summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-06-06 12:08:39 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2014-06-06 12:08:39 -0700
commit1fe9eb184721132c7254d76d9ef31c96edad8870 (patch)
treec055ffb7f201bc2370714ebe186a922d0eb39d0d
parent0bb464624140bfdd8389d4c5464ba134b2856049 (diff)
parent89abd4df28c6f85645e32f37ffab6426f800e4a1 (diff)
Merge tag 'mfd-for-linus-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next
Pull MFD updates from Lee Jones: "Changes to existing drivers: - increase DT coverage: arizona, mc13xxx, stmpe-i2c, syscon, sun6i-prcm - regmap use of and/or clean-up: tps65090, twl6040 - basic renaming: max14577 - use new cpufreq helpers: db8500-prcmu - increase regulator support: stmpe, arizona, wm5102 - reduce legacy GPIO overhead: stmpe - provide necessary remove path: bcm590xx - expand sysfs presence: kempld - move driver specific code out to drivers: rtc-s5m, arizona - clk handling: twl6040 - use managed (devm_*) resources: ipaq-micro - clean-up/remove unused/duplicated code: tps65218, sec, pm8921, abx500-core, db8500-prcmu, menelaus - build/boot/sematic bug fixes: rtsx_usb, stmpe, bcm590xx, abx500, mc13xxx, rdc321x-southbridge, mfd-core, sec, max14577, syscon, cros_ec_spi - constify stuff: sm501, tps65910, tps6507x, tps6586x, max77686, max8997, kempld, max77693, max8907, rtsx_usb, db8500-prcmu, max8998, wm8400, sec, lp3943, max14577, as3711, omap-usb-host, ipaq-micro Support for new devices: - add support for max77836 into max14577 - add support for tps658640 into tps6586x - add support for cros-ec-i2c-tunnel into cros_ec - add new driver for rtsx_usb_sdmmc and rtsx_usb_ms - add new driver for axp20x - add new driver for sun6i-prcm - add new driver for ipaq-micro" * tag 'mfd-for-linus-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (77 commits) mfd: wm5102: Correct default for LDO Control 2 register mfd: menelaus: Use module_i2c_driver mfd: tps65218: Terminate of match table mfd: db8500-prcmu: Remove check for CONFIG_DBX500_PRCMU_DEBUG mfd: ti-keystone-devctrl: Add bindings for device state control mfd: palmas: Format the header file mfd: abx500-core: Remove unused function abx500_dump_all_banks() mfd: arizona: Correct addresses of always-on trigger registers mfd: max14577: Cast to architecture agnostic data type i2c: ChromeOS EC tunnel driver mfd: cros_ec: Sync to the latest cros_ec_commands.h from EC sources mfd: cros_ec: spi: Increase cros_ec_spi deadline from 5ms to 100ms mfd: cros_ec: spi: Make the cros_ec_spi timeout more reliable mfd: cros_ec: spi: Add mutex to cros_ec_spi mfd: cros_ec: spi: Calculate delay between transfers correctly mfd: arizona: Correct error message for addition of main IRQ chip mfd: wm8997: Add registers for high power mode mfd: arizona: Add MICVDD to mapped regulators mfd: ipaq-micro: Make mfd_cell array const mfd: ipaq-micro: Use devm_ioremap_resource() ...
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt39
-rw-r--r--Documentation/devicetree/bindings/mfd/sun6i-prcm.txt59
-rw-r--r--Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt19
-rw-r--r--Documentation/devicetree/bindings/mfd/twl6040.txt2
-rw-r--r--drivers/gpio/gpio-stmpe.c18
-rw-r--r--drivers/i2c/busses/Kconfig9
-rw-r--r--drivers/i2c/busses/Makefile1
-rw-r--r--drivers/i2c/busses/i2c-cros-ec-tunnel.c318
-rw-r--r--drivers/memstick/host/Kconfig10
-rw-r--r--drivers/memstick/host/Makefile1
-rw-r--r--drivers/memstick/host/rtsx_usb_ms.c839
-rw-r--r--drivers/mfd/Kconfig31
-rw-r--r--drivers/mfd/Makefile3
-rw-r--r--drivers/mfd/abx500-core.c16
-rw-r--r--drivers/mfd/arizona-core.c1
-rw-r--r--drivers/mfd/arizona-irq.c2
-rw-r--r--drivers/mfd/as3711.c2
-rw-r--r--drivers/mfd/axp20x.c258
-rw-r--r--drivers/mfd/bcm590xx.c9
-rw-r--r--drivers/mfd/cros_ec.c10
-rw-r--r--drivers/mfd/cros_ec_spi.c67
-rw-r--r--drivers/mfd/db8500-prcmu.c5
-rw-r--r--drivers/mfd/ipaq-micro.c482
-rw-r--r--drivers/mfd/kempld-core.c129
-rw-r--r--drivers/mfd/lp3943.c2
-rw-r--r--drivers/mfd/lpc_ich.c1
-rw-r--r--drivers/mfd/max14577.c40
-rw-r--r--drivers/mfd/max77686.c2
-rw-r--r--drivers/mfd/max77693.c2
-rw-r--r--drivers/mfd/max8907.c2
-rw-r--r--drivers/mfd/max8997.c2
-rw-r--r--drivers/mfd/max8998.c2
-rw-r--r--drivers/mfd/mc13xxx-core.c26
-rw-r--r--drivers/mfd/menelaus.c23
-rw-r--r--drivers/mfd/mfd-core.c11
-rw-r--r--drivers/mfd/omap-usb-host.c2
-rw-r--r--drivers/mfd/pm8921-core.c123
-rw-r--r--drivers/mfd/rdc321x-southbridge.c2
-rw-r--r--drivers/mfd/rtsx_usb.c16
-rw-r--r--drivers/mfd/sec-core.c88
-rw-r--r--drivers/mfd/sec-irq.c2
-rw-r--r--drivers/mfd/sm501.c2
-rw-r--r--drivers/mfd/stmpe-i2c.c30
-rw-r--r--drivers/mfd/stmpe.c33
-rw-r--r--drivers/mfd/stmpe.h2
-rw-r--r--drivers/mfd/sun6i-prcm.c134
-rw-r--r--drivers/mfd/syscon.c6
-rw-r--r--drivers/mfd/tps6507x.c2
-rw-r--r--drivers/mfd/tps65218.c1
-rw-r--r--drivers/mfd/tps6586x.c2
-rw-r--r--drivers/mfd/tps65910.c2
-rw-r--r--drivers/mfd/twl6040.c42
-rw-r--r--drivers/mfd/wm5102-tables.c4
-rw-r--r--drivers/mfd/wm5110-tables.c14
-rw-r--r--drivers/mfd/wm8400-core.c2
-rw-r--r--drivers/mfd/wm8997-tables.c14
-rw-r--r--drivers/mmc/host/Kconfig7
-rw-r--r--drivers/mmc/host/Makefile1
-rw-r--r--drivers/mmc/host/rtsx_usb_sdmmc.c1455
-rw-r--r--drivers/rtc/rtc-s5m.c75
-rw-r--r--include/linux/mfd/abx500.h1
-rw-r--r--include/linux/mfd/arizona/registers.h14
-rw-r--r--include/linux/mfd/axp20x.h180
-rw-r--r--include/linux/mfd/cros_ec.h4
-rw-r--r--include/linux/mfd/cros_ec_commands.h1128
-rw-r--r--include/linux/mfd/ipaq-micro.h148
-rw-r--r--include/linux/mfd/kempld.h4
-rw-r--r--include/linux/mfd/mc13xxx.h22
-rw-r--r--include/linux/mfd/palmas.h2166
-rw-r--r--include/linux/mfd/pm8xxx/core.h81
-rw-r--r--include/linux/mfd/rdc321x.h2
-rw-r--r--include/linux/mfd/samsung/core.h35
-rw-r--r--include/linux/mfd/stmpe.h19
-rw-r--r--include/linux/mfd/syscon.h2
-rw-r--r--include/linux/mfd/tps65218.h1
-rw-r--r--include/linux/mfd/twl6040.h3
76 files changed, 6641 insertions, 1673 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt b/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt
new file mode 100644
index 000000000000..898f030eba62
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt
@@ -0,0 +1,39 @@
+I2C bus that tunnels through the ChromeOS EC (cros-ec)
+======================================================
+On some ChromeOS board designs we've got a connection to the EC (embedded
+controller) but no direct connection to some devices on the other side of
+the EC (like a battery and PMIC). To get access to those devices we need
+to tunnel our i2c commands through the EC.
+
+The node for this device should be under a cros-ec node like google,cros-ec-spi
+or google,cros-ec-i2c.
+
+
+Required properties:
+- compatible: google,cros-ec-i2c-tunnel
+- google,remote-bus: The EC bus we'd like to talk to.
+
+Optional child nodes:
+- One node per I2C device connected to the tunnelled I2C bus.
+
+
+Example:
+ cros-ec@0 {
+ compatible = "google,cros-ec-spi";
+
+ ...
+
+ i2c-tunnel {
+ compatible = "google,cros-ec-i2c-tunnel";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ google,remote-bus = <0>;
+
+ battery: sbs-battery@b {
+ compatible = "sbs,sbs-battery";
+ reg = <0xb>;
+ sbs,poll-retry-count = <1>;
+ };
+ };
+ }
diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
new file mode 100644
index 000000000000..1f5a31fef907
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
@@ -0,0 +1,59 @@
+* Allwinner PRCM (Power/Reset/Clock Management) Multi-Functional Device
+
+PRCM is an MFD device exposing several Power Management related devices
+(like clks and reset controllers).
+
+Required properties:
+ - compatible: "allwinner,sun6i-a31-prcm"
+ - reg: The PRCM registers range
+
+The prcm node may contain several subdevices definitions:
+ - see Documentation/devicetree/clk/sunxi.txt for clock devices
+ - see Documentation/devicetree/reset/allwinner,sunxi-clock-reset.txt for reset
+ controller devices
+
+
+Example:
+
+ prcm: prcm@01f01400 {
+ compatible = "allwinner,sun6i-a31-prcm";
+ reg = <0x01f01400 0x200>;
+
+ /* Put subdevices here */
+ ar100: ar100_clk {
+ compatible = "allwinner,sun6i-a31-ar100-clk";
+ #clock-cells = <0>;
+ clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
+ };
+
+ ahb0: ahb0_clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&ar100_div>;
+ clock-output-names = "ahb0";
+ };
+
+ apb0: apb0_clk {
+ compatible = "allwinner,sun6i-a31-apb0-clk";
+ #clock-cells = <0>;
+ clocks = <&ahb0>;
+ clock-output-names = "apb0";
+ };
+
+ apb0_gates: apb0_gates_clk {
+ compatible = "allwinner,sun6i-a31-apb0-gates-clk";
+ #clock-cells = <1>;
+ clocks = <&apb0>;
+ clock-output-names = "apb0_pio", "apb0_ir",
+ "apb0_timer01", "apb0_p2wi",
+ "apb0_uart", "apb0_1wire",
+ "apb0_i2c";
+ };
+
+ apb0_rst: apb0_rst {
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ #reset-cells = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt
new file mode 100644
index 000000000000..20963c76b4bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt
@@ -0,0 +1,19 @@
+* Device tree bindings for Texas Instruments keystone device state control
+
+The Keystone II devices have a set of registers that are used to control
+the status of its peripherals. This node is intended to allow access to
+this functionality.
+
+Required properties:
+
+- compatible: "ti,keystone-devctrl", "syscon"
+
+- reg: contains offset/length value for device state control
+ registers space.
+
+Example:
+
+devctrl: device-state-control@0x02620000 {
+ compatible = "ti,keystone-devctrl", "syscon";
+ reg = <0x02620000 0x1000>;
+};
diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt
index 0f5dd709d752..a41157b5d930 100644
--- a/Documentation/devicetree/bindings/mfd/twl6040.txt
+++ b/Documentation/devicetree/bindings/mfd/twl6040.txt
@@ -19,6 +19,8 @@ Required properties:
Optional properties, nodes:
- enable-active-high: To power on the twl6040 during boot.
+- clocks: phandle to the clk32k clock provider
+- clock-names: Must be "clk32k"
Vibra functionality
Required properties:
diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c
index 2776a09bee58..628b58494294 100644
--- a/drivers/gpio/gpio-stmpe.c
+++ b/drivers/gpio/gpio-stmpe.c
@@ -23,7 +23,8 @@
enum { REG_RE, REG_FE, REG_IE };
#define CACHE_NR_REGS 3
-#define CACHE_NR_BANKS (STMPE_NR_GPIOS / 8)
+/* No variant has more than 24 GPIOs */
+#define CACHE_NR_BANKS (24 / 8)
struct stmpe_gpio {
struct gpio_chip chip;
@@ -31,8 +32,6 @@ struct stmpe_gpio {
struct device *dev;
struct mutex irq_lock;
struct irq_domain *domain;
-
- int irq_base;
unsigned norequest_mask;
/* Caches of interrupt control registers for bus_lock */
@@ -311,13 +310,8 @@ static const struct irq_domain_ops stmpe_gpio_irq_simple_ops = {
static int stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio,
struct device_node *np)
{
- int base = 0;
-
- if (!np)
- base = stmpe_gpio->irq_base;
-
stmpe_gpio->domain = irq_domain_add_simple(np,
- stmpe_gpio->chip.ngpio, base,
+ stmpe_gpio->chip.ngpio, 0,
&stmpe_gpio_irq_simple_ops, stmpe_gpio);
if (!stmpe_gpio->domain) {
dev_err(stmpe_gpio->dev, "failed to create irqdomain\n");
@@ -354,7 +348,7 @@ static int stmpe_gpio_probe(struct platform_device *pdev)
#ifdef CONFIG_OF
stmpe_gpio->chip.of_node = np;
#endif
- stmpe_gpio->chip.base = pdata ? pdata->gpio_base : -1;
+ stmpe_gpio->chip.base = -1;
if (pdata)
stmpe_gpio->norequest_mask = pdata->norequest_mask;
@@ -362,9 +356,7 @@ static int stmpe_gpio_probe(struct platform_device *pdev)
of_property_read_u32(np, "st,norequest-mask",
&stmpe_gpio->norequest_mask);
- if (irq >= 0)
- stmpe_gpio->irq_base = stmpe->irq_base + STMPE_INT_GPIO(0);
- else
+ if (irq < 0)
dev_info(&pdev->dev,
"device configured in no-irq mode; "
"irqs are not available\n");
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index c94db1c5e353..9a0a6cc7f4ba 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -993,6 +993,15 @@ config I2C_SIBYTE
help
Supports the SiByte SOC on-chip I2C interfaces (2 channels).
+config I2C_CROS_EC_TUNNEL
+ tristate "ChromeOS EC tunnel I2C bus"
+ depends on MFD_CROS_EC
+ help
+ If you say yes here you get an I2C bus that will tunnel i2c commands
+ through to the other side of the ChromeOS EC to the i2c bus
+ connected there. This will work whatever the interface used to
+ talk to the EC (SPI, I2C or LPC).
+
config SCx200_I2C
tristate "NatSemi SCx200 I2C using GPIO pins (DEPRECATED)"
depends on SCx200_GPIO
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 18d18ff9db93..e110ca932918 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -95,6 +95,7 @@ obj-$(CONFIG_I2C_VIPERBOARD) += i2c-viperboard.o
# Other I2C/SMBus bus drivers
obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
obj-$(CONFIG_I2C_BCM_KONA) += i2c-bcm-kona.o
+obj-$(CONFIG_I2C_CROS_EC_TUNNEL) += i2c-cros-ec-tunnel.o
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
new file mode 100644
index 000000000000..8e7a71487bb1
--- /dev/null
+++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
@@ -0,0 +1,318 @@
+/*
+ * Copyright (C) 2013 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Expose an I2C passthrough to the ChromeOS EC.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/**
+ * struct ec_i2c_device - Driver data for I2C tunnel
+ *
+ * @dev: Device node
+ * @adap: I2C adapter
+ * @ec: Pointer to EC device
+ * @remote_bus: The EC bus number we tunnel to on the other side.
+ * @request_buf: Buffer for transmitting data; we expect most transfers to fit.
+ * @response_buf: Buffer for receiving data; we expect most transfers to fit.
+ */
+
+struct ec_i2c_device {
+ struct device *dev;
+ struct i2c_adapter adap;
+ struct cros_ec_device *ec;
+
+ u16 remote_bus;
+
+ u8 request_buf[256];
+ u8 response_buf[256];
+};
+
+/**
+ * ec_i2c_count_message - Count bytes needed for ec_i2c_construct_message
+ *
+ * @i2c_msgs: The i2c messages to read
+ * @num: The number of i2c messages.
+ *
+ * Returns the number of bytes the messages will take up.
+ */
+static int ec_i2c_count_message(const struct i2c_msg i2c_msgs[], int num)
+{
+ int i;
+ int size;
+
+ size = sizeof(struct ec_params_i2c_passthru);
+ size += num * sizeof(struct ec_params_i2c_passthru_msg);
+ for (i = 0; i < num; i++)
+ if (!(i2c_msgs[i].flags & I2C_M_RD))
+ size += i2c_msgs[i].len;
+
+ return size;
+}
+
+/**
+ * ec_i2c_construct_message - construct a message to go to the EC
+ *
+ * This function effectively stuffs the standard i2c_msg format of Linux into
+ * a format that the EC understands.
+ *
+ * @buf: The buffer to fill. We assume that the buffer is big enough.
+ * @i2c_msgs: The i2c messages to read.
+ * @num: The number of i2c messages.
+ * @bus_num: The remote bus number we want to talk to.
+ *
+ * Returns 0 or a negative error number.
+ */
+static int ec_i2c_construct_message(u8 *buf, const struct i2c_msg i2c_msgs[],
+ int num, u16 bus_num)
+{
+ struct ec_params_i2c_passthru *params;
+ u8 *out_data;
+ int i;
+
+ out_data = buf + sizeof(struct ec_params_i2c_passthru) +
+ num * sizeof(struct ec_params_i2c_passthru_msg);
+
+ params = (struct ec_params_i2c_passthru *)buf;
+ params->port = bus_num;
+ params->num_msgs = num;
+ for (i = 0; i < num; i++) {
+ const struct i2c_msg *i2c_msg = &i2c_msgs[i];
+ struct ec_params_i2c_passthru_msg *msg = &params->msg[i];
+
+ msg->len = i2c_msg->len;
+ msg->addr_flags = i2c_msg->addr;
+
+ if (i2c_msg->flags & I2C_M_TEN)
+ msg->addr_flags |= EC_I2C_FLAG_10BIT;
+
+ if (i2c_msg->flags & I2C_M_RD) {
+ msg->addr_flags |= EC_I2C_FLAG_READ;
+ } else {
+ memcpy(out_data, i2c_msg->buf, msg->len);
+ out_data += msg->len;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * ec_i2c_count_response - Count bytes needed for ec_i2c_parse_response
+ *
+ * @i2c_msgs: The i2c messages to to fill up.
+ * @num: The number of i2c messages expected.
+ *
+ * Returns the number of response bytes expeced.
+ */
+static int ec_i2c_count_response(struct i2c_msg i2c_msgs[], int num)
+{
+ int size;
+ int i;
+
+ size = sizeof(struct ec_response_i2c_passthru);
+ for (i = 0; i < num; i++)
+ if (i2c_msgs[i].flags & I2C_M_RD)
+ size += i2c_msgs[i].len;
+
+ return size;
+}
+
+/**
+ * ec_i2c_parse_response - Parse a response from the EC
+ *
+ * We'll take the EC's response and copy it back into msgs.
+ *
+ * @buf: The buffer to parse.
+ * @i2c_msgs: The i2c messages to to fill up.
+ * @num: The number of i2c messages; will be modified to include the actual
+ * number received.
+ *
+ * Returns 0 or a negative error number.
+ */
+static int ec_i2c_parse_response(const u8 *buf, struct i2c_msg i2c_msgs[],
+ int *num)
+{
+ const struct ec_response_i2c_passthru *resp;
+ const u8 *in_data;
+ int i;
+
+ in_data = buf + sizeof(struct ec_response_i2c_passthru);
+
+ resp = (const struct ec_response_i2c_passthru *)buf;
+ if (resp->i2c_status & EC_I2C_STATUS_TIMEOUT)
+ return -ETIMEDOUT;
+ else if (resp->i2c_status & EC_I2C_STATUS_ERROR)
+ return -EREMOTEIO;
+
+ /* Other side could send us back fewer messages, but not more */
+ if (resp->num_msgs > *num)
+ return -EPROTO;
+ *num = resp->num_msgs;
+
+ for (i = 0; i < *num; i++) {
+ struct i2c_msg *i2c_msg = &i2c_msgs[i];
+
+ if (i2c_msgs[i].flags & I2C_M_RD) {
+ memcpy(i2c_msg->buf, in_data, i2c_msg->len);
+ in_data += i2c_msg->len;
+ }
+ }
+
+ return 0;
+}
+
+static int ec_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg i2c_msgs[],
+ int num)
+{
+ struct ec_i2c_device *bus = adap->algo_data;
+ struct device *dev = bus->dev;
+ const u16 bus_num = bus->remote_bus;
+ int request_len;
+ int response_len;
+ u8 *request = NULL;
+ u8 *response = NULL;
+ int result;
+
+ request_len = ec_i2c_count_message(i2c_msgs, num);
+ if (request_len < 0) {
+ dev_warn(dev, "Error constructing message %d\n", request_len);
+ result = request_len;
+ goto exit;
+ }
+ response_len = ec_i2c_count_response(i2c_msgs, num);
+ if (response_len < 0) {
+ /* Unexpected; no errors should come when NULL response */
+ dev_warn(dev, "Error preparing response %d\n", response_len);
+ result = response_len;
+ goto exit;
+ }
+
+ if (request_len <= ARRAY_SIZE(bus->request_buf)) {
+ request = bus->request_buf;
+ } else {
+ request = kzalloc(request_len, GFP_KERNEL);
+ if (request == NULL) {
+ result = -ENOMEM;
+ goto exit;
+ }
+ }
+ if (response_len <= ARRAY_SIZE(bus->response_buf)) {
+ response = bus->response_buf;
+ } else {
+ response = kzalloc(response_len, GFP_KERNEL);
+ if (response == NULL) {
+ result = -ENOMEM;
+ goto exit;
+ }
+ }
+
+ ec_i2c_construct_message(request, i2c_msgs, num, bus_num);
+ result = bus->ec->command_sendrecv(bus->ec, EC_CMD_I2C_PASSTHRU,
+ request, request_len,
+ response, response_len);
+ if (result)
+ goto exit;
+
+ result = ec_i2c_parse_response(response, i2c_msgs, &num);
+ if (result < 0)
+ goto exit;
+
+ /* Indicate success by saying how many messages were sent */
+ result = num;
+exit:
+ if (request != bus->request_buf)
+ kfree(request);
+ if (response != bus->response_buf)
+ kfree(response);
+
+ return result;
+}
+
+static u32 ec_i2c_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm ec_i2c_algorithm = {
+ .master_xfer = ec_i2c_xfer,
+ .functionality = ec_i2c_functionality,
+};
+
+static int ec_i2c_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct ec_i2c_device *bus = NULL;
+ u32 remote_bus;
+ int err;
+
+ if (!ec->command_sendrecv) {
+ dev_err(dev, "Missing sendrecv\n");
+ return -EINVAL;
+ }
+
+ bus = devm_kzalloc(dev, sizeof(*bus), GFP_KERNEL);
+ if (bus == NULL)
+ return -ENOMEM;
+
+ err = of_property_read_u32(np, "google,remote-bus", &remote_bus);
+ if (err) {
+ dev_err(dev, "Couldn't read remote-bus property\n");
+ return err;
+ }
+ bus->remote_bus = remote_bus;
+
+ bus->ec = ec;
+ bus->dev = dev;
+
+ bus->adap.owner = THIS_MODULE;
+ strlcpy(bus->adap.name, "cros-ec-i2c-tunnel", sizeof(bus->adap.name));
+ bus->adap.algo = &ec_i2c_algorithm;
+ bus->adap.algo_data = bus;
+ bus->adap.dev.parent = &pdev->dev;
+ bus->adap.dev.of_node = np;
+
+ err = i2c_add_adapter(&bus->adap);
+ if (err) {
+ dev_err(dev, "cannot register i2c adapter\n");
+ return err;
+ }
+ platform_set_drvdata(pdev, bus);
+
+ return err;
+}
+
+static int ec_i2c_remove(struct platform_device *dev)
+{
+ struct ec_i2c_device *bus = platform_get_drvdata(dev);
+
+ i2c_del_adapter(&bus->adap);
+
+ return 0;
+}
+
+static struct platform_driver ec_i2c_tunnel_driver = {
+ .probe = ec_i2c_probe,
+ .remove = ec_i2c_remove,
+ .driver = {
+ .name = "cros-ec-i2c-tunnel",
+ },
+};
+
+module_platform_driver(ec_i2c_tunnel_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("EC I2C tunnel driver");
+MODULE_ALIAS("platform:cros-ec-i2c-tunnel");
diff --git a/drivers/memstick/host/Kconfig b/drivers/memstick/host/Kconfig
index 1b37cf8cd204..7310e32b5991 100644
--- a/drivers/memstick/host/Kconfig
+++ b/drivers/memstick/host/Kconfig
@@ -52,3 +52,13 @@ config MEMSTICK_REALTEK_PCI
To compile this driver as a module, choose M here: the module will
be called rtsx_pci_ms.
+
+config MEMSTICK_REALTEK_USB
+ tristate "Realtek USB Memstick Card Interface Driver"
+ depends on MFD_RTSX_USB
+ help
+ Say Y here to include driver code to support Memstick card interface
+ of Realtek RTS5129/39 series USB card reader
+
+ To compile this driver as a module, choose M here: the module will
+ be called rts5139_ms.
diff --git a/drivers/memstick/host/Makefile b/drivers/memstick/host/Makefile
index af3459d7686e..491c9557441d 100644
--- a/drivers/memstick/host/Makefile
+++ b/drivers/memstick/host/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_MEMSTICK_TIFM_MS) += tifm_ms.o
obj-$(CONFIG_MEMSTICK_JMICRON_38X) += jmb38x_ms.o
obj-$(CONFIG_MEMSTICK_R592) += r592.o
obj-$(CONFIG_MEMSTICK_REALTEK_PCI) += rtsx_pci_ms.o
+obj-$(CONFIG_MEMSTICK_REALTEK_USB) += rtsx_usb_ms.o
diff --git a/drivers/memstick/host/rtsx_usb_ms.c b/drivers/memstick/host/rtsx_usb_ms.c
new file mode 100644
index 000000000000..a7282b7d4de8
--- /dev/null
+++ b/drivers/memstick/host/rtsx_usb_ms.c
@@ -0,0 +1,839 @@
+/* Realtek USB Memstick Card Interface driver
+ *
+ * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ * Roger Tseng <rogerable@realtek.com>
+ */
+
+#include <linux/module.h>
+#include <linux/highmem.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/memstick.h>
+#include <linux/kthread.h>
+#include <linux/mfd/rtsx_usb.h>
+#include <linux/pm_runtime.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/completion.h>
+#include <asm/unaligned.h>
+
+struct rtsx_usb_ms {
+ struct platform_device *pdev;
+ struct rtsx_ucr *ucr;
+ struct memstick_host *msh;
+ struct memstick_request *req;
+
+ struct mutex host_mutex;
+ struct work_struct handle_req;
+
+ struct task_struct *detect_ms;
+ struct completion detect_ms_exit;
+
+ u8 ssc_depth;
+ unsigned int clock;
+ int power_mode;
+ unsigned char ifmode;
+ bool eject;
+};
+
+static inline struct device *ms_dev(struct rtsx_usb_ms *host)
+{
+ return &(host->pdev->dev);
+}
+
+static inline void ms_clear_error(struct rtsx_usb_ms *host)
+{
+ struct rtsx_ucr *ucr = host->ucr;
+ rtsx_usb_ep0_write_register(ucr, CARD_STOP,
+ MS_STOP | MS_CLR_ERR,
+ MS_STOP | MS_CLR_ERR);
+
+ rtsx_usb_clear_dma_err(ucr);
+ rtsx_usb_clear_fsm_err(ucr);
+}
+
+#ifdef DEBUG
+
+static void ms_print_debug_regs(struct rtsx_usb_ms *host)
+{
+ struct rtsx_ucr *ucr = host->ucr;
+ u16 i;
+ u8 *ptr;
+
+ /* Print MS host internal registers */
+ rtsx_usb_init_cmd(ucr);
+
+ /* MS_CFG to MS_INT_REG */
+ for (i = 0xFD40; i <= 0xFD44; i++)
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, i, 0, 0);
+
+ /* CARD_SHARE_MODE to CARD_GPIO */
+ for (i = 0xFD51; i <= 0xFD56; i++)
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, i, 0, 0);
+
+ /* CARD_PULL_CTLx */
+ for (i = 0xFD60; i <= 0xFD65; i++)
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, i, 0, 0);
+
+ /* CARD_DATA_SOURCE, CARD_SELECT, CARD_CLK_EN, CARD_PWR_CTL */
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, CARD_DATA_SOURCE, 0, 0);
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, CARD_SELECT, 0, 0);
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, CARD_CLK_EN, 0, 0);
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, CARD_PWR_CTL, 0, 0);
+
+ rtsx_usb_send_cmd(ucr, MODE_CR, 100);
+ rtsx_usb_get_rsp(ucr, 21, 100);
+
+ ptr = ucr->rsp_buf;
+ for (i = 0xFD40; i <= 0xFD44; i++)
+ dev_dbg(ms_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++));
+ for (i = 0xFD51; i <= 0xFD56; i++)
+ dev_dbg(ms_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++));
+ for (i = 0xFD60; i <= 0xFD65; i++)
+ dev_dbg(ms_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++));
+
+ dev_dbg(ms_dev(host), "0x%04X: 0x%02x\n", CARD_DATA_SOURCE, *(ptr++));
+ dev_dbg(ms_dev(host), "0x%04X: 0x%02x\n", CARD_SELECT, *(ptr++));
+ dev_dbg(ms_dev(host), "0x%04X: 0x%02x\n", CARD_CLK_EN, *(ptr++));
+ dev_dbg(ms_dev(host), "0x%04X: 0x%02x\n", CARD_PWR_CTL, *(ptr++));
+}
+
+#else
+
+static void ms_print_debug_regs(struct rtsx_usb_ms *host)
+{
+}
+
+#endif
+
+static int ms_pull_ctl_disable_lqfp48(struct rtsx_ucr *ucr)
+{
+ rtsx_usb_init_cmd(ucr);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x55);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x95);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x55);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0xA5);
+
+ return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+
+static int ms_pull_ctl_disable_qfn24(struct rtsx_ucr *ucr)
+{
+ rtsx_usb_init_cmd(ucr);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x65);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x95);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x56);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0x59);
+
+ return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+
+static int ms_pull_ctl_enable_lqfp48(struct rtsx_ucr *ucr)
+{
+ rtsx_usb_init_cmd(ucr);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x55);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x95);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x55);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0xA5);
+
+ return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+
+static int ms_pull_ctl_enable_qfn24(struct rtsx_ucr *ucr)
+{
+ rtsx_usb_init_cmd(ucr);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x65);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x95);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x55);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0x59);
+
+ return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+
+static int ms_power_on(struct rtsx_usb_ms *host)
+{
+ struct rtsx_ucr *ucr = host->ucr;
+ int err;
+
+ dev_dbg(ms_dev(host), "%s\n", __func__);
+
+ rtsx_usb_init_cmd(ucr);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_SELECT, 0x07, MS_MOD_SEL);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_SHARE_MODE,
+ CARD_SHARE_MASK, CARD_SHARE_MS);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_EN,
+ MS_CLK_EN, MS_CLK_EN);
+ err = rtsx_usb_send_cmd(ucr, MODE_C, 100);
+ if (err < 0)
+ return err;
+
+ if (CHECK_PKG(ucr, LQFP48))
+ err = ms_pull_ctl_enable_lqfp48(ucr);
+ else
+ err = ms_pull_ctl_enable_qfn24(ucr);
+ if (err < 0)
+ return err;
+
+ err = rtsx_usb_write_register(ucr, CARD_PWR_CTL,
+ POWER_MASK, PARTIAL_POWER_ON);
+ if (err)
+ return err;
+
+ usleep_range(800, 1000);
+
+ rtsx_usb_init_cmd(ucr);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PWR_CTL,
+ POWER_MASK, POWER_ON);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_OE,
+ MS_OUTPUT_EN, MS_OUTPUT_EN);
+
+ return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+
+static int ms_power_off(struct rtsx_usb_ms *host)
+{
+ struct rtsx_ucr *ucr = host->ucr;
+ int err;
+
+ dev_dbg(ms_dev(host), "%s\n", __func__);
+
+ rtsx_usb_init_cmd(ucr);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_EN, MS_CLK_EN, 0);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_OE, MS_OUTPUT_EN, 0);
+
+ err = rtsx_usb_send_cmd(ucr, MODE_C, 100);
+ if (err < 0)
+ return err;
+
+ if (CHECK_PKG(ucr, LQFP48))
+ return ms_pull_ctl_disable_lqfp48(ucr);
+
+ return ms_pull_ctl_disable_qfn24(ucr);
+}
+
+static int ms_transfer_data(struct rtsx_usb_ms *host, unsigned char data_dir,
+ u8 tpc, u8 cfg, struct scatterlist *sg)
+{
+ struct rtsx_ucr *ucr = host->ucr;
+ int err;
+ unsigned int length = sg->length;
+ u16 sec_cnt = (u16)(length / 512);
+ u8 trans_mode, dma_dir, flag;
+ unsigned int pipe;
+ struct memstick_dev *card = host->msh->card;
+
+ dev_dbg(ms_dev(host), "%s: tpc = 0x%02x, data_dir = %s, length = %d\n",
+ __func__, tpc, (data_dir == READ) ? "READ" : "WRITE",
+ length);
+
+ if (data_dir == READ) {
+ flag = MODE_CDIR;
+ dma_dir = DMA_DIR_FROM_CARD;
+ if (card->id.type != MEMSTICK_TYPE_PRO)
+ trans_mode = MS_TM_NORMAL_READ;
+ else
+ trans_mode = MS_TM_AUTO_READ;
+ pipe = usb_rcvbulkpipe(ucr->pusb_dev, EP_BULK_IN);
+ } else {
+ flag = MODE_CDOR;
+ dma_dir = DMA_DIR_TO_CARD;
+ if (card->id.type != MEMSTICK_TYPE_PRO)
+ trans_mode = MS_TM_NORMAL_WRITE;
+ else
+ trans_mode = MS_TM_AUTO_WRITE;
+ pipe = usb_sndbulkpipe(ucr->pusb_dev, EP_BULK_OUT);
+ }
+
+ rtsx_usb_init_cmd(ucr);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TPC, 0xFF, tpc);
+ if (card->id.type == MEMSTICK_TYPE_PRO) {
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_SECTOR_CNT_H,
+ 0xFF, (u8)(sec_cnt >> 8));
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_SECTOR_CNT_L,
+ 0xFF, (u8)sec_cnt);
+ }
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF, cfg);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC3,
+ 0xFF, (u8)(length >> 24));
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC2,
+ 0xFF, (u8)(length >> 16));
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC1,
+ 0xFF, (u8)(length >> 8));
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC0, 0xFF,
+ (u8)length);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_CTL,
+ 0x03 | DMA_PACK_SIZE_MASK, dma_dir | DMA_EN | DMA_512);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_DATA_SOURCE,
+ 0x01, RING_BUFFER);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TRANSFER,
+ 0xFF, MS_TRANSFER_START | trans_mode);
+ rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, MS_TRANSFER,
+ MS_TRANSFER_END, MS_TRANSFER_END);
+
+ err = rtsx_usb_send_cmd(ucr, flag | STAGE_MS_STATUS, 100);
+ if (err)
+ return err;
+
+ err = rtsx_usb_transfer_data(ucr, pipe, sg, length,
+ 1, NULL, 10000);
+ if (err)
+ goto err_out;
+
+ err = rtsx_usb_get_rsp(ucr, 3, 15000);
+ if (err)
+ goto err_out;
+
+ if (ucr->rsp_buf[0] & MS_TRANSFER_ERR ||
+ ucr->rsp_buf[1] & (MS_CRC16_ERR | MS_RDY_TIMEOUT)) {
+ err = -EIO;
+ goto err_out;
+ }
+ return 0;
+err_out:
+ ms_clear_error(host);
+ return err;
+}
+
+static int ms_write_bytes(struct rtsx_usb_ms *host, u8 tpc,
+ u8 cfg, u8 cnt, u8 *data, u8 *int_reg)
+{
+ struct rtsx_ucr *ucr = host->ucr;
+ int err, i;
+
+ dev_dbg(ms_dev(host), "%s: tpc = 0x%02x\n", __func__, tpc);
+
+ rtsx_usb_init_cmd(ucr);
+
+ for (i = 0; i < cnt; i++)
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+ PPBUF_BASE2 + i, 0xFF, data[i]);
+
+ if (cnt % 2)
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+ PPBUF_BASE2 + i, 0xFF, 0xFF);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TPC, 0xFF, tpc);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_BYTE_CNT, 0xFF, cnt);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF, cfg);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_DATA_SOURCE,
+ 0x01, PINGPONG_BUFFER);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TRANSFER,
+ 0xFF, MS_TRANSFER_START | MS_TM_WRITE_BYTES);
+ rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, MS_TRANSFER,
+ MS_TRANSFER_END, MS_TRANSFER_END);
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, MS_TRANS_CFG, 0, 0);
+
+ err = rtsx_usb_send_cmd(ucr, MODE_CR, 100);
+ if (err)
+ return err;
+
+ err = rtsx_usb_get_rsp(ucr, 2, 5000);
+ if (err || (ucr->rsp_buf[0] & MS_TRANSFER_ERR)) {
+ u8 val;
+
+ rtsx_usb_ep0_read_register(ucr, MS_TRANS_CFG, &val);
+ dev_dbg(ms_dev(host), "MS_TRANS_CFG: 0x%02x\n", val);
+
+ if (int_reg)
+ *int_reg = val & 0x0F;
+
+ ms_print_debug_regs(host);
+
+ ms_clear_error(host);
+
+ if (!(tpc & 0x08)) {
+ if (val & MS_CRC16_ERR)
+ return -EIO;
+ } else {
+ if (!(val & 0x80)) {
+ if (val & (MS_INT_ERR | MS_INT_CMDNK))
+ return -EIO;
+ }
+ }
+
+ return -ETIMEDOUT;
+ }
+
+ if (int_reg)
+ *int_reg = ucr->rsp_buf[1] & 0x0F;
+
+ return 0;
+}
+
+static int ms_read_bytes(struct rtsx_usb_ms *host, u8 tpc,
+ u8 cfg, u8 cnt, u8 *data, u8 *int_reg)
+{
+ struct rtsx_ucr *ucr = host->ucr;
+ int err, i;
+ u8 *ptr;
+
+ dev_dbg(ms_dev(host), "%s: tpc = 0x%02x\n", __func__, tpc);
+
+ rtsx_usb_init_cmd(ucr);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TPC, 0xFF, tpc);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_BYTE_CNT, 0xFF, cnt);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF, cfg);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_DATA_SOURCE,
+ 0x01, PINGPONG_BUFFER);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TRANSFER,
+ 0xFF, MS_TRANSFER_START | MS_TM_READ_BYTES);
+ rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, MS_TRANSFER,
+ MS_TRANSFER_END, MS_TRANSFER_END);
+ for (i = 0; i < cnt - 1; i++)
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, PPBUF_BASE2 + i, 0, 0);
+ if (cnt % 2)
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, PPBUF_BASE2 + cnt, 0, 0);
+ else
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD,
+ PPBUF_BASE2 + cnt - 1, 0, 0);
+
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, MS_TRANS_CFG, 0, 0);
+
+ err = rtsx_usb_send_cmd(ucr, MODE_CR, 100);
+ if (err)
+ return err;
+
+ err = rtsx_usb_get_rsp(ucr, cnt + 2, 5000);
+ if (err || (ucr->rsp_buf[0] & MS_TRANSFER_ERR)) {
+ u8 val;
+
+ rtsx_usb_ep0_read_register(ucr, MS_TRANS_CFG, &val);
+ dev_dbg(ms_dev(host), "MS_TRANS_CFG: 0x%02x\n", val);
+
+ if (int_reg && (host->ifmode != MEMSTICK_SERIAL))
+ *int_reg = val & 0x0F;
+
+ ms_print_debug_regs(host);
+
+ ms_clear_error(host);
+
+ if (!(tpc & 0x08)) {
+ if (val & MS_CRC16_ERR)
+ return -EIO;
+ } else {
+ if (!(val & 0x80)) {
+ if (val & (MS_INT_ERR | MS_INT_CMDNK))
+ return -EIO;
+ }
+ }
+
+ return -ETIMEDOUT;
+ }
+
+ ptr = ucr->rsp_buf + 1;
+ for (i = 0; i < cnt; i++)
+ data[i] = *ptr++;
+
+
+ if (int_reg && (host->ifmode != MEMSTICK_SERIAL))
+ *int_reg = *ptr & 0x0F;
+
+ return 0;
+}
+
+static int rtsx_usb_ms_issue_cmd(struct rtsx_usb_ms *host)
+{
+ struct memstick_request *req = host->req;
+ int err = 0;
+ u8 cfg = 0, int_reg;
+
+ dev_dbg(ms_dev(host), "%s\n", __func__);
+
+ if (req->need_card_int) {
+ if (host->ifmode != MEMSTICK_SERIAL)
+ cfg = WAIT_INT;
+ }
+
+ if (req->long_data) {
+ err = ms_transfer_data(host, req->data_dir,
+ req->tpc, cfg, &(req->sg));
+ } else {
+ if (req->data_dir == READ)
+ err = ms_read_bytes(host, req->tpc, cfg,
+ req->data_len, req->data, &int_reg);
+ else
+ err = ms_write_bytes(host, req->tpc, cfg,
+ req->data_len, req->data, &int_reg);
+ }
+ if (err < 0)
+ return err;
+
+ if (req->need_card_int) {
+ if (host->ifmode == MEMSTICK_SERIAL) {
+ err = ms_read_bytes(host, MS_TPC_GET_INT,
+ NO_WAIT_INT, 1, &req->int_reg, NULL);
+ if (err < 0)
+ return err;
+ } else {
+
+ if (int_reg & MS_INT_CMDNK)
+ req->int_reg |= MEMSTICK_INT_CMDNAK;
+ if (int_reg & MS_INT_BREQ)
+ req->int_reg |= MEMSTICK_INT_BREQ;
+ if (int_reg & MS_INT_ERR)
+ req->int_reg |= MEMSTICK_INT_ERR;
+ if (int_reg & MS_INT_CED)
+ req->int_reg |= MEMSTICK_INT_CED;
+ }
+ dev_dbg(ms_dev(host), "int_reg: 0x%02x\n", req->int_reg);
+ }
+
+ return 0;
+}
+
+static void rtsx_usb_ms_handle_req(struct work_struct *work)
+{
+ struct rtsx_usb_ms *host = container_of(work,
+ struct rtsx_usb_ms, handle_req);
+ struct rtsx_ucr *ucr = host->ucr;
+ struct memstick_host *msh = host->msh;
+ int rc;
+
+ if (!host->req) {
+ do {
+ rc = memstick_next_req(msh, &host->req);
+ dev_dbg(ms_dev(host), "next req %d\n", rc);
+
+ if (!rc) {
+ mutex_lock(&ucr->dev_mutex);
+
+ if (rtsx_usb_card_exclusive_check(ucr,
+ RTSX_USB_MS_CARD))
+ host->req->error = -EIO;
+ else
+ host->req->error =
+ rtsx_usb_ms_issue_cmd(host);
+
+ mutex_unlock(&ucr->dev_mutex);
+
+ dev_dbg(ms_dev(host), "req result %d\n",
+ host->req->error);
+ }
+ } while (!rc);
+ }
+
+}
+
+static void rtsx_usb_ms_request(struct memstick_host *msh)
+{
+ struct rtsx_usb_ms *host = memstick_priv(msh);
+
+ dev_dbg(ms_dev(host), "--> %s\n", __func__);
+
+ if (!host->eject)
+ schedule_work(&host->handle_req);
+}
+
+static int rtsx_usb_ms_set_param(struct memstick_host *msh,
+ enum memstick_param param, int value)
+{
+ struct rtsx_usb_ms *host = memstick_priv(msh);
+ struct rtsx_ucr *ucr = host->ucr;
+ unsigned int clock = 0;
+ u8 ssc_depth = 0;
+ int err;
+
+ dev_dbg(ms_dev(host), "%s: param = %d, value = %d\n",
+ __func__, param, value);
+
+ mutex_lock(&ucr->dev_mutex);
+
+ err = rtsx_usb_card_exclusive_check(ucr, RTSX_USB_MS_CARD);
+ if (err)
+ goto out;
+
+ switch (param) {
+ case MEMSTICK_POWER:
+ if (value == host->power_mode)
+ break;
+
+ if (value == MEMSTICK_POWER_ON) {
+ pm_runtime_get_sync(ms_dev(host));
+ err = ms_power_on(host);
+ } else if (value == MEMSTICK_POWER_OFF) {
+ err = ms_power_off(host);
+ if (host->msh->card)
+ pm_runtime_put_noidle(ms_dev(host));
+ else
+ pm_runtime_put(ms_dev(host));
+ } else
+ err = -EINVAL;
+ if (!err)
+ host->power_mode = value;
+ break;
+
+ case MEMSTICK_INTERFACE:
+ if (value == MEMSTICK_SERIAL) {
+ clock = 19000000;
+ ssc_depth = SSC_DEPTH_512K;
+ err = rtsx_usb_write_register(ucr, MS_CFG, 0x5A,
+ MS_BUS_WIDTH_1 | PUSH_TIME_DEFAULT);
+ if (err < 0)
+ break;
+ } else if (value == MEMSTICK_PAR4) {
+ clock = 39000000;
+ ssc_depth = SSC_DEPTH_1M;
+
+ err = rtsx_usb_write_register(ucr, MS_CFG, 0x5A,
+ MS_BUS_WIDTH_4 | PUSH_TIME_ODD |
+ MS_NO_CHECK_INT);
+ if (err < 0)
+ break;
+ } else {
+ err = -EINVAL;
+ break;
+ }
+
+ err = rtsx_usb_switch_clock(ucr, clock,
+ ssc_depth, false, true, false);
+ if (err < 0) {
+ dev_dbg(ms_dev(host), "switch clock failed\n");
+ break;
+ }
+
+ host->ssc_depth = ssc_depth;
+ host->clock = clock;
+ host->ifmode = value;
+ break;
+ default:
+ err = -EINVAL;
+ break;
+ }
+out:
+ mutex_unlock(&ucr->dev_mutex);
+
+ /* power-on delay */
+ if (param == MEMSTICK_POWER && value == MEMSTICK_POWER_ON)
+ usleep_range(10000, 12000);
+
+ dev_dbg(ms_dev(host), "%s: return = %d\n", __func__, err);
+ return err;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int rtsx_usb_ms_suspend(struct device *dev)
+{
+ struct rtsx_usb_ms *host = dev_get_drvdata(dev);
+ struct memstick_host *msh = host->msh;
+
+ dev_dbg(ms_dev(host), "--> %s\n", __func__);
+
+ memstick_suspend_host(msh);
+ return 0;
+}
+
+static int rtsx_usb_ms_resume(struct device *dev)
+{
+ struct rtsx_usb_ms *host = dev_get_drvdata(dev);
+ struct memstick_host *msh = host->msh;
+
+ dev_dbg(ms_dev(host), "--> %s\n", __func__);
+
+ memstick_resume_host(msh);
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+/*
+ * Thread function of ms card slot detection. The thread starts right after
+ * successful host addition. It stops while the driver removal function sets
+ * host->eject true.
+ */
+static int rtsx_usb_detect_ms_card(void *__host)
+{
+ struct rtsx_usb_ms *host = (struct rtsx_usb_ms *)__host;
+ struct rtsx_ucr *ucr = host->ucr;
+ u8 val = 0;
+ int err;
+
+ for (;;) {
+ mutex_lock(&ucr->dev_mutex);
+
+ /* Check pending MS card changes */
+ err = rtsx_usb_read_register(ucr, CARD_INT_PEND, &val);
+ if (err) {
+ mutex_unlock(&ucr->dev_mutex);
+ goto poll_again;
+ }
+
+ /* Clear the pending */
+ rtsx_usb_write_register(ucr, CARD_INT_PEND,
+ XD_INT | MS_INT | SD_INT,
+ XD_INT | MS_INT | SD_INT);
+
+ mutex_unlock(&ucr->dev_mutex);
+
+ if (val & MS_INT) {
+ dev_dbg(ms_dev(host), "MS slot change detected\n");
+ memstick_detect_change(host->msh);
+ }
+
+poll_again:
+ if (host->eject)
+ break;
+
+ msleep(1000);
+ }
+
+ complete(&host->detect_ms_exit);
+ return 0;
+}
+
+static int rtsx_usb_ms_drv_probe(struct platform_device *pdev)
+{
+ struct memstick_host *msh;
+ struct rtsx_usb_ms *host;
+ struct rtsx_ucr *ucr;
+ int err;
+
+ ucr = usb_get_intfdata(to_usb_interface(pdev->dev.parent));
+ if (!ucr)
+ return -ENXIO;
+
+ dev_dbg(&(pdev->dev),
+ "Realtek USB Memstick controller found\n");
+
+ msh = memstick_alloc_host(sizeof(*host), &pdev->dev);
+ if (!msh)
+ return -ENOMEM;
+
+ host = memstick_priv(msh);
+ host->ucr = ucr;
+ host->msh = msh;
+ host->pdev = pdev;
+ host->power_mode = MEMSTICK_POWER_OFF;
+ platform_set_drvdata(pdev, host);
+
+ mutex_init(&host->host_mutex);
+ INIT_WORK(&host->handle_req, rtsx_usb_ms_handle_req);
+
+ init_completion(&host->detect_ms_exit);
+ host->detect_ms = kthread_create(rtsx_usb_detect_ms_card, host,
+ "rtsx_usb_ms_%d", pdev->id);
+ if (IS_ERR(host->detect_ms)) {
+ dev_dbg(&(pdev->dev),
+ "Unable to create polling thread.\n");
+ err = PTR_ERR(host->detect_ms);
+ goto err_out;
+ }
+
+ msh->request = rtsx_usb_ms_request;
+ msh->set_param = rtsx_usb_ms_set_param;
+ msh->caps = MEMSTICK_CAP_PAR4;
+
+ pm_runtime_enable(&pdev->dev);
+ err = memstick_add_host(msh);
+ if (err)
+ goto err_out;
+
+ wake_up_process(host->detect_ms);
+ return 0;
+err_out:
+ memstick_free_host(msh);
+ return err;
+}
+
+static int rtsx_usb_ms_drv_remove(struct platform_device *pdev)
+{
+ struct rtsx_usb_ms *host = platform_get_drvdata(pdev);
+ struct memstick_host *msh;
+ int err;
+
+ msh = host->msh;
+ host->eject = true;
+ cancel_work_sync(&host->handle_req);
+
+ mutex_lock(&host->host_mutex);
+ if (host->req) {
+ dev_dbg(&(pdev->dev),
+ "%s: Controller removed during transfer\n",
+ dev_name(&msh->dev));
+ host->req->error = -ENOMEDIUM;
+ do {
+ err = memstick_next_req(msh, &host->req);
+ if (!err)
+ host->req->error = -ENOMEDIUM;
+ } while (!err);
+ }
+ mutex_unlock(&host->host_mutex);
+
+ wait_for_completion(&host->detect_ms_exit);
+ memstick_remove_host(msh);
+ memstick_free_host(msh);
+
+ /* Balance possible unbalanced usage count
+ * e.g. unconditional module removal
+ */
+ if (pm_runtime_active(ms_dev(host)))
+ pm_runtime_put(ms_dev(host));
+
+ pm_runtime_disable(&pdev->dev);
+ platform_set_drvdata(pdev, NULL);
+
+ dev_dbg(&(pdev->dev),
+ ": Realtek USB Memstick controller has been removed\n");
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(rtsx_usb_ms_pm_ops,
+ rtsx_usb_ms_suspend, rtsx_usb_ms_resume);
+
+static struct platform_device_id rtsx_usb_ms_ids[] = {
+ {
+ .name = "rtsx_usb_ms",
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, rtsx_usb_ms_ids);
+
+static struct platform_driver rtsx_usb_ms_driver = {
+ .probe = rtsx_usb_ms_drv_probe,
+ .remove = rtsx_usb_ms_drv_remove,
+ .id_table = rtsx_usb_ms_ids,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "rtsx_usb_ms",
+ .pm = &rtsx_usb_ms_pm_ops,
+ },
+};
+module_platform_driver(rtsx_usb_ms_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Roger Tseng <rogerable@realtek.com>");
+MODULE_DESCRIPTION("Realtek USB Memstick Card Host Driver");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 6deb8a11c12f..ee8204cc31e9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -67,6 +67,18 @@ config MFD_BCM590XX
help
Support for the BCM590xx PMUs from Broadcom
+config MFD_AXP20X
+ bool "X-Powers AXP20X"
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ depends on I2C=y
+ help
+ If you say Y here you get support for the X-Powers AXP202 and AXP209.
+ This driver include only the core APIs. You have to select individual
+ components like regulators or the PEK (Power Enable Key) under the
+ corresponding menus.
+
config MFD_CROS_EC
tristate "ChromeOS Embedded Controller"
select MFD_CORE
@@ -250,6 +262,16 @@ config MFD_INTEL_MSIC
Passage) chip. This chip embeds audio, battery, GPIO, etc.
devices used in Intel Medfield platforms.
+config MFD_IPAQ_MICRO
+ bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
+ depends on SA1100_H3100 || SA1100_H3600
+ select MFD_CORE
+ help
+ Select this to get support for the Microcontroller found in
+ the Compaq iPAQ handheld computers. This is an Atmel
+ AT90LS8535 microcontroller flashed with a special iPAQ
+ firmware using the custom protocol implemented in this driver.
+
config MFD_JANZ_CMODIO
tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
select MFD_CORE
@@ -675,6 +697,7 @@ config MFD_DB8500_PRCMU
config MFD_STMPE
bool "STMicroelectronics STMPE"
depends on (I2C=y || SPI_MASTER=y)
+ depends on OF
select MFD_CORE
help
Support for the STMPE family of I/O Expanders from
@@ -719,6 +742,14 @@ config MFD_STA2X11
select MFD_CORE
select REGMAP_MMIO
+config MFD_SUN6I_PRCM
+ bool "Allwinner A31 PRCM controller"
+ depends on ARCH_SUNXI
+ select MFD_CORE
+ help
+ Support for the PRCM (Power/Reset/Clock Management) unit available
+ in A31 SoC.
+
config MFD_SYSCON
bool "System Controller Register R/W Based on Regmap"
select REGMAP_MMIO
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index cec3487b539e..8afedba535c7 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_MFD_STA2X11) += sta2x11-mfd.o
obj-$(CONFIG_MFD_STMPE) += stmpe.o
obj-$(CONFIG_STMPE_I2C) += stmpe-i2c.o
obj-$(CONFIG_STMPE_SPI) += stmpe-spi.o
+obj-$(CONFIG_MFD_SUN6I_PRCM) += sun6i-prcm.o
obj-$(CONFIG_MFD_TC3589X) += tc3589x.o
obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o tmio_core.o
obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o tmio_core.o
@@ -102,6 +103,7 @@ obj-$(CONFIG_PMIC_DA9052) += da9052-irq.o
obj-$(CONFIG_PMIC_DA9052) += da9052-core.o
obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o
obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o
+obj-$(CONFIG_MFD_AXP20X) += axp20x.o
obj-$(CONFIG_MFD_LP3943) += lp3943.o
obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o
@@ -166,3 +168,4 @@ obj-$(CONFIG_MFD_RETU) += retu-mfd.o
obj-$(CONFIG_MFD_AS3711) += as3711.o
obj-$(CONFIG_MFD_AS3722) += as3722.o
obj-$(CONFIG_MFD_STW481X) += stw481x.o
+obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
diff --git a/drivers/mfd/abx500-core.c b/drivers/mfd/abx500-core.c
index f3a15aa54d7b..fe418995108c 100644
--- a/drivers/mfd/abx500-core.c
+++ b/drivers/mfd/abx500-core.c
@@ -151,22 +151,6 @@ int abx500_startup_irq_enabled(struct device *dev, unsigned int irq)
}
EXPORT_SYMBOL(abx500_startup_irq_enabled);
-void abx500_dump_all_banks(void)
-{
- struct abx500_ops *ops;
- struct device dummy_child = {NULL};
- struct abx500_device_entry *dev_entry;
-
- list_for_each_entry(dev_entry, &abx500_list, list) {
- dummy_child.parent = dev_entry->dev;
- ops = &dev_entry->ops;
-
- if ((ops != NULL) && (ops->dump_all_banks != NULL))
- ops->dump_all_banks(&dummy_child);
- }
-}
-EXPORT_SYMBOL(abx500_dump_all_banks);
-
MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
MODULE_DESCRIPTION("ABX500 core driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 07e6e27be23c..cfc191abae4a 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -583,6 +583,7 @@ static const char *wm5102_supplies[] = {
"CPVDD",
"SPKVDDL",
"SPKVDDR",
+ "MICVDD",
};
static const struct mfd_cell wm5102_devs[] = {
diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c
index 88758ab9402b..17102f589100 100644
--- a/drivers/mfd/arizona-irq.c
+++ b/drivers/mfd/arizona-irq.c
@@ -285,7 +285,7 @@ int arizona_irq_init(struct arizona *arizona)
IRQF_ONESHOT, -1, irq,
&arizona->irq_chip);
if (ret != 0) {
- dev_err(arizona->dev, "Failed to add AOD IRQs: %d\n", ret);
+ dev_err(arizona->dev, "Failed to add main IRQs: %d\n", ret);
goto err_aod;
}
diff --git a/drivers/mfd/as3711.c b/drivers/mfd/as3711.c
index ec684fcedb42..d9706ede8d39 100644
--- a/drivers/mfd/as3711.c
+++ b/drivers/mfd/as3711.c
@@ -114,7 +114,7 @@ static const struct regmap_config as3711_regmap_config = {
};
#ifdef CONFIG_OF
-static struct of_device_id as3711_of_match[] = {
+static const struct of_device_id as3711_of_match[] = {
{.compatible = "ams,as3711",},
{}
};
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
new file mode 100644
index 000000000000..dee653989e3a
--- /dev/null
+++ b/drivers/mfd/axp20x.c
@@ -0,0 +1,258 @@
+/*
+ * axp20x.c - MFD core driver for the X-Powers AXP202 and AXP209
+ *
+ * AXP20x comprises an adaptive USB-Compatible PWM charger, 2 BUCK DC-DC
+ * converters, 5 LDOs, multiple 12-bit ADCs of voltage, current and temperature
+ * as well as 4 configurable GPIOs.
+ *
+ * Author: Carlo Caione <carlo@caione.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/regulator/consumer.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/mfd/core.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+
+#define AXP20X_OFF 0x80
+
+static const struct regmap_range axp20x_writeable_ranges[] = {
+ regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
+ regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
+};
+
+static const struct regmap_range axp20x_volatile_ranges[] = {
+ regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE),
+};
+
+static const struct regmap_access_table axp20x_writeable_table = {
+ .yes_ranges = axp20x_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp20x_writeable_ranges),
+};
+
+static const struct regmap_access_table axp20x_volatile_table = {
+ .yes_ranges = axp20x_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges),
+};
+
+static struct resource axp20x_pek_resources[] = {
+ {
+ .name = "PEK_DBR",
+ .start = AXP20X_IRQ_PEK_RIS_EDGE,
+ .end = AXP20X_IRQ_PEK_RIS_EDGE,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .name = "PEK_DBF",
+ .start = AXP20X_IRQ_PEK_FAL_EDGE,
+ .end = AXP20X_IRQ_PEK_FAL_EDGE,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static const struct regmap_config axp20x_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .wr_table = &axp20x_writeable_table,
+ .volatile_table = &axp20x_volatile_table,
+ .max_register = AXP20X_FG_RES,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+#define AXP20X_IRQ(_irq, _off, _mask) \
+ [AXP20X_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
+
+static const struct regmap_irq axp20x_regmap_irqs[] = {
+ AXP20X_IRQ(ACIN_OVER_V, 0, 7),
+ AXP20X_IRQ(ACIN_PLUGIN, 0, 6),
+ AXP20X_IRQ(ACIN_REMOVAL, 0, 5),
+ AXP20X_IRQ(VBUS_OVER_V, 0, 4),
+ AXP20X_IRQ(VBUS_PLUGIN, 0, 3),
+ AXP20X_IRQ(VBUS_REMOVAL, 0, 2),
+ AXP20X_IRQ(VBUS_V_LOW, 0, 1),
+ AXP20X_IRQ(BATT_PLUGIN, 1, 7),
+ AXP20X_IRQ(BATT_REMOVAL, 1, 6),
+ AXP20X_IRQ(BATT_ENT_ACT_MODE, 1, 5),
+ AXP20X_IRQ(BATT_EXIT_ACT_MODE, 1, 4),
+ AXP20X_IRQ(CHARG, 1, 3),
+ AXP20X_IRQ(CHARG_DONE, 1, 2),
+ AXP20X_IRQ(BATT_TEMP_HIGH, 1, 1),
+ AXP20X_IRQ(BATT_TEMP_LOW, 1, 0),
+ AXP20X_IRQ(DIE_TEMP_HIGH, 2, 7),
+ AXP20X_IRQ(CHARG_I_LOW, 2, 6),
+ AXP20X_IRQ(DCDC1_V_LONG, 2, 5),
+ AXP20X_IRQ(DCDC2_V_LONG, 2, 4),
+ AXP20X_IRQ(DCDC3_V_LONG, 2, 3),
+ AXP20X_IRQ(PEK_SHORT, 2, 1),
+ AXP20X_IRQ(PEK_LONG, 2, 0),
+ AXP20X_IRQ(N_OE_PWR_ON, 3, 7),
+ AXP20X_IRQ(N_OE_PWR_OFF, 3, 6),
+ AXP20X_IRQ(VBUS_VALID, 3, 5),
+ AXP20X_IRQ(VBUS_NOT_VALID, 3, 4),
+ AXP20X_IRQ(VBUS_SESS_VALID, 3, 3),
+ AXP20X_IRQ(VBUS_SESS_END, 3, 2),
+ AXP20X_IRQ(LOW_PWR_LVL1, 3, 1),
+ AXP20X_IRQ(LOW_PWR_LVL2, 3, 0),
+ AXP20X_IRQ(TIMER, 4, 7),
+ AXP20X_IRQ(PEK_RIS_EDGE, 4, 6),
+ AXP20X_IRQ(PEK_FAL_EDGE, 4, 5),
+ AXP20X_IRQ(GPIO3_INPUT, 4, 3),
+ AXP20X_IRQ(GPIO2_INPUT, 4, 2),
+ AXP20X_IRQ(GPIO1_INPUT, 4, 1),
+ AXP20X_IRQ(GPIO0_INPUT, 4, 0),
+};
+
+static const struct of_device_id axp20x_of_match[] = {
+ { .compatible = "x-powers,axp202", .data = (void *) AXP202_ID },
+ { .compatible = "x-powers,axp209", .data = (void *) AXP209_ID },
+ { },
+};
+MODULE_DEVICE_TABLE(of, axp20x_of_match);
+
+/*
+ * This is useless for OF-enabled devices, but it is needed by I2C subsystem
+ */
+static const struct i2c_device_id axp20x_i2c_id[] = {
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id);
+
+static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
+ .name = "axp20x_irq_chip",
+ .status_base = AXP20X_IRQ1_STATE,
+ .ack_base = AXP20X_IRQ1_STATE,
+ .mask_base = AXP20X_IRQ1_EN,
+ .num_regs = 5,
+ .irqs = axp20x_regmap_irqs,
+ .num_irqs = ARRAY_SIZE(axp20x_regmap_irqs),
+ .mask_invert = true,
+ .init_ack_masked = true,
+};
+
+static const char * const axp20x_supplies[] = {
+ "acin",
+ "vin2",
+ "vin3",
+ "ldo24in",
+ "ldo3in",
+ "ldo5in",
+};
+
+static struct mfd_cell axp20x_cells[] = {
+ {
+ .name = "axp20x-pek",
+ .num_resources = ARRAY_SIZE(axp20x_pek_resources),
+ .resources = axp20x_pek_resources,
+ }, {
+ .name = "axp20x-regulator",
+ .parent_supplies = axp20x_supplies,
+ .num_parent_supplies = ARRAY_SIZE(axp20x_supplies),
+ },
+};
+
+static struct axp20x_dev *axp20x_pm_power_off;
+static void axp20x_power_off(void)
+{
+ regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL,
+ AXP20X_OFF);
+}
+
+static int axp20x_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct axp20x_dev *axp20x;
+ const struct of_device_id *of_id;
+ int ret;
+
+ axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL);
+ if (!axp20x)
+ return -ENOMEM;
+
+ of_id = of_match_device(axp20x_of_match, &i2c->dev);
+ if (!of_id) {
+ dev_err(&i2c->dev, "Unable to setup AXP20X data\n");
+ return -ENODEV;
+ }
+ axp20x->variant = (long) of_id->data;
+
+ axp20x->i2c_client = i2c;
+ axp20x->dev = &i2c->dev;
+ dev_set_drvdata(axp20x->dev, axp20x);
+
+ axp20x->regmap = devm_regmap_init_i2c(i2c, &axp20x_regmap_config);
+ if (IS_ERR(axp20x->regmap)) {
+ ret = PTR_ERR(axp20x->regmap);
+ dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_add_irq_chip(axp20x->regmap, i2c->irq,
+ IRQF_ONESHOT | IRQF_SHARED, -1,
+ &axp20x_regmap_irq_chip,
+ &axp20x->regmap_irqc);
+ if (ret) {
+ dev_err(&i2c->dev, "failed to add irq chip: %d\n", ret);
+ return ret;
+ }
+
+ ret = mfd_add_devices(axp20x->dev, -1, axp20x_cells,
+ ARRAY_SIZE(axp20x_cells), NULL, 0, NULL);
+
+ if (ret) {
+ dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret);
+ regmap_del_irq_chip(i2c->irq, axp20x->regmap_irqc);
+ return ret;
+ }
+
+ if (!pm_power_off) {
+ axp20x_pm_power_off = axp20x;
+ pm_power_off = axp20x_power_off;
+ }
+
+ dev_info(&i2c->dev, "AXP20X driver loaded\n");
+
+ return 0;
+}
+
+static int axp20x_i2c_remove(struct i2c_client *i2c)
+{
+ struct axp20x_dev *axp20x = i2c_get_clientdata(i2c);
+
+ if (axp20x == axp20x_pm_power_off) {
+ axp20x_pm_power_off = NULL;
+ pm_power_off = NULL;
+ }
+
+ mfd_remove_devices(axp20x->dev);
+ regmap_del_irq_chip(axp20x->i2c_client->irq, axp20x->regmap_irqc);
+
+ return 0;
+}
+
+static struct i2c_driver axp20x_i2c_driver = {
+ .driver = {
+ .name = "axp20x",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(axp20x_of_match),
+ },
+ .probe = axp20x_i2c_probe,
+ .remove = axp20x_i2c_remove,
+ .id_table = axp20x_i2c_id,
+};
+
+module_i2c_driver(axp20x_i2c_driver);
+
+MODULE_DESCRIPTION("PMIC MFD core driver for AXP20X");
+MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/bcm590xx.c b/drivers/mfd/bcm590xx.c
index 43cba1a1973c..e334de000e8c 100644
--- a/drivers/mfd/bcm590xx.c
+++ b/drivers/mfd/bcm590xx.c
@@ -96,6 +96,12 @@ err:
return ret;
}
+static int bcm590xx_i2c_remove(struct i2c_client *i2c)
+{
+ mfd_remove_devices(&i2c->dev);
+ return 0;
+}
+
static const struct of_device_id bcm590xx_of_match[] = {
{ .compatible = "brcm,bcm59056" },
{ }
@@ -115,6 +121,7 @@ static struct i2c_driver bcm590xx_i2c_driver = {
.of_match_table = of_match_ptr(bcm590xx_of_match),
},
.probe = bcm590xx_i2c_probe,
+ .remove = bcm590xx_i2c_remove,
.id_table = bcm590xx_i2c_id,
};
module_i2c_driver(bcm590xx_i2c_driver);
@@ -122,4 +129,4 @@ module_i2c_driver(bcm590xx_i2c_driver);
MODULE_AUTHOR("Matt Porter <mporter@linaro.org>");
MODULE_DESCRIPTION("BCM590xx multi-function driver");
MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:bcm590xx");
+MODULE_ALIAS("i2c:bcm590xx");
diff --git a/drivers/mfd/cros_ec.c b/drivers/mfd/cros_ec.c
index 783fe2e73e1e..38fe9bf0d169 100644
--- a/drivers/mfd/cros_ec.c
+++ b/drivers/mfd/cros_ec.c
@@ -30,7 +30,7 @@ int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
uint8_t *out;
int csum, i;
- BUG_ON(msg->out_len > EC_HOST_PARAM_SIZE);
+ BUG_ON(msg->out_len > EC_PROTO2_MAX_PARAM_SIZE);
out = ec_dev->dout;
out[0] = EC_CMD_VERSION0 + msg->version;
out[1] = msg->cmd;
@@ -90,6 +90,11 @@ static const struct mfd_cell cros_devs[] = {
.id = 1,
.of_compatible = "google,cros-ec-keyb",
},
+ {
+ .name = "cros-ec-i2c-tunnel",
+ .id = 2,
+ .of_compatible = "google,cros-ec-i2c-tunnel",
+ },
};
int cros_ec_register(struct cros_ec_device *ec_dev)
@@ -184,3 +189,6 @@ int cros_ec_resume(struct cros_ec_device *ec_dev)
EXPORT_SYMBOL(cros_ec_resume);
#endif
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ChromeOS EC core driver");
diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c
index 84af8d7a4295..0b8d32829166 100644
--- a/drivers/mfd/cros_ec_spi.c
+++ b/drivers/mfd/cros_ec_spi.c
@@ -39,14 +39,22 @@
#define EC_MSG_PREAMBLE_COUNT 32
/*
- * We must get a response from the EC in 5ms. This is a very long
- * time, but the flash write command can take 2-3ms. The EC command
- * processing is currently not very fast (about 500us). We could
- * look at speeding this up and making the flash write command a
- * 'slow' command, requiring a GET_STATUS wait loop, like flash
- * erase.
