summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDan Williams <dan.j.williams@intel.com>2008-04-28 02:15:53 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2008-04-28 08:58:42 -0700
commit8b3e6cdc53b7f29f7026955d6cb6902a49322a15 (patch)
tree69d9f22a526e687fe2892d327caa3fa6ddd65cf6
parente46b272b6608783ed7aa7b0594871550ce20b849 (diff)
md: introduce get_priority_stripe() to improve raid456 write performance
Improve write performance by preventing the delayed_list from dumping all its stripes onto the handle_list in one shot. Delayed stripes are now further delayed by being held on the 'hold_list'. The 'hold_list' is bypassed when: * a STRIPE_IO_STARTED stripe is found at the head of 'handle_list' * 'handle_list' is empty and i/o is being done to satisfy full stripe-width write requests * 'bypass_count' is less than 'bypass_threshold'. By default the threshold is 1, i.e. every other stripe handled is a preread stripe provided the top two conditions are false. Benchmark data: System: 2x Xeon 5150, 4x SATA, mem=1GB Baseline: 2.6.24-rc7 Configuration: mdadm --create /dev/md0 /dev/sd[b-e] -n 4 -l 5 --assume-clean Test1: dd if=/dev/zero of=/dev/md0 bs=1024k count=2048 * patched: +33% (stripe_cache_size = 256), +25% (stripe_cache_size = 512) Test2: tiobench --size 2048 --numruns 5 --block 4096 --block 131072 (XFS) * patched: +13% * patched + preread_bypass_threshold = 0: +37% Changes since v1: * reduce bypass_threshold from (chunk_size / sectors_per_chunk) to (1) and make it configurable. This defaults to fairness and modest performance gains out of the box. Changes since v2: * [neilb@suse.de]: kill STRIPE_PRIO_HI and preread_needed as they are not necessary, the important change was clearing STRIPE_DELAYED in add_stripe_bio and this has been moved out to make_request for the hang fix. * [neilb@suse.de]: simplify get_priority_stripe * [dan.j.williams@intel.com]: reset the bypass_count when ->hold_list is sampled empty (+11%) * [dan.j.williams@intel.com]: decrement the bypass_count at the detection of stripes being naturally promoted off of hold_list +2%. Note, resetting bypass_count instead of decrementing on these events yields +4% but that is probably too aggressive. Changes since v3: * cosmetic fixups Tested-by: James W. Laferriere <babydr@baby-dragons.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-rw-r--r--Documentation/md.txt6
-rw-r--r--drivers/md/raid5.c122
-rw-r--r--include/linux/raid/raid5.h7
3 files changed, 125 insertions, 10 deletions
diff --git a/Documentation/md.txt b/Documentation/md.txt
index 396cdd982c26..a8b430627473 100644
--- a/Documentation/md.txt
+++ b/Documentation/md.txt
@@ -450,3 +450,9 @@ These currently include
there are upper and lower limits (32768, 16). Default is 128.
strip_cache_active (currently raid5 only)
number of active entries in the stripe cache
+ preread_bypass_threshold (currently raid5 only)
+ number of times a stripe requiring preread will be bypassed by
+ a stripe that does not require preread. For fairness defaults
+ to 1. Setting this to 0 disables bypass accounting and
+ requires preread stripes to wait until all full-width stripe-
+ writes are complete. Valid values are 0 to stripe_cache_size.
