colibri-imx6: use stopmode for poweroff

After the system has been shutdown with PMIC_ON_REQ and VCC_BATT is supplied
from a battery it will never restart either by RESET or power cycle.

So use the PMIC_STBY_REQ after shutdown to switch of power rails.

3 files changed, 89 insertions, 1 deletions

diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index 587cc7e9f4e5..97f6af7dae77 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -431,6 +431,12 @@ void imx6_pm_set_ccm_base(void __iomem *base)
 	ccm_base = base;
 }
 
+void imx6_stop_mode_poweroff(void)
+{
+	imx6_set_lpm(STOP_POWER_OFF);
+	cpu_do_idle();
+}
+
 void __init imx6_pm_init(void)
 {
 	iram_paddr = MX6_SUSPEND_IRAM_ADDR;
@@ -450,4 +456,15 @@ void __init imx6_pm_init(void)
 		cpu_type = MXC_CPU_IMX6DL;
 	else
 		cpu_type = MXC_CPU_IMX6SL;
+
+#ifndef CONFIG_POWER_RESET_GPIO
+	/*
+	 * if no specific power off function in board file, power off system by
+	 * SNVS
+	 */
+	if (!pm_power_off)
+		if (of_machine_is_compatible("toradex,colibri_imx6dl"))
+			pm_power_off = imx6_stop_mode_poweroff;
+#endif
+
 }
diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 4ec8d77b9eb1..57496125cc42 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -522,6 +522,75 @@ static int pfuze100_regulator_remove(struct i2c_client *client)
 	return 0;
 }
 
+static void pfuze100_regulator_shutdown(struct i2c_client *client)
+{
+	if (of_machine_is_compatible("toradex,colibri_imx6dl")) {
+		int ret;
+		/* Configure all regulators to off on PMIC standby. For Colibri iMX6
+		 * we use the PMIC_STBY_REQ after shutdown, as the PMIC_ON_REQ signal
+		 * together with VCC_BATT supplied from a battery leads to a
+		 * nonbooting system.
+		 * After the system has been shutdown with PMIC_ON_REQ it will never
+		 * restart either by RESET or power cycle.
+		 */
+		struct pfuze_chip *pfuze_chip = i2c_get_clientdata(client);
+
+		ret = regmap_update_bits(pfuze_chip->regmap,
+				PFUZE100_SW1ABVOL + PFUZE100_MODE_OFFSET,
+				0x0f, 4);
+		if (ret < 0)
+			dev_err(pfuze_chip->dev, "stby config failed %d\n", ret);
+
+		ret = regmap_update_bits(pfuze_chip->regmap,
+				PFUZE100_SW1CVOL + PFUZE100_MODE_OFFSET,
+				0x0f, 4);
+		if (ret < 0)
+			dev_err(pfuze_chip->dev, "stby config failed %d\n", ret);
+
+		ret = regmap_update_bits(pfuze_chip->regmap,
+				PFUZE100_SW3AVOL + PFUZE100_MODE_OFFSET,
+				0x0f, 4);
+		if (ret < 0)
+			dev_err(pfuze_chip->dev, "stby config failed %d\n", ret);
+
+		ret = regmap_update_bits(pfuze_chip->regmap,
+				PFUZE100_SW3BVOL + PFUZE100_MODE_OFFSET,
+				0x0f, 4);
+		if (ret < 0)
+			dev_err(pfuze_chip->dev, "stby config failed %d\n", ret);
+
+		ret = regmap_update_bits(pfuze_chip->regmap,
+				PFUZE100_SWBSTCON1,
+				0x60, 0);
+		if (ret < 0)
+			dev_err(pfuze_chip->dev, "stby config failed %d\n", ret);
+
+		ret = regmap_update_bits(pfuze_chip->regmap,
+				PFUZE100_VGEN2VOL,
+				0x20, 0x20);
+		if (ret < 0)
+			dev_err(pfuze_chip->dev, "stby vgen config failed %d\n", ret);
+
+		ret = regmap_update_bits(pfuze_chip->regmap,
+				PFUZE100_VGEN4VOL,
+				0x20, 0x20);
+		if (ret < 0)
+			dev_err(pfuze_chip->dev, "stby vgen config failed %d\n", ret);
+
+		ret = regmap_update_bits(pfuze_chip->regmap,
+				PFUZE100_VGEN5VOL,
+				0x20, 0x20);
+		if (ret < 0)
+			dev_err(pfuze_chip->dev, "stby vgen config failed %d\n", ret);
+
+		ret = regmap_update_bits(pfuze_chip->regmap,
+				PFUZE100_VGEN6VOL,
+				0x20, 0x20);
+		if (ret < 0)
+			dev_err(pfuze_chip->dev, "stby vgen config failed %d\n", ret);
+	}
+}
+
 static struct i2c_driver pfuze_driver = {
 	.id_table = pfuze_device_id,
 	.driver = {
@@ -531,6 +600,7 @@ static struct i2c_driver pfuze_driver = {
 	},
 	.probe = pfuze100_regulator_probe,
 	.remove = pfuze100_regulator_remove,
+	.shutdown = pfuze100_regulator_shutdown,
 };
 module_i2c_driver(pfuze_driver);
 
diff --git a/drivers/rtc/rtc-snvs.c b/drivers/rtc/rtc-snvs.c
index ff2935a32db0..236d68705e48 100644
--- a/drivers/rtc/rtc-snvs.c
+++ b/drivers/rtc/rtc-snvs.c
@@ -309,7 +309,8 @@ static int snvs_rtc_probe(struct platform_device *pdev)
 	 * SNVS
 	 */
 	if (!pm_power_off)
-		pm_power_off = snvs_poweroff;
+		if (!of_machine_is_compatible("toradex,colibri_imx6dl"))
+			pm_power_off = snvs_poweroff;
 #endif
 
 	return 0;