- */
-#define EC_MSG_DEADLINE_MS 5
+ * Allow for a long time for the EC to respond. We support i2c
+ * tunneling and support fairly long messages for the tunnel (249
+ * bytes long at the moment). If we're talking to a 100 kHz device
+ * on the other end and need to transfer ~256 bytes, then we need:
+ * 10 us/bit * ~10 bits/byte * ~256 bytes = ~25ms
+ *
+ * We'll wait 4 times that to handle clock stretching and other
+ * paranoia.
+ *
+ * It's pretty unlikely that we'll really see a 249 byte tunnel in
+ * anything other than testing. If this was more common we might
+ * consider having slow commands like this require a GET_STATUS
+ * wait loop. The 'flash write' command would be another candidate
+ * for this, clocking in at 2-3ms.
+ */
+#define EC_MSG_DEADLINE_MS 100
/*
* Time between raising the SPI chip select (for the end of a
@@ -65,11 +73,13 @@
* if no record
* @end_of_msg_delay: used to set the delay_usecs on the spi_transfer that
* is sent when we want to turn off CS at the end of a transaction.
+ * @lock: mutex to ensure only one user of cros_ec_command_spi_xfer at a time
*/
struct cros_ec_spi {
struct spi_device *spi;
s64 last_transfer_ns;
unsigned int end_of_msg_delay;
+ struct mutex lock;
};
static void debug_packet(struct device *dev, const char *name, u8 *ptr,
@@ -111,7 +121,9 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev,
/* Receive data until we see the header byte */
deadline = jiffies + msecs_to_jiffies(EC_MSG_DEADLINE_MS);
- do {
+ while (true) {
+ unsigned long start_jiffies = jiffies;
+
memset(&trans, 0, sizeof(trans));
trans.cs_change = 1;
trans.rx_buf = ptr = ec_dev->din;
@@ -132,12 +144,19 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev,
break;
}
}
+ if (ptr != end)
+ break;
- if (time_after(jiffies, deadline)) {
+ /*
+ * Use the time at the start of the loop as a timeout. This
+ * gives us one last shot at getting the transfer and is useful
+ * in case we got context switched out for a while.
+ */
+ if (time_after(start_jiffies, deadline)) {
dev_warn(ec_dev->dev, "EC failed to respond in time\n");
return -ETIMEDOUT;
}
- } while (ptr == end);
+ }
/*
* ptr now points to the header byte. Copy any valid data to the
@@ -208,6 +227,13 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev,
int ret = 0, final_ret;
struct timespec ts;
+ /*
+ * We have the shared ec_dev buffer plus we do lots of separate spi_sync
+ * calls, so we need to make sure only one person is using this at a
+ * time.
+ */
+ mutex_lock(&ec_spi->lock);
+
len = cros_ec_prepare_tx(ec_dev, ec_msg);
dev_dbg(ec_dev->dev, "prepared, len=%d\n", len);
@@ -219,7 +245,7 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev,
ktime_get_ts(&ts);
delay = timespec_to_ns(&ts) - ec_spi->last_transfer_ns;
if (delay < EC_SPI_RECOVERY_TIME_NS)
- ndelay(delay);
+ ndelay(EC_SPI_RECOVERY_TIME_NS - delay);
}
/* Transmit phase - send our message */
@@ -260,7 +286,7 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev,
ret = final_ret;
if (ret < 0) {
dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret);
- return ret;
+ goto exit;
}
/* check response error code */
@@ -269,14 +295,16 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev,
dev_warn(ec_dev->dev, "command 0x%02x returned an error %d\n",
ec_msg->cmd, ptr[0]);
debug_packet(ec_dev->dev, "in_err", ptr, len);
- return -EINVAL;
+ ret = -EINVAL;
+ goto exit;
}
len = ptr[1];
sum = ptr[0] + ptr[1];
if (len > ec_msg->in_len) {
dev_err(ec_dev->dev, "packet too long (%d bytes, expected %d)",
len, ec_msg->in_len);
- return -ENOSPC;
+ ret = -ENOSPC;
+ goto exit;
}
/* copy response packet payload and compute checksum */
@@ -293,10 +321,14 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev,
dev_err(ec_dev->dev,
"bad packet checksum, expected %02x, got %02x\n",
sum, ptr[len + 2]);
- return -EBADMSG;
+ ret = -EBADMSG;
+ goto exit;
}
- return 0;
+ ret = 0;
+exit:
+ mutex_unlock(&ec_spi->lock);
+ return ret;
}
static void cros_ec_spi_dt_probe(struct cros_ec_spi *ec_spi, struct device *dev)
@@ -327,6 +359,7 @@ static int cros_ec_spi_probe(struct spi_device *spi)
if (ec_spi == NULL)
return -ENOMEM;
ec_spi->spi = spi;
+ mutex_init(&ec_spi->lock);
ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
if (!ec_dev)
return -ENOMEM;
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index b11fdd63eecd..193cf168ba84 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -2300,9 +2300,6 @@ int prcmu_ac_wake_req(void)
if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
msecs_to_jiffies(5000))) {
-#if defined(CONFIG_DBX500_PRCMU_DEBUG)
- db8500_prcmu_debug_dump(__func__, true, true);
-#endif
pr_crit("prcmu: %s timed out (5 s) waiting for a reply.\n",
__func__);
ret = -EFAULT;
@@ -3112,7 +3109,7 @@ static int db8500_prcmu_register_ab8500(struct device *parent,
{
struct device_node *np;
struct resource ab8500_resource;
- struct mfd_cell ab8500_cell = {
+ const struct mfd_cell ab8500_cell = {
.name = "ab8500-core",
.of_compatible = "stericsson,ab8500",
.id = AB8500_VERSION_AB8500,
diff --git a/drivers/mfd/ipaq-micro.c b/drivers/mfd/ipaq-micro.c
new file mode 100644
index 000000000000..7e50fe0118e3
--- /dev/null
+++ b/drivers/mfd/ipaq-micro.c
@@ -0,0 +1,482 @@
+/*
+ * Compaq iPAQ h3xxx Atmel microcontroller companion support
+ *
+ * This is an Atmel AT90LS8535 with a special flashed-in firmware that
+ * implements the special protocol used by this driver.
+ *
+ * based on previous kernel 2.4 version by Andrew Christian
+ * Author : Alessandro Gardich <gremlin@gremlin.it>
+ * Author : Dmitry Artamonow <mad_soft@inbox.ru>
+ * Author : Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/ipaq-micro.h>
+#include <linux/string.h>
+#include <linux/random.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+
+#include <mach/hardware.h>
+
+static void ipaq_micro_trigger_tx(struct ipaq_micro *micro)
+{
+ struct ipaq_micro_txdev *tx = &micro->tx;
+ struct ipaq_micro_msg *msg = micro->msg;
+ int i, bp;
+ u8 checksum;
+ u32 val;
+
+ bp = 0;
+ tx->buf[bp++] = CHAR_SOF;
+
+ checksum = ((msg->id & 0x0f) << 4) | (msg->tx_len & 0x0f);
+ tx->buf[bp++] = checksum;
+
+ for (i = 0; i < msg->tx_len; i++) {
+ tx->buf[bp++] = msg->tx_data[i];
+ checksum += msg->tx_data[i];
+ }
+
+ tx->buf[bp++] = checksum;
+ tx->len = bp;
+ tx->index = 0;
+ print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_OFFSET, 16, 1,
+ tx->buf, tx->len, true);
+
+ /* Enable interrupt */
+ val = readl(micro->base + UTCR3);
+ val |= UTCR3_TIE;
+ writel(val, micro->base + UTCR3);
+}
+
+int ipaq_micro_tx_msg(struct ipaq_micro *micro, struct ipaq_micro_msg *msg)
+{
+ unsigned long flags;
+
+ dev_dbg(micro->dev, "TX msg: %02x, %d bytes\n", msg->id, msg->tx_len);
+
+ spin_lock_irqsave(&micro->lock, flags);
+ if (micro->msg) {
+ list_add_tail(&msg->node, &micro->queue);
+ spin_unlock_irqrestore(&micro->lock, flags);
+ return 0;
+ }
+ micro->msg = msg;
+ ipaq_micro_trigger_tx(micro);
+ spin_unlock_irqrestore(&micro->lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(ipaq_micro_tx_msg);
+
+static void micro_rx_msg(struct ipaq_micro *micro, u8 id, int len, u8 *data)
+{
+ int i;
+
+ dev_dbg(micro->dev, "RX msg: %02x, %d bytes\n", id, len);
+
+ spin_lock(&micro->lock);
+ switch (id) {
+ case MSG_VERSION:
+ case MSG_EEPROM_READ:
+ case MSG_EEPROM_WRITE:
+ case MSG_BACKLIGHT:
+ case MSG_NOTIFY_LED:
+ case MSG_THERMAL_SENSOR:
+ case MSG_BATTERY:
+ /* Handle synchronous messages */
+ if (micro->msg && micro->msg->id == id) {
+ struct ipaq_micro_msg *msg = micro->msg;
+
+ memcpy(msg->rx_data, data, len);
+ msg->rx_len = len;
+ complete(&micro->msg->ack);
+ if (!list_empty(&micro->queue)) {
+ micro->msg = list_entry(micro->queue.next,
+ struct ipaq_micro_msg,
+ node);
+ list_del_init(&micro->msg->node);
+ ipaq_micro_trigger_tx(micro);
+ } else
+ micro->msg = NULL;
+ dev_dbg(micro->dev, "OK RX message 0x%02x\n", id);
+ } else {
+ dev_err(micro->dev,
+ "out of band RX message 0x%02x\n", id);
+ if(!micro->msg)
+ dev_info(micro->dev, "no message queued\n");
+ else
+ dev_info(micro->dev, "expected message %02x\n",
+ micro->msg->id);
+ }
+ break;
+ case MSG_KEYBOARD:
+ if (micro->key)
+ micro->key(micro->key_data, len, data);
+ else
+ dev_dbg(micro->dev, "key message ignored, no handle \n");
+ break;
+ case MSG_TOUCHSCREEN:
+ if (micro->ts)
+ micro->ts(micro->ts_data, len, data);
+ else
+ dev_dbg(micro->dev, "touchscreen message ignored, no handle \n");
+ break;
+ default:
+ dev_err(micro->dev,
+ "unknown msg %d [%d] ", id, len);
+ for (i = 0; i < len; ++i)
+ pr_cont("0x%02x ", data[i]);
+ pr_cont("\n");
+ }
+ spin_unlock(&micro->lock);
+}
+
+static void micro_process_char(struct ipaq_micro *micro, u8 ch)
+{
+ struct ipaq_micro_rxdev *rx = &micro->rx;
+
+ switch (rx->state) {
+ case STATE_SOF: /* Looking for SOF */
+ if (ch == CHAR_SOF)
+ rx->state = STATE_ID; /* Next byte is the id and len */
+ break;
+ case STATE_ID: /* Looking for id and len byte */
+ rx->id = (ch & 0xf0) >> 4 ;
+ rx->len = (ch & 0x0f);
+ rx->index = 0;
+ rx->chksum = ch;
+ rx->state = (rx->len > 0) ? STATE_DATA : STATE_CHKSUM;
+ break;
+ case STATE_DATA: /* Looking for 'len' data bytes */
+ rx->chksum += ch;
+ rx->buf[rx->index] = ch;
+ if (++rx->index == rx->len)
+ rx->state = STATE_CHKSUM;
+ break;
+ case STATE_CHKSUM: /* Looking for the checksum */
+ if (ch == rx->chksum)
+ micro_rx_msg(micro, rx->id, rx->len, rx->buf);
+ rx->state = STATE_SOF;
+ break;
+ }
+}
+
+static void micro_rx_chars(struct ipaq_micro *micro)
+{
+ u32 status, ch;
+
+ while ((status = readl(micro->base + UTSR1)) & UTSR1_RNE) {
+ ch = readl(micro->base + UTDR);
+ if (status & UTSR1_PRE)
+ dev_err(micro->dev, "rx: parity error\n");
+ else if (status & UTSR1_FRE)
+ dev_err(micro->dev, "rx: framing error\n");
+ else if (status & UTSR1_ROR)
+ dev_err(micro->dev, "rx: overrun error\n");
+ micro_process_char(micro, ch);
+ }
+}
+
+static void ipaq_micro_get_version(struct ipaq_micro *micro)
+{
+ struct ipaq_micro_msg msg = {
+ .id = MSG_VERSION,
+ };
+
+ ipaq_micro_tx_msg_sync(micro, &msg);
+ if (msg.rx_len == 4) {
+ memcpy(micro->version, msg.rx_data, 4);
+ micro->version[4] = '\0';
+ } else if (msg.rx_len == 9) {
+ memcpy(micro->version, msg.rx_data, 4);
+ micro->version[4] = '\0';
+ /* Bytes 4-7 are "pack", byte 8 is "boot type" */
+ } else {
+ dev_err(micro->dev,
+ "illegal version message %d bytes\n", msg.rx_len);
+ }
+}
+
+static void ipaq_micro_eeprom_read(struct ipaq_micro *micro,
+ u8 address, u8 len, u8 *data)
+{
+ struct ipaq_micro_msg msg = {
+ .id = MSG_EEPROM_READ,
+ };
+ u8 i;
+
+ for (i = 0; i < len; i++) {
+ msg.tx_data[0] = address + i;
+ msg.tx_data[1] = 1;
+ msg.tx_len = 2;
+ ipaq_micro_tx_msg_sync(micro, &msg);
+ memcpy(data + (i * 2), msg.rx_data, 2);
+ }
+}
+
+static char *ipaq_micro_str(u8 *wchar, u8 len)
+{
+ char retstr[256];
+ u8 i;
+
+ for (i = 0; i < len / 2; i++)
+ retstr[i] = wchar[i * 2];
+ return kstrdup(retstr, GFP_KERNEL);
+}
+
+static u16 ipaq_micro_to_u16(u8 *data)
+{
+ return data[1] << 8 | data[0];
+}
+
+static void ipaq_micro_eeprom_dump(struct ipaq_micro *micro)
+{
+ u8 dump[256];
+ char *str;
+
+ ipaq_micro_eeprom_read(micro, 0, 128, dump);
+ str = ipaq_micro_str(dump, 10);
+ if (str) {
+ dev_info(micro->dev, "HM version %s\n", str);
+ kfree(str);
+ }
+ str = ipaq_micro_str(dump+10, 40);
+ if (str) {
+ dev_info(micro->dev, "serial number: %s\n", str);
+ /* Feed the random pool with this */
+ add_device_randomness(str, strlen(str));
+ kfree(str);
+ }
+ str = ipaq_micro_str(dump+50, 20);
+ if (str) {
+ dev_info(micro->dev, "module ID: %s\n", str);
+ kfree(str);
+ }
+ str = ipaq_micro_str(dump+70, 10);
+ if (str) {
+ dev_info(micro->dev, "product revision: %s\n", str);
+ kfree(str);
+ }
+ dev_info(micro->dev, "product ID: %u\n", ipaq_micro_to_u16(dump+80));
+ dev_info(micro->dev, "frame rate: %u fps\n",
+ ipaq_micro_to_u16(dump+82));
+ dev_info(micro->dev, "page mode: %u\n", ipaq_micro_to_u16(dump+84));
+ dev_info(micro->dev, "country ID: %u\n", ipaq_micro_to_u16(dump+86));
+ dev_info(micro->dev, "color display: %s\n",
+ ipaq_micro_to_u16(dump+88) ? "yes" : "no");
+ dev_info(micro->dev, "ROM size: %u MiB\n", ipaq_micro_to_u16(dump+90));
+ dev_info(micro->dev, "RAM size: %u KiB\n", ipaq_micro_to_u16(dump+92));
+ dev_info(micro->dev, "screen: %u x %u\n",
+ ipaq_micro_to_u16(dump+94), ipaq_micro_to_u16(dump+96));
+ print_hex_dump(KERN_DEBUG, "eeprom: ", DUMP_PREFIX_OFFSET, 16, 1,
+ dump, 256, true);
+
+}
+
+static void micro_tx_chars(struct ipaq_micro *micro)
+{
+ struct ipaq_micro_txdev *tx = &micro->tx;
+ u32 val;
+
+ while ((tx->index < tx->len) &&
+ (readl(micro->base + UTSR1) & UTSR1_TNF)) {
+ writel(tx->buf[tx->index], micro->base + UTDR);
+ tx->index++;
+ }
+
+ /* Stop interrupts */
+ val = readl(micro->base + UTCR3);
+ val &= ~UTCR3_TIE;
+ writel(val, micro->base + UTCR3);
+}
+
+static void micro_reset_comm(struct ipaq_micro *micro)
+{
+ struct ipaq_micro_rxdev *rx = &micro->rx;
+ u32 val;
+
+ if (micro->msg)
+ complete(&micro->msg->ack);
+
+ /* Initialize Serial channel protocol frame */
+ rx->state = STATE_SOF; /* Reset the state machine */
+
+ /* Set up interrupts */
+ writel(0x01, micro->sdlc + 0x0); /* Select UART mode */
+
+ /* Clean up CR3 */
+ writel(0x0, micro->base + UTCR3);
+
+ /* Format: 8N1 */
+ writel(UTCR0_8BitData | UTCR0_1StpBit, micro->base + UTCR0);
+
+ /* Baud rate: 115200 */
+ writel(0x0, micro->base + UTCR1);
+ writel(0x1, micro->base + UTCR2);
+
+ /* Clear SR0 */
+ writel(0xff, micro->base + UTSR0);
+
+ /* Enable RX int, disable TX int */
+ writel(UTCR3_TXE | UTCR3_RXE | UTCR3_RIE, micro->base + UTCR3);
+ val = readl(micro->base + UTCR3);
+ val &= ~UTCR3_TIE;
+ writel(val, micro->base + UTCR3);
+}
+
+static irqreturn_t micro_serial_isr(int irq, void *dev_id)
+{
+ struct ipaq_micro *micro = dev_id;
+ struct ipaq_micro_txdev *tx = &micro->tx;
+ u32 status;
+
+ status = readl(micro->base + UTSR0);
+ do {
+ if (status & (UTSR0_RID | UTSR0_RFS)) {
+ if (status & UTSR0_RID)
+ /* Clear the Receiver IDLE bit */
+ writel(UTSR0_RID, micro->base + UTSR0);
+ micro_rx_chars(micro);
+ }
+
+ /* Clear break bits */
+ if (status & (UTSR0_RBB | UTSR0_REB))
+ writel(status & (UTSR0_RBB | UTSR0_REB),
+ micro->base + UTSR0);
+
+ if (status & UTSR0_TFS)
+ micro_tx_chars(micro);
+
+ status = readl(micro->base + UTSR0);
+
+ } while (((tx->index < tx->len) && (status & UTSR0_TFS)) ||
+ (status & (UTSR0_RFS | UTSR0_RID)));
+
+ return IRQ_HANDLED;
+}
+
+static const struct mfd_cell micro_cells[] = {
+ { .name = "ipaq-micro-backlight", },
+ { .name = "ipaq-micro-battery", },
+ { .name = "ipaq-micro-keys", },
+ { .name = "ipaq-micro-ts", },
+ { .name = "ipaq-micro-leds", },
+};
+
+static int micro_resume(struct device *dev)
+{
+ struct ipaq_micro *micro = dev_get_drvdata(dev);
+
+ micro_reset_comm(micro);
+ mdelay(10);
+
+ return 0;
+}
+
+static int micro_probe(struct platform_device *pdev)
+{
+ struct ipaq_micro *micro;
+ struct resource *res;
+ int ret;
+ int irq;
+
+ micro = devm_kzalloc(&pdev->dev, sizeof(*micro), GFP_KERNEL);
+ if (!micro)
+ return -ENOMEM;
+
+ micro->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+
+ micro->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(micro->base))
+ return PTR_ERR(micro->base);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res)
+ return -EINVAL;
+
+ micro->sdlc = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(micro->sdlc))
+ return PTR_ERR(micro->sdlc);
+
+ micro_reset_comm(micro);
+
+ irq = platform_get_irq(pdev, 0);
+ if (!irq)
+ return -EINVAL;
+ ret = devm_request_irq(&pdev->dev, irq, micro_serial_isr,
+ IRQF_SHARED, "ipaq-micro",
+ micro);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to grab serial port IRQ\n");
+ return ret;
+ } else
+ dev_info(&pdev->dev, "grabbed serial port IRQ\n");
+
+ spin_lock_init(&micro->lock);
+ INIT_LIST_HEAD(&micro->queue);
+ platform_set_drvdata(pdev, micro);
+
+ ret = mfd_add_devices(&pdev->dev, pdev->id, micro_cells,
+ ARRAY_SIZE(micro_cells), NULL, 0, NULL);
+ if (ret) {
+ dev_err(&pdev->dev, "error adding MFD cells");
+ return ret;
+ }
+
+ /* Check version */
+ ipaq_micro_get_version(micro);
+ dev_info(&pdev->dev, "Atmel micro ASIC version %s\n", micro->version);
+ ipaq_micro_eeprom_dump(micro);
+
+ return 0;
+}
+
+static int micro_remove(struct platform_device *pdev)
+{
+ struct ipaq_micro *micro = platform_get_drvdata(pdev);
+ u32 val;
+
+ mfd_remove_devices(&pdev->dev);
+
+ val = readl(micro->base + UTCR3);
+ val &= ~(UTCR3_RXE | UTCR3_RIE); /* disable receive interrupt */
+ val &= ~(UTCR3_TXE | UTCR3_TIE); /* disable transmit interrupt */
+ writel(val, micro->base + UTCR3);
+
+ return 0;
+}
+
+static const struct dev_pm_ops micro_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(NULL, micro_resume)
+};
+
+static struct platform_driver micro_device_driver = {
+ .driver = {
+ .name = "ipaq-h3xxx-micro",
+ .pm = &micro_dev_pm_ops,
+ },
+ .probe = micro_probe,
+ .remove = micro_remove,
+ /* .shutdown = micro_suspend, // FIXME */
+};
+module_platform_driver(micro_device_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("driver for iPAQ Atmel micro core and backlight");
diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
index 07692604e119..f7ff0188603d 100644
--- a/drivers/mfd/kempld-core.c
+++ b/drivers/mfd/kempld-core.c
@@ -86,7 +86,7 @@ enum kempld_cells {
KEMPLD_UART,
};
-static struct mfd_cell kempld_devs[] = {
+static const struct mfd_cell kempld_devs[] = {
[KEMPLD_I2C] = {
.name = "kempld-i2c",
},
@@ -288,9 +288,38 @@ EXPORT_SYMBOL_GPL(kempld_release_mutex);
*/
static int kempld_get_info(struct kempld_device_data *pld)
{
+ int ret;
struct kempld_platform_data *pdata = dev_get_platdata(pld->dev);
+ char major, minor;
+
+ ret = pdata->get_info(pld);
+ if (ret)
+ return ret;
+
+ /* The Kontron PLD firmware version string has the following format:
+ * Pwxy.zzzz
+ * P: Fixed
+ * w: PLD number - 1 hex digit
+ * x: Major version - 1 alphanumerical digit (0-9A-V)
+ * y: Minor version - 1 alphanumerical digit (0-9A-V)
+ * zzzz: Build number - 4 zero padded hex digits */
- return pdata->get_info(pld);
+ if (pld->info.major < 10)
+ major = pld->info.major + '0';
+ else
+ major = (pld->info.major - 10) + 'A';
+ if (pld->info.minor < 10)
+ minor = pld->info.minor + '0';
+ else
+ minor = (pld->info.minor - 10) + 'A';
+
+ ret = scnprintf(pld->info.version, sizeof(pld->info.version),
+ "P%X%c%c.%04X", pld->info.number, major, minor,
+ pld->info.buildnr);
+ if (ret < 0)
+ return ret;
+
+ return 0;
}
/*
@@ -307,9 +336,71 @@ static int kempld_register_cells(struct kempld_device_data *pld)
return pdata->register_cells(pld);
}
+static const char *kempld_get_type_string(struct kempld_device_data *pld)
+{
+ const char *version_type;
+
+ switch (pld->info.type) {
+ case 0:
+ version_type = "release";
+ break;
+ case 1:
+ version_type = "debug";
+ break;
+ case 2:
+ version_type = "custom";
+ break;
+ default:
+ version_type = "unspecified";
+ break;
+ }
+
+ return version_type;
+}
+
+static ssize_t kempld_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct kempld_device_data *pld = dev_get_drvdata(dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%s\n", pld->info.version);
+}
+
+static ssize_t kempld_specification_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct kempld_device_data *pld = dev_get_drvdata(dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%d.%d\n", pld->info.spec_major,
+ pld->info.spec_minor);
+}
+
+static ssize_t kempld_type_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct kempld_device_data *pld = dev_get_drvdata(dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%s\n", kempld_get_type_string(pld));
+}
+
+static DEVICE_ATTR(pld_version, S_IRUGO, kempld_version_show, NULL);
+static DEVICE_ATTR(pld_specification, S_IRUGO, kempld_specification_show,
+ NULL);
+static DEVICE_ATTR(pld_type, S_IRUGO, kempld_type_show, NULL);
+
+static struct attribute *pld_attributes[] = {
+ &dev_attr_pld_version.attr,
+ &dev_attr_pld_specification.attr,
+ &dev_attr_pld_type.attr,
+ NULL
+};
+
+static const struct attribute_group pld_attr_group = {
+ .attrs = pld_attributes,
+};
+
static int kempld_detect_device(struct kempld_device_data *pld)
{
- char *version_type;
u8 index_reg;
int ret;
@@ -335,27 +426,19 @@ static int kempld_detect_device(struct kempld_device_data *pld)
if (ret)
return ret;
- switch (pld->info.type) {
- case 0:
- version_type = "release";
- break;
- case 1:
- version_type = "debug";
- break;
- case 2:
- version_type = "custom";
- break;
- default:
- version_type = "unspecified";
- }
+ dev_info(pld->dev, "Found Kontron PLD - %s (%s), spec %d.%d\n",
+ pld->info.version, kempld_get_type_string(pld),
+ pld->info.spec_major, pld->info.spec_minor);
+
+ ret = sysfs_create_group(&pld->dev->kobj, &pld_attr_group);
+ if (ret)
+ return ret;
- dev_info(pld->dev, "Found Kontron PLD %d\n", pld->info.number);
- dev_info(pld->dev, "%s version %d.%d build %d, specification %d.%d\n",
- version_type, pld->info.major, pld->info.minor,
- pld->info.buildnr, pld->info.spec_major,
- pld->info.spec_minor);
+ ret = kempld_register_cells(pld);
+ if (ret)
+ sysfs_remove_group(&pld->dev->kobj, &pld_attr_group);
- return kempld_register_cells(pld);
+ return ret;
}
static int kempld_probe(struct platform_device *pdev)
@@ -399,6 +482,8 @@ static int kempld_remove(struct platform_device *pdev)
struct kempld_device_data *pld = platform_get_drvdata(pdev);
struct kempld_platform_data *pdata = dev_get_platdata(pld->dev);
+ sysfs_remove_group(&pld->dev->kobj, &pld_attr_group);
+
mfd_remove_devices(&pdev->dev);
pdata->release_hardware_mutex(pld);
diff --git a/drivers/mfd/lp3943.c b/drivers/mfd/lp3943.c
index e32226836fb4..335b930112b2 100644
--- a/drivers/mfd/lp3943.c
+++ b/drivers/mfd/lp3943.c
@@ -62,7 +62,7 @@ static const struct lp3943_reg_cfg lp3943_mux_cfg[] = {
{ LP3943_REG_MUX3, 0xC0, 6 },
};
-static struct mfd_cell lp3943_devs[] = {
+static const struct mfd_cell lp3943_devs[] = {
{
.name = "lp3943-pwm",
.of_compatible = "ti,lp3943-pwm",
diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c
index 3f10ea3f45d1..7d8482ff5868 100644
--- a/drivers/mfd/lpc_ich.c
+++ b/drivers/mfd/lpc_ich.c
@@ -488,6 +488,7 @@ static struct lpc_ich_info lpc_chipset_info[] = {
[LPC_PPT] = {
.name = "Panther Point",
.iTCO_version = 2,
+ .gpio_version = ICH_V5_GPIO,
},
[LPC_LPT] = {
.name = "Lynx Point",
diff --git a/drivers/mfd/max14577.c b/drivers/mfd/max14577.c
index 484d372a4892..4a5e885383f8 100644
--- a/drivers/mfd/max14577.c
+++ b/drivers/mfd/max14577.c
@@ -26,7 +26,7 @@
#include <linux/mfd/max14577.h>
#include <linux/mfd/max14577-private.h>
-static struct mfd_cell max14577_devs[] = {
+static const struct mfd_cell max14577_devs[] = {
{
.name = "max14577-muic",
.of_compatible = "maxim,max14577-muic",
@@ -38,7 +38,7 @@ static struct mfd_cell max14577_devs[] = {
{ .name = "max14577-charger", },
};
-static struct mfd_cell max77836_devs[] = {
+static const struct mfd_cell max77836_devs[] = {
{
.name = "max77836-muic",
.of_compatible = "maxim,max77836-muic",
@@ -57,7 +57,7 @@ static struct mfd_cell max77836_devs[] = {
},
};
-static struct of_device_id max14577_dt_match[] = {
+static const struct of_device_id max14577_dt_match[] = {
{
.compatible = "maxim,max14577",
.data = (void *)MAXIM_DEVICE_TYPE_MAX14577,
@@ -292,7 +292,7 @@ static int max14577_i2c_probe(struct i2c_client *i2c,
struct device_node *np = i2c->dev.of_node;
int ret = 0;
const struct regmap_irq_chip *irq_chip;
- struct mfd_cell *mfd_devs;
+ const struct mfd_cell *mfd_devs;
unsigned int mfd_devs_size;
int irq_flags;
@@ -331,7 +331,8 @@ static int max14577_i2c_probe(struct i2c_client *i2c,
of_id = of_match_device(max14577_dt_match, &i2c->dev);
if (of_id)
- max14577->dev_type = (unsigned int)of_id->data;
+ max14577->dev_type =
+ (enum maxim_device_type)of_id->data;
} else {
max14577->dev_type = id->driver_data;
}
@@ -414,20 +415,18 @@ static int max14577_suspend(struct device *dev)
struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
struct max14577 *max14577 = i2c_get_clientdata(i2c);
- if (device_may_wakeup(dev)) {
+ if (device_may_wakeup(dev))
enable_irq_wake(max14577->irq);
- /*
- * MUIC IRQ must be disabled during suspend if this is
- * a wake up source because it will be handled before
- * resuming I2C.
- *
- * When device is woken up from suspend (e.g. by ADC change),
- * an interrupt occurs before resuming I2C bus controller.
- * Interrupt handler tries to read registers but this read
- * will fail because I2C is still suspended.
- */
- disable_irq(max14577->irq);
- }
+ /*
+ * MUIC IRQ must be disabled during suspend because if it happens
+ * while suspended it will be handled before resuming I2C.
+ *
+ * When device is woken up from suspend (e.g. by ADC change),
+ * an interrupt occurs before resuming I2C bus controller.
+ * Interrupt handler tries to read registers but this read
+ * will fail because I2C is still suspended.
+ */
+ disable_irq(max14577->irq);
return 0;
}
@@ -437,10 +436,9 @@ static int max14577_resume(struct device *dev)
struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
struct max14577 *max14577 = i2c_get_clientdata(i2c);
- if (device_may_wakeup(dev)) {
+ if (device_may_wakeup(dev))
disable_irq_wake(max14577->irq);
- enable_irq(max14577->irq);
- }
+ enable_irq(max14577->irq);
return 0;
}
diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c
index e5fce765accb..ce869acf27ae 100644
--- a/drivers/mfd/max77686.c
+++ b/drivers/mfd/max77686.c
@@ -47,7 +47,7 @@ static struct regmap_config max77686_regmap_config = {
};
#ifdef CONFIG_OF
-static struct of_device_id max77686_pmic_dt_match[] = {
+static const struct of_device_id max77686_pmic_dt_match[] = {
{.compatible = "maxim,max77686", .data = NULL},
{},
};
diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c
index c5535f018466..7e05428c756d 100644
--- a/drivers/mfd/max77693.c
+++ b/drivers/mfd/max77693.c
@@ -243,7 +243,7 @@ static const struct dev_pm_ops max77693_pm = {
};
#ifdef CONFIG_OF
-static struct of_device_id max77693_dt_match[] = {
+static const struct of_device_id max77693_dt_match[] = {
{ .compatible = "maxim,max77693" },
{},
};
diff --git a/drivers/mfd/max8907.c b/drivers/mfd/max8907.c
index 07740314b29d..232749c8813d 100644
--- a/drivers/mfd/max8907.c
+++ b/drivers/mfd/max8907.c
@@ -305,7 +305,7 @@ static int max8907_i2c_remove(struct i2c_client *i2c)
}
#ifdef CONFIG_OF
-static struct of_device_id max8907_of_match[] = {
+static const struct of_device_id max8907_of_match[] = {
{ .compatible = "maxim,max8907" },
{ },
};
diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
index 8cf7a015cfe5..595364ee178a 100644
--- a/drivers/mfd/max8997.c
+++ b/drivers/mfd/max8997.c
@@ -51,7 +51,7 @@ static const struct mfd_cell max8997_devs[] = {
};
#ifdef CONFIG_OF
-static struct of_device_id max8997_pmic_dt_match[] = {
+static const struct of_device_id max8997_pmic_dt_match[] = {
{ .compatible = "maxim,max8997-pmic", .data = (void *)TYPE_MAX8997 },
{},
};
diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c
index 592db06098e6..a37cb7444b6e 100644
--- a/drivers/mfd/max8998.c
+++ b/drivers/mfd/max8998.c
@@ -132,7 +132,7 @@ int max8998_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask)
EXPORT_SYMBOL(max8998_update_reg);
#ifdef CONFIG_OF
-static struct of_device_id max8998_dt_match[] = {
+static const struct of_device_id max8998_dt_match[] = {
{ .compatible = "maxim,max8998", .data = (void *)TYPE_MAX8998 },
{ .compatible = "national,lp3974", .data = (void *)TYPE_LP3974 },
{ .compatible = "ti,lp3974", .data = (void *)TYPE_LP3974 },
diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c
index 0c6c21c5b1a8..acf5dd712eb2 100644
--- a/drivers/mfd/mc13xxx-core.c
+++ b/drivers/mfd/mc13xxx-core.c
@@ -660,34 +660,22 @@ int mc13xxx_common_init(struct device *dev)
if (ret)
return ret;
+ mutex_init(&mc13xxx->lock);
+
ret = request_threaded_irq(mc13xxx->irq, NULL, mc13xxx_irq_thread,
IRQF_ONESHOT | IRQF_TRIGGER_HIGH, "mc13xxx", mc13xxx);
if (ret)
return ret;
- mutex_init(&mc13xxx->lock);
-
if (mc13xxx_probe_flags_dt(mc13xxx) < 0 && pdata)
mc13xxx->flags = pdata->flags;
if (mc13xxx->flags & MC13XXX_USE_ADC)
mc13xxx_add_subdevice(mc13xxx, "%s-adc");
- if (mc13xxx->flags & MC13XXX_USE_CODEC) {
- if (pdata)
- mc13xxx_add_subdevice_pdata(mc13xxx, "%s-codec",
- pdata->codec, sizeof(*pdata->codec));
- else
- mc13xxx_add_subdevice(mc13xxx, "%s-codec");
- }
-
if (mc13xxx->flags & MC13XXX_USE_RTC)
mc13xxx_add_subdevice(mc13xxx, "%s-rtc");
- if (mc13xxx->flags & MC13XXX_USE_TOUCHSCREEN)
- mc13xxx_add_subdevice_pdata(mc13xxx, "%s-ts",
- &pdata->touch, sizeof(pdata->touch));
-
if (pdata) {
mc13xxx_add_subdevice_pdata(mc13xxx, "%s-regulator",
&pdata->regulators, sizeof(pdata->regulators));
@@ -695,10 +683,20 @@ int mc13xxx_common_init(struct device *dev)
pdata->leds, sizeof(*pdata->leds));
mc13xxx_add_subdevice_pdata(mc13xxx, "%s-pwrbutton",
pdata->buttons, sizeof(*pdata->buttons));
+ if (mc13xxx->flags & MC13XXX_USE_CODEC)
+ mc13xxx_add_subdevice_pdata(mc13xxx, "%s-codec",
+ pdata->codec, sizeof(*pdata->codec));
+ if (mc13xxx->flags & MC13XXX_USE_TOUCHSCREEN)
+ mc13xxx_add_subdevice_pdata(mc13xxx, "%s-ts",
+ &pdata->touch, sizeof(pdata->touch));
} else {
mc13xxx_add_subdevice(mc13xxx, "%s-regulator");
mc13xxx_add_subdevice(mc13xxx, "%s-led");
mc13xxx_add_subdevice(mc13xxx, "%s-pwrbutton");
+ if (mc13xxx->flags & MC13XXX_USE_CODEC)
+ mc13xxx_add_subdevice(mc13xxx, "%s-codec");
+ if (mc13xxx->flags & MC13XXX_USE_TOUCHSCREEN)
+ mc13xxx_add_subdevice(mc13xxx, "%s-ts");
}
return 0;
diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
index ad25bfa3fb02..5e2667afe2bc 100644
--- a/drivers/mfd/menelaus.c
+++ b/drivers/mfd/menelaus.c
@@ -1287,29 +1287,8 @@ static struct i2c_driver menelaus_i2c_driver = {
.id_table = menelaus_id,
};
-static int __init menelaus_init(void)
-{
- int res;
-
- res = i2c_add_driver(&menelaus_i2c_driver);
- if (res < 0) {
- pr_err(DRIVER_NAME ": driver registration failed\n");
- return res;
- }
-
- return 0;
-}
-
-static void __exit menelaus_exit(void)
-{
- i2c_del_driver(&menelaus_i2c_driver);
-
- /* FIXME: Shutdown menelaus parts that can be shut down */
-}
+module_i2c_driver(menelaus_i2c_driver);
MODULE_AUTHOR("Texas Instruments, Inc. (and others)");
MODULE_DESCRIPTION("I2C interface for Menelaus.");
MODULE_LICENSE("GPL");
-
-module_init(menelaus_init);
-module_exit(menelaus_exit);
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index 267649244737..892d343193ad 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -102,7 +102,7 @@ static int mfd_add_device(struct device *parent, int id,
pdev->dev.dma_mask = parent->dma_mask;
pdev->dev.dma_parms = parent->dma_parms;
- ret = devm_regulator_bulk_register_supply_alias(
+ ret = regulator_bulk_register_supply_alias(
&pdev->dev, cell->parent_supplies,
parent, cell->parent_supplies,
cell->num_parent_supplies);
@@ -182,9 +182,9 @@ static int mfd_add_device(struct device *parent, int id,
return 0;
fail_alias:
- devm_regulator_bulk_unregister_supply_alias(&pdev->dev,
- cell->parent_supplies,
- cell->num_parent_supplies);
+ regulator_bulk_unregister_supply_alias(&pdev->dev,
+ cell->parent_supplies,
+ cell->num_parent_supplies);
fail_res:
kfree(res);
fail_device:
@@ -238,6 +238,9 @@ static int mfd_remove_devices_fn(struct device *dev, void *c)
pdev = to_platform_device(dev);
cell = mfd_get_cell(pdev);
+ regulator_bulk_unregister_supply_alias(dev, cell->parent_supplies,
+ cell->num_parent_supplies);
+
/* find the base address of usage_count pointers (for freeing) */
if (!*usage_count || (cell->usage_count < *usage_count))
*usage_count = cell->usage_count;
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 651e249287dc..b48d80c367f9 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -557,7 +557,7 @@ static int usbhs_omap_get_dt_pdata(struct device *dev,
return 0;
}
-static struct of_device_id usbhs_child_match_table[] = {
+static const struct of_device_id usbhs_child_match_table[] = {
{ .compatible = "ti,omap-ehci", },
{ .compatible = "ti,omap-ohci", },
{ }
diff --git a/drivers/mfd/pm8921-core.c b/drivers/mfd/pm8921-core.c
index b97a97187ae9..959513803542 100644
--- a/drivers/mfd/pm8921-core.c
+++ b/drivers/mfd/pm8921-core.c
@@ -26,7 +26,6 @@
#include <linux/regmap.h>
#include <linux/of_platform.h>
#include <linux/mfd/core.h>
-#include <linux/mfd/pm8xxx/core.h>
#define SSBI_REG_ADDR_IRQ_BASE 0x1BB
@@ -57,7 +56,6 @@
#define PM8921_NR_IRQS 256
struct pm_irq_chip {
- struct device *dev;
struct regmap *regmap;
spinlock_t pm_irq_lock;
struct irq_domain *irqdomain;
@@ -67,11 +65,6 @@ struct pm_irq_chip {
u8 config[0];
};
-struct pm8921 {
- struct device *dev;
- struct pm_irq_chip *irq_chip;
-};
-
static int pm8xxx_read_block_irq(struct pm_irq_chip *chip, unsigned int bp,
unsigned int *ip)
{
@@ -255,55 +248,6 @@ static struct irq_chip pm8xxx_irq_chip = {
.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
};
-/**
- * pm8xxx_get_irq_stat - get the status of the irq line
- * @chip: pointer to identify a pmic irq controller
- * @irq: the irq number
- *
- * The pm8xxx gpio and mpp rely on the interrupt block to read
- * the values on their pins. This function is to facilitate reading
- * the status of a gpio or an mpp line. The caller has to convert the
- * gpio number to irq number.
- *
- * RETURNS:
- * an int indicating the value read on that line
- */
-static int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq)
-{
- int pmirq, rc;
- unsigned int block, bits, bit;
- unsigned long flags;
- struct irq_data *irq_data = irq_get_irq_data(irq);
-
- pmirq = irq_data->hwirq;
-
- block = pmirq / 8;
- bit = pmirq % 8;
-
- spin_lock_irqsave(&chip->pm_irq_lock, flags);
-
- rc = regmap_write(chip->regmap, SSBI_REG_ADDR_IRQ_BLK_SEL, block);
- if (rc) {
- pr_err("Failed Selecting block irq=%d pmirq=%d blk=%d rc=%d\n",
- irq, pmirq, block, rc);
- goto bail_out;
- }
-
- rc = regmap_read(chip->regmap, SSBI_REG_ADDR_IRQ_RT_STATUS, &bits);
- if (rc) {
- pr_err("Failed Configuring irq=%d pmirq=%d blk=%d rc=%d\n",
- irq, pmirq, block, rc);
- goto bail_out;
- }
-
- rc = (bits & (1 << bit)) ? 1 : 0;
-
-bail_out:
- spin_unlock_irqrestore(&chip->pm_irq_lock, flags);
-
- return rc;
-}
-
static int pm8xxx_irq_domain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hwirq)
{
@@ -324,56 +268,6 @@ static const struct irq_domain_ops pm8xxx_irq_domain_ops = {
.map = pm8xxx_irq_domain_map,
};
-static int pm8921_readb(const struct device *dev, u16 addr, u8 *val)
-{
- const struct pm8xxx_drvdata *pm8921_drvdata = dev_get_drvdata(dev);
- const struct pm8921 *pmic = pm8921_drvdata->pm_chip_data;
-
- return ssbi_read(pmic->dev->parent, addr, val, 1);
-}
-
-static int pm8921_writeb(const struct device *dev, u16 addr, u8 val)
-{
- const struct pm8xxx_drvdata *pm8921_drvdata = dev_get_drvdata(dev);
- const struct pm8921 *pmic = pm8921_drvdata->pm_chip_data;
-
- return ssbi_write(pmic->dev->parent, addr, &val, 1);
-}
-
-static int pm8921_read_buf(const struct device *dev, u16 addr, u8 *buf,
- int cnt)
-{
- const struct pm8xxx_drvdata *pm8921_drvdata = dev_get_drvdata(dev);
- const struct pm8921 *pmic = pm8921_drvdata->pm_chip_data;
-
- return ssbi_read(pmic->dev->parent, addr, buf, cnt);
-}
-
-static int pm8921_write_buf(const struct device *dev, u16 addr, u8 *buf,
- int cnt)
-{
- const struct pm8xxx_drvdata *pm8921_drvdata = dev_get_drvdata(dev);
- const struct pm8921 *pmic = pm8921_drvdata->pm_chip_data;
-
- return ssbi_write(pmic->dev->parent, addr, buf, cnt);
-}
-
-static int pm8921_read_irq_stat(const struct device *dev, int irq)
-{
- const struct pm8xxx_drvdata *pm8921_drvdata = dev_get_drvdata(dev);
- const struct pm8921 *pmic = pm8921_drvdata->pm_chip_data;
-
- return pm8xxx_get_irq_stat(pmic->irq_chip, irq);
-}
-
-static struct pm8xxx_drvdata pm8921_drvdata = {
- .pmic_readb = pm8921_readb,
- .pmic_writeb = pm8921_writeb,
- .pmic_read_buf = pm8921_read_buf,
- .pmic_write_buf = pm8921_write_buf,
- .pmic_read_irq_stat = pm8921_read_irq_stat,
-};
-
static const struct regmap_config ssbi_regmap_config = {
.reg_bits = 16,
.val_bits = 8,
@@ -392,7 +286,6 @@ MODULE_DEVICE_TABLE(of, pm8921_id_table);
static int pm8921_probe(struct platform_device *pdev)
{
- struct pm8921 *pmic;
struct regmap *regmap;
int irq, rc;
unsigned int val;
@@ -404,12 +297,6 @@ static int pm8921_probe(struct platform_device *pdev)
if (irq < 0)
return irq;
- pmic = devm_kzalloc(&pdev->dev, sizeof(struct pm8921), GFP_KERNEL);
- if (!pmic) {
- pr_err("Cannot alloc pm8921 struct\n");
- return -ENOMEM;
- }
-
regmap = devm_regmap_init(&pdev->dev, NULL, pdev->dev.parent,
&ssbi_regmap_config);
if (IS_ERR(regmap))
@@ -434,18 +321,13 @@ static int pm8921_probe(struct platform_device *pdev)
pr_info("PMIC revision 2: %02X\n", val);
rev |= val << BITS_PER_BYTE;
- pmic->dev = &pdev->dev;
- pm8921_drvdata.pm_chip_data = pmic;
- platform_set_drvdata(pdev, &pm8921_drvdata);
-
chip = devm_kzalloc(&pdev->dev, sizeof(*chip) +
sizeof(chip->config[0]) * nirqs,
GFP_KERNEL);
if (!chip)
return -ENOMEM;
- pmic->irq_chip = chip;
- chip->dev = &pdev->dev;
+ platform_set_drvdata(pdev, chip);
chip->regmap = regmap;
chip->num_irqs = nirqs;
chip->num_blocks = DIV_ROUND_UP(chip->num_irqs, 8);
@@ -481,8 +363,7 @@ static int pm8921_remove_child(struct device *dev, void *unused)
static int pm8921_remove(struct platform_device *pdev)
{
int irq = platform_get_irq(pdev, 0);
- struct pm8921 *pmic = pm8921_drvdata.pm_chip_data;
- struct pm_irq_chip *chip = pmic->irq_chip;
+ struct pm_irq_chip *chip = platform_get_drvdata(pdev);
device_for_each_child(&pdev->dev, NULL, pm8921_remove_child);
irq_set_chained_handler(irq, NULL);
diff --git a/drivers/mfd/rdc321x-southbridge.c b/drivers/mfd/rdc321x-southbridge.c
index c79569750be9..6575585f1d1f 100644
--- a/drivers/mfd/rdc321x-southbridge.c
+++ b/drivers/mfd/rdc321x-southbridge.c
@@ -38,7 +38,7 @@ static struct resource rdc321x_wdt_resource[] = {
};
static struct rdc321x_gpio_pdata rdc321x_gpio_pdata = {
- .max_gpios = RDC321X_MAX_GPIO,
+ .max_gpios = RDC321X_NUM_GPIO,
};
static struct resource rdc321x_gpio_resources[] = {
diff --git a/drivers/mfd/rtsx_usb.c b/drivers/mfd/rtsx_usb.c
index b53b9d46cc45..6352bec8419a 100644
--- a/drivers/mfd/rtsx_usb.c
+++ b/drivers/mfd/rtsx_usb.c
@@ -29,7 +29,7 @@ static int polling_pipe = 1;
module_param(polling_pipe, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(polling_pipe, "polling pipe (0: ctl, 1: bulk)");
-static struct mfd_cell rtsx_usb_cells[] = {
+static const struct mfd_cell rtsx_usb_cells[] = {
[RTSX_USB_SD_CARD] = {
.name = "rtsx_usb_sdmmc",
.pdata_size = 0,
@@ -67,7 +67,7 @@ static int rtsx_usb_bulk_transfer_sglist(struct rtsx_ucr *ucr,
ucr->sg_timer.expires = jiffies + msecs_to_jiffies(timeout);
add_timer(&ucr->sg_timer);
usb_sg_wait(&ucr->current_sg);
- del_timer(&ucr->sg_timer);
+ del_timer_sync(&ucr->sg_timer);
if (act_len)
*act_len = ucr->current_sg.bytes;
@@ -644,14 +644,14 @@ static int rtsx_usb_probe(struct usb_interface *intf,
if (ret)
goto out_init_fail;
+ /* initialize USB SG transfer timer */
+ setup_timer(&ucr->sg_timer, rtsx_usb_sg_timed_out, (unsigned long) ucr);
+
ret = mfd_add_devices(&intf->dev, usb_dev->devnum, rtsx_usb_cells,
ARRAY_SIZE(rtsx_usb_cells), NULL, 0, NULL);
if (ret)
goto out_init_fail;
- /* initialize USB SG transfer timer */
- init_timer(&ucr->sg_timer);
- setup_timer(&ucr->sg_timer, rtsx_usb_sg_timed_out, (unsigned long) ucr);
#ifdef CONFIG_PM
intf->needs_remote_wakeup = 1;
usb_enable_autosuspend(usb_dev);
@@ -687,9 +687,15 @@ static int rtsx_usb_suspend(struct usb_interface *intf, pm_message_t message)
dev_dbg(&intf->dev, "%s called with pm message 0x%04u\n",
__func__, message.event);
+ /*
+ * Call to make sure LED is off during suspend to save more power.
+ * It is NOT a permanent state and could be turned on anytime later.
+ * Thus no need to call turn_on when resunming.
+ */
mutex_lock(&ucr->dev_mutex);
rtsx_usb_turn_off_led(ucr);
mutex_unlock(&ucr->dev_mutex);
+
return 0;
}
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 1cf27521fff4..be06d0abbf19 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -25,7 +25,6 @@
#include <linux/mfd/core.h>
#include <linux/mfd/samsung/core.h>
#include <linux/mfd/samsung/irq.h>
-#include <linux/mfd/samsung/rtc.h>
#include <linux/mfd/samsung/s2mpa01.h>
#include <linux/mfd/samsung/s2mps11.h>
#include <linux/mfd/samsung/s2mps14.h>
@@ -91,7 +90,7 @@ static const struct mfd_cell s2mpa01_devs[] = {
};
#ifdef CONFIG_OF
-static struct of_device_id sec_dt_match[] = {
+static const struct of_device_id sec_dt_match[] = {
{ .compatible = "samsung,s5m8767-pmic",
.data = (void *)S5M8767X,
}, {
@@ -196,20 +195,6 @@ static const struct regmap_config s5m8767_regmap_config = {
.cache_type = REGCACHE_FLAT,
};
-static const struct regmap_config s5m_rtc_regmap_config = {
- .reg_bits = 8,
- .val_bits = 8,
-
- .max_register = SEC_RTC_REG_MAX,
-};
-
-static const struct regmap_config s2mps14_rtc_regmap_config = {
- .reg_bits = 8,
- .val_bits = 8,
-
- .max_register = S2MPS_RTC_REG_MAX,
-};
-
#ifdef CONFIG_OF
/*
* Only the common platform data elements for s5m8767 are parsed here from the
@@ -264,8 +249,9 @@ static int sec_pmic_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct sec_platform_data *pdata = dev_get_platdata(&i2c->dev);
- const struct regmap_config *regmap, *regmap_rtc;
+ const struct regmap_config *regmap;
struct sec_pmic_dev *sec_pmic;
+ unsigned long device_type;
int ret;
sec_pmic = devm_kzalloc(&i2c->dev, sizeof(struct sec_pmic_dev),
@@ -277,7 +263,7 @@ static int sec_pmic_probe(struct i2c_client *i2c,
sec_pmic->dev = &i2c->dev;
sec_pmic->i2c = i2c;
sec_pmic->irq = i2c->irq;
- sec_pmic->type = sec_i2c_get_driver_data(i2c, id);
+ device_type = sec_i2c_get_driver_data(i2c, id);
if (sec_pmic->dev->of_node) {
pdata = sec_pmic_i2c_parse_dt_pdata(sec_pmic->dev);
@@ -285,7 +271,7 @@ static int sec_pmic_probe(struct i2c_client *i2c,
ret = PTR_ERR(pdata);
return ret;
}
- pdata->device_type = sec_pmic->type;
+ pdata->device_type = device_type;
}
if (pdata) {
sec_pmic->device_type = pdata->device_type;
@@ -298,39 +284,21 @@ static int sec_pmic_probe(struct i2c_client *i2c,
switch (sec_pmic->device_type) {
case S2MPA01:
regmap = &s2mpa01_regmap_config;
- /*
- * The rtc-s5m driver does not support S2MPA01 and there
- * is no mfd_cell for S2MPA01 RTC device.
- * However we must pass something to devm_regmap_init_i2c()
- * so use S5M-like regmap config even though it wouldn't work.
- */
- regmap_rtc = &s5m_rtc_regmap_config;
break;
case S2MPS11X:
regmap = &s2mps11_regmap_config;
- /*
- * The rtc-s5m driver does not support S2MPS11 and there
- * is no mfd_cell for S2MPS11 RTC device.
- * However we must pass something to devm_regmap_init_i2c()
- * so use S5M-like regmap config even though it wouldn't work.
- */
- regmap_rtc = &s5m_rtc_regmap_config;
break;
case S2MPS14X:
regmap = &s2mps14_regmap_config;
- regmap_rtc = &s2mps14_rtc_regmap_config;
break;
case S5M8763X:
regmap = &s5m8763_regmap_config;
- regmap_rtc = &s5m_rtc_regmap_config;
break;
case S5M8767X:
regmap = &s5m8767_regmap_config;
- regmap_rtc = &s5m_rtc_regmap_config;
break;
default:
regmap = &sec_regmap_config;
- regmap_rtc = &s5m_rtc_regmap_config;
break;
}
@@ -342,21 +310,6 @@ static int sec_pmic_probe(struct i2c_client *i2c,
return ret;
}
- sec_pmic->rtc = i2c_new_dummy(i2c->adapter, RTC_I2C_ADDR);
- if (!sec_pmic->rtc) {
- dev_err(&i2c->dev, "Failed to allocate I2C for RTC\n");
- return -ENODEV;
- }
- i2c_set_clientdata(sec_pmic->rtc, sec_pmic);
-
- sec_pmic->regmap_rtc = devm_regmap_init_i2c(sec_pmic->rtc, regmap_rtc);
- if (IS_ERR(sec_pmic->regmap_rtc)) {
- ret = PTR_ERR(sec_pmic->regmap_rtc);
- dev_err(&i2c->dev, "Failed to allocate RTC register map: %d\n",
- ret);
- goto err_regmap_rtc;
- }
-
if (pdata && pdata->cfg_pmic_irq)
pdata->cfg_pmic_irq();
@@ -403,8 +356,6 @@ static int sec_pmic_probe(struct i2c_client *i2c,
err_mfd:
sec_irq_exit(sec_pmic);
-err_regmap_rtc:
- i2c_unregister_device(sec_pmic->rtc);
return ret;
}
@@ -414,7 +365,6 @@ static int sec_pmic_remove(struct i2c_client *i2c)
mfd_remove_devices(sec_pmic->dev);
sec_irq_exit(sec_pmic);
- i2c_unregister_device(sec_pmic->rtc);
return 0;
}
@@ -424,19 +374,18 @@ static int sec_pmic_suspend(struct device *dev)
struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c);
- if (device_may_wakeup(dev)) {
+ if (device_may_wakeup(dev))
enable_irq_wake(sec_pmic->irq);
- /*
- * PMIC IRQ must be disabled during suspend for RTC alarm
- * to work properly.
- * When device is woken up from suspend by RTC Alarm, an
- * interrupt occurs before resuming I2C bus controller.
- * The interrupt is handled by regmap_irq_thread which tries
- * to read RTC registers. This read fails (I2C is still
- * suspended) and RTC Alarm interrupt is disabled.
- */
- disable_irq(sec_pmic->irq);
- }
+ /*
+ * PMIC IRQ must be disabled during suspend for RTC alarm
+ * to work properly.
+ * When device is woken up from suspend, an
+ * interrupt occurs before resuming I2C bus controller.
+ * The interrupt is handled by regmap_irq_thread which tries
+ * to read RTC registers. This read fails (I2C is still
+ * suspended) and RTC Alarm interrupt is disabled.
+ */
+ disable_irq(sec_pmic->irq);
return 0;
}
@@ -446,10 +395,9 @@ static int sec_pmic_resume(struct device *dev)
struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c);
- if (device_may_wakeup(dev)) {
+ if (device_may_wakeup(dev))
disable_irq_wake(sec_pmic->irq);
- enable_irq(sec_pmic->irq);
- }
+ enable_irq(sec_pmic->irq);
return 0;
}
diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index 64e7913aadc6..654e2c1dbf7a 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -385,7 +385,7 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
&sec_pmic->irq_data);
break;
default:
- dev_err(sec_pmic->dev, "Unknown device type %d\n",
+ dev_err(sec_pmic->dev, "Unknown device type %lu\n",
sec_pmic->device_type);
return -EINVAL;
}
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index e7dc441a8f8a..81e6d0932bf0 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -1726,7 +1726,7 @@ static struct pci_driver sm501_pci_driver = {
MODULE_ALIAS("platform:sm501");
-static struct of_device_id of_sm501_match_tbl[] = {
+static const struct of_device_id of_sm501_match_tbl[] = {
{ .compatible = "smi,sm501", },
{ /* end */ }
};
diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c
index 0da02e11d58e..a45f9c0a330a 100644
--- a/drivers/mfd/stmpe-i2c.c
+++ b/drivers/mfd/stmpe-i2c.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/of_device.h>
#include "stmpe.h"
static int i2c_reg_read(struct stmpe *stmpe, u8 reg)
@@ -52,15 +53,41 @@ static struct stmpe_client_info i2c_ci = {
.write_block = i2c_block_write,
};
+static const struct of_device_id stmpe_of_match[] = {
+ { .compatible = "st,stmpe610", .data = (void *)STMPE610, },
+ { .compatible = "st,stmpe801", .data = (void *)STMPE801, },
+ { .compatible = "st,stmpe811", .data = (void *)STMPE811, },
+ { .compatible = "st,stmpe1601", .data = (void *)STMPE1601, },
+ { .compatible = "st,stmpe1801", .data = (void *)STMPE1801, },
+ { .compatible = "st,stmpe2401", .data = (void *)STMPE2401, },
+ { .compatible = "st,stmpe2403", .data = (void *)STMPE2403, },
+ {},
+};
+MODULE_DEVICE_TABLE(of, stmpe_of_match);
+
static int
stmpe_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
{
+ int partnum;
+ const struct of_device_id *of_id;
+
i2c_ci.data = (void *)id;
i2c_ci.irq = i2c->irq;
i2c_ci.client = i2c;
i2c_ci.dev = &i2c->dev;
- return stmpe_probe(&i2c_ci, id->driver_data);
+ of_id = of_match_device(stmpe_of_match, &i2c->dev);
+ if (!of_id) {
+ /*
+ * This happens when the I2C ID matches the node name
+ * but no real compatible string has been given.
