summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-03-28 12:34:33 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-03-28 12:34:33 -0700
commit09893ee84591b0417a9186a7e7cf1503ccf99ac2 (patch)
treeda8b044ad157b82203df04ae48cb60f4737cc390
parent4bb2d1009f671815870e8f78e826e4f9071392a7 (diff)
parent7d1206bc2859c6e9f46e35ae697c138e7d7858a7 (diff)
Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull "ARM: More device tree support updates" from Olof Johansson: "This branch contains a number of updates for device tree support on several ARM platforms, in particular: * AT91 continues the device tree conversion adding support for a number of on-chip drivers and other functionality * ux500 adds probing of some of the core SoC blocks through device tree * Initial device tree support for ST SPEAr600 platforms * kirkwood continues the conversion to device-tree probing" Manually merge arch/arm/mach-ux500/Kconfig due to MACH_U8500 rename, and drivers/usb/gadget/at91_udc.c due to header file include cleanups. Also do an "evil merge" for the MACH_U8500 config option rename that the affected RMI4 touchscreen driver in staging. It's called MACH_MOP500 now, and it was missed during previous merges. * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) ARM: SPEAr600: Add device-tree support to SPEAr600 boards ARM: ux500: Provide local timer support for Device Tree ARM: ux500: Enable PL022 SSP Controller in Device Tree ARM: ux500: Enable PL310 Level 2 Cache Controller in Device Tree ARM: ux500: Enable PL011 AMBA UART Controller for Device Tree ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device Tree ARM: ux500: db8500: list most devices in the snowball device tree ARM: ux500: split dts file for snowball into generic part ARM: ux500: combine the board init functions for DT boot ARM: ux500: Initial Device Tree support for Snowball ARM: ux500: CONFIG: Enable Device Tree support for future endeavours ARM: kirkwood: use devicetree for rtc-mv ARM: kirkwood: rtc-mv devicetree bindings ARM: kirkwood: fdt: define uart[01] as disabled, enable uart0 ARM: kirkwood: fdt: facilitate new boards during fdt migration ARM: kirkwood: fdt: absorb kirkwood_init() ARM: kirkwood: fdt: use mrvl ticker symbol ARM: orion: wdt: use resource vice direct access ARM: Kirkwood: Remove tclk from kirkwood_asoc_platform_data. ARM: orion: spi: remove enable_clock_fix which is not used ...
-rw-r--r--Documentation/devicetree/bindings/arm/atmel-at91.txt60
-rw-r--r--Documentation/devicetree/bindings/arm/atmel-pmc.txt11
-rw-r--r--Documentation/devicetree/bindings/arm/spear.txt8
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio_i2c.txt32
-rw-r--r--Documentation/devicetree/bindings/mtd/atmel-nand.txt41
-rw-r--r--Documentation/devicetree/bindings/mtd/nand.txt7
-rw-r--r--Documentation/devicetree/bindings/usb/atmel-usb.txt49
-rw-r--r--Documentation/devicetree/bindings/usb/tegra-usb.txt13
-rw-r--r--arch/arm/boot/dts/at91sam9g20.dtsi63
-rw-r--r--arch/arm/boot/dts/at91sam9g25ek.dts14
-rw-r--r--arch/arm/boot/dts/at91sam9g45.dtsi64
-rw-r--r--arch/arm/boot/dts/at91sam9m10g45ek.dts46
-rw-r--r--arch/arm/boot/dts/at91sam9x5.dtsi88
-rw-r--r--arch/arm/boot/dts/at91sam9x5cm.dtsi45
-rw-r--r--arch/arm/boot/dts/db8500.dtsi275
-rw-r--r--arch/arm/boot/dts/kirkwood-dreamplug.dts13
-rw-r--r--arch/arm/boot/dts/kirkwood.dtsi34
-rw-r--r--arch/arm/boot/dts/snowball.dts139
-rw-r--r--arch/arm/boot/dts/spear600-evb.dts47
-rw-r--r--arch/arm/boot/dts/spear600.dtsi174
-rw-r--r--arch/arm/boot/dts/tegra-seaboard.dts1
-rw-r--r--arch/arm/boot/dts/tegra20.dtsi1
-rw-r--r--arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi96
-rw-r--r--arch/arm/boot/dts/usb_a9g20.dts74
-rw-r--r--arch/arm/configs/at91sam9g20_defconfig3
-rw-r--r--arch/arm/configs/u8500_defconfig1
-rw-r--r--arch/arm/mach-at91/Kconfig10
-rw-r--r--arch/arm/mach-at91/at91sam9260.c1
-rw-r--r--arch/arm/mach-at91/at91sam9g45.c2
-rw-r--r--arch/arm/mach-at91/at91sam9x5.c17
-rw-r--r--arch/arm/mach-at91/board-afeb-9260v1.c1
-rw-r--r--arch/arm/mach-at91/board-cam60.c1
-rw-r--r--arch/arm/mach-at91/board-cpu9krea.c1
-rw-r--r--arch/arm/mach-at91/board-dt.c57
-rw-r--r--arch/arm/mach-at91/board-kb9202.c1
-rw-r--r--arch/arm/mach-at91/board-neocore926.c1
-rw-r--r--arch/arm/mach-at91/board-qil-a9260.c2
-rw-r--r--arch/arm/mach-at91/board-rm9200dk.c2
-rw-r--r--arch/arm/mach-at91/board-sam9-l9260.c1
-rw-r--r--arch/arm/mach-at91/board-sam9260ek.c2
-rw-r--r--arch/arm/mach-at91/board-sam9261ek.c2
-rw-r--r--arch/arm/mach-at91/board-sam9263ek.c2
-rw-r--r--arch/arm/mach-at91/board-sam9g20ek.c2
-rw-r--r--arch/arm/mach-at91/board-sam9m10g45ek.c2
-rw-r--r--arch/arm/mach-at91/board-sam9rlek.c2
-rw-r--r--arch/arm/mach-at91/board-snapper9260.c1
-rw-r--r--arch/arm/mach-at91/board-stamp9g20.c1
-rw-r--r--arch/arm/mach-at91/board-usb-a926x.c2
-rw-r--r--arch/arm/mach-at91/board-yl-9200.c1
-rw-r--r--arch/arm/mach-at91/clock.c56
-rw-r--r--arch/arm/mach-at91/generic.h2
-rw-r--r--arch/arm/mach-at91/include/mach/at91_shdwc.h4
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9x5.h5
-rw-r--r--arch/arm/mach-at91/include/mach/board.h15
-rw-r--r--arch/arm/mach-at91/pm.c13
-rw-r--r--arch/arm/mach-at91/setup.c158
-rw-r--r--arch/arm/mach-kirkwood/Makefile1
-rw-r--r--arch/arm/mach-kirkwood/board-dreamplug.c152
-rw-r--r--arch/arm/mach-kirkwood/board-dt.c151
-rw-r--r--arch/arm/mach-kirkwood/common.c11
-rw-r--r--arch/arm/mach-kirkwood/common.h15
-rw-r--r--arch/arm/mach-spear6xx/Kconfig7
-rw-r--r--arch/arm/mach-spear6xx/Makefile6
-rw-r--r--arch/arm/mach-spear6xx/clock.c14
-rw-r--r--arch/arm/mach-spear6xx/spear600.c25
-rw-r--r--arch/arm/mach-spear6xx/spear600_evb.c54
-rw-r--r--arch/arm/mach-spear6xx/spear6xx.c132
-rw-r--r--arch/arm/mach-ux500/Kconfig6
-rw-r--r--arch/arm/mach-ux500/Makefile.boot1
-rw-r--r--arch/arm/mach-ux500/board-mop500.c99
-rw-r--r--arch/arm/mach-ux500/cache-l2x0.c7
-rw-r--r--arch/arm/mach-ux500/cpu.c14
-rw-r--r--arch/arm/mach-ux500/timer.c11
-rw-r--r--arch/arm/plat-orion/common.c7
-rw-r--r--arch/arm/plat-orion/include/plat/audio.h1
-rw-r--r--arch/avr32/boards/atngw100/setup.c1
-rw-r--r--arch/avr32/boards/atstk1000/atstk1002.c1
-rw-r--r--arch/avr32/mach-at32ap/include/mach/board.h13
-rw-r--r--drivers/i2c/busses/i2c-gpio.c98
-rw-r--r--drivers/mtd/nand/atmel_nand.c136
-rw-r--r--drivers/of/Kconfig4
-rw-r--r--drivers/of/Makefile1
-rw-r--r--drivers/of/of_mtd.c85
-rw-r--r--drivers/rtc/rtc-mv.c9
-rw-r--r--drivers/spi/spi-orion.c5
-rw-r--r--drivers/staging/ste_rmi4/Makefile2
-rw-r--r--drivers/usb/Kconfig2
-rw-r--r--drivers/usb/gadget/Kconfig2
-rw-r--r--drivers/usb/gadget/at91_udc.c40
-rw-r--r--drivers/usb/host/ehci-atmel.c24
-rw-r--r--drivers/usb/host/ohci-at91.c101
-rw-r--r--drivers/watchdog/orion_wdt.c24
-rw-r--r--include/linux/of.h16
-rw-r--r--include/linux/of_mtd.h19
-rw-r--r--include/linux/platform_data/atmel.h27
-rw-r--r--include/linux/spi/orion_spi.h1
96 files changed, 2536 insertions, 555 deletions
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
index 1aeaf6f2a1ba..ecc81e368715 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -30,3 +30,63 @@ One interrupt per TC channel in a TC block:
reg = <0xfffdc000 0x100>;
interrupts = <26 4 27 4 28 4>;
};
+
+RSTC Reset Controller required properties:
+- compatible: Should be "atmel,<chip>-rstc".
