)
PTREGS_SYSCALL(sys_execve, r3)
PTREGS_SYSCALL(sys_sigaltstack, r2)
PTREGS_SYSCALL(sys_rt_sigreturn, r0)
+PTREGS_SYSCALL(sys_cmpxchg_badaddr, r1)
-/* Save additional callee-saves to pt_regs, put address in reg and jump. */
-#define PTREGS_SYSCALL_ALL_REGS(x, reg) \
- STD_ENTRY(x); \
- push_extra_callee_saves reg; \
- j _##x; \
- STD_ENDPROC(x)
-
-PTREGS_SYSCALL_ALL_REGS(sys_fork, r0)
-PTREGS_SYSCALL_ALL_REGS(sys_vfork, r0)
-PTREGS_SYSCALL_ALL_REGS(sys_clone, r4)
-PTREGS_SYSCALL_ALL_REGS(sys_cmpxchg_badaddr, r1)
+/* Save additional callee-saves to pt_regs, put address in r4 and jump. */
+STD_ENTRY(_sys_clone)
+ push_extra_callee_saves r4
+ j sys_clone
+ STD_ENDPROC(_sys_clone)
/*
* This entrypoint is taken for the cmpxchg and atomic_update fast
@@ -1558,12 +1558,14 @@ PTREGS_SYSCALL_ALL_REGS(sys_cmpxchg_badaddr, r1)
* to be available to it on entry. It does not modify any callee-save
* registers (including "lr"). It does not check what PL it is being
* called at, so you'd better not call it other than at PL0.
+ * The <atomic.h> wrapper assumes it only clobbers r20-r29, so if
+ * it ever is necessary to use more registers, be aware.
*
* It does not use the stack, but since it might be re-interrupted by
* a page fault which would assume the stack was valid, it does
* save/restore the stack pointer and zero it out to make sure it gets reset.
* Since we always keep interrupts disabled, the hypervisor won't
- * clobber our EX_CONTEXT_1_x registers, so we don't save/restore them
+ * clobber our EX_CONTEXT_K_x registers, so we don't save/restore them
* (other than to advance the PC on return).
*
* We have to manually validate the user vs kernel address range
@@ -1769,7 +1771,7 @@ ENTRY(sys_cmpxchg)
/* Do slow mtspr here so the following "mf" waits less. */
{
move sp, r27
- mtspr EX_CONTEXT_1_0, r28
+ mtspr SPR_EX_CONTEXT_K_0, r28
}
mf
@@ -1788,7 +1790,7 @@ ENTRY(sys_cmpxchg)
}
{
move sp, r27
- mtspr EX_CONTEXT_1_0, r28
+ mtspr SPR_EX_CONTEXT_K_0, r28
}
iret
@@ -1816,7 +1818,7 @@ ENTRY(sys_cmpxchg)
#endif
/* Issue the slow SPR here while the tns result is in flight. */
- mfspr r28, EX_CONTEXT_1_0
+ mfspr r28, SPR_EX_CONTEXT_K_0
{
addi r28, r28, 8 /* return to the instruction after the swint1 */
@@ -1904,7 +1906,7 @@ ENTRY(sys_cmpxchg)
.Lcmpxchg64_mismatch:
{
move sp, r27
- mtspr EX_CONTEXT_1_0, r28
+ mtspr SPR_EX_CONTEXT_K_0, r28
}
mf
{
@@ -1985,8 +1987,13 @@ int_unalign:
int_hand INT_PERF_COUNT, PERF_COUNT, \
op_handle_perf_interrupt, handle_nmi
int_hand INT_INTCTRL_3, INTCTRL_3, bad_intr
+#if CONFIG_KERNEL_PL == 2
+ dc_dispatch INT_INTCTRL_2, INTCTRL_2
+ int_hand INT_INTCTRL_1, INTCTRL_1, bad_intr
+#else
int_hand INT_INTCTRL_2, INTCTRL_2, bad_intr
dc_dispatch INT_INTCTRL_1, INTCTRL_1
+#endif
int_hand INT_INTCTRL_0, INTCTRL_0, bad_intr
int_hand INT_MESSAGE_RCV_DWNCL, MESSAGE_RCV_DWNCL, \
hv_message_intr, handle_interrupt_downcall
diff --git a/arch/tile/kernel/irq.c b/arch/tile/kernel/irq.c
index 9a27d563fc30..e63917687e99 100644
--- a/arch/tile/kernel/irq.c
+++ b/arch/tile/kernel/irq.c
@@ -61,9 +61,9 @@ static DEFINE_SPINLOCK(available_irqs_lock);
#if CHIP_HAS_IPI()
/* Use SPRs to manipulate device interrupts. */
-#define mask_irqs(irq_mask) __insn_mtspr(SPR_IPI_MASK_SET_1, irq_mask)
-#define unmask_irqs(irq_mask) __insn_mtspr(SPR_IPI_MASK_RESET_1, irq_mask)
-#define clear_irqs(irq_mask) __insn_mtspr(SPR_IPI_EVENT_RESET_1, irq_mask)
+#define mask_irqs(irq_mask) __insn_mtspr(SPR_IPI_MASK_SET_K, irq_mask)
+#define unmask_irqs(irq_mask) __insn_mtspr(SPR_IPI_MASK_RESET_K, irq_mask)
+#define clear_irqs(irq_mask) __insn_mtspr(SPR_IPI_EVENT_RESET_K, irq_mask)
#else
/* Use HV to manipulate device interrupts. */
#define mask_irqs(irq_mask) hv_disable_intr(irq_mask)
@@ -89,16 +89,16 @@ void tile_dev_intr(struct pt_regs *regs, int intnum)
* masked by a previous interrupt. Then, mask out the ones
* we're going to handle.
*/
- unsigned long masked = __insn_mfspr(SPR_IPI_MASK_1);
- original_irqs = __insn_mfspr(SPR_IPI_EVENT_1) & ~masked;
- __insn_mtspr(SPR_IPI_MASK_SET_1, original_irqs);
+ unsigned long masked = __insn_mfspr(SPR_IPI_MASK_K);
+ original_irqs = __insn_mfspr(SPR_IPI_EVENT_K) & ~masked;
+ __insn_mtspr(SPR_IPI_MASK_SET_K, original_irqs);
#else
/*
* Hypervisor performs the equivalent of the Gx code above and
* then puts the pending interrupt mask into a system save reg
* for us to find.
*/
- original_irqs = __insn_mfspr(SPR_SYSTEM_SAVE_1_3);
+ original_irqs = __insn_mfspr(SPR_SYSTEM_SAVE_K_3);
#endif
remaining_irqs = original_irqs;
@@ -225,7 +225,7 @@ void __cpuinit setup_irq_regs(void)
/* Enable interrupt delivery. */
unmask_irqs(~0UL);
#if CHIP_HAS_IPI()
- raw_local_irq_unmask(INT_IPI_1);
+ raw_local_irq_unmask(INT_IPI_K);
#endif
}
diff --git a/arch/tile/kernel/messaging.c b/arch/tile/kernel/messaging.c
index 6d23ed271d10..997e3933f726 100644
--- a/arch/tile/kernel/messaging.c
+++ b/arch/tile/kernel/messaging.c
@@ -34,7 +34,7 @@ void __cpuinit init_messaging(void)
panic("hv_register_message_state: error %d", rc);
/* Make sure downcall interrupts will be enabled. */
- raw_local_irq_unmask(INT_INTCTRL_1);
+ raw_local_irq_unmask(INT_INTCTRL_K);
}
void hv_message_intr(struct pt_regs *regs, int intnum)
diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c
index 84c29111756c..8430f45daea6 100644
--- a/arch/tile/kernel/process.c
+++ b/arch/tile/kernel/process.c
@@ -214,9 +214,10 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
/*
* Copy the callee-saved registers from the passed pt_regs struct
* into the context-switch callee-saved registers area.