+ */
+ dev_info(&i2c->dev, "matching on node name, compatible is preferred\n");
+ partnum = id->driver_data;
+ } else
+ partnum = (int)of_id->data;
+
+ return stmpe_probe(&i2c_ci, partnum);
}
static int stmpe_i2c_remove(struct i2c_client *i2c)
@@ -89,6 +116,7 @@ static struct i2c_driver stmpe_i2c_driver = {
#ifdef CONFIG_PM
.pm = &stmpe_dev_pm_ops,
#endif
+ .of_match_table = stmpe_of_match,
},
.probe = stmpe_i2c_probe,
.remove = stmpe_i2c_remove,
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 4a91f6771fb8..3b6bfa7184ad 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -20,6 +20,7 @@
#include <linux/slab.h>
#include <linux/mfd/core.h>
#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
#include "stmpe.h"
static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
@@ -605,9 +606,18 @@ static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks,
if (blocks & STMPE_BLOCK_GPIO)
mask |= STMPE1601_SYS_CTRL_ENABLE_GPIO;
+ else
+ mask &= ~STMPE1601_SYS_CTRL_ENABLE_GPIO;
if (blocks & STMPE_BLOCK_KEYPAD)
mask |= STMPE1601_SYS_CTRL_ENABLE_KPC;
+ else
+ mask &= ~STMPE1601_SYS_CTRL_ENABLE_KPC;
+
+ if (blocks & STMPE_BLOCK_PWM)
+ mask |= STMPE1601_SYS_CTRL_ENABLE_SPWM;
+ else
+ mask &= ~STMPE1601_SYS_CTRL_ENABLE_SPWM;
return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL, mask,
enable ? mask : 0);
@@ -986,9 +996,6 @@ static int stmpe_irq_init(struct stmpe *stmpe, struct device_node *np)
int base = 0;
int num_irqs = stmpe->variant->num_irqs;
- if (!np)
- base = stmpe->irq_base;
-
stmpe->domain = irq_domain_add_simple(np, num_irqs, base,
&stmpe_irq_ops, stmpe);
if (!stmpe->domain) {
@@ -1067,7 +1074,7 @@ static int stmpe_chip_init(struct stmpe *stmpe)
static int stmpe_add_device(struct stmpe *stmpe, const struct mfd_cell *cell)
{
return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1,
- NULL, stmpe->irq_base, stmpe->domain);
+ NULL, 0, stmpe->domain);
}
static int stmpe_devices_init(struct stmpe *stmpe)
@@ -1171,12 +1178,23 @@ int stmpe_probe(struct stmpe_client_info *ci, int partnum)
stmpe->dev = ci->dev;
stmpe->client = ci->client;
stmpe->pdata = pdata;
- stmpe->irq_base = pdata->irq_base;
stmpe->ci = ci;
stmpe->partnum = partnum;
stmpe->variant = stmpe_variant_info[partnum];
stmpe->regs = stmpe->variant->regs;
stmpe->num_gpios = stmpe->variant->num_gpios;
+ stmpe->vcc = devm_regulator_get_optional(ci->dev, "vcc");
+ if (!IS_ERR(stmpe->vcc)) {
+ ret = regulator_enable(stmpe->vcc);
+ if (ret)
+ dev_warn(ci->dev, "failed to enable VCC supply\n");
+ }
+ stmpe->vio = devm_regulator_get_optional(ci->dev, "vio");
+ if (!IS_ERR(stmpe->vio)) {
+ ret = regulator_enable(stmpe->vio);
+ if (ret)
+ dev_warn(ci->dev, "failed to enable VIO supply\n");
+ }
dev_set_drvdata(stmpe->dev, stmpe);
if (ci->init)
@@ -1243,6 +1261,11 @@ int stmpe_probe(struct stmpe_client_info *ci, int partnum)
int stmpe_remove(struct stmpe *stmpe)
{
+ if (!IS_ERR(stmpe->vio))
+ regulator_disable(stmpe->vio);
+ if (!IS_ERR(stmpe->vcc))
+ regulator_disable(stmpe->vcc);
+
mfd_remove_devices(stmpe->dev);
return 0;
diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
index 6639f1b0fef5..9e4d21d37a11 100644
--- a/drivers/mfd/stmpe.h
+++ b/drivers/mfd/stmpe.h
@@ -192,7 +192,7 @@ int stmpe_remove(struct stmpe *stmpe);
#define STMPE1601_SYS_CTRL_ENABLE_GPIO (1 << 3)
#define STMPE1601_SYS_CTRL_ENABLE_KPC (1 << 1)
-#define STMPE1601_SYSCON_ENABLE_SPWM (1 << 0)
+#define STMPE1601_SYS_CTRL_ENABLE_SPWM (1 << 0)
/* The 1601/2403 share the same masks */
#define STMPE1601_AUTOSLEEP_TIMEOUT_MASK (0x7)
diff --git a/drivers/mfd/sun6i-prcm.c b/drivers/mfd/sun6i-prcm.c
new file mode 100644
index 000000000000..718fc4d2adc0
--- /dev/null
+++ b/drivers/mfd/sun6i-prcm.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2014 Free Electrons
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
+ *
+ * Allwinner PRCM (Power/Reset/Clock Management) driver
+ *
+ */
+
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+struct prcm_data {
+ int nsubdevs;
+ const struct mfd_cell *subdevs;
+};
+
+static const struct resource sun6i_a31_ar100_clk_res[] = {
+ {
+ .start = 0x0,
+ .end = 0x3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static const struct resource sun6i_a31_apb0_clk_res[] = {
+ {
+ .start = 0xc,
+ .end = 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static const struct resource sun6i_a31_apb0_gates_clk_res[] = {
+ {
+ .start = 0x28,
+ .end = 0x2b,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static const struct resource sun6i_a31_apb0_rstc_res[] = {
+ {
+ .start = 0xb0,
+ .end = 0xb3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static const struct mfd_cell sun6i_a31_prcm_subdevs[] = {
+ {
+ .name = "sun6i-a31-ar100-clk",
+ .of_compatible = "allwinner,sun6i-a31-ar100-clk",
+ .num_resources = ARRAY_SIZE(sun6i_a31_ar100_clk_res),
+ .resources = sun6i_a31_ar100_clk_res,
+ },
+ {
+ .name = "sun6i-a31-apb0-clk",
+ .of_compatible = "allwinner,sun6i-a31-apb0-clk",
+ .num_resources = ARRAY_SIZE(sun6i_a31_apb0_clk_res),
+ .resources = sun6i_a31_apb0_clk_res,
+ },
+ {
+ .name = "sun6i-a31-apb0-gates-clk",
+ .of_compatible = "allwinner,sun6i-a31-apb0-gates-clk",
+ .num_resources = ARRAY_SIZE(sun6i_a31_apb0_gates_clk_res),
+ .resources = sun6i_a31_apb0_gates_clk_res,
+ },
+ {
+ .name = "sun6i-a31-apb0-clock-reset",
+ .of_compatible = "allwinner,sun6i-a31-clock-reset",
+ .num_resources = ARRAY_SIZE(sun6i_a31_apb0_rstc_res),
+ .resources = sun6i_a31_apb0_rstc_res,
+ },
+};
+
+static const struct prcm_data sun6i_a31_prcm_data = {
+ .nsubdevs = ARRAY_SIZE(sun6i_a31_prcm_subdevs),
+ .subdevs = sun6i_a31_prcm_subdevs,
+};
+
+static const struct of_device_id sun6i_prcm_dt_ids[] = {
+ {
+ .compatible = "allwinner,sun6i-a31-prcm",
+ .data = &sun6i_a31_prcm_data,
+ },
+ { /* sentinel */ },
+};
+
+static int sun6i_prcm_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *match;
+ const struct prcm_data *data;
+ struct resource *res;
+ int ret;
+
+ match = of_match_node(sun6i_prcm_dt_ids, np);
+ if (!match)
+ return -EINVAL;
+
+ data = match->data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "no prcm memory region provided\n");
+ return -ENOENT;
+ }
+
+ ret = mfd_add_devices(&pdev->dev, 0, data->subdevs, data->nsubdevs,
+ res, -1, NULL);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add subdevices\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct platform_driver sun6i_prcm_driver = {
+ .driver = {
+ .name = "sun6i-prcm",
+ .owner = THIS_MODULE,
+ .of_match_table = sun6i_prcm_dt_ids,
+ },
+ .probe = sun6i_prcm_probe,
+};
+module_platform_driver(sun6i_prcm_driver);
+
+MODULE_AUTHOR("Boris BREZILLON <boris.brezillon@free-electrons.com>");
+MODULE_DESCRIPTION("Allwinner sun6i PRCM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index e2a04bb8bc1e..ca15878ce5c0 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -95,7 +95,11 @@ struct regmap *syscon_regmap_lookup_by_phandle(struct device_node *np,
struct device_node *syscon_np;
struct regmap *regmap;
- syscon_np = of_parse_phandle(np, property, 0);
+ if (property)
+ syscon_np = of_parse_phandle(np, property, 0);
+ else
+ syscon_np = np;
+
if (!syscon_np)
return ERR_PTR(-ENODEV);
diff --git a/drivers/mfd/tps6507x.c b/drivers/mfd/tps6507x.c
index 3b27482a174f..a2e1990c9de7 100644
--- a/drivers/mfd/tps6507x.c
+++ b/drivers/mfd/tps6507x.c
@@ -119,7 +119,7 @@ static const struct i2c_device_id tps6507x_i2c_id[] = {
MODULE_DEVICE_TABLE(i2c, tps6507x_i2c_id);
#ifdef CONFIG_OF
-static struct of_device_id tps6507x_of_match[] = {
+static const struct of_device_id tps6507x_of_match[] = {
{.compatible = "ti,tps6507x", },
{},
};
diff --git a/drivers/mfd/tps65218.c b/drivers/mfd/tps65218.c
index a74bfb59f18f..0d256cb002eb 100644
--- a/drivers/mfd/tps65218.c
+++ b/drivers/mfd/tps65218.c
@@ -197,6 +197,7 @@ static struct regmap_irq_chip tps65218_irq_chip = {
static const struct of_device_id of_tps65218_match_table[] = {
{ .compatible = "ti,tps65218", },
+ {}
};
static int tps65218_probe(struct i2c_client *client,
diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c
index 835e5549ecdd..8e1dbc469580 100644
--- a/drivers/mfd/tps6586x.c
+++ b/drivers/mfd/tps6586x.c
@@ -444,7 +444,7 @@ static struct tps6586x_platform_data *tps6586x_parse_dt(struct i2c_client *clien
return pdata;
}
-static struct of_device_id tps6586x_of_match[] = {
+static const struct of_device_id tps6586x_of_match[] = {
{ .compatible = "ti,tps6586x", },
{ },
};
diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c
index 460a014ca629..f9e42ea1cb1a 100644
--- a/drivers/mfd/tps65910.c
+++ b/drivers/mfd/tps65910.c
@@ -379,7 +379,7 @@ err_sleep_init:
}
#ifdef CONFIG_OF
-static struct of_device_id tps65910_of_match[] = {
+static const struct of_device_id tps65910_of_match[] = {
{ .compatible = "ti,tps65910", .data = (void *)TPS65910},
{ .compatible = "ti,tps65911", .data = (void *)TPS65911},
{ },
diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c
index 6e88f25832fb..ae26d84b3a59 100644
--- a/drivers/mfd/twl6040.c
+++ b/drivers/mfd/twl6040.c
@@ -87,8 +87,13 @@ static struct reg_default twl6040_defaults[] = {
};
static struct reg_default twl6040_patch[] = {
- /* Select I2C bus access to dual access registers */
- { TWL6040_REG_ACCCTL, 0x09 },
+ /*
+ * Select I2C bus access to dual access registers
+ * Interrupt register is cleared on read
+ * Select fast mode for i2c (400KHz)
+ */
+ { TWL6040_REG_ACCCTL,
+ TWL6040_I2CSEL | TWL6040_INTCLRMODE | TWL6040_I2CMODE(1) },
};
@@ -286,6 +291,8 @@ int twl6040_power(struct twl6040 *twl6040, int on)
if (twl6040->power_count++)
goto out;
+ clk_prepare_enable(twl6040->clk32k);
+
/* Allow writes to the chip */
regcache_cache_only(twl6040->regmap, false);
@@ -341,6 +348,8 @@ int twl6040_power(struct twl6040 *twl6040, int on)
twl6040->sysclk = 0;
twl6040->mclk = 0;
+
+ clk_disable_unprepare(twl6040->clk32k);
}
out:
@@ -432,12 +441,9 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
TWL6040_HPLLENA;
break;
case 19200000:
- /*
- * PLL disabled
- * (enable PLL if MCLK jitter quality
- * doesn't meet specification)
- */
- hppllctl |= TWL6040_MCLK_19200KHZ;
+ /* PLL enabled, bypass mode */
+ hppllctl |= TWL6040_MCLK_19200KHZ |
+ TWL6040_HPLLBP | TWL6040_HPLLENA;
break;
case 26000000:
/* PLL enabled, active mode */
@@ -445,9 +451,9 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
TWL6040_HPLLENA;
break;
case 38400000:
- /* PLL enabled, active mode */
+ /* PLL enabled, bypass mode */
hppllctl |= TWL6040_MCLK_38400KHZ |
- TWL6040_HPLLENA;
+ TWL6040_HPLLBP | TWL6040_HPLLENA;
break;
default:
dev_err(twl6040->dev,
@@ -639,6 +645,12 @@ static int twl6040_probe(struct i2c_client *client,
i2c_set_clientdata(client, twl6040);
+ twl6040->clk32k = devm_clk_get(&client->dev, "clk32k");
+ if (IS_ERR(twl6040->clk32k)) {
+ dev_info(&client->dev, "clk32k is not handled\n");
+ twl6040->clk32k = NULL;
+ }
+
twl6040->supplies[0].supply = "vio";
twl6040->supplies[1].supply = "v2v1";
ret = devm_regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES,
@@ -660,6 +672,9 @@ static int twl6040_probe(struct i2c_client *client,
mutex_init(&twl6040->mutex);
init_completion(&twl6040->ready);
+ regmap_register_patch(twl6040->regmap, twl6040_patch,
+ ARRAY_SIZE(twl6040_patch));
+
twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
if (twl6040->rev < 0) {
dev_err(&client->dev, "Failed to read revision register: %d\n",
@@ -679,6 +694,9 @@ static int twl6040_probe(struct i2c_client *client,
GPIOF_OUT_INIT_LOW, "audpwron");
if (ret)
goto gpio_err;
+
+ /* Clear any pending interrupt */
+ twl6040_reg_read(twl6040, TWL6040_REG_INTID);
}
ret = regmap_add_irq_chip(twl6040->regmap, twl6040->irq, IRQF_ONESHOT,
@@ -707,10 +725,6 @@ static int twl6040_probe(struct i2c_client *client,
goto readyirq_err;
}
- /* dual-access registers controlled by I2C only */
- regmap_register_patch(twl6040->regmap, twl6040_patch,
- ARRAY_SIZE(twl6040_patch));
-
/*
* The main functionality of twl6040 to provide audio on OMAP4+ systems.
* We can add the ASoC codec child whenever this driver has been loaded.
diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c
index 070f8cfbbd7a..c8a993bd17ae 100644
--- a/drivers/mfd/wm5102-tables.c
+++ b/drivers/mfd/wm5102-tables.c
@@ -333,7 +333,7 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x000001AA, 0x0004 }, /* R426 - FLL2 GPIO Clock */
{ 0x00000200, 0x0006 }, /* R512 - Mic Charge Pump 1 */
{ 0x00000210, 0x00D4 }, /* R528 - LDO1 Control 1 */
- { 0x00000212, 0x0001 }, /* R530 - LDO1 Control 2 */
+ { 0x00000212, 0x0000 }, /* R530 - LDO1 Control 2 */
{ 0x00000213, 0x0344 }, /* R531 - LDO2 Control 1 */
{ 0x00000218, 0x01A6 }, /* R536 - Mic Bias Ctrl 1 */
{ 0x00000219, 0x01A6 }, /* R537 - Mic Bias Ctrl 2 */
@@ -1037,6 +1037,8 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_4:
case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_5:
case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_6:
+ case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_7:
+ case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_8:
case ARIZONA_COMFORT_NOISE_GENERATOR:
case ARIZONA_HAPTICS_CONTROL_1:
case ARIZONA_HAPTICS_CONTROL_2:
diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c
index 1942b6f231da..41a7f6fb7802 100644
--- a/drivers/mfd/wm5110-tables.c
+++ b/drivers/mfd/wm5110-tables.c
@@ -468,10 +468,12 @@ static const struct reg_default wm5110_reg_default[] = {
{ 0x00000062, 0x01FF }, /* R98 - Sample Rate Sequence Select 2 */
{ 0x00000063, 0x01FF }, /* R99 - Sample Rate Sequence Select 3 */
{ 0x00000064, 0x01FF }, /* R100 - Sample Rate Sequence Select 4 */
- { 0x00000068, 0x01FF }, /* R104 - Always On Triggers Sequence Select 1 */
- { 0x00000069, 0x01FF }, /* R105 - Always On Triggers Sequence Select 2 */
- { 0x0000006A, 0x01FF }, /* R106 - Always On Triggers Sequence Select 3 */
- { 0x0000006B, 0x01FF }, /* R107 - Always On Triggers Sequence Select 4 */
+ { 0x00000066, 0x01FF }, /* R102 - Always On Triggers Sequence Select 1 */
+ { 0x00000067, 0x01FF }, /* R103 - Always On Triggers Sequence Select 2 */
+ { 0x00000068, 0x01FF }, /* R104 - Always On Triggers Sequence Select 3 */
+ { 0x00000069, 0x01FF }, /* R105 - Always On Triggers Sequence Select 4 */
+ { 0x0000006A, 0x01FF }, /* R106 - Always On Triggers Sequence Select 5 */
+ { 0x0000006B, 0x01FF }, /* R107 - Always On Triggers Sequence Select 6 */
{ 0x00000070, 0x0000 }, /* R112 - Comfort Noise Generator */
{ 0x00000090, 0x0000 }, /* R144 - Haptics Control 1 */
{ 0x00000091, 0x7FFF }, /* R145 - Haptics Control 2 */
@@ -549,6 +551,7 @@ static const struct reg_default wm5110_reg_default[] = {
{ 0x000002A8, 0x1422 }, /* R680 - Mic Detect Level 3 */
{ 0x000002A9, 0x300A }, /* R681 - Mic Detect Level 4 */
{ 0x000002C3, 0x0000 }, /* R707 - Mic noise mix control 1 */
+ { 0x000002CB, 0x0000 }, /* R715 - Isolation control */
{ 0x000002D3, 0x0000 }, /* R723 - Jack detect analogue */
{ 0x00000300, 0x0000 }, /* R768 - Input Enables */
{ 0x00000308, 0x0000 }, /* R776 - Input Rate */
@@ -1498,6 +1501,8 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_2:
case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_3:
case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_4:
+ case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_5:
+ case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_6:
case ARIZONA_COMFORT_NOISE_GENERATOR:
case ARIZONA_HAPTICS_CONTROL_1:
case ARIZONA_HAPTICS_CONTROL_2:
@@ -1580,6 +1585,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_MIC_DETECT_LEVEL_3:
case ARIZONA_MIC_DETECT_LEVEL_4:
case ARIZONA_MIC_NOISE_MIX_CONTROL_1:
+ case ARIZONA_ISOLATION_CONTROL:
case ARIZONA_JACK_DETECT_ANALOGUE:
case ARIZONA_INPUT_ENABLES:
case ARIZONA_INPUT_ENABLES_STATUS:
diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c
index e5eae751aa1b..c6fb5d16ca09 100644
--- a/drivers/mfd/wm8400-core.c
+++ b/drivers/mfd/wm8400-core.c
@@ -64,7 +64,7 @@ EXPORT_SYMBOL_GPL(wm8400_block_read);
static int wm8400_register_codec(struct wm8400 *wm8400)
{
- struct mfd_cell cell = {
+ const struct mfd_cell cell = {
.name = "wm8400-codec",
.platform_data = wm8400,
.pdata_size = sizeof(*wm8400),
diff --git a/drivers/mfd/wm8997-tables.c b/drivers/mfd/wm8997-tables.c
index 5aa807687777..c7a81da64ee1 100644
--- a/drivers/mfd/wm8997-tables.c
+++ b/drivers/mfd/wm8997-tables.c
@@ -174,10 +174,10 @@ static const struct reg_default wm8997_reg_default[] = {
{ 0x00000062, 0x01FF }, /* R98 - Sample Rate Sequence Select 2 */
{ 0x00000063, 0x01FF }, /* R99 - Sample Rate Sequence Select 3 */
{ 0x00000064, 0x01FF }, /* R100 - Sample Rate Sequence Select 4 */
- { 0x00000068, 0x01FF }, /* R104 - Always On Triggers Sequence Select 1 */
- { 0x00000069, 0x01FF }, /* R105 - Always On Triggers Sequence Select 2 */
- { 0x0000006A, 0x01FF }, /* R106 - Always On Triggers Sequence Select 3 */
- { 0x0000006B, 0x01FF }, /* R107 - Always On Triggers Sequence Select 4 */
+ { 0x00000068, 0x01FF }, /* R104 - Always On Triggers Sequence Select 3 */
+ { 0x00000069, 0x01FF }, /* R105 - Always On Triggers Sequence Select 4 */
+ { 0x0000006A, 0x01FF }, /* R106 - Always On Triggers Sequence Select 5 */
+ { 0x0000006B, 0x01FF }, /* R107 - Always On Triggers Sequence Select 6 */
{ 0x00000070, 0x0000 }, /* R112 - Comfort Noise Generator */
{ 0x00000090, 0x0000 }, /* R144 - Haptics Control 1 */
{ 0x00000091, 0x7FFF }, /* R145 - Haptics Control 2 */
@@ -814,10 +814,10 @@ static bool wm8997_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_2:
case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_3:
case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_4:
- case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_1:
- case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_2:
case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_3:
case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_4:
+ case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_5:
+ case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_6:
case ARIZONA_COMFORT_NOISE_GENERATOR:
case ARIZONA_HAPTICS_CONTROL_1:
case ARIZONA_HAPTICS_CONTROL_2:
@@ -846,6 +846,7 @@ static bool wm8997_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_RATE_ESTIMATOR_3:
case ARIZONA_RATE_ESTIMATOR_4:
case ARIZONA_RATE_ESTIMATOR_5:
+ case ARIZONA_DYNAMIC_FREQUENCY_SCALING_1:
case ARIZONA_FLL1_CONTROL_1:
case ARIZONA_FLL1_CONTROL_2:
case ARIZONA_FLL1_CONTROL_3:
@@ -880,6 +881,7 @@ static bool wm8997_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_FLL2_GPIO_CLOCK:
case ARIZONA_MIC_CHARGE_PUMP_1:
case ARIZONA_LDO1_CONTROL_1:
+ case ARIZONA_LDO1_CONTROL_2:
case ARIZONA_LDO2_CONTROL_1:
case ARIZONA_MIC_BIAS_CTRL_1:
case ARIZONA_MIC_BIAS_CTRL_2:
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 8aaf8c1f3f63..b675882307e4 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -694,3 +694,10 @@ config MMC_REALTEK_PCI
help
Say Y here to include driver code to support SD/MMC card interface
of Realtek PCI-E card reader
+
+config MMC_REALTEK_USB
+ tristate "Realtek USB SD/MMC Card Interface Driver"
+ depends on MFD_RTSX_USB
+ help
+ Say Y here to include driver code to support SD/MMC card interface
+ of Realtek RTS5129/39 series card reader
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 0c8aa5e1e304..3eb48b656f25 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -52,6 +52,7 @@ obj-$(CONFIG_MMC_USHC) += ushc.o
obj-$(CONFIG_MMC_WMT) += wmt-sdmmc.o
obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o
+obj-$(CONFIG_MMC_REALTEK_USB) += rtsx_usb_sdmmc.o
obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o
obj-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o
diff --git a/drivers/mmc/host/rtsx_usb_sdmmc.c b/drivers/mmc/host/rtsx_usb_sdmmc.c
new file mode 100644
index 000000000000..e11fafa6fc6b
--- /dev/null
+++ b/drivers/mmc/host/rtsx_usb_sdmmc.c
@@ -0,0 +1,1455 @@
+/* Realtek USB SD/MMC Card Interface driver
+ *
+ * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ * Roger Tseng <rogerable@realtek.com>
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/usb.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/card.h>
+#include <linux/scatterlist.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/mfd/rtsx_usb.h>
+#include <asm/unaligned.h>
+
+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+#include <linux/leds.h>
+#include <linux/workqueue.h>
+#define RTSX_USB_USE_LEDS_CLASS
+#endif
+
+struct rtsx_usb_sdmmc {
+ struct platform_device *pdev;
+ struct rtsx_ucr *ucr;
+ struct mmc_host *mmc;
+ struct mmc_request *mrq;
+
+ struct mutex host_mutex;
+
+ u8 ssc_depth;
+ unsigned int clock;
+ bool vpclk;
+ bool double_clk;
+ bool host_removal;
+ bool card_exist;
+ bool initial_mode;
+ bool ddr_mode;
+
+ unsigned char power_mode;
+
+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+ struct led_classdev led;
+ char led_name[32];
+ struct work_struct led_work;
+#endif
+};
+
+static inline struct device *sdmmc_dev(struct rtsx_usb_sdmmc *host)
+{
+ return &(host->pdev->dev);
+}
+
+static inline void sd_clear_error(struct rtsx_usb_sdmmc *host)
+{
+ struct rtsx_ucr *ucr = host->ucr;
+ rtsx_usb_ep0_write_register(ucr, CARD_STOP,
+ SD_STOP | SD_CLR_ERR,
+ SD_STOP | SD_CLR_ERR);
+
+ rtsx_usb_clear_dma_err(ucr);
+ rtsx_usb_clear_fsm_err(ucr);
+}
+
+#ifdef DEBUG
+static void sd_print_debug_regs(struct rtsx_usb_sdmmc *host)
+{
+ struct rtsx_ucr *ucr = host->ucr;
+ u8 val = 0;
+
+ rtsx_usb_ep0_read_register(ucr, SD_STAT1, &val);
+ dev_dbg(sdmmc_dev(host), "SD_STAT1: 0x%x\n", val);
+ rtsx_usb_ep0_read_register(ucr, SD_STAT2, &val);
+ dev_dbg(sdmmc_dev(host), "SD_STAT2: 0x%x\n", val);
+ rtsx_usb_ep0_read_register(ucr, SD_BUS_STAT, &val);
+ dev_dbg(sdmmc_dev(host), "SD_BUS_STAT: 0x%x\n", val);
+}
+#else
+#define sd_print_debug_regs(host)
+#endif /* DEBUG */
+
+static int sd_read_data(struct rtsx_usb_sdmmc *host, struct mmc_command *cmd,
+ u16 byte_cnt, u8 *buf, int buf_len, int timeout)
+{
+ struct rtsx_ucr *ucr = host->ucr;
+ int err;
+ u8 trans_mode;
+
+ if (!buf)
+ buf_len = 0;
+
+ rtsx_usb_init_cmd(ucr);
+ if (cmd != NULL) {
+ dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD%d\n", __func__
+ , cmd->opcode);
+ if (cmd->opcode == MMC_SEND_TUNING_BLOCK)
+ trans_mode = SD_TM_AUTO_TUNING;
+ else
+ trans_mode = SD_TM_NORMAL_READ;
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+ SD_CMD0, 0xFF, (u8)(cmd->opcode) | 0x40);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+ SD_CMD1, 0xFF, (u8)(cmd->arg >> 24));
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+ SD_CMD2, 0xFF, (u8)(cmd->arg >> 16));
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+ SD_CMD3, 0xFF, (u8)(cmd->arg >> 8));
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+ SD_CMD4, 0xFF, (u8)cmd->arg);
+ } else {
+ trans_mode = SD_TM_AUTO_READ_3;
+ }
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, (u8)byte_cnt);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_H,
+ 0xFF, (u8)(byte_cnt >> 8));
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_L, 0xFF, 1);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_H, 0xFF, 0);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG2, 0xFF,
+ SD_CALCULATE_CRC7 | SD_CHECK_CRC16 |
+ SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_6);
+ if (trans_mode != SD_TM_AUTO_TUNING)
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+ CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_TRANSFER,
+ 0xFF, trans_mode | SD_TRANSFER_START);
+ rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, SD_TRANSFER,
+ SD_TRANSFER_END, SD_TRANSFER_END);
+
+ if (cmd != NULL) {
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD1, 0, 0);
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD2, 0, 0);
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD3, 0, 0);
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD4, 0, 0);
+ }
+
+ err = rtsx_usb_send_cmd(ucr, MODE_CR, timeout);
+ if (err) {
+ dev_dbg(sdmmc_dev(host),
+ "rtsx_usb_send_cmd failed (err = %d)\n", err);
+ return err;
+ }
+
+ err = rtsx_usb_get_rsp(ucr, !cmd ? 1 : 5, timeout);
+ if (err || (ucr->rsp_buf[0] & SD_TRANSFER_ERR)) {
+ sd_print_debug_regs(host);
+
+ if (!err) {
+ dev_dbg(sdmmc_dev(host),
+ "Transfer failed (SD_TRANSFER = %02x)\n",
+ ucr->rsp_buf[0]);
+ err = -EIO;
+ } else {
+ dev_dbg(sdmmc_dev(host),
+ "rtsx_usb_get_rsp failed (err = %d)\n", err);
+ }
+
+ return err;
+ }
+
+ if (cmd != NULL) {
+ cmd->resp[0] = get_unaligned_be32(ucr->rsp_buf + 1);
+ dev_dbg(sdmmc_dev(host), "cmd->resp[0] = 0x%08x\n",
+ cmd->resp[0]);
+ }
+
+ if (buf && buf_len) {
+ /* 2-byte aligned part */
+ err = rtsx_usb_read_ppbuf(ucr, buf, byte_cnt - (byte_cnt % 2));
+ if (err) {
+ dev_dbg(sdmmc_dev(host),
+ "rtsx_usb_read_ppbuf failed (err = %d)\n", err);
+ return err;
+ }
+
+ /* unaligned byte */
+ if (byte_cnt % 2)
+ return rtsx_usb_read_register(ucr,
+ PPBUF_BASE2 + byte_cnt,
+ buf + byte_cnt - 1);
+ }
+
+ return 0;
+}
+
+static int sd_write_data(struct rtsx_usb_sdmmc *host, struct mmc_command *cmd,
+ u16 byte_cnt, u8 *buf, int buf_len, int timeout)
+{
+ struct rtsx_ucr *ucr = host->ucr;
+ int err;
+ u8 trans_mode;
+
+ if (!buf)
+ buf_len = 0;
+
+ if (buf && buf_len) {
+ err = rtsx_usb_write_ppbuf(ucr, buf, buf_len);
+ if (err) {
+ dev_dbg(sdmmc_dev(host),
+ "rtsx_usb_write_ppbuf failed (err = %d)\n",
+ err);
+ return err;
+ }
+ }
+
+ trans_mode = (cmd != NULL) ? SD_TM_AUTO_WRITE_2 : SD_TM_AUTO_WRITE_3;
+ rtsx_usb_init_cmd(ucr);
+
+ if (cmd != NULL) {
+ dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD%d\n", __func__,
+ cmd->opcode);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+ SD_CMD0, 0xFF, (u8)(cmd->opcode) | 0x40);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+ SD_CMD1, 0xFF, (u8)(cmd->arg >> 24));
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+ SD_CMD2, 0xFF, (u8)(cmd->arg >> 16));
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+ SD_CMD3, 0xFF, (u8)(cmd->arg >> 8));
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+ SD_CMD4, 0xFF, (u8)cmd->arg);
+ }
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, (u8)byte_cnt);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_H,
+ 0xFF, (u8)(byte_cnt >> 8));
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_L, 0xFF, 1);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_H, 0xFF, 0);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG2, 0xFF,
+ SD_CALCULATE_CRC7 | SD_CHECK_CRC16 |
+ SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_6);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+ CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_TRANSFER, 0xFF,
+ trans_mode | SD_TRANSFER_START);
+ rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, SD_TRANSFER,
+ SD_TRANSFER_END, SD_TRANSFER_END);
+
+ if (cmd != NULL) {
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD1, 0, 0);
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD2, 0, 0);
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD3, 0, 0);
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD4, 0, 0);
+ }
+
+ err = rtsx_usb_send_cmd(ucr, MODE_CR, timeout);
+ if (err) {
+ dev_dbg(sdmmc_dev(host),
+ "rtsx_usb_send_cmd failed (err = %d)\n", err);
+ return err;
+ }
+
+ err = rtsx_usb_get_rsp(ucr, !cmd ? 1 : 5, timeout);
+ if (err) {
+ sd_print_debug_regs(host);
+ dev_dbg(sdmmc_dev(host),
+ "rtsx_usb_get_rsp failed (err = %d)\n", err);
+ return err;
+ }
+
+ if (cmd != NULL) {
+ cmd->resp[0] = get_unaligned_be32(ucr->rsp_buf + 1);
+ dev_dbg(sdmmc_dev(host), "cmd->resp[0] = 0x%08x\n",
+ cmd->resp[0]);
+ }
+
+ return 0;
+}
+
+static void sd_send_cmd_get_rsp(struct rtsx_usb_sdmmc *host,
+ struct mmc_command *cmd)
+{
+ struct rtsx_ucr *ucr = host->ucr;
+ u8 cmd_idx = (u8)cmd->opcode;
+ u32 arg = cmd->arg;
+ int err = 0;
+ int timeout = 100;
+ int i;
+ u8 *ptr;
+ int stat_idx = 0;
+ int len = 2;
+ u8 rsp_type;
+
+ dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD %d, arg = 0x%08x\n",
+ __func__, cmd_idx, arg);
+
+ /* Response type:
+ * R0
+ * R1, R5, R6, R7
+ * R1b
+ * R2
+ * R3, R4
+ */
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_NONE:
+ rsp_type = SD_RSP_TYPE_R0;
+ break;
+ case MMC_RSP_R1:
+ rsp_type = SD_RSP_TYPE_R1;
+ break;
+ case MMC_RSP_R1 & ~MMC_RSP_CRC:
+ rsp_type = SD_RSP_TYPE_R1 | SD_NO_CHECK_CRC7;
+ break;
+ case MMC_RSP_R1B:
+ rsp_type = SD_RSP_TYPE_R1b;
+ break;
+ case MMC_RSP_R2:
+ rsp_type = SD_RSP_TYPE_R2;
+ break;
+ case MMC_RSP_R3:
+ rsp_type = SD_RSP_TYPE_R3;
+ break;
+ default:
+ dev_dbg(sdmmc_dev(host), "cmd->flag is not valid\n");
+ err = -EINVAL;
+ goto out;
+ }
+
+ if (rsp_type == SD_RSP_TYPE_R1b)
+ timeout = 3000;
+
+ if (cmd->opcode == SD_SWITCH_VOLTAGE) {
+ err = rtsx_usb_write_register(ucr, SD_BUS_STAT,
+ SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP,
+ SD_CLK_TOGGLE_EN);
+ if (err)
+ goto out;
+ }
+
+ rtsx_usb_init_cmd(ucr);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CMD0, 0xFF, 0x40 | cmd_idx);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CMD1, 0xFF, (u8)(arg >> 24));
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CMD2, 0xFF, (u8)(arg >> 16));
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CMD3, 0xFF, (u8)(arg >> 8));
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CMD4, 0xFF, (u8)arg);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG2, 0xFF, rsp_type);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_DATA_SOURCE,
+ 0x01, PINGPONG_BUFFER);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_TRANSFER,
+ 0xFF, SD_TM_CMD_RSP | SD_TRANSFER_START);
+ rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, SD_TRANSFER,
+ SD_TRANSFER_END | SD_STAT_IDLE,
+ SD_TRANSFER_END | SD_STAT_IDLE);
+
+ if (rsp_type == SD_RSP_TYPE_R2) {
+ /* Read data from ping-pong buffer */
+ for (i = PPBUF_BASE2; i < PPBUF_BASE2 + 16; i++)
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, (u16)i, 0, 0);
+ stat_idx = 16;
+ } else if (rsp_type != SD_RSP_TYPE_R0) {
+ /* Read data from SD_CMDx registers */
+ for (i = SD_CMD0; i <= SD_CMD4; i++)
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, (u16)i, 0, 0);
+ stat_idx = 5;
+ }
+ len += stat_idx;
+
+ rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_STAT1, 0, 0);
+
+ err = rtsx_usb_send_cmd(ucr, MODE_CR, 100);
+ if (err) {
+ dev_dbg(sdmmc_dev(host),
+ "rtsx_usb_send_cmd error (err = %d)\n", err);
+ goto out;
+ }
+
+ err = rtsx_usb_get_rsp(ucr, len, timeout);
+ if (err || (ucr->rsp_buf[0] & SD_TRANSFER_ERR)) {
+ sd_print_debug_regs(host);
+ sd_clear_error(host);
+
+ if (!err) {
+ dev_dbg(sdmmc_dev(host),
+ "Transfer failed (SD_TRANSFER = %02x)\n",
+ ucr->rsp_buf[0]);
+ err = -EIO;
+ } else {
+ dev_dbg(sdmmc_dev(host),
+ "rtsx_usb_get_rsp failed (err = %d)\n", err);
+ }
+
+ goto out;
+ }
+
+ if (rsp_type == SD_RSP_TYPE_R0) {
+ err = 0;
+ goto out;
+ }
+
+ /* Skip result of CHECK_REG_CMD */
+ ptr = ucr->rsp_buf + 1;
+
+ /* Check (Start,Transmission) bit of Response */
+ if ((ptr[0] & 0xC0) != 0) {
+ err = -EILSEQ;
+ dev_dbg(sdmmc_dev(host), "Invalid response bit\n");
+ goto out;
+ }
+
+ /* Check CRC7 */
+ if (!(rsp_type & SD_NO_CHECK_CRC7)) {
+ if (ptr[stat_idx] & SD_CRC7_ERR) {
+ err = -EILSEQ;
+ dev_dbg(sdmmc_dev(host), "CRC7 error\n");
+ goto out;
+ }
+ }
+
+ if (rsp_type == SD_RSP_TYPE_R2) {
+ for (i = 0; i < 4; i++) {
+ cmd->resp[i] = get_unaligned_be32(ptr + 1 + i * 4);
+ dev_dbg(sdmmc_dev(host), "cmd->resp[%d] = 0x%08x\n",
+ i, cmd->resp[i]);
+ }
+ } else {
+ cmd->resp[0] = get_unaligned_be32(ptr + 1);
+ dev_dbg(sdmmc_dev(host), "cmd->resp[0] = 0x%08x\n",
+ cmd->resp[0]);
+ }
+
+out:
+ cmd->error = err;
+}
+
+static int sd_rw_multi(struct rtsx_usb_sdmmc *host, struct mmc_request *mrq)
+{
+ struct rtsx_ucr *ucr = host->ucr;
+ struct mmc_data *data = mrq->data;
+ int read = (data->flags & MMC_DATA_READ) ? 1 : 0;
+ u8 cfg2, trans_mode;
+ int err;
+ u8 flag;
+ size_t data_len = data->blksz * data->blocks;
+ unsigned int pipe;
+
+ if (read) {
+ dev_dbg(sdmmc_dev(host), "%s: read %zu bytes\n",
+ __func__, data_len);
+ cfg2 = SD_CALCULATE_CRC7 | SD_CHECK_CRC16 |
+ SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_0;
+ trans_mode = SD_TM_AUTO_READ_3;
+ } else {
+ dev_dbg(sdmmc_dev(host), "%s: write %zu bytes\n",
+ __func__, data_len);
+ cfg2 = SD_NO_CALCULATE_CRC7 | SD_CHECK_CRC16 |
+ SD_NO_WAIT_BUSY_END | SD_NO_CHECK_CRC7 | SD_RSP_LEN_0;
+ trans_mode = SD_TM_AUTO_WRITE_3;
+ }
+
+ rtsx_usb_init_cmd(ucr);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, 0x00);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_H, 0xFF, 0x02);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_L,
+ 0xFF, (u8)data->blocks);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_H,
+ 0xFF, (u8)(data->blocks >> 8));
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_DATA_SOURCE,
+ 0x01, RING_BUFFER);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC3,
+ 0xFF, (u8)(data_len >> 24));
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC2,
+ 0xFF, (u8)(data_len >> 16));
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC1,
+ 0xFF, (u8)(data_len >> 8));
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC0,
+ 0xFF, (u8)data_len);
+ if (read) {
+ flag = MODE_CDIR;
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_CTL,
+ 0x03 | DMA_PACK_SIZE_MASK,
+ DMA_DIR_FROM_CARD | DMA_EN | DMA_512);
+ } else {
+ flag = MODE_CDOR;
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_CTL,
+ 0x03 | DMA_PACK_SIZE_MASK,
+ DMA_DIR_TO_CARD | DMA_EN | DMA_512);
+ }
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG2, 0xFF, cfg2);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_TRANSFER, 0xFF,
+ trans_mode | SD_TRANSFER_START);
+ rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, SD_TRANSFER,
+ SD_TRANSFER_END, SD_TRANSFER_END);
+
+ err = rtsx_usb_send_cmd(ucr, flag, 100);
+ if (err)
+ return err;
+
+ if (read)
+ pipe = usb_rcvbulkpipe(ucr->pusb_dev, EP_BULK_IN);
+ else
+ pipe = usb_sndbulkpipe(ucr->pusb_dev, EP_BULK_OUT);
+
+ err = rtsx_usb_transfer_data(ucr, pipe, data->sg, data_len,
+ data->sg_len, NULL, 10000);
+ if (err) {
+ dev_dbg(sdmmc_dev(host), "rtsx_usb_transfer_data error %d\n"
+ , err);
+ sd_clear_error(host);
+ return err;
+ }
+
+ return rtsx_usb_get_rsp(ucr, 1, 2000);
+}
+
+static inline void sd_enable_initial_mode(struct rtsx_usb_sdmmc *host)
+{
+ rtsx_usb_write_register(host->ucr, SD_CFG1,
+ SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_128);
+}
+
+static inline void sd_disable_initial_mode(struct rtsx_usb_sdmmc *host)
+{
+ rtsx_usb_write_register(host->ucr, SD_CFG1,
+ SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_0);
+}
+
+static void sd_normal_rw(struct rtsx_usb_sdmmc *host,
+ struct mmc_request *mrq)
+{
+ struct mmc_command *cmd = mrq->cmd;
+ struct mmc_data *data = mrq->data;
+ u8 *buf;
+
+ buf = kzalloc(data->blksz, GFP_NOIO);
+ if (!buf) {
+ cmd->error = -ENOMEM;
+ return;
+ }
+
+ if (data->flags & MMC_DATA_READ) {
+ if (host->initial_mode)
+ sd_disable_initial_mode(host);
+
+ cmd->error = sd_read_data(host, cmd, (u16)data->blksz, buf,
+ data->blksz, 200);
+
+ if (host->initial_mode)
+ sd_enable_initial_mode(host);
+
+ sg_copy_from_buffer(data->sg, data->sg_len, buf, data->blksz);
+ } else {
+ sg_copy_to_buffer(data->sg, data->sg_len, buf, data->blksz);
+
+ cmd->error = sd_write_data(host, cmd, (u16)data->blksz, buf,
+ data->blksz, 200);
+ }
+
+ kfree(buf);
+}
+
+static int sd_change_phase(struct rtsx_usb_sdmmc *host, u8 sample_point, int tx)
+{
+ struct rtsx_ucr *ucr = host->ucr;
+ int err;
+
+ dev_dbg(sdmmc_dev(host), "%s: %s sample_point = %d\n",
+ __func__, tx ? "TX" : "RX", sample_point);
+
+ rtsx_usb_init_cmd(ucr);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CLK_DIV, CLK_CHANGE, CLK_CHANGE);
+
+ if (tx)
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK0_CTL,
+ 0x0F, sample_point);
+ else
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK1_CTL,
+ 0x0F, sample_point);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK0_CTL, PHASE_NOT_RESET, 0);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK0_CTL,
+ PHASE_NOT_RESET, PHASE_NOT_RESET);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CLK_DIV, CLK_CHANGE, 0);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG1, SD_ASYNC_FIFO_RST, 0);
+
+ err = rtsx_usb_send_cmd(ucr, MODE_C, 100);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+static inline u32 get_phase_point(u32 phase_map, unsigned int idx)
+{
+ idx &= MAX_PHASE;
+ return phase_map & (1 << idx);
+}
+
+static int get_phase_len(u32 phase_map, unsigned int idx)
+{
+ int i;
+
+ for (i = 0; i < MAX_PHASE + 1; i++) {
+ if (get_phase_point(phase_map, idx + i) == 0)
+ return i;
+ }
+ return MAX_PHASE + 1;
+}
+
+static u8 sd_search_final_phase(struct rtsx_usb_sdmmc *host, u32 phase_map)
+{
+ int start = 0, len = 0;
+ int start_final = 0, len_final = 0;
+ u8 final_phase = 0xFF;
+
+ if (phase_map == 0) {
+ dev_dbg(sdmmc_dev(host), "Phase: [map:%x]\n", phase_map);
+ return final_phase;
+ }
+
+ while (start < MAX_PHASE + 1) {
+ len = get_phase_len(phase_map, start);
+ if (len_final < len) {
+ start_final = start;
+ len_final = len;
+ }
+ start += len ? len : 1;
+ }
+
+ final_phase = (start_final + len_final / 2) & MAX_PHASE;
+ dev_dbg(sdmmc_dev(host), "Phase: [map:%x] [maxlen:%d] [final:%d]\n",
+ phase_map, len_final, final_phase);
+
+ return final_phase;
+}
+
+static void sd_wait_data_idle(struct rtsx_usb_sdmmc *host)
+{
+ int err, i;
+ u8 val = 0;
+
+ for (i = 0; i < 100; i++) {
+ err = rtsx_usb_ep0_read_register(host->ucr,
+ SD_DATA_STATE, &val);
+ if (val & SD_DATA_IDLE)
+ return;
+
+ usleep_range(100, 1000);
+ }
+}
+
+static int sd_tuning_rx_cmd(struct rtsx_usb_sdmmc *host,
+ u8 opcode, u8 sample_point)
+{
+ int err;
+ struct mmc_command cmd = {0};
+
+ err = sd_change_phase(host, sample_point, 0);
+ if (err)
+ return err;
+
+ cmd.opcode = MMC_SEND_TUNING_BLOCK;
+ err = sd_read_data(host, &cmd, 0x40, NULL, 0, 100);
+ if (err) {
+ /* Wait till SD DATA IDLE */
+ sd_wait_data_idle(host);
+ sd_clear_error(host);
+ return err;
+ }
+
+ return 0;
+}
+
+static void sd_tuning_phase(struct rtsx_usb_sdmmc *host,
+ u8 opcode, u16 *phase_map)
+{
+ int err, i;
+ u16 raw_phase_map = 0;
+
+ for (i = MAX_PHASE; i >= 0; i--) {
+ err = sd_tuning_rx_cmd(host, opcode, (u8)i);
+ if (!err)
+ raw_phase_map |= 1 << i;
+ }
+
+ if (phase_map)
+ *phase_map = raw_phase_map;
+}
+
+static int sd_tuning_rx(struct rtsx_usb_sdmmc *host, u8 opcode)
+{
+ int err, i;
+ u16 raw_phase_map[RX_TUNING_CNT] = {0}, phase_map;
+ u8 final_phase;
+
+ /* setting fixed default TX phase */
+ err = sd_change_phase(host, 0x01, 1);
+ if (err) {
+ dev_dbg(sdmmc_dev(host), "TX phase setting failed\n");
+ return err;
+ }
+
+ /* tuning RX phase */
+ for (i = 0; i < RX_TUNING_CNT; i++) {
+ sd_tuning_phase(host, opcode, &(raw_phase_map[i]));
+
+ if (raw_phase_map[i] == 0)
+ break;
+ }
+
+ phase_map = 0xFFFF;
+ for (i = 0; i < RX_TUNING_CNT; i++) {
+ dev_dbg(sdmmc_dev(host), "RX raw_phase_map[%d] = 0x%04x\n",
+ i, raw_phase_map[i]);
+ phase_map &= raw_phase_map[i];
+ }
+ dev_dbg(sdmmc_dev(host), "RX phase_map = 0x%04x\n", phase_map);
+
+ if (phase_map) {
+ final_phase = sd_search_final_phase(host, phase_map);
+ if (final_phase == 0xFF)
+ return -EINVAL;
+
+ err = sd_change_phase(host, final_phase, 0);
+ if (err)
+ return err;
+ } else {
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int sdmmc_get_ro(struct mmc_host *mmc)
+{
+ struct rtsx_usb_sdmmc *host = mmc_priv(mmc);
+ struct rtsx_ucr *ucr = host->ucr;
+ int err;
+ u16 val;
+
+ if (host->host_removal)
+ return -ENOMEDIUM;
+
+ mutex_lock(&ucr->dev_mutex);
+
+ /* Check SD card detect */
+ err = rtsx_usb_get_card_status(ucr, &val);
+
+ mutex_unlock(&ucr->dev_mutex);
+
+
+ /* Treat failed detection as non-ro */
+ if (err)
+ return 0;
+
+ if (val & SD_WP)
+ return 1;
+
+ return 0;
+}
+
+static int sdmmc_get_cd(struct mmc_host *mmc)
+{
+ struct rtsx_usb_sdmmc *host = mmc_priv(mmc);
+ struct rtsx_ucr *ucr = host->ucr;
+ int err;
+ u16 val;
+
+ if (host->host_removal)
+ return -ENOMEDIUM;
+
+ mutex_lock(&ucr->dev_mutex);
+
+ /* Check SD card detect */
+ err = rtsx_usb_get_card_status(ucr, &val);
+
+ mutex_unlock(&ucr->dev_mutex);
+
+ /* Treat failed detection as non-exist */
+ if (err)
+ goto no_card;
+
+ if (val & SD_CD) {
+ host->card_exist = true;
+ return 1;
+ }
+
+no_card:
+ host->card_exist = false;
+ return 0;
+}
+
+static void sdmmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct rtsx_usb_sdmmc *host = mmc_priv(mmc);
+ struct rtsx_ucr *ucr = host->ucr;
+ struct mmc_command *cmd = mrq->cmd;
+ struct mmc_data *data = mrq->data;
+ unsigned int data_size = 0;
+
+ dev_dbg(sdmmc_dev(host), "%s\n", __func__);
+
+ if (host->host_removal) {
+ cmd->error = -ENOMEDIUM;
+ goto finish;
+ }
+
+ if ((!host->card_exist)) {
+ cmd->error = -ENOMEDIUM;
+ goto finish_detect_card;
+ }
+
+ /*
+ * Reject SDIO CMDs to speed up card identification
+ * since unsupported
+ */
+ if (cmd->opcode == SD_IO_SEND_OP_COND ||
+ cmd->opcode == SD_IO_RW_DIRECT ||
+ cmd->opcode == SD_IO_RW_EXTENDED) {
+ cmd->error = -EINVAL;
+ goto finish;
+ }
+
+ mutex_lock(&ucr->dev_mutex);
+
+ mutex_lock(&host->host_mutex);
+ host->mrq = mrq;
+ mutex_unlock(&host->host_mutex);
+
+ if (mrq->data)
+ data_size = data->blocks * data->blksz;
+
+ if (!data_size) {
+ sd_send_cmd_get_rsp(host, cmd);
+ } else if ((!(data_size % 512) && cmd->opcode != MMC_SEND_EXT_CSD) ||
+ mmc_op_multi(cmd->opcode)) {
+ sd_send_cmd_get_rsp(host, cmd);
+
+ if (!cmd->error) {
+ sd_rw_multi(host, mrq);
+
+ if (mmc_op_multi(cmd->opcode) && mrq->stop) {
+ sd_send_cmd_get_rsp(host, mrq->stop);
+ rtsx_usb_write_register(ucr, MC_FIFO_CTL,
+ FIFO_FLUSH, FIFO_FLUSH);
+ }
+ }
+ } else {
+ sd_normal_rw(host, mrq);
+ }
+
+ if (mrq->data) {
+ if (cmd->error || data->error)
+ data->bytes_xfered = 0;
+ else
+ data->bytes_xfered = data->blocks * data->blksz;
+ }
+
+ mutex_unlock(&ucr->dev_mutex);
+
+finish_detect_card:
+ if (cmd->error) {
+ /*
+ * detect card when fail to update card existence state and
+ * speed up card removal when retry
+ */
+ sdmmc_get_cd(mmc);
+ dev_dbg(sdmmc_dev(host), "cmd->error = %d\n", cmd->error);
+ }
+
+finish:
+ mutex_lock(&host->host_mutex);
+ host->mrq = NULL;
+ mutex_unlock(&host->host_mutex);
+
+ mmc_request_done(mmc, mrq);
+}
+
+static int sd_set_bus_width(struct rtsx_usb_sdmmc *host,
+ unsigned char bus_width)
+{
+ int err = 0;
+ u8 width[] = {
+ [MMC_BUS_WIDTH_1] = SD_BUS_WIDTH_1BIT,
+ [MMC_BUS_WIDTH_4] = SD_BUS_WIDTH_4BIT,
+ [MMC_BUS_WIDTH_8] = SD_BUS_WIDTH_8BIT,
+ };
+
+ if (bus_width <= MMC_BUS_WIDTH_8)
+ err = rtsx_usb_write_register(host->ucr, SD_CFG1,
+ 0x03, width[bus_width]);
+
+ return err;
+}
+
+static int sd_pull_ctl_disable_lqfp48(struct rtsx_ucr *ucr)
+{
+ rtsx_usb_init_cmd(ucr);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x55);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x95);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x55);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0xA5);
+
+ return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+
+static int sd_pull_ctl_disable_qfn24(struct rtsx_ucr *ucr)
+{
+ rtsx_usb_init_cmd(ucr);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x65);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x95);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x56);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0x59);
+
+ return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+
+static int sd_pull_ctl_enable_lqfp48(struct rtsx_ucr *ucr)
+{
+ rtsx_usb_init_cmd(ucr);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0xAA);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0xAA);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0xA9);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x55);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0xA5);
+
+ return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+
+static int sd_pull_ctl_enable_qfn24(struct rtsx_ucr *ucr)
+{
+ rtsx_usb_init_cmd(ucr);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0xA5);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x9A);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0xA5);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x9A);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x65);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0x5A);
+
+ return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+
+static int sd_power_on(struct rtsx_usb_sdmmc *host)
+{
+ struct rtsx_ucr *ucr = host->ucr;
+ int err;
+
+ dev_dbg(sdmmc_dev(host), "%s\n", __func__);
+ rtsx_usb_init_cmd(ucr);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_SELECT, 0x07, SD_MOD_SEL);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_SHARE_MODE,
+ CARD_SHARE_MASK, CARD_SHARE_SD);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_EN,
+ SD_CLK_EN, SD_CLK_EN);
+ err = rtsx_usb_send_cmd(ucr, MODE_C, 100);
+ if (err)
+ return err;
+
+ if (CHECK_PKG(ucr, LQFP48))
+ err = sd_pull_ctl_enable_lqfp48(ucr);
+ else
+ err = sd_pull_ctl_enable_qfn24(ucr);
+ if (err)
+ return err;
+
+ err = rtsx_usb_write_register(ucr, CARD_PWR_CTL,
+ POWER_MASK, PARTIAL_POWER_ON);
+ if (err)
+ return err;
+
+ usleep_range(800, 1000);
+
+ rtsx_usb_init_cmd(ucr);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PWR_CTL,
+ POWER_MASK|LDO3318_PWR_MASK, POWER_ON|LDO_ON);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_OE,
+ SD_OUTPUT_EN, SD_OUTPUT_EN);
+
+ return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+
+static int sd_power_off(struct rtsx_usb_sdmmc *host)
+{
+ struct rtsx_ucr *ucr = host->ucr;
+ int err;
+
+ dev_dbg(sdmmc_dev(host), "%s\n", __func__);
+ rtsx_usb_init_cmd(ucr);
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_EN, SD_CLK_EN, 0);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_OE, SD_OUTPUT_EN, 0);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PWR_CTL,
+ POWER_MASK, POWER_OFF);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PWR_CTL,
+ POWER_MASK|LDO3318_PWR_MASK, POWER_OFF|LDO_SUSPEND);
+
+ err = rtsx_usb_send_cmd(ucr, MODE_C, 100);
+ if (err)
+ return err;
+
+ if (CHECK_PKG(ucr, LQFP48))
+ return sd_pull_ctl_disable_lqfp48(ucr);
+ return sd_pull_ctl_disable_qfn24(ucr);
+}
+
+static int sd_set_power_mode(struct rtsx_usb_sdmmc *host,
+ unsigned char power_mode)
+{
+ int err;
+
+ if (power_mode != MMC_POWER_OFF)
+ power_mode = MMC_POWER_ON;
+
+ if (power_mode == host->power_mode)
+ return 0;
+
+ if (power_mode == MMC_POWER_OFF) {
+ err = sd_power_off(host);
+ pm_runtime_put(sdmmc_dev(host));
+ } else {
+ pm_runtime_get_sync(sdmmc_dev(host));
+ err = sd_power_on(host);
+ }
+
+ if (!err)
+ host->power_mode = power_mode;
+
+ return err;
+}
+
+static int sd_set_timing(struct rtsx_usb_sdmmc *host,
+ unsigned char timing, bool *ddr_mode)
+{
+ struct rtsx_ucr *ucr = host->ucr;
+ int err;
+
+ *ddr_mode = false;
+
+ rtsx_usb_init_cmd(ucr);
+
+ switch (timing) {
+ case MMC_TIMING_UHS_SDR104:
+ case MMC_TIMING_UHS_SDR50:
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG1,
+ 0x0C | SD_ASYNC_FIFO_RST,
+ SD_30_MODE | SD_ASYNC_FIFO_RST);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF,
+ CRC_VAR_CLK0 | SD30_FIX_CLK | SAMPLE_VAR_CLK1);
+ break;
+
+ case MMC_TIMING_UHS_DDR50:
+ *ddr_mode = true;
+
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG1,
+ 0x0C | SD_ASYNC_FIFO_RST,
+ SD_DDR_MODE | SD_ASYNC_FIFO_RST);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF,
+ CRC_VAR_CLK0 | SD30_FIX_CLK | SAMPLE_VAR_CLK1);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_PUSH_POINT_CTL,
+ DDR_VAR_TX_CMD_DAT, DDR_VAR_TX_CMD_DAT);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_SAMPLE_POINT_CTL,
+ DDR_VAR_RX_DAT | DDR_VAR_RX_CMD,
+ DDR_VAR_RX_DAT | DDR_VAR_RX_CMD);
+ break;
+
+ case MMC_TIMING_MMC_HS:
+ case MMC_TIMING_SD_HS:
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG1,
+ 0x0C, SD_20_MODE);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF,
+ CRC_FIX_CLK | SD30_VAR_CLK0 | SAMPLE_VAR_CLK1);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_PUSH_POINT_CTL,
+ SD20_TX_SEL_MASK, SD20_TX_14_AHEAD);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_SAMPLE_POINT_CTL,
+ SD20_RX_SEL_MASK, SD20_RX_14_DELAY);
+ break;
+
+ default:
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+ SD_CFG1, 0x0C, SD_20_MODE);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF,
+ CRC_FIX_CLK | SD30_VAR_CLK0 | SAMPLE_VAR_CLK1);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+ SD_PUSH_POINT_CTL, 0xFF, 0);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_SAMPLE_POINT_CTL,
+ SD20_RX_SEL_MASK, SD20_RX_POS_EDGE);
+ break;
+ }
+
+ err = rtsx_usb_send_cmd(ucr, MODE_C, 100);
+
+ return err;
+}
+
+static void sdmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct rtsx_usb_sdmmc *host = mmc_priv(mmc);
+ struct rtsx_ucr *ucr = host->ucr;
+
+ dev_dbg(sdmmc_dev(host), "%s\n", __func__);
+ mutex_lock(&ucr->dev_mutex);
+
+ if (rtsx_usb_card_exclusive_check(ucr, RTSX_USB_SD_CARD)) {
+ mutex_unlock(&ucr->dev_mutex);
+ return;
+ }
+
+ sd_set_power_mode(host, ios->power_mode);
+ sd_set_bus_width(host, ios->bus_width);
+ sd_set_timing(host, ios->timing, &host->ddr_mode);
+
+ host->vpclk = false;
+ host->double_clk = true;
+
+ switch (ios->timing) {
+ case MMC_TIMING_UHS_SDR104:
+ case MMC_TIMING_UHS_SDR50:
+ host->ssc_depth = SSC_DEPTH_2M;
+ host->vpclk = true;
+ host->double_clk = false;
+ break;
+ case MMC_TIMING_UHS_DDR50:
+ case MMC_TIMING_UHS_SDR25:
+ host->ssc_depth = SSC_DEPTH_1M;
+ break;
+ default:
+ host->ssc_depth = SSC_DEPTH_512K;
+ break;
+ }
+
+ host->initial_mode = (ios->clock <= 1000000) ? true : false;
+ host->clock = ios->clock;
+
+ rtsx_usb_switch_clock(host->ucr, host->clock, host->ssc_depth,
+ host->initial_mode, host->double_clk, host->vpclk);
+
+ mutex_unlock(&ucr->dev_mutex);
+ dev_dbg(sdmmc_dev(host), "%s end\n", __func__);
+}
+
+static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct rtsx_usb_sdmmc *host = mmc_priv(mmc);
+ struct rtsx_ucr *ucr = host->ucr;
+ int err = 0;
+
+ dev_dbg(sdmmc_dev(host), "%s: signal_voltage = %d\n",
+ __func__, ios->signal_voltage);
+
+ if (host->host_removal)
+ return -ENOMEDIUM;
+
+ if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_120)
+ return -EPERM;
+
+ mutex_lock(&ucr->dev_mutex);
+
+ err = rtsx_usb_card_exclusive_check(ucr, RTSX_USB_SD_CARD);
+ if (err) {
+ mutex_unlock(&ucr->dev_mutex);
+ return err;
+ }
+
+ /* Let mmc core do the busy checking, simply stop the forced-toggle
+ * clock(while issuing CMD11) and switch voltage.