+ <chip> can be "at91sam9260" or "at91sam9g45"
+- reg: Should contain registers location and length
+
+Example:
+
+ rstc@fffffd00 {
+ compatible = "atmel,at91sam9260-rstc";
+ reg = <0xfffffd00 0x10>;
+ };
+
+RAMC SDRAM/DDR Controller required properties:
+- compatible: Should be "atmel,at91sam9260-sdramc",
+ "atmel,at91sam9g45-ddramc",
+- reg: Should contain registers location and length
+ For at91sam9263 and at91sam9g45 you must specify 2 entries.
+
+Examples:
+
+ ramc0: ramc@ffffe800 {
+ compatible = "atmel,at91sam9g45-ddramc";
+ reg = <0xffffe800 0x200>;
+ };
+
+ ramc0: ramc@ffffe400 {
+ compatible = "atmel,at91sam9g45-ddramc";
+ reg = <0xffffe400 0x200
+ 0xffffe600 0x200>;
+ };
+
+SHDWC Shutdown Controller
+
+required properties:
+- compatible: Should be "atmel,<chip>-shdwc".
+ <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
+- reg: Should contain registers location and length
+
+optional properties:
+- atmel,wakeup-mode: String, operation mode of the wakeup mode.
+ Supported values are: "none", "high", "low", "any".
+- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
+
+optional at91sam9260 properties:
+- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
+
+optional at91sam9rl properties:
+- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
+- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
+
+optional at91sam9x5 properties:
+- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
+
+Example:
+
+ rstc@fffffd00 {
+ compatible = "atmel,at91sam9260-rstc";
+ reg = <0xfffffd00 0x10>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/atmel-pmc.txt b/Documentation/devicetree/bindings/arm/atmel-pmc.txt
new file mode 100644
index 000000000000..389bed5056e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/atmel-pmc.txt
@@ -0,0 +1,11 @@
+* Power Management Controller (PMC)
+
+Required properties:
+- compatible: Should be "atmel,at91rm9200-pmc"
+- reg: Should contain PMC registers location and length
+
+Examples:
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91rm9200-pmc";
+ reg = <0xfffffc00 0x100>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/spear.txt b/Documentation/devicetree/bindings/arm/spear.txt
new file mode 100644
index 000000000000..f8e54f092328
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/spear.txt
@@ -0,0 +1,8 @@
+ST SPEAr Platforms Device Tree Bindings
+---------------------------------------
+
+Boards with the ST SPEAr600 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "st,spear600";
diff --git a/Documentation/devicetree/bindings/gpio/gpio_i2c.txt b/Documentation/devicetree/bindings/gpio/gpio_i2c.txt
new file mode 100644
index 000000000000..4f8ec947c6bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio_i2c.txt
@@ -0,0 +1,32 @@
+Device-Tree bindings for i2c gpio driver
+
+Required properties:
+ - compatible = "i2c-gpio";
+ - gpios: sda and scl gpio
+
+
+Optional properties:
+ - i2c-gpio,sda-open-drain: sda as open drain
+ - i2c-gpio,scl-open-drain: scl as open drain
+ - i2c-gpio,scl-output-only: scl as output only
+ - i2c-gpio,delay-us: delay between GPIO operations (may depend on each platform)
+ - i2c-gpio,timeout-ms: timeout to get data
+
+Example nodes:
+
+i2c@0 {
+ compatible = "i2c-gpio";
+ gpios = <&pioA 23 0 /* sda */
+ &pioA 24 0 /* scl */
+ >;
+ i2c-gpio,sda-open-drain;
+ i2c-gpio,scl-open-drain;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rv3029c2@56 {
+ compatible = "rv3029c2";
+ reg = <0x56>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
new file mode 100644
index 000000000000..5903ecf6e895
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
@@ -0,0 +1,41 @@
+Atmel NAND flash
+
+Required properties:
+- compatible : "atmel,at91rm9200-nand".
+- reg : should specify localbus address and size used for the chip,
+ and if availlable the ECC.
+- atmel,nand-addr-offset : offset for the address latch.
+- atmel,nand-cmd-offset : offset for the command latch.
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+ representing partitions.
+
+- gpios : specifies the gpio pins to control the NAND device. detect is an
+ optional gpio and may be set to 0 if not present.
+
+Optional properties:
+- nand-ecc-mode : String, operation mode of the NAND ecc mode, soft by default.
+ Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first",
+ "soft_bch".
+- nand-bus-width : 8 or 16 bus width if not present 8
+- nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
+
+Examples:
+nand0: nand@40000000,0 {
+ compatible = "atmel,at91rm9200-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x40000000 0x10000000
+ 0xffffe800 0x200
+ >;
+ atmel,nand-addr-offset = <21>;
+ atmel,nand-cmd-offset = <22>;
+ nand-on-flash-bbt;
+ nand-ecc-mode = "soft";
+ gpios = <&pioC 13 0
+ &pioC 14 0
+ 0
+ >;
+ partition@0 {
+ ...
+ };
+};
diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt
new file mode 100644
index 000000000000..03855c8c492a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/nand.txt
@@ -0,0 +1,7 @@
+* MTD generic binding
+
+- nand-ecc-mode : String, operation mode of the NAND ecc mode.
+ Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first",
+ "soft_bch".
+- nand-bus-width : 8 or 16 bus width if not present 8
+- nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
new file mode 100644
index 000000000000..60bd2150a3e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -0,0 +1,49 @@
+Atmel SOC USB controllers
+
+OHCI
+
+Required properties:
+ - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
+ used in host mode.
+ - num-ports: Number of ports.
+ - atmel,vbus-gpio: If present, specifies a gpio that needs to be
+ activated for the bus to be powered.
+ - atmel,oc-gpio: If present, specifies a gpio that needs to be
+ activated for the overcurrent detection.
+
+usb0: ohci@00500000 {
+ compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+ reg = <0x00500000 0x100000>;
+ interrupts = <20 4>;
+ num-ports = <2>;
+};
+
+EHCI
+
+Required properties:
+ - compatible: Should be "atmel,at91sam9g45-ehci" for USB controllers
+ used in host mode.
+
+usb1: ehci@00800000 {
+ compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+ reg = <0x00800000 0x100000>;
+ interrupts = <22 4>;
+};
+
+AT91 USB device controller
+
+Required properties:
+ - compatible: Should be "atmel,at91rm9200-udc"
+ - reg: Address and length of the register set for the device
+ - interrupts: Should contain macb interrupt
+
+Optional properties:
+ - atmel,vbus-gpio: If present, specifies a gpio that needs to be
+ activated for the bus to be powered.
+
+usb1: gadget@fffa4000 {
+ compatible = "atmel,at91rm9200-udc";
+ reg = <0xfffa4000 0x4000>;
+ interrupts = <10 4>;
+ atmel,vbus-gpio = <&pioC 5 0>;
+};
diff --git a/Documentation/devicetree/bindings/usb/tegra-usb.txt b/Documentation/devicetree/bindings/usb/tegra-usb.txt
index 035d63d5646d..007005ddbe12 100644
--- a/Documentation/devicetree/bindings/usb/tegra-usb.txt
+++ b/Documentation/devicetree/bindings/usb/tegra-usb.txt
@@ -11,3 +11,16 @@ Required properties :
- phy_type : Should be one of "ulpi" or "utmi".
- nvidia,vbus-gpio : If present, specifies a gpio that needs to be
activated for the bus to be powered.
+
+Optional properties:
+ - dr_mode : dual role mode. Indicates the working mode for
+ nvidia,tegra20-ehci compatible controllers. Can be "host", "peripheral",
+ or "otg". Default to "host" if not defined for backward compatibility.
+ host means this is a host controller
+ peripheral means it is device controller
+ otg means it can operate as either ("on the go")
+ - nvidia,has-legacy-mode : boolean indicates whether this controller can
+ operate in legacy mode (as APX 2500 / 2600). In legacy mode some
+ registers are accessed through the APB_MISC base address instead of
+ the USB controller. Since this is a legacy issue it probably does not
+ warrant a compatible string of its own.