- * We have to restore the callee-saved registers since we may
- * be cloning a userspace task with userspace register state,
- * and we won't be unwinding the same kernel frames to restore them.
+ * This way when we start the interrupt-return sequence, the
+ * callee-save registers will be correctly in registers, which
+ * is how we assume the compiler leaves them as we start doing
+ * the normal return-from-interrupt path after calling C code.
* Zero out the C ABI save area to mark the top of the stack.
*/
ksp = (unsigned long) childregs;
@@ -304,15 +305,25 @@ int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs)
/* Allow user processes to access the DMA SPRs */
void grant_dma_mpls(void)
{
+#if CONFIG_KERNEL_PL == 2
+ __insn_mtspr(SPR_MPL_DMA_CPL_SET_1, 1);
+ __insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_1, 1);
+#else
__insn_mtspr(SPR_MPL_DMA_CPL_SET_0, 1);
__insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_0, 1);
+#endif
}
/* Forbid user processes from accessing the DMA SPRs */
void restrict_dma_mpls(void)
{
+#if CONFIG_KERNEL_PL == 2
+ __insn_mtspr(SPR_MPL_DMA_CPL_SET_2, 1);
+ __insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_2, 1);
+#else
__insn_mtspr(SPR_MPL_DMA_CPL_SET_1, 1);
__insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_1, 1);
+#endif
}
/* Pause the DMA engine, then save off its state registers. */
@@ -523,19 +534,14 @@ struct task_struct *__sched _switch_to(struct task_struct *prev,
* Switch kernel SP, PC, and callee-saved registers.
* In the context of the new task, return the old task pointer
* (i.e. the task that actually called __switch_to).
- * Pass the value to use for SYSTEM_SAVE_1_0 when we reset our sp.
+ * Pass the value to use for SYSTEM_SAVE_K_0 when we reset our sp.
*/
return __switch_to(prev, next, next_current_ksp0(next));
}
-long _sys_fork(struct pt_regs *regs)
-{
- return do_fork(SIGCHLD, regs->sp, regs, 0, NULL, NULL);
-}
-
-long _sys_clone(unsigned long clone_flags, unsigned long newsp,
- void __user *parent_tidptr, void __user *child_tidptr,
- struct pt_regs *regs)
+SYSCALL_DEFINE5(clone, unsigned long, clone_flags, unsigned long, newsp,
+ void __user *, parent_tidptr, void __user *, child_tidptr,
+ struct pt_regs *, regs)
{
if (!newsp)
newsp = regs->sp;
@@ -543,18 +549,13 @@ long _sys_clone(unsigned long clone_flags, unsigned long newsp,
parent_tidptr, child_tidptr);
}
-long _sys_vfork(struct pt_regs *regs)
-{
- return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->sp,
- regs, 0, NULL, NULL);
-}
-
/*
* sys_execve() executes a new program.
*/
-long _sys_execve(const char __user *path,
- const char __user *const __user *argv,
- const char __user *const __user *envp, struct pt_regs *regs)
+SYSCALL_DEFINE4(execve, const char __user *, path,
+ const char __user *const __user *, argv,
+ const char __user *const __user *, envp,
+ struct pt_regs *, regs)
{
long error;
char *filename;
@@ -570,9 +571,10 @@ out:
}
#ifdef CONFIG_COMPAT
-long _compat_sys_execve(const char __user *path,
- const compat_uptr_t __user *argv,
- const compat_uptr_t __user *envp, struct pt_regs *regs)
+long compat_sys_execve(const char __user *path,
+ const compat_uptr_t __user *argv,
+ const compat_uptr_t __user *envp,
+ struct pt_regs *regs)
{
long error;
char *filename;
diff --git a/arch/tile/kernel/ptrace.c b/arch/tile/kernel/ptrace.c
index 7161bd03d2fd..5b20c2874d51 100644
--- a/arch/tile/kernel/ptrace.c
+++ b/arch/tile/kernel/ptrace.c
@@ -32,25 +32,6 @@ void user_disable_single_step(struct task_struct *child)
}
/*
- * This routine will put a word on the process's privileged stack.
- */
-static void putreg(struct task_struct *task,
- unsigned long addr, unsigned long value)
-{
- unsigned int regno = addr / sizeof(unsigned long);
- struct pt_regs *childregs = task_pt_regs(task);
- childregs->regs[regno] = value;
- childregs->flags |= PT_FLAGS_RESTORE_REGS;
-}
-
-static unsigned long getreg(struct task_struct *task, unsigned long addr)
-{
- unsigned int regno = addr / sizeof(unsigned long);
- struct pt_regs *childregs = task_pt_regs(task);
- return childregs->regs[regno];
-}
-
-/*
* Called by kernel/ptrace.c when detaching..
*/
void ptrace_disable(struct task_struct *child)
@@ -66,59 +47,72 @@ void ptrace_disable(struct task_struct *child)
long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
- unsigned long __user *datap;
+ unsigned long __user *datap = (long __user __force *)data;
unsigned long tmp;
int i;
long ret = -EIO;
-
-#ifdef CONFIG_COMPAT
- if (task_thread_info(current)->status & TS_COMPAT)
- data = (u32)data;
- if (task_thread_info(child)->status & TS_COMPAT)
- addr = (u32)addr;
-#endif
- datap = (unsigned long __user __force *)data;
+ unsigned long *childregs;
+ char *childreg;
switch (request) {
case PTRACE_PEEKUSR: /* Read register from pt_regs. */
- if (addr & (sizeof(data)-1))
- break;
if (addr < 0 || addr >= PTREGS_SIZE)
break;
- tmp = getreg(child, addr); /* Read register */
- ret = put_user(tmp, datap);
+ childreg = (char *)task_pt_regs(child) + addr;
+#ifdef CONFIG_COMPAT
+ if (is_compat_task()) {
+ if (addr & (sizeof(compat_long_t)-1))
+ break;
+ ret = put_user(*(compat_long_t *)childreg,
+ (compat_long_t __user *)datap);
+ } else
+#endif
+ {
+ if (addr & (sizeof(long)-1))
+ break;
+ ret = put_user(*(long *)childreg, datap);
+ }
break;
case PTRACE_POKEUSR: /* Write register in pt_regs. */
- if (addr & (sizeof(data)-1))
- break;
if (addr < 0 || addr >= PTREGS_SIZE)
break;
- putreg(child, addr, data); /* Write register */
+ childreg = (char *)task_pt_regs(child) + addr;
+#ifdef CONFIG_COMPAT
+ if (is_compat_task()) {
+ if (addr & (sizeof(compat_long_t)-1))
+ break;
+ *(compat_long_t *)childreg = data;
+ } else
+#endif
+ {
+ if (addr & (sizeof(long)-1))
+ break;
+ *(long *)childreg = data;
+ }
ret = 0;
break;
case PTRACE_GETREGS: /* Get all registers from the child. */
if (!access_ok(VERIFY_WRITE, datap, PTREGS_SIZE))
break;
- for (i = 0; i < PTREGS_SIZE; i += sizeof(long)) {
- ret = __put_user(getreg(child, i), datap);
+ childregs = (long *)task_pt_regs(child);
+ for (i = 0; i < sizeof(struct pt_regs)/sizeof(long); ++i) {
+ ret = __put_user(childregs[i], &datap[i]);
if (ret != 0)
break;
- datap++;
}
break;
case PTRACE_SETREGS: /* Set all registers in the child. */
if (!access_ok(VERIFY_READ, datap, PTREGS_SIZE))
break;
- for (i = 0; i < PTREGS_SIZE; i += sizeof(long)) {
- ret = __get_user(tmp, datap);
+ childregs = (long *)task_pt_regs(child);
+ for (i = 0; i < sizeof(struct pt_regs)/sizeof(long); ++i) {
+ ret = __get_user(childregs[i], &datap[i]);
if (ret != 0)
break;
- putreg(child, i, tmp);
- datap++;
}
break;
diff --git a/arch/tile/kernel/regs_32.S b/arch/tile/kernel/regs_32.S
index e88d6e122783..caa13101c264 100644
--- a/arch/tile/kernel/regs_32.S
+++ b/arch/tile/kernel/regs_32.S
@@ -85,7 +85,7 @@ STD_ENTRY_SECTION(__switch_to, .sched.text)
{
/* Update sp and ksp0 simultaneously to avoid backtracer warnings. */
move sp, r13
- mtspr SYSTEM_SAVE_1_0, r2
+ mtspr SPR_SYSTEM_SAVE_K_0, r2
}
FOR_EACH_CALLEE_SAVED_REG(LOAD_REG)
.L__switch_to_pc:
diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c
index e7d54c73d5c1..f3a50e74f9a4 100644
--- a/arch/tile/kernel/setup.c
+++ b/arch/tile/kernel/setup.c
@@ -187,11 +187,11 @@ early_param("vmalloc", parse_vmalloc);
#ifdef CONFIG_HIGHMEM
/*
- * Determine for each controller where its lowmem is mapped and how
- * much of it is mapped there. On controller zero, the first few
- * megabytes are mapped at 0xfd000000 as code, so in principle we
- * could start our data mappings higher up, but for now we don't
- * bother, to avoid additional confusion.
