summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorGong Jun <JGong@nuvoton.com>2009-03-30 21:46:42 +0200
committerJean Delvare <khali@linux-fr.org>2009-03-30 21:46:42 +0200
commit237c8d2f54ff12bd4fea1a9d18a94ae5810271d3 (patch)
treef93114b8b4c24a59151353cdfb63dd52fa055f9b
parent1704b26ee3fd89c76724cbea238e951dc019faca (diff)
hwmon: (w83627ehf) Add support for W83667HG
Add initial support for the Nuvoton W83667HG chip to the w83627ehf driver. It has been tested on ASUS P5QL PRO by Gong Jun. At the moment there is still a usability issue which is that only in6 or temp3 can be present on the W83667HG, so the driver shouldn't expose both. This will be addressed later. Signed-off-by: Gong Jun <JGong@nuvoton.com> Acked-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-rw-r--r--Documentation/hwmon/w83627ehf29
-rw-r--r--drivers/hwmon/Kconfig4
-rw-r--r--drivers/hwmon/w83627ehf.c106
3 files changed, 92 insertions, 47 deletions
diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf
index d6e1ae30fa6e..b6eb59384bb3 100644
--- a/Documentation/hwmon/w83627ehf
+++ b/Documentation/hwmon/w83627ehf
@@ -2,30 +2,40 @@ Kernel driver w83627ehf
=======================
Supported chips:
- * Winbond W83627EHF/EHG/DHG (ISA access ONLY)
+ * Winbond W83627EHF/EHG (ISA access ONLY)
Prefix: 'w83627ehf'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet:
- http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83627EHF_%20W83627EHGb.pdf
- DHG datasheet confidential.
+ http://www.nuvoton.com.tw/NR/rdonlyres/A6A258F0-F0C9-4F97-81C0-C4D29E7E943E/0/W83627EHF.pdf
+ * Winbond W83627DHG
+ Prefix: 'w83627dhg'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ Datasheet:
+ http://www.nuvoton.com.tw/NR/rdonlyres/7885623D-A487-4CF9-A47F-30C5F73D6FE6/0/W83627DHG.pdf
+ * Winbond W83667HG
+ Prefix: 'w83667hg'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ Datasheet: not available
Authors:
Jean Delvare <khali@linux-fr.org>
Yuan Mu (Winbond)
Rudolf Marek <r.marek@assembler.cz>
David Hubbard <david.c.hubbard@gmail.com>
+ Gong Jun <JGong@nuvoton.com>
Description
-----------
-This driver implements support for the Winbond W83627EHF, W83627EHG, and
-W83627DHG super I/O chips. We will refer to them collectively as Winbond chips.
+This driver implements support for the Winbond W83627EHF, W83627EHG,
+W83627DHG and W83667HG super I/O chips. We will refer to them collectively
+as Winbond chips.
The chips implement three temperature sensors, five fan rotation
speed sensors, ten analog voltage sensors (only nine for the 627DHG), one
-VID (6 pins for the 627EHF/EHG, 8 pins for the 627DHG), alarms with beep
-warnings (control unimplemented), and some automatic fan regulation
-strategies (plus manual fan control mode).
+VID (6 pins for the 627EHF/EHG, 8 pins for the 627DHG and 667HG), alarms
+with beep warnings (control unimplemented), and some automatic fan
+regulation strategies (plus manual fan control mode).
Temperatures are measured in degrees Celsius and measurement resolution is 1
degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when
@@ -54,7 +64,8 @@ follows:
temp1 -> pwm1
temp2 -> pwm2
temp3 -> pwm3
-prog -> pwm4 (the programmable setting is not supported by the driver)
+prog -> pwm4 (not on 667HG; the programmable setting is not supported by
+ the driver)
/sys files
----------
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index b4eea0292c1a..0eb4170cc4af 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -827,7 +827,7 @@ config SENSORS_W83627HF
will be called w83627hf.
config SENSORS_W83627EHF
- tristate "Winbond W83627EHF/DHG"
+ tristate "Winbond W83627EHF/EHG/DHG, W83667HG"
select HWMON_VID
help
If you say yes here you get support for the hardware
@@ -838,6 +838,8 @@ config SENSORS_W83627EHF
chip suited for specific Intel processors that use PECI such as
the Core 2 Duo.
+ This driver also supports the W83667HG chip.
+
This driver can also be built as a module. If so, the module
will be called w83627ehf.
