summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@linuxfoundation.org>2015-09-04 09:11:24 -0700
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2015-09-04 09:14:20 -0700
commit062a68a5e0aaa9577d75391ffafa11e3c2a5f892 (patch)
tree0e77ed0c4aab7319e9f704ebebc3ddaf2d0138f7
parenta4fdb2a46f617b8b2cd47acec026ec16532edbc6 (diff)
Revert "uart: pl011: Add support to ZTE ZX296702 uart"
This reverts commit 8cd90e50d1408c65c355084b1c7f8f9085f49c6b as with this patch the serial console is broken on lots of platforms. Reported-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jun Nie <jun.nie@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-rw-r--r--drivers/tty/serial/Kconfig4
-rw-r--r--drivers/tty/serial/amba-pl011.c195
-rw-r--r--include/linux/amba/serial.h14
3 files changed, 16 insertions, 197 deletions
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index ed299b9e6375..687b1ea294b7 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -47,12 +47,12 @@ config SERIAL_AMBA_PL010_CONSOLE
config SERIAL_AMBA_PL011
tristate "ARM AMBA PL011 serial port support"
- depends on ARM_AMBA || SOC_ZX296702
+ depends on ARM_AMBA
select SERIAL_CORE
help
This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M
- here. Say Y or M if you have SOC_ZX296702.
+ here.
If unsure, say N.
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 2af09ab153b6..017443d092c1 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -74,10 +74,6 @@
/* There is by now at least one vendor with differing details, so handle it */
struct vendor_data {
unsigned int ifls;
- unsigned int fr_busy;
- unsigned int fr_dsr;
- unsigned int fr_cts;
- unsigned int fr_ri;
unsigned int lcrh_tx;
unsigned int lcrh_rx;
u16 *reg_lut;
@@ -131,7 +127,6 @@ static u16 arm_reg[] = {
[REG_DMACR] = UART011_DMACR,
};
-#ifdef CONFIG_ARM_AMBA
static unsigned int get_fifosize_arm(struct amba_device *dev)
{
return amba_rev(dev) < 3 ? 16 : 32;
@@ -139,10 +134,6 @@ static unsigned int get_fifosize_arm(struct amba_device *dev)
static struct vendor_data vendor_arm = {
.ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
- .fr_busy = UART01x_FR_BUSY,
- .fr_dsr = UART01x_FR_DSR,
- .fr_cts = UART01x_FR_CTS,
- .fr_ri = UART011_FR_RI,
.lcrh_tx = REG_LCRH,
.lcrh_rx = REG_LCRH,
.reg_lut = arm_reg,
@@ -153,13 +144,8 @@ static struct vendor_data vendor_arm = {
.fixed_options = false,
.get_fifosize = get_fifosize_arm,
};
-#endif
static struct vendor_data vendor_sbsa = {
- .fr_busy = UART01x_FR_BUSY,
- .fr_dsr = UART01x_FR_DSR,
- .fr_cts = UART01x_FR_CTS,
- .fr_ri = UART011_FR_RI,
.reg_lut = arm_reg,
.oversampling = false,
.dma_threshold = false,
@@ -168,7 +154,6 @@ static struct vendor_data vendor_sbsa = {
.fixed_options = true,
};
-#ifdef CONFIG_ARM_AMBA
static u16 st_reg[] = {
[REG_DR] = UART01x_DR,
[REG_RSR] = UART01x_RSR,
@@ -195,10 +180,6 @@ static unsigned int get_fifosize_st(struct amba_device *dev)
static struct vendor_data vendor_st = {
.ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
- .fr_busy = UART01x_FR_BUSY,
- .fr_dsr = UART01x_FR_DSR,
- .fr_cts = UART01x_FR_CTS,
- .fr_ri = UART011_FR_RI,
.lcrh_tx = REG_LCRH,
.lcrh_rx = REG_ST_LCRH_RX,
.reg_lut = st_reg,
@@ -209,43 +190,6 @@ static struct vendor_data vendor_st = {
.fixed_options = false,
.get_fifosize = get_fifosize_st,
};
-#endif
-
-#ifdef CONFIG_SOC_ZX296702
-static u16 zte_reg[] = {
- [REG_DR] = ZX_UART01x_DR,
- [REG_RSR] = UART01x_RSR,
- [REG_ST_DMAWM] = ST_UART011_DMAWM,
- [REG_FR] = ZX_UART01x_FR,
- [REG_ST_LCRH_RX] = ST_UART011_LCRH_RX,
- [REG_ILPR] = UART01x_ILPR,
- [REG_IBRD] = UART011_IBRD,