+ * Determine for each controller where its lowmem is mapped and how much of
+ * it is mapped there. On controller zero, the first few megabytes are
+ * already mapped in as code at MEM_SV_INTRPT, so in principle we could
+ * start our data mappings higher up, but for now we don't bother, to avoid
+ * additional confusion.
*
* One question is whether, on systems with more than 768 Mb and
* controllers of different sizes, to map in a proportionate amount of
@@ -311,7 +311,7 @@ static void __init setup_memory(void)
#endif
/* We are using a char to hold the cpu_2_node[] mapping */
- BUG_ON(MAX_NUMNODES > 127);
+ BUILD_BUG_ON(MAX_NUMNODES > 127);
/* Discover the ranges of memory available to us */
for (i = 0; ; ++i) {
@@ -876,6 +876,9 @@ void __cpuinit setup_cpu(int boot)
#if CHIP_HAS_SN_PROC()
raw_local_irq_unmask(INT_SNITLB_MISS);
#endif
+#ifdef __tilegx__
+ raw_local_irq_unmask(INT_SINGLE_STEP_K);
+#endif
/*
* Allow user access to many generic SPRs, like the cycle
@@ -893,11 +896,12 @@ void __cpuinit setup_cpu(int boot)
#endif
/*
- * Set the MPL for interrupt control 0 to user level.
- * This includes access to the SYSTEM_SAVE and EX_CONTEXT SPRs,
- * as well as the PL 0 interrupt mask.
+ * Set the MPL for interrupt control 0 & 1 to the corresponding
+ * values. This includes access to the SYSTEM_SAVE and EX_CONTEXT
+ * SPRs, as well as the interrupt mask.
*/
__insn_mtspr(SPR_MPL_INTCTRL_0_SET_0, 1);
+ __insn_mtspr(SPR_MPL_INTCTRL_1_SET_1, 1);
/* Initialize IRQ support for this cpu. */
setup_irq_regs();
@@ -1033,7 +1037,7 @@ static void __init validate_va(void)
* In addition, make sure we CAN'T use the end of memory, since
* we use the last chunk of each pgd for the pgd_list.
*/
- int i, fc_fd_ok = 0;
+ int i, user_kernel_ok = 0;
unsigned long max_va = 0;
unsigned long list_va =
((PGD_LIST_OFFSET / sizeof(pgd_t)) << PGDIR_SHIFT);
@@ -1044,13 +1048,13 @@ static void __init validate_va(void)
break;
if (range.start <= MEM_USER_INTRPT &&
range.start + range.size >= MEM_HV_INTRPT)
- fc_fd_ok = 1;
+ user_kernel_ok = 1;
if (range.start == 0)
max_va = range.size;
BUG_ON(range.start + range.size > list_va);
}
- if (!fc_fd_ok)
- early_panic("Hypervisor not configured for VAs 0xfc/0xfd\n");
+ if (!user_kernel_ok)
+ early_panic("Hypervisor not configured for user/kernel VAs\n");
if (max_va == 0)
early_panic("Hypervisor not configured for low VAs\n");
if (max_va < KERNEL_HIGH_VADDR)
@@ -1334,6 +1338,10 @@ static void __init pcpu_fc_populate_pte(unsigned long addr)
pte_t *pte;
BUG_ON(pgd_addr_invalid(addr));
+ if (addr < VMALLOC_START || addr >= VMALLOC_END)
+ panic("PCPU addr %#lx outside vmalloc range %#lx..%#lx;"
+ " try increasing CONFIG_VMALLOC_RESERVE\n",
+ addr, VMALLOC_START, VMALLOC_END);
pgd = swapper_pg_dir + pgd_index(addr);
pud = pud_offset(pgd, addr);
diff --git a/arch/tile/kernel/signal.c b/arch/tile/kernel/signal.c
index ce183aa1492c..fb28e85ae3ae 100644
--- a/arch/tile/kernel/signal.c
+++ b/arch/tile/kernel/signal.c
@@ -41,8 +41,8 @@
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-long _sys_sigaltstack(const stack_t __user *uss,
- stack_t __user *uoss, struct pt_regs *regs)
+SYSCALL_DEFINE3(sigaltstack, const stack_t __user *, uss,
+ stack_t __user *, uoss, struct pt_regs *, regs)
{
return do_sigaltstack(uss, uoss, regs->sp);
}
@@ -78,7 +78,7 @@ int restore_sigcontext(struct pt_regs *regs,
}
/* sigreturn() returns long since it restores r0 in the interrupted code. */
-long _sys_rt_sigreturn(struct pt_regs *regs)
+SYSCALL_DEFINE1(rt_sigreturn, struct pt_regs *, regs)
{
struct rt_sigframe __user *frame =
(struct rt_sigframe __user *)(regs->sp);
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
index 5ec4b9c651f2..1eb3b39e36c7 100644
--- a/arch/tile/kernel/single_step.c
+++ b/arch/tile/kernel/single_step.c
@@ -15,7 +15,7 @@
* Derived from iLib's single-stepping code.
*/
-#ifndef __tilegx__ /* No support for single-step yet. */
+#ifndef __tilegx__ /* Hardware support for single step unavailable. */
/* These functions are only used on the TILE platform */
#include <linux/slab.h>
@@ -660,4 +660,75 @@ void single_step_once(struct pt_regs *regs)
regs->pc += 8;
}
+#else
+#include <linux/smp.h>
+#include <linux/ptrace.h>
+#include <arch/spr_def.h>
+
+static DEFINE_PER_CPU(unsigned long, ss_saved_pc);
+
+
+/*
+ * Called directly on the occasion of an interrupt.