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 18432e34dc7a..20a9332959bb 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -36,6 +36,7 @@
w83627ehf 10 5 4 3 0x8850 0x88 0x5ca3
0x8860 0xa1
w83627dhg 9 5 4 3 0xa020 0xc1 0x5ca3
+ w83667hg 9 5 3 3 0xa510 0xc1 0x5ca3
*/
#include <linux/module.h>
@@ -52,12 +53,13 @@
#include <asm/io.h>
#include "lm75.h"
-enum kinds { w83627ehf, w83627dhg };
+enum kinds { w83627ehf, w83627dhg, w83667hg };
/* used to set data->name = w83627ehf_device_names[data->sio_kind] */
static const char * w83627ehf_device_names[] = {
"w83627ehf",
"w83627dhg",
+ "w83667hg",
};
static unsigned short force_id;
@@ -71,6 +73,7 @@ MODULE_PARM_DESC(force_id, "Override the detected device ID");
*/
#define W83627EHF_LD_HWM 0x0b
+#define W83667HG_LD_VID 0x0d
#define SIO_REG_LDSEL 0x07 /* Logical device select */
#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */
@@ -83,6 +86,7 @@ MODULE_PARM_DESC(force_id, "Override the detected device ID");
#define SIO_W83627EHF_ID 0x8850
#define SIO_W83627EHG_ID 0x8860
#define SIO_W83627DHG_ID 0xa020
+#define SIO_W83667HG_ID 0xa510
#define SIO_ID_MASK 0xFFF0
static inline void
@@ -289,6 +293,7 @@ struct w83627ehf_data {
u8 pwm_mode[4]; /* 0->DC variable voltage, 1->PWM variable duty cycle */
u8 pwm_enable[4]; /* 1->manual
2->thermal cruise (also called SmartFan I) */
+ u8 pwm_num; /* number of pwm */
u8 pwm[4];
u8 target_temp[4];
u8 tolerance[4];
@@ -1192,7 +1197,7 @@ static void w83627ehf_device_remove_files(struct device *dev)
device_remove_file(dev, &sda_fan_div[i].dev_attr);
device_remove_file(dev, &sda_fan_min[i].dev_attr);
}
- for (i = 0; i < 4; i++) {
+ for (i = 0; i < data->pwm_num; i++) {
device_remove_file(dev, &sda_pwm[i].dev_attr);
device_remove_file(dev, &sda_pwm_mode[i].dev_attr);
device_remove_file(dev, &sda_pwm_enable[i].dev_attr);
@@ -1272,8 +1277,10 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
data->name = w83627ehf_device_names[sio_data->kind];
platform_set_drvdata(pdev, data);
- /* 627EHG and 627EHF have 10 voltage inputs; DHG has 9 */
- data->in_num = (sio_data->kind == w83627dhg) ? 9 : 10;
+ /* 627EHG and 627EHF have 10 voltage inputs; 627DHG and 667HG have 9 */
+ data->in_num = (sio_data->kind == w83627ehf) ? 10 : 9;
+ /* 667HG has 3 pwms */
+ data->pwm_num = (sio_data->kind == w83667hg) ? 3 : 4;
/* Initialize the chip */
w83627ehf_init_device(data);
@@ -1281,44 +1288,64 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
data->vrm = vid_which_vrm();
superio_enter(sio_data->sioreg);
/* Read VID value */
- superio_select(sio_data->sioreg, W83627EHF_LD_HWM);
- if (superio_inb(sio_data->sioreg, SIO_REG_VID_CTRL) & 0x80) {
- /* Set VID input sensibility if needed. In theory the BIOS
- should have set it, but in practice it's not always the
- case. We only do it for the W83627EHF/EHG because the
- W83627DHG is more complex in this respect. */
- if (sio_data->kind == w83627ehf) {
- en_vrm10 = superio_inb(sio_data->sioreg,
- SIO_REG_EN_VRM10);
- if ((en_vrm10 & 0x08) && data->vrm == 90) {
- dev_warn(dev, "Setting VID input voltage to "
- "TTL\n");
- superio_outb(sio_data->sioreg, SIO_REG_EN_VRM10,
- en_vrm10 & ~0x08);
- } else if (!(en_vrm10 & 0x08) && data->vrm == 100) {
- dev_warn(dev, "Setting VID input voltage to "
- "VRM10\n");
- superio_outb(sio_data->sioreg, SIO_REG_EN_VRM10,
- en_vrm10 | 0x08);
- }
- }
-
- data->vid = superio_inb(sio_data->sioreg, SIO_REG_VID_DATA);
- if (sio_data->kind == w83627ehf) /* 6 VID pins only */
- data->vid &= 0x3f;
-