+ */
+ rtsx_usb_init_cmd(ucr);
+
+ if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_PAD_CTL,
+ SD_IO_USING_1V8, SD_IO_USING_3V3);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, LDO_POWER_CFG,
+ TUNE_SD18_MASK, TUNE_SD18_3V3);
+ } else {
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BUS_STAT,
+ SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP,
+ SD_CLK_FORCE_STOP);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_PAD_CTL,
+ SD_IO_USING_1V8, SD_IO_USING_1V8);
+ rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, LDO_POWER_CFG,
+ TUNE_SD18_MASK, TUNE_SD18_1V8);
+ }
+
+ err = rtsx_usb_send_cmd(ucr, MODE_C, 100);
+ mutex_unlock(&ucr->dev_mutex);
+
+ return err;
+}
+
+static int sdmmc_card_busy(struct mmc_host *mmc)
+{
+ struct rtsx_usb_sdmmc *host = mmc_priv(mmc);
+ struct rtsx_ucr *ucr = host->ucr;
+ int err;
+ u8 stat;
+ u8 mask = SD_DAT3_STATUS | SD_DAT2_STATUS | SD_DAT1_STATUS
+ | SD_DAT0_STATUS;
+
+ dev_dbg(sdmmc_dev(host), "%s\n", __func__);
+
+ mutex_lock(&ucr->dev_mutex);
+
+ err = rtsx_usb_write_register(ucr, SD_BUS_STAT,
+ SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP,
+ SD_CLK_TOGGLE_EN);
+ if (err)
+ goto out;
+
+ mdelay(1);
+
+ err = rtsx_usb_read_register(ucr, SD_BUS_STAT, &stat);
+ if (err)
+ goto out;
+
+ err = rtsx_usb_write_register(ucr, SD_BUS_STAT,
+ SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0);
+out:
+ mutex_unlock(&ucr->dev_mutex);
+
+ if (err)
+ return err;
+
+ /* check if any pin between dat[0:3] is low */
+ if ((stat & mask) != mask)
+ return 1;
+ else
+ return 0;
+}
+
+static int sdmmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+ struct rtsx_usb_sdmmc *host = mmc_priv(mmc);
+ struct rtsx_ucr *ucr = host->ucr;
+ int err = 0;
+
+ if (host->host_removal)
+ return -ENOMEDIUM;
+
+ mutex_lock(&ucr->dev_mutex);
+
+ if (!host->ddr_mode)
+ err = sd_tuning_rx(host, MMC_SEND_TUNING_BLOCK);
+
+ mutex_unlock(&ucr->dev_mutex);
+
+ return err;
+}
+
+static const struct mmc_host_ops rtsx_usb_sdmmc_ops = {
+ .request = sdmmc_request,
+ .set_ios = sdmmc_set_ios,
+ .get_ro = sdmmc_get_ro,
+ .get_cd = sdmmc_get_cd,
+ .start_signal_voltage_switch = sdmmc_switch_voltage,
+ .card_busy = sdmmc_card_busy,
+ .execute_tuning = sdmmc_execute_tuning,
+};
+
+#ifdef RTSX_USB_USE_LEDS_CLASS
+static void rtsx_usb_led_control(struct led_classdev *led,
+ enum led_brightness brightness)
+{
+ struct rtsx_usb_sdmmc *host = container_of(led,
+ struct rtsx_usb_sdmmc, led);
+
+ if (host->host_removal)
+ return;
+
+ host->led.brightness = brightness;
+ schedule_work(&host->led_work);
+}
+
+static void rtsx_usb_update_led(struct work_struct *work)
+{
+ struct rtsx_usb_sdmmc *host =
+ container_of(work, struct rtsx_usb_sdmmc, led_work);
+ struct rtsx_ucr *ucr = host->ucr;
+
+ mutex_lock(&ucr->dev_mutex);
+
+ if (host->led.brightness == LED_OFF)
+ rtsx_usb_turn_off_led(ucr);
+ else
+ rtsx_usb_turn_on_led(ucr);
+
+ mutex_unlock(&ucr->dev_mutex);
+}
+#endif
+
+static void rtsx_usb_init_host(struct rtsx_usb_sdmmc *host)
+{
+ struct mmc_host *mmc = host->mmc;
+
+ mmc->f_min = 250000;
+ mmc->f_max = 208000000;
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_BUS_WIDTH_TEST |
+ MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_SDR50 |
+ MMC_CAP_NEEDS_POLL;
+
+ mmc->max_current_330 = 400;
+ mmc->max_current_180 = 800;
+ mmc->ops = &rtsx_usb_sdmmc_ops;
+ mmc->max_segs = 256;
+ mmc->max_seg_size = 65536;
+ mmc->max_blk_size = 512;
+ mmc->max_blk_count = 65535;
+ mmc->max_req_size = 524288;
+
+ host->power_mode = MMC_POWER_OFF;
+}
+
+static int rtsx_usb_sdmmc_drv_probe(struct platform_device *pdev)
+{
+ struct mmc_host *mmc;
+ struct rtsx_usb_sdmmc *host;
+ struct rtsx_ucr *ucr;
+#ifdef RTSX_USB_USE_LEDS_CLASS
+ int err;
+#endif
+
+ ucr = usb_get_intfdata(to_usb_interface(pdev->dev.parent));
+ if (!ucr)
+ return -ENXIO;
+
+ dev_dbg(&(pdev->dev), ": Realtek USB SD/MMC controller found\n");
+
+ mmc = mmc_alloc_host(sizeof(*host), &pdev->dev);
+ if (!mmc)
+ return -ENOMEM;
+
+ host = mmc_priv(mmc);
+ host->ucr = ucr;
+ host->mmc = mmc;
+ host->pdev = pdev;
+ platform_set_drvdata(pdev, host);
+
+ mutex_init(&host->host_mutex);
+ rtsx_usb_init_host(host);
+ pm_runtime_enable(&pdev->dev);
+
+#ifdef RTSX_USB_USE_LEDS_CLASS
+ snprintf(host->led_name, sizeof(host->led_name),
+ "%s::", mmc_hostname(mmc));
+ host->led.name = host->led_name;
+ host->led.brightness = LED_OFF;
+ host->led.default_trigger = mmc_hostname(mmc);
+ host->led.brightness_set = rtsx_usb_led_control;
+
+ err = led_classdev_register(mmc_dev(mmc), &host->led);
+ if (err)
+ dev_err(&(pdev->dev),
+ "Failed to register LED device: %d\n", err);
+ INIT_WORK(&host->led_work, rtsx_usb_update_led);
+
+#endif
+ mmc_add_host(mmc);
+
+ return 0;
+}
+
+static int rtsx_usb_sdmmc_drv_remove(struct platform_device *pdev)
+{
+ struct rtsx_usb_sdmmc *host = platform_get_drvdata(pdev);
+ struct mmc_host *mmc;
+
+ if (!host)
+ return 0;
+
+ mmc = host->mmc;
+ host->host_removal = true;
+
+ mutex_lock(&host->host_mutex);
+ if (host->mrq) {
+ dev_dbg(&(pdev->dev),
+ "%s: Controller removed during transfer\n",
+ mmc_hostname(mmc));
+ host->mrq->cmd->error = -ENOMEDIUM;
+ if (host->mrq->stop)
+ host->mrq->stop->error = -ENOMEDIUM;
+ mmc_request_done(mmc, host->mrq);
+ }
+ mutex_unlock(&host->host_mutex);
+
+ mmc_remove_host(mmc);
+
+#ifdef RTSX_USB_USE_LEDS_CLASS
+ cancel_work_sync(&host->led_work);
+ led_classdev_unregister(&host->led);
+#endif
+
+ mmc_free_host(mmc);
+ pm_runtime_disable(&pdev->dev);
+ platform_set_drvdata(pdev, NULL);
+
+ dev_dbg(&(pdev->dev),
+ ": Realtek USB SD/MMC module has been removed\n");
+
+ return 0;
+}
+
+static struct platform_device_id rtsx_usb_sdmmc_ids[] = {
+ {
+ .name = "rtsx_usb_sdmmc",
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, rtsx_usb_sdmmc_ids);
+
+static struct platform_driver rtsx_usb_sdmmc_driver = {
+ .probe = rtsx_usb_sdmmc_drv_probe,
+ .remove = rtsx_usb_sdmmc_drv_remove,
+ .id_table = rtsx_usb_sdmmc_ids,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "rtsx_usb_sdmmc",
+ },
+};
+module_platform_driver(rtsx_usb_sdmmc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Roger Tseng <rogerable@realtek.com>");
+MODULE_DESCRIPTION("Realtek USB SD/MMC Card Host Driver");
diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c
index 476af93543f6..8ec2d6a1dbe1 100644
--- a/drivers/rtc/rtc-s5m.c
+++ b/drivers/rtc/rtc-s5m.c
@@ -40,6 +40,7 @@
struct s5m_rtc_info {
struct device *dev;
+ struct i2c_client *i2c;
struct sec_pmic_dev *s5m87xx;
struct regmap *regmap;
struct rtc_device *rtc_dev;
@@ -49,6 +50,20 @@ struct s5m_rtc_info {
bool wtsr_smpl;
};
+static const struct regmap_config s5m_rtc_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = SEC_RTC_REG_MAX,
+};
+
+static const struct regmap_config s2mps14_rtc_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = S2MPS_RTC_REG_MAX,
+};
+
static void s5m8767_data_to_tm(u8 *data, struct rtc_time *tm,
int rtc_24hr_mode)
{
@@ -554,6 +569,7 @@ static int s5m_rtc_probe(struct platform_device *pdev)
struct sec_pmic_dev *s5m87xx = dev_get_drvdata(pdev->dev.parent);
struct sec_platform_data *pdata = s5m87xx->pdata;
struct s5m_rtc_info *info;
+ const struct regmap_config *regmap_cfg;
int ret;
if (!pdata) {
@@ -565,9 +581,37 @@ static int s5m_rtc_probe(struct platform_device *pdev)
if (!info)
return -ENOMEM;
+ switch (pdata->device_type) {
+ case S2MPS14X:
+ regmap_cfg = &s2mps14_rtc_regmap_config;
+ break;
+ case S5M8763X:
+ regmap_cfg = &s5m_rtc_regmap_config;
+ break;
+ case S5M8767X:
+ regmap_cfg = &s5m_rtc_regmap_config;
+ break;
+ default:
+ dev_err(&pdev->dev, "Device type is not supported by RTC driver\n");
+ return -ENODEV;
+ }
+
+ info->i2c = i2c_new_dummy(s5m87xx->i2c->adapter, RTC_I2C_ADDR);
+ if (!info->i2c) {
+ dev_err(&pdev->dev, "Failed to allocate I2C for RTC\n");
+ return -ENODEV;
+ }
+
+ info->regmap = devm_regmap_init_i2c(info->i2c, regmap_cfg);
+ if (IS_ERR(info->regmap)) {
+ ret = PTR_ERR(info->regmap);
+ dev_err(&pdev->dev, "Failed to allocate RTC register map: %d\n",
+ ret);
+ goto err;
+ }
+
info->dev = &pdev->dev;
info->s5m87xx = s5m87xx;
- info->regmap = s5m87xx->regmap_rtc;
info->device_type = s5m87xx->device_type;
info->wtsr_smpl = s5m87xx->wtsr_smpl;
@@ -585,7 +629,7 @@ static int s5m_rtc_probe(struct platform_device *pdev)
default:
ret = -EINVAL;
dev_err(&pdev->dev, "Unsupported device type: %d\n", ret);
- return ret;
+ goto err;
}
platform_set_drvdata(pdev, info);
@@ -602,15 +646,24 @@ static int s5m_rtc_probe(struct platform_device *pdev)
info->rtc_dev = devm_rtc_device_register(&pdev->dev, "s5m-rtc",
&s5m_rtc_ops, THIS_MODULE);
- if (IS_ERR(info->rtc_dev))
- return PTR_ERR(info->rtc_dev);
+ if (IS_ERR(info->rtc_dev)) {
+ ret = PTR_ERR(info->rtc_dev);
+ goto err;
+ }
ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
s5m_rtc_alarm_irq, 0, "rtc-alarm0",
info);
- if (ret < 0)
+ if (ret < 0) {
dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
info->irq, ret);
+ goto err;
+ }
+
+ return 0;
+
+err:
+ i2c_unregister_device(info->i2c);
return ret;
}
@@ -639,6 +692,17 @@ static void s5m_rtc_shutdown(struct platform_device *pdev)
s5m_rtc_enable_smpl(info, false);
}
+static int s5m_rtc_remove(struct platform_device *pdev)
+{
+ struct s5m_rtc_info *info = platform_get_drvdata(pdev);
+
+ /* Perform also all shutdown steps when removing */
+ s5m_rtc_shutdown(pdev);
+ i2c_unregister_device(info->i2c);
+
+ return 0;
+}
+
#ifdef CONFIG_PM_SLEEP
static int s5m_rtc_resume(struct device *dev)
{
@@ -676,6 +740,7 @@ static struct platform_driver s5m_rtc_driver = {
.pm = &s5m_rtc_pm_ops,
},
.probe = s5m_rtc_probe,
+ .remove = s5m_rtc_remove,
.shutdown = s5m_rtc_shutdown,
.id_table = s5m_rtc_id,
};
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index 3301b2031c8d..552cc1d61cc7 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -330,7 +330,6 @@ int abx500_mask_and_set_register_interruptible(struct device *dev, u8 bank,
int abx500_get_chip_id(struct device *dev);
int abx500_event_registers_startup_state_get(struct device *dev, u8 *event);
int abx500_startup_irq_enabled(struct device *dev, unsigned int irq);
-void abx500_dump_all_banks(void);
struct abx500_ops {
int (*get_chip_id) (struct device *);
diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h
index 7b35c21170d5..7204d8138b24 100644
--- a/include/linux/mfd/arizona/registers.h
+++ b/include/linux/mfd/arizona/registers.h
@@ -42,12 +42,14 @@
#define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_2 0x62
#define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_3 0x63
#define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_4 0x64
-#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_1 0x68
-#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_2 0x69
-#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_3 0x6A
-#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_4 0x6B
-#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_5 0x6C
-#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_6 0x6D
+#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_1 0x66
+#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_2 0x67
+#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_3 0x68
+#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_4 0x69
+#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_5 0x6A
+#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_6 0x6B
+#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_7 0x6C
+#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_8 0x6D
#define ARIZONA_COMFORT_NOISE_GENERATOR 0x70
#define ARIZONA_HAPTICS_CONTROL_1 0x90
#define ARIZONA_HAPTICS_CONTROL_2 0x91
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
new file mode 100644
index 000000000000..d0e31a2287ac
--- /dev/null
+++ b/include/linux/mfd/axp20x.h
@@ -0,0 +1,180 @@
+/*
+ * Functions and registers to access AXP20X power management chip.
+ *
+ * Copyright (C) 2013, Carlo Caione <carlo@caione.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_MFD_AXP20X_H
+#define __LINUX_MFD_AXP20X_H
+
+enum {
+ AXP202_ID = 0,
+ AXP209_ID,
+};
+
+#define AXP20X_DATACACHE(m) (0x04 + (m))
+
+/* Power supply */
+#define AXP20X_PWR_INPUT_STATUS 0x00
+#define AXP20X_PWR_OP_MODE 0x01
+#define AXP20X_USB_OTG_STATUS 0x02
+#define AXP20X_PWR_OUT_CTRL 0x12
+#define AXP20X_DCDC2_V_OUT 0x23
+#define AXP20X_DCDC2_LDO3_V_SCAL 0x25
+#define AXP20X_DCDC3_V_OUT 0x27
+#define AXP20X_LDO24_V_OUT 0x28
+#define AXP20X_LDO3_V_OUT 0x29
+#define AXP20X_VBUS_IPSOUT_MGMT 0x30
+#define AXP20X_V_OFF 0x31
+#define AXP20X_OFF_CTRL 0x32
+#define AXP20X_CHRG_CTRL1 0x33
+#define AXP20X_CHRG_CTRL2 0x34
+#define AXP20X_CHRG_BAK_CTRL 0x35
+#define AXP20X_PEK_KEY 0x36
+#define AXP20X_DCDC_FREQ 0x37
+#define AXP20X_V_LTF_CHRG 0x38
+#define AXP20X_V_HTF_CHRG 0x39
+#define AXP20X_APS_WARN_L1 0x3a
+#define AXP20X_APS_WARN_L2 0x3b
+#define AXP20X_V_LTF_DISCHRG 0x3c
+#define AXP20X_V_HTF_DISCHRG 0x3d
+
+/* Interrupt */
+#define AXP20X_IRQ1_EN 0x40
+#define AXP20X_IRQ2_EN 0x41
+#define AXP20X_IRQ3_EN 0x42
+#define AXP20X_IRQ4_EN 0x43
+#define AXP20X_IRQ5_EN 0x44
+#define AXP20X_IRQ1_STATE 0x48
+#define AXP20X_IRQ2_STATE 0x49
+#define AXP20X_IRQ3_STATE 0x4a
+#define AXP20X_IRQ4_STATE 0x4b
+#define AXP20X_IRQ5_STATE 0x4c
+
+/* ADC */
+#define AXP20X_ACIN_V_ADC_H 0x56
+#define AXP20X_ACIN_V_ADC_L 0x57
+#define AXP20X_ACIN_I_ADC_H 0x58
+#define AXP20X_ACIN_I_ADC_L 0x59
+#define AXP20X_VBUS_V_ADC_H 0x5a
+#define AXP20X_VBUS_V_ADC_L 0x5b
+#define AXP20X_VBUS_I_ADC_H 0x5c
+#define AXP20X_VBUS_I_ADC_L 0x5d
+#define AXP20X_TEMP_ADC_H 0x5e
+#define AXP20X_TEMP_ADC_L 0x5f
+#define AXP20X_TS_IN_H 0x62
+#define AXP20X_TS_IN_L 0x63
+#define AXP20X_GPIO0_V_ADC_H 0x64
+#define AXP20X_GPIO0_V_ADC_L 0x65
+#define AXP20X_GPIO1_V_ADC_H 0x66
+#define AXP20X_GPIO1_V_ADC_L 0x67
+#define AXP20X_PWR_BATT_H 0x70
+#define AXP20X_PWR_BATT_M 0x71
+#define AXP20X_PWR_BATT_L 0x72
+#define AXP20X_BATT_V_H 0x78
+#define AXP20X_BATT_V_L 0x79
+#define AXP20X_BATT_CHRG_I_H 0x7a
+#define AXP20X_BATT_CHRG_I_L 0x7b
+#define AXP20X_BATT_DISCHRG_I_H 0x7c
+#define AXP20X_BATT_DISCHRG_I_L 0x7d
+#define AXP20X_IPSOUT_V_HIGH_H 0x7e
+#define AXP20X_IPSOUT_V_HIGH_L 0x7f
+
+/* Power supply */
+#define AXP20X_DCDC_MODE 0x80
+#define AXP20X_ADC_EN1 0x82
+#define AXP20X_ADC_EN2 0x83
+#define AXP20X_ADC_RATE 0x84
+#define AXP20X_GPIO10_IN_RANGE 0x85
+#define AXP20X_GPIO1_ADC_IRQ_RIS 0x86
+#define AXP20X_GPIO1_ADC_IRQ_FAL 0x87
+#define AXP20X_TIMER_CTRL 0x8a
+#define AXP20X_VBUS_MON 0x8b
+#define AXP20X_OVER_TMP 0x8f
+
+/* GPIO */
+#define AXP20X_GPIO0_CTRL 0x90
+#define AXP20X_LDO5_V_OUT 0x91
+#define AXP20X_GPIO1_CTRL 0x92
+#define AXP20X_GPIO2_CTRL 0x93
+#define AXP20X_GPIO20_SS 0x94
+#define AXP20X_GPIO3_CTRL 0x95
+
+/* Battery */
+#define AXP20X_CHRG_CC_31_24 0xb0
+#define AXP20X_CHRG_CC_23_16 0xb1
+#define AXP20X_CHRG_CC_15_8 0xb2
+#define AXP20X_CHRG_CC_7_0 0xb3
+#define AXP20X_DISCHRG_CC_31_24 0xb4
+#define AXP20X_DISCHRG_CC_23_16 0xb5
+#define AXP20X_DISCHRG_CC_15_8 0xb6
+#define AXP20X_DISCHRG_CC_7_0 0xb7
+#define AXP20X_CC_CTRL 0xb8
+#define AXP20X_FG_RES 0xb9
+
+/* Regulators IDs */
+enum {
+ AXP20X_LDO1 = 0,
+ AXP20X_LDO2,
+ AXP20X_LDO3,
+ AXP20X_LDO4,
+ AXP20X_LDO5,
+ AXP20X_DCDC2,
+ AXP20X_DCDC3,
+ AXP20X_REG_ID_MAX,
+};
+
+/* IRQs */
+enum {
+ AXP20X_IRQ_ACIN_OVER_V = 1,
+ AXP20X_IRQ_ACIN_PLUGIN,
+ AXP20X_IRQ_ACIN_REMOVAL,
+ AXP20X_IRQ_VBUS_OVER_V,
+ AXP20X_IRQ_VBUS_PLUGIN,
+ AXP20X_IRQ_VBUS_REMOVAL,
+ AXP20X_IRQ_VBUS_V_LOW,
+ AXP20X_IRQ_BATT_PLUGIN,
+ AXP20X_IRQ_BATT_REMOVAL,
+ AXP20X_IRQ_BATT_ENT_ACT_MODE,
+ AXP20X_IRQ_BATT_EXIT_ACT_MODE,
+ AXP20X_IRQ_CHARG,
+ AXP20X_IRQ_CHARG_DONE,
+ AXP20X_IRQ_BATT_TEMP_HIGH,
+ AXP20X_IRQ_BATT_TEMP_LOW,
+ AXP20X_IRQ_DIE_TEMP_HIGH,
+ AXP20X_IRQ_CHARG_I_LOW,
+ AXP20X_IRQ_DCDC1_V_LONG,
+ AXP20X_IRQ_DCDC2_V_LONG,
+ AXP20X_IRQ_DCDC3_V_LONG,
+ AXP20X_IRQ_PEK_SHORT = 22,
+ AXP20X_IRQ_PEK_LONG,
+ AXP20X_IRQ_N_OE_PWR_ON,
+ AXP20X_IRQ_N_OE_PWR_OFF,
+ AXP20X_IRQ_VBUS_VALID,
+ AXP20X_IRQ_VBUS_NOT_VALID,
+ AXP20X_IRQ_VBUS_SESS_VALID,
+ AXP20X_IRQ_VBUS_SESS_END,
+ AXP20X_IRQ_LOW_PWR_LVL1,
+ AXP20X_IRQ_LOW_PWR_LVL2,
+ AXP20X_IRQ_TIMER,
+ AXP20X_IRQ_PEK_RIS_EDGE,
+ AXP20X_IRQ_PEK_FAL_EDGE,
+ AXP20X_IRQ_GPIO3_INPUT,
+ AXP20X_IRQ_GPIO2_INPUT,
+ AXP20X_IRQ_GPIO1_INPUT,
+ AXP20X_IRQ_GPIO0_INPUT,
+};
+
+struct axp20x_dev {
+ struct device *dev;
+ struct i2c_client *i2c_client;
+ struct regmap *regmap;
+ struct regmap_irq_chip_data *regmap_irqc;
+ long variant;
+};
+
+#endif /* __LINUX_MFD_AXP20X_H */
diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
index 032af7fc5b2e..887ef4f7bef7 100644
--- a/include/linux/mfd/cros_ec.h
+++ b/include/linux/mfd/cros_ec.h
@@ -29,8 +29,8 @@ enum {
EC_MSG_RX_PROTO_BYTES = 3,
/* Max length of messages */
- EC_MSG_BYTES = EC_HOST_PARAM_SIZE + EC_MSG_TX_PROTO_BYTES,
-
+ EC_MSG_BYTES = EC_PROTO2_MAX_PARAM_SIZE +
+ EC_MSG_TX_PROTO_BYTES,
};
/**
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 86fd06953bcd..7853a6410d14 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -24,25 +24,12 @@
#define __CROS_EC_COMMANDS_H
/*
- * Protocol overview
+ * Current version of this protocol
*
- * request: CMD [ P0 P1 P2 ... Pn S ]
- * response: ERR [ P0 P1 P2 ... Pn S ]
- *
- * where the bytes are defined as follow :
- * - CMD is the command code. (defined by EC_CMD_ constants)
- * - ERR is the error code. (defined by EC_RES_ constants)
- * - Px is the optional payload.
- * it is not sent if the error code is not success.
- * (defined by ec_params_ and ec_response_ structures)
- * - S is the checksum which is the sum of all payload bytes.
- *
- * On LPC, CMD and ERR are sent/received at EC_LPC_ADDR_KERNEL|USER_CMD
- * and the payloads are sent/received at EC_LPC_ADDR_KERNEL|USER_PARAM.
- * On I2C, all bytes are sent serially in the same message.
+ * TODO(crosbug.com/p/11223): This is effectively useless; protocol is
+ * determined in other ways. Remove this once the kernel code no longer
+ * depends on it.
*/
-
-/* Current version of this protocol */
#define EC_PROTO_VERSION 0x00000002
/* Command version mask */
@@ -57,13 +44,19 @@
#define EC_LPC_ADDR_HOST_CMD 0x204
/* I/O addresses for host command args and params */
-#define EC_LPC_ADDR_HOST_ARGS 0x800
-#define EC_LPC_ADDR_HOST_PARAM 0x804
-#define EC_HOST_PARAM_SIZE 0x0fc /* Size of param area in bytes */
-
-/* I/O addresses for host command params, old interface */
-#define EC_LPC_ADDR_OLD_PARAM 0x880
-#define EC_OLD_PARAM_SIZE 0x080 /* Size of param area in bytes */
+/* Protocol version 2 */
+#define EC_LPC_ADDR_HOST_ARGS 0x800 /* And 0x801, 0x802, 0x803 */
+#define EC_LPC_ADDR_HOST_PARAM 0x804 /* For version 2 params; size is
+ * EC_PROTO2_MAX_PARAM_SIZE */
+/* Protocol version 3 */
+#define EC_LPC_ADDR_HOST_PACKET 0x800 /* Offset of version 3 packet */
+#define EC_LPC_HOST_PACKET_SIZE 0x100 /* Max size of version 3 packet */
+
+/* The actual block is 0x800-0x8ff, but some BIOSes think it's 0x880-0x8ff
+ * and they tell the kernel that so we have to think of it as two parts. */
+#define EC_HOST_CMD_REGION0 0x800
+#define EC_HOST_CMD_REGION1 0x880
+#define EC_HOST_CMD_REGION_SIZE 0x80
/* EC command register bit functions */
#define EC_LPC_CMDR_DATA (1 << 0) /* Data ready for host to read */
@@ -79,18 +72,22 @@
#define EC_MEMMAP_TEXT_MAX 8 /* Size of a string in the memory map */
/* The offset address of each type of data in mapped memory. */
-#define EC_MEMMAP_TEMP_SENSOR 0x00 /* Temp sensors */
-#define EC_MEMMAP_FAN 0x10 /* Fan speeds */
-#define EC_MEMMAP_TEMP_SENSOR_B 0x18 /* Temp sensors (second set) */
-#define EC_MEMMAP_ID 0x20 /* 'E' 'C' */
+#define EC_MEMMAP_TEMP_SENSOR 0x00 /* Temp sensors 0x00 - 0x0f */
+#define EC_MEMMAP_FAN 0x10 /* Fan speeds 0x10 - 0x17 */
+#define EC_MEMMAP_TEMP_SENSOR_B 0x18 /* More temp sensors 0x18 - 0x1f */
+#define EC_MEMMAP_ID 0x20 /* 0x20 == 'E', 0x21 == 'C' */
#define EC_MEMMAP_ID_VERSION 0x22 /* Version of data in 0x20 - 0x2f */
#define EC_MEMMAP_THERMAL_VERSION 0x23 /* Version of data in 0x00 - 0x1f */
#define EC_MEMMAP_BATTERY_VERSION 0x24 /* Version of data in 0x40 - 0x7f */
#define EC_MEMMAP_SWITCHES_VERSION 0x25 /* Version of data in 0x30 - 0x33 */
#define EC_MEMMAP_EVENTS_VERSION 0x26 /* Version of data in 0x34 - 0x3f */
-#define EC_MEMMAP_HOST_CMD_FLAGS 0x27 /* Host command interface flags */
-#define EC_MEMMAP_SWITCHES 0x30
-#define EC_MEMMAP_HOST_EVENTS 0x34
+#define EC_MEMMAP_HOST_CMD_FLAGS 0x27 /* Host cmd interface flags (8 bits) */
+/* Unused 0x28 - 0x2f */
+#define EC_MEMMAP_SWITCHES 0x30 /* 8 bits */
+/* Unused 0x31 - 0x33 */
+#define EC_MEMMAP_HOST_EVENTS 0x34 /* 32 bits */
+/* Reserve 0x38 - 0x3f for additional host event-related stuff */
+/* Battery values are all 32 bits */
#define EC_MEMMAP_BATT_VOLT 0x40 /* Battery Present Voltage */
#define EC_MEMMAP_BATT_RATE 0x44 /* Battery Present Rate */
#define EC_MEMMAP_BATT_CAP 0x48 /* Battery Remaining Capacity */
@@ -99,10 +96,24 @@
#define EC_MEMMAP_BATT_DVLT 0x54 /* Battery Design Voltage */
#define EC_MEMMAP_BATT_LFCC 0x58 /* Battery Last Full Charge Capacity */
#define EC_MEMMAP_BATT_CCNT 0x5c /* Battery Cycle Count */
+/* Strings are all 8 bytes (EC_MEMMAP_TEXT_MAX) */
#define EC_MEMMAP_BATT_MFGR 0x60 /* Battery Manufacturer String */
#define EC_MEMMAP_BATT_MODEL 0x68 /* Battery Model Number String */
#define EC_MEMMAP_BATT_SERIAL 0x70 /* Battery Serial Number String */
#define EC_MEMMAP_BATT_TYPE 0x78 /* Battery Type String */
+#define EC_MEMMAP_ALS 0x80 /* ALS readings in lux (2 X 16 bits) */
+/* Unused 0x84 - 0x8f */
+#define EC_MEMMAP_ACC_STATUS 0x90 /* Accelerometer status (8 bits )*/
+/* Unused 0x91 */
+#define EC_MEMMAP_ACC_DATA 0x92 /* Accelerometer data 0x92 - 0x9f */
+#define EC_MEMMAP_GYRO_DATA 0xa0 /* Gyroscope data 0xa0 - 0xa5 */
+/* Unused 0xa6 - 0xfe (remember, 0xff is NOT part of the memmap region) */
+
+
+/* Define the format of the accelerometer mapped memory status byte. */
+#define EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK 0x0f
+#define EC_MEMMAP_ACC_STATUS_BUSY_BIT (1 << 4)
+#define EC_MEMMAP_ACC_STATUS_PRESENCE_BIT (1 << 7)
/* Number of temp sensors at EC_MEMMAP_TEMP_SENSOR */
#define EC_TEMP_SENSOR_ENTRIES 16
@@ -112,6 +123,8 @@
* Valid only if EC_MEMMAP_THERMAL_VERSION returns >= 2.
*/
#define EC_TEMP_SENSOR_B_ENTRIES 8
+
+/* Special values for mapped temperature sensors */
#define EC_TEMP_SENSOR_NOT_PRESENT 0xff
#define EC_TEMP_SENSOR_ERROR 0xfe
#define EC_TEMP_SENSOR_NOT_POWERED 0xfd
@@ -122,6 +135,18 @@
*/
#define EC_TEMP_SENSOR_OFFSET 200
+/*
+ * Number of ALS readings at EC_MEMMAP_ALS
+ */
+#define EC_ALS_ENTRIES 2
+
+/*
+ * The default value a temperature sensor will return when it is present but
+ * has not been read this boot. This is a reasonable number to avoid
+ * triggering alarms on the host.
+ */
+#define EC_TEMP_SENSOR_DEFAULT (296 - EC_TEMP_SENSOR_OFFSET)
+
#define EC_FAN_SPEED_ENTRIES 4 /* Number of fans at EC_MEMMAP_FAN */
#define EC_FAN_SPEED_NOT_PRESENT 0xffff /* Entry not present */
#define EC_FAN_SPEED_STALLED 0xfffe /* Fan stalled */
@@ -137,8 +162,8 @@
#define EC_SWITCH_LID_OPEN 0x01
#define EC_SWITCH_POWER_BUTTON_PRESSED 0x02
#define EC_SWITCH_WRITE_PROTECT_DISABLED 0x04
-/* Recovery requested via keyboard */
-#define EC_SWITCH_KEYBOARD_RECOVERY 0x08
+/* Was recovery requested via keyboard; now unused. */
+#define EC_SWITCH_IGNORE1 0x08
/* Recovery requested via dedicated signal (from servo board) */
#define EC_SWITCH_DEDICATED_RECOVERY 0x10
/* Was fake developer mode switch; now unused. Remove in next refactor. */
@@ -147,10 +172,15 @@
/* Host command interface flags */
/* Host command interface supports LPC args (LPC interface only) */
#define EC_HOST_CMD_FLAG_LPC_ARGS_SUPPORTED 0x01
+/* Host command interface supports version 3 protocol */
+#define EC_HOST_CMD_FLAG_VERSION_3 0x02
/* Wireless switch flags */
-#define EC_WIRELESS_SWITCH_WLAN 0x01
-#define EC_WIRELESS_SWITCH_BLUETOOTH 0x02
+#define EC_WIRELESS_SWITCH_ALL ~0x00 /* All flags */
+#define EC_WIRELESS_SWITCH_WLAN 0x01 /* WLAN radio */
+#define EC_WIRELESS_SWITCH_BLUETOOTH 0x02 /* Bluetooth radio */
+#define EC_WIRELESS_SWITCH_WWAN 0x04 /* WWAN power */
+#define EC_WIRELESS_SWITCH_WLAN_POWER 0x08 /* WLAN power */
/*
* This header file is used in coreboot both in C and ACPI code. The ACPI code
@@ -159,6 +189,14 @@
*/
#ifndef __ACPI__
+/*
+ * Define __packed if someone hasn't beat us to it. Linux kernel style
+ * checking prefers __packed over __attribute__((packed)).
+ */
+#ifndef __packed
+#define __packed __attribute__((packed))
+#endif
+
/* LPC command status byte masks */
/* EC has written a byte in the data register and host hasn't read it yet */
#define EC_LPC_STATUS_TO_HOST 0x01
@@ -198,6 +236,9 @@ enum ec_status {
EC_RES_UNAVAILABLE = 9, /* No response available */
EC_RES_TIMEOUT = 10, /* We got a timeout */
EC_RES_OVERFLOW = 11, /* Table / data overflow */
+ EC_RES_INVALID_HEADER = 12, /* Header contains invalid data */
+ EC_RES_REQUEST_TRUNCATED = 13, /* Didn't get the entire request */
+ EC_RES_RESPONSE_TOO_BIG = 14 /* Response was too big to handle */
};
/*
@@ -235,6 +276,16 @@ enum host_event_code {
/* Shutdown due to battery level too low */
EC_HOST_EVENT_BATTERY_SHUTDOWN = 17,
+ /* Suggest that the AP throttle itself */
+ EC_HOST_EVENT_THROTTLE_START = 18,
+ /* Suggest that the AP resume normal speed */
+ EC_HOST_EVENT_THROTTLE_STOP = 19,
+
+ /* Hang detect logic detected a hang and host event timeout expired */
+ EC_HOST_EVENT_HANG_DETECT = 20,
+ /* Hang detect logic detected a hang and warm rebooted the AP */
+ EC_HOST_EVENT_HANG_REBOOT = 21,
+
/*
* The high bit of the event mask is not used as a host event code. If
* it reads back as set, then the entire event mask should be
@@ -279,6 +330,188 @@ struct ec_lpc_host_args {
*/
#define EC_HOST_ARGS_FLAG_TO_HOST 0x02
+/*****************************************************************************/
+/*
+ * Byte codes returned by EC over SPI interface.
+ *
+ * These can be used by the AP to debug the EC interface, and to determine
+ * when the EC is not in a state where it will ever get around to responding
+ * to the AP.
+ *
+ * Example of sequence of bytes read from EC for a current good transfer:
+ * 1. - - AP asserts chip select (CS#)
+ * 2. EC_SPI_OLD_READY - AP sends first byte(s) of request
+ * 3. - - EC starts handling CS# interrupt
+ * 4. EC_SPI_RECEIVING - AP sends remaining byte(s) of request
+ * 5. EC_SPI_PROCESSING - EC starts processing request; AP is clocking in
+ * bytes looking for EC_SPI_FRAME_START
+ * 6. - - EC finishes processing and sets up response
+ * 7. EC_SPI_FRAME_START - AP reads frame byte
+ * 8. (response packet) - AP reads response packet
+ * 9. EC_SPI_PAST_END - Any additional bytes read by AP
+ * 10 - - AP deasserts chip select
+ * 11 - - EC processes CS# interrupt and sets up DMA for
+ * next request
+ *
+ * If the AP is waiting for EC_SPI_FRAME_START and sees any value other than
+ * the following byte values:
+ * EC_SPI_OLD_READY
+ * EC_SPI_RX_READY
+ * EC_SPI_RECEIVING
+ * EC_SPI_PROCESSING
+ *
+ * Then the EC found an error in the request, or was not ready for the request
+ * and lost data. The AP should give up waiting for EC_SPI_FRAME_START,
+ * because the EC is unable to tell when the AP is done sending its request.
+ */
+
+/*
+ * Framing byte which precedes a response packet from the EC. After sending a
+ * request, the AP will clock in bytes until it sees the framing byte, then
+ * clock in the response packet.
+ */
+#define EC_SPI_FRAME_START 0xec
+
+/*
+ * Padding bytes which are clocked out after the end of a response packet.
+ */
+#define EC_SPI_PAST_END 0xed
+
+/*
+ * EC is ready to receive, and has ignored the byte sent by the AP. EC expects
+ * that the AP will send a valid packet header (starting with
+ * EC_COMMAND_PROTOCOL_3) in the next 32 bytes.
+ */
+#define EC_SPI_RX_READY 0xf8
+
+/*
+ * EC has started receiving the request from the AP, but hasn't started
+ * processing it yet.
+ */
+#define EC_SPI_RECEIVING 0xf9
+
+/* EC has received the entire request from the AP and is processing it. */
+#define EC_SPI_PROCESSING 0xfa
+
+/*
+ * EC received bad data from the AP, such as a packet header with an invalid
+ * length. EC will ignore all data until chip select deasserts.
+ */
+#define EC_SPI_RX_BAD_DATA 0xfb
+
+/*
+ * EC received data from the AP before it was ready. That is, the AP asserted
+ * chip select and started clocking data before the EC was ready to receive it.
+ * EC will ignore all data until chip select deasserts.
+ */
+#define EC_SPI_NOT_READY 0xfc
+
+/*
+ * EC was ready to receive a request from the AP. EC has treated the byte sent
+ * by the AP as part of a request packet, or (for old-style ECs) is processing
+ * a fully received packet but is not ready to respond yet.
+ */
+#define EC_SPI_OLD_READY 0xfd
+
+/*****************************************************************************/
+
+/*
+ * Protocol version 2 for I2C and SPI send a request this way:
+ *
+ * 0 EC_CMD_VERSION0 + (command version)
+ * 1 Command number
+ * 2 Length of params = N
+ * 3..N+2 Params, if any
+ * N+3 8-bit checksum of bytes 0..N+2
+ *
+ * The corresponding response is:
+ *
+ * 0 Result code (EC_RES_*)
+ * 1 Length of params = M
+ * 2..M+1 Params, if any
+ * M+2 8-bit checksum of bytes 0..M+1
+ */
+#define EC_PROTO2_REQUEST_HEADER_BYTES 3
+#define EC_PROTO2_REQUEST_TRAILER_BYTES 1
+#define EC_PROTO2_REQUEST_OVERHEAD (EC_PROTO2_REQUEST_HEADER_BYTES + \
+ EC_PROTO2_REQUEST_TRAILER_BYTES)
+
+#define EC_PROTO2_RESPONSE_HEADER_BYTES 2
+#define EC_PROTO2_RESPONSE_TRAILER_BYTES 1
+#define EC_PROTO2_RESPONSE_OVERHEAD (EC_PROTO2_RESPONSE_HEADER_BYTES + \
+ EC_PROTO2_RESPONSE_TRAILER_BYTES)
+
+/* Parameter length was limited by the LPC interface */
+#define EC_PROTO2_MAX_PARAM_SIZE 0xfc
+
+/* Maximum request and response packet sizes for protocol version 2 */
+#define EC_PROTO2_MAX_REQUEST_SIZE (EC_PROTO2_REQUEST_OVERHEAD + \
+ EC_PROTO2_MAX_PARAM_SIZE)
+#define EC_PROTO2_MAX_RESPONSE_SIZE (EC_PROTO2_RESPONSE_OVERHEAD + \
+ EC_PROTO2_MAX_PARAM_SIZE)
+
+/*****************************************************************************/
+
+/*
+ * Value written to legacy command port / prefix byte to indicate protocol
+ * 3+ structs are being used. Usage is bus-dependent.
+ */
+#define EC_COMMAND_PROTOCOL_3 0xda
+
+#define EC_HOST_REQUEST_VERSION 3
+
+/* Version 3 request from host */
+struct ec_host_request {
+ /* Struct version (=3)
+ *
+ * EC will return EC_RES_INVALID_HEADER if it receives a header with a
+ * version it doesn't know how to parse.
+ */
+ uint8_t struct_version;
+
+ /*
+ * Checksum of request and data; sum of all bytes including checksum
+ * should total to 0.
+ */
+ uint8_t checksum;
+
+ /* Command code */
+ uint16_t command;
+
+ /* Command version */
+ uint8_t command_version;
+
+ /* Unused byte in current protocol version; set to 0 */
+ uint8_t reserved;
+
+ /* Length of data which follows this header */
+ uint16_t data_len;
+} __packed;
+
+#define EC_HOST_RESPONSE_VERSION 3
+
+/* Version 3 response from EC */
+struct ec_host_response {
+ /* Struct version (=3) */
+ uint8_t struct_version;
+
+ /*
+ * Checksum of response and data; sum of all bytes including checksum
+ * should total to 0.
+ */
+ uint8_t checksum;
+
+ /* Result code (EC_RES_*) */
+ uint16_t result;
+
+ /* Length of data which follows this header */
+ uint16_t data_len;
+
+ /* Unused bytes in current protocol version; set to 0 */
+ uint16_t reserved;
+} __packed;
+
+/*****************************************************************************/
/*
* Notes on commands:
*
@@ -418,6 +651,68 @@ struct ec_response_get_comms_status {
uint32_t flags; /* Mask of enum ec_comms_status */
} __packed;
+/* Fake a variety of responses, purely for testing purposes. */
+#define EC_CMD_TEST_PROTOCOL 0x0a
+
+/* Tell the EC what to send back to us. */
+struct ec_params_test_protocol {
+ uint32_t ec_result;
+ uint32_t ret_len;
+ uint8_t buf[32];
+} __packed;
+
+/* Here it comes... */
+struct ec_response_test_protocol {
+ uint8_t buf[32];
+} __packed;
+
+/* Get prococol information */
+#define EC_CMD_GET_PROTOCOL_INFO 0x0b
+
+/* Flags for ec_response_get_protocol_info.flags */
+/* EC_RES_IN_PROGRESS may be returned if a command is slow */
+#define EC_PROTOCOL_INFO_IN_PROGRESS_SUPPORTED (1 << 0)
+
+struct ec_response_get_protocol_info {
+ /* Fields which exist if at least protocol version 3 supported */
+
+ /* Bitmask of protocol versions supported (1 << n means version n)*/
+ uint32_t protocol_versions;
+
+ /* Maximum request packet size, in bytes */
+ uint16_t max_request_packet_size;
+
+ /* Maximum response packet size, in bytes */
+ uint16_t max_response_packet_size;
+
+ /* Flags; see EC_PROTOCOL_INFO_* */
+ uint32_t flags;
+} __packed;
+
+
+/*****************************************************************************/
+/* Get/Set miscellaneous values */
+
+/* The upper byte of .flags tells what to do (nothing means "get") */
+#define EC_GSV_SET 0x80000000
+
+/* The lower three bytes of .flags identifies the parameter, if that has
+ meaning for an individual command. */
+#define EC_GSV_PARAM_MASK 0x00ffffff
+
+struct ec_params_get_set_value {
+ uint32_t flags;
+ uint32_t value;
+} __packed;
+
+struct ec_response_get_set_value {
+ uint32_t flags;
+ uint32_t value;
+} __packed;
+
+/* More than one command can use these structs to get/set paramters. */
+#define EC_CMD_GSV_PAUSE_IN_S5 0x0c
+
/*****************************************************************************/
/* Flash commands */
@@ -425,6 +720,7 @@ struct ec_response_get_comms_status {
/* Get flash info */
#define EC_CMD_FLASH_INFO 0x10
+/* Version 0 returns these fields */
struct ec_response_flash_info {
/* Usable flash size, in bytes */
uint32_t flash_size;
@@ -445,6 +741,37 @@ struct ec_response_flash_info {
uint32_t protect_block_size;
} __packed;
+/* Flags for version 1+ flash info command */
+/* EC flash erases bits to 0 instead of 1 */
+#define EC_FLASH_INFO_ERASE_TO_0 (1 << 0)
+
+/*
+ * Version 1 returns the same initial fields as version 0, with additional
+ * fields following.
+ *
+ * gcc anonymous structs don't seem to get along with the __packed directive;
+ * if they did we'd define the version 0 struct as a sub-struct of this one.
+ */
+struct ec_response_flash_info_1 {
+ /* Version 0 fields; see above for description */
+ uint32_t flash_size;
+ uint32_t write_block_size;
+ uint32_t erase_block_size;
+ uint32_t protect_block_size;
+
+ /* Version 1 adds these fields: */
+ /*
+ * Ideal write size in bytes. Writes will be fastest if size is
+ * exactly this and offset is a multiple of this. For example, an EC
+ * may have a write buffer which can do half-page operations if data is
+ * aligned, and a slower word-at-a-time write mode.
+ */
+ uint32_t write_ideal_size;
+
+ /* Flags; see EC_FLASH_INFO_* */
+ uint32_t flags;
+} __packed;
+
/*
* Read flash
*
@@ -459,15 +786,15 @@ struct ec_params_flash_read {
/* Write flash */
#define EC_CMD_FLASH_WRITE 0x12
+#define EC_VER_FLASH_WRITE 1
+
+/* Version 0 of the flash command supported only 64 bytes of data */
+#define EC_FLASH_WRITE_VER0_SIZE 64
struct ec_params_flash_write {
uint32_t offset; /* Byte offset to write */
uint32_t size; /* Size to write in bytes */
- /*
- * Data to write. Could really use EC_PARAM_SIZE - 8, but tidiest to
- * use a power of 2 so writes stay aligned.
- */
- uint8_t data[64];
+ /* Followed by data to write */
} __packed;
/* Erase flash */
@@ -543,7 +870,7 @@ struct ec_response_flash_protect {
enum ec_flash_region {
/* Region which holds read-only EC image */
- EC_FLASH_REGION_RO,
+ EC_FLASH_REGION_RO = 0,
/* Region which holds rewritable EC image */
EC_FLASH_REGION_RW,
/*
@@ -551,6 +878,8 @@ enum ec_flash_region {
* EC_FLASH_REGION_RO)
*/
EC_FLASH_REGION_WP_RO,
+ /* Number of regions */
+ EC_FLASH_REGION_COUNT,
};
struct ec_params_flash_region_info {
@@ -639,15 +968,15 @@ struct rgb_s {
*/
struct lightbar_params {
/* Timing */
- int google_ramp_up;
- int google_ramp_down;
- int s3s0_ramp_up;
- int s0_tick_delay[2]; /* AC=0/1 */
- int s0a_tick_delay[2]; /* AC=0/1 */
- int s0s3_ramp_down;
- int s3_sleep_for;
- int s3_ramp_up;
- int s3_ramp_down;
+ int32_t google_ramp_up;
+ int32_t google_ramp_down;
+ int32_t s3s0_ramp_up;
+ int32_t s0_tick_delay[2]; /* AC=0/1 */
+ int32_t s0a_tick_delay[2]; /* AC=0/1 */
+ int32_t s0s3_ramp_down;
+ int32_t s3_sleep_for;
+ int32_t s3_ramp_up;
+ int32_t s3_ramp_down;
/* Oscillation */
uint8_t new_s0;
@@ -676,7 +1005,7 @@ struct ec_params_lightbar {
union {
struct {
/* no args */
- } dump, off, on, init, get_seq, get_params;
+ } dump, off, on, init, get_seq, get_params, version;
struct num {
uint8_t num;
@@ -710,6 +1039,11 @@ struct ec_response_lightbar {
struct lightbar_params get_params;
+ struct version {
+ uint32_t num;
+ uint32_t flags;
+ } version;
+
struct {
/* no return params */
} off, on, init, brightness, seq, reg, rgb, demo, set_params;
@@ -730,10 +1064,62 @@ enum lightbar_command {
LIGHTBAR_CMD_DEMO = 9,
LIGHTBAR_CMD_GET_PARAMS = 10,
LIGHTBAR_CMD_SET_PARAMS = 11,
+ LIGHTBAR_CMD_VERSION = 12,
LIGHTBAR_NUM_CMDS
};
/*****************************************************************************/
+/* LED control commands */
+
+#define EC_CMD_LED_CONTROL 0x29
+
+enum ec_led_id {
+ /* LED to indicate battery state of charge */
+ EC_LED_ID_BATTERY_LED = 0,
+ /*
+ * LED to indicate system power state (on or in suspend).
+ * May be on power button or on C-panel.
+ */
+ EC_LED_ID_POWER_LED,
+ /* LED on power adapter or its plug */
+ EC_LED_ID_ADAPTER_LED,
+
+ EC_LED_ID_COUNT
+};
+
+/* LED control flags */
+#define EC_LED_FLAGS_QUERY (1 << 0) /* Query LED capability only */
+#define EC_LED_FLAGS_AUTO (1 << 1) /* Switch LED back to automatic control */
+
+enum ec_led_colors {
+ EC_LED_COLOR_RED = 0,
+ EC_LED_COLOR_GREEN,
+ EC_LED_COLOR_BLUE,
+ EC_LED_COLOR_YELLOW,
+ EC_LED_COLOR_WHITE,
+
+ EC_LED_COLOR_COUNT
+};
+
+struct ec_params_led_control {
+ uint8_t led_id; /* Which LED to control */
+ uint8_t flags; /* Control flags */
+
+ uint8_t brightness[EC_LED_COLOR_COUNT];
+} __packed;
+
+struct ec_response_led_control {
+ /*
+ * Available brightness value range.
+ *
+ * Range 0 means color channel not present.
+ * Range 1 means on/off control.
+ * Other values means the LED is control by PWM.
+ */
+ uint8_t brightness_range[EC_LED_COLOR_COUNT];
+} __packed;
+
+/*****************************************************************************/
/* Verified boot commands */
/*
@@ -790,6 +1176,181 @@ enum ec_vboot_hash_status {
#define EC_VBOOT_HASH_OFFSET_RW 0xfffffffd
/*****************************************************************************/
+/*
+ * Motion sense commands. We'll make separate structs for sub-commands with
+ * different input args, so that we know how much to expect.
+ */
+#define EC_CMD_MOTION_SENSE_CMD 0x2B
+
+/* Motion sense commands */
+enum motionsense_command {
+ /*
+ * Dump command returns all motion sensor data including motion sense
+ * module flags and individual sensor flags.
+ */
+ MOTIONSENSE_CMD_DUMP = 0,
+
+ /*
+ * Info command returns data describing the details of a given sensor,
+ * including enum motionsensor_type, enum motionsensor_location, and
+ * enum motionsensor_chip.
+ */
+ MOTIONSENSE_CMD_INFO = 1,
+
+ /*
+ * EC Rate command is a setter/getter command for the EC sampling rate
+ * of all motion sensors in milliseconds.
+ */
+ MOTIONSENSE_CMD_EC_RATE = 2,
+
+ /*
+ * Sensor ODR command is a setter/getter command for the output data
+ * rate of a specific motion sensor in millihertz.
+ */
+ MOTIONSENSE_CMD_SENSOR_ODR = 3,
+
+ /*
+ * Sensor range command is a setter/getter command for the range of
+ * a specified motion sensor in +/-G's or +/- deg/s.
+ */
+ MOTIONSENSE_CMD_SENSOR_RANGE = 4,
+
+ /*
+ * Setter/getter command for the keyboard wake angle. When the lid
+ * angle is greater than this value, keyboard wake is disabled in S3,
+ * and when the lid angle goes less than this value, keyboard wake is
+ * enabled. Note, the lid angle measurement is an approximate,
+ * un-calibrated value, hence the wake angle isn't exact.
+ */
+ MOTIONSENSE_CMD_KB_WAKE_ANGLE = 5,
+
+ /* Number of motionsense sub-commands. */
+ MOTIONSENSE_NUM_CMDS
+};
+
+enum motionsensor_id {
+ EC_MOTION_SENSOR_ACCEL_BASE = 0,
+ EC_MOTION_SENSOR_ACCEL_LID = 1,
+ EC_MOTION_SENSOR_GYRO = 2,
+
+ /*
+ * Note, if more sensors are added and this count changes, the padding
+ * in ec_response_motion_sense dump command must be modified.
+ */
+ EC_MOTION_SENSOR_COUNT = 3
+};
+
+/* List of motion sensor types. */
+enum motionsensor_type {
+ MOTIONSENSE_TYPE_ACCEL = 0,
+ MOTIONSENSE_TYPE_GYRO = 1,
+};
+
+/* List of motion sensor locations. */
+enum motionsensor_location {
+ MOTIONSENSE_LOC_BASE = 0,
+ MOTIONSENSE_LOC_LID = 1,
+};
+
+/* List of motion sensor chips. */
+enum motionsensor_chip {
+ MOTIONSENSE_CHIP_KXCJ9 = 0,
+};
+
+/* Module flag masks used for the dump sub-command. */
+#define MOTIONSENSE_MODULE_FLAG_ACTIVE (1<<0)
+
+/* Sensor flag masks used for the dump sub-command. */
+#define MOTIONSENSE_SENSOR_FLAG_PRESENT (1<<0)
+
+/*
+ * Send this value for the data element to only perform a read. If you
+ * send any other value, the EC will interpret it as data to set and will
+ * return the actual value set.
+ */
+#define EC_MOTION_SENSE_NO_VALUE -1
+
+struct ec_params_motion_sense {
+ uint8_t cmd;
+ union {
+ /* Used for MOTIONSENSE_CMD_DUMP. */
+ struct {
+ /* no args */
+ } dump;
+
+ /*
+ * Used for MOTIONSENSE_CMD_EC_RATE and
+ * MOTIONSENSE_CMD_KB_WAKE_ANGLE.
+ */
+ struct {
+ /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */
+ int16_t data;
+ } ec_rate, kb_wake_angle;
+
+ /* Used for MOTIONSENSE_CMD_INFO. */
+ struct {
+ /* Should be element of enum motionsensor_id. */
+ uint8_t sensor_num;
+ } info;
+
+ /*
+ * Used for MOTIONSENSE_CMD_SENSOR_ODR and
+ * MOTIONSENSE_CMD_SENSOR_RANGE.
+ */
+ struct {
+ /* Should be element of enum motionsensor_id. */
+ uint8_t sensor_num;
+
+ /* Rounding flag, true for round-up, false for down. */
+ uint8_t roundup;
+
+ uint16_t reserved;
+
+ /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */
+ int32_t data;
+ } sensor_odr, sensor_range;
+ };
+} __packed;
+
+struct ec_response_motion_sense {
+ union {
+ /* Used for MOTIONSENSE_CMD_DUMP. */
+ struct {
+ /* Flags representing the motion sensor module. */
+ uint8_t module_flags;
+
+ /* Flags for each sensor in enum motionsensor_id. */
+ uint8_t sensor_flags[EC_MOTION_SENSOR_COUNT];
+
+ /* Array of all sensor data. Each sensor is 3-axis. */
+ int16_t data[3*EC_MOTION_SENSOR_COUNT];
+ } dump;
+
+ /* Used for MOTIONSENSE_CMD_INFO. */
+ struct {
+ /* Should be element of enum motionsensor_type. */
+ uint8_t type;
+
+ /* Should be element of enum motionsensor_location. */
+ uint8_t location;
+
+ /* Should be element of enum motionsensor_chip. */
+ uint8_t chip;
+ } info;
+
+ /*
+ * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR,
+ * MOTIONSENSE_CMD_SENSOR_RANGE, and
+ * MOTIONSENSE_CMD_KB_WAKE_ANGLE.
+ */
+ struct {
+ /* Current value of the parameter queried. */
+ int32_t ret;
+ } ec_rate, sensor_odr, sensor_range, kb_wake_angle;
+ };
+} __packed;
+
+/*****************************************************************************/
/* USB charging control commands */
/* Set USB port charging mode */
@@ -868,20 +1429,27 @@ struct ec_response_port80_last_boot {
} __packed;
/*****************************************************************************/
-/* Thermal engine commands */
+/* Thermal engine commands. Note that there are two implementations. We'll
+ * reuse the command number, but the data and behavior is incompatible.
+ * Version 0 is what originally shipped on Link.
+ * Version 1 separates the CPU thermal limits from the fan control.
+ */
-/* Set thershold value */
#define EC_CMD_THERMAL_SET_THRESHOLD 0x50
+#define EC_CMD_THERMAL_GET_THRESHOLD 0x51
+
+/* The version 0 structs are opaque. You have to know what they are for
+ * the get/set commands to make any sense.
+ */
+/* Version 0 - set */
struct ec_params_thermal_set_threshold {
uint8_t sensor_type;
uint8_t threshold_id;
uint16_t value;
} __packed;
-/* Get threshold value */
-#define EC_CMD_THERMAL_GET_THRESHOLD 0x51
-
+/* Version 0 - get */
struct ec_params_thermal_get_threshold {
uint8_t sensor_type;
uint8_t threshold_id;
@@ -891,6 +1459,41 @@ struct ec_response_thermal_get_threshold {
uint16_t value;
} __packed;
+
+/* The version 1 structs are visible. */
+enum ec_temp_thresholds {
+ EC_TEMP_THRESH_WARN = 0,
+ EC_TEMP_THRESH_HIGH,
+ EC_TEMP_THRESH_HALT,
+
+ EC_TEMP_THRESH_COUNT
+};
+
+/* Thermal configuration for one temperature sensor. Temps are in degrees K.
+ * Zero values will be silently ignored by the thermal task.
+ */
+struct ec_thermal_config {
+ uint32_t temp_host[EC_TEMP_THRESH_COUNT]; /* levels of hotness */
+ uint32_t temp_fan_off; /* no active cooling needed */
+ uint32_t temp_fan_max; /* max active cooling needed */
+} __packed;
+
+/* Version 1 - get config for one sensor. */
+struct ec_params_thermal_get_threshold_v1 {
+ uint32_t sensor_num;
+} __packed;
+/* This returns a struct ec_thermal_config */
+
+/* Version 1 - set config for one sensor.
+ * Use read-modify-write for best results! */
+struct ec_params_thermal_set_threshold_v1 {
+ uint32_t sensor_num;
+ struct ec_thermal_config cfg;
+} __packed;
+/* This returns no data */
+
+/****************************************************************************/
+
/* Toggle automatic fan control */
#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x52
@@ -920,6 +1523,18 @@ struct ec_params_tmp006_set_calibration {
float b2;
} __packed;
+/* Read raw TMP006 data */
+#define EC_CMD_TMP006_GET_RAW 0x55
+
+struct ec_params_tmp006_get_raw {
+ uint8_t index;
+} __packed;
+
+struct ec_response_tmp006_get_raw {
+ int32_t t; /* In 1/100 K */
+ int32_t v; /* In nV */
+};
+
/*****************************************************************************/
/* MKBP - Matrix KeyBoard Protocol */
@@ -1118,11 +1733,41 @@ struct ec_params_switch_enable_backlight {
/* Enable/disable WLAN/Bluetooth */
#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x91
+#define EC_VER_SWITCH_ENABLE_WIRELESS 1
-struct ec_params_switch_enable_wireless {
+/* Version 0 params; no response */
+struct ec_params_switch_enable_wireless_v0 {
uint8_t enabled;
} __packed;
+/* Version 1 params */
+struct ec_params_switch_enable_wireless_v1 {
+ /* Flags to enable now */
+ uint8_t now_flags;
+
+ /* Which flags to copy from now_flags */
+ uint8_t now_mask;
+
+ /*
+ * Flags to leave enabled in S3, if they're on at the S0->S3
+ * transition. (Other flags will be disabled by the S0->S3
+ * transition.)
+ */
+ uint8_t suspend_flags;
+
+ /* Which flags to copy from suspend_flags */
+ uint8_t suspend_mask;
+} __packed;
+
+/* Version 1 response */
+struct ec_response_switch_enable_wireless_v1 {
+ /* Flags to enable now */
+ uint8_t now_flags;
+
+ /* Flags to leave enabled in S3 */
+ uint8_t suspend_flags;
+} __packed;
+
/*****************************************************************************/
/* GPIO commands. Only available on EC if write protect has been disabled. */
@@ -1147,11 +1792,16 @@ struct ec_response_gpio_get {
/*****************************************************************************/
/* I2C commands. Only available when flash write protect is unlocked. */
+/*
+ * TODO(crosbug.com/p/23570): These commands are deprecated, and will be
+ * removed soon. Use EC_CMD_I2C_XFER instead.
+ */
+
/* Read I2C bus */
#define EC_CMD_I2C_READ 0x94
struct ec_params_i2c_read {
- uint16_t addr;
+ uint16_t addr; /* 8-bit address (7-bit shifted << 1) */
uint8_t read_size; /* Either 8 or 16. */
uint8_t port;
uint8_t offset;
@@ -1165,7 +1815,7 @@ struct ec_response_i2c_read {
struct ec_params_i2c_write {
uint16_t data;
- uint16_t addr;
+ uint16_t addr; /* 8-bit address (7-bit shifted << 1) */
uint8_t write_size; /* Either 8 or 16. */
uint8_t port;
uint8_t offset;
@@ -1174,11 +1824,20 @@ struct ec_params_i2c_write {
/*****************************************************************************/
/* Charge state commands. Only available when flash write protect unlocked. */
-/* Force charge state machine to stop in idle mode */
-#define EC_CMD_CHARGE_FORCE_IDLE 0x96
+/* Force charge state machine to stop charging the battery or force it to
+ * discharge the battery.
+ */
+#define EC_CMD_CHARGE_CONTROL 0x96
+#define EC_VER_CHARGE_CONTROL 1
-struct ec_params_force_idle {
- uint8_t enabled;
+enum ec_charge_control_mode {
+ CHARGE_CONTROL_NORMAL = 0,
+ CHARGE_CONTROL_IDLE,
+ CHARGE_CONTROL_DISCHARGE,
+};
+
+struct ec_params_charge_control {
+ uint32_t mode; /* enum charge_control_mode */
} __packed;
/*****************************************************************************/
@@ -1206,14 +1865,231 @@ struct ec_params_force_idle {
#define EC_CMD_BATTERY_CUT_OFF 0x99
/*****************************************************************************/
-/* Temporary debug commands. TODO: remove this crosbug.com/p/13849 */
+/* USB port mux control. */
/*
- * Dump charge state machine context.
- *
- * Response is a binary dump of charge state machine context.
+ * Switch USB mux or return to automatic switching.
+ */
+#define EC_CMD_USB_MUX 0x9a
+
+struct ec_params_usb_mux {
+ uint8_t mux;
+} __packed;
+
+/*****************************************************************************/
+/* LDOs / FETs control. */
+
+enum ec_ldo_state {
+ EC_LDO_STATE_OFF = 0, /* the LDO / FET is shut down */
+ EC_LDO_STATE_ON = 1, /* the LDO / FET is ON / providing power */
+};
+
+/*
+ * Switch on/off a LDO.
+ */
+#define EC_CMD_LDO_SET 0x9b
+
+struct ec_params_ldo_set {
+ uint8_t index;
+ uint8_t state;
+} __packed;
+
+/*
+ * Get LDO state.
+ */
+#define EC_CMD_LDO_GET 0x9c
+
+struct ec_params_ldo_get {
+ uint8_t index;
+} __packed;
+
+struct ec_response_ldo_get {
+ uint8_t state;
+} __packed;
+
+/*****************************************************************************/
+/* Power info. */
+
+/*
+ * Get power info.
+ */
+#define EC_CMD_POWER_INFO 0x9d
+
+struct ec_response_power_info {
+ uint32_t usb_dev_type;
+ uint16_t voltage_ac;
+ uint16_t voltage_system;
+ uint16_t current_system;
+ uint16_t usb_current_limit;
+} __packed;
+
+/*****************************************************************************/
+/* I2C passthru command */
+
+#define EC_CMD_I2C_PASSTHRU 0x9e
+
+/* Slave address is 10 (not 7) bit */
+#define EC_I2C_FLAG_10BIT (1 << 16)
+
+/* Read data; if not present, message is a write */
+#define EC_I2C_FLAG_READ (1 << 15)
+
+/* Mask for address */
+#define EC_I2C_ADDR_MASK 0x3ff
+
+#define EC_I2C_STATUS_NAK (1 << 0) /* Transfer was not acknowledged */
+#define EC_I2C_STATUS_TIMEOUT (1 << 1) /* Timeout during transfer */
+
+/* Any error */
+#define EC_I2C_STATUS_ERROR (EC_I2C_STATUS_NAK | EC_I2C_STATUS_TIMEOUT)
+
+struct ec_params_i2c_passthru_msg {
+ uint16_t addr_flags; /* I2C slave address (7 or 10 bits) and flags */
+ uint16_t len; /* Number of bytes to read or write */
+} __packed;
+
+struct ec_params_i2c_passthru {
+ uint8_t port; /* I2C port number */
+ uint8_t num_msgs; /* Number of messages */
+ struct ec_params_i2c_passthru_msg msg[];
+ /* Data to write for all messages is concatenated here */
+} __packed;
+
+struct ec_response_i2c_passthru {
+ uint8_t i2c_status; /* Status flags (EC_I2C_STATUS_...) */
+ uint8_t num_msgs; /* Number of messages processed */
+ uint8_t data[]; /* Data read by messages concatenated here */
+} __packed;
+
+/*****************************************************************************/
+/* Power button hang detect */
+
+#define EC_CMD_HANG_DETECT 0x9f
+
+/* Reasons to start hang detection timer */
+/* Power button pressed */
+#define EC_HANG_START_ON_POWER_PRESS (1 << 0)
+
+/* Lid closed */
+#define EC_HANG_START_ON_LID_CLOSE (1 << 1)
+
+ /* Lid opened */
+#define EC_HANG_START_ON_LID_OPEN (1 << 2)
+
+/* Start of AP S3->S0 transition (booting or resuming from suspend) */
+#define EC_HANG_START_ON_RESUME (1 << 3)
+
+/* Reasons to cancel hang detection */
+
+/* Power button released */
+#define EC_HANG_STOP_ON_POWER_RELEASE (1 << 8)
+
+/* Any host command from AP received */
+#define EC_HANG_STOP_ON_HOST_COMMAND (1 << 9)
+
+/* Stop on end of AP S0->S3 transition (suspending or shutting down) */
+#define EC_HANG_STOP_ON_SUSPEND (1 << 10)
+
+/*
+ * If this flag is set, all the other fields are ignored, and the hang detect
+ * timer is started. This provides the AP a way to start the hang timer
+ * without reconfiguring any of the other hang detect settings. Note that
+ * you must previously have configured the timeouts.
+ */
+#define EC_HANG_START_NOW (1 << 30)
+
+/*
+ * If this flag is set, all the other fields are ignored (including
+ * EC_HANG_START_NOW). This provides the AP a way to stop the hang timer
+ * without reconfiguring any of the other hang detect settings.
*/
-#define EC_CMD_CHARGE_DUMP 0xa0
+#define EC_HANG_STOP_NOW (1 << 31)
+
+struct ec_params_hang_detect {
+ /* Flags; see EC_HANG_* */
+ uint32_t flags;
+
+ /* Timeout in msec before generating host event, if enabled */
+ uint16_t host_event_timeout_msec;
+
+ /* Timeout in msec before generating warm reboot, if enabled */
+ uint16_t warm_reboot_timeout_msec;
+} __packed;
+
+/*****************************************************************************/
+/* Commands for battery charging */
+
+/*
+ * This is the single catch-all host command to exchange data regarding the
+ * charge state machine (v2 and up).
+ */
+#define EC_CMD_CHARGE_STATE 0xa0
+
+/* Subcommands for this host command */
+enum charge_state_command {
+ CHARGE_STATE_CMD_GET_STATE,
+ CHARGE_STATE_CMD_GET_PARAM,
+ CHARGE_STATE_CMD_SET_PARAM,
+ CHARGE_STATE_NUM_CMDS
+};
+
+/*
+ * Known param numbers are defined here. Ranges are reserved for board-specific
+ * params, which are handled by the particular implementations.
+ */
+enum charge_state_params {
+ CS_PARAM_CHG_VOLTAGE, /* charger voltage limit */
+ CS_PARAM_CHG_CURRENT, /* charger current limit */
+ CS_PARAM_CHG_INPUT_CURRENT, /* charger input current limit */
+ CS_PARAM_CHG_STATUS, /* charger-specific status */
+ CS_PARAM_CHG_OPTION, /* charger-specific options */
+ /* How many so far? */
+ CS_NUM_BASE_PARAMS,
+
+ /* Range for CONFIG_CHARGER_PROFILE_OVERRIDE params */
+ CS_PARAM_CUSTOM_PROFILE_MIN = 0x10000,
+ CS_PARAM_CUSTOM_PROFILE_MAX = 0x1ffff,
+
+ /* Other custom param ranges go here... */
+};
+
+struct ec_params_charge_state {
+ uint8_t cmd; /* enum charge_state_command */
+ union {
+ struct {
+ /* no args */
+ } get_state;
+
+ struct {
+ uint32_t param; /* enum charge_state_param */
+ } get_param;
+
+ struct {
+ uint32_t param; /* param to set */
+ uint32_t value; /* value to set */
+ } set_param;
+ };
+} __packed;
+
+struct ec_response_charge_state {
+ union {
+ struct {
+ int ac;
+ int chg_voltage;
+ int chg_current;
+ int chg_input_current;
+ int batt_state_of_charge;
+ } get_state;
+
+ struct {
+ uint32_t value;
+ } get_param;
+ struct {
+ /* no return values */
+ } set_param;
+ };
+} __packed;
+
/*
* Set maximum battery charging current.