+ *
+ * If the process doesn't have single step set, then we use this as an
+ * opportunity to turn single step off.
+ *
+ * It has been mentioned that we could conditionally turn off single stepping
+ * on each entry into the kernel and rely on single_step_once to turn it
+ * on for the processes that matter (as we already do), but this
+ * implementation is somewhat more efficient in that we muck with registers
+ * once on a bum interrupt rather than on every entry into the kernel.
+ *
+ * If SINGLE_STEP_CONTROL_K has CANCELED set, then an interrupt occurred,
+ * so we have to run through this process again before we can say that an
+ * instruction has executed.
+ *
+ * swint will set CANCELED, but it's a legitimate instruction. Fortunately
+ * it changes the PC. If it hasn't changed, then we know that the interrupt
+ * wasn't generated by swint and we'll need to run this process again before
+ * we can say an instruction has executed.
+ *
+ * If either CANCELED == 0 or the PC's changed, we send out SIGTRAPs and get
+ * on with our lives.
+ */
+
+void gx_singlestep_handle(struct pt_regs *regs, int fault_num)
+{
+ unsigned long *ss_pc = &__get_cpu_var(ss_saved_pc);
+ struct thread_info *info = (void *)current_thread_info();
+ int is_single_step = test_ti_thread_flag(info, TIF_SINGLESTEP);
+ unsigned long control = __insn_mfspr(SPR_SINGLE_STEP_CONTROL_K);
+
+ if (is_single_step == 0) {
+ __insn_mtspr(SPR_SINGLE_STEP_EN_K_K, 0);
+
+ } else if ((*ss_pc != regs->pc) ||
+ (!(control & SPR_SINGLE_STEP_CONTROL_1__CANCELED_MASK))) {
+
+ ptrace_notify(SIGTRAP);
+ control |= SPR_SINGLE_STEP_CONTROL_1__CANCELED_MASK;
+ control |= SPR_SINGLE_STEP_CONTROL_1__INHIBIT_MASK;
+ __insn_mtspr(SPR_SINGLE_STEP_CONTROL_K, control);
+ }
+}
+
+
+/*
+ * Called from need_singlestep. Set up the control registers and the enable
+ * register, then return back.
+ */
+
+void single_step_once(struct pt_regs *regs)
+{
+ unsigned long *ss_pc = &__get_cpu_var(ss_saved_pc);
+ unsigned long control = __insn_mfspr(SPR_SINGLE_STEP_CONTROL_K);
+
+ *ss_pc = regs->pc;
+ control |= SPR_SINGLE_STEP_CONTROL_1__CANCELED_MASK;
+ control |= SPR_SINGLE_STEP_CONTROL_1__INHIBIT_MASK;
+ __insn_mtspr(SPR_SINGLE_STEP_CONTROL_K, control);
+ __insn_mtspr(SPR_SINGLE_STEP_EN_K_K, 1 << USER_PL);
+}
+
#endif /* !__tilegx__ */
diff --git a/arch/tile/kernel/smp.c b/arch/tile/kernel/smp.c
index 1cb5ec79de04..75255d90aff3 100644
--- a/arch/tile/kernel/smp.c
+++ b/arch/tile/kernel/smp.c
@@ -212,7 +212,7 @@ void __init ipi_init(void)
tile.x = cpu_x(cpu);
tile.y = cpu_y(cpu);
- if (hv_get_ipi_pte(tile, 1, &pte) != 0)
+ if (hv_get_ipi_pte(tile, KERNEL_PL, &pte) != 0)
panic("Failed to initialize IPI for cpu %d\n", cpu);
offset = hv_pte_get_pfn(pte) << PAGE_SHIFT;
diff --git a/arch/tile/kernel/stack.c b/arch/tile/kernel/stack.c
index ea2e0ce28380..0d54106be3d6 100644
--- a/arch/tile/kernel/stack.c
+++ b/arch/tile/kernel/stack.c
@@ -30,6 +30,10 @@
#include <arch/abi.h>
#include <arch/interrupts.h>
+#define KBT_ONGOING 0 /* Backtrace still ongoing */
+#define KBT_DONE 1 /* Backtrace cleanly completed */
+#define KBT_RUNNING 2 /* Can't run backtrace on a running task */
+#define KBT_LOOP 3 /* Backtrace entered a loop */
/* Is address on the specified kernel stack? */
static int in_kernel_stack(struct KBacktraceIterator *kbt, VirtualAddress sp)
@@ -207,11 +211,11 @@ static int KBacktraceIterator_next_item_inclusive(
for (;;) {
do {
if (!KBacktraceIterator_is_sigreturn(kbt))
- return 1;
+ return KBT_ONGOING;
} while (backtrace_next(&kbt->it));
if (!KBacktraceIterator_restart(kbt))
- return 0;
+ return KBT_DONE;
}
}
@@ -264,7 +268,7 @@ void KBacktraceIterator_init(struct KBacktraceIterator *kbt,
kbt->pgtable = NULL;
kbt->verbose = 0; /* override in caller if desired */
kbt->profile = 0; /* override in caller if desired */
- kbt->end = 0;
+ kbt->end = KBT_ONGOING;
kbt->new_context = 0;
if (is_current) {
HV_PhysAddr pgdir_pa = hv_inquire_context().page_table;
@@ -290,7 +294,7 @@ void KBacktraceIterator_init(struct KBacktraceIterator *kbt,
if (regs == NULL) {
if (is_current || t->state == TASK_RUNNING) {
/* Can't do this; we need registers */
- kbt->end = 1;
+ kbt->end = KBT_RUNNING;
return;
}
pc = get_switch_to_pc();
@@ -305,26 +309,29 @@ void KBacktraceIterator_init(struct KBacktraceIterator *kbt,
}
backtrace_init(&kbt->it, read_memory_func, kbt, pc, lr, sp, r52);
- kbt->end = !KBacktraceIterator_next_item_inclusive(kbt);
+ kbt->end = KBacktraceIterator_next_item_inclusive(kbt);
}
EXPORT_SYMBOL(KBacktraceIterator_init);
int KBacktraceIterator_end(struct KBacktraceIterator *kbt)
{
- return kbt->end;
+ return kbt->end != KBT_ONGOING;
}
EXPORT_SYMBOL(KBacktraceIterator_end);
void KBacktraceIterator_next(struct KBacktraceIterator *kbt)
{
+ VirtualAddress old_pc = kbt->it.pc, old_sp = kbt->it.sp;
kbt->new_context = 0;
- if (!backtrace_next(&kbt->it) &&
- !KBacktraceIterator_restart(kbt)) {
- kbt->end = 1;
- return;
- }
-
- kbt->end = !KBacktraceIterator_next_item_inclusive(kbt);
+ if (!backtrace_next(&kbt->it) && !KBacktraceIterator_restart(kbt)) {
+ kbt->end = KBT_DONE;
+ return;
+ }
+ kbt->end = KBacktraceIterator_next_item_inclusive(kbt);
+ if (old_pc == kbt->it.pc && old_sp == kbt->it.sp) {
+ /* Trapped in a loop; give up. */
+ kbt->end = KBT_LOOP;
+ }
}
EXPORT_SYMBOL(KBacktraceIterator_next);
@@ -387,6 +394,8 @@ void tile_show_stack(struct KBacktraceIterator *kbt, int headers)
break;
}
}
+ if (kbt->end == KBT_LOOP)
+ pr_err("Stack dump stopped; next frame identical to this one\n");
if (headers)
pr_err("Stack dump complete\n");
}
diff --git a/arch/tile/kernel/sys.c b/arch/tile/kernel/sys.c
index f0f87eab8c39..7e764669a022 100644
--- a/arch/tile/kernel/sys.c
+++ b/arch/tile/kernel/sys.c
@@ -110,6 +110,15 @@ SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len,
#define sys_sync_file_range sys_sync_file_range2
#endif
+/* Call the trampolines to manage pt_regs where necessary. */
+#define sys_execve _sys_execve
+#define sys_sigaltstack _sys_sigaltstack
+#define sys_rt_sigreturn _sys_rt_sigreturn
+#define sys_clone _sys_clone
+#ifndef __tilegx__
+#define sys_cmpxchg_badaddr _sys_cmpxchg_badaddr
+#endif
+
/*
* Note that we can't include <linux/unistd.h> here since the header
* guard will defeat us; <asm/unistd.h> checks for __SYSCALL as well.