+ if (sio_data->kind == w83667hg) {
+ /* W83667HG has different pins for VID input and output, so
+ we can get the VID input values directly at logical device D
+ 0xe3. */
+ superio_select(sio_data->sioreg, W83667HG_LD_VID);
+ data->vid = superio_inb(sio_data->sioreg, 0xe3);
err = device_create_file(dev, &dev_attr_cpu0_vid);
if (err)
goto exit_release;
} else {
- dev_info(dev, "VID pins in output mode, CPU VID not "
- "available\n");
+ superio_select(sio_data->sioreg, W83627EHF_LD_HWM);
+ if (superio_inb(sio_data->sioreg, SIO_REG_VID_CTRL) & 0x80) {
+ /* Set VID input sensibility if needed. In theory the
+ BIOS should have set it, but in practice it's not
+ always the case. We only do it for the W83627EHF/EHG
+ because the W83627DHG is more complex in this
+ respect. */
+ if (sio_data->kind == w83627ehf) {
+ en_vrm10 = superio_inb(sio_data->sioreg,
+ SIO_REG_EN_VRM10);
+ if ((en_vrm10 & 0x08) && data->vrm == 90) {
+ dev_warn(dev, "Setting VID input "
+ "voltage to TTL\n");
+ superio_outb(sio_data->sioreg,
+ SIO_REG_EN_VRM10,
+ en_vrm10 & ~0x08);
+ } else if (!(en_vrm10 & 0x08)
+ && data->vrm == 100) {
+ dev_warn(dev, "Setting VID input "
+ "voltage to VRM10\n");
+ superio_outb(sio_data->sioreg,
+ SIO_REG_EN_VRM10,
+ en_vrm10 | 0x08);
+ }
+ }
+
+ data->vid = superio_inb(sio_data->sioreg,
+ SIO_REG_VID_DATA);
+ if (sio_data->kind == w83627ehf) /* 6 VID pins only */
+ data->vid &= 0x3f;
+
+ err = device_create_file(dev, &dev_attr_cpu0_vid);
+ if (err)
+ goto exit_release;
+ } else {
+ dev_info(dev, "VID pins in output mode, CPU VID not "
+ "available\n");
+ }
}
/* fan4 and fan5 share some pins with the GPIO and serial flash */
-
- fan5pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x2);
- fan4pin = !(superio_inb(sio_data->sioreg, 0x29) & 0x6);
+ if (sio_data->kind == w83667hg) {
+ fan5pin = superio_inb(sio_data->sioreg, 0x27) & 0x20;
+ fan4pin = superio_inb(sio_data->sioreg, 0x27) & 0x40;
+ } else {
+ fan5pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x02);
+ fan4pin = !(superio_inb(sio_data->sioreg, 0x29) & 0x06);
+ }
superio_exit(sio_data->sioreg);
/* It looks like fan4 and fan5 pins can be alternatively used
@@ -1344,7 +1371,7 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
goto exit_remove;
/* if fan4 is enabled create the sf3 files for it */
- if (data->has_fan & (1 << 3))
+ if ((data->has_fan & (1 << 3)) && data->pwm_num >= 4)
for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++) {
if ((err = device_create_file(dev,
&sda_sf3_arrays_fan4[i].dev_attr)))
@@ -1372,7 +1399,7 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
|| (err = device_create_file(dev,
&sda_fan_min[i].dev_attr)))
goto exit_remove;
- if (i < 4 && /* w83627ehf only has 4 pwm */
+ if (i < data->pwm_num &&
((err = device_create_file(dev,
&sda_pwm[i].dev_attr))
|| (err = device_create_file(dev,
@@ -1442,6 +1469,7 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
static const char __initdata sio_name_W83627EHF[] = "W83627EHF";
static const char __initdata sio_name_W83627EHG[] = "W83627EHG";
static const char __initdata sio_name_W83627DHG[] = "W83627DHG";
+ static const char __initdata sio_name_W83667HG[] = "W83667HG";
u16 val;
const char *sio_name;
@@ -1466,6 +1494,10 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
sio_data->kind = w83627dhg;
sio_name = sio_name_W83627DHG;
break;
+ case SIO_W83667HG_ID:
+ sio_data->kind = w83667hg;
+ sio_name = sio_name_W83667HG;
+ break;
default:
if (val != 0xffff)
pr_debug(DRVNAME ": unsupported chip ID: 0x%04x\n",