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index a100db03ec90..92f36627e7f8 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -59,6 +59,26 @@
reg = <0xfffff000 0x200>;
};
+ ramc0: ramc@ffffea00 {
+ compatible = "atmel,at91sam9260-sdramc";
+ reg = <0xffffea00 0x200>;
+ };
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91rm9200-pmc";
+ reg = <0xfffffc00 0x100>;
+ };
+
+ rstc@fffffd00 {
+ compatible = "atmel,at91sam9260-rstc";
+ reg = <0xfffffd00 0x10>;
+ };
+
+ shdwc@fffffd10 {
+ compatible = "atmel,at91sam9260-shdwc";
+ reg = <0xfffffd10 0x10>;
+ };
+
pit: timer@fffffd30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
@@ -171,6 +191,49 @@
interrupts = <21 4>;
status = "disabled";
};
+
+ usb1: gadget@fffa4000 {
+ compatible = "atmel,at91rm9200-udc";
+ reg = <0xfffa4000 0x4000>;
+ interrupts = <10 4>;
+ status = "disabled";
+ };
+ };
+
+ nand0: nand@40000000 {
+ compatible = "atmel,at91rm9200-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x40000000 0x10000000
+ 0xffffe800 0x200
+ >;
+ atmel,nand-addr-offset = <21>;
+ atmel,nand-cmd-offset = <22>;
+ gpios = <&pioC 13 0
+ &pioC 14 0
+ 0
+ >;
+ status = "disabled";
};
+
+ usb0: ohci@00500000 {
+ compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+ reg = <0x00500000 0x100000>;
+ interrupts = <20 4>;
+ status = "disabled";
+ };
+ };
+
+ i2c@0 {
+ compatible = "i2c-gpio";
+ gpios = <&pioA 23 0 /* sda */
+ &pioA 24 0 /* scl */
+ >;
+ i2c-gpio,sda-open-drain;
+ i2c-gpio,scl-open-drain;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index e64eb932083b..ac0dc0031dda 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -15,7 +15,7 @@
compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
chosen {
- bootargs = "128M console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+ bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
};
ahb {
@@ -33,5 +33,17 @@
status = "okay";
};
};
+
+ usb0: ohci@00600000 {
+ status = "okay";
+ num-ports = <2>;
+ atmel,vbus-gpio = <&pioD 19 0
+ &pioD 20 0
+ >;
+ };
+
+ usb1: ehci@00700000 {
+ status = "okay";
+ };
};
};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index f779667159b1..3d0c32fb218f 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -60,6 +60,22 @@
reg = <0xfffff000 0x200>;
};
+ ramc0: ramc@ffffe400 {
+ compatible = "atmel,at91sam9g45-ddramc";
+ reg = <0xffffe400 0x200
+ 0xffffe600 0x200>;
+ };
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91rm9200-pmc";
+ reg = <0xfffffc00 0x100>;
+ };
+
+ rstc@fffffd00 {
+ compatible = "atmel,at91sam9g45-rstc";
+ reg = <0xfffffd00 0x10>;
+ };
+
pit: timer@fffffd30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
@@ -67,6 +83,11 @@
};
+ shdwc@fffffd10 {
+ compatible = "atmel,at91sam9rl-shdwc";
+ reg = <0xfffffd10 0x10>;
+ };
+
tcb0: timer@fff7c000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfff7c000 0x100>;
@@ -180,5 +201,48 @@
status = "disabled";
};
};
+
+ nand0: nand@40000000 {
+ compatible = "atmel,at91rm9200-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x40000000 0x10000000
+ 0xffffe200 0x200
+ >;
+ atmel,nand-addr-offset = <21>;
+ atmel,nand-cmd-offset = <22>;
+ gpios = <&pioC 8 0
+ &pioC 14 0
+ 0
+ >;
+ status = "disabled";
+ };
+
+ usb0: ohci@00700000 {
+ compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+ reg = <0x00700000 0x100000>;
+ interrupts = <22 4>;
+ status = "disabled";
+ };
+
+ usb1: ehci@00800000 {
+ compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+ reg = <0x00800000 0x100000>;
+ interrupts = <22 4>;
+ status = "disabled";
+ };
+ };
+
+ i2c@0 {
+ compatible = "i2c-gpio";
+ gpios = <&pioA 20 0 /* sda */
+ &pioA 21 0 /* scl */
+ >;
+ i2c-gpio,sda-open-drain;
+ i2c-gpio,scl-open-drain;
+ i2c-gpio,delay-us = <5>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 15e25f903cad..c4c8ae4123d5 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -14,13 +14,24 @@
compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
chosen {
- bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:4M(bootstrap/uboot/kernel)ro,60M(rootfs),-(data) root=/dev/mtdblock1 rw rootfstype=jffs2";
+ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
};
memory@70000000 {
reg = <0x70000000 0x4000000>;
};
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+ };
+
ahb {
apb {
dbgu: serial@ffffee00 {
@@ -36,6 +47,39 @@
status = "okay";
};
};
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ boot@0 {
+ label = "bootstrap/uboot/kernel";
+ reg = <0x0 0x400000>;
+ };
+
+ rootfs@400000 {
+ label = "rootfs";
+ reg = <0x400000 0x3C00000>;
+ };
+
+ data@4000000 {
+ label = "data";
+ reg = <0x4000000 0xC000000>;
+ };
+ };
+
+ usb0: ohci@00700000 {
+ status = "okay";
+ num-ports = <2>;
+ atmel,vbus-gpio = <&pioD 1 0
+ &pioD 3 0>;
+ };
+
+ usb1: ehci@00800000 {
+ status = "okay";
+ };
};
leds {
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index a02e636d8a57..c111001f254e 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -58,6 +58,26 @@
reg = <0xfffff000 0x200>;
};
+ ramc0: ramc@ffffe800 {
+ compatible = "atmel,at91sam9g45-ddramc";
+ reg = <0xffffe800 0x200>;
+ };
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91rm9200-pmc";
+ reg = <0xfffffc00 0x100>;
+ };
+
+ rstc@fffffe00 {
+ compatible = "atmel,at91sam9g45-rstc";
+ reg = <0xfffffe00 0x10>;
+ };
+
+ shdwc@fffffe10 {
+ compatible = "atmel,at91sam9x5-shdwc";
+ reg = <0xfffffe10 0x10>;
+ };
+
pit: timer@fffffe30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe30 0xf>;
@@ -172,5 +192,73 @@
status = "disabled";
};
};
+
+ nand0: nand@40000000 {
+ compatible = "atmel,at91rm9200-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x40000000 0x10000000
+ >;
+ atmel,nand-addr-offset = <21>;
+ atmel,nand-cmd-offset = <22>;
+ gpios = <&pioC 8 0
+ &pioC 14 0
+ 0
+ >;
+ status = "disabled";
+ };
+
+ usb0: ohci@00600000 {
+ compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+ reg = <0x00600000 0x100000>;
+ interrupts = <22 4>;
+ status = "disabled";
+ };
+
+ usb1: ehci@00700000 {
+ compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+ reg = <0x00700000 0x100000>;
+ interrupts = <22 4>;
+ status = "disabled";
+ };
+ };
+
+ i2c@0 {
+ compatible = "i2c-gpio";
+ gpios = <&pioA 30 0 /* sda */
+ &pioA 31 0 /* scl */
+ >;
+ i2c-gpio,sda-open-drain;
+ i2c-gpio,scl-open-drain;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c@1 {
+ compatible = "i2c-gpio";
+ gpios = <&pioC 0 0 /* sda */
+ &pioC 1 0 /* scl */
+ >;
+ i2c-gpio,sda-open-drain;
+ i2c-gpio,scl-open-drain;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c@2 {
+ compatible = "i2c-gpio";
+ gpios = <&pioB 4 0 /* sda */
+ &pioB 5 0 /* scl */
+ >;
+ i2c-gpio,sda-open-drain;
+ i2c-gpio,scl-open-drain;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
index 64ae3e890259..67936f83c694 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -12,6 +12,51 @@
reg = <0x20000000 0x8000000>;
};
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ uboot@40000 {
+ label = "u-boot";
+ reg = <0x40000 0x80000>;
+ };
+
+ ubootenv@c0000 {
+ label = "U-Boot Env";
+ reg = <0xc0000 0x140000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x1f800000>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi
new file mode 100644
index 000000000000..d73dce645667
--- /dev/null
+++ b/arch/arm/boot/dts/db8500.dtsi
@@ -0,0 +1,275 @@
+/*
+ * Copyright 2012 Linaro Ltd
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ soc-u9500 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "stericsson,db8500";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ intc: interrupt-controller@a0411000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ interrupt-parent;
+ reg = <0xa0411000 0x1000>,
+ <0xa0410100 0x100>;
+ };
+
+ L2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0xa0412000 0x1000>;
+ interrupts = <0 13 4>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <0 7 0x4>;
+ };
+
+ timer@a0410600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xa0410600 0x20>;