diff --git a/arch/tile/kernel/traps.c b/arch/tile/kernel/traps.c
index 0f362dc2c57f..5474fc2e77e8 100644
--- a/arch/tile/kernel/traps.c
+++ b/arch/tile/kernel/traps.c
@@ -260,7 +260,7 @@ void __kprobes do_trap(struct pt_regs *regs, int fault_num,
address = regs->pc;
break;
case INT_UNALIGN_DATA:
-#ifndef __tilegx__ /* FIXME: GX: no single-step yet */
+#ifndef __tilegx__ /* Emulated support for single step debugging */
if (unaligned_fixup >= 0) {
struct single_step_state *state =
current_thread_info()->step_state;
@@ -278,7 +278,7 @@ void __kprobes do_trap(struct pt_regs *regs, int fault_num,
case INT_DOUBLE_FAULT:
/*
* For double fault, "reason" is actually passed as
- * SYSTEM_SAVE_1_2, the hypervisor's double-fault info, so
+ * SYSTEM_SAVE_K_2, the hypervisor's double-fault info, so
* we can provide the original fault number rather than
* the uninteresting "INT_DOUBLE_FAULT" so the user can
* learn what actually struck while PL0 ICS was set.
diff --git a/arch/tile/kvm/Kconfig b/arch/tile/kvm/Kconfig
new file mode 100644
index 000000000000..b88f9c047781
--- /dev/null
+++ b/arch/tile/kvm/Kconfig
@@ -0,0 +1,38 @@
+#
+# KVM configuration
+#
+
+source "virt/kvm/Kconfig"
+
+menuconfig VIRTUALIZATION
+ bool "Virtualization"
+ ---help---
+ Say Y here to get to see options for using your Linux host to run
+ other operating systems inside virtual machines (guests).
+ This option alone does not add any kernel code.
+
+ If you say N, all options in this submenu will be skipped and
+ disabled.
+
+if VIRTUALIZATION
+
+config KVM
+ tristate "Kernel-based Virtual Machine (KVM) support"
+ depends on HAVE_KVM && MODULES && EXPERIMENTAL
+ select PREEMPT_NOTIFIERS
+ select ANON_INODES
+ ---help---
+ Support hosting paravirtualized guest machines.
+
+ This module provides access to the hardware capabilities through
+ a character device node named /dev/kvm.
+
+ To compile this as a module, choose M here: the module
+ will be called kvm.
+
+ If unsure, say N.
+
+source drivers/vhost/Kconfig
+source drivers/virtio/Kconfig
+
+endif # VIRTUALIZATION
diff --git a/arch/tile/lib/Makefile b/arch/tile/lib/Makefile
index 746dc81ed3c4..93122d5b1558 100644
--- a/arch/tile/lib/Makefile
+++ b/arch/tile/lib/Makefile
@@ -3,8 +3,8 @@
#
lib-y = cacheflush.o checksum.o cpumask.o delay.o \
- mb_incoherent.o uaccess.o \
- memcpy_$(BITS).o memchr_$(BITS).o memmove_$(BITS).o memset_$(BITS).o \
+ mb_incoherent.o uaccess.o memmove.o \
+ memcpy_$(BITS).o memchr_$(BITS).o memset_$(BITS).o \
strchr_$(BITS).o strlen_$(BITS).o
ifeq ($(CONFIG_TILEGX),y)
diff --git a/arch/tile/lib/atomic_32.c b/arch/tile/lib/atomic_32.c
index 8040b42a8eea..7a5cc706ab62 100644
--- a/arch/tile/lib/atomic_32.c
+++ b/arch/tile/lib/atomic_32.c
@@ -300,7 +300,7 @@ void __init __init_atomic_per_cpu(void)
#else /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
/* Validate power-of-two and "bigger than cpus" assumption */
- BUG_ON(ATOMIC_HASH_SIZE & (ATOMIC_HASH_SIZE-1));
+ BUILD_BUG_ON(ATOMIC_HASH_SIZE & (ATOMIC_HASH_SIZE-1));
BUG_ON(ATOMIC_HASH_SIZE < nr_cpu_ids);
/*
@@ -314,17 +314,17 @@ void __init __init_atomic_per_cpu(void)
BUG_ON((unsigned long)atomic_locks % PAGE_SIZE != 0);
/* The locks must all fit on one page. */
- BUG_ON(ATOMIC_HASH_SIZE * sizeof(int) > PAGE_SIZE);
+ BUILD_BUG_ON(ATOMIC_HASH_SIZE * sizeof(int) > PAGE_SIZE);
/*
* We use the page offset of the atomic value's address as
* an index into atomic_locks, excluding the low 3 bits.
* That should not produce more indices than ATOMIC_HASH_SIZE.
*/
- BUG_ON((PAGE_SIZE >> 3) > ATOMIC_HASH_SIZE);
+ BUILD_BUG_ON((PAGE_SIZE >> 3) > ATOMIC_HASH_SIZE);
#endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
/* The futex code makes this assumption, so we validate it here. */
- BUG_ON(sizeof(atomic_t) != sizeof(int));
+ BUILD_BUG_ON(sizeof(atomic_t) != sizeof(int));
}
diff --git a/arch/tile/lib/exports.c b/arch/tile/lib/exports.c
index ce5dbf56578f..1509c5597653 100644
--- a/arch/tile/lib/exports.c
+++ b/arch/tile/lib/exports.c
@@ -45,6 +45,9 @@ EXPORT_SYMBOL(__copy_from_user_zeroing);
EXPORT_SYMBOL(__copy_in_user_inatomic);
#endif
+/* arch/tile/lib/mb_incoherent.S */
+EXPORT_SYMBOL(__mb_incoherent);
+
/* hypervisor glue */
#include <hv/hypervisor.h>
EXPORT_SYMBOL(hv_dev_open);
diff --git a/arch/tile/lib/memcpy_32.S b/arch/tile/lib/memcpy_32.S
index 30c3b7ebb55d..2a419a6122db 100644
--- a/arch/tile/lib/memcpy_32.S
+++ b/arch/tile/lib/memcpy_32.S
@@ -10,14 +10,16 @@
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for
* more details.
- *
- * This file shares the implementation of the userspace memcpy and
- * the kernel's memcpy, copy_to_user and copy_from_user.
*/
#include <arch/chip.h>
+/*
+ * This file shares the implementation of the userspace memcpy and
+ * the kernel's memcpy, copy_to_user and copy_from_user.