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 4efec467e2f1..45eead608647 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -63,6 +63,7 @@
#define STRIPE_SHIFT (PAGE_SHIFT - 9)
#define STRIPE_SECTORS (STRIPE_SIZE>>9)
#define IO_THRESHOLD 1
+#define BYPASS_THRESHOLD 1
#define NR_HASH (PAGE_SIZE / sizeof(struct hlist_head))
#define HASH_MASK (NR_HASH - 1)
@@ -398,6 +399,7 @@ static void ops_run_io(struct stripe_head *sh)
might_sleep();
+ set_bit(STRIPE_IO_STARTED, &sh->state);
for (i = disks; i--; ) {
int rw;
struct bio *bi;
@@ -1720,6 +1722,9 @@ handle_write_operations5(struct stripe_head *sh, int rcw, int expand)
locked++;
}
}
+ if (locked + 1 == disks)
+ if (!test_and_set_bit(STRIPE_FULL_WRITE, &sh->state))
+ atomic_inc(&sh->raid_conf->pending_full_writes);
} else {
BUG_ON(!(test_bit(R5_UPTODATE, &sh->dev[pd_idx].flags) ||
test_bit(R5_Wantcompute, &sh->dev[pd_idx].flags)));
@@ -1947,6 +1952,9 @@ handle_requests_to_failed_array(raid5_conf_t *conf, struct stripe_head *sh,
STRIPE_SECTORS, 0, 0);
}
+ if (test_and_clear_bit(STRIPE_FULL_WRITE, &sh->state))
+ if (atomic_dec_and_test(&conf->pending_full_writes))
+ md_wakeup_thread(conf->mddev->thread);
}
/* __handle_issuing_new_read_requests5 - returns 0 if there are no more disks
@@ -2149,6 +2157,10 @@ static void handle_completed_write_requests(raid5_conf_t *conf,
0);
}
}
+
+ if (test_and_clear_bit(STRIPE_FULL_WRITE, &sh->state))
+ if (atomic_dec_and_test(&conf->pending_full_writes))
+ md_wakeup_thread(conf->mddev->thread);
}
static void handle_issuing_new_write_requests5(raid5_conf_t *conf,
@@ -2333,6 +2345,9 @@ static void handle_issuing_new_write_requests6(raid5_conf_t *conf,
s->locked++;
set_bit(R5_Wantwrite, &sh->dev[i].flags);
}
+ if (s->locked == disks)
+ if (!test_and_set_bit(STRIPE_FULL_WRITE, &sh->state))
+ atomic_inc(&conf->pending_full_writes);
/* after a RECONSTRUCT_WRITE, the stripe MUST be in-sync */
set_bit(STRIPE_INSYNC, &sh->state);
@@ -3094,6 +3109,8 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
else
continue;
+ set_bit(STRIPE_IO_STARTED, &sh->state);
+
bi = &sh->dev[i].req;
bi->bi_rw = rw;
@@ -3164,7 +3181,7 @@ static void raid5_activate_delayed(raid5_conf_t *conf)
clear_bit(STRIPE_DELAYED, &sh->state);
if (!test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
atomic_inc(&conf->preread_active_stripes);
- list_add_tail(&sh->lru, &conf->handle_list);
+ list_add_tail(&sh->lru, &conf->hold_list);
}
} else
blk_plug_device(conf->mddev->queue);
@@ -3442,6 +3459,58 @@ static int chunk_aligned_read(struct request_queue *q, struct bio * raid_bio)
}
}
+/* __get_priority_stripe - get the next stripe to process
+ *
+ * Full stripe writes are allowed to pass preread active stripes up until
+ * the bypass_threshold is exceeded. In general the bypass_count
+ * increments when the handle_list is handled before the hold_list; however, it
+ * will not be incremented when STRIPE_IO_STARTED is sampled set signifying a
+ * stripe with in flight i/o. The bypass_count will be reset when the
+ * head of the hold_list has changed, i.e. the head was promoted to the
+ * handle_list.
+ */
+static struct stripe_head *__get_priority_stripe(raid5_conf_t *conf)
+{
+ struct stripe_head *sh;
+
+ pr_debug("%s: handle: %s hold: %s full_writes: %d bypass_count: %d\n",
+ __func__,
+ list_empty(&conf->handle_list) ? "empty" : "busy",
+ list_empty(&conf->hold_list) ? "empty" : "busy",
+ atomic_read(&conf->pending_full_writes), conf->bypass_count);
+
+ if (!list_empty(&conf->handle_list)) {
+ sh = list_entry(conf->handle_list.next, typeof(*sh), lru);
+
+ if (list_empty(&conf->hold_list))
+ conf->bypass_count = 0;
+ else if (!test_bit(STRIPE_IO_STARTED, &sh->state)) {
+ if (conf->hold_list.next == conf->last_hold)
+ conf->bypass_count++;
+ else {
+ conf->last_hold = conf->hold_list.next;
+ conf->bypass_count -= conf->bypass_threshold;
+ if (conf->bypass_count < 0)
+ conf->bypass_count = 0;
+ }
+ }
+ } else if (!list_empty(&conf->hold_list) &&
+ ((conf->bypass_threshold &&
+ conf->bypass_count > conf->bypass_threshold) ||
+ atomic_read(&conf->pending_full_writes) == 0)) {
+ sh = list_entry(conf->hold_list.next,
+ typeof(*sh), lru);
+ conf->bypass_count -= conf->bypass_threshold;