+ interrupts = <1 13 0x304>;
+ };
+
+ rtc@80154000 {
+ compatible = "stericsson,db8500-rtc";
+ reg = <0x80154000 0x1000>;
+ interrupts = <0 18 0x4>;
+ };
+
+ gpio0: gpio@8012e000 {
+ compatible = "stericsson,db8500-gpio",
+ "stmicroelectronics,nomadik-gpio";
+ reg = <0x8012e000 0x80>;
+ interrupts = <0 119 0x4>;
+ supports-sleepmode;
+ gpio-controller;
+ };
+
+ gpio1: gpio@8012e080 {
+ compatible = "stericsson,db8500-gpio",
+ "stmicroelectronics,nomadik-gpio";
+ reg = <0x8012e080 0x80>;
+ interrupts = <0 120 0x4>;
+ supports-sleepmode;
+ gpio-controller;
+ };
+
+ gpio2: gpio@8000e000 {
+ compatible = "stericsson,db8500-gpio",
+ "stmicroelectronics,nomadik-gpio";
+ reg = <0x8000e000 0x80>;
+ interrupts = <0 121 0x4>;
+ supports-sleepmode;
+ gpio-controller;
+ };
+
+ gpio3: gpio@8000e080 {
+ compatible = "stericsson,db8500-gpio",
+ "stmicroelectronics,nomadik-gpio";
+ reg = <0x8000e080 0x80>;
+ interrupts = <0 122 0x4>;
+ supports-sleepmode;
+ gpio-controller;
+ };
+
+ gpio4: gpio@8000e100 {
+ compatible = "stericsson,db8500-gpio",
+ "stmicroelectronics,nomadik-gpio";
+ reg = <0x8000e100 0x80>;
+ interrupts = <0 123 0x4>;
+ supports-sleepmode;
+ gpio-controller;
+ };
+
+ gpio5: gpio@8000e180 {
+ compatible = "stericsson,db8500-gpio",
+ "stmicroelectronics,nomadik-gpio";
+ reg = <0x8000e180 0x80>;
+ interrupts = <0 124 0x4>;
+ supports-sleepmode;
+ gpio-controller;
+ };
+
+ gpio6: gpio@8011e000 {
+ compatible = "stericsson,db8500-gpio",
+ "stmicroelectronics,nomadik-gpio";
+ reg = <0x8011e000 0x80>;
+ interrupts = <0 125 0x4>;
+ supports-sleepmode;
+ gpio-controller;
+ };
+
+ gpio7: gpio@8011e080 {
+ compatible = "stericsson,db8500-gpio",
+ "stmicroelectronics,nomadik-gpio";
+ reg = <0x8011e080 0x80>;
+ interrupts = <0 126 0x4>;
+ supports-sleepmode;
+ gpio-controller;
+ };
+
+ gpio8: gpio@a03fe000 {
+ compatible = "stericsson,db8500-gpio",
+ "stmicroelectronics,nomadik-gpio";
+ reg = <0xa03fe000 0x80>;
+ interrupts = <0 127 0x4>;
+ supports-sleepmode;
+ gpio-controller;
+ };
+
+ usb@a03e0000 {
+ compatible = "stericsson,db8500-musb",
+ "mentor,musb";
+ reg = <0xa03e0000 0x10000>;
+ interrupts = <0 23 0x4>;
+ };
+
+ dma-controller@801C0000 {
+ compatible = "stericsson,db8500-dma40",
+ "stericsson,dma40";
+ reg = <0x801C0000 0x1000 0x40010000 0x800>;
+ interrupts = <0 25 0x4>;
+ };
+
+ prcmu@80157000 {
+ compatible = "stericsson,db8500-prcmu";
+ reg = <0x80157000 0x1000>;
+ interrupts = <46 47>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ab8500@5 {
+ compatible = "stericsson,ab8500";
+ reg = <5>; /* mailbox 5 is i2c */
+ interrupts = <0 40 0x4>;
+ };
+ };
+
+ i2c@80004000 {
+ compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+ reg = <0x80004000 0x1000>;
+ interrupts = <0 21 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@80122000 {
+ compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+ reg = <0x80122000 0x1000>;
+ interrupts = <0 22 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@80128000 {
+ compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+ reg = <0x80128000 0x1000>;
+ interrupts = <0 55 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@80110000 {
+ compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+ reg = <0x80110000 0x1000>;
+ interrupts = <0 12 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@8012a000 {
+ compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+ reg = <0x8012a000 0x1000>;
+ interrupts = <0 51 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ssp@80002000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <80002000 0x1000>;
+ interrupts = <0 14 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ // Add one of these for each child device
+ cs-gpios = <&gpio0 31 &gpio4 14 &gpio4 16 &gpio6 22 &gpio7 0>;
+
+ };
+
+ uart@80120000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80120000 0x1000>;
+ interrupts = <0 11 0x4>;
+ status = "disabled";
+ };
+ uart@80121000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80121000 0x1000>;
+ interrupts = <0 19 0x4>;
+ status = "disabled";
+ };
+ uart@80007000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80007000 0x1000>;
+ interrupts = <0 26 0x4>;
+ status = "disabled";
+ };
+
+ sdi@80126000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x80126000 0x1000>;
+ interrupts = <0 60 0x4>;
+ status = "disabled";
+ };
+ sdi@80118000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x80118000 0x1000>;
+ interrupts = <0 50 0x4>;
+ status = "disabled";
+ };
+ sdi@80005000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x80005000 0x1000>;
+ interrupts = <0 41 0x4>;
+ status = "disabled";
+ };
+ sdi@80119000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x80119000 0x1000>;
+ interrupts = <0 59 0x4>;
+ status = "disabled";
+ };
+ sdi@80114000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x80114000 0x1000>;
+ interrupts = <0 99 0x4>;
+ status = "disabled";
+ };
+ sdi@80008000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x80114000 0x1000>;
+ interrupts = <0 100 0x4>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
index 8a5dff807b45..a5376b84227f 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -4,7 +4,7 @@
/ {
model = "Globalscale Technologies Dreamplug";
- compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
memory {
device_type = "memory";
@@ -15,11 +15,10 @@
bootargs = "console=ttyS0,115200n8 earlyprintk";
};
- serial@f1012000 {
- compatible = "ns16550a";
- reg = <0xf1012000 0xff>;
- reg-shift = <2>;
- interrupts = <33>;
- clock-frequency = <200000000>;
+ ocp@f1000000 {
+ serial@12000 {
+ clock-frequency = <200000000>;
+ status = "ok";
+ };
};
};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 771c6bbeb29a..3474ef890945 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -1,6 +1,36 @@
/include/ "skeleton.dtsi"
/ {
- compatible = "marvell,kirkwood";
-};
+ compatible = "mrvl,kirkwood";
+
+ ocp@f1000000 {
+ compatible = "simple-bus";
+ ranges = <0 0xf1000000 0x1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ serial@12000 {
+ compatible = "ns16550a";
+ reg = <0x12000 0x100>;
+ reg-shift = <2>;
+ interrupts = <33>;
+ /* set clock-frequency in board dts */
+ status = "disabled";
+ };
+ serial@12100 {
+ compatible = "ns16550a";
+ reg = <0x12100 0x100>;
+ reg-shift = <2>;
+ interrupts = <34>;
+ /* set clock-frequency in board dts */
+ status = "disabled";
+ };
+
+ rtc@10300 {
+ compatible = "mrvl,kirkwood-rtc", "mrvl,orion-rtc";
+ reg = <0x10300 0x20>;
+ interrupts = <53>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
new file mode 100644
index 000000000000..359c6d679156
--- /dev/null
+++ b/arch/arm/boot/dts/snowball.dts
@@ -0,0 +1,139 @@
+/*
+ * Copyright 2011 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "db8500.dtsi"
+
+/ {
+ model = "Calao Systems Snowball platform with device tree";
+ compatible = "calaosystems,snowball-a9500";
+
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@1 {
+ debounce_interval = <50>;
+ wakeup = <1>;
+ linux,code = <2>;
+ label = "userpb";
+ gpios = <&gpio1 0>;
+ };
+ button@2 {
+ debounce_interval = <50>;
+ wakeup = <1>;
+ linux,code = <3>;
+ label = "userpb";
+ gpios = <&gpio4 23>;
+ };
+ button@3 {
+ debounce_interval = <50>;
+ wakeup = <1>;
+ linux,code = <4>;
+ label = "userpb";
+ gpios = <&gpio4 23>;
+ };
+ button@4 {
+ debounce_interval = <50>;
+ wakeup = <1>;
+ linux,code = <5>;
+ label = "userpb";
+ gpios = <&gpio5 1>;
+ };
+ button@5 {
+ debounce_interval = <50>;
+ wakeup = <1>;
+ linux,code = <6>;
+ label = "userpb";
+ gpios = <&gpio5 2>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ used-led {
+ label = "user_led";
+ gpios = <&gpio4 14>;
+ };
+ };
+
+ soc-u9500 {
+
+ external-bus@50000000 {
+ compatible = "simple-bus";
+ reg = <0x50000000 0x10000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ethernet@50000000 {
+ compatible = "smsc,9111";