+ */
+
#include <linux/linkage.h>
/* On TILE64, we wrap these functions via arch/tile/lib/memcpy_tile64.c */
@@ -53,9 +55,9 @@
*/
ENTRY(__copy_from_user_inatomic)
.type __copy_from_user_inatomic, @function
- FEEDBACK_ENTER_EXPLICIT(__copy_from_user_inatomic, \
+ FEEDBACK_ENTER_EXPLICIT(__copy_from_user_inatomic, \
.text.memcpy_common, \
- .Lend_memcpy_common - __copy_from_user_inatomic)
+ .Lend_memcpy_common - __copy_from_user_inatomic)
{ movei r29, IS_COPY_FROM_USER; j memcpy_common }
.size __copy_from_user_inatomic, . - __copy_from_user_inatomic
@@ -64,7 +66,7 @@ ENTRY(__copy_from_user_inatomic)
*/
ENTRY(__copy_from_user_zeroing)
.type __copy_from_user_zeroing, @function
- FEEDBACK_REENTER(__copy_from_user_inatomic)
+ FEEDBACK_REENTER(__copy_from_user_inatomic)
{ movei r29, IS_COPY_FROM_USER_ZEROING; j memcpy_common }
.size __copy_from_user_zeroing, . - __copy_from_user_zeroing
@@ -74,13 +76,13 @@ ENTRY(__copy_from_user_zeroing)
*/
ENTRY(__copy_to_user_inatomic)
.type __copy_to_user_inatomic, @function
- FEEDBACK_REENTER(__copy_from_user_inatomic)
+ FEEDBACK_REENTER(__copy_from_user_inatomic)
{ movei r29, IS_COPY_TO_USER; j memcpy_common }
.size __copy_to_user_inatomic, . - __copy_to_user_inatomic
ENTRY(memcpy)
.type memcpy, @function
- FEEDBACK_REENTER(__copy_from_user_inatomic)
+ FEEDBACK_REENTER(__copy_from_user_inatomic)
{ movei r29, IS_MEMCPY }
.size memcpy, . - memcpy
/* Fall through */
@@ -157,35 +159,35 @@ EX: { sw r0, r3; addi r0, r0, 4; addi r2, r2, -4 }
{ addi r3, r1, 60; andi r9, r9, -64 }
#if CHIP_HAS_WH64()
- /* No need to prefetch dst, we'll just do the wh64
- * right before we copy a line.
+ /* No need to prefetch dst, we'll just do the wh64
+ * right before we copy a line.
*/
#endif
EX: { lw r5, r3; addi r3, r3, 64; movei r4, 1 }
- /* Intentionally stall for a few cycles to leave L2 cache alone. */
- { bnzt zero, .; move r27, lr }
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bnzt zero, .; move r27, lr }
EX: { lw r6, r3; addi r3, r3, 64 }
- /* Intentionally stall for a few cycles to leave L2 cache alone. */
- { bnzt zero, . }
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bnzt zero, . }
EX: { lw r7, r3; addi r3, r3, 64 }
#if !CHIP_HAS_WH64()
- /* Prefetch the dest */
- /* Intentionally stall for a few cycles to leave L2 cache alone. */
- { bnzt zero, . }
- /* Use a real load to cause a TLB miss if necessary. We aren't using
- * r28, so this should be fine.
- */
+ /* Prefetch the dest */
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bnzt zero, . }
+ /* Use a real load to cause a TLB miss if necessary. We aren't using
+ * r28, so this should be fine.
+ */
EX: { lw r28, r9; addi r9, r9, 64 }
- /* Intentionally stall for a few cycles to leave L2 cache alone. */
- { bnzt zero, . }
- { prefetch r9; addi r9, r9, 64 }
- /* Intentionally stall for a few cycles to leave L2 cache alone. */
- { bnzt zero, . }
- { prefetch r9; addi r9, r9, 64 }
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bnzt zero, . }
+ { prefetch r9; addi r9, r9, 64 }
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bnzt zero, . }
+ { prefetch r9; addi r9, r9, 64 }
#endif
- /* Intentionally stall for a few cycles to leave L2 cache alone. */
- { bz zero, .Lbig_loop2 }
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bz zero, .Lbig_loop2 }
/* On entry to this loop:
* - r0 points to the start of dst line 0
@@ -197,7 +199,7 @@ EX: { lw r28, r9; addi r9, r9, 64 }
* to some "safe" recently loaded address.
* - r5 contains *(r1 + 60) [i.e. last word of source line 0]
* - r6 contains *(r1 + 64 + 60) [i.e. last word of source line 1]
- * - r9 contains ((r0 + 63) & -64)
+ * - r9 contains ((r0 + 63) & -64)
* [start of next dst cache line.]
*/
@@ -208,137 +210,137 @@ EX: { lw r28, r9; addi r9, r9, 64 }
/* Copy line 0, first stalling until r5 is ready. */
EX: { move r12, r5; lw r16, r1 }
{ bz r4, .Lcopy_8_check; slti_u r8, r2, 8 }
- /* Prefetch several lines ahead. */
+ /* Prefetch several lines ahead. */
EX: { lw r5, r3; addi r3, r3, 64 }
- { jal .Lcopy_line }
+ { jal .Lcopy_line }
/* Copy line 1, first stalling until r6 is ready. */
EX: { move r12, r6; lw r16, r1 }
{ bz r4, .Lcopy_8_check; slti_u r8, r2, 8 }
- /* Prefetch several lines ahead. */
+ /* Prefetch several lines ahead. */
EX: { lw r6, r3; addi r3, r3, 64 }
{ jal .Lcopy_line }
/* Copy line 2, first stalling until r7 is ready. */
EX: { move r12, r7; lw r16, r1 }
{ bz r4, .Lcopy_8_check; slti_u r8, r2, 8 }
- /* Prefetch several lines ahead. */
+ /* Prefetch several lines ahead. */
EX: { lw r7, r3; addi r3, r3, 64 }
- /* Use up a caches-busy cycle by jumping back to the top of the
- * loop. Might as well get it out of the way now.
- */
- { j .Lbig_loop }
+ /* Use up a caches-busy cycle by jumping back to the top of the
+ * loop. Might as well get it out of the way now.
+ */
+ { j .Lbig_loop }
/* On entry:
* - r0 points to the destination line.
* - r1 points to the source line.
- * - r3 is the next prefetch address.
+ * - r3 is the next prefetch address.
* - r9 holds the last address used for wh64.
* - r12 = WORD_15
- * - r16 = WORD_0.
- * - r17 == r1 + 16.
- * - r27 holds saved lr to restore.
+ * - r16 = WORD_0.
+ * - r17 == r1 + 16.
+ * - r27 holds saved lr to restore.
*
* On exit:
* - r0 is incremented by 64.
* - r1 is incremented by 64, unless that would point to a word
- * beyond the end of the source array, in which case it is redirected
- * to point to an arbitrary word already in the cache.
+ * beyond the end of the source array, in which case it is redirected
+ * to point to an arbitrary word already in the cache.
* - r2 is decremented by 64.
- * - r3 is unchanged, unless it points to a word beyond the
- * end of the source array, in which case it is redirected
- * to point to an arbitrary word already in the cache.
- * Redirecting is OK since if we are that close to the end
- * of the array we will not come back to this subroutine
- * and use the contents of the prefetched address.
+ * - r3 is unchanged, unless it points to a word beyond the
+ * end of the source array, in which case it is redirected
+ * to point to an arbitrary word already in the cache.