- [REG_FBRD] = UART011_FBRD,
- [REG_LCRH] = ZX_UART011_LCRH_TX,
- [REG_CR] = ZX_UART011_CR,
- [REG_IFLS] = ZX_UART011_IFLS,
- [REG_IMSC] = ZX_UART011_IMSC,
- [REG_RIS] = ZX_UART011_RIS,
- [REG_MIS] = ZX_UART011_MIS,
- [REG_ICR] = ZX_UART011_ICR,
- [REG_DMACR] = ZX_UART011_DMACR,
-};
-
-static struct vendor_data vendor_zte = {
- .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
- .fr_busy = ZX_UART01x_FR_BUSY,
- .fr_dsr = ZX_UART01x_FR_DSR,
- .fr_cts = ZX_UART01x_FR_CTS,
- .fr_ri = ZX_UART011_FR_RI,
- .lcrh_tx = REG_LCRH,
- .lcrh_rx = REG_ST_LCRH_RX,
- .reg_lut = zte_reg,
- .oversampling = false,
- .dma_threshold = false,
- .cts_event_workaround = false,
- .fixed_options = false,
-};
-#endif
/* Deals with DMA transactions */
@@ -289,10 +233,6 @@ struct uart_amba_port {
unsigned int im; /* interrupt mask */
unsigned int old_status;
unsigned int fifosize; /* vendor-specific */
- unsigned int fr_busy; /* vendor-specific */
- unsigned int fr_dsr; /* vendor-specific */
- unsigned int fr_cts; /* vendor-specific */
- unsigned int fr_ri; /* vendor-specific */
unsigned int lcrh_tx; /* vendor-specific */
unsigned int lcrh_rx; /* vendor-specific */
unsigned int old_cr; /* state during shutdown */
@@ -1223,7 +1163,7 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap)
return;
/* Disable RX and TX DMA */
- while (pl011_readw(uap, REG_FR) & uap->fr_busy)
+ while (pl011_readw(uap, REG_FR) & UART01x_FR_BUSY)
barrier();
spin_lock_irq(&uap->port.lock);
@@ -1472,11 +1412,11 @@ static void pl011_modem_status(struct uart_amba_port *uap)
if (delta & UART01x_FR_DCD)
uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD);
- if (delta & uap->fr_dsr)
+ if (delta & UART01x_FR_DSR)
uap->port.icount.dsr++;
- if (delta & uap->fr_cts)
- uart_handle_cts_change(&uap->port, status & uap->fr_cts);
+ if (delta & UART01x_FR_CTS)
+ uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
}
@@ -1547,7 +1487,7 @@ static unsigned int pl011_tx_empty(struct uart_port *port)
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
unsigned int status = pl011_readw(uap, REG_FR);
- return status & (uap->fr_busy|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
+ return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
}
static unsigned int pl011_get_mctrl(struct uart_port *port)
@@ -1562,9 +1502,9 @@ static unsigned int pl011_get_mctrl(struct uart_port *port)
result |= tiocmbit
TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR);
- TIOCMBIT(uap->fr_dsr, TIOCM_DSR);
- TIOCMBIT(uap->fr_cts, TIOCM_CTS);
- TIOCMBIT(uap->fr_ri, TIOCM_RNG);
+ TIOCMBIT(UART01x_FR_DSR, TIOCM_DSR);
+ TIOCMBIT(UART01x_FR_CTS, TIOCM_CTS);
+ TIOCMBIT(UART011_FR_RI, TIOCM_RNG);
#undef TIOCMBIT
return result;
}
@@ -1780,7 +1720,8 @@ static int pl011_startup(struct uart_port *port)
/*
* initialise the old status of the modem signals
*/
- uap->old_status = pl011_readw(uap, REG_FR) & UART01x_FR_MODEM_ANY;
+ uap->old_status = pl011_readw(uap, REG_FR) &
+ UART01x_FR_MODEM_ANY;
/* Startup DMA */
pl011_dma_startup(uap);
@@ -1859,7 +1800,7 @@ static void pl011_disable_interrupts(struct uart_amba_port *uap)
/* mask all interrupts and clear all pending ones */
uap->im = 0;
pl011_writew(uap, uap->im, REG_IMSC);
- pl011_writew(uap, 0xffff, REG_ICR);
+ pl011_writew(0xffff, REG_ICR);
spin_unlock_irq(&uap->port.lock);
}
@@ -2237,7 +2178,7 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
*/
do {
status = pl011_readw(uap, REG_FR);
- } while (status & uap->fr_busy);
+ } while (status & UART01x_FR_BUSY);
if (!uap->vendor->always_enabled)
pl011_writew(uap, old_cr, REG_CR);