+ reg = <0x50000000 0x10000>;
+ interrupts = <12>;
+ interrupt-parent = <&gpio4>;
+ };
+ };
+
+ sdi@80126000 {
+ status = "enabled";
+ cd-gpios = <&gpio6 26>;
+ };
+
+ sdi@80114000 {
+ status = "enabled";
+ };
+
+ uart@80120000 {
+ status = "okay";
+ };
+
+ uart@80121000 {
+ status = "okay";
+ };
+
+ uart@80007000 {
+ status = "okay";
+ };
+
+ i2c@80004000 {
+ tc3589x@42 {
+ //compatible = "tc3589x";
+ reg = <0x42>;
+ interrupts = <25>;
+ interrupt-parent = <&gpio6>;
+ };
+ tps61052@33 {
+ //compatible = "tps61052";
+ reg = <0x33>;
+ };
+ };
+
+ i2c@80128000 {
+ lp5521@0x33 {
+ // compatible = "lp5521";
+ reg = <0x33>;
+ };
+ lp5521@0x34 {
+ // compatible = "lp5521";
+ reg = <0x34>;
+ };
+ bh1780@0x29 {
+ // compatible = "rohm,bh1780gli";
+ reg = <0x33>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear600-evb.dts b/arch/arm/boot/dts/spear600-evb.dts
new file mode 100644
index 000000000000..636292e18c90
--- /dev/null
+++ b/arch/arm/boot/dts/spear600-evb.dts
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear600.dtsi"
+
+/ {
+ model = "ST SPEAr600 Evaluation Board";
+ compatible = "st,spear600-evb", "st,spear600";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x10000000>;
+ };
+
+ ahb {
+ gmac: ethernet@e0800000 {
+ phy-mode = "gmii";
+ status = "okay";
+ };
+
+ apb {
+ serial@d0000000 {
+ status = "okay";
+ };
+
+ serial@d0080000 {
+ status = "okay";
+ };
+
+ i2c@d0200000 {
+ clock-frequency = <400000>;
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi
new file mode 100644
index 000000000000..ebe0885a2b98
--- /dev/null
+++ b/arch/arm/boot/dts/spear600.dtsi
@@ -0,0 +1,174 @@
+/*
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "st,spear600";
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x40000000>;
+ };
+
+ ahb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+ vic0: interrupt-controller@f1100000 {
+ compatible = "arm,pl190-vic";
+ interrupt-controller;
+ reg = <0xf1100000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ vic1: interrupt-controller@f1000000 {
+ compatible = "arm,pl190-vic";
+ interrupt-controller;
+ reg = <0xf1000000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ gmac: ethernet@e0800000 {
+ compatible = "st,spear600-gmac";
+ reg = <0xe0800000 0x8000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <24 23>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ status = "disabled";
+ };
+
+ fsmc: flash@d1800000 {
+ compatible = "st,spear600-fsmc-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xd1800000 0x1000 /* FSMC Register */
+ 0xd2000000 0x4000>; /* NAND Base */
+ reg-names = "fsmc_regs", "nand_data";
+ st,ale-off = <0x20000>;
+ st,cle-off = <0x10000>;
+ status = "disabled";
+ };
+
+ smi: flash@fc000000 {
+ compatible = "st,spear600-smi";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xfc000000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <12>;
+ status = "disabled";
+ };
+
+ ehci@e1800000 {
+ compatible = "st,spear600-ehci", "usb-ehci";
+ reg = <0xe1800000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <27>;
+ status = "disabled";
+ };
+
+ ehci@e2000000 {
+ compatible = "st,spear600-ehci", "usb-ehci";
+ reg = <0xe2000000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <29>;
+ status = "disabled";
+ };
+
+ ohci@e1900000 {
+ compatible = "st,spear600-ohci", "usb-ohci";
+ reg = <0xe1900000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <26>;
+ status = "disabled";
+ };
+
+ ohci@e2100000 {
+ compatible = "st,spear600-ohci", "usb-ohci";
+ reg = <0xe2100000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <28>;
+ status = "disabled";
+ };
+
+ apb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+ serial@d0000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xd0000000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <24>;
+ status = "disabled";
+ };
+
+ serial@d0080000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xd0080000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <25>;
+ status = "disabled";
+ };
+
+ /* local/cpu GPIO */
+ gpio0: gpio@f0100000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xf0100000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <18>;
+ };
+
+ /* basic GPIO */
+ gpio1: gpio@fc980000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xfc980000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <19>;
+ };
+
+ /* appl GPIO */
+ gpio2: gpio@d8100000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xd8100000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <4>;
+ };
+
+ i2c@d0200000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xd0200000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <28>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
index 876d5c92ce36..dbf1c5a171c2 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -112,6 +112,7 @@
usb@c5000000 {
nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */
+ dr_mode = "otg";
};
gpio-keys {
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index aff8a175aa40..108e894a8926 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -190,6 +190,7 @@
reg = <0xc5000000 0x4000>;
interrupts = < 0 20 0x04 >;
phy_type = "utmi";
+ nvidia,has-legacy-mode;
};
usb@c5004000 {
diff --git a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi
new file mode 100644
index 000000000000..ad3eca17c436
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi
@@ -0,0 +1,96 @@
+/*
+ * calao-dab-mmx.dtsi - Device Tree Include file for Calao DAB-MMX Daughter Board
+ *
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/ {
+ ahb {
+ apb {
+ usart1: serial@fffb4000 {
+ status = "okay";
+ };
+
+ usart3: serial@fffd0000 {
+ status = "okay";
+ };
+ };
+ };
+
+ i2c-gpio@0 {
+ status = "okay";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user_led1 {
+ label = "user_led1";
+ gpios = <&pioB 20 1>;
+ };
+
+/*
+* led already used by mother board but active as high
+* user_led2 {
+* label = "user_led2";
+* gpios = <&pioB 21 1>;
+* };
+*/
+ user_led3 {
+ label = "user_led3";
+ gpios = <&pioB 22 1>;
+ };
+
+ user_led4 {
+ label = "user_led4";
+ gpios = <&pioB 23 1>;
+ };
+
+ red {
+ label = "red";
+ gpios = <&pioB 24 1>;
+ };
+
+ orange {
+ label = "orange";
+ gpios = <&pioB 30 1>;
+ };
+
+ green {
+ label = "green";
+ gpios = <&pioB 31 1>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user_pb1 {
+ label = "user_pb1";
+ gpios = <&pioB 25 1>;
+ linux,code = <0x100>;
+ };
+
+ user_pb2 {
+ label = "user_pb2";
+ gpios = <&pioB 13 1>;
+ linux,code = <0x101>;
+ };
+
+ user_pb3 {
+ label = "user_pb3";
+ gpios = <&pioA 26 1>;
+ linux,code = <0x102>;
+ };
+
+ user_pb4 {
+ label = "user_pb4";
+ gpios = <&pioC 9 1>;
+ linux,code = <0x103>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts
index d74545a2a77c..3b3c4e0fa79f 100644
--- a/arch/arm/boot/dts/usb_a9g20.dts
+++ b/arch/arm/boot/dts/usb_a9g20.dts
@@ -13,13 +13,24 @@
compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
chosen {
- bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:128k(at91bootstrap),256k(barebox)ro,128k(bareboxenv),128k(bareboxenv2),4M(kernel),120M(rootfs),-(data) root=/dev/mtdblock5 rw rootfstype=ubifs";
+ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
};
memory@20000000 {
reg = <0x20000000 0x4000000>;
};
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+ };
+
ahb {
apb {
dbgu: serial@fffff200 {
@@ -30,6 +41,58 @@
phy-mode = "rmii";
status = "okay";
};
+
+ usb1: gadget@fffa4000 {
+ atmel,vbus-gpio = <&pioC 5 0>;
+ status = "okay";
+ };
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ barebox@20000 {
+ label = "barebox";
+ reg = <0x20000 0x40000>;
+ };
+
+ bareboxenv@60000 {
+ label = "bareboxenv";
+ reg = <0x60000 0x20000>;
+ };
+
+ bareboxenv2@80000 {
+ label = "bareboxenv2";
+ reg = <0x80000 0x20000>;
+ };
+
+ kernel@a0000 {
+ label = "kernel";
+ reg = <0xa0000 0x400000>;
+ };
+
+ rootfs@4a0000 {
+ label = "rootfs";
+ reg = <0x4a0000 0x7800000>;
+ };
+