+ * Redirecting is OK since if we are that close to the end
+ * of the array we will not come back to this subroutine
+ * and use the contents of the prefetched address.
* - r4 is nonzero iff r2 >= 64.
- * - r9 is incremented by 64, unless it points beyond the
- * end of the last full destination cache line, in which
- * case it is redirected to a "safe address" that can be
- * clobbered (sp - 64)
+ * - r9 is incremented by 64, unless it points beyond the
+ * end of the last full destination cache line, in which
+ * case it is redirected to a "safe address" that can be
+ * clobbered (sp - 64)
* - lr contains the value in r27.
*/
/* r26 unused */
.Lcopy_line:
- /* TODO: when r3 goes past the end, we would like to redirect it
- * to prefetch the last partial cache line (if any) just once, for the
- * benefit of the final cleanup loop. But we don't want to
- * prefetch that line more than once, or subsequent prefetches
- * will go into the RTF. But then .Lbig_loop should unconditionally
- * branch to top of loop to execute final prefetch, and its
- * nop should become a conditional branch.
- */
-
- /* We need two non-memory cycles here to cover the resources
- * used by the loads initiated by the caller.
- */
- { add r15, r1, r2 }
+ /* TODO: when r3 goes past the end, we would like to redirect it
+ * to prefetch the last partial cache line (if any) just once, for the
+ * benefit of the final cleanup loop. But we don't want to
+ * prefetch that line more than once, or subsequent prefetches
+ * will go into the RTF. But then .Lbig_loop should unconditionally
+ * branch to top of loop to execute final prefetch, and its
+ * nop should become a conditional branch.
+ */
+
+ /* We need two non-memory cycles here to cover the resources
+ * used by the loads initiated by the caller.
+ */
+ { add r15, r1, r2 }
.Lcopy_line2:
- { slt_u r13, r3, r15; addi r17, r1, 16 }
+ { slt_u r13, r3, r15; addi r17, r1, 16 }
- /* NOTE: this will stall for one cycle as L1 is busy. */
+ /* NOTE: this will stall for one cycle as L1 is busy. */
- /* Fill second L1D line. */
+ /* Fill second L1D line. */
EX: { lw r17, r17; addi r1, r1, 48; mvz r3, r13, r1 } /* r17 = WORD_4 */
#if CHIP_HAS_WH64()
- /* Prepare destination line for writing. */
+ /* Prepare destination line for writing. */
EX: { wh64 r9; addi r9, r9, 64 }
#else
- /* Prefetch dest line */
+ /* Prefetch dest line */
{ prefetch r9; addi r9, r9, 64 }
#endif
- /* Load seven words that are L1D hits to cover wh64 L2 usage. */
+ /* Load seven words that are L1D hits to cover wh64 L2 usage. */
- /* Load the three remaining words from the last L1D line, which
- * we know has already filled the L1D.
- */
+ /* Load the three remaining words from the last L1D line, which
+ * we know has already filled the L1D.
+ */
EX: { lw r4, r1; addi r1, r1, 4; addi r20, r1, 16 } /* r4 = WORD_12 */
EX: { lw r8, r1; addi r1, r1, 4; slt_u r13, r20, r15 }/* r8 = WORD_13 */
EX: { lw r11, r1; addi r1, r1, -52; mvz r20, r13, r1 } /* r11 = WORD_14 */
- /* Load the three remaining words from the first L1D line, first
- * stalling until it has filled by "looking at" r16.
- */
+ /* Load the three remaining words from the first L1D line, first
+ * stalling until it has filled by "looking at" r16.
+ */
EX: { lw r13, r1; addi r1, r1, 4; move zero, r16 } /* r13 = WORD_1 */
EX: { lw r14, r1; addi r1, r1, 4 } /* r14 = WORD_2 */
EX: { lw r15, r1; addi r1, r1, 8; addi r10, r0, 60 } /* r15 = WORD_3 */
- /* Load second word from the second L1D line, first
- * stalling until it has filled by "looking at" r17.
- */
+ /* Load second word from the second L1D line, first
+ * stalling until it has filled by "looking at" r17.
+ */
EX: { lw r19, r1; addi r1, r1, 4; move zero, r17 } /* r19 = WORD_5 */
- /* Store last word to the destination line, potentially dirtying it
- * for the first time, which keeps the L2 busy for two cycles.
- */
+ /* Store last word to the destination line, potentially dirtying it
+ * for the first time, which keeps the L2 busy for two cycles.
+ */
EX: { sw r10, r12 } /* store(WORD_15) */
- /* Use two L1D hits to cover the sw L2 access above. */
+ /* Use two L1D hits to cover the sw L2 access above. */
EX: { lw r10, r1; addi r1, r1, 4 } /* r10 = WORD_6 */
EX: { lw r12, r1; addi r1, r1, 4 } /* r12 = WORD_7 */
- /* Fill third L1D line. */
+ /* Fill third L1D line. */
EX: { lw r18, r1; addi r1, r1, 4 } /* r18 = WORD_8 */
- /* Store first L1D line. */
+ /* Store first L1D line. */
EX: { sw r0, r16; addi r0, r0, 4; add r16, r0, r2 } /* store(WORD_0) */
EX: { sw r0, r13; addi r0, r0, 4; andi r16, r16, -64 } /* store(WORD_1) */
EX: { sw r0, r14; addi r0, r0, 4; slt_u r16, r9, r16 } /* store(WORD_2) */
#if CHIP_HAS_WH64()
EX: { sw r0, r15; addi r0, r0, 4; addi r13, sp, -64 } /* store(WORD_3) */
#else
- /* Back up the r9 to a cache line we are already storing to
+ /* Back up the r9 to a cache line we are already storing to
* if it gets past the end of the dest vector. Strictly speaking,
* we don't need to back up to the start of a cache line, but it's free
* and tidy, so why not?
- */
+ */
EX: { sw r0, r15; addi r0, r0, 4; andi r13, r0, -64 } /* store(WORD_3) */
#endif
- /* Store second L1D line. */
+ /* Store second L1D line. */
EX: { sw r0, r17; addi r0, r0, 4; mvz r9, r16, r13 }/* store(WORD_4) */
EX: { sw r0, r19; addi r0, r0, 4 } /* store(WORD_5) */
EX: { sw r0, r10; addi r0, r0, 4 } /* store(WORD_6) */
@@ -348,30 +350,30 @@ EX: { lw r13, r1; addi r1, r1, 4; move zero, r18 } /* r13 = WORD_9 */
EX: { lw r14, r1; addi r1, r1, 4 } /* r14 = WORD_10 */
EX: { lw r15, r1; move r1, r20 } /* r15 = WORD_11 */
- /* Store third L1D line. */
+ /* Store third L1D line. */
EX: { sw r0, r18; addi r0, r0, 4 } /* store(WORD_8) */
EX: { sw r0, r13; addi r0, r0, 4 } /* store(WORD_9) */
EX: { sw r0, r14; addi r0, r0, 4 } /* store(WORD_10) */
EX: { sw r0, r15; addi r0, r0, 4 } /* store(WORD_11) */
- /* Store rest of fourth L1D line. */
+ /* Store rest of fourth L1D line. */
EX: { sw r0, r4; addi r0, r0, 4 } /* store(WORD_12) */
- {
+ {
EX: sw r0, r8 /* store(WORD_13) */
- addi r0, r0, 4
+ addi r0, r0, 4
/* Will r2 be > 64 after we subtract 64 below? */
- shri r4, r2, 7
- }
- {
+ shri r4, r2, 7
+ }
+ {
EX: sw r0, r11 /* store(WORD_14) */
- addi r0, r0, 8
- /* Record 64 bytes successfully copied. */
- addi r2, r2, -64
- }
+ addi r0, r0, 8
+ /* Record 64 bytes successfully copied. */
+ addi r2, r2, -64
+ }
{ jrp lr; move lr, r27 }
- /* Convey to the backtrace library that the stack frame is size
+ /* Convey to the backtrace library that the stack frame is size
* zero, and the real return address is on the stack rather than
* in 'lr'.