@@ -1221,15 +2097,59 @@ struct ec_params_force_idle {
#define EC_CMD_CHARGE_CURRENT_LIMIT 0xa1
struct ec_params_current_limit {
- uint32_t limit;
+ uint32_t limit; /* in mA */
+} __packed;
+
+/*
+ * Set maximum external power current.
+ */
+#define EC_CMD_EXT_POWER_CURRENT_LIMIT 0xa2
+
+struct ec_params_ext_power_current_limit {
+ uint32_t limit; /* in mA */
+} __packed;
+
+/*****************************************************************************/
+/* Smart battery pass-through */
+
+/* Get / Set 16-bit smart battery registers */
+#define EC_CMD_SB_READ_WORD 0xb0
+#define EC_CMD_SB_WRITE_WORD 0xb1
+
+/* Get / Set string smart battery parameters
+ * formatted as SMBUS "block".
+ */
+#define EC_CMD_SB_READ_BLOCK 0xb2
+#define EC_CMD_SB_WRITE_BLOCK 0xb3
+
+struct ec_params_sb_rd {
+ uint8_t reg;
+} __packed;
+
+struct ec_response_sb_rd_word {
+ uint16_t value;
+} __packed;
+
+struct ec_params_sb_wr_word {
+ uint8_t reg;
+ uint16_t value;
+} __packed;
+
+struct ec_response_sb_rd_block {
+ uint8_t data[32];
+} __packed;
+
+struct ec_params_sb_wr_block {
+ uint8_t reg;
+ uint16_t data[32];
} __packed;
/*****************************************************************************/
/* System commands */
/*
- * TODO: this is a confusing name, since it doesn't necessarily reboot the EC.
- * Rename to "set image" or something similar.
+ * TODO(crosbug.com/p/23747): This is a confusing name, since it doesn't
+ * necessarily reboot the EC. Rename to "image" or something similar?
*/
#define EC_CMD_REBOOT_EC 0xd2
@@ -1308,6 +2228,7 @@ struct ec_params_reboot_ec {
#define EC_CMD_ACPI_QUERY_EVENT 0x84
/* Valid addresses in ACPI memory space, for read/write commands */
+
/* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */
#define EC_ACPI_MEM_VERSION 0x00
/*
@@ -1317,8 +2238,60 @@ struct ec_params_reboot_ec {
#define EC_ACPI_MEM_TEST 0x01
/* Test compliment; writes here are ignored. */
#define EC_ACPI_MEM_TEST_COMPLIMENT 0x02
+
/* Keyboard backlight brightness percent (0 - 100) */
#define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03
+/* DPTF Target Fan Duty (0-100, 0xff for auto/none) */
+#define EC_ACPI_MEM_FAN_DUTY 0x04
+
+/*
+ * DPTF temp thresholds. Any of the EC's temp sensors can have up to two
+ * independent thresholds attached to them. The current value of the ID
+ * register determines which sensor is affected by the THRESHOLD and COMMIT
+ * registers. The THRESHOLD register uses the same EC_TEMP_SENSOR_OFFSET scheme
+ * as the memory-mapped sensors. The COMMIT register applies those settings.
+ *
+ * The spec does not mandate any way to read back the threshold settings
+ * themselves, but when a threshold is crossed the AP needs a way to determine
+ * which sensor(s) are responsible. Each reading of the ID register clears and
+ * returns one sensor ID that has crossed one of its threshold (in either
+ * direction) since the last read. A value of 0xFF means "no new thresholds
+ * have tripped". Setting or enabling the thresholds for a sensor will clear
+ * the unread event count for that sensor.
+ */
+#define EC_ACPI_MEM_TEMP_ID 0x05
+#define EC_ACPI_MEM_TEMP_THRESHOLD 0x06
+#define EC_ACPI_MEM_TEMP_COMMIT 0x07
+/*
+ * Here are the bits for the COMMIT register:
+ * bit 0 selects the threshold index for the chosen sensor (0/1)
+ * bit 1 enables/disables the selected threshold (0 = off, 1 = on)
+ * Each write to the commit register affects one threshold.
+ */
+#define EC_ACPI_MEM_TEMP_COMMIT_SELECT_MASK (1 << 0)
+#define EC_ACPI_MEM_TEMP_COMMIT_ENABLE_MASK (1 << 1)
+/*
+ * Example:
+ *
+ * Set the thresholds for sensor 2 to 50 C and 60 C:
+ * write 2 to [0x05] -- select temp sensor 2
+ * write 0x7b to [0x06] -- C_TO_K(50) - EC_TEMP_SENSOR_OFFSET
+ * write 0x2 to [0x07] -- enable threshold 0 with this value
+ * write 0x85 to [0x06] -- C_TO_K(60) - EC_TEMP_SENSOR_OFFSET
+ * write 0x3 to [0x07] -- enable threshold 1 with this value
+ *
+ * Disable the 60 C threshold, leaving the 50 C threshold unchanged:
+ * write 2 to [0x05] -- select temp sensor 2
+ * write 0x1 to [0x07] -- disable threshold 1
+ */
+
+/* DPTF battery charging current limit */
+#define EC_ACPI_MEM_CHARGING_LIMIT 0x08
+
+/* Charging limit is specified in 64 mA steps */
+#define EC_ACPI_MEM_CHARGING_LIMIT_STEP_MA 64
+/* Value to disable DPTF battery charging limit */
+#define EC_ACPI_MEM_CHARGING_LIMIT_DISABLED 0xff
/* Current version of ACPI memory address space */
#define EC_ACPI_MEM_VERSION_CURRENT 1
@@ -1360,10 +2333,21 @@ struct ec_params_reboot_ec {
* Header bytes greater than this indicate a later version. For example,
* EC_CMD_VERSION0 + 1 means we are using version 1.
*
- * The old EC interface must not use commands 0dc or higher.
+ * The old EC interface must not use commands 0xdc or higher.
*/
#define EC_CMD_VERSION0 0xdc
#endif /* !__ACPI__ */
+/*****************************************************************************/
+/*
+ * Deprecated constants. These constants have been renamed for clarity. The
+ * meaning and size has not changed. Programs that use the old names should
+ * switch to the new names soon, as the old names may not be carried forward
+ * forever.
+ */
+#define EC_HOST_PARAM_SIZE EC_PROTO2_MAX_PARAM_SIZE
+#define EC_LPC_ADDR_OLD_PARAM EC_HOST_CMD_REGION1
+#define EC_OLD_PARAM_SIZE EC_HOST_CMD_REGION_SIZE
+
#endif /* __CROS_EC_COMMANDS_H */
diff --git a/include/linux/mfd/ipaq-micro.h b/include/linux/mfd/ipaq-micro.h
new file mode 100644
index 000000000000..5c4d29f6674f
--- /dev/null
+++ b/include/linux/mfd/ipaq-micro.h
@@ -0,0 +1,148 @@
+/*
+ * Header file for the compaq Micro MFD
+ */
+
+#ifndef _MFD_IPAQ_MICRO_H_
+#define _MFD_IPAQ_MICRO_H_
+
+#include <linux/spinlock.h>
+#include <linux/completion.h>
+#include <linux/list.h>
+
+#define TX_BUF_SIZE 32
+#define RX_BUF_SIZE 16
+#define CHAR_SOF 0x02
+
+/*
+ * These are the different messages that can be sent to the microcontroller
+ * to control various aspects.
+ */
+#define MSG_VERSION 0x0
+#define MSG_KEYBOARD 0x2
+#define MSG_TOUCHSCREEN 0x3
+#define MSG_EEPROM_READ 0x4
+#define MSG_EEPROM_WRITE 0x5
+#define MSG_THERMAL_SENSOR 0x6
+#define MSG_NOTIFY_LED 0x8
+#define MSG_BATTERY 0x9
+#define MSG_SPI_READ 0xb
+#define MSG_SPI_WRITE 0xc
+#define MSG_BACKLIGHT 0xd /* H3600 only */
+#define MSG_CODEC_CTRL 0xe /* H3100 only */
+#define MSG_DISPLAY_CTRL 0xf /* H3100 only */
+
+/* state of receiver parser */
+enum rx_state {
+ STATE_SOF = 0, /* Next byte should be start of frame */
+ STATE_ID, /* Next byte is ID & message length */
+ STATE_DATA, /* Next byte is a data byte */
+ STATE_CHKSUM /* Next byte should be checksum */
+};
+
+/**
+ * struct ipaq_micro_txdev - TX state
+ * @len: length of message in TX buffer
+ * @index: current index into TX buffer
+ * @buf: TX buffer
+ */
+struct ipaq_micro_txdev {
+ u8 len;
+ u8 index;
+ u8 buf[TX_BUF_SIZE];
+};
+
+/**
+ * struct ipaq_micro_rxdev - RX state
+ * @state: context of RX state machine
+ * @chksum: calculated checksum
+ * @id: message ID from packet
+ * @len: RX buffer length
+ * @index: RX buffer index
+ * @buf: RX buffer
+ */
+struct ipaq_micro_rxdev {
+ enum rx_state state;
+ unsigned char chksum;
+ u8 id;
+ unsigned int len;
+ unsigned int index;
+ u8 buf[RX_BUF_SIZE];
+};
+
+/**
+ * struct ipaq_micro_msg - message to the iPAQ microcontroller
+ * @id: 4-bit ID of the message
+ * @tx_len: length of TX data
+ * @tx_data: TX data to send
+ * @rx_len: length of receieved RX data
+ * @rx_data: RX data to recieve
+ * @ack: a completion that will be completed when RX is complete
+ * @node: list node if message gets queued
+ */
+struct ipaq_micro_msg {
+ u8 id;
+ u8 tx_len;
+ u8 tx_data[TX_BUF_SIZE];
+ u8 rx_len;
+ u8 rx_data[RX_BUF_SIZE];
+ struct completion ack;
+ struct list_head node;
+};
+
+/**
+ * struct ipaq_micro - iPAQ microcontroller state
+ * @dev: corresponding platform device
+ * @base: virtual memory base for underlying serial device
+ * @sdlc: virtual memory base for Synchronous Data Link Controller
+ * @version: version string
+ * @tx: TX state
+ * @rx: RX state
+ * @lock: lock for this state container
+ * @msg: current message
+ * @queue: message queue
+ * @key: callback for asynchronous key events
+ * @key_data: data to pass along with key events
+ * @ts: callback for asynchronous touchscreen events
+ * @ts_data: data to pass along with key events
+ */
+struct ipaq_micro {
+ struct device *dev;
+ void __iomem *base;
+ void __iomem *sdlc;
+ char version[5];
+ struct ipaq_micro_txdev tx; /* transmit ISR state */
+ struct ipaq_micro_rxdev rx; /* receive ISR state */
+ spinlock_t lock;
+ struct ipaq_micro_msg *msg;
+ struct list_head queue;
+ void (*key) (void *data, int len, unsigned char *rxdata);
+ void *key_data;
+ void (*ts) (void *data, int len, unsigned char *rxdata);
+ void *ts_data;
+};
+
+extern int
+ipaq_micro_tx_msg(struct ipaq_micro *micro, struct ipaq_micro_msg *msg);
+
+static inline int
+ipaq_micro_tx_msg_sync(struct ipaq_micro *micro,
+ struct ipaq_micro_msg *msg)
+{
+ int ret;
+
+ init_completion(&msg->ack);
+ ret = ipaq_micro_tx_msg(micro, msg);
+ wait_for_completion(&msg->ack);
+
+ return ret;
+}
+
+static inline int
+ipaq_micro_tx_msg_async(struct ipaq_micro *micro,
+ struct ipaq_micro_msg *msg)
+{
+ init_completion(&msg->ack);
+ return ipaq_micro_tx_msg(micro, msg);
+}
+
+#endif /* _MFD_IPAQ_MICRO_H_ */
diff --git a/include/linux/mfd/kempld.h b/include/linux/mfd/kempld.h
index b911ef3add03..26e0b469e567 100644
--- a/include/linux/mfd/kempld.h
+++ b/include/linux/mfd/kempld.h
@@ -51,6 +51,8 @@
#define KEMPLD_TYPE_DEBUG 0x1
#define KEMPLD_TYPE_CUSTOM 0x2
+#define KEMPLD_VERSION_LEN 10
+
/**
* struct kempld_info - PLD device information structure
* @major: PLD major revision
@@ -60,6 +62,7 @@
* @type: PLD type
* @spec_major: PLD FW specification major revision
* @spec_minor: PLD FW specification minor revision
+ * @version: PLD version string
*/
struct kempld_info {
unsigned int major;
@@ -69,6 +72,7 @@ struct kempld_info {
unsigned int type;
unsigned int spec_major;
unsigned int spec_minor;
+ char version[KEMPLD_VERSION_LEN];
};
/**
diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h
index a326c850f046..d63b1d309106 100644
--- a/include/linux/mfd/mc13xxx.h
+++ b/include/linux/mfd/mc13xxx.h
@@ -117,10 +117,6 @@ struct mc13xxx_led_platform_data {
#define MAX_LED_CONTROL_REGS 6
-struct mc13xxx_leds_platform_data {
- struct mc13xxx_led_platform_data *led;
- int num_leds;
-
/* MC13783 LED Control 0 */
#define MC13783_LED_C0_ENABLE (1 << 0)
#define MC13783_LED_C0_TRIODE_MD (1 << 7)
@@ -169,10 +165,13 @@ struct mc13xxx_leds_platform_data {
/* MC34708 LED Control 0 */
#define MC34708_LED_C0_CURRENT_R(x) (((x) & 0x3) << 9)
#define MC34708_LED_C0_CURRENT_G(x) (((x) & 0x3) << 21)
+
+struct mc13xxx_leds_platform_data {
+ struct mc13xxx_led_platform_data *led;
+ int num_leds;
u32 led_control[MAX_LED_CONTROL_REGS];
};
-struct mc13xxx_buttons_platform_data {
#define MC13783_BUTTON_DBNC_0MS 0
#define MC13783_BUTTON_DBNC_30MS 1
#define MC13783_BUTTON_DBNC_150MS 2
@@ -180,6 +179,8 @@ struct mc13xxx_buttons_platform_data {
#define MC13783_BUTTON_ENABLE (1 << 2)
#define MC13783_BUTTON_POL_INVERT (1 << 3)
#define MC13783_BUTTON_RESET_EN (1 << 4)
+
+struct mc13xxx_buttons_platform_data {
int b1on_flags;
unsigned short b1on_key;
int b2on_flags;
@@ -188,14 +189,14 @@ struct mc13xxx_buttons_platform_data {
unsigned short b3on_key;
};
+#define MC13783_TS_ATO_FIRST false
+#define MC13783_TS_ATO_EACH true
+
struct mc13xxx_ts_platform_data {
/* Delay between Touchscreen polarization and ADC Conversion.
* Given in clock ticks of a 32 kHz clock which gives a granularity of
* about 30.5ms */
u8 ato;
-
-#define MC13783_TS_ATO_FIRST false
-#define MC13783_TS_ATO_EACH true
/* Use the ATO delay only for the first conversion or for each one */
bool atox;
};
@@ -210,11 +211,12 @@ struct mc13xxx_codec_platform_data {
enum mc13783_ssi_port dac_ssi_port;
};
-struct mc13xxx_platform_data {
-#define MC13XXX_USE_TOUCHSCREEN (1 << 0)
+#define MC13XXX_USE_TOUCHSCREEN (1 << 0)
#define MC13XXX_USE_CODEC (1 << 1)
#define MC13XXX_USE_ADC (1 << 2)
#define MC13XXX_USE_RTC (1 << 3)
+
+struct mc13xxx_platform_data {
unsigned int flags;
struct mc13xxx_regulator_platform_data regulators;
diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
index b8f87b704409..3420e09e2e20 100644
--- a/include/linux/mfd/palmas.h
+++ b/include/linux/mfd/palmas.h
@@ -482,10 +482,10 @@ enum usb_irq_events {
/* helper macro to get correct slave number */
#define PALMAS_BASE_TO_SLAVE(x) ((x >> 8) - 1)
-#define PALMAS_BASE_TO_REG(x, y) ((x & 0xff) + y)
+#define PALMAS_BASE_TO_REG(x, y) ((x & 0xFF) + y)
/* Base addresses of IP blocks in Palmas */
-#define PALMAS_SMPS_DVS_BASE 0x20
+#define PALMAS_SMPS_DVS_BASE 0x020
#define PALMAS_RTC_BASE 0x100
#define PALMAS_VALIDITY_BASE 0x118
#define PALMAS_SMPS_BASE 0x120
@@ -504,19 +504,19 @@ enum usb_irq_events {
#define PALMAS_TRIM_GPADC_BASE 0x3CD
/* Registers for function RTC */
-#define PALMAS_SECONDS_REG 0x0
-#define PALMAS_MINUTES_REG 0x1
-#define PALMAS_HOURS_REG 0x2
-#define PALMAS_DAYS_REG 0x3
-#define PALMAS_MONTHS_REG 0x4
-#define PALMAS_YEARS_REG 0x5
-#define PALMAS_WEEKS_REG 0x6
-#define PALMAS_ALARM_SECONDS_REG 0x8
-#define PALMAS_ALARM_MINUTES_REG 0x9
-#define PALMAS_ALARM_HOURS_REG 0xA
-#define PALMAS_ALARM_DAYS_REG 0xB
-#define PALMAS_ALARM_MONTHS_REG 0xC
-#define PALMAS_ALARM_YEARS_REG 0xD
+#define PALMAS_SECONDS_REG 0x00
+#define PALMAS_MINUTES_REG 0x01
+#define PALMAS_HOURS_REG 0x02
+#define PALMAS_DAYS_REG 0x03
+#define PALMAS_MONTHS_REG 0x04
+#define PALMAS_YEARS_REG 0x05
+#define PALMAS_WEEKS_REG 0x06
+#define PALMAS_ALARM_SECONDS_REG 0x08
+#define PALMAS_ALARM_MINUTES_REG 0x09
+#define PALMAS_ALARM_HOURS_REG 0x0A
+#define PALMAS_ALARM_DAYS_REG 0x0B
+#define PALMAS_ALARM_MONTHS_REG 0x0C
+#define PALMAS_ALARM_YEARS_REG 0x0D
#define PALMAS_RTC_CTRL_REG 0x10
#define PALMAS_RTC_STATUS_REG 0x11
#define PALMAS_RTC_INTERRUPTS_REG 0x12
@@ -527,201 +527,201 @@ enum usb_irq_events {
/* Bit definitions for SECONDS_REG */
#define PALMAS_SECONDS_REG_SEC1_MASK 0x70
-#define PALMAS_SECONDS_REG_SEC1_SHIFT 4
-#define PALMAS_SECONDS_REG_SEC0_MASK 0x0f
-#define PALMAS_SECONDS_REG_SEC0_SHIFT 0
+#define PALMAS_SECONDS_REG_SEC1_SHIFT 0x04
+#define PALMAS_SECONDS_REG_SEC0_MASK 0x0F
+#define PALMAS_SECONDS_REG_SEC0_SHIFT 0x00
/* Bit definitions for MINUTES_REG */
#define PALMAS_MINUTES_REG_MIN1_MASK 0x70
-#define PALMAS_MINUTES_REG_MIN1_SHIFT 4
-#define PALMAS_MINUTES_REG_MIN0_MASK 0x0f
-#define PALMAS_MINUTES_REG_MIN0_SHIFT 0
+#define PALMAS_MINUTES_REG_MIN1_SHIFT 0x04
+#define PALMAS_MINUTES_REG_MIN0_MASK 0x0F
+#define PALMAS_MINUTES_REG_MIN0_SHIFT 0x00
/* Bit definitions for HOURS_REG */
#define PALMAS_HOURS_REG_PM_NAM 0x80
-#define PALMAS_HOURS_REG_PM_NAM_SHIFT 7
+#define PALMAS_HOURS_REG_PM_NAM_SHIFT 0x07
#define PALMAS_HOURS_REG_HOUR1_MASK 0x30
-#define PALMAS_HOURS_REG_HOUR1_SHIFT 4
-#define PALMAS_HOURS_REG_HOUR0_MASK 0x0f
-#define PALMAS_HOURS_REG_HOUR0_SHIFT 0
+#define PALMAS_HOURS_REG_HOUR1_SHIFT 0x04
+#define PALMAS_HOURS_REG_HOUR0_MASK 0x0F
+#define PALMAS_HOURS_REG_HOUR0_SHIFT 0x00
/* Bit definitions for DAYS_REG */
#define PALMAS_DAYS_REG_DAY1_MASK 0x30
-#define PALMAS_DAYS_REG_DAY1_SHIFT 4
-#define PALMAS_DAYS_REG_DAY0_MASK 0x0f
-#define PALMAS_DAYS_REG_DAY0_SHIFT 0
+#define PALMAS_DAYS_REG_DAY1_SHIFT 0x04
+#define PALMAS_DAYS_REG_DAY0_MASK 0x0F
+#define PALMAS_DAYS_REG_DAY0_SHIFT 0x00
/* Bit definitions for MONTHS_REG */
#define PALMAS_MONTHS_REG_MONTH1 0x10
-#define PALMAS_MONTHS_REG_MONTH1_SHIFT 4
-#define PALMAS_MONTHS_REG_MONTH0_MASK 0x0f
-#define PALMAS_MONTHS_REG_MONTH0_SHIFT 0
+#define PALMAS_MONTHS_REG_MONTH1_SHIFT 0x04
+#define PALMAS_MONTHS_REG_MONTH0_MASK 0x0F
+#define PALMAS_MONTHS_REG_MONTH0_SHIFT 0x00
/* Bit definitions for YEARS_REG */
#define PALMAS_YEARS_REG_YEAR1_MASK 0xf0
-#define PALMAS_YEARS_REG_YEAR1_SHIFT 4
-#define PALMAS_YEARS_REG_YEAR0_MASK 0x0f
-#define PALMAS_YEARS_REG_YEAR0_SHIFT 0
+#define PALMAS_YEARS_REG_YEAR1_SHIFT 0x04
+#define PALMAS_YEARS_REG_YEAR0_MASK 0x0F
+#define PALMAS_YEARS_REG_YEAR0_SHIFT 0x00
/* Bit definitions for WEEKS_REG */
#define PALMAS_WEEKS_REG_WEEK_MASK 0x07
-#define PALMAS_WEEKS_REG_WEEK_SHIFT 0
+#define PALMAS_WEEKS_REG_WEEK_SHIFT 0x00
/* Bit definitions for ALARM_SECONDS_REG */
#define PALMAS_ALARM_SECONDS_REG_ALARM_SEC1_MASK 0x70
-#define PALMAS_ALARM_SECONDS_REG_ALARM_SEC1_SHIFT 4
-#define PALMAS_ALARM_SECONDS_REG_ALARM_SEC0_MASK 0x0f
-#define PALMAS_ALARM_SECONDS_REG_ALARM_SEC0_SHIFT 0
+#define PALMAS_ALARM_SECONDS_REG_ALARM_SEC1_SHIFT 0x04
+#define PALMAS_ALARM_SECONDS_REG_ALARM_SEC0_MASK 0x0F
+#define PALMAS_ALARM_SECONDS_REG_ALARM_SEC0_SHIFT 0x00
/* Bit definitions for ALARM_MINUTES_REG */
#define PALMAS_ALARM_MINUTES_REG_ALARM_MIN1_MASK 0x70
-#define PALMAS_ALARM_MINUTES_REG_ALARM_MIN1_SHIFT 4
-#define PALMAS_ALARM_MINUTES_REG_ALARM_MIN0_MASK 0x0f
-#define PALMAS_ALARM_MINUTES_REG_ALARM_MIN0_SHIFT 0
+#define PALMAS_ALARM_MINUTES_REG_ALARM_MIN1_SHIFT 0x04
+#define PALMAS_ALARM_MINUTES_REG_ALARM_MIN0_MASK 0x0F
+#define PALMAS_ALARM_MINUTES_REG_ALARM_MIN0_SHIFT 0x00
/* Bit definitions for ALARM_HOURS_REG */
#define PALMAS_ALARM_HOURS_REG_ALARM_PM_NAM 0x80
-#define PALMAS_ALARM_HOURS_REG_ALARM_PM_NAM_SHIFT 7
+#define PALMAS_ALARM_HOURS_REG_ALARM_PM_NAM_SHIFT 0x07
#define PALMAS_ALARM_HOURS_REG_ALARM_HOUR1_MASK 0x30
-#define PALMAS_ALARM_HOURS_REG_ALARM_HOUR1_SHIFT 4
-#define PALMAS_ALARM_HOURS_REG_ALARM_HOUR0_MASK 0x0f
-#define PALMAS_ALARM_HOURS_REG_ALARM_HOUR0_SHIFT 0
+#define PALMAS_ALARM_HOURS_REG_ALARM_HOUR1_SHIFT 0x04
+#define PALMAS_ALARM_HOURS_REG_ALARM_HOUR0_MASK 0x0F
+#define PALMAS_ALARM_HOURS_REG_ALARM_HOUR0_SHIFT 0x00
/* Bit definitions for ALARM_DAYS_REG */
#define PALMAS_ALARM_DAYS_REG_ALARM_DAY1_MASK 0x30
-#define PALMAS_ALARM_DAYS_REG_ALARM_DAY1_SHIFT 4
-#define PALMAS_ALARM_DAYS_REG_ALARM_DAY0_MASK 0x0f
-#define PALMAS_ALARM_DAYS_REG_ALARM_DAY0_SHIFT 0
+#define PALMAS_ALARM_DAYS_REG_ALARM_DAY1_SHIFT 0x04
+#define PALMAS_ALARM_DAYS_REG_ALARM_DAY0_MASK 0x0F
+#define PALMAS_ALARM_DAYS_REG_ALARM_DAY0_SHIFT 0x00
/* Bit definitions for ALARM_MONTHS_REG */
#define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH1 0x10
-#define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH1_SHIFT 4
-#define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH0_MASK 0x0f
-#define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH0_SHIFT 0
+#define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH1_SHIFT 0x04
+#define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH0_MASK 0x0F
+#define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH0_SHIFT 0x00
/* Bit definitions for ALARM_YEARS_REG */
#define PALMAS_ALARM_YEARS_REG_ALARM_YEAR1_MASK 0xf0
-#define PALMAS_ALARM_YEARS_REG_ALARM_YEAR1_SHIFT 4
-#define PALMAS_ALARM_YEARS_REG_ALARM_YEAR0_MASK 0x0f
-#define PALMAS_ALARM_YEARS_REG_ALARM_YEAR0_SHIFT 0
+#define PALMAS_ALARM_YEARS_REG_ALARM_YEAR1_SHIFT 0x04
+#define PALMAS_ALARM_YEARS_REG_ALARM_YEAR0_MASK 0x0F
+#define PALMAS_ALARM_YEARS_REG_ALARM_YEAR0_SHIFT 0x00
/* Bit definitions for RTC_CTRL_REG */
#define PALMAS_RTC_CTRL_REG_RTC_V_OPT 0x80
-#define PALMAS_RTC_CTRL_REG_RTC_V_OPT_SHIFT 7
+#define PALMAS_RTC_CTRL_REG_RTC_V_OPT_SHIFT 0x07
#define PALMAS_RTC_CTRL_REG_GET_TIME 0x40
-#define PALMAS_RTC_CTRL_REG_GET_TIME_SHIFT 6
+#define PALMAS_RTC_CTRL_REG_GET_TIME_SHIFT 0x06
#define PALMAS_RTC_CTRL_REG_SET_32_COUNTER 0x20
-#define PALMAS_RTC_CTRL_REG_SET_32_COUNTER_SHIFT 5
+#define PALMAS_RTC_CTRL_REG_SET_32_COUNTER_SHIFT 0x05
#define PALMAS_RTC_CTRL_REG_TEST_MODE 0x10
-#define PALMAS_RTC_CTRL_REG_TEST_MODE_SHIFT 4
+#define PALMAS_RTC_CTRL_REG_TEST_MODE_SHIFT 0x04
#define PALMAS_RTC_CTRL_REG_MODE_12_24 0x08
-#define PALMAS_RTC_CTRL_REG_MODE_12_24_SHIFT 3
+#define PALMAS_RTC_CTRL_REG_MODE_12_24_SHIFT 0x03
#define PALMAS_RTC_CTRL_REG_AUTO_COMP 0x04
-#define PALMAS_RTC_CTRL_REG_AUTO_COMP_SHIFT 2
+#define PALMAS_RTC_CTRL_REG_AUTO_COMP_SHIFT 0x02
#define PALMAS_RTC_CTRL_REG_ROUND_30S 0x02
-#define PALMAS_RTC_CTRL_REG_ROUND_30S_SHIFT 1
+#define PALMAS_RTC_CTRL_REG_ROUND_30S_SHIFT 0x01
#define PALMAS_RTC_CTRL_REG_STOP_RTC 0x01
-#define PALMAS_RTC_CTRL_REG_STOP_RTC_SHIFT 0
+#define PALMAS_RTC_CTRL_REG_STOP_RTC_SHIFT 0x00
/* Bit definitions for RTC_STATUS_REG */
#define PALMAS_RTC_STATUS_REG_POWER_UP 0x80
-#define PALMAS_RTC_STATUS_REG_POWER_UP_SHIFT 7
+#define PALMAS_RTC_STATUS_REG_POWER_UP_SHIFT 0x07
#define PALMAS_RTC_STATUS_REG_ALARM 0x40
-#define PALMAS_RTC_STATUS_REG_ALARM_SHIFT 6
+#define PALMAS_RTC_STATUS_REG_ALARM_SHIFT 0x06
#define PALMAS_RTC_STATUS_REG_EVENT_1D 0x20
-#define PALMAS_RTC_STATUS_REG_EVENT_1D_SHIFT 5
+#define PALMAS_RTC_STATUS_REG_EVENT_1D_SHIFT 0x05
#define PALMAS_RTC_STATUS_REG_EVENT_1H 0x10
-#define PALMAS_RTC_STATUS_REG_EVENT_1H_SHIFT 4
+#define PALMAS_RTC_STATUS_REG_EVENT_1H_SHIFT 0x04
#define PALMAS_RTC_STATUS_REG_EVENT_1M 0x08
-#define PALMAS_RTC_STATUS_REG_EVENT_1M_SHIFT 3
+#define PALMAS_RTC_STATUS_REG_EVENT_1M_SHIFT 0x03
#define PALMAS_RTC_STATUS_REG_EVENT_1S 0x04
-#define PALMAS_RTC_STATUS_REG_EVENT_1S_SHIFT 2
+#define PALMAS_RTC_STATUS_REG_EVENT_1S_SHIFT 0x02
#define PALMAS_RTC_STATUS_REG_RUN 0x02
-#define PALMAS_RTC_STATUS_REG_RUN_SHIFT 1
+#define PALMAS_RTC_STATUS_REG_RUN_SHIFT 0x01
/* Bit definitions for RTC_INTERRUPTS_REG */
#define PALMAS_RTC_INTERRUPTS_REG_IT_SLEEP_MASK_EN 0x10
-#define PALMAS_RTC_INTERRUPTS_REG_IT_SLEEP_MASK_EN_SHIFT 4
+#define PALMAS_RTC_INTERRUPTS_REG_IT_SLEEP_MASK_EN_SHIFT 0x04
#define PALMAS_RTC_INTERRUPTS_REG_IT_ALARM 0x08
-#define PALMAS_RTC_INTERRUPTS_REG_IT_ALARM_SHIFT 3
+#define PALMAS_RTC_INTERRUPTS_REG_IT_ALARM_SHIFT 0x03
#define PALMAS_RTC_INTERRUPTS_REG_IT_TIMER 0x04
-#define PALMAS_RTC_INTERRUPTS_REG_IT_TIMER_SHIFT 2
+#define PALMAS_RTC_INTERRUPTS_REG_IT_TIMER_SHIFT 0x02
#define PALMAS_RTC_INTERRUPTS_REG_EVERY_MASK 0x03
-#define PALMAS_RTC_INTERRUPTS_REG_EVERY_SHIFT 0
+#define PALMAS_RTC_INTERRUPTS_REG_EVERY_SHIFT 0x00
/* Bit definitions for RTC_COMP_LSB_REG */
-#define PALMAS_RTC_COMP_LSB_REG_RTC_COMP_LSB_MASK 0xff
-#define PALMAS_RTC_COMP_LSB_REG_RTC_COMP_LSB_SHIFT 0
+#define PALMAS_RTC_COMP_LSB_REG_RTC_COMP_LSB_MASK 0xFF
+#define PALMAS_RTC_COMP_LSB_REG_RTC_COMP_LSB_SHIFT 0x00
/* Bit definitions for RTC_COMP_MSB_REG */
-#define PALMAS_RTC_COMP_MSB_REG_RTC_COMP_MSB_MASK 0xff
-#define PALMAS_RTC_COMP_MSB_REG_RTC_COMP_MSB_SHIFT 0
+#define PALMAS_RTC_COMP_MSB_REG_RTC_COMP_MSB_MASK 0xFF
+#define PALMAS_RTC_COMP_MSB_REG_RTC_COMP_MSB_SHIFT 0x00
/* Bit definitions for RTC_RES_PROG_REG */
-#define PALMAS_RTC_RES_PROG_REG_SW_RES_PROG_MASK 0x3f
-#define PALMAS_RTC_RES_PROG_REG_SW_RES_PROG_SHIFT 0
+#define PALMAS_RTC_RES_PROG_REG_SW_RES_PROG_MASK 0x3F
+#define PALMAS_RTC_RES_PROG_REG_SW_RES_PROG_SHIFT 0x00
/* Bit definitions for RTC_RESET_STATUS_REG */
#define PALMAS_RTC_RESET_STATUS_REG_RESET_STATUS 0x01
-#define PALMAS_RTC_RESET_STATUS_REG_RESET_STATUS_SHIFT 0
+#define PALMAS_RTC_RESET_STATUS_REG_RESET_STATUS_SHIFT 0x00
/* Registers for function BACKUP */
-#define PALMAS_BACKUP0 0x0
-#define PALMAS_BACKUP1 0x1
-#define PALMAS_BACKUP2 0x2
-#define PALMAS_BACKUP3 0x3
-#define PALMAS_BACKUP4 0x4
-#define PALMAS_BACKUP5 0x5
-#define PALMAS_BACKUP6 0x6
-#define PALMAS_BACKUP7 0x7
+#define PALMAS_BACKUP0 0x00
+#define PALMAS_BACKUP1 0x01
+#define PALMAS_BACKUP2 0x02
+#define PALMAS_BACKUP3 0x03
+#define PALMAS_BACKUP4 0x04
+#define PALMAS_BACKUP5 0x05
+#define PALMAS_BACKUP6 0x06
+#define PALMAS_BACKUP7 0x07
/* Bit definitions for BACKUP0 */
-#define PALMAS_BACKUP0_BACKUP_MASK 0xff
-#define PALMAS_BACKUP0_BACKUP_SHIFT 0
+#define PALMAS_BACKUP0_BACKUP_MASK 0xFF
+#define PALMAS_BACKUP0_BACKUP_SHIFT 0x00
/* Bit definitions for BACKUP1 */
-#define PALMAS_BACKUP1_BACKUP_MASK 0xff
-#define PALMAS_BACKUP1_BACKUP_SHIFT 0
+#define PALMAS_BACKUP1_BACKUP_MASK 0xFF
+#define PALMAS_BACKUP1_BACKUP_SHIFT 0x00
/* Bit definitions for BACKUP2 */
-#define PALMAS_BACKUP2_BACKUP_MASK 0xff
-#define PALMAS_BACKUP2_BACKUP_SHIFT 0
+#define PALMAS_BACKUP2_BACKUP_MASK 0xFF
+#define PALMAS_BACKUP2_BACKUP_SHIFT 0x00
/* Bit definitions for BACKUP3 */
-#define PALMAS_BACKUP3_BACKUP_MASK 0xff
-#define PALMAS_BACKUP3_BACKUP_SHIFT 0
+#define PALMAS_BACKUP3_BACKUP_MASK 0xFF
+#define PALMAS_BACKUP3_BACKUP_SHIFT 0x00
/* Bit definitions for BACKUP4 */
-#define PALMAS_BACKUP4_BACKUP_MASK 0xff
-#define PALMAS_BACKUP4_BACKUP_SHIFT 0
+#define PALMAS_BACKUP4_BACKUP_MASK 0xFF
+#define PALMAS_BACKUP4_BACKUP_SHIFT 0x00
/* Bit definitions for BACKUP5 */
-#define PALMAS_BACKUP5_BACKUP_MASK 0xff
-#define PALMAS_BACKUP5_BACKUP_SHIFT 0
+#define PALMAS_BACKUP5_BACKUP_MASK 0xFF
+#define PALMAS_BACKUP5_BACKUP_SHIFT 0x00
/* Bit definitions for BACKUP6 */
-#define PALMAS_BACKUP6_BACKUP_MASK 0xff
-#define PALMAS_BACKUP6_BACKUP_SHIFT 0
+#define PALMAS_BACKUP6_BACKUP_MASK 0xFF
+#define PALMAS_BACKUP6_BACKUP_SHIFT 0x00
/* Bit definitions for BACKUP7 */
-#define PALMAS_BACKUP7_BACKUP_MASK 0xff
-#define PALMAS_BACKUP7_BACKUP_SHIFT 0
+#define PALMAS_BACKUP7_BACKUP_MASK 0xFF
+#define PALMAS_BACKUP7_BACKUP_SHIFT 0x00
/* Registers for function SMPS */
-#define PALMAS_SMPS12_CTRL 0x0
-#define PALMAS_SMPS12_TSTEP 0x1
-#define PALMAS_SMPS12_FORCE 0x2
-#define PALMAS_SMPS12_VOLTAGE 0x3
-#define PALMAS_SMPS3_CTRL 0x4
-#define PALMAS_SMPS3_VOLTAGE 0x7
-#define PALMAS_SMPS45_CTRL 0x8
-#define PALMAS_SMPS45_TSTEP 0x9
-#define PALMAS_SMPS45_FORCE 0xA
-#define PALMAS_SMPS45_VOLTAGE 0xB
-#define PALMAS_SMPS6_CTRL 0xC
-#define PALMAS_SMPS6_TSTEP 0xD
-#define PALMAS_SMPS6_FORCE 0xE
-#define PALMAS_SMPS6_VOLTAGE 0xF
+#define PALMAS_SMPS12_CTRL 0x00
+#define PALMAS_SMPS12_TSTEP 0x01
+#define PALMAS_SMPS12_FORCE 0x02
+#define PALMAS_SMPS12_VOLTAGE 0x03
+#define PALMAS_SMPS3_CTRL 0x04
+#define PALMAS_SMPS3_VOLTAGE 0x07
+#define PALMAS_SMPS45_CTRL 0x08
+#define PALMAS_SMPS45_TSTEP 0x09
+#define PALMAS_SMPS45_FORCE 0x0A
+#define PALMAS_SMPS45_VOLTAGE 0x0B
+#define PALMAS_SMPS6_CTRL 0x0C
+#define PALMAS_SMPS6_TSTEP 0x0D
+#define PALMAS_SMPS6_FORCE 0x0E
+#define PALMAS_SMPS6_VOLTAGE 0x0F
#define PALMAS_SMPS7_CTRL 0x10
#define PALMAS_SMPS7_VOLTAGE 0x13
#define PALMAS_SMPS8_CTRL 0x14
@@ -744,303 +744,303 @@ enum usb_irq_events {
/* Bit definitions for SMPS12_CTRL */
#define PALMAS_SMPS12_CTRL_WR_S 0x80
-#define PALMAS_SMPS12_CTRL_WR_S_SHIFT 7
+#define PALMAS_SMPS12_CTRL_WR_S_SHIFT 0x07
#define PALMAS_SMPS12_CTRL_ROOF_FLOOR_EN 0x40
-#define PALMAS_SMPS12_CTRL_ROOF_FLOOR_EN_SHIFT 6
+#define PALMAS_SMPS12_CTRL_ROOF_FLOOR_EN_SHIFT 0x06
#define PALMAS_SMPS12_CTRL_STATUS_MASK 0x30
-#define PALMAS_SMPS12_CTRL_STATUS_SHIFT 4
+#define PALMAS_SMPS12_CTRL_STATUS_SHIFT 0x04
#define PALMAS_SMPS12_CTRL_MODE_SLEEP_MASK 0x0c
-#define PALMAS_SMPS12_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_SMPS12_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK 0x03
-#define PALMAS_SMPS12_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_SMPS12_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for SMPS12_TSTEP */
#define PALMAS_SMPS12_TSTEP_TSTEP_MASK 0x03
-#define PALMAS_SMPS12_TSTEP_TSTEP_SHIFT 0
+#define PALMAS_SMPS12_TSTEP_TSTEP_SHIFT 0x00
/* Bit definitions for SMPS12_FORCE */
#define PALMAS_SMPS12_FORCE_CMD 0x80
-#define PALMAS_SMPS12_FORCE_CMD_SHIFT 7
-#define PALMAS_SMPS12_FORCE_VSEL_MASK 0x7f
-#define PALMAS_SMPS12_FORCE_VSEL_SHIFT 0
+#define PALMAS_SMPS12_FORCE_CMD_SHIFT 0x07
+#define PALMAS_SMPS12_FORCE_VSEL_MASK 0x7F
+#define PALMAS_SMPS12_FORCE_VSEL_SHIFT 0x00
/* Bit definitions for SMPS12_VOLTAGE */
#define PALMAS_SMPS12_VOLTAGE_RANGE 0x80
-#define PALMAS_SMPS12_VOLTAGE_RANGE_SHIFT 7
-#define PALMAS_SMPS12_VOLTAGE_VSEL_MASK 0x7f
-#define PALMAS_SMPS12_VOLTAGE_VSEL_SHIFT 0
+#define PALMAS_SMPS12_VOLTAGE_RANGE_SHIFT 0x07
+#define PALMAS_SMPS12_VOLTAGE_VSEL_MASK 0x7F
+#define PALMAS_SMPS12_VOLTAGE_VSEL_SHIFT 0x00
/* Bit definitions for SMPS3_CTRL */
#define PALMAS_SMPS3_CTRL_WR_S 0x80
-#define PALMAS_SMPS3_CTRL_WR_S_SHIFT 7
+#define PALMAS_SMPS3_CTRL_WR_S_SHIFT 0x07
#define PALMAS_SMPS3_CTRL_STATUS_MASK 0x30
-#define PALMAS_SMPS3_CTRL_STATUS_SHIFT 4
+#define PALMAS_SMPS3_CTRL_STATUS_SHIFT 0x04
#define PALMAS_SMPS3_CTRL_MODE_SLEEP_MASK 0x0c
-#define PALMAS_SMPS3_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_SMPS3_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_SMPS3_CTRL_MODE_ACTIVE_MASK 0x03
-#define PALMAS_SMPS3_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_SMPS3_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for SMPS3_VOLTAGE */
#define PALMAS_SMPS3_VOLTAGE_RANGE 0x80
-#define PALMAS_SMPS3_VOLTAGE_RANGE_SHIFT 7
-#define PALMAS_SMPS3_VOLTAGE_VSEL_MASK 0x7f
-#define PALMAS_SMPS3_VOLTAGE_VSEL_SHIFT 0
+#define PALMAS_SMPS3_VOLTAGE_RANGE_SHIFT 0x07
+#define PALMAS_SMPS3_VOLTAGE_VSEL_MASK 0x7F
+#define PALMAS_SMPS3_VOLTAGE_VSEL_SHIFT 0x00
/* Bit definitions for SMPS45_CTRL */
#define PALMAS_SMPS45_CTRL_WR_S 0x80
-#define PALMAS_SMPS45_CTRL_WR_S_SHIFT 7
+#define PALMAS_SMPS45_CTRL_WR_S_SHIFT 0x07
#define PALMAS_SMPS45_CTRL_ROOF_FLOOR_EN 0x40
-#define PALMAS_SMPS45_CTRL_ROOF_FLOOR_EN_SHIFT 6
+#define PALMAS_SMPS45_CTRL_ROOF_FLOOR_EN_SHIFT 0x06
#define PALMAS_SMPS45_CTRL_STATUS_MASK 0x30
-#define PALMAS_SMPS45_CTRL_STATUS_SHIFT 4
+#define PALMAS_SMPS45_CTRL_STATUS_SHIFT 0x04
#define PALMAS_SMPS45_CTRL_MODE_SLEEP_MASK 0x0c
-#define PALMAS_SMPS45_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_SMPS45_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_SMPS45_CTRL_MODE_ACTIVE_MASK 0x03
-#define PALMAS_SMPS45_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_SMPS45_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for SMPS45_TSTEP */
#define PALMAS_SMPS45_TSTEP_TSTEP_MASK 0x03
-#define PALMAS_SMPS45_TSTEP_TSTEP_SHIFT 0
+#define PALMAS_SMPS45_TSTEP_TSTEP_SHIFT 0x00
/* Bit definitions for SMPS45_FORCE */
#define PALMAS_SMPS45_FORCE_CMD 0x80
-#define PALMAS_SMPS45_FORCE_CMD_SHIFT 7
-#define PALMAS_SMPS45_FORCE_VSEL_MASK 0x7f
-#define PALMAS_SMPS45_FORCE_VSEL_SHIFT 0
+#define PALMAS_SMPS45_FORCE_CMD_SHIFT 0x07
+#define PALMAS_SMPS45_FORCE_VSEL_MASK 0x7F
+#define PALMAS_SMPS45_FORCE_VSEL_SHIFT 0x00
/* Bit definitions for SMPS45_VOLTAGE */
#define PALMAS_SMPS45_VOLTAGE_RANGE 0x80
-#define PALMAS_SMPS45_VOLTAGE_RANGE_SHIFT 7
-#define PALMAS_SMPS45_VOLTAGE_VSEL_MASK 0x7f
-#define PALMAS_SMPS45_VOLTAGE_VSEL_SHIFT 0
+#define PALMAS_SMPS45_VOLTAGE_RANGE_SHIFT 0x07
+#define PALMAS_SMPS45_VOLTAGE_VSEL_MASK 0x7F
+#define PALMAS_SMPS45_VOLTAGE_VSEL_SHIFT 0x00
/* Bit definitions for SMPS6_CTRL */
#define PALMAS_SMPS6_CTRL_WR_S 0x80
-#define PALMAS_SMPS6_CTRL_WR_S_SHIFT 7
+#define PALMAS_SMPS6_CTRL_WR_S_SHIFT 0x07
#define PALMAS_SMPS6_CTRL_ROOF_FLOOR_EN 0x40
-#define PALMAS_SMPS6_CTRL_ROOF_FLOOR_EN_SHIFT 6
+#define PALMAS_SMPS6_CTRL_ROOF_FLOOR_EN_SHIFT 0x06
#define PALMAS_SMPS6_CTRL_STATUS_MASK 0x30
-#define PALMAS_SMPS6_CTRL_STATUS_SHIFT 4
+#define PALMAS_SMPS6_CTRL_STATUS_SHIFT 0x04
#define PALMAS_SMPS6_CTRL_MODE_SLEEP_MASK 0x0c
-#define PALMAS_SMPS6_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_SMPS6_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_SMPS6_CTRL_MODE_ACTIVE_MASK 0x03
-#define PALMAS_SMPS6_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_SMPS6_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for SMPS6_TSTEP */
#define PALMAS_SMPS6_TSTEP_TSTEP_MASK 0x03
-#define PALMAS_SMPS6_TSTEP_TSTEP_SHIFT 0
+#define PALMAS_SMPS6_TSTEP_TSTEP_SHIFT 0x00
/* Bit definitions for SMPS6_FORCE */
#define PALMAS_SMPS6_FORCE_CMD 0x80
-#define PALMAS_SMPS6_FORCE_CMD_SHIFT 7
-#define PALMAS_SMPS6_FORCE_VSEL_MASK 0x7f
-#define PALMAS_SMPS6_FORCE_VSEL_SHIFT 0
+#define PALMAS_SMPS6_FORCE_CMD_SHIFT 0x07
+#define PALMAS_SMPS6_FORCE_VSEL_MASK 0x7F
+#define PALMAS_SMPS6_FORCE_VSEL_SHIFT 0x00
/* Bit definitions for SMPS6_VOLTAGE */
#define PALMAS_SMPS6_VOLTAGE_RANGE 0x80
-#define PALMAS_SMPS6_VOLTAGE_RANGE_SHIFT 7
-#define PALMAS_SMPS6_VOLTAGE_VSEL_MASK 0x7f
-#define PALMAS_SMPS6_VOLTAGE_VSEL_SHIFT 0
+#define PALMAS_SMPS6_VOLTAGE_RANGE_SHIFT 0x07
+#define PALMAS_SMPS6_VOLTAGE_VSEL_MASK 0x7F
+#define PALMAS_SMPS6_VOLTAGE_VSEL_SHIFT 0x00
/* Bit definitions for SMPS7_CTRL */
#define PALMAS_SMPS7_CTRL_WR_S 0x80
-#define PALMAS_SMPS7_CTRL_WR_S_SHIFT 7
+#define PALMAS_SMPS7_CTRL_WR_S_SHIFT 0x07
#define PALMAS_SMPS7_CTRL_STATUS_MASK 0x30
-#define PALMAS_SMPS7_CTRL_STATUS_SHIFT 4
+#define PALMAS_SMPS7_CTRL_STATUS_SHIFT 0x04
#define PALMAS_SMPS7_CTRL_MODE_SLEEP_MASK 0x0c
-#define PALMAS_SMPS7_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_SMPS7_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_SMPS7_CTRL_MODE_ACTIVE_MASK 0x03
-#define PALMAS_SMPS7_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_SMPS7_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for SMPS7_VOLTAGE */
#define PALMAS_SMPS7_VOLTAGE_RANGE 0x80
-#define PALMAS_SMPS7_VOLTAGE_RANGE_SHIFT 7
-#define PALMAS_SMPS7_VOLTAGE_VSEL_MASK 0x7f
-#define PALMAS_SMPS7_VOLTAGE_VSEL_SHIFT 0
+#define PALMAS_SMPS7_VOLTAGE_RANGE_SHIFT 0x07
+#define PALMAS_SMPS7_VOLTAGE_VSEL_MASK 0x7F
+#define PALMAS_SMPS7_VOLTAGE_VSEL_SHIFT 0x00
/* Bit definitions for SMPS8_CTRL */
#define PALMAS_SMPS8_CTRL_WR_S 0x80
-#define PALMAS_SMPS8_CTRL_WR_S_SHIFT 7
+#define PALMAS_SMPS8_CTRL_WR_S_SHIFT 0x07
#define PALMAS_SMPS8_CTRL_ROOF_FLOOR_EN 0x40
-#define PALMAS_SMPS8_CTRL_ROOF_FLOOR_EN_SHIFT 6
+#define PALMAS_SMPS8_CTRL_ROOF_FLOOR_EN_SHIFT 0x06
#define PALMAS_SMPS8_CTRL_STATUS_MASK 0x30
-#define PALMAS_SMPS8_CTRL_STATUS_SHIFT 4
+#define PALMAS_SMPS8_CTRL_STATUS_SHIFT 0x04
#define PALMAS_SMPS8_CTRL_MODE_SLEEP_MASK 0x0c
-#define PALMAS_SMPS8_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_SMPS8_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_SMPS8_CTRL_MODE_ACTIVE_MASK 0x03
-#define PALMAS_SMPS8_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_SMPS8_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for SMPS8_TSTEP */
#define PALMAS_SMPS8_TSTEP_TSTEP_MASK 0x03
-#define PALMAS_SMPS8_TSTEP_TSTEP_SHIFT 0
+#define PALMAS_SMPS8_TSTEP_TSTEP_SHIFT 0x00
/* Bit definitions for SMPS8_FORCE */
#define PALMAS_SMPS8_FORCE_CMD 0x80
-#define PALMAS_SMPS8_FORCE_CMD_SHIFT 7
-#define PALMAS_SMPS8_FORCE_VSEL_MASK 0x7f
-#define PALMAS_SMPS8_FORCE_VSEL_SHIFT 0
+#define PALMAS_SMPS8_FORCE_CMD_SHIFT 0x07
+#define PALMAS_SMPS8_FORCE_VSEL_MASK 0x7F
+#define PALMAS_SMPS8_FORCE_VSEL_SHIFT 0x00
/* Bit definitions for SMPS8_VOLTAGE */
#define PALMAS_SMPS8_VOLTAGE_RANGE 0x80
-#define PALMAS_SMPS8_VOLTAGE_RANGE_SHIFT 7
-#define PALMAS_SMPS8_VOLTAGE_VSEL_MASK 0x7f
-#define PALMAS_SMPS8_VOLTAGE_VSEL_SHIFT 0
+#define PALMAS_SMPS8_VOLTAGE_RANGE_SHIFT 0x07
+#define PALMAS_SMPS8_VOLTAGE_VSEL_MASK 0x7F
+#define PALMAS_SMPS8_VOLTAGE_VSEL_SHIFT 0x00
/* Bit definitions for SMPS9_CTRL */
#define PALMAS_SMPS9_CTRL_WR_S 0x80
-#define PALMAS_SMPS9_CTRL_WR_S_SHIFT 7
+#define PALMAS_SMPS9_CTRL_WR_S_SHIFT 0x07
#define PALMAS_SMPS9_CTRL_STATUS_MASK 0x30
-#define PALMAS_SMPS9_CTRL_STATUS_SHIFT 4
+#define PALMAS_SMPS9_CTRL_STATUS_SHIFT 0x04
#define PALMAS_SMPS9_CTRL_MODE_SLEEP_MASK 0x0c
-#define PALMAS_SMPS9_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_SMPS9_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_SMPS9_CTRL_MODE_ACTIVE_MASK 0x03
-#define PALMAS_SMPS9_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_SMPS9_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for SMPS9_VOLTAGE */
#define PALMAS_SMPS9_VOLTAGE_RANGE 0x80
-#define PALMAS_SMPS9_VOLTAGE_RANGE_SHIFT 7
-#define PALMAS_SMPS9_VOLTAGE_VSEL_MASK 0x7f
-#define PALMAS_SMPS9_VOLTAGE_VSEL_SHIFT 0
+#define PALMAS_SMPS9_VOLTAGE_RANGE_SHIFT 0x07
+#define PALMAS_SMPS9_VOLTAGE_VSEL_MASK 0x7F
+#define PALMAS_SMPS9_VOLTAGE_VSEL_SHIFT 0x00
/* Bit definitions for SMPS10_CTRL */
#define PALMAS_SMPS10_CTRL_MODE_SLEEP_MASK 0xf0
-#define PALMAS_SMPS10_CTRL_MODE_SLEEP_SHIFT 4
-#define PALMAS_SMPS10_CTRL_MODE_ACTIVE_MASK 0x0f
-#define PALMAS_SMPS10_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_SMPS10_CTRL_MODE_SLEEP_SHIFT 0x04
+#define PALMAS_SMPS10_CTRL_MODE_ACTIVE_MASK 0x0F
+#define PALMAS_SMPS10_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for SMPS10_STATUS */
-#define PALMAS_SMPS10_STATUS_STATUS_MASK 0x0f
-#define PALMAS_SMPS10_STATUS_STATUS_SHIFT 0
+#define PALMAS_SMPS10_STATUS_STATUS_MASK 0x0F
+#define PALMAS_SMPS10_STATUS_STATUS_SHIFT 0x00
/* Bit definitions for SMPS_CTRL */
#define PALMAS_SMPS_CTRL_SMPS45_SMPS457_EN 0x20
-#define PALMAS_SMPS_CTRL_SMPS45_SMPS457_EN_SHIFT 5
+#define PALMAS_SMPS_CTRL_SMPS45_SMPS457_EN_SHIFT 0x05
#define PALMAS_SMPS_CTRL_SMPS12_SMPS123_EN 0x10
-#define PALMAS_SMPS_CTRL_SMPS12_SMPS123_EN_SHIFT 4
+#define PALMAS_SMPS_CTRL_SMPS12_SMPS123_EN_SHIFT 0x04
#define PALMAS_SMPS_CTRL_SMPS45_PHASE_CTRL_MASK 0x0c
-#define PALMAS_SMPS_CTRL_SMPS45_PHASE_CTRL_SHIFT 2
+#define PALMAS_SMPS_CTRL_SMPS45_PHASE_CTRL_SHIFT 0x02
#define PALMAS_SMPS_CTRL_SMPS123_PHASE_CTRL_MASK 0x03
-#define PALMAS_SMPS_CTRL_SMPS123_PHASE_CTRL_SHIFT 0
+#define PALMAS_SMPS_CTRL_SMPS123_PHASE_CTRL_SHIFT 0x00
/* Bit definitions for SMPS_PD_CTRL */
#define PALMAS_SMPS_PD_CTRL_SMPS9 0x40
-#define PALMAS_SMPS_PD_CTRL_SMPS9_SHIFT 6
+#define PALMAS_SMPS_PD_CTRL_SMPS9_SHIFT 0x06
#define PALMAS_SMPS_PD_CTRL_SMPS8 0x20
-#define PALMAS_SMPS_PD_CTRL_SMPS8_SHIFT 5
+#define PALMAS_SMPS_PD_CTRL_SMPS8_SHIFT 0x05
#define PALMAS_SMPS_PD_CTRL_SMPS7 0x10
-#define PALMAS_SMPS_PD_CTRL_SMPS7_SHIFT 4
+#define PALMAS_SMPS_PD_CTRL_SMPS7_SHIFT 0x04
#define PALMAS_SMPS_PD_CTRL_SMPS6 0x08
-#define PALMAS_SMPS_PD_CTRL_SMPS6_SHIFT 3
+#define PALMAS_SMPS_PD_CTRL_SMPS6_SHIFT 0x03
#define PALMAS_SMPS_PD_CTRL_SMPS45 0x04
-#define PALMAS_SMPS_PD_CTRL_SMPS45_SHIFT 2
+#define PALMAS_SMPS_PD_CTRL_SMPS45_SHIFT 0x02
#define PALMAS_SMPS_PD_CTRL_SMPS3 0x02
-#define PALMAS_SMPS_PD_CTRL_SMPS3_SHIFT 1
+#define PALMAS_SMPS_PD_CTRL_SMPS3_SHIFT 0x01
#define PALMAS_SMPS_PD_CTRL_SMPS12 0x01
-#define PALMAS_SMPS_PD_CTRL_SMPS12_SHIFT 0
+#define PALMAS_SMPS_PD_CTRL_SMPS12_SHIFT 0x00
/* Bit definitions for SMPS_THERMAL_EN */
#define PALMAS_SMPS_THERMAL_EN_SMPS9 0x40
-#define PALMAS_SMPS_THERMAL_EN_SMPS9_SHIFT 6
+#define PALMAS_SMPS_THERMAL_EN_SMPS9_SHIFT 0x06
#define PALMAS_SMPS_THERMAL_EN_SMPS8 0x20
-#define PALMAS_SMPS_THERMAL_EN_SMPS8_SHIFT 5
+#define PALMAS_SMPS_THERMAL_EN_SMPS8_SHIFT 0x05
#define PALMAS_SMPS_THERMAL_EN_SMPS6 0x08
-#define PALMAS_SMPS_THERMAL_EN_SMPS6_SHIFT 3
+#define PALMAS_SMPS_THERMAL_EN_SMPS6_SHIFT 0x03
#define PALMAS_SMPS_THERMAL_EN_SMPS457 0x04
-#define PALMAS_SMPS_THERMAL_EN_SMPS457_SHIFT 2
+#define PALMAS_SMPS_THERMAL_EN_SMPS457_SHIFT 0x02
#define PALMAS_SMPS_THERMAL_EN_SMPS123 0x01
-#define PALMAS_SMPS_THERMAL_EN_SMPS123_SHIFT 0
+#define PALMAS_SMPS_THERMAL_EN_SMPS123_SHIFT 0x00
/* Bit definitions for SMPS_THERMAL_STATUS */
#define PALMAS_SMPS_THERMAL_STATUS_SMPS9 0x40
-#define PALMAS_SMPS_THERMAL_STATUS_SMPS9_SHIFT 6
+#define PALMAS_SMPS_THERMAL_STATUS_SMPS9_SHIFT 0x06
#define PALMAS_SMPS_THERMAL_STATUS_SMPS8 0x20
-#define PALMAS_SMPS_THERMAL_STATUS_SMPS8_SHIFT 5
+#define PALMAS_SMPS_THERMAL_STATUS_SMPS8_SHIFT 0x05
#define PALMAS_SMPS_THERMAL_STATUS_SMPS6 0x08
-#define PALMAS_SMPS_THERMAL_STATUS_SMPS6_SHIFT 3
+#define PALMAS_SMPS_THERMAL_STATUS_SMPS6_SHIFT 0x03
#define PALMAS_SMPS_THERMAL_STATUS_SMPS457 0x04
-#define PALMAS_SMPS_THERMAL_STATUS_SMPS457_SHIFT 2
+#define PALMAS_SMPS_THERMAL_STATUS_SMPS457_SHIFT 0x02
#define PALMAS_SMPS_THERMAL_STATUS_SMPS123 0x01
-#define PALMAS_SMPS_THERMAL_STATUS_SMPS123_SHIFT 0
+#define PALMAS_SMPS_THERMAL_STATUS_SMPS123_SHIFT 0x00
/* Bit definitions for SMPS_SHORT_STATUS */
#define PALMAS_SMPS_SHORT_STATUS_SMPS10 0x80
-#define PALMAS_SMPS_SHORT_STATUS_SMPS10_SHIFT 7
+#define PALMAS_SMPS_SHORT_STATUS_SMPS10_SHIFT 0x07
#define PALMAS_SMPS_SHORT_STATUS_SMPS9 0x40
-#define PALMAS_SMPS_SHORT_STATUS_SMPS9_SHIFT 6
+#define PALMAS_SMPS_SHORT_STATUS_SMPS9_SHIFT 0x06
#define PALMAS_SMPS_SHORT_STATUS_SMPS8 0x20
-#define PALMAS_SMPS_SHORT_STATUS_SMPS8_SHIFT 5
+#define PALMAS_SMPS_SHORT_STATUS_SMPS8_SHIFT 0x05
#define PALMAS_SMPS_SHORT_STATUS_SMPS7 0x10
-#define PALMAS_SMPS_SHORT_STATUS_SMPS7_SHIFT 4
+#define PALMAS_SMPS_SHORT_STATUS_SMPS7_SHIFT 0x04
#define PALMAS_SMPS_SHORT_STATUS_SMPS6 0x08
-#define PALMAS_SMPS_SHORT_STATUS_SMPS6_SHIFT 3
+#define PALMAS_SMPS_SHORT_STATUS_SMPS6_SHIFT 0x03
#define PALMAS_SMPS_SHORT_STATUS_SMPS45 0x04
-#define PALMAS_SMPS_SHORT_STATUS_SMPS45_SHIFT 2
+#define PALMAS_SMPS_SHORT_STATUS_SMPS45_SHIFT 0x02
#define PALMAS_SMPS_SHORT_STATUS_SMPS3 0x02
-#define PALMAS_SMPS_SHORT_STATUS_SMPS3_SHIFT 1
+#define PALMAS_SMPS_SHORT_STATUS_SMPS3_SHIFT 0x01
#define PALMAS_SMPS_SHORT_STATUS_SMPS12 0x01
-#define PALMAS_SMPS_SHORT_STATUS_SMPS12_SHIFT 0
+#define PALMAS_SMPS_SHORT_STATUS_SMPS12_SHIFT 0x00
/* Bit definitions for SMPS_NEGATIVE_CURRENT_LIMIT_EN */
#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS9 0x40
-#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS9_SHIFT 6
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS9_SHIFT 0x06
#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS8 0x20
-#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS8_SHIFT 5
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS8_SHIFT 0x05
#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS7 0x10
-#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS7_SHIFT 4
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS7_SHIFT 0x04
#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS6 0x08
-#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS6_SHIFT 3
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS6_SHIFT 0x03
#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS45 0x04
-#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS45_SHIFT 2
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS45_SHIFT 0x02
#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS3 0x02
-#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS3_SHIFT 1
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS3_SHIFT 0x01
#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS12 0x01
-#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS12_SHIFT 0
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS12_SHIFT 0x00
/* Bit definitions for SMPS_POWERGOOD_MASK1 */
#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS10 0x80
-#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS10_SHIFT 7
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS10_SHIFT 0x07
#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS9 0x40
-#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS9_SHIFT 6
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS9_SHIFT 0x06
#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS8 0x20
-#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS8_SHIFT 5
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS8_SHIFT 0x05
#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS7 0x10
-#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS7_SHIFT 4
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS7_SHIFT 0x04
#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS6 0x08
-#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS6_SHIFT 3
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS6_SHIFT 0x03
#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS45 0x04
-#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS45_SHIFT 2
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS45_SHIFT 0x02
#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS3 0x02
-#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS3_SHIFT 1
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS3_SHIFT 0x01
#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS12 0x01
-#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS12_SHIFT 0
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS12_SHIFT 0x00
/* Bit definitions for SMPS_POWERGOOD_MASK2 */
#define PALMAS_SMPS_POWERGOOD_MASK2_POWERGOOD_TYPE_SELECT 0x80
-#define PALMAS_SMPS_POWERGOOD_MASK2_POWERGOOD_TYPE_SELECT_SHIFT 7
+#define PALMAS_SMPS_POWERGOOD_MASK2_POWERGOOD_TYPE_SELECT_SHIFT 0x07
#define PALMAS_SMPS_POWERGOOD_MASK2_GPIO_7 0x04
-#define PALMAS_SMPS_POWERGOOD_MASK2_GPIO_7_SHIFT 2
+#define PALMAS_SMPS_POWERGOOD_MASK2_GPIO_7_SHIFT 0x02
#define PALMAS_SMPS_POWERGOOD_MASK2_VBUS 0x02
-#define PALMAS_SMPS_POWERGOOD_MASK2_VBUS_SHIFT 1
+#define PALMAS_SMPS_POWERGOOD_MASK2_VBUS_SHIFT 0x01
#define PALMAS_SMPS_POWERGOOD_MASK2_ACOK 0x01
-#define PALMAS_SMPS_POWERGOOD_MASK2_ACOK_SHIFT 0
+#define PALMAS_SMPS_POWERGOOD_MASK2_ACOK_SHIFT 0x00
/* Registers for function LDO */
-#define PALMAS_LDO1_CTRL 0x0
-#define PALMAS_LDO1_VOLTAGE 0x1
-#define PALMAS_LDO2_CTRL 0x2
-#define PALMAS_LDO2_VOLTAGE 0x3
-#define PALMAS_LDO3_CTRL 0x4
-#define PALMAS_LDO3_VOLTAGE 0x5
-#define PALMAS_LDO4_CTRL 0x6
-#define PALMAS_LDO4_VOLTAGE 0x7
-#define PALMAS_LDO5_CTRL 0x8
-#define PALMAS_LDO5_VOLTAGE 0x9
-#define PALMAS_LDO6_CTRL 0xA
-#define PALMAS_LDO6_VOLTAGE 0xB
-#define PALMAS_LDO7_CTRL 0xC
-#define PALMAS_LDO7_VOLTAGE 0xD
-#define PALMAS_LDO8_CTRL 0xE
-#define PALMAS_LDO8_VOLTAGE 0xF
+#define PALMAS_LDO1_CTRL 0x00
+#define PALMAS_LDO1_VOLTAGE 0x01
+#define PALMAS_LDO2_CTRL 0x02
+#define PALMAS_LDO2_VOLTAGE 0x03
+#define PALMAS_LDO3_CTRL 0x04
+#define PALMAS_LDO3_VOLTAGE 0x05
+#define PALMAS_LDO4_CTRL 0x06
+#define PALMAS_LDO4_VOLTAGE 0x07
+#define PALMAS_LDO5_CTRL 0x08
+#define PALMAS_LDO5_VOLTAGE 0x09
+#define PALMAS_LDO6_CTRL 0x0A
+#define PALMAS_LDO6_VOLTAGE 0x0B
+#define PALMAS_LDO7_CTRL 0x0C
+#define PALMAS_LDO7_VOLTAGE 0x0D
+#define PALMAS_LDO8_CTRL 0x0E
+#define PALMAS_LDO8_VOLTAGE 0x0F