+ data@7ca0000 {
+ label = "data";
+ reg = <0x7ca0000 0x8360000>;
+ };
+ };
+
+ usb0: ohci@00500000 {
+ num-ports = <2>;
+ status = "okay";
};
};
@@ -55,4 +118,13 @@
gpio-key,wakeup;
};
};
+
+ i2c@0 {
+ status = "okay";
+
+ rv3029c2@56 {
+ compatible = "rv3029c2";
+ reg = <0x56>;
+ };
+ };
};
diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig
index 9123568d9a8d..994d331b2319 100644
--- a/arch/arm/configs/at91sam9g20_defconfig
+++ b/arch/arm/configs/at91sam9g20_defconfig
@@ -74,6 +74,8 @@ CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
CONFIG_SPI_SPIDEV=y
@@ -105,6 +107,7 @@ CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RV3029C2=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
CONFIG_MSDOS_FS=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 2d7b6e7b7271..889d73ac1ae1 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -13,6 +13,7 @@ CONFIG_UX500_SOC_DB8500=y
CONFIG_MACH_HREFV60=y
CONFIG_MACH_SNOWBALL=y
CONFIG_MACH_U5500=y
+CONFIG_MACH_UX500_DT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index e55cdcbd81fb..45db05d8d94c 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -20,9 +20,11 @@ config HAVE_AT91_USART5
config AT91_SAM9_ALT_RESET
bool
+ default !ARCH_AT91X40
config AT91_SAM9G45_RESET
bool
+ default !ARCH_AT91X40
menu "Atmel AT91 System-on-Chip"
@@ -45,7 +47,6 @@ config ARCH_AT91SAM9260
select HAVE_AT91_USART4
select HAVE_AT91_USART5
select HAVE_NET_MACB
- select AT91_SAM9_ALT_RESET
config ARCH_AT91SAM9261
bool "AT91SAM9261"
@@ -53,7 +54,6 @@ config ARCH_AT91SAM9261
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL
select HAVE_AT91_DBGU0
- select AT91_SAM9_ALT_RESET
config ARCH_AT91SAM9G10
bool "AT91SAM9G10"
@@ -61,7 +61,6 @@ config ARCH_AT91SAM9G10
select GENERIC_CLOCKEVENTS
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
- select AT91_SAM9_ALT_RESET
config ARCH_AT91SAM9263
bool "AT91SAM9263"
@@ -70,7 +69,6 @@ config ARCH_AT91SAM9263
select HAVE_FB_ATMEL
select HAVE_NET_MACB
select HAVE_AT91_DBGU1
- select AT91_SAM9_ALT_RESET
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
@@ -79,7 +77,6 @@ config ARCH_AT91SAM9RL
select HAVE_AT91_USART3
select HAVE_FB_ATMEL
select HAVE_AT91_DBGU0
- select AT91_SAM9_ALT_RESET
config ARCH_AT91SAM9G20
bool "AT91SAM9G20"
@@ -90,7 +87,6 @@ config ARCH_AT91SAM9G20
select HAVE_AT91_USART4
select HAVE_AT91_USART5
select HAVE_NET_MACB
- select AT91_SAM9_ALT_RESET
config ARCH_AT91SAM9G45
bool "AT91SAM9G45"
@@ -100,7 +96,6 @@ config ARCH_AT91SAM9G45
select HAVE_FB_ATMEL
select HAVE_NET_MACB
select HAVE_AT91_DBGU1
- select AT91_SAM9G45_RESET
config ARCH_AT91SAM9X5
bool "AT91SAM9x5 family"
@@ -109,7 +104,6 @@ config ARCH_AT91SAM9X5
select HAVE_FB_ATMEL
select HAVE_NET_MACB
select HAVE_AT91_DBGU0
- select AT91_SAM9G45_RESET
config ARCH_AT91X40
bool "AT91x40"
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 14b5a9c9a514..d1e5750a6a04 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -216,6 +216,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("t0_clk", "fffdc000.timer", &tc3_clk),
CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk),
CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk),
+ CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 0014573dfe17..df3bceacc86c 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -232,6 +232,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
/* more tc lookup table for DT entries */
CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb0_clk),
CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk),
+ CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk),
+ CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index a34d96afa746..b6831eeb7b76 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -131,7 +131,7 @@ static struct clk dma1_clk = {
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk uhphs_clk = {
- .name = "uhphs_clk",
+ .name = "uhphs",
.pmc_mask = 1 << AT91SAM9X5_ID_UHPHS,
.type = CLK_TYPE_PERIPHERAL,
};
@@ -230,6 +230,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
/* additional fake clock for macb_hclk */
CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk),
CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk),
+ CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk),
+ CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk),
+ CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk),
};
/*
@@ -299,14 +302,8 @@ static void __init at91sam9x5_map_io(void)
at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE);
}
-static void __init at91sam9x5_ioremap_registers(void)
-{
- at91_ioremap_ramc(0, AT91SAM9X5_BASE_DDRSDRC0, 512);
-}
-
void __init at91sam9x5_initialize(void)
{
- arm_pm_restart = at91sam9g45_restart;
at91_extern_irq = (1 << AT91SAM9X5_ID_IRQ0);
/* Register GPIO subsystem (using DT) */
@@ -314,11 +311,6 @@ void __init at91sam9x5_initialize(void)
}
/* --------------------------------------------------------------------
- * AT91SAM9x5 devices (temporary before modification of code)
- * -------------------------------------------------------------------- */
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-
-/* --------------------------------------------------------------------
* Interrupt initialization
* -------------------------------------------------------------------- */
/*
@@ -362,7 +354,6 @@ static unsigned int at91sam9x5_default_irq_priority[NR_AIC_IRQS] __initdata = {
struct at91_init_soc __initdata at91sam9x5_soc = {
.map_io = at91sam9x5_map_io,
.default_irq_priority = at91sam9x5_default_irq_priority,
- .ioremap_registers = at91sam9x5_ioremap_registers,
.register_clocks = at91sam9x5_register_clocks,
.init = at91sam9x5_initialize,
};
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 3bb40694b02d..161efbaa1029 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -138,6 +138,7 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.bus_width_16 = 0,
+ .ecc_mode = NAND_ECC_SOFT,
.parts = afeb9260_nand_partition,
.num_parts = ARRAY_SIZE(afeb9260_nand_partition),
.det_pin = -EINVAL,
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index 8510e9e54988..c6d44ee0c77e 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -140,6 +140,7 @@ static struct atmel_nand_data __initdata cam60_nand_data = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PA9,
.enable_pin = AT91_PIN_PA7,
+ .ecc_mode = NAND_ECC_SOFT,
.parts = cam60_nand_partition,
.num_parts = ARRAY_SIZE(cam60_nand_partition),
};
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 989e1c5a9ca0..5f3680e7c883 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -117,6 +117,7 @@ static struct atmel_nand_data __initdata cpu9krea_nand_data = {
.enable_pin = AT91_PIN_PC14,
.bus_width_16 = 0,
.det_pin = -EINVAL,
+ .ecc_mode = NAND_ECC_SOFT,
};
#ifdef CONFIG_MACH_CPU9260
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index 583b72472ad9..c18d4d307801 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -19,10 +19,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/system_rev.h>
-#include <mach/at91sam9_smc.h>
#include <asm/setup.h>
#include <asm/irq.h>
@@ -30,58 +27,9 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include "sam9_smc.h"
#include "generic.h"
-static void __init ek_init_early(void)
-{
- /* Initialize processor: 12.000 MHz crystal */
- at91_initialize(12000000);
-}
-
-/* det_pin is not connected */
-static struct atmel_nand_data __initdata ek_nand_data = {
- .ale = 21,
- .cle = 22,
- .det_pin = -EINVAL,
- .rdy_pin = AT91_PIN_PC8,
- .enable_pin = AT91_PIN_PC14,
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 2,
- .ncs_write_setup = 0,
- .nwe_setup = 2,
-
- .ncs_read_pulse = 4,
- .nrd_pulse = 4,
- .ncs_write_pulse = 4,
- .nwe_pulse = 4,
-
- .read_cycle = 7,
- .write_cycle = 7,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
- .tdf_cycles = 3,
-};
-
-static void __init ek_add_device_nand(void)
-{
- ek_nand_data.bus_width_16 = board_have_nand_16bit();