@@ -2354,7 +2295,7 @@ static void pl011_putc(struct uart_port *port, int c)
while (pl011_readw(uap, REG_FR) & UART01x_FR_TXFF)
;
pl011_writeb(uap, c, REG_DR);
- while (pl011_readw(uap, REG_FR) & uap->fr_busy)
+ while (pl011_readw(uap, REG_FR) & UART01x_FR_BUSY)
;
}
@@ -2500,7 +2441,6 @@ static int pl011_register_port(struct uart_amba_port *uap)
return ret;
}
-#ifdef CONFIG_ARM_AMBA
static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
{
struct uart_amba_port *uap;
@@ -2524,10 +2464,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
uap->reg_lut = vendor->reg_lut;
uap->lcrh_rx = vendor->lcrh_rx;
uap->lcrh_tx = vendor->lcrh_tx;
- uap->fr_busy = vendor->fr_busy;
- uap->fr_dsr = vendor->fr_dsr;
- uap->fr_cts = vendor->fr_cts;
- uap->fr_ri = vendor->fr_ri;
uap->fifosize = vendor->get_fifosize(dev);
uap->port.irq = dev->irq[0];
uap->port.ops = &amba_pl011_pops;
@@ -2551,67 +2487,6 @@ static int pl011_remove(struct amba_device *dev)
pl011_unregister_port(uap);
return 0;
}
-#endif
-
-#ifdef CONFIG_SOC_ZX296702
-static int zx_uart_probe(struct platform_device *pdev)
-{
- struct uart_amba_port *uap;
- struct vendor_data *vendor = &vendor_zte;
- struct resource *res;
- int portnr, ret;
-
- portnr = pl011_find_free_port();
- if (portnr < 0)
- return portnr;
-
- uap = devm_kzalloc(&pdev->dev, sizeof(struct uart_amba_port),
- GFP_KERNEL);
- if (!uap) {
- ret = -ENOMEM;
- goto out;
- }
-
- uap->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(uap->clk)) {
- ret = PTR_ERR(uap->clk);
- goto out;
- }
-
- uap->vendor = vendor;
- uap->reg_lut = vendor->reg_lut;
- uap->lcrh_rx = vendor->lcrh_rx;
- uap->lcrh_tx = vendor->lcrh_tx;
- uap->fr_busy = vendor->fr_busy;
- uap->fr_dsr = vendor->fr_dsr;
- uap->fr_cts = vendor->fr_cts;
- uap->fr_ri = vendor->fr_ri;
- uap->fifosize = 16;
- uap->port.irq = platform_get_irq(pdev, 0);
- uap->port.ops = &amba_pl011_pops;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
- ret = pl011_setup_port(&pdev->dev, uap, res, portnr);
- if (ret)
- return ret;
-
- platform_set_drvdata(pdev, uap);
-
- return pl011_register_port(uap);
-out:
- return ret;
-}
-
-static int zx_uart_remove(struct platform_device *pdev)
-{
- struct uart_amba_port *uap = platform_get_drvdata(pdev);
-
- uart_remove_one_port(&amba_reg, &uap->port);
- pl011_unregister_port(uap);
- return 0;
-}
-#endif
#ifdef CONFIG_PM_SLEEP
static int pl011_suspend(struct device *dev)
@@ -2669,10 +2544,6 @@ static int sbsa_uart_probe(struct platform_device *pdev)
uap->vendor = &vendor_sbsa;
uap->reg_lut = vendor_sbsa.reg_lut;
- uap->fr_busy = vendor_sbsa.fr_busy;
- uap->fr_dsr = vendor_sbsa.fr_dsr;
- uap->fr_cts = vendor_sbsa.fr_cts;
- uap->fr_ri = vendor_sbsa.fr_ri;
uap->fifosize = 32;
uap->port.irq = platform_get_irq(pdev, 0);
uap->port.ops = &sbsa_uart_pops;
@@ -2722,7 +2593,6 @@ static struct platform_driver arm_sbsa_uart_platform_driver = {
},
};
-#ifdef CONFIG_ARM_AMBA
static struct amba_id pl011_ids[] = {
{
.id = 0x00041011,
@@ -2748,57 +2618,20 @@ static struct amba_driver pl011_driver = {
.probe = pl011_probe,
.remove = pl011_remove,
};
-#endif
-
-#ifdef CONFIG_SOC_ZX296702
-static const struct of_device_id zx_uart_dt_ids[] = {
- { .compatible = "zte,zx296702-uart", },
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, zx_uart_dt_ids);
-
-static struct platform_driver zx_uart_driver = {
- .driver = {
- .name = "zx-uart",
- .owner = THIS_MODULE,
- .pm = &pl011_dev_pm_ops,
- .of_match_table = zx_uart_dt_ids,
- },
- .probe = zx_uart_probe,
- .remove = zx_uart_remove,
-};
-#endif
-
static int __init pl011_init(void)
{
- int ret;