#define PALMAS_LDO9_CTRL 0x10
#define PALMAS_LDO9_VOLTAGE 0x11
#define PALMAS_LDOLN_CTRL 0x12
@@ -1055,236 +1055,236 @@ enum usb_irq_events {
/* Bit definitions for LDO1_CTRL */
#define PALMAS_LDO1_CTRL_WR_S 0x80
-#define PALMAS_LDO1_CTRL_WR_S_SHIFT 7
+#define PALMAS_LDO1_CTRL_WR_S_SHIFT 0x07
#define PALMAS_LDO1_CTRL_STATUS 0x10
-#define PALMAS_LDO1_CTRL_STATUS_SHIFT 4
+#define PALMAS_LDO1_CTRL_STATUS_SHIFT 0x04
#define PALMAS_LDO1_CTRL_MODE_SLEEP 0x04
-#define PALMAS_LDO1_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_LDO1_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_LDO1_CTRL_MODE_ACTIVE 0x01
-#define PALMAS_LDO1_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_LDO1_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for LDO1_VOLTAGE */
-#define PALMAS_LDO1_VOLTAGE_VSEL_MASK 0x3f
-#define PALMAS_LDO1_VOLTAGE_VSEL_SHIFT 0
+#define PALMAS_LDO1_VOLTAGE_VSEL_MASK 0x3F
+#define PALMAS_LDO1_VOLTAGE_VSEL_SHIFT 0x00
/* Bit definitions for LDO2_CTRL */
#define PALMAS_LDO2_CTRL_WR_S 0x80
-#define PALMAS_LDO2_CTRL_WR_S_SHIFT 7
+#define PALMAS_LDO2_CTRL_WR_S_SHIFT 0x07
#define PALMAS_LDO2_CTRL_STATUS 0x10
-#define PALMAS_LDO2_CTRL_STATUS_SHIFT 4
+#define PALMAS_LDO2_CTRL_STATUS_SHIFT 0x04
#define PALMAS_LDO2_CTRL_MODE_SLEEP 0x04
-#define PALMAS_LDO2_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_LDO2_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_LDO2_CTRL_MODE_ACTIVE 0x01
-#define PALMAS_LDO2_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_LDO2_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for LDO2_VOLTAGE */
-#define PALMAS_LDO2_VOLTAGE_VSEL_MASK 0x3f
-#define PALMAS_LDO2_VOLTAGE_VSEL_SHIFT 0
+#define PALMAS_LDO2_VOLTAGE_VSEL_MASK 0x3F
+#define PALMAS_LDO2_VOLTAGE_VSEL_SHIFT 0x00
/* Bit definitions for LDO3_CTRL */
#define PALMAS_LDO3_CTRL_WR_S 0x80
-#define PALMAS_LDO3_CTRL_WR_S_SHIFT 7
+#define PALMAS_LDO3_CTRL_WR_S_SHIFT 0x07
#define PALMAS_LDO3_CTRL_STATUS 0x10
-#define PALMAS_LDO3_CTRL_STATUS_SHIFT 4
+#define PALMAS_LDO3_CTRL_STATUS_SHIFT 0x04
#define PALMAS_LDO3_CTRL_MODE_SLEEP 0x04
-#define PALMAS_LDO3_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_LDO3_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_LDO3_CTRL_MODE_ACTIVE 0x01
-#define PALMAS_LDO3_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_LDO3_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for LDO3_VOLTAGE */
-#define PALMAS_LDO3_VOLTAGE_VSEL_MASK 0x3f
-#define PALMAS_LDO3_VOLTAGE_VSEL_SHIFT 0
+#define PALMAS_LDO3_VOLTAGE_VSEL_MASK 0x3F
+#define PALMAS_LDO3_VOLTAGE_VSEL_SHIFT 0x00
/* Bit definitions for LDO4_CTRL */
#define PALMAS_LDO4_CTRL_WR_S 0x80
-#define PALMAS_LDO4_CTRL_WR_S_SHIFT 7
+#define PALMAS_LDO4_CTRL_WR_S_SHIFT 0x07
#define PALMAS_LDO4_CTRL_STATUS 0x10
-#define PALMAS_LDO4_CTRL_STATUS_SHIFT 4
+#define PALMAS_LDO4_CTRL_STATUS_SHIFT 0x04
#define PALMAS_LDO4_CTRL_MODE_SLEEP 0x04
-#define PALMAS_LDO4_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_LDO4_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_LDO4_CTRL_MODE_ACTIVE 0x01
-#define PALMAS_LDO4_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_LDO4_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for LDO4_VOLTAGE */
-#define PALMAS_LDO4_VOLTAGE_VSEL_MASK 0x3f
-#define PALMAS_LDO4_VOLTAGE_VSEL_SHIFT 0
+#define PALMAS_LDO4_VOLTAGE_VSEL_MASK 0x3F
+#define PALMAS_LDO4_VOLTAGE_VSEL_SHIFT 0x00
/* Bit definitions for LDO5_CTRL */
#define PALMAS_LDO5_CTRL_WR_S 0x80
-#define PALMAS_LDO5_CTRL_WR_S_SHIFT 7
+#define PALMAS_LDO5_CTRL_WR_S_SHIFT 0x07
#define PALMAS_LDO5_CTRL_STATUS 0x10
-#define PALMAS_LDO5_CTRL_STATUS_SHIFT 4
+#define PALMAS_LDO5_CTRL_STATUS_SHIFT 0x04
#define PALMAS_LDO5_CTRL_MODE_SLEEP 0x04
-#define PALMAS_LDO5_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_LDO5_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_LDO5_CTRL_MODE_ACTIVE 0x01
-#define PALMAS_LDO5_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_LDO5_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for LDO5_VOLTAGE */
-#define PALMAS_LDO5_VOLTAGE_VSEL_MASK 0x3f
-#define PALMAS_LDO5_VOLTAGE_VSEL_SHIFT 0
+#define PALMAS_LDO5_VOLTAGE_VSEL_MASK 0x3F
+#define PALMAS_LDO5_VOLTAGE_VSEL_SHIFT 0x00
/* Bit definitions for LDO6_CTRL */
#define PALMAS_LDO6_CTRL_WR_S 0x80
-#define PALMAS_LDO6_CTRL_WR_S_SHIFT 7
+#define PALMAS_LDO6_CTRL_WR_S_SHIFT 0x07
#define PALMAS_LDO6_CTRL_LDO_VIB_EN 0x40
-#define PALMAS_LDO6_CTRL_LDO_VIB_EN_SHIFT 6
+#define PALMAS_LDO6_CTRL_LDO_VIB_EN_SHIFT 0x06
#define PALMAS_LDO6_CTRL_STATUS 0x10
-#define PALMAS_LDO6_CTRL_STATUS_SHIFT 4
+#define PALMAS_LDO6_CTRL_STATUS_SHIFT 0x04
#define PALMAS_LDO6_CTRL_MODE_SLEEP 0x04
-#define PALMAS_LDO6_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_LDO6_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_LDO6_CTRL_MODE_ACTIVE 0x01
-#define PALMAS_LDO6_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_LDO6_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for LDO6_VOLTAGE */
-#define PALMAS_LDO6_VOLTAGE_VSEL_MASK 0x3f
-#define PALMAS_LDO6_VOLTAGE_VSEL_SHIFT 0
+#define PALMAS_LDO6_VOLTAGE_VSEL_MASK 0x3F
+#define PALMAS_LDO6_VOLTAGE_VSEL_SHIFT 0x00
/* Bit definitions for LDO7_CTRL */
#define PALMAS_LDO7_CTRL_WR_S 0x80
-#define PALMAS_LDO7_CTRL_WR_S_SHIFT 7
+#define PALMAS_LDO7_CTRL_WR_S_SHIFT 0x07
#define PALMAS_LDO7_CTRL_STATUS 0x10
-#define PALMAS_LDO7_CTRL_STATUS_SHIFT 4
+#define PALMAS_LDO7_CTRL_STATUS_SHIFT 0x04
#define PALMAS_LDO7_CTRL_MODE_SLEEP 0x04
-#define PALMAS_LDO7_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_LDO7_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_LDO7_CTRL_MODE_ACTIVE 0x01
-#define PALMAS_LDO7_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_LDO7_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for LDO7_VOLTAGE */
-#define PALMAS_LDO7_VOLTAGE_VSEL_MASK 0x3f
-#define PALMAS_LDO7_VOLTAGE_VSEL_SHIFT 0
+#define PALMAS_LDO7_VOLTAGE_VSEL_MASK 0x3F
+#define PALMAS_LDO7_VOLTAGE_VSEL_SHIFT 0x00
/* Bit definitions for LDO8_CTRL */
#define PALMAS_LDO8_CTRL_WR_S 0x80
-#define PALMAS_LDO8_CTRL_WR_S_SHIFT 7
+#define PALMAS_LDO8_CTRL_WR_S_SHIFT 0x07
#define PALMAS_LDO8_CTRL_LDO_TRACKING_EN 0x40
-#define PALMAS_LDO8_CTRL_LDO_TRACKING_EN_SHIFT 6
+#define PALMAS_LDO8_CTRL_LDO_TRACKING_EN_SHIFT 0x06
#define PALMAS_LDO8_CTRL_STATUS 0x10
-#define PALMAS_LDO8_CTRL_STATUS_SHIFT 4
+#define PALMAS_LDO8_CTRL_STATUS_SHIFT 0x04
#define PALMAS_LDO8_CTRL_MODE_SLEEP 0x04
-#define PALMAS_LDO8_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_LDO8_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_LDO8_CTRL_MODE_ACTIVE 0x01
-#define PALMAS_LDO8_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_LDO8_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for LDO8_VOLTAGE */
-#define PALMAS_LDO8_VOLTAGE_VSEL_MASK 0x3f
-#define PALMAS_LDO8_VOLTAGE_VSEL_SHIFT 0
+#define PALMAS_LDO8_VOLTAGE_VSEL_MASK 0x3F
+#define PALMAS_LDO8_VOLTAGE_VSEL_SHIFT 0x00
/* Bit definitions for LDO9_CTRL */
#define PALMAS_LDO9_CTRL_WR_S 0x80
-#define PALMAS_LDO9_CTRL_WR_S_SHIFT 7
+#define PALMAS_LDO9_CTRL_WR_S_SHIFT 0x07
#define PALMAS_LDO9_CTRL_LDO_BYPASS_EN 0x40
-#define PALMAS_LDO9_CTRL_LDO_BYPASS_EN_SHIFT 6
+#define PALMAS_LDO9_CTRL_LDO_BYPASS_EN_SHIFT 0x06
#define PALMAS_LDO9_CTRL_STATUS 0x10
-#define PALMAS_LDO9_CTRL_STATUS_SHIFT 4
+#define PALMAS_LDO9_CTRL_STATUS_SHIFT 0x04
#define PALMAS_LDO9_CTRL_MODE_SLEEP 0x04
-#define PALMAS_LDO9_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_LDO9_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_LDO9_CTRL_MODE_ACTIVE 0x01
-#define PALMAS_LDO9_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_LDO9_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for LDO9_VOLTAGE */
-#define PALMAS_LDO9_VOLTAGE_VSEL_MASK 0x3f
-#define PALMAS_LDO9_VOLTAGE_VSEL_SHIFT 0
+#define PALMAS_LDO9_VOLTAGE_VSEL_MASK 0x3F
+#define PALMAS_LDO9_VOLTAGE_VSEL_SHIFT 0x00
/* Bit definitions for LDOLN_CTRL */
#define PALMAS_LDOLN_CTRL_WR_S 0x80
-#define PALMAS_LDOLN_CTRL_WR_S_SHIFT 7
+#define PALMAS_LDOLN_CTRL_WR_S_SHIFT 0x07
#define PALMAS_LDOLN_CTRL_STATUS 0x10
-#define PALMAS_LDOLN_CTRL_STATUS_SHIFT 4
+#define PALMAS_LDOLN_CTRL_STATUS_SHIFT 0x04
#define PALMAS_LDOLN_CTRL_MODE_SLEEP 0x04
-#define PALMAS_LDOLN_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_LDOLN_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_LDOLN_CTRL_MODE_ACTIVE 0x01
-#define PALMAS_LDOLN_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_LDOLN_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for LDOLN_VOLTAGE */
-#define PALMAS_LDOLN_VOLTAGE_VSEL_MASK 0x3f
-#define PALMAS_LDOLN_VOLTAGE_VSEL_SHIFT 0
+#define PALMAS_LDOLN_VOLTAGE_VSEL_MASK 0x3F
+#define PALMAS_LDOLN_VOLTAGE_VSEL_SHIFT 0x00
/* Bit definitions for LDOUSB_CTRL */
#define PALMAS_LDOUSB_CTRL_WR_S 0x80
-#define PALMAS_LDOUSB_CTRL_WR_S_SHIFT 7
+#define PALMAS_LDOUSB_CTRL_WR_S_SHIFT 0x07
#define PALMAS_LDOUSB_CTRL_STATUS 0x10
-#define PALMAS_LDOUSB_CTRL_STATUS_SHIFT 4
+#define PALMAS_LDOUSB_CTRL_STATUS_SHIFT 0x04
#define PALMAS_LDOUSB_CTRL_MODE_SLEEP 0x04
-#define PALMAS_LDOUSB_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_LDOUSB_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_LDOUSB_CTRL_MODE_ACTIVE 0x01
-#define PALMAS_LDOUSB_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_LDOUSB_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for LDOUSB_VOLTAGE */
-#define PALMAS_LDOUSB_VOLTAGE_VSEL_MASK 0x3f
-#define PALMAS_LDOUSB_VOLTAGE_VSEL_SHIFT 0
+#define PALMAS_LDOUSB_VOLTAGE_VSEL_MASK 0x3F
+#define PALMAS_LDOUSB_VOLTAGE_VSEL_SHIFT 0x00
/* Bit definitions for LDO_CTRL */
#define PALMAS_LDO_CTRL_LDOUSB_ON_VBUS_VSYS 0x01
-#define PALMAS_LDO_CTRL_LDOUSB_ON_VBUS_VSYS_SHIFT 0
+#define PALMAS_LDO_CTRL_LDOUSB_ON_VBUS_VSYS_SHIFT 0x00
/* Bit definitions for LDO_PD_CTRL1 */
#define PALMAS_LDO_PD_CTRL1_LDO8 0x80
-#define PALMAS_LDO_PD_CTRL1_LDO8_SHIFT 7
+#define PALMAS_LDO_PD_CTRL1_LDO8_SHIFT 0x07
#define PALMAS_LDO_PD_CTRL1_LDO7 0x40
-#define PALMAS_LDO_PD_CTRL1_LDO7_SHIFT 6
+#define PALMAS_LDO_PD_CTRL1_LDO7_SHIFT 0x06
#define PALMAS_LDO_PD_CTRL1_LDO6 0x20
-#define PALMAS_LDO_PD_CTRL1_LDO6_SHIFT 5
+#define PALMAS_LDO_PD_CTRL1_LDO6_SHIFT 0x05
#define PALMAS_LDO_PD_CTRL1_LDO5 0x10
-#define PALMAS_LDO_PD_CTRL1_LDO5_SHIFT 4
+#define PALMAS_LDO_PD_CTRL1_LDO5_SHIFT 0x04
#define PALMAS_LDO_PD_CTRL1_LDO4 0x08
-#define PALMAS_LDO_PD_CTRL1_LDO4_SHIFT 3
+#define PALMAS_LDO_PD_CTRL1_LDO4_SHIFT 0x03
#define PALMAS_LDO_PD_CTRL1_LDO3 0x04
-#define PALMAS_LDO_PD_CTRL1_LDO3_SHIFT 2
+#define PALMAS_LDO_PD_CTRL1_LDO3_SHIFT 0x02
#define PALMAS_LDO_PD_CTRL1_LDO2 0x02
-#define PALMAS_LDO_PD_CTRL1_LDO2_SHIFT 1
+#define PALMAS_LDO_PD_CTRL1_LDO2_SHIFT 0x01
#define PALMAS_LDO_PD_CTRL1_LDO1 0x01
-#define PALMAS_LDO_PD_CTRL1_LDO1_SHIFT 0
+#define PALMAS_LDO_PD_CTRL1_LDO1_SHIFT 0x00
/* Bit definitions for LDO_PD_CTRL2 */
#define PALMAS_LDO_PD_CTRL2_LDOUSB 0x04
-#define PALMAS_LDO_PD_CTRL2_LDOUSB_SHIFT 2
+#define PALMAS_LDO_PD_CTRL2_LDOUSB_SHIFT 0x02
#define PALMAS_LDO_PD_CTRL2_LDOLN 0x02
-#define PALMAS_LDO_PD_CTRL2_LDOLN_SHIFT 1
+#define PALMAS_LDO_PD_CTRL2_LDOLN_SHIFT 0x01
#define PALMAS_LDO_PD_CTRL2_LDO9 0x01
-#define PALMAS_LDO_PD_CTRL2_LDO9_SHIFT 0
+#define PALMAS_LDO_PD_CTRL2_LDO9_SHIFT 0x00
/* Bit definitions for LDO_SHORT_STATUS1 */
#define PALMAS_LDO_SHORT_STATUS1_LDO8 0x80
-#define PALMAS_LDO_SHORT_STATUS1_LDO8_SHIFT 7
+#define PALMAS_LDO_SHORT_STATUS1_LDO8_SHIFT 0x07
#define PALMAS_LDO_SHORT_STATUS1_LDO7 0x40
-#define PALMAS_LDO_SHORT_STATUS1_LDO7_SHIFT 6
+#define PALMAS_LDO_SHORT_STATUS1_LDO7_SHIFT 0x06
#define PALMAS_LDO_SHORT_STATUS1_LDO6 0x20
-#define PALMAS_LDO_SHORT_STATUS1_LDO6_SHIFT 5
+#define PALMAS_LDO_SHORT_STATUS1_LDO6_SHIFT 0x05
#define PALMAS_LDO_SHORT_STATUS1_LDO5 0x10
-#define PALMAS_LDO_SHORT_STATUS1_LDO5_SHIFT 4
+#define PALMAS_LDO_SHORT_STATUS1_LDO5_SHIFT 0x04
#define PALMAS_LDO_SHORT_STATUS1_LDO4 0x08
-#define PALMAS_LDO_SHORT_STATUS1_LDO4_SHIFT 3
+#define PALMAS_LDO_SHORT_STATUS1_LDO4_SHIFT 0x03
#define PALMAS_LDO_SHORT_STATUS1_LDO3 0x04
-#define PALMAS_LDO_SHORT_STATUS1_LDO3_SHIFT 2
+#define PALMAS_LDO_SHORT_STATUS1_LDO3_SHIFT 0x02
#define PALMAS_LDO_SHORT_STATUS1_LDO2 0x02
-#define PALMAS_LDO_SHORT_STATUS1_LDO2_SHIFT 1
+#define PALMAS_LDO_SHORT_STATUS1_LDO2_SHIFT 0x01
#define PALMAS_LDO_SHORT_STATUS1_LDO1 0x01
-#define PALMAS_LDO_SHORT_STATUS1_LDO1_SHIFT 0
+#define PALMAS_LDO_SHORT_STATUS1_LDO1_SHIFT 0x00
/* Bit definitions for LDO_SHORT_STATUS2 */
#define PALMAS_LDO_SHORT_STATUS2_LDOVANA 0x08
-#define PALMAS_LDO_SHORT_STATUS2_LDOVANA_SHIFT 3
+#define PALMAS_LDO_SHORT_STATUS2_LDOVANA_SHIFT 0x03
#define PALMAS_LDO_SHORT_STATUS2_LDOUSB 0x04
-#define PALMAS_LDO_SHORT_STATUS2_LDOUSB_SHIFT 2
+#define PALMAS_LDO_SHORT_STATUS2_LDOUSB_SHIFT 0x02
#define PALMAS_LDO_SHORT_STATUS2_LDOLN 0x02
-#define PALMAS_LDO_SHORT_STATUS2_LDOLN_SHIFT 1
+#define PALMAS_LDO_SHORT_STATUS2_LDOLN_SHIFT 0x01
#define PALMAS_LDO_SHORT_STATUS2_LDO9 0x01
-#define PALMAS_LDO_SHORT_STATUS2_LDO9_SHIFT 0
+#define PALMAS_LDO_SHORT_STATUS2_LDO9_SHIFT 0x00
/* Registers for function PMU_CONTROL */
-#define PALMAS_DEV_CTRL 0x0
-#define PALMAS_POWER_CTRL 0x1
-#define PALMAS_VSYS_LO 0x2
-#define PALMAS_VSYS_MON 0x3
-#define PALMAS_VBAT_MON 0x4
-#define PALMAS_WATCHDOG 0x5
-#define PALMAS_BOOT_STATUS 0x6
-#define PALMAS_BATTERY_BOUNCE 0x7
-#define PALMAS_BACKUP_BATTERY_CTRL 0x8
-#define PALMAS_LONG_PRESS_KEY 0x9
-#define PALMAS_OSC_THERM_CTRL 0xA
-#define PALMAS_BATDEBOUNCING 0xB
-#define PALMAS_SWOFF_HWRST 0xF
+#define PALMAS_DEV_CTRL 0x00
+#define PALMAS_POWER_CTRL 0x01
+#define PALMAS_VSYS_LO 0x02
+#define PALMAS_VSYS_MON 0x03
+#define PALMAS_VBAT_MON 0x04
+#define PALMAS_WATCHDOG 0x05
+#define PALMAS_BOOT_STATUS 0x06
+#define PALMAS_BATTERY_BOUNCE 0x07
+#define PALMAS_BACKUP_BATTERY_CTRL 0x08
+#define PALMAS_LONG_PRESS_KEY 0x09
+#define PALMAS_OSC_THERM_CTRL 0x0A
+#define PALMAS_BATDEBOUNCING 0x0B
+#define PALMAS_SWOFF_HWRST 0x0F
#define PALMAS_SWOFF_COLDRST 0x10
#define PALMAS_SWOFF_STATUS 0x11
#define PALMAS_PMU_CONFIG 0x12
@@ -1296,668 +1296,668 @@ enum usb_irq_events {
/* Bit definitions for DEV_CTRL */
#define PALMAS_DEV_CTRL_DEV_STATUS_MASK 0x0c
-#define PALMAS_DEV_CTRL_DEV_STATUS_SHIFT 2
+#define PALMAS_DEV_CTRL_DEV_STATUS_SHIFT 0x02
#define PALMAS_DEV_CTRL_SW_RST 0x02
-#define PALMAS_DEV_CTRL_SW_RST_SHIFT 1
+#define PALMAS_DEV_CTRL_SW_RST_SHIFT 0x01
#define PALMAS_DEV_CTRL_DEV_ON 0x01
-#define PALMAS_DEV_CTRL_DEV_ON_SHIFT 0
+#define PALMAS_DEV_CTRL_DEV_ON_SHIFT 0x00
/* Bit definitions for POWER_CTRL */
#define PALMAS_POWER_CTRL_ENABLE2_MASK 0x04
-#define PALMAS_POWER_CTRL_ENABLE2_MASK_SHIFT 2
+#define PALMAS_POWER_CTRL_ENABLE2_MASK_SHIFT 0x02
#define PALMAS_POWER_CTRL_ENABLE1_MASK 0x02
-#define PALMAS_POWER_CTRL_ENABLE1_MASK_SHIFT 1
+#define PALMAS_POWER_CTRL_ENABLE1_MASK_SHIFT 0x01
#define PALMAS_POWER_CTRL_NSLEEP_MASK 0x01
-#define PALMAS_POWER_CTRL_NSLEEP_MASK_SHIFT 0
+#define PALMAS_POWER_CTRL_NSLEEP_MASK_SHIFT 0x00
/* Bit definitions for VSYS_LO */
-#define PALMAS_VSYS_LO_THRESHOLD_MASK 0x1f
-#define PALMAS_VSYS_LO_THRESHOLD_SHIFT 0
+#define PALMAS_VSYS_LO_THRESHOLD_MASK 0x1F
+#define PALMAS_VSYS_LO_THRESHOLD_SHIFT 0x00
/* Bit definitions for VSYS_MON */
#define PALMAS_VSYS_MON_ENABLE 0x80
-#define PALMAS_VSYS_MON_ENABLE_SHIFT 7
-#define PALMAS_VSYS_MON_THRESHOLD_MASK 0x3f
-#define PALMAS_VSYS_MON_THRESHOLD_SHIFT 0
+#define PALMAS_VSYS_MON_ENABLE_SHIFT 0x07
+#define PALMAS_VSYS_MON_THRESHOLD_MASK 0x3F
+#define PALMAS_VSYS_MON_THRESHOLD_SHIFT 0x00
/* Bit definitions for VBAT_MON */
#define PALMAS_VBAT_MON_ENABLE 0x80
-#define PALMAS_VBAT_MON_ENABLE_SHIFT 7
-#define PALMAS_VBAT_MON_THRESHOLD_MASK 0x3f
-#define PALMAS_VBAT_MON_THRESHOLD_SHIFT 0
+#define PALMAS_VBAT_MON_ENABLE_SHIFT 0x07
+#define PALMAS_VBAT_MON_THRESHOLD_MASK 0x3F
+#define PALMAS_VBAT_MON_THRESHOLD_SHIFT 0x00
/* Bit definitions for WATCHDOG */
#define PALMAS_WATCHDOG_LOCK 0x20
-#define PALMAS_WATCHDOG_LOCK_SHIFT 5
+#define PALMAS_WATCHDOG_LOCK_SHIFT 0x05
#define PALMAS_WATCHDOG_ENABLE 0x10
-#define PALMAS_WATCHDOG_ENABLE_SHIFT 4
+#define PALMAS_WATCHDOG_ENABLE_SHIFT 0x04
#define PALMAS_WATCHDOG_MODE 0x08
-#define PALMAS_WATCHDOG_MODE_SHIFT 3
+#define PALMAS_WATCHDOG_MODE_SHIFT 0x03
#define PALMAS_WATCHDOG_TIMER_MASK 0x07
-#define PALMAS_WATCHDOG_TIMER_SHIFT 0
+#define PALMAS_WATCHDOG_TIMER_SHIFT 0x00
/* Bit definitions for BOOT_STATUS */
#define PALMAS_BOOT_STATUS_BOOT1 0x02
-#define PALMAS_BOOT_STATUS_BOOT1_SHIFT 1
+#define PALMAS_BOOT_STATUS_BOOT1_SHIFT 0x01
#define PALMAS_BOOT_STATUS_BOOT0 0x01
-#define PALMAS_BOOT_STATUS_BOOT0_SHIFT 0
+#define PALMAS_BOOT_STATUS_BOOT0_SHIFT 0x00
/* Bit definitions for BATTERY_BOUNCE */
-#define PALMAS_BATTERY_BOUNCE_BB_DELAY_MASK 0x3f
-#define PALMAS_BATTERY_BOUNCE_BB_DELAY_SHIFT 0
+#define PALMAS_BATTERY_BOUNCE_BB_DELAY_MASK 0x3F
+#define PALMAS_BATTERY_BOUNCE_BB_DELAY_SHIFT 0x00
/* Bit definitions for BACKUP_BATTERY_CTRL */
#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_18_15 0x80
-#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_18_15_SHIFT 7
+#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_18_15_SHIFT 0x07
#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_EN_SLP 0x40
-#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_EN_SLP_SHIFT 6
+#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_EN_SLP_SHIFT 0x06
#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_EN_OFF 0x20
-#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_EN_OFF_SHIFT 5
+#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_EN_OFF_SHIFT 0x05
#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_PWEN 0x10
-#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_PWEN_SHIFT 4
+#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_PWEN_SHIFT 0x04
#define PALMAS_BACKUP_BATTERY_CTRL_BBS_BBC_LOW_ICHRG 0x08
-#define PALMAS_BACKUP_BATTERY_CTRL_BBS_BBC_LOW_ICHRG_SHIFT 3
+#define PALMAS_BACKUP_BATTERY_CTRL_BBS_BBC_LOW_ICHRG_SHIFT 0x03
#define PALMAS_BACKUP_BATTERY_CTRL_BB_SEL_MASK 0x06
-#define PALMAS_BACKUP_BATTERY_CTRL_BB_SEL_SHIFT 1
+#define PALMAS_BACKUP_BATTERY_CTRL_BB_SEL_SHIFT 0x01
#define PALMAS_BACKUP_BATTERY_CTRL_BB_CHG_EN 0x01
-#define PALMAS_BACKUP_BATTERY_CTRL_BB_CHG_EN_SHIFT 0
+#define PALMAS_BACKUP_BATTERY_CTRL_BB_CHG_EN_SHIFT 0x00
/* Bit definitions for LONG_PRESS_KEY */
#define PALMAS_LONG_PRESS_KEY_LPK_LOCK 0x80
-#define PALMAS_LONG_PRESS_KEY_LPK_LOCK_SHIFT 7
+#define PALMAS_LONG_PRESS_KEY_LPK_LOCK_SHIFT 0x07
#define PALMAS_LONG_PRESS_KEY_LPK_INT_CLR 0x10
-#define PALMAS_LONG_PRESS_KEY_LPK_INT_CLR_SHIFT 4
+#define PALMAS_LONG_PRESS_KEY_LPK_INT_CLR_SHIFT 0x04
#define PALMAS_LONG_PRESS_KEY_LPK_TIME_MASK 0x0c
-#define PALMAS_LONG_PRESS_KEY_LPK_TIME_SHIFT 2
+#define PALMAS_LONG_PRESS_KEY_LPK_TIME_SHIFT 0x02
#define PALMAS_LONG_PRESS_KEY_PWRON_DEBOUNCE_MASK 0x03
-#define PALMAS_LONG_PRESS_KEY_PWRON_DEBOUNCE_SHIFT 0
+#define PALMAS_LONG_PRESS_KEY_PWRON_DEBOUNCE_SHIFT 0x00
/* Bit definitions for OSC_THERM_CTRL */
#define PALMAS_OSC_THERM_CTRL_VANA_ON_IN_SLEEP 0x80
-#define PALMAS_OSC_THERM_CTRL_VANA_ON_IN_SLEEP_SHIFT 7
+#define PALMAS_OSC_THERM_CTRL_VANA_ON_IN_SLEEP_SHIFT 0x07
#define PALMAS_OSC_THERM_CTRL_INT_MASK_IN_SLEEP 0x40
-#define PALMAS_OSC_THERM_CTRL_INT_MASK_IN_SLEEP_SHIFT 6
+#define PALMAS_OSC_THERM_CTRL_INT_MASK_IN_SLEEP_SHIFT 0x06
#define PALMAS_OSC_THERM_CTRL_RC15MHZ_ON_IN_SLEEP 0x20
-#define PALMAS_OSC_THERM_CTRL_RC15MHZ_ON_IN_SLEEP_SHIFT 5
+#define PALMAS_OSC_THERM_CTRL_RC15MHZ_ON_IN_SLEEP_SHIFT 0x05
#define PALMAS_OSC_THERM_CTRL_THERM_OFF_IN_SLEEP 0x10
-#define PALMAS_OSC_THERM_CTRL_THERM_OFF_IN_SLEEP_SHIFT 4
+#define PALMAS_OSC_THERM_CTRL_THERM_OFF_IN_SLEEP_SHIFT 0x04
#define PALMAS_OSC_THERM_CTRL_THERM_HD_SEL_MASK 0x0c
-#define PALMAS_OSC_THERM_CTRL_THERM_HD_SEL_SHIFT 2
+#define PALMAS_OSC_THERM_CTRL_THERM_HD_SEL_SHIFT 0x02
#define PALMAS_OSC_THERM_CTRL_OSC_BYPASS 0x02
-#define PALMAS_OSC_THERM_CTRL_OSC_BYPASS_SHIFT 1
+#define PALMAS_OSC_THERM_CTRL_OSC_BYPASS_SHIFT 0x01
#define PALMAS_OSC_THERM_CTRL_OSC_HPMODE 0x01
-#define PALMAS_OSC_THERM_CTRL_OSC_HPMODE_SHIFT 0
+#define PALMAS_OSC_THERM_CTRL_OSC_HPMODE_SHIFT 0x00
/* Bit definitions for BATDEBOUNCING */
#define PALMAS_BATDEBOUNCING_BAT_DEB_BYPASS 0x80
-#define PALMAS_BATDEBOUNCING_BAT_DEB_BYPASS_SHIFT 7
+#define PALMAS_BATDEBOUNCING_BAT_DEB_BYPASS_SHIFT 0x07
#define PALMAS_BATDEBOUNCING_BINS_DEB_MASK 0x78
-#define PALMAS_BATDEBOUNCING_BINS_DEB_SHIFT 3
+#define PALMAS_BATDEBOUNCING_BINS_DEB_SHIFT 0x03
#define PALMAS_BATDEBOUNCING_BEXT_DEB_MASK 0x07
-#define PALMAS_BATDEBOUNCING_BEXT_DEB_SHIFT 0
+#define PALMAS_BATDEBOUNCING_BEXT_DEB_SHIFT 0x00
/* Bit definitions for SWOFF_HWRST */
#define PALMAS_SWOFF_HWRST_PWRON_LPK 0x80
-#define PALMAS_SWOFF_HWRST_PWRON_LPK_SHIFT 7
+#define PALMAS_SWOFF_HWRST_PWRON_LPK_SHIFT 0x07
#define PALMAS_SWOFF_HWRST_PWRDOWN 0x40
-#define PALMAS_SWOFF_HWRST_PWRDOWN_SHIFT 6
+#define PALMAS_SWOFF_HWRST_PWRDOWN_SHIFT 0x06
#define PALMAS_SWOFF_HWRST_WTD 0x20
-#define PALMAS_SWOFF_HWRST_WTD_SHIFT 5
+#define PALMAS_SWOFF_HWRST_WTD_SHIFT 0x05
#define PALMAS_SWOFF_HWRST_TSHUT 0x10
-#define PALMAS_SWOFF_HWRST_TSHUT_SHIFT 4
+#define PALMAS_SWOFF_HWRST_TSHUT_SHIFT 0x04
#define PALMAS_SWOFF_HWRST_RESET_IN 0x08
-#define PALMAS_SWOFF_HWRST_RESET_IN_SHIFT 3
+#define PALMAS_SWOFF_HWRST_RESET_IN_SHIFT 0x03
#define PALMAS_SWOFF_HWRST_SW_RST 0x04
-#define PALMAS_SWOFF_HWRST_SW_RST_SHIFT 2
+#define PALMAS_SWOFF_HWRST_SW_RST_SHIFT 0x02
#define PALMAS_SWOFF_HWRST_VSYS_LO 0x02
-#define PALMAS_SWOFF_HWRST_VSYS_LO_SHIFT 1
+#define PALMAS_SWOFF_HWRST_VSYS_LO_SHIFT 0x01
#define PALMAS_SWOFF_HWRST_GPADC_SHUTDOWN 0x01
-#define PALMAS_SWOFF_HWRST_GPADC_SHUTDOWN_SHIFT 0
+#define PALMAS_SWOFF_HWRST_GPADC_SHUTDOWN_SHIFT 0x00
/* Bit definitions for SWOFF_COLDRST */
#define PALMAS_SWOFF_COLDRST_PWRON_LPK 0x80
-#define PALMAS_SWOFF_COLDRST_PWRON_LPK_SHIFT 7
+#define PALMAS_SWOFF_COLDRST_PWRON_LPK_SHIFT 0x07
#define PALMAS_SWOFF_COLDRST_PWRDOWN 0x40
-#define PALMAS_SWOFF_COLDRST_PWRDOWN_SHIFT 6
+#define PALMAS_SWOFF_COLDRST_PWRDOWN_SHIFT 0x06
#define PALMAS_SWOFF_COLDRST_WTD 0x20
-#define PALMAS_SWOFF_COLDRST_WTD_SHIFT 5
+#define PALMAS_SWOFF_COLDRST_WTD_SHIFT 0x05
#define PALMAS_SWOFF_COLDRST_TSHUT 0x10
-#define PALMAS_SWOFF_COLDRST_TSHUT_SHIFT 4
+#define PALMAS_SWOFF_COLDRST_TSHUT_SHIFT 0x04
#define PALMAS_SWOFF_COLDRST_RESET_IN 0x08
-#define PALMAS_SWOFF_COLDRST_RESET_IN_SHIFT 3
+#define PALMAS_SWOFF_COLDRST_RESET_IN_SHIFT 0x03
#define PALMAS_SWOFF_COLDRST_SW_RST 0x04
-#define PALMAS_SWOFF_COLDRST_SW_RST_SHIFT 2
+#define PALMAS_SWOFF_COLDRST_SW_RST_SHIFT 0x02
#define PALMAS_SWOFF_COLDRST_VSYS_LO 0x02
-#define PALMAS_SWOFF_COLDRST_VSYS_LO_SHIFT 1
+#define PALMAS_SWOFF_COLDRST_VSYS_LO_SHIFT 0x01
#define PALMAS_SWOFF_COLDRST_GPADC_SHUTDOWN 0x01
-#define PALMAS_SWOFF_COLDRST_GPADC_SHUTDOWN_SHIFT 0
+#define PALMAS_SWOFF_COLDRST_GPADC_SHUTDOWN_SHIFT 0x00
/* Bit definitions for SWOFF_STATUS */
#define PALMAS_SWOFF_STATUS_PWRON_LPK 0x80
-#define PALMAS_SWOFF_STATUS_PWRON_LPK_SHIFT 7
+#define PALMAS_SWOFF_STATUS_PWRON_LPK_SHIFT 0x07
#define PALMAS_SWOFF_STATUS_PWRDOWN 0x40
-#define PALMAS_SWOFF_STATUS_PWRDOWN_SHIFT 6
+#define PALMAS_SWOFF_STATUS_PWRDOWN_SHIFT 0x06
#define PALMAS_SWOFF_STATUS_WTD 0x20
-#define PALMAS_SWOFF_STATUS_WTD_SHIFT 5
+#define PALMAS_SWOFF_STATUS_WTD_SHIFT 0x05
#define PALMAS_SWOFF_STATUS_TSHUT 0x10
-#define PALMAS_SWOFF_STATUS_TSHUT_SHIFT 4
+#define PALMAS_SWOFF_STATUS_TSHUT_SHIFT 0x04
#define PALMAS_SWOFF_STATUS_RESET_IN 0x08
-#define PALMAS_SWOFF_STATUS_RESET_IN_SHIFT 3
+#define PALMAS_SWOFF_STATUS_RESET_IN_SHIFT 0x03
#define PALMAS_SWOFF_STATUS_SW_RST 0x04
-#define PALMAS_SWOFF_STATUS_SW_RST_SHIFT 2
+#define PALMAS_SWOFF_STATUS_SW_RST_SHIFT 0x02
#define PALMAS_SWOFF_STATUS_VSYS_LO 0x02
-#define PALMAS_SWOFF_STATUS_VSYS_LO_SHIFT 1
+#define PALMAS_SWOFF_STATUS_VSYS_LO_SHIFT 0x01
#define PALMAS_SWOFF_STATUS_GPADC_SHUTDOWN 0x01
-#define PALMAS_SWOFF_STATUS_GPADC_SHUTDOWN_SHIFT 0
+#define PALMAS_SWOFF_STATUS_GPADC_SHUTDOWN_SHIFT 0x00
/* Bit definitions for PMU_CONFIG */
#define PALMAS_PMU_CONFIG_MULTI_CELL_EN 0x40
-#define PALMAS_PMU_CONFIG_MULTI_CELL_EN_SHIFT 6
+#define PALMAS_PMU_CONFIG_MULTI_CELL_EN_SHIFT 0x06
#define PALMAS_PMU_CONFIG_SPARE_MASK 0x30
-#define PALMAS_PMU_CONFIG_SPARE_SHIFT 4
+#define PALMAS_PMU_CONFIG_SPARE_SHIFT 0x04
#define PALMAS_PMU_CONFIG_SWOFF_DLY_MASK 0x0c
-#define PALMAS_PMU_CONFIG_SWOFF_DLY_SHIFT 2
+#define PALMAS_PMU_CONFIG_SWOFF_DLY_SHIFT 0x02
#define PALMAS_PMU_CONFIG_GATE_RESET_OUT 0x02
-#define PALMAS_PMU_CONFIG_GATE_RESET_OUT_SHIFT 1
+#define PALMAS_PMU_CONFIG_GATE_RESET_OUT_SHIFT 0x01
#define PALMAS_PMU_CONFIG_AUTODEVON 0x01
-#define PALMAS_PMU_CONFIG_AUTODEVON_SHIFT 0
+#define PALMAS_PMU_CONFIG_AUTODEVON_SHIFT 0x00
/* Bit definitions for SPARE */
#define PALMAS_SPARE_SPARE_MASK 0xf8
-#define PALMAS_SPARE_SPARE_SHIFT 3
+#define PALMAS_SPARE_SPARE_SHIFT 0x03
#define PALMAS_SPARE_REGEN3_OD 0x04
-#define PALMAS_SPARE_REGEN3_OD_SHIFT 2
+#define PALMAS_SPARE_REGEN3_OD_SHIFT 0x02
#define PALMAS_SPARE_REGEN2_OD 0x02
-#define PALMAS_SPARE_REGEN2_OD_SHIFT 1
+#define PALMAS_SPARE_REGEN2_OD_SHIFT 0x01
#define PALMAS_SPARE_REGEN1_OD 0x01
-#define PALMAS_SPARE_REGEN1_OD_SHIFT 0
+#define PALMAS_SPARE_REGEN1_OD_SHIFT 0x00
/* Bit definitions for PMU_SECONDARY_INT */
#define PALMAS_PMU_SECONDARY_INT_VBUS_OVV_INT_SRC 0x80
-#define PALMAS_PMU_SECONDARY_INT_VBUS_OVV_INT_SRC_SHIFT 7
+#define PALMAS_PMU_SECONDARY_INT_VBUS_OVV_INT_SRC_SHIFT 0x07
#define PALMAS_PMU_SECONDARY_INT_CHARG_DET_N_INT_SRC 0x40
-#define PALMAS_PMU_SECONDARY_INT_CHARG_DET_N_INT_SRC_SHIFT 6
+#define PALMAS_PMU_SECONDARY_INT_CHARG_DET_N_INT_SRC_SHIFT 0x06
#define PALMAS_PMU_SECONDARY_INT_BB_INT_SRC 0x20
-#define PALMAS_PMU_SECONDARY_INT_BB_INT_SRC_SHIFT 5
+#define PALMAS_PMU_SECONDARY_INT_BB_INT_SRC_SHIFT 0x05
#define PALMAS_PMU_SECONDARY_INT_FBI_INT_SRC 0x10
-#define PALMAS_PMU_SECONDARY_INT_FBI_INT_SRC_SHIFT 4
+#define PALMAS_PMU_SECONDARY_INT_FBI_INT_SRC_SHIFT 0x04
#define PALMAS_PMU_SECONDARY_INT_VBUS_OVV_MASK 0x08
-#define PALMAS_PMU_SECONDARY_INT_VBUS_OVV_MASK_SHIFT 3
+#define PALMAS_PMU_SECONDARY_INT_VBUS_OVV_MASK_SHIFT 0x03
#define PALMAS_PMU_SECONDARY_INT_CHARG_DET_N_MASK 0x04
-#define PALMAS_PMU_SECONDARY_INT_CHARG_DET_N_MASK_SHIFT 2
+#define PALMAS_PMU_SECONDARY_INT_CHARG_DET_N_MASK_SHIFT 0x02
#define PALMAS_PMU_SECONDARY_INT_BB_MASK 0x02
-#define PALMAS_PMU_SECONDARY_INT_BB_MASK_SHIFT 1
+#define PALMAS_PMU_SECONDARY_INT_BB_MASK_SHIFT 0x01
#define PALMAS_PMU_SECONDARY_INT_FBI_MASK 0x01
-#define PALMAS_PMU_SECONDARY_INT_FBI_MASK_SHIFT 0
+#define PALMAS_PMU_SECONDARY_INT_FBI_MASK_SHIFT 0x00
/* Bit definitions for SW_REVISION */
-#define PALMAS_SW_REVISION_SW_REVISION_MASK 0xff
-#define PALMAS_SW_REVISION_SW_REVISION_SHIFT 0
+#define PALMAS_SW_REVISION_SW_REVISION_MASK 0xFF
+#define PALMAS_SW_REVISION_SW_REVISION_SHIFT 0x00
/* Bit definitions for EXT_CHRG_CTRL */
#define PALMAS_EXT_CHRG_CTRL_VBUS_OVV_STATUS 0x80
-#define PALMAS_EXT_CHRG_CTRL_VBUS_OVV_STATUS_SHIFT 7
+#define PALMAS_EXT_CHRG_CTRL_VBUS_OVV_STATUS_SHIFT 0x07
#define PALMAS_EXT_CHRG_CTRL_CHARG_DET_N_STATUS 0x40
-#define PALMAS_EXT_CHRG_CTRL_CHARG_DET_N_STATUS_SHIFT 6
+#define PALMAS_EXT_CHRG_CTRL_CHARG_DET_N_STATUS_SHIFT 0x06
#define PALMAS_EXT_CHRG_CTRL_VSYS_DEBOUNCE_DELAY 0x08
-#define PALMAS_EXT_CHRG_CTRL_VSYS_DEBOUNCE_DELAY_SHIFT 3
+#define PALMAS_EXT_CHRG_CTRL_VSYS_DEBOUNCE_DELAY_SHIFT 0x03
#define PALMAS_EXT_CHRG_CTRL_CHRG_DET_N 0x04
-#define PALMAS_EXT_CHRG_CTRL_CHRG_DET_N_SHIFT 2
+#define PALMAS_EXT_CHRG_CTRL_CHRG_DET_N_SHIFT 0x02
#define PALMAS_EXT_CHRG_CTRL_AUTO_ACA_EN 0x02
-#define PALMAS_EXT_CHRG_CTRL_AUTO_ACA_EN_SHIFT 1
+#define PALMAS_EXT_CHRG_CTRL_AUTO_ACA_EN_SHIFT 0x01
#define PALMAS_EXT_CHRG_CTRL_AUTO_LDOUSB_EN 0x01
-#define PALMAS_EXT_CHRG_CTRL_AUTO_LDOUSB_EN_SHIFT 0
+#define PALMAS_EXT_CHRG_CTRL_AUTO_LDOUSB_EN_SHIFT 0x00
/* Bit definitions for PMU_SECONDARY_INT2 */
#define PALMAS_PMU_SECONDARY_INT2_DVFS2_INT_SRC 0x20
-#define PALMAS_PMU_SECONDARY_INT2_DVFS2_INT_SRC_SHIFT 5
+#define PALMAS_PMU_SECONDARY_INT2_DVFS2_INT_SRC_SHIFT 0x05
#define PALMAS_PMU_SECONDARY_INT2_DVFS1_INT_SRC 0x10
-#define PALMAS_PMU_SECONDARY_INT2_DVFS1_INT_SRC_SHIFT 4
+#define PALMAS_PMU_SECONDARY_INT2_DVFS1_INT_SRC_SHIFT 0x04
#define PALMAS_PMU_SECONDARY_INT2_DVFS2_MASK 0x02
-#define PALMAS_PMU_SECONDARY_INT2_DVFS2_MASK_SHIFT 1
+#define PALMAS_PMU_SECONDARY_INT2_DVFS2_MASK_SHIFT 0x01
#define PALMAS_PMU_SECONDARY_INT2_DVFS1_MASK 0x01
-#define PALMAS_PMU_SECONDARY_INT2_DVFS1_MASK_SHIFT 0
+#define PALMAS_PMU_SECONDARY_INT2_DVFS1_MASK_SHIFT 0x00
/* Registers for function RESOURCE */
-#define PALMAS_CLK32KG_CTRL 0x0
-#define PALMAS_CLK32KGAUDIO_CTRL 0x1
-#define PALMAS_REGEN1_CTRL 0x2
-#define PALMAS_REGEN2_CTRL 0x3
-#define PALMAS_SYSEN1_CTRL 0x4
-#define PALMAS_SYSEN2_CTRL 0x5
-#define PALMAS_NSLEEP_RES_ASSIGN 0x6
-#define PALMAS_NSLEEP_SMPS_ASSIGN 0x7
-#define PALMAS_NSLEEP_LDO_ASSIGN1 0x8
-#define PALMAS_NSLEEP_LDO_ASSIGN2 0x9
-#define PALMAS_ENABLE1_RES_ASSIGN 0xA
-#define PALMAS_ENABLE1_SMPS_ASSIGN 0xB
-#define PALMAS_ENABLE1_LDO_ASSIGN1 0xC
-#define PALMAS_ENABLE1_LDO_ASSIGN2 0xD
-#define PALMAS_ENABLE2_RES_ASSIGN 0xE
-#define PALMAS_ENABLE2_SMPS_ASSIGN 0xF
+#define PALMAS_CLK32KG_CTRL 0x00
+#define PALMAS_CLK32KGAUDIO_CTRL 0x01
+#define PALMAS_REGEN1_CTRL 0x02
+#define PALMAS_REGEN2_CTRL 0x03
+#define PALMAS_SYSEN1_CTRL 0x04
+#define PALMAS_SYSEN2_CTRL 0x05
+#define PALMAS_NSLEEP_RES_ASSIGN 0x06
+#define PALMAS_NSLEEP_SMPS_ASSIGN 0x07
+#define PALMAS_NSLEEP_LDO_ASSIGN1 0x08
+#define PALMAS_NSLEEP_LDO_ASSIGN2 0x09
+#define PALMAS_ENABLE1_RES_ASSIGN 0x0A
+#define PALMAS_ENABLE1_SMPS_ASSIGN 0x0B
+#define PALMAS_ENABLE1_LDO_ASSIGN1 0x0C
+#define PALMAS_ENABLE1_LDO_ASSIGN2 0x0D
+#define PALMAS_ENABLE2_RES_ASSIGN 0x0E
+#define PALMAS_ENABLE2_SMPS_ASSIGN 0x0F
#define PALMAS_ENABLE2_LDO_ASSIGN1 0x10
#define PALMAS_ENABLE2_LDO_ASSIGN2 0x11
#define PALMAS_REGEN3_CTRL 0x12
/* Bit definitions for CLK32KG_CTRL */
#define PALMAS_CLK32KG_CTRL_STATUS 0x10
-#define PALMAS_CLK32KG_CTRL_STATUS_SHIFT 4
+#define PALMAS_CLK32KG_CTRL_STATUS_SHIFT 0x04
#define PALMAS_CLK32KG_CTRL_MODE_SLEEP 0x04
-#define PALMAS_CLK32KG_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_CLK32KG_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_CLK32KG_CTRL_MODE_ACTIVE 0x01
-#define PALMAS_CLK32KG_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_CLK32KG_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for CLK32KGAUDIO_CTRL */
#define PALMAS_CLK32KGAUDIO_CTRL_STATUS 0x10
-#define PALMAS_CLK32KGAUDIO_CTRL_STATUS_SHIFT 4
+#define PALMAS_CLK32KGAUDIO_CTRL_STATUS_SHIFT 0x04
#define PALMAS_CLK32KGAUDIO_CTRL_RESERVED3 0x08
-#define PALMAS_CLK32KGAUDIO_CTRL_RESERVED3_SHIFT 3
+#define PALMAS_CLK32KGAUDIO_CTRL_RESERVED3_SHIFT 0x03
#define PALMAS_CLK32KGAUDIO_CTRL_MODE_SLEEP 0x04
-#define PALMAS_CLK32KGAUDIO_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_CLK32KGAUDIO_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_CLK32KGAUDIO_CTRL_MODE_ACTIVE 0x01
-#define PALMAS_CLK32KGAUDIO_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_CLK32KGAUDIO_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for REGEN1_CTRL */
#define PALMAS_REGEN1_CTRL_STATUS 0x10
-#define PALMAS_REGEN1_CTRL_STATUS_SHIFT 4
+#define PALMAS_REGEN1_CTRL_STATUS_SHIFT 0x04
#define PALMAS_REGEN1_CTRL_MODE_SLEEP 0x04
-#define PALMAS_REGEN1_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_REGEN1_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_REGEN1_CTRL_MODE_ACTIVE 0x01
-#define PALMAS_REGEN1_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_REGEN1_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for REGEN2_CTRL */
#define PALMAS_REGEN2_CTRL_STATUS 0x10
-#define PALMAS_REGEN2_CTRL_STATUS_SHIFT 4
+#define PALMAS_REGEN2_CTRL_STATUS_SHIFT 0x04
#define PALMAS_REGEN2_CTRL_MODE_SLEEP 0x04
-#define PALMAS_REGEN2_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_REGEN2_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_REGEN2_CTRL_MODE_ACTIVE 0x01
-#define PALMAS_REGEN2_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_REGEN2_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for SYSEN1_CTRL */
#define PALMAS_SYSEN1_CTRL_STATUS 0x10
-#define PALMAS_SYSEN1_CTRL_STATUS_SHIFT 4
+#define PALMAS_SYSEN1_CTRL_STATUS_SHIFT 0x04
#define PALMAS_SYSEN1_CTRL_MODE_SLEEP 0x04
-#define PALMAS_SYSEN1_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_SYSEN1_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_SYSEN1_CTRL_MODE_ACTIVE 0x01
-#define PALMAS_SYSEN1_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_SYSEN1_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for SYSEN2_CTRL */
#define PALMAS_SYSEN2_CTRL_STATUS 0x10
-#define PALMAS_SYSEN2_CTRL_STATUS_SHIFT 4
+#define PALMAS_SYSEN2_CTRL_STATUS_SHIFT 0x04
#define PALMAS_SYSEN2_CTRL_MODE_SLEEP 0x04
-#define PALMAS_SYSEN2_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_SYSEN2_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_SYSEN2_CTRL_MODE_ACTIVE 0x01
-#define PALMAS_SYSEN2_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_SYSEN2_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Bit definitions for NSLEEP_RES_ASSIGN */
#define PALMAS_NSLEEP_RES_ASSIGN_REGEN3 0x40
-#define PALMAS_NSLEEP_RES_ASSIGN_REGEN3_SHIFT 6
+#define PALMAS_NSLEEP_RES_ASSIGN_REGEN3_SHIFT 0x06
#define PALMAS_NSLEEP_RES_ASSIGN_CLK32KGAUDIO 0x20
-#define PALMAS_NSLEEP_RES_ASSIGN_CLK32KGAUDIO_SHIFT 5
+#define PALMAS_NSLEEP_RES_ASSIGN_CLK32KGAUDIO_SHIFT 0x05
#define PALMAS_NSLEEP_RES_ASSIGN_CLK32KG 0x10
-#define PALMAS_NSLEEP_RES_ASSIGN_CLK32KG_SHIFT 4
+#define PALMAS_NSLEEP_RES_ASSIGN_CLK32KG_SHIFT 0x04
#define PALMAS_NSLEEP_RES_ASSIGN_SYSEN2 0x08
-#define PALMAS_NSLEEP_RES_ASSIGN_SYSEN2_SHIFT 3
+#define PALMAS_NSLEEP_RES_ASSIGN_SYSEN2_SHIFT 0x03
#define PALMAS_NSLEEP_RES_ASSIGN_SYSEN1 0x04
-#define PALMAS_NSLEEP_RES_ASSIGN_SYSEN1_SHIFT 2
+#define PALMAS_NSLEEP_RES_ASSIGN_SYSEN1_SHIFT 0x02
#define PALMAS_NSLEEP_RES_ASSIGN_REGEN2 0x02
-#define PALMAS_NSLEEP_RES_ASSIGN_REGEN2_SHIFT 1
+#define PALMAS_NSLEEP_RES_ASSIGN_REGEN2_SHIFT 0x01
#define PALMAS_NSLEEP_RES_ASSIGN_REGEN1 0x01
-#define PALMAS_NSLEEP_RES_ASSIGN_REGEN1_SHIFT 0
+#define PALMAS_NSLEEP_RES_ASSIGN_REGEN1_SHIFT 0x00
/* Bit definitions for NSLEEP_SMPS_ASSIGN */
#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS10 0x80
-#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS10_SHIFT 7
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS10_SHIFT 0x07
#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS9 0x40
-#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS9_SHIFT 6
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS9_SHIFT 0x06
#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS8 0x20
-#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS8_SHIFT 5
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS8_SHIFT 0x05
#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS7 0x10
-#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS7_SHIFT 4
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS7_SHIFT 0x04
#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS6 0x08
-#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS6_SHIFT 3
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS6_SHIFT 0x03
#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS45 0x04
-#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS45_SHIFT 2
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS45_SHIFT 0x02
#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS3 0x02
-#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS3_SHIFT 1
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS3_SHIFT 0x01
#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS12 0x01
-#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS12_SHIFT 0
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS12_SHIFT 0x00
/* Bit definitions for NSLEEP_LDO_ASSIGN1 */
#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO8 0x80
-#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO8_SHIFT 7
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO8_SHIFT 0x07
#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO7 0x40
-#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO7_SHIFT 6
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO7_SHIFT 0x06
#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO6 0x20
-#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO6_SHIFT 5
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO6_SHIFT 0x05
#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO5 0x10
-#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO5_SHIFT 4
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO5_SHIFT 0x04
#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO4 0x08
-#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO4_SHIFT 3
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO4_SHIFT 0x03
#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO3 0x04
-#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO3_SHIFT 2
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO3_SHIFT 0x02
#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO2 0x02
-#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO2_SHIFT 1
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO2_SHIFT 0x01
#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO1 0x01
-#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO1_SHIFT 0
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO1_SHIFT 0x00
/* Bit definitions for NSLEEP_LDO_ASSIGN2 */
#define PALMAS_NSLEEP_LDO_ASSIGN2_LDOUSB 0x04
-#define PALMAS_NSLEEP_LDO_ASSIGN2_LDOUSB_SHIFT 2
+#define PALMAS_NSLEEP_LDO_ASSIGN2_LDOUSB_SHIFT 0x02
#define PALMAS_NSLEEP_LDO_ASSIGN2_LDOLN 0x02
-#define PALMAS_NSLEEP_LDO_ASSIGN2_LDOLN_SHIFT 1
+#define PALMAS_NSLEEP_LDO_ASSIGN2_LDOLN_SHIFT 0x01
#define PALMAS_NSLEEP_LDO_ASSIGN2_LDO9 0x01
-#define PALMAS_NSLEEP_LDO_ASSIGN2_LDO9_SHIFT 0
+#define PALMAS_NSLEEP_LDO_ASSIGN2_LDO9_SHIFT 0x00
/* Bit definitions for ENABLE1_RES_ASSIGN */
#define PALMAS_ENABLE1_RES_ASSIGN_REGEN3 0x40
-#define PALMAS_ENABLE1_RES_ASSIGN_REGEN3_SHIFT 6
+#define PALMAS_ENABLE1_RES_ASSIGN_REGEN3_SHIFT 0x06
#define PALMAS_ENABLE1_RES_ASSIGN_CLK32KGAUDIO 0x20
-#define PALMAS_ENABLE1_RES_ASSIGN_CLK32KGAUDIO_SHIFT 5
+#define PALMAS_ENABLE1_RES_ASSIGN_CLK32KGAUDIO_SHIFT 0x05
#define PALMAS_ENABLE1_RES_ASSIGN_CLK32KG 0x10
-#define PALMAS_ENABLE1_RES_ASSIGN_CLK32KG_SHIFT 4
+#define PALMAS_ENABLE1_RES_ASSIGN_CLK32KG_SHIFT 0x04
#define PALMAS_ENABLE1_RES_ASSIGN_SYSEN2 0x08
-#define PALMAS_ENABLE1_RES_ASSIGN_SYSEN2_SHIFT 3
+#define PALMAS_ENABLE1_RES_ASSIGN_SYSEN2_SHIFT 0x03
#define PALMAS_ENABLE1_RES_ASSIGN_SYSEN1 0x04
-#define PALMAS_ENABLE1_RES_ASSIGN_SYSEN1_SHIFT 2
+#define PALMAS_ENABLE1_RES_ASSIGN_SYSEN1_SHIFT 0x02
#define PALMAS_ENABLE1_RES_ASSIGN_REGEN2 0x02
-#define PALMAS_ENABLE1_RES_ASSIGN_REGEN2_SHIFT 1
+#define PALMAS_ENABLE1_RES_ASSIGN_REGEN2_SHIFT 0x01
#define PALMAS_ENABLE1_RES_ASSIGN_REGEN1 0x01
-#define PALMAS_ENABLE1_RES_ASSIGN_REGEN1_SHIFT 0
+#define PALMAS_ENABLE1_RES_ASSIGN_REGEN1_SHIFT 0x00
/* Bit definitions for ENABLE1_SMPS_ASSIGN */
#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS10 0x80
-#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS10_SHIFT 7
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS10_SHIFT 0x07
#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS9 0x40
-#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS9_SHIFT 6
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS9_SHIFT 0x06
#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS8 0x20
-#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS8_SHIFT 5
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS8_SHIFT 0x05
#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS7 0x10
-#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS7_SHIFT 4
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS7_SHIFT 0x04
#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS6 0x08
-#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS6_SHIFT 3
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS6_SHIFT 0x03
#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS45 0x04
-#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS45_SHIFT 2
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS45_SHIFT 0x02
#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS3 0x02
-#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS3_SHIFT 1
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS3_SHIFT 0x01
#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS12 0x01
-#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS12_SHIFT 0
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS12_SHIFT 0x00
/* Bit definitions for ENABLE1_LDO_ASSIGN1 */
#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO8 0x80
-#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO8_SHIFT 7
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO8_SHIFT 0x07
#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO7 0x40
-#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO7_SHIFT 6
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO7_SHIFT 0x06
#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO6 0x20
-#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO6_SHIFT 5
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO6_SHIFT 0x05
#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO5 0x10
-#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO5_SHIFT 4
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO5_SHIFT 0x04
#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO4 0x08
-#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO4_SHIFT 3
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO4_SHIFT 0x03
#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO3 0x04
-#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO3_SHIFT 2
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO3_SHIFT 0x02
#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO2 0x02
-#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO2_SHIFT 1
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO2_SHIFT 0x01
#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO1 0x01
-#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO1_SHIFT 0
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO1_SHIFT 0x00
/* Bit definitions for ENABLE1_LDO_ASSIGN2 */
#define PALMAS_ENABLE1_LDO_ASSIGN2_LDOUSB 0x04
-#define PALMAS_ENABLE1_LDO_ASSIGN2_LDOUSB_SHIFT 2
+#define PALMAS_ENABLE1_LDO_ASSIGN2_LDOUSB_SHIFT 0x02
#define PALMAS_ENABLE1_LDO_ASSIGN2_LDOLN 0x02
-#define PALMAS_ENABLE1_LDO_ASSIGN2_LDOLN_SHIFT 1
+#define PALMAS_ENABLE1_LDO_ASSIGN2_LDOLN_SHIFT 0x01
#define PALMAS_ENABLE1_LDO_ASSIGN2_LDO9 0x01
-#define PALMAS_ENABLE1_LDO_ASSIGN2_LDO9_SHIFT 0
+#define PALMAS_ENABLE1_LDO_ASSIGN2_LDO9_SHIFT 0x00
/* Bit definitions for ENABLE2_RES_ASSIGN */
#define PALMAS_ENABLE2_RES_ASSIGN_REGEN3 0x40
-#define PALMAS_ENABLE2_RES_ASSIGN_REGEN3_SHIFT 6
+#define PALMAS_ENABLE2_RES_ASSIGN_REGEN3_SHIFT 0x06
#define PALMAS_ENABLE2_RES_ASSIGN_CLK32KGAUDIO 0x20
-#define PALMAS_ENABLE2_RES_ASSIGN_CLK32KGAUDIO_SHIFT 5
+#define PALMAS_ENABLE2_RES_ASSIGN_CLK32KGAUDIO_SHIFT 0x05
#define PALMAS_ENABLE2_RES_ASSIGN_CLK32KG 0x10
-#define PALMAS_ENABLE2_RES_ASSIGN_CLK32KG_SHIFT 4
+#define PALMAS_ENABLE2_RES_ASSIGN_CLK32KG_SHIFT 0x04
#define PALMAS_ENABLE2_RES_ASSIGN_SYSEN2 0x08
-#define PALMAS_ENABLE2_RES_ASSIGN_SYSEN2_SHIFT 3
+#define PALMAS_ENABLE2_RES_ASSIGN_SYSEN2_SHIFT 0x03
#define PALMAS_ENABLE2_RES_ASSIGN_SYSEN1 0x04
-#define PALMAS_ENABLE2_RES_ASSIGN_SYSEN1_SHIFT 2
+#define PALMAS_ENABLE2_RES_ASSIGN_SYSEN1_SHIFT 0x02
#define PALMAS_ENABLE2_RES_ASSIGN_REGEN2 0x02
-#define PALMAS_ENABLE2_RES_ASSIGN_REGEN2_SHIFT 1
+#define PALMAS_ENABLE2_RES_ASSIGN_REGEN2_SHIFT 0x01
#define PALMAS_ENABLE2_RES_ASSIGN_REGEN1 0x01
-#define PALMAS_ENABLE2_RES_ASSIGN_REGEN1_SHIFT 0
+#define PALMAS_ENABLE2_RES_ASSIGN_REGEN1_SHIFT 0x00
/* Bit definitions for ENABLE2_SMPS_ASSIGN */
#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS10 0x80
-#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS10_SHIFT 7
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS10_SHIFT 0x07
#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS9 0x40
-#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS9_SHIFT 6
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS9_SHIFT 0x06
#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS8 0x20
-#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS8_SHIFT 5
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS8_SHIFT 0x05
#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS7 0x10
-#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS7_SHIFT 4
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS7_SHIFT 0x04
#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS6 0x08
-#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS6_SHIFT 3
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS6_SHIFT 0x03
#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS45 0x04
-#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS45_SHIFT 2
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS45_SHIFT 0x02
#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS3 0x02
-#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS3_SHIFT 1
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS3_SHIFT 0x01
#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS12 0x01
-#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS12_SHIFT 0
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS12_SHIFT 0x00