- /* setup bus-width (8 or 16) */
- if (ek_nand_data.bus_width_16)
- ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
- else
- ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(0, 3, &ek_nand_smc_config);
-
- at91_add_device_nand(&ek_nand_data);
-}
-
static const struct of_device_id irq_of_match[] __initconst = {
{ .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init },
@@ -98,9 +46,6 @@ static void __init at91_dt_init_irq(void)
static void __init at91_dt_device_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
- /* NAND */
- ek_add_device_nand();
}
static const char *at91_dt_board_compat[] __initdata = {
@@ -114,7 +59,7 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
- .init_early = ek_init_early,
+ .init_early = at91_dt_initialize,
.init_irq = at91_dt_init_irq,
.init_machine = at91_dt_device_init,
.dt_compat = at91_dt_board_compat,
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index bb9914582013..59b92aab9bcf 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -108,6 +108,7 @@ static struct atmel_nand_data __initdata kb9202_nand_data = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC29,
.enable_pin = AT91_PIN_PC28,
+ .ecc_mode = NAND_ECC_SOFT,
.parts = kb9202_nand_partition,
.num_parts = ARRAY_SIZE(kb9202_nand_partition),
};
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 3f8617c0e04e..57d5f6a4726a 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -190,6 +190,7 @@ static struct atmel_nand_data __initdata neocore926_nand_data = {
.rdy_pin = AT91_PIN_PB19,
.rdy_pin_active_low = 1,
.enable_pin = AT91_PIN_PD15,
+ .ecc_mode = NAND_ECC_SOFT,
.parts = neocore926_nand_partition,
.num_parts = ARRAY_SIZE(neocore926_nand_partition),
.det_pin = -EINVAL,
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index e029d220cb84..b6ed5ed7081a 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -138,6 +138,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
+ .ecc_mode = NAND_ECC_SOFT,
+ .on_flash_bbt = 1,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 9083df04e7ed..01332aa538b2 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -150,6 +150,8 @@ static struct atmel_nand_data __initdata dk_nand_data = {
.det_pin = AT91_PIN_PB1,
.rdy_pin = AT91_PIN_PC2,
.enable_pin = -EINVAL,
+ .ecc_mode = NAND_ECC_SOFT,
+ .on_flash_bbt = 1,
.parts = dk_nand_partition,
.num_parts = ARRAY_SIZE(dk_nand_partition),
};
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 84bce587735f..e8b116b6cba6 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -139,6 +139,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
+ .ecc_mode = NAND_ECC_SOFT,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index be8233bcabdc..d5aec55b0eb4 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -181,6 +181,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
+ .ecc_mode = NAND_ECC_SOFT,
+ .on_flash_bbt = 1,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 40895072a1a7..c3f994462864 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -187,6 +187,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC15,
.enable_pin = AT91_PIN_PC14,
+ .ecc_mode = NAND_ECC_SOFT,
+ .on_flash_bbt = 1,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 29f66052fe63..66f0ddf4b2ae 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -187,6 +187,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PA22,
.enable_pin = AT91_PIN_PD15,
+ .ecc_mode = NAND_ECC_SOFT,
+ .on_flash_bbt = 1,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 843d6286c6f4..8923ec9f5831 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -166,6 +166,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.det_pin = -EINVAL,
+ .ecc_mode = NAND_ECC_SOFT,
+ .on_flash_bbt = 1,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 57497e2b8878..e1bea73e6b30 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -148,6 +148,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.rdy_pin = AT91_PIN_PC8,
.enable_pin = AT91_PIN_PC14,
.det_pin = -EINVAL,
+ .ecc_mode = NAND_ECC_SOFT,
+ .on_flash_bbt = 1,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index c1366d0032bf..b109ce2ba864 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -94,6 +94,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PD17,
.enable_pin = AT91_PIN_PB6,
+ .ecc_mode = NAND_ECC_SOFT,
+ .on_flash_bbt = 1,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 3c2e3fcc310c..ebc9d01ce742 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -110,6 +110,7 @@ static struct atmel_nand_data __initdata snapper9260_nand_data = {
.bus_width_16 = 0,
.enable_pin = -EINVAL,
.det_pin = -EINVAL,
+ .ecc_mode = NAND_ECC_SOFT,
};
static struct sam9_smc_config __initdata snapper9260_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 72eb3b4d9ab6..7640049410a0 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -86,6 +86,7 @@ static struct atmel_nand_data __initdata nand_data = {
.enable_pin = AT91_PIN_PC14,
.bus_width_16 = 0,
.det_pin = -EINVAL,
+ .ecc_mode = NAND_ECC_SOFT,
};
static struct sam9_smc_config __initdata nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index 26c36fc2d1e5..b7483a3d0980 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -198,6 +198,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PA22,
.enable_pin = AT91_PIN_PD15,
+ .ecc_mode = NAND_ECC_SOFT,
+ .on_flash_bbt = 1,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 52f460768f71..38dd279d30b2 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -182,6 +182,7 @@ static struct atmel_nand_data __initdata yl9200_nand_data = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC14, /* R/!B (Sheet10) */
.enable_pin = AT91_PIN_PC15, /* !CE (Sheet10) */
+ .ecc_mode = NAND_ECC_SOFT,
.parts = yl9200_nand_partition,
.num_parts = ARRAY_SIZE(yl9200_nand_partition),
};
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index be51ca7f694d..a0f4d7424cdc 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -23,6 +23,7 @@
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/of_address.h>
#include <mach/hardware.h>
#include <mach/at91_pmc.h>
@@ -671,16 +672,12 @@ static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
uhpck.rate_hz /= 1 + ((at91_pmc_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
}
-int __init at91_clock_init(unsigned long main_clock)
+static int __init at91_pmc_init(unsigned long main_clock)
{
unsigned tmp, freq, mckr;
int i;
int pll_overclock = false;
- at91_pmc_base = ioremap(AT91_PMC, 256);
- if (!at91_pmc_base)
- panic("Impossible to ioremap AT91_PMC 0x%x\n", AT91_PMC);
-
/*
* When the bootloader initialized the main oscillator correctly,
* there's no problem using the cycle counter. But if it didn't,
@@ -802,6 +799,55 @@ int __init at91_clock_init(unsigned long main_clock)
return 0;
}
+#if defined(CONFIG_OF)
+static struct of_device_id pmc_ids[] = {
+ { .compatible = "atmel,at91rm9200-pmc" },
+ { /*sentinel*/ }
+};
+
+static struct of_device_id osc_ids[] = {
+ { .compatible = "atmel,osc" },
+ { /*sentinel*/ }
+};
+
+int __init at91_dt_clock_init(void)
+{
+ struct device_node *np;
+ u32 main_clock = 0;
+
+ np = of_find_matching_node(NULL, pmc_ids);
+ if (!np)
+ panic("unable to find compatible pmc node in dtb\n");
+
+ at91_pmc_base = of_iomap(np, 0);
+ if (!at91_pmc_base)
+ panic("unable to map pmc cpu registers\n");
+
+ of_node_put(np);
+
+ /* retrieve the freqency of fixed clocks from device tree */
+ np = of_find_matching_node(NULL, osc_ids);
+ if (np) {
+ u32 rate;
+ if (!of_property_read_u32(np, "clock-frequency", &rate))
+ main_clock = rate;
+ }
+
+ of_node_put(np);
+
+ return at91_pmc_init(main_clock);
+}
+#endif
+
+int __init at91_clock_init(unsigned long main_clock)
+{
+ at91_pmc_base = ioremap(AT91_PMC, 256);
+ if (!at91_pmc_base)
+ panic("Impossible to ioremap AT91_PMC 0x%x\n", AT91_PMC);
+
+ return at91_pmc_init(main_clock);
+}
+
/*
* Several unused clocks may be active. Turn them off.