printk(KERN_INFO "Serial: AMBA PL011 UART driver\n");
if (platform_driver_register(&arm_sbsa_uart_platform_driver))
pr_warn("could not register SBSA UART platform driver\n");
-
-#ifdef CONFIG_SOC_ZX296702
- ret = platform_driver_register(&zx_uart_driver);
- if (ret)
- pr_warn("could not register ZX UART platform driver\n");
-#endif
-
-#ifdef CONFIG_ARM_AMBA
- ret = amba_driver_register(&pl011_driver);
-#endif
- return ret;
+ return amba_driver_register(&pl011_driver);
}
static void __exit pl011_exit(void)
{
platform_driver_unregister(&arm_sbsa_uart_platform_driver);
-#ifdef CONFIG_SOC_ZX296702
- platform_driver_unregister(&zx_uart_driver);
-#endif
-#ifdef CONFIG_ARM_AMBA
amba_driver_unregister(&pl011_driver);
-#endif
}
/*
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index 6a0a89ed7f81..0ddb5c02ad8b 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -33,14 +33,12 @@
#define UART01x_DR 0x00 /* Data read or written from the interface. */
#define UART01x_RSR 0x04 /* Receive status register (Read). */
#define UART01x_ECR 0x04 /* Error clear register (Write). */
-#define ZX_UART01x_DR 0x04 /* Data read or written from the interface. */
#define UART010_LCRH 0x08 /* Line control register, high byte. */
#define ST_UART011_DMAWM 0x08 /* DMA watermark configure register. */
#define UART010_LCRM 0x0C /* Line control register, middle byte. */
#define ST_UART011_TIMEOUT 0x0C /* Timeout period register. */
#define UART010_LCRL 0x10 /* Line control register, low byte. */
#define UART010_CR 0x14 /* Control register. */
-#define ZX_UART01x_FR 0x14 /* Flag register (Read only). */
#define UART01x_FR 0x18 /* Flag register (Read only). */
#define UART010_IIR 0x1C /* Interrupt identification register (Read). */
#define UART010_ICR 0x1C /* Interrupt clear register (Write). */
@@ -51,21 +49,13 @@
#define UART011_LCRH 0x2c /* Line control register. */
#define ST_UART011_LCRH_TX 0x2c /* Tx Line control register. */
#define UART011_CR 0x30 /* Control register. */
-#define ZX_UART011_LCRH_TX 0x30 /* Tx Line control register. */
#define UART011_IFLS 0x34 /* Interrupt fifo level select. */
-#define ZX_UART011_CR 0x34 /* Control register. */
-#define ZX_UART011_IFLS 0x38 /* Interrupt fifo level select. */
#define UART011_IMSC 0x38 /* Interrupt mask. */
#define UART011_RIS 0x3c /* Raw interrupt status. */
#define UART011_MIS 0x40 /* Masked interrupt status. */
-#define ZX_UART011_IMSC 0x40 /* Interrupt mask. */
#define UART011_ICR 0x44 /* Interrupt clear register. */
-#define ZX_UART011_RIS 0x44 /* Raw interrupt status. */
#define UART011_DMACR 0x48 /* DMA control register. */
-#define ZX_UART011_MIS 0x48 /* Masked interrupt status. */
-#define ZX_UART011_ICR 0x4c /* Interrupt clear register. */
#define ST_UART011_XFCR 0x50 /* XON/XOFF control register. */
-#define ZX_UART011_DMACR 0x50 /* DMA control register. */
#define ST_UART011_XON1 0x54 /* XON1 register. */
#define ST_UART011_XON2 0x58 /* XON2 register. */
#define ST_UART011_XOFF1 0x5C /* XON1 register. */
@@ -85,19 +75,15 @@
#define UART01x_RSR_PE 0x02
#define UART01x_RSR_FE 0x01
-#define ZX_UART01x_FR_BUSY 0x300
#define UART011_FR_RI 0x100
#define UART011_FR_TXFE 0x080
#define UART011_FR_RXFF 0x040
#define UART01x_FR_TXFF 0x020
#define UART01x_FR_RXFE 0x010
#define UART01x_FR_BUSY 0x008
-#define ZX_UART01x_FR_DSR 0x008
#define UART01x_FR_DCD 0x004
#define UART01x_FR_DSR 0x002
-#define ZX_UART01x_FR_CTS 0x002
#define UART01x_FR_CTS 0x001
-#define ZX_UART011_FR_RI 0x001
#define UART01x_FR_TMSK (UART01x_FR_TXFF + UART01x_FR_BUSY)
#define UART011_CR_CTSEN 0x8000 /* CTS hardware flow control */