*/
diff --git a/arch/tile/lib/memmove_32.c b/arch/tile/lib/memmove.c
index fd615ae6ade7..fd615ae6ade7 100644
--- a/arch/tile/lib/memmove_32.c
+++ b/arch/tile/lib/memmove.c
diff --git a/arch/tile/lib/memset_32.c b/arch/tile/lib/memset_32.c
index d014c1fbcbc2..57dbb3a5bff8 100644
--- a/arch/tile/lib/memset_32.c
+++ b/arch/tile/lib/memset_32.c
@@ -18,6 +18,7 @@
#include <linux/string.h>
#include <linux/module.h>
+#undef memset
void *memset(void *s, int c, size_t n)
{
diff --git a/arch/tile/lib/strlen_32.c b/arch/tile/lib/strlen_32.c
index f26f88e11e4a..4974292a5534 100644
--- a/arch/tile/lib/strlen_32.c
+++ b/arch/tile/lib/strlen_32.c
@@ -16,6 +16,8 @@
#include <linux/string.h>
#include <linux/module.h>
+#undef strlen
+
size_t strlen(const char *s)
{
/* Get an aligned pointer. */
diff --git a/arch/tile/mm/fault.c b/arch/tile/mm/fault.c
index 704f3e8a4385..f295b4ac941d 100644
--- a/arch/tile/mm/fault.c
+++ b/arch/tile/mm/fault.c
@@ -66,10 +66,10 @@ static noinline void force_sig_info_fault(int si_signo, int si_code,
#ifndef __tilegx__
/*
* Synthesize the fault a PL0 process would get by doing a word-load of
- * an unaligned address or a high kernel address. Called indirectly
- * from sys_cmpxchg() in kernel/intvec.S.
+ * an unaligned address or a high kernel address.
*/
-int _sys_cmpxchg_badaddr(unsigned long address, struct pt_regs *regs)
+SYSCALL_DEFINE2(cmpxchg_badaddr, unsigned long, address,
+ struct pt_regs *, regs)
{
if (address >= PAGE_OFFSET)
force_sig_info_fault(SIGSEGV, SEGV_MAPERR, address,
@@ -563,10 +563,10 @@ do_sigbus:
/*
* When we take an ITLB or DTLB fault or access violation in the
* supervisor while the critical section bit is set, the hypervisor is
- * reluctant to write new values into the EX_CONTEXT_1_x registers,
+ * reluctant to write new values into the EX_CONTEXT_K_x registers,
* since that might indicate we have not yet squirreled the SPR
* contents away and can thus safely take a recursive interrupt.
- * Accordingly, the hypervisor passes us the PC via SYSTEM_SAVE_1_2.
+ * Accordingly, the hypervisor passes us the PC via SYSTEM_SAVE_K_2.
*
* Note that this routine is called before homecache_tlb_defer_enter(),
* which means that we can properly unlock any atomics that might
@@ -610,7 +610,7 @@ struct intvec_state do_page_fault_ics(struct pt_regs *regs, int fault_num,
* fault. We didn't set up a kernel stack on initial entry to
* sys_cmpxchg, but instead had one set up by the fault, which
* (because sys_cmpxchg never releases ICS) came to us via the
- * SYSTEM_SAVE_1_2 mechanism, and thus EX_CONTEXT_1_[01] are
+ * SYSTEM_SAVE_K_2 mechanism, and thus EX_CONTEXT_K_[01] are
* still referencing the original user code. We release the
* atomic lock and rewrite pt_regs so that it appears that we
* came from user-space directly, and after we finish the
diff --git a/arch/tile/mm/homecache.c b/arch/tile/mm/homecache.c
index fb3b4a55cec4..d78df3a6ee15 100644
--- a/arch/tile/mm/homecache.c
+++ b/arch/tile/mm/homecache.c
@@ -37,6 +37,8 @@
#include <asm/pgalloc.h>
#include <asm/homecache.h>
+#include <arch/sim.h>
+
#include "migrate.h"
@@ -217,13 +219,6 @@ static unsigned long cache_flush_length(unsigned long length)
return (length >= CHIP_L2_CACHE_SIZE()) ? HV_FLUSH_EVICT_L2 : length;
}
-/* On the simulator, confirm lines have been evicted everywhere. */
-static void validate_lines_evicted(unsigned long pfn, size_t length)
-{
- sim_syscall(SIM_SYSCALL_VALIDATE_LINES_EVICTED,
- (HV_PhysAddr)pfn << PAGE_SHIFT, length);
-}
-
/* Flush a page out of whatever cache(s) it is in. */
void homecache_flush_cache(struct page *page, int order)
{
@@ -234,7 +229,7 @@ void homecache_flush_cache(struct page *page, int order)
homecache_mask(page, pages, &home_mask);
flush_remote(pfn, length, &home_mask, 0, 0, 0, NULL, NULL, 0);
- validate_lines_evicted(pfn, pages * PAGE_SIZE);
+ sim_validate_lines_evicted(PFN_PHYS(pfn), pages * PAGE_SIZE);
}
diff --git a/arch/tile/mm/init.c b/arch/tile/mm/init.c
index d89c9eacd162..78e1982cb6c9 100644
--- a/arch/tile/mm/init.c
+++ b/arch/tile/mm/init.c
@@ -1060,7 +1060,7 @@ void free_initmem(void)
/*
* Free the pages mapped from 0xc0000000 that correspond to code
- * pages from 0xfd000000 that we won't use again after init.
+ * pages from MEM_SV_INTRPT that we won't use again after init.
*/
free_init_pages("unused kernel text",
(unsigned long)_sinittext - text_delta,
diff --git a/drivers/char/hvc_tile.c b/drivers/char/hvc_tile.c
index c4efb55cbc03..7a84a0595477 100644
--- a/drivers/char/hvc_tile.c
+++ b/drivers/char/hvc_tile.c
@@ -61,7 +61,8 @@ console_initcall(hvc_tile_console_init);
static int __init hvc_tile_init(void)
{
- hvc_alloc(0, 0, &hvc_tile_get_put_ops, 128);
- return 0;
+ struct hvc_struct *s;
+ s = hvc_alloc(0, 0, &hvc_tile_get_put_ops, 128);
+ return IS_ERR(s) ? PTR_ERR(s) : 0;
}
device_initcall(hvc_tile_init);
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 95bda87a3e84..995840664a5f 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -374,7 +374,7 @@ config SLUB_STATS
config DEBUG_KMEMLEAK
bool "Kernel memory leak detector"
depends on DEBUG_KERNEL && EXPERIMENTAL && !MEMORY_HOTPLUG && \
- (X86 || ARM || PPC || S390 || SPARC64 || SUPERH || MICROBLAZE)
+ (X86 || ARM || PPC || S390 || SPARC64 || SUPERH || MICROBLAZE || TILE)
select DEBUG_FS if SYSFS
select STACKTRACE if STACKTRACE_SUPPORT