+ if (conf->bypass_count < 0)
+ conf->bypass_count = 0;
+ } else
+ return NULL;
+
+ list_del_init(&sh->lru);
+ atomic_inc(&sh->count);
+ BUG_ON(atomic_read(&sh->count) != 1);
+ return sh;
+}
static int make_request(struct request_queue *q, struct bio * bi)
{
@@ -3914,7 +3983,6 @@ static void raid5d(mddev_t *mddev)
handled = 0;
spin_lock_irq(&conf->device_lock);
while (1) {
- struct list_head *first;
struct bio *bio;
if (conf->seq_flush != conf->seq_write) {
@@ -3936,17 +4004,12 @@ static void raid5d(mddev_t *mddev)
handled++;
}
- if (list_empty(&conf->handle_list)) {
+ sh = __get_priority_stripe(conf);
+
+ if (!sh) {
async_tx_issue_pending_all();
break;
}
-
- first = conf->handle_list.next;
- sh = list_entry(first, struct stripe_head, lru);
-
- list_del_init(first);
- atomic_inc(&sh->count);
- BUG_ON(atomic_read(&sh->count)!= 1);
spin_unlock_irq(&conf->device_lock);
handled++;
@@ -4011,6 +4074,42 @@ raid5_stripecache_size = __ATTR(stripe_cache_size, S_IRUGO | S_IWUSR,
raid5_store_stripe_cache_size);
static ssize_t
+raid5_show_preread_threshold(mddev_t *mddev, char *page)
+{
+ raid5_conf_t *conf = mddev_to_conf(mddev);
+ if (conf)
+ return sprintf(page, "%d\n", conf->bypass_threshold);
+ else
+ return 0;
+}
+
+static ssize_t
+raid5_store_preread_threshold(mddev_t *mddev, const char *page, size_t len)
+{
+ raid5_conf_t *conf = mddev_to_conf(mddev);
+ char *end;
+ int new;
+ if (len >= PAGE_SIZE)
+ return -EINVAL;
+ if (!conf)
+ return -ENODEV;
+
+ new = simple_strtoul(page, &end, 10);
+ if (!*page || (*end && *end != '\n'))
+ return -EINVAL;
+ if (new > conf->max_nr_stripes || new < 0)
+ return -EINVAL;
+ conf->bypass_threshold = new;
+ return len;
+}
+
+static struct md_sysfs_entry
+raid5_preread_bypass_threshold = __ATTR(preread_bypass_threshold,
+ S_IRUGO | S_IWUSR,
+ raid5_show_preread_threshold,
+ raid5_store_preread_threshold);
+
+static ssize_t
stripe_cache_active_show(mddev_t *mddev, char *page)
{
raid5_conf_t *conf = mddev_to_conf(mddev);
@@ -4026,6 +4125,7 @@ raid5_stripecache_active = __ATTR_RO(stripe_cache_active);
static struct attribute *raid5_attrs[] = {
&raid5_stripecache_size.attr,
&raid5_stripecache_active.attr,
+ &raid5_preread_bypass_threshold.attr,
NULL,
};
static struct attribute_group raid5_attrs_group = {
@@ -4130,12 +4230,14 @@ static int run(mddev_t *mddev)
init_waitqueue_head(&conf->wait_for_stripe);
init_waitqueue_head(&conf->wait_for_overlap);
INIT_LIST_HEAD(&conf->handle_list);
+ INIT_LIST_HEAD(&conf->hold_list);
INIT_LIST_HEAD(&conf->delayed_list);
INIT_LIST_HEAD(&conf->bitmap_list);
INIT_LIST_HEAD(&conf->inactive_list);
atomic_set(&conf->active_stripes, 0);
atomic_set(&conf->preread_active_stripes, 0);
atomic_set(&conf->active_aligned_reads, 0);
+ conf->bypass_threshold = BYPASS_THRESHOLD;
pr_debug("raid5: run(%s) called.\n", mdname(mddev));
diff --git a/include/linux/raid/raid5.h b/include/linux/raid/raid5.h
index 93678f57ccbe..f0827d31ae6f 100644
--- a/include/linux/raid/raid5.h
+++ b/include/linux/raid/raid5.h
@@ -252,6 +252,8 @@ struct r6_state {
#define STRIPE_EXPANDING 9
#define STRIPE_EXPAND_SOURCE 10
#define STRIPE_EXPAND_READY 11
+#define STRIPE_IO_STARTED 12 /* do not count towards 'bypass_count' */
+#define STRIPE_FULL_WRITE 13 /* all blocks are set to be overwritten */
/*
* Operations flags (in issue order)
*/
@@ -316,12 +318,17 @@ struct raid5_private_data {
int previous_raid_disks;
struct list_head handle_list; /* stripes needing handling */
+ struct list_head hold_list; /* preread ready stripes */
struct list_head delayed_list; /* stripes that have plugged requests */
struct list_head bitmap_list; /* stripes delaying awaiting bitmap update */
struct bio *retry_read_aligned; /* currently retrying aligned bios */
struct bio *retry_read_aligned_list; /* aligned bios retry list */
atomic_t preread_active_stripes; /* stripes with scheduled io */
atomic_t active_aligned_reads;
+ atomic_t pending_full_writes; /* full write backlog */
+ int bypass_count; /* bypassed prereads */
+ int bypass_threshold; /* preread nice */
+ struct list_head *last_hold; /* detect hold_list promotions */
atomic_t reshape_stripes; /* stripes with pending writes for reshape */
/* unfortunately we need two cache names as we temporarily have