/* Bit definitions for ENABLE2_LDO_ASSIGN1 */
#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO8 0x80
-#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO8_SHIFT 7
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO8_SHIFT 0x07
#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO7 0x40
-#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO7_SHIFT 6
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO7_SHIFT 0x06
#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO6 0x20
-#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO6_SHIFT 5
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO6_SHIFT 0x05
#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO5 0x10
-#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO5_SHIFT 4
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO5_SHIFT 0x04
#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO4 0x08
-#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO4_SHIFT 3
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO4_SHIFT 0x03
#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO3 0x04
-#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO3_SHIFT 2
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO3_SHIFT 0x02
#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO2 0x02
-#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO2_SHIFT 1
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO2_SHIFT 0x01
#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO1 0x01
-#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO1_SHIFT 0
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO1_SHIFT 0x00
/* Bit definitions for ENABLE2_LDO_ASSIGN2 */
#define PALMAS_ENABLE2_LDO_ASSIGN2_LDOUSB 0x04
-#define PALMAS_ENABLE2_LDO_ASSIGN2_LDOUSB_SHIFT 2
+#define PALMAS_ENABLE2_LDO_ASSIGN2_LDOUSB_SHIFT 0x02
#define PALMAS_ENABLE2_LDO_ASSIGN2_LDOLN 0x02
-#define PALMAS_ENABLE2_LDO_ASSIGN2_LDOLN_SHIFT 1
+#define PALMAS_ENABLE2_LDO_ASSIGN2_LDOLN_SHIFT 0x01
#define PALMAS_ENABLE2_LDO_ASSIGN2_LDO9 0x01
-#define PALMAS_ENABLE2_LDO_ASSIGN2_LDO9_SHIFT 0
+#define PALMAS_ENABLE2_LDO_ASSIGN2_LDO9_SHIFT 0x00
/* Bit definitions for REGEN3_CTRL */
#define PALMAS_REGEN3_CTRL_STATUS 0x10
-#define PALMAS_REGEN3_CTRL_STATUS_SHIFT 4
+#define PALMAS_REGEN3_CTRL_STATUS_SHIFT 0x04
#define PALMAS_REGEN3_CTRL_MODE_SLEEP 0x04
-#define PALMAS_REGEN3_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_REGEN3_CTRL_MODE_SLEEP_SHIFT 0x02
#define PALMAS_REGEN3_CTRL_MODE_ACTIVE 0x01
-#define PALMAS_REGEN3_CTRL_MODE_ACTIVE_SHIFT 0
+#define PALMAS_REGEN3_CTRL_MODE_ACTIVE_SHIFT 0x00
/* Registers for function PAD_CONTROL */
-#define PALMAS_OD_OUTPUT_CTRL2 0x2
-#define PALMAS_POLARITY_CTRL2 0x3
-#define PALMAS_PU_PD_INPUT_CTRL1 0x4
-#define PALMAS_PU_PD_INPUT_CTRL2 0x5
-#define PALMAS_PU_PD_INPUT_CTRL3 0x6
-#define PALMAS_PU_PD_INPUT_CTRL5 0x7
-#define PALMAS_OD_OUTPUT_CTRL 0x8
-#define PALMAS_POLARITY_CTRL 0x9
-#define PALMAS_PRIMARY_SECONDARY_PAD1 0xA
-#define PALMAS_PRIMARY_SECONDARY_PAD2 0xB
-#define PALMAS_I2C_SPI 0xC
-#define PALMAS_PU_PD_INPUT_CTRL4 0xD
-#define PALMAS_PRIMARY_SECONDARY_PAD3 0xE
-#define PALMAS_PRIMARY_SECONDARY_PAD4 0xF
+#define PALMAS_OD_OUTPUT_CTRL2 0x02
+#define PALMAS_POLARITY_CTRL2 0x03
+#define PALMAS_PU_PD_INPUT_CTRL1 0x04
+#define PALMAS_PU_PD_INPUT_CTRL2 0x05
+#define PALMAS_PU_PD_INPUT_CTRL3 0x06
+#define PALMAS_PU_PD_INPUT_CTRL5 0x07
+#define PALMAS_OD_OUTPUT_CTRL 0x08
+#define PALMAS_POLARITY_CTRL 0x09
+#define PALMAS_PRIMARY_SECONDARY_PAD1 0x0A
+#define PALMAS_PRIMARY_SECONDARY_PAD2 0x0B
+#define PALMAS_I2C_SPI 0x0C
+#define PALMAS_PU_PD_INPUT_CTRL4 0x0D
+#define PALMAS_PRIMARY_SECONDARY_PAD3 0x0E
+#define PALMAS_PRIMARY_SECONDARY_PAD4 0x0F
/* Bit definitions for PU_PD_INPUT_CTRL1 */
#define PALMAS_PU_PD_INPUT_CTRL1_RESET_IN_PD 0x40
-#define PALMAS_PU_PD_INPUT_CTRL1_RESET_IN_PD_SHIFT 6
+#define PALMAS_PU_PD_INPUT_CTRL1_RESET_IN_PD_SHIFT 0x06
#define PALMAS_PU_PD_INPUT_CTRL1_GPADC_START_PU 0x20
-#define PALMAS_PU_PD_INPUT_CTRL1_GPADC_START_PU_SHIFT 5
+#define PALMAS_PU_PD_INPUT_CTRL1_GPADC_START_PU_SHIFT 0x05
#define PALMAS_PU_PD_INPUT_CTRL1_GPADC_START_PD 0x10
-#define PALMAS_PU_PD_INPUT_CTRL1_GPADC_START_PD_SHIFT 4
+#define PALMAS_PU_PD_INPUT_CTRL1_GPADC_START_PD_SHIFT 0x04
#define PALMAS_PU_PD_INPUT_CTRL1_PWRDOWN_PD 0x04
-#define PALMAS_PU_PD_INPUT_CTRL1_PWRDOWN_PD_SHIFT 2
+#define PALMAS_PU_PD_INPUT_CTRL1_PWRDOWN_PD_SHIFT 0x02
#define PALMAS_PU_PD_INPUT_CTRL1_NRESWARM_PU 0x02
-#define PALMAS_PU_PD_INPUT_CTRL1_NRESWARM_PU_SHIFT 1
+#define PALMAS_PU_PD_INPUT_CTRL1_NRESWARM_PU_SHIFT 0x01
/* Bit definitions for PU_PD_INPUT_CTRL2 */
#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE2_PU 0x20
-#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE2_PU_SHIFT 5
+#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE2_PU_SHIFT 0x05
#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE2_PD 0x10
-#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE2_PD_SHIFT 4
+#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE2_PD_SHIFT 0x04
#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE1_PU 0x08
-#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE1_PU_SHIFT 3
+#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE1_PU_SHIFT 0x03
#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE1_PD 0x04
-#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE1_PD_SHIFT 2
+#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE1_PD_SHIFT 0x02
#define PALMAS_PU_PD_INPUT_CTRL2_NSLEEP_PU 0x02
-#define PALMAS_PU_PD_INPUT_CTRL2_NSLEEP_PU_SHIFT 1
+#define PALMAS_PU_PD_INPUT_CTRL2_NSLEEP_PU_SHIFT 0x01
#define PALMAS_PU_PD_INPUT_CTRL2_NSLEEP_PD 0x01
-#define PALMAS_PU_PD_INPUT_CTRL2_NSLEEP_PD_SHIFT 0
+#define PALMAS_PU_PD_INPUT_CTRL2_NSLEEP_PD_SHIFT 0x00
/* Bit definitions for PU_PD_INPUT_CTRL3 */
#define PALMAS_PU_PD_INPUT_CTRL3_ACOK_PD 0x40
-#define PALMAS_PU_PD_INPUT_CTRL3_ACOK_PD_SHIFT 6
+#define PALMAS_PU_PD_INPUT_CTRL3_ACOK_PD_SHIFT 0x06
#define PALMAS_PU_PD_INPUT_CTRL3_CHRG_DET_N_PD 0x10
-#define PALMAS_PU_PD_INPUT_CTRL3_CHRG_DET_N_PD_SHIFT 4
+#define PALMAS_PU_PD_INPUT_CTRL3_CHRG_DET_N_PD_SHIFT 0x04
#define PALMAS_PU_PD_INPUT_CTRL3_POWERHOLD_PD 0x04
-#define PALMAS_PU_PD_INPUT_CTRL3_POWERHOLD_PD_SHIFT 2
+#define PALMAS_PU_PD_INPUT_CTRL3_POWERHOLD_PD_SHIFT 0x02
#define PALMAS_PU_PD_INPUT_CTRL3_MSECURE_PD 0x01
-#define PALMAS_PU_PD_INPUT_CTRL3_MSECURE_PD_SHIFT 0
+#define PALMAS_PU_PD_INPUT_CTRL3_MSECURE_PD_SHIFT 0x00
/* Bit definitions for OD_OUTPUT_CTRL */
#define PALMAS_OD_OUTPUT_CTRL_PWM_2_OD 0x80
-#define PALMAS_OD_OUTPUT_CTRL_PWM_2_OD_SHIFT 7
+#define PALMAS_OD_OUTPUT_CTRL_PWM_2_OD_SHIFT 0x07
#define PALMAS_OD_OUTPUT_CTRL_VBUSDET_OD 0x40
-#define PALMAS_OD_OUTPUT_CTRL_VBUSDET_OD_SHIFT 6
+#define PALMAS_OD_OUTPUT_CTRL_VBUSDET_OD_SHIFT 0x06
#define PALMAS_OD_OUTPUT_CTRL_PWM_1_OD 0x20
-#define PALMAS_OD_OUTPUT_CTRL_PWM_1_OD_SHIFT 5
+#define PALMAS_OD_OUTPUT_CTRL_PWM_1_OD_SHIFT 0x05
#define PALMAS_OD_OUTPUT_CTRL_INT_OD 0x08
-#define PALMAS_OD_OUTPUT_CTRL_INT_OD_SHIFT 3
+#define PALMAS_OD_OUTPUT_CTRL_INT_OD_SHIFT 0x03
/* Bit definitions for POLARITY_CTRL */
#define PALMAS_POLARITY_CTRL_INT_POLARITY 0x80
-#define PALMAS_POLARITY_CTRL_INT_POLARITY_SHIFT 7
+#define PALMAS_POLARITY_CTRL_INT_POLARITY_SHIFT 0x07
#define PALMAS_POLARITY_CTRL_ENABLE2_POLARITY 0x40
-#define PALMAS_POLARITY_CTRL_ENABLE2_POLARITY_SHIFT 6
+#define PALMAS_POLARITY_CTRL_ENABLE2_POLARITY_SHIFT 0x06
#define PALMAS_POLARITY_CTRL_ENABLE1_POLARITY 0x20
-#define PALMAS_POLARITY_CTRL_ENABLE1_POLARITY_SHIFT 5
+#define PALMAS_POLARITY_CTRL_ENABLE1_POLARITY_SHIFT 0x05
#define PALMAS_POLARITY_CTRL_NSLEEP_POLARITY 0x10
-#define PALMAS_POLARITY_CTRL_NSLEEP_POLARITY_SHIFT 4
+#define PALMAS_POLARITY_CTRL_NSLEEP_POLARITY_SHIFT 0x04
#define PALMAS_POLARITY_CTRL_RESET_IN_POLARITY 0x08
-#define PALMAS_POLARITY_CTRL_RESET_IN_POLARITY_SHIFT 3
+#define PALMAS_POLARITY_CTRL_RESET_IN_POLARITY_SHIFT 0x03
#define PALMAS_POLARITY_CTRL_GPIO_3_CHRG_DET_N_POLARITY 0x04
-#define PALMAS_POLARITY_CTRL_GPIO_3_CHRG_DET_N_POLARITY_SHIFT 2
+#define PALMAS_POLARITY_CTRL_GPIO_3_CHRG_DET_N_POLARITY_SHIFT 0x02
#define PALMAS_POLARITY_CTRL_POWERGOOD_USB_PSEL_POLARITY 0x02
-#define PALMAS_POLARITY_CTRL_POWERGOOD_USB_PSEL_POLARITY_SHIFT 1
+#define PALMAS_POLARITY_CTRL_POWERGOOD_USB_PSEL_POLARITY_SHIFT 0x01
#define PALMAS_POLARITY_CTRL_PWRDOWN_POLARITY 0x01
-#define PALMAS_POLARITY_CTRL_PWRDOWN_POLARITY_SHIFT 0
+#define PALMAS_POLARITY_CTRL_PWRDOWN_POLARITY_SHIFT 0x00
/* Bit definitions for PRIMARY_SECONDARY_PAD1 */
#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_3 0x80
-#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_3_SHIFT 7
+#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_3_SHIFT 0x07
#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_2_MASK 0x60
-#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_2_SHIFT 5
+#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_2_SHIFT 0x05
#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_1_MASK 0x18
-#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_1_SHIFT 3
+#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_1_SHIFT 0x03
#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_0 0x04
-#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_0_SHIFT 2
+#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_0_SHIFT 0x02
#define PALMAS_PRIMARY_SECONDARY_PAD1_VAC 0x02
-#define PALMAS_PRIMARY_SECONDARY_PAD1_VAC_SHIFT 1
+#define PALMAS_PRIMARY_SECONDARY_PAD1_VAC_SHIFT 0x01
#define PALMAS_PRIMARY_SECONDARY_PAD1_POWERGOOD 0x01
-#define PALMAS_PRIMARY_SECONDARY_PAD1_POWERGOOD_SHIFT 0
+#define PALMAS_PRIMARY_SECONDARY_PAD1_POWERGOOD_SHIFT 0x00
/* Bit definitions for PRIMARY_SECONDARY_PAD2 */
#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_7_MASK 0x30
-#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_7_SHIFT 4
+#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_7_SHIFT 0x04
#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_6 0x08
-#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_6_SHIFT 3
+#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_6_SHIFT 0x03
#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_5_MASK 0x06
-#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_5_SHIFT 1
+#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_5_SHIFT 0x01
#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_4 0x01
-#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_4_SHIFT 0
+#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_4_SHIFT 0x00
/* Bit definitions for I2C_SPI */
#define PALMAS_I2C_SPI_I2C2OTP_EN 0x80
-#define PALMAS_I2C_SPI_I2C2OTP_EN_SHIFT 7
+#define PALMAS_I2C_SPI_I2C2OTP_EN_SHIFT 0x07
#define PALMAS_I2C_SPI_I2C2OTP_PAGESEL 0x40
-#define PALMAS_I2C_SPI_I2C2OTP_PAGESEL_SHIFT 6
+#define PALMAS_I2C_SPI_I2C2OTP_PAGESEL_SHIFT 0x06
#define PALMAS_I2C_SPI_ID_I2C2 0x20
-#define PALMAS_I2C_SPI_ID_I2C2_SHIFT 5
+#define PALMAS_I2C_SPI_ID_I2C2_SHIFT 0x05
#define PALMAS_I2C_SPI_I2C_SPI 0x10
-#define PALMAS_I2C_SPI_I2C_SPI_SHIFT 4
-#define PALMAS_I2C_SPI_ID_I2C1_MASK 0x0f
-#define PALMAS_I2C_SPI_ID_I2C1_SHIFT 0
+#define PALMAS_I2C_SPI_I2C_SPI_SHIFT 0x04
+#define PALMAS_I2C_SPI_ID_I2C1_MASK 0x0F
+#define PALMAS_I2C_SPI_ID_I2C1_SHIFT 0x00
/* Bit definitions for PU_PD_INPUT_CTRL4 */
#define PALMAS_PU_PD_INPUT_CTRL4_DVFS2_DAT_PD 0x40
-#define PALMAS_PU_PD_INPUT_CTRL4_DVFS2_DAT_PD_SHIFT 6
+#define PALMAS_PU_PD_INPUT_CTRL4_DVFS2_DAT_PD_SHIFT 0x06
#define PALMAS_PU_PD_INPUT_CTRL4_DVFS2_CLK_PD 0x10
-#define PALMAS_PU_PD_INPUT_CTRL4_DVFS2_CLK_PD_SHIFT 4
+#define PALMAS_PU_PD_INPUT_CTRL4_DVFS2_CLK_PD_SHIFT 0x04
#define PALMAS_PU_PD_INPUT_CTRL4_DVFS1_DAT_PD 0x04
-#define PALMAS_PU_PD_INPUT_CTRL4_DVFS1_DAT_PD_SHIFT 2
+#define PALMAS_PU_PD_INPUT_CTRL4_DVFS1_DAT_PD_SHIFT 0x02
#define PALMAS_PU_PD_INPUT_CTRL4_DVFS1_CLK_PD 0x01
-#define PALMAS_PU_PD_INPUT_CTRL4_DVFS1_CLK_PD_SHIFT 0
+#define PALMAS_PU_PD_INPUT_CTRL4_DVFS1_CLK_PD_SHIFT 0x00
/* Bit definitions for PRIMARY_SECONDARY_PAD3 */
#define PALMAS_PRIMARY_SECONDARY_PAD3_DVFS2 0x02
-#define PALMAS_PRIMARY_SECONDARY_PAD3_DVFS2_SHIFT 1
+#define PALMAS_PRIMARY_SECONDARY_PAD3_DVFS2_SHIFT 0x01
#define PALMAS_PRIMARY_SECONDARY_PAD3_DVFS1 0x01
-#define PALMAS_PRIMARY_SECONDARY_PAD3_DVFS1_SHIFT 0
+#define PALMAS_PRIMARY_SECONDARY_PAD3_DVFS1_SHIFT 0x00
/* Registers for function LED_PWM */
-#define PALMAS_LED_PERIOD_CTRL 0x0
-#define PALMAS_LED_CTRL 0x1
-#define PALMAS_PWM_CTRL1 0x2
-#define PALMAS_PWM_CTRL2 0x3
+#define PALMAS_LED_PERIOD_CTRL 0x00
+#define PALMAS_LED_CTRL 0x01
+#define PALMAS_PWM_CTRL1 0x02
+#define PALMAS_PWM_CTRL2 0x03
/* Bit definitions for LED_PERIOD_CTRL */
#define PALMAS_LED_PERIOD_CTRL_LED_2_PERIOD_MASK 0x38
-#define PALMAS_LED_PERIOD_CTRL_LED_2_PERIOD_SHIFT 3
+#define PALMAS_LED_PERIOD_CTRL_LED_2_PERIOD_SHIFT 0x03
#define PALMAS_LED_PERIOD_CTRL_LED_1_PERIOD_MASK 0x07
-#define PALMAS_LED_PERIOD_CTRL_LED_1_PERIOD_SHIFT 0
+#define PALMAS_LED_PERIOD_CTRL_LED_1_PERIOD_SHIFT 0x00
/* Bit definitions for LED_CTRL */
#define PALMAS_LED_CTRL_LED_2_SEQ 0x20
-#define PALMAS_LED_CTRL_LED_2_SEQ_SHIFT 5
+#define PALMAS_LED_CTRL_LED_2_SEQ_SHIFT 0x05
#define PALMAS_LED_CTRL_LED_1_SEQ 0x10
-#define PALMAS_LED_CTRL_LED_1_SEQ_SHIFT 4
+#define PALMAS_LED_CTRL_LED_1_SEQ_SHIFT 0x04
#define PALMAS_LED_CTRL_LED_2_ON_TIME_MASK 0x0c
-#define PALMAS_LED_CTRL_LED_2_ON_TIME_SHIFT 2
+#define PALMAS_LED_CTRL_LED_2_ON_TIME_SHIFT 0x02
#define PALMAS_LED_CTRL_LED_1_ON_TIME_MASK 0x03
-#define PALMAS_LED_CTRL_LED_1_ON_TIME_SHIFT 0
+#define PALMAS_LED_CTRL_LED_1_ON_TIME_SHIFT 0x00
/* Bit definitions for PWM_CTRL1 */
#define PALMAS_PWM_CTRL1_PWM_FREQ_EN 0x02
-#define PALMAS_PWM_CTRL1_PWM_FREQ_EN_SHIFT 1
+#define PALMAS_PWM_CTRL1_PWM_FREQ_EN_SHIFT 0x01
#define PALMAS_PWM_CTRL1_PWM_FREQ_SEL 0x01
-#define PALMAS_PWM_CTRL1_PWM_FREQ_SEL_SHIFT 0
+#define PALMAS_PWM_CTRL1_PWM_FREQ_SEL_SHIFT 0x00
/* Bit definitions for PWM_CTRL2 */
-#define PALMAS_PWM_CTRL2_PWM_DUTY_SEL_MASK 0xff
-#define PALMAS_PWM_CTRL2_PWM_DUTY_SEL_SHIFT 0
+#define PALMAS_PWM_CTRL2_PWM_DUTY_SEL_MASK 0xFF
+#define PALMAS_PWM_CTRL2_PWM_DUTY_SEL_SHIFT 0x00
/* Registers for function INTERRUPT */
-#define PALMAS_INT1_STATUS 0x0
-#define PALMAS_INT1_MASK 0x1
-#define PALMAS_INT1_LINE_STATE 0x2
-#define PALMAS_INT1_EDGE_DETECT1_RESERVED 0x3
-#define PALMAS_INT1_EDGE_DETECT2_RESERVED 0x4
-#define PALMAS_INT2_STATUS 0x5
-#define PALMAS_INT2_MASK 0x6
-#define PALMAS_INT2_LINE_STATE 0x7
-#define PALMAS_INT2_EDGE_DETECT1_RESERVED 0x8
-#define PALMAS_INT2_EDGE_DETECT2_RESERVED 0x9
-#define PALMAS_INT3_STATUS 0xA
-#define PALMAS_INT3_MASK 0xB
-#define PALMAS_INT3_LINE_STATE 0xC
-#define PALMAS_INT3_EDGE_DETECT1_RESERVED 0xD
-#define PALMAS_INT3_EDGE_DETECT2_RESERVED 0xE
-#define PALMAS_INT4_STATUS 0xF
+#define PALMAS_INT1_STATUS 0x00
+#define PALMAS_INT1_MASK 0x01
+#define PALMAS_INT1_LINE_STATE 0x02
+#define PALMAS_INT1_EDGE_DETECT1_RESERVED 0x03
+#define PALMAS_INT1_EDGE_DETECT2_RESERVED 0x04
+#define PALMAS_INT2_STATUS 0x05
+#define PALMAS_INT2_MASK 0x06
+#define PALMAS_INT2_LINE_STATE 0x07
+#define PALMAS_INT2_EDGE_DETECT1_RESERVED 0x08
+#define PALMAS_INT2_EDGE_DETECT2_RESERVED 0x09
+#define PALMAS_INT3_STATUS 0x0A
+#define PALMAS_INT3_MASK 0x0B
+#define PALMAS_INT3_LINE_STATE 0x0C
+#define PALMAS_INT3_EDGE_DETECT1_RESERVED 0x0D
+#define PALMAS_INT3_EDGE_DETECT2_RESERVED 0x0E
+#define PALMAS_INT4_STATUS 0x0F
#define PALMAS_INT4_MASK 0x10
#define PALMAS_INT4_LINE_STATE 0x11
#define PALMAS_INT4_EDGE_DETECT1 0x12
@@ -1966,276 +1966,276 @@ enum usb_irq_events {
/* Bit definitions for INT1_STATUS */
#define PALMAS_INT1_STATUS_VBAT_MON 0x80
-#define PALMAS_INT1_STATUS_VBAT_MON_SHIFT 7
+#define PALMAS_INT1_STATUS_VBAT_MON_SHIFT 0x07
#define PALMAS_INT1_STATUS_VSYS_MON 0x40
-#define PALMAS_INT1_STATUS_VSYS_MON_SHIFT 6
+#define PALMAS_INT1_STATUS_VSYS_MON_SHIFT 0x06
#define PALMAS_INT1_STATUS_HOTDIE 0x20
-#define PALMAS_INT1_STATUS_HOTDIE_SHIFT 5
+#define PALMAS_INT1_STATUS_HOTDIE_SHIFT 0x05
#define PALMAS_INT1_STATUS_PWRDOWN 0x10
-#define PALMAS_INT1_STATUS_PWRDOWN_SHIFT 4
+#define PALMAS_INT1_STATUS_PWRDOWN_SHIFT 0x04
#define PALMAS_INT1_STATUS_RPWRON 0x08
-#define PALMAS_INT1_STATUS_RPWRON_SHIFT 3
+#define PALMAS_INT1_STATUS_RPWRON_SHIFT 0x03
#define PALMAS_INT1_STATUS_LONG_PRESS_KEY 0x04
-#define PALMAS_INT1_STATUS_LONG_PRESS_KEY_SHIFT 2
+#define PALMAS_INT1_STATUS_LONG_PRESS_KEY_SHIFT 0x02
#define PALMAS_INT1_STATUS_PWRON 0x02
-#define PALMAS_INT1_STATUS_PWRON_SHIFT 1
+#define PALMAS_INT1_STATUS_PWRON_SHIFT 0x01
#define PALMAS_INT1_STATUS_CHARG_DET_N_VBUS_OVV 0x01
-#define PALMAS_INT1_STATUS_CHARG_DET_N_VBUS_OVV_SHIFT 0
+#define PALMAS_INT1_STATUS_CHARG_DET_N_VBUS_OVV_SHIFT 0x00
/* Bit definitions for INT1_MASK */
#define PALMAS_INT1_MASK_VBAT_MON 0x80
-#define PALMAS_INT1_MASK_VBAT_MON_SHIFT 7
+#define PALMAS_INT1_MASK_VBAT_MON_SHIFT 0x07
#define PALMAS_INT1_MASK_VSYS_MON 0x40
-#define PALMAS_INT1_MASK_VSYS_MON_SHIFT 6
+#define PALMAS_INT1_MASK_VSYS_MON_SHIFT 0x06
#define PALMAS_INT1_MASK_HOTDIE 0x20
-#define PALMAS_INT1_MASK_HOTDIE_SHIFT 5
+#define PALMAS_INT1_MASK_HOTDIE_SHIFT 0x05
#define PALMAS_INT1_MASK_PWRDOWN 0x10
-#define PALMAS_INT1_MASK_PWRDOWN_SHIFT 4
+#define PALMAS_INT1_MASK_PWRDOWN_SHIFT 0x04
#define PALMAS_INT1_MASK_RPWRON 0x08
-#define PALMAS_INT1_MASK_RPWRON_SHIFT 3
+#define PALMAS_INT1_MASK_RPWRON_SHIFT 0x03
#define PALMAS_INT1_MASK_LONG_PRESS_KEY 0x04
-#define PALMAS_INT1_MASK_LONG_PRESS_KEY_SHIFT 2
+#define PALMAS_INT1_MASK_LONG_PRESS_KEY_SHIFT 0x02
#define PALMAS_INT1_MASK_PWRON 0x02
-#define PALMAS_INT1_MASK_PWRON_SHIFT 1
+#define PALMAS_INT1_MASK_PWRON_SHIFT 0x01
#define PALMAS_INT1_MASK_CHARG_DET_N_VBUS_OVV 0x01
-#define PALMAS_INT1_MASK_CHARG_DET_N_VBUS_OVV_SHIFT 0
+#define PALMAS_INT1_MASK_CHARG_DET_N_VBUS_OVV_SHIFT 0x00
/* Bit definitions for INT1_LINE_STATE */
#define PALMAS_INT1_LINE_STATE_VBAT_MON 0x80
-#define PALMAS_INT1_LINE_STATE_VBAT_MON_SHIFT 7
+#define PALMAS_INT1_LINE_STATE_VBAT_MON_SHIFT 0x07
#define PALMAS_INT1_LINE_STATE_VSYS_MON 0x40
-#define PALMAS_INT1_LINE_STATE_VSYS_MON_SHIFT 6
+#define PALMAS_INT1_LINE_STATE_VSYS_MON_SHIFT 0x06
#define PALMAS_INT1_LINE_STATE_HOTDIE 0x20
-#define PALMAS_INT1_LINE_STATE_HOTDIE_SHIFT 5
+#define PALMAS_INT1_LINE_STATE_HOTDIE_SHIFT 0x05
#define PALMAS_INT1_LINE_STATE_PWRDOWN 0x10
-#define PALMAS_INT1_LINE_STATE_PWRDOWN_SHIFT 4
+#define PALMAS_INT1_LINE_STATE_PWRDOWN_SHIFT 0x04
#define PALMAS_INT1_LINE_STATE_RPWRON 0x08
-#define PALMAS_INT1_LINE_STATE_RPWRON_SHIFT 3
+#define PALMAS_INT1_LINE_STATE_RPWRON_SHIFT 0x03
#define PALMAS_INT1_LINE_STATE_LONG_PRESS_KEY 0x04
-#define PALMAS_INT1_LINE_STATE_LONG_PRESS_KEY_SHIFT 2
+#define PALMAS_INT1_LINE_STATE_LONG_PRESS_KEY_SHIFT 0x02
#define PALMAS_INT1_LINE_STATE_PWRON 0x02
-#define PALMAS_INT1_LINE_STATE_PWRON_SHIFT 1
+#define PALMAS_INT1_LINE_STATE_PWRON_SHIFT 0x01
#define PALMAS_INT1_LINE_STATE_CHARG_DET_N_VBUS_OVV 0x01
-#define PALMAS_INT1_LINE_STATE_CHARG_DET_N_VBUS_OVV_SHIFT 0
+#define PALMAS_INT1_LINE_STATE_CHARG_DET_N_VBUS_OVV_SHIFT 0x00
/* Bit definitions for INT2_STATUS */
#define PALMAS_INT2_STATUS_VAC_ACOK 0x80
-#define PALMAS_INT2_STATUS_VAC_ACOK_SHIFT 7
+#define PALMAS_INT2_STATUS_VAC_ACOK_SHIFT 0x07
#define PALMAS_INT2_STATUS_SHORT 0x40
-#define PALMAS_INT2_STATUS_SHORT_SHIFT 6
+#define PALMAS_INT2_STATUS_SHORT_SHIFT 0x06
#define PALMAS_INT2_STATUS_FBI_BB 0x20
-#define PALMAS_INT2_STATUS_FBI_BB_SHIFT 5
+#define PALMAS_INT2_STATUS_FBI_BB_SHIFT 0x05
#define PALMAS_INT2_STATUS_RESET_IN 0x10
-#define PALMAS_INT2_STATUS_RESET_IN_SHIFT 4
+#define PALMAS_INT2_STATUS_RESET_IN_SHIFT 0x04
#define PALMAS_INT2_STATUS_BATREMOVAL 0x08
-#define PALMAS_INT2_STATUS_BATREMOVAL_SHIFT 3
+#define PALMAS_INT2_STATUS_BATREMOVAL_SHIFT 0x03
#define PALMAS_INT2_STATUS_WDT 0x04
-#define PALMAS_INT2_STATUS_WDT_SHIFT 2
+#define PALMAS_INT2_STATUS_WDT_SHIFT 0x02
#define PALMAS_INT2_STATUS_RTC_TIMER 0x02
-#define PALMAS_INT2_STATUS_RTC_TIMER_SHIFT 1
+#define PALMAS_INT2_STATUS_RTC_TIMER_SHIFT 0x01
#define PALMAS_INT2_STATUS_RTC_ALARM 0x01
-#define PALMAS_INT2_STATUS_RTC_ALARM_SHIFT 0
+#define PALMAS_INT2_STATUS_RTC_ALARM_SHIFT 0x00
/* Bit definitions for INT2_MASK */
#define PALMAS_INT2_MASK_VAC_ACOK 0x80
-#define PALMAS_INT2_MASK_VAC_ACOK_SHIFT 7
+#define PALMAS_INT2_MASK_VAC_ACOK_SHIFT 0x07
#define PALMAS_INT2_MASK_SHORT 0x40
-#define PALMAS_INT2_MASK_SHORT_SHIFT 6
+#define PALMAS_INT2_MASK_SHORT_SHIFT 0x06
#define PALMAS_INT2_MASK_FBI_BB 0x20
-#define PALMAS_INT2_MASK_FBI_BB_SHIFT 5
+#define PALMAS_INT2_MASK_FBI_BB_SHIFT 0x05
#define PALMAS_INT2_MASK_RESET_IN 0x10
-#define PALMAS_INT2_MASK_RESET_IN_SHIFT 4
+#define PALMAS_INT2_MASK_RESET_IN_SHIFT 0x04
#define PALMAS_INT2_MASK_BATREMOVAL 0x08
-#define PALMAS_INT2_MASK_BATREMOVAL_SHIFT 3
+#define PALMAS_INT2_MASK_BATREMOVAL_SHIFT 0x03
#define PALMAS_INT2_MASK_WDT 0x04
-#define PALMAS_INT2_MASK_WDT_SHIFT 2
+#define PALMAS_INT2_MASK_WDT_SHIFT 0x02
#define PALMAS_INT2_MASK_RTC_TIMER 0x02
-#define PALMAS_INT2_MASK_RTC_TIMER_SHIFT 1
+#define PALMAS_INT2_MASK_RTC_TIMER_SHIFT 0x01
#define PALMAS_INT2_MASK_RTC_ALARM 0x01
-#define PALMAS_INT2_MASK_RTC_ALARM_SHIFT 0
+#define PALMAS_INT2_MASK_RTC_ALARM_SHIFT 0x00
/* Bit definitions for INT2_LINE_STATE */
#define PALMAS_INT2_LINE_STATE_VAC_ACOK 0x80
-#define PALMAS_INT2_LINE_STATE_VAC_ACOK_SHIFT 7
+#define PALMAS_INT2_LINE_STATE_VAC_ACOK_SHIFT 0x07
#define PALMAS_INT2_LINE_STATE_SHORT 0x40
-#define PALMAS_INT2_LINE_STATE_SHORT_SHIFT 6
+#define PALMAS_INT2_LINE_STATE_SHORT_SHIFT 0x06
#define PALMAS_INT2_LINE_STATE_FBI_BB 0x20
-#define PALMAS_INT2_LINE_STATE_FBI_BB_SHIFT 5
+#define PALMAS_INT2_LINE_STATE_FBI_BB_SHIFT 0x05
#define PALMAS_INT2_LINE_STATE_RESET_IN 0x10
-#define PALMAS_INT2_LINE_STATE_RESET_IN_SHIFT 4
+#define PALMAS_INT2_LINE_STATE_RESET_IN_SHIFT 0x04
#define PALMAS_INT2_LINE_STATE_BATREMOVAL 0x08
-#define PALMAS_INT2_LINE_STATE_BATREMOVAL_SHIFT 3
+#define PALMAS_INT2_LINE_STATE_BATREMOVAL_SHIFT 0x03
#define PALMAS_INT2_LINE_STATE_WDT 0x04
-#define PALMAS_INT2_LINE_STATE_WDT_SHIFT 2
+#define PALMAS_INT2_LINE_STATE_WDT_SHIFT 0x02
#define PALMAS_INT2_LINE_STATE_RTC_TIMER 0x02
-#define PALMAS_INT2_LINE_STATE_RTC_TIMER_SHIFT 1
+#define PALMAS_INT2_LINE_STATE_RTC_TIMER_SHIFT 0x01
#define PALMAS_INT2_LINE_STATE_RTC_ALARM 0x01
-#define PALMAS_INT2_LINE_STATE_RTC_ALARM_SHIFT 0
+#define PALMAS_INT2_LINE_STATE_RTC_ALARM_SHIFT 0x00
/* Bit definitions for INT3_STATUS */
#define PALMAS_INT3_STATUS_VBUS 0x80
-#define PALMAS_INT3_STATUS_VBUS_SHIFT 7
+#define PALMAS_INT3_STATUS_VBUS_SHIFT 0x07
#define PALMAS_INT3_STATUS_VBUS_OTG 0x40
-#define PALMAS_INT3_STATUS_VBUS_OTG_SHIFT 6
+#define PALMAS_INT3_STATUS_VBUS_OTG_SHIFT 0x06
#define PALMAS_INT3_STATUS_ID 0x20
-#define PALMAS_INT3_STATUS_ID_SHIFT 5
+#define PALMAS_INT3_STATUS_ID_SHIFT 0x05
#define PALMAS_INT3_STATUS_ID_OTG 0x10
-#define PALMAS_INT3_STATUS_ID_OTG_SHIFT 4
+#define PALMAS_INT3_STATUS_ID_OTG_SHIFT 0x04
#define PALMAS_INT3_STATUS_GPADC_EOC_RT 0x08
-#define PALMAS_INT3_STATUS_GPADC_EOC_RT_SHIFT 3
+#define PALMAS_INT3_STATUS_GPADC_EOC_RT_SHIFT 0x03
#define PALMAS_INT3_STATUS_GPADC_EOC_SW 0x04
-#define PALMAS_INT3_STATUS_GPADC_EOC_SW_SHIFT 2
+#define PALMAS_INT3_STATUS_GPADC_EOC_SW_SHIFT 0x02
#define PALMAS_INT3_STATUS_GPADC_AUTO_1 0x02
-#define PALMAS_INT3_STATUS_GPADC_AUTO_1_SHIFT 1
+#define PALMAS_INT3_STATUS_GPADC_AUTO_1_SHIFT 0x01
#define PALMAS_INT3_STATUS_GPADC_AUTO_0 0x01
-#define PALMAS_INT3_STATUS_GPADC_AUTO_0_SHIFT 0
+#define PALMAS_INT3_STATUS_GPADC_AUTO_0_SHIFT 0x00
/* Bit definitions for INT3_MASK */
#define PALMAS_INT3_MASK_VBUS 0x80
-#define PALMAS_INT3_MASK_VBUS_SHIFT 7
+#define PALMAS_INT3_MASK_VBUS_SHIFT 0x07
#define PALMAS_INT3_MASK_VBUS_OTG 0x40
-#define PALMAS_INT3_MASK_VBUS_OTG_SHIFT 6
+#define PALMAS_INT3_MASK_VBUS_OTG_SHIFT 0x06
#define PALMAS_INT3_MASK_ID 0x20
-#define PALMAS_INT3_MASK_ID_SHIFT 5
+#define PALMAS_INT3_MASK_ID_SHIFT 0x05
#define PALMAS_INT3_MASK_ID_OTG 0x10
-#define PALMAS_INT3_MASK_ID_OTG_SHIFT 4
+#define PALMAS_INT3_MASK_ID_OTG_SHIFT 0x04
#define PALMAS_INT3_MASK_GPADC_EOC_RT 0x08
-#define PALMAS_INT3_MASK_GPADC_EOC_RT_SHIFT 3
+#define PALMAS_INT3_MASK_GPADC_EOC_RT_SHIFT 0x03
#define PALMAS_INT3_MASK_GPADC_EOC_SW 0x04
-#define PALMAS_INT3_MASK_GPADC_EOC_SW_SHIFT 2
+#define PALMAS_INT3_MASK_GPADC_EOC_SW_SHIFT 0x02
#define PALMAS_INT3_MASK_GPADC_AUTO_1 0x02
-#define PALMAS_INT3_MASK_GPADC_AUTO_1_SHIFT 1
+#define PALMAS_INT3_MASK_GPADC_AUTO_1_SHIFT 0x01
#define PALMAS_INT3_MASK_GPADC_AUTO_0 0x01
-#define PALMAS_INT3_MASK_GPADC_AUTO_0_SHIFT 0
+#define PALMAS_INT3_MASK_GPADC_AUTO_0_SHIFT 0x00
/* Bit definitions for INT3_LINE_STATE */
#define PALMAS_INT3_LINE_STATE_VBUS 0x80
-#define PALMAS_INT3_LINE_STATE_VBUS_SHIFT 7
+#define PALMAS_INT3_LINE_STATE_VBUS_SHIFT 0x07
#define PALMAS_INT3_LINE_STATE_VBUS_OTG 0x40
-#define PALMAS_INT3_LINE_STATE_VBUS_OTG_SHIFT 6
+#define PALMAS_INT3_LINE_STATE_VBUS_OTG_SHIFT 0x06
#define PALMAS_INT3_LINE_STATE_ID 0x20
-#define PALMAS_INT3_LINE_STATE_ID_SHIFT 5
+#define PALMAS_INT3_LINE_STATE_ID_SHIFT 0x05
#define PALMAS_INT3_LINE_STATE_ID_OTG 0x10
-#define PALMAS_INT3_LINE_STATE_ID_OTG_SHIFT 4
+#define PALMAS_INT3_LINE_STATE_ID_OTG_SHIFT 0x04
#define PALMAS_INT3_LINE_STATE_GPADC_EOC_RT 0x08
-#define PALMAS_INT3_LINE_STATE_GPADC_EOC_RT_SHIFT 3
+#define PALMAS_INT3_LINE_STATE_GPADC_EOC_RT_SHIFT 0x03
#define PALMAS_INT3_LINE_STATE_GPADC_EOC_SW 0x04
-#define PALMAS_INT3_LINE_STATE_GPADC_EOC_SW_SHIFT 2
+#define PALMAS_INT3_LINE_STATE_GPADC_EOC_SW_SHIFT 0x02
#define PALMAS_INT3_LINE_STATE_GPADC_AUTO_1 0x02
-#define PALMAS_INT3_LINE_STATE_GPADC_AUTO_1_SHIFT 1
+#define PALMAS_INT3_LINE_STATE_GPADC_AUTO_1_SHIFT 0x01
#define PALMAS_INT3_LINE_STATE_GPADC_AUTO_0 0x01
-#define PALMAS_INT3_LINE_STATE_GPADC_AUTO_0_SHIFT 0
+#define PALMAS_INT3_LINE_STATE_GPADC_AUTO_0_SHIFT 0x00
/* Bit definitions for INT4_STATUS */
#define PALMAS_INT4_STATUS_GPIO_7 0x80
-#define PALMAS_INT4_STATUS_GPIO_7_SHIFT 7
+#define PALMAS_INT4_STATUS_GPIO_7_SHIFT 0x07
#define PALMAS_INT4_STATUS_GPIO_6 0x40
-#define PALMAS_INT4_STATUS_GPIO_6_SHIFT 6
+#define PALMAS_INT4_STATUS_GPIO_6_SHIFT 0x06
#define PALMAS_INT4_STATUS_GPIO_5 0x20
-#define PALMAS_INT4_STATUS_GPIO_5_SHIFT 5
+#define PALMAS_INT4_STATUS_GPIO_5_SHIFT 0x05
#define PALMAS_INT4_STATUS_GPIO_4 0x10
-#define PALMAS_INT4_STATUS_GPIO_4_SHIFT 4
+#define PALMAS_INT4_STATUS_GPIO_4_SHIFT 0x04
#define PALMAS_INT4_STATUS_GPIO_3 0x08
-#define PALMAS_INT4_STATUS_GPIO_3_SHIFT 3
+#define PALMAS_INT4_STATUS_GPIO_3_SHIFT 0x03
#define PALMAS_INT4_STATUS_GPIO_2 0x04
-#define PALMAS_INT4_STATUS_GPIO_2_SHIFT 2
+#define PALMAS_INT4_STATUS_GPIO_2_SHIFT 0x02
#define PALMAS_INT4_STATUS_GPIO_1 0x02
-#define PALMAS_INT4_STATUS_GPIO_1_SHIFT 1
+#define PALMAS_INT4_STATUS_GPIO_1_SHIFT 0x01
#define PALMAS_INT4_STATUS_GPIO_0 0x01
-#define PALMAS_INT4_STATUS_GPIO_0_SHIFT 0
+#define PALMAS_INT4_STATUS_GPIO_0_SHIFT 0x00
/* Bit definitions for INT4_MASK */
#define PALMAS_INT4_MASK_GPIO_7 0x80
-#define PALMAS_INT4_MASK_GPIO_7_SHIFT 7
+#define PALMAS_INT4_MASK_GPIO_7_SHIFT 0x07
#define PALMAS_INT4_MASK_GPIO_6 0x40
-#define PALMAS_INT4_MASK_GPIO_6_SHIFT 6
+#define PALMAS_INT4_MASK_GPIO_6_SHIFT 0x06
#define PALMAS_INT4_MASK_GPIO_5 0x20
-#define PALMAS_INT4_MASK_GPIO_5_SHIFT 5
+#define PALMAS_INT4_MASK_GPIO_5_SHIFT 0x05
#define PALMAS_INT4_MASK_GPIO_4 0x10
-#define PALMAS_INT4_MASK_GPIO_4_SHIFT 4
+#define PALMAS_INT4_MASK_GPIO_4_SHIFT 0x04
#define PALMAS_INT4_MASK_GPIO_3 0x08
-#define PALMAS_INT4_MASK_GPIO_3_SHIFT 3
+#define PALMAS_INT4_MASK_GPIO_3_SHIFT 0x03
#define PALMAS_INT4_MASK_GPIO_2 0x04
-#define PALMAS_INT4_MASK_GPIO_2_SHIFT 2
+#define PALMAS_INT4_MASK_GPIO_2_SHIFT 0x02
#define PALMAS_INT4_MASK_GPIO_1 0x02
-#define PALMAS_INT4_MASK_GPIO_1_SHIFT 1
+#define PALMAS_INT4_MASK_GPIO_1_SHIFT 0x01
#define PALMAS_INT4_MASK_GPIO_0 0x01
-#define PALMAS_INT4_MASK_GPIO_0_SHIFT 0
+#define PALMAS_INT4_MASK_GPIO_0_SHIFT 0x00
/* Bit definitions for INT4_LINE_STATE */
#define PALMAS_INT4_LINE_STATE_GPIO_7 0x80
-#define PALMAS_INT4_LINE_STATE_GPIO_7_SHIFT 7
+#define PALMAS_INT4_LINE_STATE_GPIO_7_SHIFT 0x07
#define PALMAS_INT4_LINE_STATE_GPIO_6 0x40
-#define PALMAS_INT4_LINE_STATE_GPIO_6_SHIFT 6
+#define PALMAS_INT4_LINE_STATE_GPIO_6_SHIFT 0x06
#define PALMAS_INT4_LINE_STATE_GPIO_5 0x20
-#define PALMAS_INT4_LINE_STATE_GPIO_5_SHIFT 5
+#define PALMAS_INT4_LINE_STATE_GPIO_5_SHIFT 0x05
#define PALMAS_INT4_LINE_STATE_GPIO_4 0x10
-#define PALMAS_INT4_LINE_STATE_GPIO_4_SHIFT 4
+#define PALMAS_INT4_LINE_STATE_GPIO_4_SHIFT 0x04
#define PALMAS_INT4_LINE_STATE_GPIO_3 0x08
-#define PALMAS_INT4_LINE_STATE_GPIO_3_SHIFT 3
+#define PALMAS_INT4_LINE_STATE_GPIO_3_SHIFT 0x03
#define PALMAS_INT4_LINE_STATE_GPIO_2 0x04
-#define PALMAS_INT4_LINE_STATE_GPIO_2_SHIFT 2
+#define PALMAS_INT4_LINE_STATE_GPIO_2_SHIFT 0x02
#define PALMAS_INT4_LINE_STATE_GPIO_1 0x02
-#define PALMAS_INT4_LINE_STATE_GPIO_1_SHIFT 1
+#define PALMAS_INT4_LINE_STATE_GPIO_1_SHIFT 0x01
#define PALMAS_INT4_LINE_STATE_GPIO_0 0x01
-#define PALMAS_INT4_LINE_STATE_GPIO_0_SHIFT 0
+#define PALMAS_INT4_LINE_STATE_GPIO_0_SHIFT 0x00
/* Bit definitions for INT4_EDGE_DETECT1 */
#define PALMAS_INT4_EDGE_DETECT1_GPIO_3_RISING 0x80
-#define PALMAS_INT4_EDGE_DETECT1_GPIO_3_RISING_SHIFT 7
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_3_RISING_SHIFT 0x07
#define PALMAS_INT4_EDGE_DETECT1_GPIO_3_FALLING 0x40
-#define PALMAS_INT4_EDGE_DETECT1_GPIO_3_FALLING_SHIFT 6
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_3_FALLING_SHIFT 0x06
#define PALMAS_INT4_EDGE_DETECT1_GPIO_2_RISING 0x20
-#define PALMAS_INT4_EDGE_DETECT1_GPIO_2_RISING_SHIFT 5
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_2_RISING_SHIFT 0x05
#define PALMAS_INT4_EDGE_DETECT1_GPIO_2_FALLING 0x10
-#define PALMAS_INT4_EDGE_DETECT1_GPIO_2_FALLING_SHIFT 4
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_2_FALLING_SHIFT 0x04
#define PALMAS_INT4_EDGE_DETECT1_GPIO_1_RISING 0x08
-#define PALMAS_INT4_EDGE_DETECT1_GPIO_1_RISING_SHIFT 3
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_1_RISING_SHIFT 0x03
#define PALMAS_INT4_EDGE_DETECT1_GPIO_1_FALLING 0x04
-#define PALMAS_INT4_EDGE_DETECT1_GPIO_1_FALLING_SHIFT 2
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_1_FALLING_SHIFT 0x02
#define PALMAS_INT4_EDGE_DETECT1_GPIO_0_RISING 0x02
-#define PALMAS_INT4_EDGE_DETECT1_GPIO_0_RISING_SHIFT 1
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_0_RISING_SHIFT 0x01
#define PALMAS_INT4_EDGE_DETECT1_GPIO_0_FALLING 0x01
-#define PALMAS_INT4_EDGE_DETECT1_GPIO_0_FALLING_SHIFT 0
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_0_FALLING_SHIFT 0x00
/* Bit definitions for INT4_EDGE_DETECT2 */
#define PALMAS_INT4_EDGE_DETECT2_GPIO_7_RISING 0x80
-#define PALMAS_INT4_EDGE_DETECT2_GPIO_7_RISING_SHIFT 7
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_7_RISING_SHIFT 0x07
#define PALMAS_INT4_EDGE_DETECT2_GPIO_7_FALLING 0x40
-#define PALMAS_INT4_EDGE_DETECT2_GPIO_7_FALLING_SHIFT 6
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_7_FALLING_SHIFT 0x06
#define PALMAS_INT4_EDGE_DETECT2_GPIO_6_RISING 0x20
-#define PALMAS_INT4_EDGE_DETECT2_GPIO_6_RISING_SHIFT 5
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_6_RISING_SHIFT 0x05
#define PALMAS_INT4_EDGE_DETECT2_GPIO_6_FALLING 0x10
-#define PALMAS_INT4_EDGE_DETECT2_GPIO_6_FALLING_SHIFT 4
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_6_FALLING_SHIFT 0x04
#define PALMAS_INT4_EDGE_DETECT2_GPIO_5_RISING 0x08
-#define PALMAS_INT4_EDGE_DETECT2_GPIO_5_RISING_SHIFT 3
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_5_RISING_SHIFT 0x03
#define PALMAS_INT4_EDGE_DETECT2_GPIO_5_FALLING 0x04
-#define PALMAS_INT4_EDGE_DETECT2_GPIO_5_FALLING_SHIFT 2
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_5_FALLING_SHIFT 0x02
#define PALMAS_INT4_EDGE_DETECT2_GPIO_4_RISING 0x02
-#define PALMAS_INT4_EDGE_DETECT2_GPIO_4_RISING_SHIFT 1
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_4_RISING_SHIFT 0x01
#define PALMAS_INT4_EDGE_DETECT2_GPIO_4_FALLING 0x01
-#define PALMAS_INT4_EDGE_DETECT2_GPIO_4_FALLING_SHIFT 0
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_4_FALLING_SHIFT 0x00
/* Bit definitions for INT_CTRL */
#define PALMAS_INT_CTRL_INT_PENDING 0x04
-#define PALMAS_INT_CTRL_INT_PENDING_SHIFT 2
+#define PALMAS_INT_CTRL_INT_PENDING_SHIFT 0x02
#define PALMAS_INT_CTRL_INT_CLEAR 0x01
-#define PALMAS_INT_CTRL_INT_CLEAR_SHIFT 0
+#define PALMAS_INT_CTRL_INT_CLEAR_SHIFT 0x00
/* Registers for function USB_OTG */
-#define PALMAS_USB_WAKEUP 0x3
-#define PALMAS_USB_VBUS_CTRL_SET 0x4
-#define PALMAS_USB_VBUS_CTRL_CLR 0x5
-#define PALMAS_USB_ID_CTRL_SET 0x6
-#define PALMAS_USB_ID_CTRL_CLEAR 0x7
-#define PALMAS_USB_VBUS_INT_SRC 0x8
-#define PALMAS_USB_VBUS_INT_LATCH_SET 0x9
-#define PALMAS_USB_VBUS_INT_LATCH_CLR 0xA
-#define PALMAS_USB_VBUS_INT_EN_LO_SET 0xB
-#define PALMAS_USB_VBUS_INT_EN_LO_CLR 0xC
-#define PALMAS_USB_VBUS_INT_EN_HI_SET 0xD
-#define PALMAS_USB_VBUS_INT_EN_HI_CLR 0xE
-#define PALMAS_USB_ID_INT_SRC 0xF
+#define PALMAS_USB_WAKEUP 0x03
+#define PALMAS_USB_VBUS_CTRL_SET 0x04
+#define PALMAS_USB_VBUS_CTRL_CLR 0x05
+#define PALMAS_USB_ID_CTRL_SET 0x06
+#define PALMAS_USB_ID_CTRL_CLEAR 0x07
+#define PALMAS_USB_VBUS_INT_SRC 0x08
+#define PALMAS_USB_VBUS_INT_LATCH_SET 0x09
+#define PALMAS_USB_VBUS_INT_LATCH_CLR 0x0A
+#define PALMAS_USB_VBUS_INT_EN_LO_SET 0x0B
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR 0x0C
+#define PALMAS_USB_VBUS_INT_EN_HI_SET 0x0D
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR 0x0E
+#define PALMAS_USB_ID_INT_SRC 0x0F
#define PALMAS_USB_ID_INT_LATCH_SET 0x10
#define PALMAS_USB_ID_INT_LATCH_CLR 0x11
#define PALMAS_USB_ID_INT_EN_LO_SET 0x12
@@ -2250,306 +2250,306 @@ enum usb_irq_events {
/* Bit definitions for USB_WAKEUP */
#define PALMAS_USB_WAKEUP_ID_WK_UP_COMP 0x01
-#define PALMAS_USB_WAKEUP_ID_WK_UP_COMP_SHIFT 0
+#define PALMAS_USB_WAKEUP_ID_WK_UP_COMP_SHIFT 0x00
/* Bit definitions for USB_VBUS_CTRL_SET */
#define PALMAS_USB_VBUS_CTRL_SET_VBUS_CHRG_VSYS 0x80
-#define PALMAS_USB_VBUS_CTRL_SET_VBUS_CHRG_VSYS_SHIFT 7
+#define PALMAS_USB_VBUS_CTRL_SET_VBUS_CHRG_VSYS_SHIFT 0x07
#define PALMAS_USB_VBUS_CTRL_SET_VBUS_DISCHRG 0x20
-#define PALMAS_USB_VBUS_CTRL_SET_VBUS_DISCHRG_SHIFT 5
+#define PALMAS_USB_VBUS_CTRL_SET_VBUS_DISCHRG_SHIFT 0x05
#define PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SRC 0x10
-#define PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SRC_SHIFT 4
+#define PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SRC_SHIFT 0x04
#define PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SINK 0x08
-#define PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SINK_SHIFT 3
+#define PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SINK_SHIFT 0x03
#define PALMAS_USB_VBUS_CTRL_SET_VBUS_ACT_COMP 0x04
-#define PALMAS_USB_VBUS_CTRL_SET_VBUS_ACT_COMP_SHIFT 2
+#define PALMAS_USB_VBUS_CTRL_SET_VBUS_ACT_COMP_SHIFT 0x02
/* Bit definitions for USB_VBUS_CTRL_CLR */
#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_CHRG_VSYS 0x80
-#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_CHRG_VSYS_SHIFT 7
+#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_CHRG_VSYS_SHIFT 0x07
#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_DISCHRG 0x20
-#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_DISCHRG_SHIFT 5
+#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_DISCHRG_SHIFT 0x05
#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_IADP_SRC 0x10
-#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_IADP_SRC_SHIFT 4
+#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_IADP_SRC_SHIFT 0x04
#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_IADP_SINK 0x08
-#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_IADP_SINK_SHIFT 3
+#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_IADP_SINK_SHIFT 0x03
#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_ACT_COMP 0x04
-#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_ACT_COMP_SHIFT 2
+#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_ACT_COMP_SHIFT 0x02
/* Bit definitions for USB_ID_CTRL_SET */
#define PALMAS_USB_ID_CTRL_SET_ID_PU_220K 0x80
-#define PALMAS_USB_ID_CTRL_SET_ID_PU_220K_SHIFT 7
+#define PALMAS_USB_ID_CTRL_SET_ID_PU_220K_SHIFT 0x07
#define PALMAS_USB_ID_CTRL_SET_ID_PU_100K 0x40
-#define PALMAS_USB_ID_CTRL_SET_ID_PU_100K_SHIFT 6
+#define PALMAS_USB_ID_CTRL_SET_ID_PU_100K_SHIFT 0x06
#define PALMAS_USB_ID_CTRL_SET_ID_GND_DRV 0x20
-#define PALMAS_USB_ID_CTRL_SET_ID_GND_DRV_SHIFT 5
+#define PALMAS_USB_ID_CTRL_SET_ID_GND_DRV_SHIFT 0x05
#define PALMAS_USB_ID_CTRL_SET_ID_SRC_16U 0x10
-#define PALMAS_USB_ID_CTRL_SET_ID_SRC_16U_SHIFT 4
+#define PALMAS_USB_ID_CTRL_SET_ID_SRC_16U_SHIFT 0x04
#define PALMAS_USB_ID_CTRL_SET_ID_SRC_5U 0x08
-#define PALMAS_USB_ID_CTRL_SET_ID_SRC_5U_SHIFT 3
+#define PALMAS_USB_ID_CTRL_SET_ID_SRC_5U_SHIFT 0x03
#define PALMAS_USB_ID_CTRL_SET_ID_ACT_COMP 0x04
-#define PALMAS_USB_ID_CTRL_SET_ID_ACT_COMP_SHIFT 2
+#define PALMAS_USB_ID_CTRL_SET_ID_ACT_COMP_SHIFT 0x02
/* Bit definitions for USB_ID_CTRL_CLEAR */
#define PALMAS_USB_ID_CTRL_CLEAR_ID_PU_220K 0x80
-#define PALMAS_USB_ID_CTRL_CLEAR_ID_PU_220K_SHIFT 7
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_PU_220K_SHIFT 0x07
#define PALMAS_USB_ID_CTRL_CLEAR_ID_PU_100K 0x40
-#define PALMAS_USB_ID_CTRL_CLEAR_ID_PU_100K_SHIFT 6
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_PU_100K_SHIFT 0x06
#define PALMAS_USB_ID_CTRL_CLEAR_ID_GND_DRV 0x20
-#define PALMAS_USB_ID_CTRL_CLEAR_ID_GND_DRV_SHIFT 5
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_GND_DRV_SHIFT 0x05
#define PALMAS_USB_ID_CTRL_CLEAR_ID_SRC_16U 0x10
-#define PALMAS_USB_ID_CTRL_CLEAR_ID_SRC_16U_SHIFT 4
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_SRC_16U_SHIFT 0x04
#define PALMAS_USB_ID_CTRL_CLEAR_ID_SRC_5U 0x08
-#define PALMAS_USB_ID_CTRL_CLEAR_ID_SRC_5U_SHIFT 3
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_SRC_5U_SHIFT 0x03
#define PALMAS_USB_ID_CTRL_CLEAR_ID_ACT_COMP 0x04
-#define PALMAS_USB_ID_CTRL_CLEAR_ID_ACT_COMP_SHIFT 2
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_ACT_COMP_SHIFT 0x02
/* Bit definitions for USB_VBUS_INT_SRC */
#define PALMAS_USB_VBUS_INT_SRC_VOTG_SESS_VLD 0x80
-#define PALMAS_USB_VBUS_INT_SRC_VOTG_SESS_VLD_SHIFT 7
+#define PALMAS_USB_VBUS_INT_SRC_VOTG_SESS_VLD_SHIFT 0x07
#define PALMAS_USB_VBUS_INT_SRC_VADP_PRB 0x40
-#define PALMAS_USB_VBUS_INT_SRC_VADP_PRB_SHIFT 6
+#define PALMAS_USB_VBUS_INT_SRC_VADP_PRB_SHIFT 0x06
#define PALMAS_USB_VBUS_INT_SRC_VADP_SNS 0x20
-#define PALMAS_USB_VBUS_INT_SRC_VADP_SNS_SHIFT 5
+#define PALMAS_USB_VBUS_INT_SRC_VADP_SNS_SHIFT 0x05
#define PALMAS_USB_VBUS_INT_SRC_VA_VBUS_VLD 0x08
-#define PALMAS_USB_VBUS_INT_SRC_VA_VBUS_VLD_SHIFT 3
+#define PALMAS_USB_VBUS_INT_SRC_VA_VBUS_VLD_SHIFT 0x03
#define PALMAS_USB_VBUS_INT_SRC_VA_SESS_VLD 0x04
-#define PALMAS_USB_VBUS_INT_SRC_VA_SESS_VLD_SHIFT 2
+#define PALMAS_USB_VBUS_INT_SRC_VA_SESS_VLD_SHIFT 0x02
#define PALMAS_USB_VBUS_INT_SRC_VB_SESS_VLD 0x02
-#define PALMAS_USB_VBUS_INT_SRC_VB_SESS_VLD_SHIFT 1
+#define PALMAS_USB_VBUS_INT_SRC_VB_SESS_VLD_SHIFT 0x01
#define PALMAS_USB_VBUS_INT_SRC_VB_SESS_END 0x01
-#define PALMAS_USB_VBUS_INT_SRC_VB_SESS_END_SHIFT 0
+#define PALMAS_USB_VBUS_INT_SRC_VB_SESS_END_SHIFT 0x00
/* Bit definitions for USB_VBUS_INT_LATCH_SET */
#define PALMAS_USB_VBUS_INT_LATCH_SET_VOTG_SESS_VLD 0x80
-#define PALMAS_USB_VBUS_INT_LATCH_SET_VOTG_SESS_VLD_SHIFT 7
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VOTG_SESS_VLD_SHIFT 0x07
#define PALMAS_USB_VBUS_INT_LATCH_SET_VADP_PRB 0x40
-#define PALMAS_USB_VBUS_INT_LATCH_SET_VADP_PRB_SHIFT 6
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VADP_PRB_SHIFT 0x06
#define PALMAS_USB_VBUS_INT_LATCH_SET_VADP_SNS 0x20
-#define PALMAS_USB_VBUS_INT_LATCH_SET_VADP_SNS_SHIFT 5
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VADP_SNS_SHIFT 0x05
#define PALMAS_USB_VBUS_INT_LATCH_SET_ADP 0x10
-#define PALMAS_USB_VBUS_INT_LATCH_SET_ADP_SHIFT 4
+#define PALMAS_USB_VBUS_INT_LATCH_SET_ADP_SHIFT 0x04
#define PALMAS_USB_VBUS_INT_LATCH_SET_VA_VBUS_VLD 0x08
-#define PALMAS_USB_VBUS_INT_LATCH_SET_VA_VBUS_VLD_SHIFT 3
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VA_VBUS_VLD_SHIFT 0x03
#define PALMAS_USB_VBUS_INT_LATCH_SET_VA_SESS_VLD 0x04
-#define PALMAS_USB_VBUS_INT_LATCH_SET_VA_SESS_VLD_SHIFT 2
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VA_SESS_VLD_SHIFT 0x02
#define PALMAS_USB_VBUS_INT_LATCH_SET_VB_SESS_VLD 0x02
-#define PALMAS_USB_VBUS_INT_LATCH_SET_VB_SESS_VLD_SHIFT 1
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VB_SESS_VLD_SHIFT 0x01
#define PALMAS_USB_VBUS_INT_LATCH_SET_VB_SESS_END 0x01
-#define PALMAS_USB_VBUS_INT_LATCH_SET_VB_SESS_END_SHIFT 0
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VB_SESS_END_SHIFT 0x00
/* Bit definitions for USB_VBUS_INT_LATCH_CLR */
#define PALMAS_USB_VBUS_INT_LATCH_CLR_VOTG_SESS_VLD 0x80
-#define PALMAS_USB_VBUS_INT_LATCH_CLR_VOTG_SESS_VLD_SHIFT 7
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VOTG_SESS_VLD_SHIFT 0x07
#define PALMAS_USB_VBUS_INT_LATCH_CLR_VADP_PRB 0x40
-#define PALMAS_USB_VBUS_INT_LATCH_CLR_VADP_PRB_SHIFT 6
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VADP_PRB_SHIFT 0x06
#define PALMAS_USB_VBUS_INT_LATCH_CLR_VADP_SNS 0x20
-#define PALMAS_USB_VBUS_INT_LATCH_CLR_VADP_SNS_SHIFT 5
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VADP_SNS_SHIFT 0x05
#define PALMAS_USB_VBUS_INT_LATCH_CLR_ADP 0x10
-#define PALMAS_USB_VBUS_INT_LATCH_CLR_ADP_SHIFT 4
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_ADP_SHIFT 0x04
#define PALMAS_USB_VBUS_INT_LATCH_CLR_VA_VBUS_VLD 0x08
-#define PALMAS_USB_VBUS_INT_LATCH_CLR_VA_VBUS_VLD_SHIFT 3
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VA_VBUS_VLD_SHIFT 0x03
#define PALMAS_USB_VBUS_INT_LATCH_CLR_VA_SESS_VLD 0x04
-#define PALMAS_USB_VBUS_INT_LATCH_CLR_VA_SESS_VLD_SHIFT 2
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VA_SESS_VLD_SHIFT 0x02
#define PALMAS_USB_VBUS_INT_LATCH_CLR_VB_SESS_VLD 0x02
-#define PALMAS_USB_VBUS_INT_LATCH_CLR_VB_SESS_VLD_SHIFT 1
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VB_SESS_VLD_SHIFT 0x01
#define PALMAS_USB_VBUS_INT_LATCH_CLR_VB_SESS_END 0x01
-#define PALMAS_USB_VBUS_INT_LATCH_CLR_VB_SESS_END_SHIFT 0
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VB_SESS_END_SHIFT 0x00
/* Bit definitions for USB_VBUS_INT_EN_LO_SET */
#define PALMAS_USB_VBUS_INT_EN_LO_SET_VOTG_SESS_VLD 0x80
-#define PALMAS_USB_VBUS_INT_EN_LO_SET_VOTG_SESS_VLD_SHIFT 7
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VOTG_SESS_VLD_SHIFT 0x07
#define PALMAS_USB_VBUS_INT_EN_LO_SET_VADP_PRB 0x40
-#define PALMAS_USB_VBUS_INT_EN_LO_SET_VADP_PRB_SHIFT 6
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VADP_PRB_SHIFT 0x06
#define PALMAS_USB_VBUS_INT_EN_LO_SET_VADP_SNS 0x20
-#define PALMAS_USB_VBUS_INT_EN_LO_SET_VADP_SNS_SHIFT 5
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VADP_SNS_SHIFT 0x05
#define PALMAS_USB_VBUS_INT_EN_LO_SET_VA_VBUS_VLD 0x08
-#define PALMAS_USB_VBUS_INT_EN_LO_SET_VA_VBUS_VLD_SHIFT 3
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VA_VBUS_VLD_SHIFT 0x03
#define PALMAS_USB_VBUS_INT_EN_LO_SET_VA_SESS_VLD 0x04
-#define PALMAS_USB_VBUS_INT_EN_LO_SET_VA_SESS_VLD_SHIFT 2
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VA_SESS_VLD_SHIFT 0x02
#define PALMAS_USB_VBUS_INT_EN_LO_SET_VB_SESS_VLD 0x02
-#define PALMAS_USB_VBUS_INT_EN_LO_SET_VB_SESS_VLD_SHIFT 1
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VB_SESS_VLD_SHIFT 0x01
#define PALMAS_USB_VBUS_INT_EN_LO_SET_VB_SESS_END 0x01
-#define PALMAS_USB_VBUS_INT_EN_LO_SET_VB_SESS_END_SHIFT 0
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VB_SESS_END_SHIFT 0x00
/* Bit definitions for USB_VBUS_INT_EN_LO_CLR */
#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VOTG_SESS_VLD 0x80
-#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VOTG_SESS_VLD_SHIFT 7
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VOTG_SESS_VLD_SHIFT 0x07
#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VADP_PRB 0x40
-#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VADP_PRB_SHIFT 6
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VADP_PRB_SHIFT 0x06
#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VADP_SNS 0x20
-#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VADP_SNS_SHIFT 5
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VADP_SNS_SHIFT 0x05
#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VA_VBUS_VLD 0x08
-#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VA_VBUS_VLD_SHIFT 3
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VA_VBUS_VLD_SHIFT 0x03
#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VA_SESS_VLD 0x04
-#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VA_SESS_VLD_SHIFT 2
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VA_SESS_VLD_SHIFT 0x02
#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VB_SESS_VLD 0x02
-#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VB_SESS_VLD_SHIFT 1
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VB_SESS_VLD_SHIFT 0x01
#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VB_SESS_END 0x01
-#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VB_SESS_END_SHIFT 0
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VB_SESS_END_SHIFT 0x00
/* Bit definitions for USB_VBUS_INT_EN_HI_SET */
#define PALMAS_USB_VBUS_INT_EN_HI_SET_VOTG_SESS_VLD 0x80
-#define PALMAS_USB_VBUS_INT_EN_HI_SET_VOTG_SESS_VLD_SHIFT 7
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VOTG_SESS_VLD_SHIFT 0x07
#define PALMAS_USB_VBUS_INT_EN_HI_SET_VADP_PRB 0x40
-#define PALMAS_USB_VBUS_INT_EN_HI_SET_VADP_PRB_SHIFT 6
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VADP_PRB_SHIFT 0x06
#define PALMAS_USB_VBUS_INT_EN_HI_SET_VADP_SNS 0x20
-#define PALMAS_USB_VBUS_INT_EN_HI_SET_VADP_SNS_SHIFT 5
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VADP_SNS_SHIFT 0x05
#define PALMAS_USB_VBUS_INT_EN_HI_SET_ADP 0x10
-#define PALMAS_USB_VBUS_INT_EN_HI_SET_ADP_SHIFT 4
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_ADP_SHIFT 0x04
#define PALMAS_USB_VBUS_INT_EN_HI_SET_VA_VBUS_VLD 0x08
-#define PALMAS_USB_VBUS_INT_EN_HI_SET_VA_VBUS_VLD_SHIFT 3
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VA_VBUS_VLD_SHIFT 0x03
#define PALMAS_USB_VBUS_INT_EN_HI_SET_VA_SESS_VLD 0x04
-#define PALMAS_USB_VBUS_INT_EN_HI_SET_VA_SESS_VLD_SHIFT 2
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VA_SESS_VLD_SHIFT 0x02
#define PALMAS_USB_VBUS_INT_EN_HI_SET_VB_SESS_VLD 0x02
-#define PALMAS_USB_VBUS_INT_EN_HI_SET_VB_SESS_VLD_SHIFT 1
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VB_SESS_VLD_SHIFT 0x01
#define PALMAS_USB_VBUS_INT_EN_HI_SET_VB_SESS_END 0x01
-#define PALMAS_USB_VBUS_INT_EN_HI_SET_VB_SESS_END_SHIFT 0
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VB_SESS_END_SHIFT 0x00
/* Bit definitions for USB_VBUS_INT_EN_HI_CLR */
#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VOTG_SESS_VLD 0x80
-#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VOTG_SESS_VLD_SHIFT 7
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VOTG_SESS_VLD_SHIFT 0x07
#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VADP_PRB 0x40
-#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VADP_PRB_SHIFT 6
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VADP_PRB_SHIFT 0x06
#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VADP_SNS 0x20
-#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VADP_SNS_SHIFT 5
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VADP_SNS_SHIFT 0x05
#define PALMAS_USB_VBUS_INT_EN_HI_CLR_ADP 0x10
-#define PALMAS_USB_VBUS_INT_EN_HI_CLR_ADP_SHIFT 4
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_ADP_SHIFT 0x04
#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VA_VBUS_VLD 0x08
-#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VA_VBUS_VLD_SHIFT 3
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VA_VBUS_VLD_SHIFT 0x03
#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VA_SESS_VLD 0x04
-#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VA_SESS_VLD_SHIFT 2
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VA_SESS_VLD_SHIFT 0x02
#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VB_SESS_VLD 0x02
-#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VB_SESS_VLD_SHIFT 1
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VB_SESS_VLD_SHIFT 0x01
#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VB_SESS_END 0x01
-#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VB_SESS_END_SHIFT 0
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VB_SESS_END_SHIFT 0x00
/* Bit definitions for USB_ID_INT_SRC */
#define PALMAS_USB_ID_INT_SRC_ID_FLOAT 0x10
-#define PALMAS_USB_ID_INT_SRC_ID_FLOAT_SHIFT 4
+#define PALMAS_USB_ID_INT_SRC_ID_FLOAT_SHIFT 0x04
#define PALMAS_USB_ID_INT_SRC_ID_A 0x08
-#define PALMAS_USB_ID_INT_SRC_ID_A_SHIFT 3
+#define PALMAS_USB_ID_INT_SRC_ID_A_SHIFT 0x03
#define PALMAS_USB_ID_INT_SRC_ID_B 0x04
-#define PALMAS_USB_ID_INT_SRC_ID_B_SHIFT 2
+#define PALMAS_USB_ID_INT_SRC_ID_B_SHIFT 0x02
#define PALMAS_USB_ID_INT_SRC_ID_C 0x02
-#define PALMAS_USB_ID_INT_SRC_ID_C_SHIFT 1
+#define PALMAS_USB_ID_INT_SRC_ID_C_SHIFT 0x01
#define PALMAS_USB_ID_INT_SRC_ID_GND 0x01
-#define PALMAS_USB_ID_INT_SRC_ID_GND_SHIFT 0
+#define PALMAS_USB_ID_INT_SRC_ID_GND_SHIFT 0x00
/* Bit definitions for USB_ID_INT_LATCH_SET */
#define PALMAS_USB_ID_INT_LATCH_SET_ID_FLOAT 0x10
-#define PALMAS_USB_ID_INT_LATCH_SET_ID_FLOAT_SHIFT 4
+#define PALMAS_USB_ID_INT_LATCH_SET_ID_FLOAT_SHIFT 0x04
#define PALMAS_USB_ID_INT_LATCH_SET_ID_A 0x08
-#define PALMAS_USB_ID_INT_LATCH_SET_ID_A_SHIFT 3
+#define PALMAS_USB_ID_INT_LATCH_SET_ID_A_SHIFT 0x03
#define PALMAS_USB_ID_INT_LATCH_SET_ID_B 0x04
-#define PALMAS_USB_ID_INT_LATCH_SET_ID_B_SHIFT 2
+#define PALMAS_USB_ID_INT_LATCH_SET_ID_B_SHIFT 0x02
#define PALMAS_USB_ID_INT_LATCH_SET_ID_C 0x02
-#define PALMAS_USB_ID_INT_LATCH_SET_ID_C_SHIFT 1
+#define PALMAS_USB_ID_INT_LATCH_SET_ID_C_SHIFT 0x01
#define PALMAS_USB_ID_INT_LATCH_SET_ID_GND 0x01
-#define PALMAS_USB_ID_INT_LATCH_SET_ID_GND_SHIFT 0
+#define PALMAS_USB_ID_INT_LATCH_SET_ID_GND_SHIFT 0x00
/* Bit definitions for USB_ID_INT_LATCH_CLR */
#define PALMAS_USB_ID_INT_LATCH_CLR_ID_FLOAT 0x10
-#define PALMAS_USB_ID_INT_LATCH_CLR_ID_FLOAT_SHIFT 4
+#define PALMAS_USB_ID_INT_LATCH_CLR_ID_FLOAT_SHIFT 0x04
#define PALMAS_USB_ID_INT_LATCH_CLR_ID_A 0x08
-#define PALMAS_USB_ID_INT_LATCH_CLR_ID_A_SHIFT 3
+#define PALMAS_USB_ID_INT_LATCH_CLR_ID_A_SHIFT 0x03
#define PALMAS_USB_ID_INT_LATCH_CLR_ID_B 0x04
-#define PALMAS_USB_ID_INT_LATCH_CLR_ID_B_SHIFT 2
+#define PALMAS_USB_ID_INT_LATCH_CLR_ID_B_SHIFT 0x02
#define PALMAS_USB_ID_INT_LATCH_CLR_ID_C 0x02
-#define PALMAS_USB_ID_INT_LATCH_CLR_ID_C_SHIFT 1
+#define PALMAS_USB_ID_INT_LATCH_CLR_ID_C_SHIFT 0x01
#define PALMAS_USB_ID_INT_LATCH_CLR_ID_GND 0x01
-#define PALMAS_USB_ID_INT_LATCH_CLR_ID_GND_SHIFT 0
+#define PALMAS_USB_ID_INT_LATCH_CLR_ID_GND_SHIFT 0x00
/* Bit definitions for USB_ID_INT_EN_LO_SET */
#define PALMAS_USB_ID_INT_EN_LO_SET_ID_FLOAT 0x10
-#define PALMAS_USB_ID_INT_EN_LO_SET_ID_FLOAT_SHIFT 4
+#define PALMAS_USB_ID_INT_EN_LO_SET_ID_FLOAT_SHIFT 0x04
#define PALMAS_USB_ID_INT_EN_LO_SET_ID_A 0x08
-#define PALMAS_USB_ID_INT_EN_LO_SET_ID_A_SHIFT 3
+#define PALMAS_USB_ID_INT_EN_LO_SET_ID_A_SHIFT 0x03
#define PALMAS_USB_ID_INT_EN_LO_SET_ID_B 0x04
-#define PALMAS_USB_ID_INT_EN_LO_SET_ID_B_SHIFT 2
+#define PALMAS_USB_ID_INT_EN_LO_SET_ID_B_SHIFT 0x02
#define PALMAS_USB_ID_INT_EN_LO_SET_ID_C 0x02
-#define PALMAS_USB_ID_INT_EN_LO_SET_ID_C_SHIFT 1
+#define PALMAS_USB_ID_INT_EN_LO_SET_ID_C_SHIFT 0x01
#define PALMAS_USB_ID_INT_EN_LO_SET_ID_GND 0x01
-#define PALMAS_USB_ID_INT_EN_LO_SET_ID_GND_SHIFT 0
+#define PALMAS_USB_ID_INT_EN_LO_SET_ID_GND_SHIFT 0x00
/* Bit definitions for USB_ID_INT_EN_LO_CLR */
#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_FLOAT 0x10
-#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_FLOAT_SHIFT 4
+#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_FLOAT_SHIFT 0x04
#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_A 0x08
-#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_A_SHIFT 3
+#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_A_SHIFT 0x03
#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_B 0x04
-#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_B_SHIFT 2
+#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_B_SHIFT 0x02
#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_C 0x02
-#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_C_SHIFT 1
+#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_C_SHIFT 0x01
#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_GND 0x01
-#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_GND_SHIFT 0
+#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_GND_SHIFT 0x00
/* Bit definitions for USB_ID_INT_EN_HI_SET */
#define PALMAS_USB_ID_INT_EN_HI_SET_ID_FLOAT 0x10
-#define PALMAS_USB_ID_INT_EN_HI_SET_ID_FLOAT_SHIFT 4
+#define PALMAS_USB_ID_INT_EN_HI_SET_ID_FLOAT_SHIFT 0x04
#define PALMAS_USB_ID_INT_EN_HI_SET_ID_A 0x08
-#define PALMAS_USB_ID_INT_EN_HI_SET_ID_A_SHIFT 3
+#define PALMAS_USB_ID_INT_EN_HI_SET_ID_A_SHIFT 0x03
#define PALMAS_USB_ID_INT_EN_HI_SET_ID_B 0x04
-#define PALMAS_USB_ID_INT_EN_HI_SET_ID_B_SHIFT 2
+#define PALMAS_USB_ID_INT_EN_HI_SET_ID_B_SHIFT 0x02
#define PALMAS_USB_ID_INT_EN_HI_SET_ID_C 0x02
-#define PALMAS_USB_ID_INT_EN_HI_SET_ID_C_SHIFT 1
+#define PALMAS_USB_ID_INT_EN_HI_SET_ID_C_SHIFT 0x01
#define PALMAS_USB_ID_INT_EN_HI_SET_ID_GND 0x01
-#define PALMAS_USB_ID_INT_EN_HI_SET_ID_GND_SHIFT 0
+#define PALMAS_USB_ID_INT_EN_HI_SET_ID_GND_SHIFT 0x00
/* Bit definitions for USB_ID_INT_EN_HI_CLR */
#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT 0x10
-#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT_SHIFT 4
+#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT_SHIFT 0x04
#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_A 0x08
-#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_A_SHIFT 3
+#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_A_SHIFT 0x03
#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_B 0x04
-#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_B_SHIFT 2
+#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_B_SHIFT 0x02
#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_C 0x02
-#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_C_SHIFT 1
+#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_C_SHIFT 0x01
#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND 0x01
-#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND_SHIFT 0
+#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND_SHIFT 0x00
/* Bit definitions for USB_OTG_ADP_CTRL */
#define PALMAS_USB_OTG_ADP_CTRL_ADP_EN 0x04
-#define PALMAS_USB_OTG_ADP_CTRL_ADP_EN_SHIFT 2
+#define PALMAS_USB_OTG_ADP_CTRL_ADP_EN_SHIFT 0x02
#define PALMAS_USB_OTG_ADP_CTRL_ADP_MODE_MASK 0x03
-#define PALMAS_USB_OTG_ADP_CTRL_ADP_MODE_SHIFT 0
+#define PALMAS_USB_OTG_ADP_CTRL_ADP_MODE_SHIFT 0x00
/* Bit definitions for USB_OTG_ADP_HIGH */
-#define PALMAS_USB_OTG_ADP_HIGH_T_ADP_HIGH_MASK 0xff
-#define PALMAS_USB_OTG_ADP_HIGH_T_ADP_HIGH_SHIFT 0
+#define PALMAS_USB_OTG_ADP_HIGH_T_ADP_HIGH_MASK 0xFF
+#define PALMAS_USB_OTG_ADP_HIGH_T_ADP_HIGH_SHIFT 0x00
/* Bit definitions for USB_OTG_ADP_LOW */
-#define PALMAS_USB_OTG_ADP_LOW_T_ADP_LOW_MASK 0xff
-#define PALMAS_USB_OTG_ADP_LOW_T_ADP_LOW_SHIFT 0
+#define PALMAS_USB_OTG_ADP_LOW_T_ADP_LOW_MASK 0xFF
+#define PALMAS_USB_OTG_ADP_LOW_T_ADP_LOW_SHIFT 0x00
/* Bit definitions for USB_OTG_ADP_RISE */
-#define PALMAS_USB_OTG_ADP_RISE_T_ADP_RISE_MASK 0xff
-#define PALMAS_USB_OTG_ADP_RISE_T_ADP_RISE_SHIFT 0
+#define PALMAS_USB_OTG_ADP_RISE_T_ADP_RISE_MASK 0xFF
+#define PALMAS_USB_OTG_ADP_RISE_T_ADP_RISE_SHIFT 0x00
/* Bit definitions for USB_OTG_REVISION */
#define PALMAS_USB_OTG_REVISION_OTG_REV 0x01
-#define PALMAS_USB_OTG_REVISION_OTG_REV_SHIFT 0
+#define PALMAS_USB_OTG_REVISION_OTG_REV_SHIFT 0x00
/* Registers for function VIBRATOR */
-#define PALMAS_VIBRA_CTRL 0x0
+#define PALMAS_VIBRA_CTRL 0x00
/* Bit definitions for VIBRA_CTRL */
#define PALMAS_VIBRA_CTRL_PWM_DUTY_SEL_MASK 0x06
-#define PALMAS_VIBRA_CTRL_PWM_DUTY_SEL_SHIFT 1
+#define PALMAS_VIBRA_CTRL_PWM_DUTY_SEL_SHIFT 0x01
#define PALMAS_VIBRA_CTRL_PWM_FREQ_SEL 0x01
-#define PALMAS_VIBRA_CTRL_PWM_FREQ_SEL_SHIFT 0
+#define PALMAS_VIBRA_CTRL_PWM_FREQ_SEL_SHIFT 0x00
/* Registers for function GPIO */
-#define PALMAS_GPIO_DATA_IN 0x0
-#define PALMAS_GPIO_DATA_DIR 0x1
-#define PALMAS_GPIO_DATA_OUT 0x2
-#define PALMAS_GPIO_DEBOUNCE_EN 0x3
-#define PALMAS_GPIO_CLEAR_DATA_OUT 0x4
-#define PALMAS_GPIO_SET_DATA_OUT 0x5
-#define PALMAS_PU_PD_GPIO_CTRL1 0x6
-#define PALMAS_PU_PD_GPIO_CTRL2 0x7
-#define PALMAS_OD_OUTPUT_GPIO_CTRL 0x8
-#define PALMAS_GPIO_DATA_IN2 0x9
+#define PALMAS_GPIO_DATA_IN 0x00
+#define PALMAS_GPIO_DATA_DIR 0x01
+#define PALMAS_GPIO_DATA_OUT 0x02
+#define PALMAS_GPIO_DEBOUNCE_EN 0x03
+#define PALMAS_GPIO_CLEAR_DATA_OUT 0x04
+#define PALMAS_GPIO_SET_DATA_OUT 0x05
+#define PALMAS_PU_PD_GPIO_CTRL1 0x06
+#define PALMAS_PU_PD_GPIO_CTRL2 0x07
+#define PALMAS_OD_OUTPUT_GPIO_CTRL 0x08
+#define PALMAS_GPIO_DATA_IN2 0x09
#define PALMAS_GPIO_DATA_DIR2 0x0A
#define PALMAS_GPIO_DATA_OUT2 0x0B
#define PALMAS_GPIO_DEBOUNCE_EN2 0x0C
@@ -2561,167 +2561,167 @@ enum usb_irq_events {
/* Bit definitions for GPIO_DATA_IN */
#define PALMAS_GPIO_DATA_IN_GPIO_7_IN 0x80
-#define PALMAS_GPIO_DATA_IN_GPIO_7_IN_SHIFT 7
+#define PALMAS_GPIO_DATA_IN_GPIO_7_IN_SHIFT 0x07
#define PALMAS_GPIO_DATA_IN_GPIO_6_IN 0x40
-#define PALMAS_GPIO_DATA_IN_GPIO_6_IN_SHIFT 6
+#define PALMAS_GPIO_DATA_IN_GPIO_6_IN_SHIFT 0x06
#define PALMAS_GPIO_DATA_IN_GPIO_5_IN 0x20
-#define PALMAS_GPIO_DATA_IN_GPIO_5_IN_SHIFT 5
+#define PALMAS_GPIO_DATA_IN_GPIO_5_IN_SHIFT 0x05
#define PALMAS_GPIO_DATA_IN_GPIO_4_IN 0x10
-#define PALMAS_GPIO_DATA_IN_GPIO_4_IN_SHIFT 4
+#define PALMAS_GPIO_DATA_IN_GPIO_4_IN_SHIFT 0x04
#define PALMAS_GPIO_DATA_IN_GPIO_3_IN 0x08
-#define PALMAS_GPIO_DATA_IN_GPIO_3_IN_SHIFT 3
+#define PALMAS_GPIO_DATA_IN_GPIO_3_IN_SHIFT 0x03
#define PALMAS_GPIO_DATA_IN_GPIO_2_IN 0x04
-#define PALMAS_GPIO_DATA_IN_GPIO_2_IN_SHIFT 2
+#define PALMAS_GPIO_DATA_IN_GPIO_2_IN_SHIFT 0x02
#define PALMAS_GPIO_DATA_IN_GPIO_1_IN 0x02
-#define PALMAS_GPIO_DATA_IN_GPIO_1_IN_SHIFT 1
+#define PALMAS_GPIO_DATA_IN_GPIO_1_IN_SHIFT 0x01
#define PALMAS_GPIO_DATA_IN_GPIO_0_IN 0x01
-#define PALMAS_GPIO_DATA_IN_GPIO_0_IN_SHIFT 0
+#define PALMAS_GPIO_DATA_IN_GPIO_0_IN_SHIFT 0x00
/* Bit definitions for GPIO_DATA_DIR */
#define PALMAS_GPIO_DATA_DIR_GPIO_7_DIR 0x80
-#define PALMAS_GPIO_DATA_DIR_GPIO_7_DIR_SHIFT 7
+#define PALMAS_GPIO_DATA_DIR_GPIO_7_DIR_SHIFT 0x07
#define PALMAS_GPIO_DATA_DIR_GPIO_6_DIR 0x40
-#define PALMAS_GPIO_DATA_DIR_GPIO_6_DIR_SHIFT 6
+#define PALMAS_GPIO_DATA_DIR_GPIO_6_DIR_SHIFT 0x06
#define PALMAS_GPIO_DATA_DIR_GPIO_5_DIR 0x20
-#define PALMAS_GPIO_DATA_DIR_GPIO_5_DIR_SHIFT 5
+#define PALMAS_GPIO_DATA_DIR_GPIO_5_DIR_SHIFT 0x05
#define PALMAS_GPIO_DATA_DIR_GPIO_4_DIR 0x10
-#define PALMAS_GPIO_DATA_DIR_GPIO_4_DIR_SHIFT 4
+#define PALMAS_GPIO_DATA_DIR_GPIO_4_DIR_SHIFT 0x04
#define PALMAS_GPIO_DATA_DIR_GPIO_3_DIR 0x08
-#define PALMAS_GPIO_DATA_DIR_GPIO_3_DIR_SHIFT 3
+#define PALMAS_GPIO_DATA_DIR_GPIO_3_DIR_SHIFT 0x03
#define PALMAS_GPIO_DATA_DIR_GPIO_2_DIR 0x04
-#define PALMAS_GPIO_DATA_DIR_GPIO_2_DIR_SHIFT 2
+#define PALMAS_GPIO_DATA_DIR_GPIO_2_DIR_SHIFT 0x02
#define PALMAS_GPIO_DATA_DIR_GPIO_1_DIR 0x02
-#define PALMAS_GPIO_DATA_DIR_GPIO_1_DIR_SHIFT 1
+#define PALMAS_GPIO_DATA_DIR_GPIO_1_DIR_SHIFT 0x01
#define PALMAS_GPIO_DATA_DIR_GPIO_0_DIR 0x01
-#define PALMAS_GPIO_DATA_DIR_GPIO_0_DIR_SHIFT 0
+#define PALMAS_GPIO_DATA_DIR_GPIO_0_DIR_SHIFT 0x00
/* Bit definitions for GPIO_DATA_OUT */
#define PALMAS_GPIO_DATA_OUT_GPIO_7_OUT 0x80
-#define PALMAS_GPIO_DATA_OUT_GPIO_7_OUT_SHIFT 7
+#define PALMAS_GPIO_DATA_OUT_GPIO_7_OUT_SHIFT 0x07
#define PALMAS_GPIO_DATA_OUT_GPIO_6_OUT 0x40
-#define PALMAS_GPIO_DATA_OUT_GPIO_6_OUT_SHIFT 6
+#define PALMAS_GPIO_DATA_OUT_GPIO_6_OUT_SHIFT 0x06
#define PALMAS_GPIO_DATA_OUT_GPIO_5_OUT 0x20
-#define PALMAS_GPIO_DATA_OUT_GPIO_5_OUT_SHIFT 5
+#define PALMAS_GPIO_DATA_OUT_GPIO_5_OUT_SHIFT 0x05
#define PALMAS_GPIO_DATA_OUT_GPIO_4_OUT 0x10
-#define PALMAS_GPIO_DATA_OUT_GPIO_4_OUT_SHIFT 4
+#define PALMAS_GPIO_DATA_OUT_GPIO_4_OUT_SHIFT 0x04
#define PALMAS_GPIO_DATA_OUT_GPIO_3_OUT 0x08
-#define PALMAS_GPIO_DATA_OUT_GPIO_3_OUT_SHIFT 3
+#define PALMAS_GPIO_DATA_OUT_GPIO_3_OUT_SHIFT 0x03
#define PALMAS_GPIO_DATA_OUT_GPIO_2_OUT 0x04
-#define PALMAS_GPIO_DATA_OUT_GPIO_2_OUT_SHIFT 2
+#define PALMAS_GPIO_DATA_OUT_GPIO_2_OUT_SHIFT 0x02
#define PALMAS_GPIO_DATA_OUT_GPIO_1_OUT 0x02
-#define PALMAS_GPIO_DATA_OUT_GPIO_1_OUT_SHIFT 1
+#define PALMAS_GPIO_DATA_OUT_GPIO_1_OUT_SHIFT 0x01
#define PALMAS_GPIO_DATA_OUT_GPIO_0_OUT 0x01
-#define PALMAS_GPIO_DATA_OUT_GPIO_0_OUT_SHIFT 0
+#define PALMAS_GPIO_DATA_OUT_GPIO_0_OUT_SHIFT 0x00
/* Bit definitions for GPIO_DEBOUNCE_EN */
#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_7_DEBOUNCE_EN 0x80
-#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_7_DEBOUNCE_EN_SHIFT 7
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_7_DEBOUNCE_EN_SHIFT 0x07
#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_6_DEBOUNCE_EN 0x40
-#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_6_DEBOUNCE_EN_SHIFT 6
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_6_DEBOUNCE_EN_SHIFT 0x06
#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_5_DEBOUNCE_EN 0x20
-#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_5_DEBOUNCE_EN_SHIFT 5
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_5_DEBOUNCE_EN_SHIFT 0x05
#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_4_DEBOUNCE_EN 0x10
-#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_4_DEBOUNCE_EN_SHIFT 4
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_4_DEBOUNCE_EN_SHIFT 0x04
#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_3_DEBOUNCE_EN 0x08
-#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_3_DEBOUNCE_EN_SHIFT 3
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_3_DEBOUNCE_EN_SHIFT 0x03
#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_2_DEBOUNCE_EN 0x04
-#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_2_DEBOUNCE_EN_SHIFT 2
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_2_DEBOUNCE_EN_SHIFT 0x02
#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_1_DEBOUNCE_EN 0x02
-#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_1_DEBOUNCE_EN_SHIFT 1
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_1_DEBOUNCE_EN_SHIFT 0x01
#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_0_DEBOUNCE_EN 0x01
-#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_0_DEBOUNCE_EN_SHIFT 0
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_0_DEBOUNCE_EN_SHIFT 0x00
/* Bit definitions for GPIO_CLEAR_DATA_OUT */
#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_7_CLEAR_DATA_OUT 0x80
-#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_7_CLEAR_DATA_OUT_SHIFT 7
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_7_CLEAR_DATA_OUT_SHIFT 0x07
#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_6_CLEAR_DATA_OUT 0x40
-#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_6_CLEAR_DATA_OUT_SHIFT 6
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_6_CLEAR_DATA_OUT_SHIFT 0x06
#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_5_CLEAR_DATA_OUT 0x20
-#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_5_CLEAR_DATA_OUT_SHIFT 5
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_5_CLEAR_DATA_OUT_SHIFT 0x05
#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_4_CLEAR_DATA_OUT 0x10
-#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_4_CLEAR_DATA_OUT_SHIFT 4
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_4_CLEAR_DATA_OUT_SHIFT 0x04
#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_3_CLEAR_DATA_OUT 0x08
-#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_3_CLEAR_DATA_OUT_SHIFT 3
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_3_CLEAR_DATA_OUT_SHIFT 0x03
#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_2_CLEAR_DATA_OUT 0x04
-#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_2_CLEAR_DATA_OUT_SHIFT 2
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_2_CLEAR_DATA_OUT_SHIFT 0x02
#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_1_CLEAR_DATA_OUT 0x02
-#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_1_CLEAR_DATA_OUT_SHIFT 1
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_1_CLEAR_DATA_OUT_SHIFT 0x01
#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_0_CLEAR_DATA_OUT 0x01
-#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_0_CLEAR_DATA_OUT_SHIFT 0
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_0_CLEAR_DATA_OUT_SHIFT 0x00
/* Bit definitions for GPIO_SET_DATA_OUT */
#define PALMAS_GPIO_SET_DATA_OUT_GPIO_7_SET_DATA_OUT 0x80
-#define PALMAS_GPIO_SET_DATA_OUT_GPIO_7_SET_DATA_OUT_SHIFT 7
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_7_SET_DATA_OUT_SHIFT 0x07
#define PALMAS_GPIO_SET_DATA_OUT_GPIO_6_SET_DATA_OUT 0x40
-#define PALMAS_GPIO_SET_DATA_OUT_GPIO_6_SET_DATA_OUT_SHIFT 6
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_6_SET_DATA_OUT_SHIFT 0x06
#define PALMAS_GPIO_SET_DATA_OUT_GPIO_5_SET_DATA_OUT 0x20
-#define PALMAS_GPIO_SET_DATA_OUT_GPIO_5_SET_DATA_OUT_SHIFT 5
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_5_SET_DATA_OUT_SHIFT 0x05
#define PALMAS_GPIO_SET_DATA_OUT_GPIO_4_SET_DATA_OUT 0x10
-#define PALMAS_GPIO_SET_DATA_OUT_GPIO_4_SET_DATA_OUT_SHIFT 4
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_4_SET_DATA_OUT_SHIFT 0x04
#define PALMAS_GPIO_SET_DATA_OUT_GPIO_3_SET_DATA_OUT 0x08
-#define PALMAS_GPIO_SET_DATA_OUT_GPIO_3_SET_DATA_OUT_SHIFT 3
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_3_SET_DATA_OUT_SHIFT 0x03
#define PALMAS_GPIO_SET_DATA_OUT_GPIO_2_SET_DATA_OUT 0x04
-#define PALMAS_GPIO_SET_DATA_OUT_GPIO_2_SET_DATA_OUT_SHIFT 2
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_2_SET_DATA_OUT_SHIFT 0x02
#define PALMAS_GPIO_SET_DATA_OUT_GPIO_1_SET_DATA_OUT 0x02
-#define PALMAS_GPIO_SET_DATA_OUT_GPIO_1_SET_DATA_OUT_SHIFT 1
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_1_SET_DATA_OUT_SHIFT 0x01
#define PALMAS_GPIO_SET_DATA_OUT_GPIO_0_SET_DATA_OUT 0x01
-#define PALMAS_GPIO_SET_DATA_OUT_GPIO_0_SET_DATA_OUT_SHIFT 0
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_0_SET_DATA_OUT_SHIFT 0x00
/* Bit definitions for PU_PD_GPIO_CTRL1 */
#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_3_PD 0x40
-#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_3_PD_SHIFT 6
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_3_PD_SHIFT 0x06
#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_2_PU 0x20
-#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_2_PU_SHIFT 5
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_2_PU_SHIFT 0x05
#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_2_PD 0x10
-#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_2_PD_SHIFT 4
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_2_PD_SHIFT 0x04
#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_1_PU 0x08
-#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_1_PU_SHIFT 3
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_1_PU_SHIFT 0x03
#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_1_PD 0x04
-#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_1_PD_SHIFT 2
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_1_PD_SHIFT 0x02
#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_0_PD 0x01
-#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_0_PD_SHIFT 0
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_0_PD_SHIFT 0x00
/* Bit definitions for PU_PD_GPIO_CTRL2 */
#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_7_PD 0x40
-#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_7_PD_SHIFT 6
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_7_PD_SHIFT 0x06
#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_6_PU 0x20
-#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_6_PU_SHIFT 5
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_6_PU_SHIFT 0x05
#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_6_PD 0x10
-#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_6_PD_SHIFT 4
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_6_PD_SHIFT 0x04
#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_5_PU 0x08
-#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_5_PU_SHIFT 3
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_5_PU_SHIFT 0x03
#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_5_PD 0x04
-#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_5_PD_SHIFT 2
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_5_PD_SHIFT 0x02
#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_4_PU 0x02
-#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_4_PU_SHIFT 1
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_4_PU_SHIFT 0x01
#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_4_PD 0x01
-#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_4_PD_SHIFT 0
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_4_PD_SHIFT 0x00
/* Bit definitions for OD_OUTPUT_GPIO_CTRL */
#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_5_OD 0x20
-#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_5_OD_SHIFT 5
+#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_5_OD_SHIFT 0x05
#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_2_OD 0x04
-#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_2_OD_SHIFT 2
+#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_2_OD_SHIFT 0x02
#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_1_OD 0x02
-#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_1_OD_SHIFT 1
+#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_1_OD_SHIFT 0x01
/* Registers for function GPADC */
-#define PALMAS_GPADC_CTRL1 0x0
-#define PALMAS_GPADC_CTRL2 0x1
-#define PALMAS_GPADC_RT_CTRL 0x2
-#define PALMAS_GPADC_AUTO_CTRL 0x3
-#define PALMAS_GPADC_STATUS 0x4
-#define PALMAS_GPADC_RT_SELECT 0x5
-#define PALMAS_GPADC_RT_CONV0_LSB 0x6
-#define PALMAS_GPADC_RT_CONV0_MSB 0x7
-#define PALMAS_GPADC_AUTO_SELECT 0x8
-#define PALMAS_GPADC_AUTO_CONV0_LSB 0x9
-#define PALMAS_GPADC_AUTO_CONV0_MSB 0xA
-#define PALMAS_GPADC_AUTO_CONV1_LSB 0xB
-#define PALMAS_GPADC_AUTO_CONV1_MSB 0xC
-#define PALMAS_GPADC_SW_SELECT 0xD
-#define PALMAS_GPADC_SW_CONV0_LSB 0xE
-#define PALMAS_GPADC_SW_CONV0_MSB 0xF
+#define PALMAS_GPADC_CTRL1 0x00
+#define PALMAS_GPADC_CTRL2 0x01
+#define PALMAS_GPADC_RT_CTRL 0x02
+#define PALMAS_GPADC_AUTO_CTRL 0x03
+#define PALMAS_GPADC_STATUS 0x04
+#define PALMAS_GPADC_RT_SELECT 0x05
+#define PALMAS_GPADC_RT_CONV0_LSB 0x06
+#define PALMAS_GPADC_RT_CONV0_MSB 0x07
+#define PALMAS_GPADC_AUTO_SELECT 0x08
+#define PALMAS_GPADC_AUTO_CONV0_LSB 0x09
+#define PALMAS_GPADC_AUTO_CONV0_MSB 0x0A
+#define PALMAS_GPADC_AUTO_CONV1_LSB 0x0B
+#define PALMAS_GPADC_AUTO_CONV1_MSB 0x0C
+#define PALMAS_GPADC_SW_SELECT 0x0D
+#define PALMAS_GPADC_SW_CONV0_LSB 0x0E
+#define PALMAS_GPADC_SW_CONV0_MSB 0x0F
#define PALMAS_GPADC_THRES_CONV0_LSB 0x10
#define PALMAS_GPADC_THRES_CONV0_MSB 0x11
#define PALMAS_GPADC_THRES_CONV1_LSB 0x12
@@ -2731,150 +2731,150 @@ enum usb_irq_events {
/* Bit definitions for GPADC_CTRL1 */
#define PALMAS_GPADC_CTRL1_RESERVED_MASK 0xc0
-#define PALMAS_GPADC_CTRL1_RESERVED_SHIFT 6
+#define PALMAS_GPADC_CTRL1_RESERVED_SHIFT 0x06
#define PALMAS_GPADC_CTRL1_CURRENT_SRC_CH3_MASK 0x30
-#define PALMAS_GPADC_CTRL1_CURRENT_SRC_CH3_SHIFT 4
+#define PALMAS_GPADC_CTRL1_CURRENT_SRC_CH3_SHIFT 0x04
#define PALMAS_GPADC_CTRL1_CURRENT_SRC_CH0_MASK 0x0c
-#define PALMAS_GPADC_CTRL1_CURRENT_SRC_CH0_SHIFT 2
+#define PALMAS_GPADC_CTRL1_CURRENT_SRC_CH0_SHIFT 0x02
#define PALMAS_GPADC_CTRL1_BAT_REMOVAL_DET 0x02
-#define PALMAS_GPADC_CTRL1_BAT_REMOVAL_DET_SHIFT 1
+#define PALMAS_GPADC_CTRL1_BAT_REMOVAL_DET_SHIFT 0x01
#define PALMAS_GPADC_CTRL1_GPADC_FORCE 0x01
-#define PALMAS_GPADC_CTRL1_GPADC_FORCE_SHIFT 0
+#define PALMAS_GPADC_CTRL1_GPADC_FORCE_SHIFT 0x00
/* Bit definitions for GPADC_CTRL2 */
#define PALMAS_GPADC_CTRL2_RESERVED_MASK 0x06
-#define PALMAS_GPADC_CTRL2_RESERVED_SHIFT 1
+#define PALMAS_GPADC_CTRL2_RESERVED_SHIFT 0x01
/* Bit definitions for GPADC_RT_CTRL */
#define PALMAS_GPADC_RT_CTRL_EXTEND_DELAY 0x02
-#define PALMAS_GPADC_RT_CTRL_EXTEND_DELAY_SHIFT 1
+#define PALMAS_GPADC_RT_CTRL_EXTEND_DELAY_SHIFT 0x01
#define PALMAS_GPADC_RT_CTRL_START_POLARITY 0x01
-#define PALMAS_GPADC_RT_CTRL_START_POLARITY_SHIFT 0
+#define PALMAS_GPADC_RT_CTRL_START_POLARITY_SHIFT 0x00
/* Bit definitions for GPADC_AUTO_CTRL */
#define PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV1 0x80
-#define PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV1_SHIFT 7
+#define PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV1_SHIFT 0x07
#define PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV0 0x40
-#define PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV0_SHIFT 6
+#define PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV0_SHIFT 0x06
#define PALMAS_GPADC_AUTO_CTRL_AUTO_CONV1_EN 0x20
-#define PALMAS_GPADC_AUTO_CTRL_AUTO_CONV1_EN_SHIFT 5
+#define PALMAS_GPADC_AUTO_CTRL_AUTO_CONV1_EN_SHIFT 0x05
#define PALMAS_GPADC_AUTO_CTRL_AUTO_CONV0_EN 0x10
-#define PALMAS_GPADC_AUTO_CTRL_AUTO_CONV0_EN_SHIFT 4
-#define PALMAS_GPADC_AUTO_CTRL_COUNTER_CONV_MASK 0x0f
-#define PALMAS_GPADC_AUTO_CTRL_COUNTER_CONV_SHIFT 0
+#define PALMAS_GPADC_AUTO_CTRL_AUTO_CONV0_EN_SHIFT 0x04
+#define PALMAS_GPADC_AUTO_CTRL_COUNTER_CONV_MASK 0x0F
+#define PALMAS_GPADC_AUTO_CTRL_COUNTER_CONV_SHIFT 0x00
/* Bit definitions for GPADC_STATUS */
#define PALMAS_GPADC_STATUS_GPADC_AVAILABLE 0x10
-#define PALMAS_GPADC_STATUS_GPADC_AVAILABLE_SHIFT 4
+#define PALMAS_GPADC_STATUS_GPADC_AVAILABLE_SHIFT 0x04
/* Bit definitions for GPADC_RT_SELECT */
#define PALMAS_GPADC_RT_SELECT_RT_CONV_EN 0x80
-#define PALMAS_GPADC_RT_SELECT_RT_CONV_EN_SHIFT 7
-#define PALMAS_GPADC_RT_SELECT_RT_CONV0_SEL_MASK 0x0f
-#define PALMAS_GPADC_RT_SELECT_RT_CONV0_SEL_SHIFT 0
+#define PALMAS_GPADC_RT_SELECT_RT_CONV_EN_SHIFT 0x07
+#define PALMAS_GPADC_RT_SELECT_RT_CONV0_SEL_MASK 0x0F
+#define PALMAS_GPADC_RT_SELECT_RT_CONV0_SEL_SHIFT 0x00
/* Bit definitions for GPADC_RT_CONV0_LSB */
-#define PALMAS_GPADC_RT_CONV0_LSB_RT_CONV0_LSB_MASK 0xff
-#define PALMAS_GPADC_RT_CONV0_LSB_RT_CONV0_LSB_SHIFT 0
+#define PALMAS_GPADC_RT_CONV0_LSB_RT_CONV0_LSB_MASK 0xFF
+#define PALMAS_GPADC_RT_CONV0_LSB_RT_CONV0_LSB_SHIFT 0x00
/* Bit definitions for GPADC_RT_CONV0_MSB */
-#define PALMAS_GPADC_RT_CONV0_MSB_RT_CONV0_MSB_MASK 0x0f
-#define PALMAS_GPADC_RT_CONV0_MSB_RT_CONV0_MSB_SHIFT 0
+#define PALMAS_GPADC_RT_CONV0_MSB_RT_CONV0_MSB_MASK 0x0F
+#define PALMAS_GPADC_RT_CONV0_MSB_RT_CONV0_MSB_SHIFT 0x00
/* Bit definitions for GPADC_AUTO_SELECT */
-#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV1_SEL_MASK 0xf0
-#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV1_SEL_SHIFT 4
-#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV0_SEL_MASK 0x0f
-#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV0_SEL_SHIFT 0
+#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV1_SEL_MASK 0xF0
+#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV1_SEL_SHIFT 0x04
+#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV0_SEL_MASK 0x0F
+#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV0_SEL_SHIFT 0x00
/* Bit definitions for GPADC_AUTO_CONV0_LSB */
-#define PALMAS_GPADC_AUTO_CONV0_LSB_AUTO_CONV0_LSB_MASK 0xff
-#define PALMAS_GPADC_AUTO_CONV0_LSB_AUTO_CONV0_LSB_SHIFT 0
+#define PALMAS_GPADC_AUTO_CONV0_LSB_AUTO_CONV0_LSB_MASK 0xFF
+#define PALMAS_GPADC_AUTO_CONV0_LSB_AUTO_CONV0_LSB_SHIFT 0x00
/* Bit definitions for GPADC_AUTO_CONV0_MSB */
-#define PALMAS_GPADC_AUTO_CONV0_MSB_AUTO_CONV0_MSB_MASK 0x0f
-#define PALMAS_GPADC_AUTO_CONV0_MSB_AUTO_CONV0_MSB_SHIFT 0
+#define PALMAS_GPADC_AUTO_CONV0_MSB_AUTO_CONV0_MSB_MASK 0x0F
+#define PALMAS_GPADC_AUTO_CONV0_MSB_AUTO_CONV0_MSB_SHIFT 0x00
/* Bit definitions for GPADC_AUTO_CONV1_LSB */
-#define PALMAS_GPADC_AUTO_CONV1_LSB_AUTO_CONV1_LSB_MASK 0xff
-#define PALMAS_GPADC_AUTO_CONV1_LSB_AUTO_CONV1_LSB_SHIFT 0
+#define PALMAS_GPADC_AUTO_CONV1_LSB_AUTO_CONV1_LSB_MASK 0xFF
+#define PALMAS_GPADC_AUTO_CONV1_LSB_AUTO_CONV1_LSB_SHIFT 0x00
/* Bit definitions for GPADC_AUTO_CONV1_MSB */
-#define PALMAS_GPADC_AUTO_CONV1_MSB_AUTO_CONV1_MSB_MASK 0x0f
-#define PALMAS_GPADC_AUTO_CONV1_MSB_AUTO_CONV1_MSB_SHIFT 0
+#define PALMAS_GPADC_AUTO_CONV1_MSB_AUTO_CONV1_MSB_MASK 0x0F
+#define PALMAS_GPADC_AUTO_CONV1_MSB_AUTO_CONV1_MSB_SHIFT 0x00
/* Bit definitions for GPADC_SW_SELECT */
#define PALMAS_GPADC_SW_SELECT_SW_CONV_EN 0x80
-#define PALMAS_GPADC_SW_SELECT_SW_CONV_EN_SHIFT 7
+#define PALMAS_GPADC_SW_SELECT_SW_CONV_EN_SHIFT 0x07
#define PALMAS_GPADC_SW_SELECT_SW_START_CONV0 0x10
-#define PALMAS_GPADC_SW_SELECT_SW_START_CONV0_SHIFT 4
-#define PALMAS_GPADC_SW_SELECT_SW_CONV0_SEL_MASK 0x0f
-#define PALMAS_GPADC_SW_SELECT_SW_CONV0_SEL_SHIFT 0
+#define PALMAS_GPADC_SW_SELECT_SW_START_CONV0_SHIFT 0x04
+#define PALMAS_GPADC_SW_SELECT_SW_CONV0_SEL_MASK 0x0F
+#define PALMAS_GPADC_SW_SELECT_SW_CONV0_SEL_SHIFT 0x00
/* Bit definitions for GPADC_SW_CONV0_LSB */
-#define PALMAS_GPADC_SW_CONV0_LSB_SW_CONV0_LSB_MASK 0xff
-#define PALMAS_GPADC_SW_CONV0_LSB_SW_CONV0_LSB_SHIFT 0
+#define PALMAS_GPADC_SW_CONV0_LSB_SW_CONV0_LSB_MASK 0xFF
+#define PALMAS_GPADC_SW_CONV0_LSB_SW_CONV0_LSB_SHIFT 0x00
/* Bit definitions for GPADC_SW_CONV0_MSB */
-#define PALMAS_GPADC_SW_CONV0_MSB_SW_CONV0_MSB_MASK 0x0f
-#define PALMAS_GPADC_SW_CONV0_MSB_SW_CONV0_MSB_SHIFT 0
+#define PALMAS_GPADC_SW_CONV0_MSB_SW_CONV0_MSB_MASK 0x0F
+#define PALMAS_GPADC_SW_CONV0_MSB_SW_CONV0_MSB_SHIFT 0x00
/* Bit definitions for GPADC_THRES_CONV0_LSB */
-#define PALMAS_GPADC_THRES_CONV0_LSB_THRES_CONV0_LSB_MASK 0xff
-#define PALMAS_GPADC_THRES_CONV0_LSB_THRES_CONV0_LSB_SHIFT 0
+#define PALMAS_GPADC_THRES_CONV0_LSB_THRES_CONV0_LSB_MASK 0xFF
+#define PALMAS_GPADC_THRES_CONV0_LSB_THRES_CONV0_LSB_SHIFT 0x00
/* Bit definitions for GPADC_THRES_CONV0_MSB */
#define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_POL 0x80
-#define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_POL_SHIFT 7
-#define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_MSB_MASK 0x0f
-#define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_MSB_SHIFT 0
+#define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_POL_SHIFT 0x07
+#define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_MSB_MASK 0x0F
+#define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_MSB_SHIFT 0x00
/* Bit definitions for GPADC_THRES_CONV1_LSB */
-#define PALMAS_GPADC_THRES_CONV1_LSB_THRES_CONV1_LSB_MASK 0xff
-#define PALMAS_GPADC_THRES_CONV1_LSB_THRES_CONV1_LSB_SHIFT 0
+#define PALMAS_GPADC_THRES_CONV1_LSB_THRES_CONV1_LSB_MASK 0xFF
+#define PALMAS_GPADC_THRES_CONV1_LSB_THRES_CONV1_LSB_SHIFT 0x00
/* Bit definitions for GPADC_THRES_CONV1_MSB */
#define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_POL 0x80
-#define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_POL_SHIFT 7
-#define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_MSB_MASK 0x0f
-#define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_MSB_SHIFT 0
+#define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_POL_SHIFT 0x07
+#define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_MSB_MASK 0x0F
+#define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_MSB_SHIFT 0x00
/* Bit definitions for GPADC_SMPS_ILMONITOR_EN */
#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_EN 0x20
-#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_EN_SHIFT 5
+#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_EN_SHIFT 0x05
#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_REXT 0x10
-#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_REXT_SHIFT 4
-#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_SEL_MASK 0x0f
-#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_SEL_SHIFT 0
+#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_REXT_SHIFT 0x04
+#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_SEL_MASK 0x0F
+#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_SEL_SHIFT 0x00
/* Bit definitions for GPADC_SMPS_VSEL_MONITORING */
#define PALMAS_GPADC_SMPS_VSEL_MONITORING_ACTIVE_PHASE 0x80
-#define PALMAS_GPADC_SMPS_VSEL_MONITORING_ACTIVE_PHASE_SHIFT 7
-#define PALMAS_GPADC_SMPS_VSEL_MONITORING_SMPS_VSEL_MONITORING_MASK 0x7f
-#define PALMAS_GPADC_SMPS_VSEL_MONITORING_SMPS_VSEL_MONITORING_SHIFT 0
+#define PALMAS_GPADC_SMPS_VSEL_MONITORING_ACTIVE_PHASE_SHIFT 0x07
+#define PALMAS_GPADC_SMPS_VSEL_MONITORING_SMPS_VSEL_MONITORING_MASK 0x7F
+#define PALMAS_GPADC_SMPS_VSEL_MONITORING_SMPS_VSEL_MONITORING_SHIFT 0x00
/* Registers for function GPADC */
-#define PALMAS_GPADC_TRIM1 0x0
-#define PALMAS_GPADC_TRIM2 0x1
-#define PALMAS_GPADC_TRIM3 0x2
-#define PALMAS_GPADC_TRIM4 0x3
-#define PALMAS_GPADC_TRIM5 0x4
-#define PALMAS_GPADC_TRIM6 0x5
-#define PALMAS_GPADC_TRIM7 0x6
-#define PALMAS_GPADC_TRIM8 0x7
-#define PALMAS_GPADC_TRIM9 0x8
-#define PALMAS_GPADC_TRIM10 0x9
-#define PALMAS_GPADC_TRIM11 0xA
-#define PALMAS_GPADC_TRIM12 0xB
-#define PALMAS_GPADC_TRIM13 0xC
-#define PALMAS_GPADC_TRIM14 0xD
-#define PALMAS_GPADC_TRIM15 0xE
-#define PALMAS_GPADC_TRIM16 0xF
+#define PALMAS_GPADC_TRIM1 0x00
+#define PALMAS_GPADC_TRIM2 0x01
+#define PALMAS_GPADC_TRIM3 0x02
+#define PALMAS_GPADC_TRIM4 0x03
+#define PALMAS_GPADC_TRIM5 0x04
+#define PALMAS_GPADC_TRIM6 0x05
+#define PALMAS_GPADC_TRIM7 0x06
+#define PALMAS_GPADC_TRIM8 0x07
+#define PALMAS_GPADC_TRIM9 0x08
+#define PALMAS_GPADC_TRIM10 0x09
+#define PALMAS_GPADC_TRIM11 0x0A
+#define PALMAS_GPADC_TRIM12 0x0B
+#define PALMAS_GPADC_TRIM13 0x0C
+#define PALMAS_GPADC_TRIM14 0x0D
+#define PALMAS_GPADC_TRIM15 0x0E
+#define PALMAS_GPADC_TRIM16 0x0F
static inline int palmas_read(struct palmas *palmas, unsigned int base,
unsigned int reg, unsigned int *val)
{
- unsigned int addr = PALMAS_BASE_TO_REG(base, reg);
+ unsigned int addr = PALMAS_BASE_TO_REG(base, reg);
int slave_id = PALMAS_BASE_TO_SLAVE(base);
return regmap_read(palmas->regmap[slave_id], addr, val);
diff --git a/include/linux/mfd/pm8xxx/core.h b/include/linux/mfd/pm8xxx/core.h
deleted file mode 100644
index bd2f4f64e931..000000000000
--- a/include/linux/mfd/pm8xxx/core.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-/*
- * Qualcomm PMIC 8xxx driver header file
- *
- */
-
-#ifndef __MFD_PM8XXX_CORE_H
-#define __MFD_PM8XXX_CORE_H
-
-#include <linux/mfd/core.h>
-
-struct pm8xxx_drvdata {
- int (*pmic_readb) (const struct device *dev, u16 addr, u8 *val);
- int (*pmic_writeb) (const struct device *dev, u16 addr, u8 val);
- int (*pmic_read_buf) (const struct device *dev, u16 addr, u8 *buf,
- int n);
- int (*pmic_write_buf) (const struct device *dev, u16 addr, u8 *buf,
- int n);
- int (*pmic_read_irq_stat) (const struct device *dev, int irq);
- void *pm_chip_data;
-};
-
-static inline int pm8xxx_readb(const struct device *dev, u16 addr, u8 *val)
-{
- struct pm8xxx_drvdata *dd = dev_get_drvdata(dev);
-
- if (!dd)
- return -EINVAL;
- return dd->pmic_readb(dev, addr, val);
-}
-
-static inline int pm8xxx_writeb(const struct device *dev, u16 addr, u8 val)
-{
- struct pm8xxx_drvdata *dd = dev_get_drvdata(dev);
-
- if (!dd)
- return -EINVAL;
- return dd->pmic_writeb(dev, addr, val);
-}
-
-static inline int pm8xxx_read_buf(const struct device *dev, u16 addr, u8 *buf,
- int n)
-{
- struct pm8xxx_drvdata *dd = dev_get_drvdata(dev);
-
- if (!dd)
- return -EINVAL;
- return dd->pmic_read_buf(dev, addr, buf, n);
-}
-
-static inline int pm8xxx_write_buf(const struct device *dev, u16 addr, u8 *buf,
- int n)
-{
- struct pm8xxx_drvdata *dd = dev_get_drvdata(dev);
-
- if (!dd)
- return -EINVAL;
- return dd->pmic_write_buf(dev, addr, buf, n);
-}
-
-static inline int pm8xxx_read_irq_stat(const struct device *dev, int irq)
-{
- struct pm8xxx_drvdata *dd = dev_get_drvdata(dev);
-
- if (!dd)
- return -EINVAL;
- return dd->pmic_read_irq_stat(dev, irq);
-}
-
-#endif
diff --git a/include/linux/mfd/rdc321x.h b/include/linux/mfd/rdc321x.h
index 4bdf19c8eedf..442743a8f915 100644
--- a/include/linux/mfd/rdc321x.h
+++ b/include/linux/mfd/rdc321x.h
@@ -12,7 +12,7 @@
#define RDC321X_GPIO_CTRL_REG2 0x84
#define RDC321X_GPIO_DATA_REG2 0x88
-#define RDC321X_MAX_GPIO 58
+#define RDC321X_NUM_GPIO 59
struct rdc321x_gpio_pdata {
struct pci_dev *sb_pdev;
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index 157e32b6ca28..47d84242940b 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -24,35 +24,36 @@ enum sec_device_type {
};
/**
- * struct sec_pmic_dev - s5m87xx master device for sub-drivers
- * @dev: master device of the chip (can be used to access platform data)
- * @pdata: pointer to private data used to pass platform data to child
- * @i2c: i2c client private data for regulator
- * @rtc: i2c client private data for rtc
- * @iolock: mutex for serializing io access
- * @irqlock: mutex for buslock
- * @irq_base: base IRQ number for sec-pmic, required for IRQs
- * @irq: generic IRQ number for s5m87xx
- * @ono: power onoff IRQ number for s5m87xx
- * @irq_masks_cur: currently active value
- * @irq_masks_cache: cached hardware value
- * @type: indicate which s5m87xx "variant" is used
+ * struct sec_pmic_dev - s2m/s5m master device for sub-drivers
+ * @dev: Master device of the chip
+ * @pdata: Platform data populated with data from DTS
+ * or board files
+ * @regmap_pmic: Regmap associated with PMIC's I2C address
+ * @i2c: I2C client of the main driver
+ * @device_type: Type of device, matches enum sec_device_type
+ * @irq_base: Base IRQ number for device, required for IRQs
+ * @irq: Generic IRQ number for device
+ * @irq_data: Runtime data structure for IRQ controller
+ * @ono: Power onoff IRQ number for s5m87xx
+ * @wakeup: Whether or not this is a wakeup device
+ * @wtsr_smpl: Whether or not to enable in RTC driver the Watchdog
+ * Timer Software Reset (registers set to default value
+ * after PWRHOLD falling) and Sudden Momentary Power Loss
+ * (PMIC will enter power on sequence after short drop in
+ * VBATT voltage).
*/
struct sec_pmic_dev {
struct device *dev;
struct sec_platform_data *pdata;
struct regmap *regmap_pmic;
- struct regmap *regmap_rtc;
struct i2c_client *i2c;
- struct i2c_client *rtc;
- int device_type;
+ unsigned long device_type;
int irq_base;
int irq;
struct regmap_irq_chip_data *irq_data;
int ono;
- unsigned long type;
bool wakeup;
bool wtsr_smpl;
};
diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
index 48395a69a7e9..575a86c7fcbd 100644
--- a/include/linux/mfd/stmpe.h
+++ b/include/linux/mfd/stmpe.h
@@ -11,6 +11,7 @@
#include <linux/mutex.h>
struct device;
+struct regulator;
enum stmpe_block {
STMPE_BLOCK_GPIO = 1 << 0,
@@ -62,6 +63,8 @@ struct stmpe_client_info;
/**
* struct stmpe - STMPE MFD structure
+ * @vcc: optional VCC regulator
+ * @vio: optional VIO regulator
* @lock: lock protecting I/O operations
* @irq_lock: IRQ bus lock
* @dev: device, mostly for dev_dbg()
@@ -73,13 +76,14 @@ struct stmpe_client_info;
* @regs: list of addresses of registers which are at different addresses on
* different variants. Indexed by one of STMPE_IDX_*.
* @irq: irq number for stmpe
- * @irq_base: starting IRQ number for internal IRQs
* @num_gpios: number of gpios, differs for variants
* @ier: cache of IER registers for bus_lock
* @oldier: cache of IER registers for bus_lock
* @pdata: platform data
*/
struct stmpe {
+ struct regulator *vcc;
+ struct regulator *vio;
struct mutex lock;
struct mutex irq_lock;
struct device *dev;
@@ -91,7 +95,6 @@ struct stmpe {
const u8 *regs;
int irq;
- int irq_base;
int num_gpios;
u8 ier[2];
u8 oldier[2];
@@ -132,8 +135,6 @@ struct stmpe_keypad_platform_data {
/**
* struct stmpe_gpio_platform_data - STMPE GPIO platform data
- * @gpio_base: first gpio number assigned. A maximum of
- * %STMPE_NR_GPIOS GPIOs will be allocated.
* @norequest_mask: bitmask specifying which GPIOs should _not_ be
* requestable due to different usage (e.g. touch, keypad)
* STMPE_GPIO_NOREQ_* macros can be used here.
@@ -141,7 +142,6 @@ struct stmpe_keypad_platform_data {
* @remove: board specific remove callback
*/
struct stmpe_gpio_platform_data {
- int gpio_base;
unsigned norequest_mask;
void (*setup)(struct stmpe *stmpe, unsigned gpio_base);
void (*remove)(struct stmpe *stmpe, unsigned gpio_base);
@@ -195,8 +195,6 @@ struct stmpe_ts_platform_data {
* @irq_trigger: IRQ trigger to use for the interrupt to the host
* @autosleep: bool to enable/disable stmpe autosleep
* @autosleep_timeout: inactivity timeout in milliseconds for autosleep
- * @irq_base: base IRQ number. %STMPE_NR_IRQS irqs will be used, or
- * %STMPE_NR_INTERNAL_IRQS if the GPIO driver is not used.
* @irq_over_gpio: true if gpio is used to get irq
* @irq_gpio: gpio number over which irq will be requested (significant only if
* irq_over_gpio is true)
@@ -207,7 +205,6 @@ struct stmpe_ts_platform_data {
struct stmpe_platform_data {
int id;
unsigned int blocks;
- int irq_base;
unsigned int irq_trigger;
bool autosleep;
bool irq_over_gpio;
@@ -219,10 +216,4 @@ struct stmpe_platform_data {
struct stmpe_ts_platform_data *ts;
};
-#define STMPE_NR_INTERNAL_IRQS 9
-#define STMPE_INT_GPIO(x) (STMPE_NR_INTERNAL_IRQS + (x))
-
-#define STMPE_NR_GPIOS 24
-#define STMPE_NR_IRQS STMPE_INT_GPIO(STMPE_NR_GPIOS)
-
#endif
diff --git a/include/linux/mfd/syscon.h b/include/linux/mfd/syscon.h
index 8789fa3c7fd9..75e543b78f53 100644
--- a/include/linux/mfd/syscon.h
+++ b/include/linux/mfd/syscon.h
@@ -15,6 +15,8 @@
#ifndef __LINUX_MFD_SYSCON_H__
#define __LINUX_MFD_SYSCON_H__
+#include <linux/err.h>
+
struct device_node;
#ifdef CONFIG_MFD_SYSCON
diff --git a/include/linux/mfd/tps65218.h b/include/linux/mfd/tps65218.h
index d2e357df5a0e..2f9b593246ee 100644
--- a/include/linux/mfd/tps65218.h
+++ b/include/linux/mfd/tps65218.h
@@ -267,7 +267,6 @@ struct tps65218 {
u32 irq_mask;
struct regmap_irq_chip_data *irq_data;
struct regulator_desc desc[TPS65218_NUM_REGULATOR];
- struct regulator_dev *rdev[TPS65218_NUM_REGULATOR];
struct tps_info *info[TPS65218_NUM_REGULATOR];
struct regmap *regmap;
};
diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h
index 81f639bc1ae6..8f9fc3d26e6d 100644
--- a/include/linux/mfd/twl6040.h
+++ b/include/linux/mfd/twl6040.h
@@ -28,6 +28,7 @@
#include <linux/interrupt.h>
#include <linux/mfd/core.h>
#include <linux/regulator/consumer.h>
+#include <linux/clk.h>
#define TWL6040_REG_ASICID 0x01
#define TWL6040_REG_ASICREV 0x02
@@ -157,6 +158,7 @@
#define TWL6040_I2CSEL 0x01
#define TWL6040_RESETSPLIT 0x04
#define TWL6040_INTCLRMODE 0x08
+#define TWL6040_I2CMODE(x) ((x & 0x3) << 4)
/* STATUS (0x2E) fields */
@@ -222,6 +224,7 @@ struct twl6040 {
struct regmap *regmap;
struct regmap_irq_chip_data *irq_data;
struct regulator_bulk_data supplies[2]; /* supplies for vio, v2v1 */
+ struct clk *clk32k;
struct mutex mutex;
struct mutex irq_mutex;
struct mfd_cell cells[TWL6040_CELLS];