*/
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 459f01a4a546..dd9b346c451d 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -20,6 +20,7 @@ extern void __init at91_init_sram(int bank, unsigned long base,
extern void __init at91rm9200_set_type(int type);
extern void __init at91_initialize(unsigned long main_clock);
extern void __init at91x40_initialize(unsigned long main_clock);
+extern void __init at91_dt_initialize(void);
/* Interrupts */
extern void __init at91_init_irq_default(void);
@@ -52,6 +53,7 @@ extern void __init at91sam9rl_set_console_clock(int id);
extern void __init at91sam9g45_set_console_clock(int id);
#ifdef CONFIG_AT91_PMC_UNIT
extern int __init at91_clock_init(unsigned long main_clock);
+extern int __init at91_dt_clock_init(void);
#else
static int inline at91_clock_init(unsigned long main_clock) { return 0; }
#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_shdwc.h b/arch/arm/mach-at91/include/mach/at91_shdwc.h
index 1d4fe822c77a..60478ea8bd46 100644
--- a/arch/arm/mach-at91/include/mach/at91_shdwc.h
+++ b/arch/arm/mach-at91/include/mach/at91_shdwc.h
@@ -36,9 +36,11 @@ extern void __iomem *at91_shdwc_base;
#define AT91_SHDW_WKMODE0_HIGH 1
#define AT91_SHDW_WKMODE0_LOW 2
#define AT91_SHDW_WKMODE0_ANYLEVEL 3
-#define AT91_SHDW_CPTWK0 (0xf << 4) /* Counter On Wake Up 0 */
+#define AT91_SHDW_CPTWK0_MAX 0xf /* Maximum Counter On Wake Up 0 */
+#define AT91_SHDW_CPTWK0 (AT91_SHDW_CPTWK0_MAX << 4) /* Counter On Wake Up 0 */
#define AT91_SHDW_CPTWK0_(x) ((x) << 4)
#define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */
+#define AT91_SHDW_RTCWKEN (1 << 17) /* Real Time Clock Wake-up Enable */
#define AT91_SHDW_SR 0x08 /* Shut Down Status Register */
#define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h
index a297a77d88e2..88e43d534cdf 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9x5.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h
@@ -55,11 +55,6 @@
#define AT91SAM9X5_BASE_USART2 0xf8024000
/*
- * System Peripherals
- */
-#define AT91SAM9X5_BASE_DDRSDRC0 0xffffe800
-
-/*
* Base addresses for early serial code (uncompress.h)
*/
#define AT91_DBGU AT91_BASE_DBGU0
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index dc8d6d4f17cf..544a5d5ce416 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -41,6 +41,7 @@
#include <sound/atmel-ac97c.h>
#include <linux/serial.h>
#include <linux/platform_data/macb.h>
+#include <linux/platform_data/atmel.h>
/* USB Device */
struct at91_udc_data {
@@ -98,20 +99,6 @@ extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
- /* NAND / SmartMedia */
-struct atmel_nand_data {
- int enable_pin; /* chip enable */
- int det_pin; /* card detect */
- int rdy_pin; /* ready/busy */
- u8 rdy_pin_active_low; /* rdy_pin value is inverted */
- u8 ale; /* address line number connected to ALE */
- u8 cle; /* address line number connected to CLE */
- u8 bus_width_16; /* buswidth is 16 bit */
- u8 correction_cap; /* PMECC correction capability */
- u16 sector_size; /* Sector size for PMECC */
- struct mtd_partition *parts;
- unsigned int num_parts;
-};
extern void __init at91_add_device_nand(struct atmel_nand_data *data);
/* I2C*/
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 6c9d5e69ac28..f630250c6b87 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -197,19 +197,6 @@ extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0,
extern u32 at91_slow_clock_sz;
#endif
-void __iomem *at91_ramc_base[2];
-
-void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
-{
- if (id < 0 || id > 1) {
- pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id);
- BUG();
- }
- at91_ramc_base[id] = ioremap(addr, size);
- if (!at91_ramc_base[id])
- panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr);
-}
-
static int at91_pm_enter(suspend_state_t state)
{
at91_gpio_suspend();
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 372396c2ecb6..1083739e3065 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -9,6 +9,7 @@
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/pm.h>
+#include <linux/of_address.h>
#include <asm/mach/map.h>
@@ -51,6 +52,19 @@ void __init at91_init_interrupts(unsigned int *priority)
at91_gpio_irq_setup();
}
+void __iomem *at91_ramc_base[2];
+
+void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
+{
+ if (id < 0 || id > 1) {
+ pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id);
+ BUG();
+ }
+ at91_ramc_base[id] = ioremap(addr, size);
+ if (!at91_ramc_base[id])
+ panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr);
+}
+
static struct map_desc sram_desc[2] __initdata;
void __init at91_init_sram(int bank, unsigned long base, unsigned int length)
@@ -285,6 +299,150 @@ void __init at91_ioremap_matrix(u32 base_addr)
panic("Impossible to ioremap at91_matrix_base\n");
}
+#if defined(CONFIG_OF)
+static struct of_device_id rstc_ids[] = {
+ { .compatible = "atmel,at91sam9260-rstc", .data = at91sam9_alt_restart },
+ { .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart },
+ { /*sentinel*/ }
+};
+
+static void at91_dt_rstc(void)
+{
+ struct device_node *np;
+ const struct of_device_id *of_id;
+
+ np = of_find_matching_node(NULL, rstc_ids);
+ if (!np)
+ panic("unable to find compatible rstc node in dtb\n");
+
+ at91_rstc_base = of_iomap(np, 0);
+ if (!at91_rstc_base)
+ panic("unable to map rstc cpu registers\n");
+
+ of_id = of_match_node(rstc_ids, np);
+ if (!of_id)
+ panic("AT91: rtsc no restart function availlable\n");
+
+ arm_pm_restart = of_id->data;
+
+ of_node_put(np);
+}
+
+static struct of_device_id ramc_ids[] = {
+ { .compatible = "atmel,at91sam9260-sdramc" },
+ { .compatible = "atmel,at91sam9g45-ddramc" },
+ { /*sentinel*/ }
+};
+
+static void at91_dt_ramc(void)
+{
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, ramc_ids);
+ if (!np)
+ panic("unable to find compatible ram conroller node in dtb\n");
+
+ at91_ramc_base[0] = of_iomap(np, 0);
+ if (!at91_ramc_base[0])
+ panic("unable to map ramc[0] cpu registers\n");
+ /* the controller may have 2 banks */
+ at91_ramc_base[1] = of_iomap(np, 1);
+
+ of_node_put(np);
+}
+
+static struct of_device_id shdwc_ids[] = {
+ { .compatible = "atmel,at91sam9260-shdwc", },
+ { .compatible = "atmel,at91sam9rl-shdwc", },
+ { .compatible = "atmel,at91sam9x5-shdwc", },
+ { /*sentinel*/ }
+};
+
+static const char *shdwc_wakeup_modes[] = {
+ [AT91_SHDW_WKMODE0_NONE] = "none",
+ [AT91_SHDW_WKMODE0_HIGH] = "high",
+ [AT91_SHDW_WKMODE0_LOW] = "low",
+ [AT91_SHDW_WKMODE0_ANYLEVEL] = "any",
+};
+
+const int at91_dtget_shdwc_wakeup_mode(struct device_node *np)
+{
+ const char *pm;
+ int err, i;
+
+ err = of_property_read_string(np, "atmel,wakeup-mode", &pm);
+ if (err < 0)
+ return AT91_SHDW_WKMODE0_ANYLEVEL;
+
+ for (i = 0; i < ARRAY_SIZE(shdwc_wakeup_modes); i++)
+ if (!strcasecmp(pm, shdwc_wakeup_modes[i]))
+ return i;
+
+ return -ENODEV;
+}
+
+static void at91_dt_shdwc(void)
+{
+ struct device_node *np;
+ int wakeup_mode;
+ u32 reg;
+ u32 mode = 0;
+
+ np = of_find_matching_node(NULL, shdwc_ids);
+ if (!np) {
+ pr_debug("AT91: unable to find compatible shutdown (shdwc) conroller node in dtb\n");
+ return;
+ }
+
+ at91_shdwc_base = of_iomap(np, 0);
+ if (!at91_shdwc_base)
+ panic("AT91: unable to map shdwc cpu registers\n");
+
+ wakeup_mode = at91_dtget_shdwc_wakeup_mode(np);
+ if (wakeup_mode < 0) {
+ pr_warn("AT91: shdwc unknown wakeup mode\n");
+ goto end;
+ }
+
+ if (!of_property_read_u32(np, "atmel,wakeup-counter", &reg)) {
+ if (reg > AT91_SHDW_CPTWK0_MAX) {
+ pr_warn("AT91: shdwc wakeup conter 0x%x > 0x%x reduce it to 0x%x\n",
+ reg, AT91_SHDW_CPTWK0_MAX, AT91_SHDW_CPTWK0_MAX);
+ reg = AT91_SHDW_CPTWK0_MAX;
+ }
+ mode |= AT91_SHDW_CPTWK0_(reg);
+ }
+
+ if (of_property_read_bool(np, "atmel,wakeup-rtc-timer"))
+ mode |= AT91_SHDW_RTCWKEN;
+
+ if (of_property_read_bool(np, "atmel,wakeup-rtt-timer"))
+ mode |= AT91_SHDW_RTTWKEN;
+
+ at91_shdwc_write(AT91_SHDW_MR, wakeup_mode | mode);
+
+end:
+ pm_power_off = at91sam9_poweroff;
+
+ of_node_put(np);
+}
+
+void __init at91_dt_initialize(void)
+{
+ at91_dt_rstc();
+ at91_dt_ramc();
+ at91_dt_shdwc();
+
+ /* Init clock subsystem */
+ at91_dt_clock_init();
+
+ /* Register the processor-specific clocks */
+ at91_boot_soc.register_clocks();
+
+ at91_boot_soc.init();
+}
+#endif
+
void __init at91_initialize(unsigned long main_clock)
{
at91_boot_soc.ioremap_registers();
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index acbc5e1db06f..e299a9576bf0 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_MACH_T5325) += t5325-setup.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
+obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
new file mode 100644
index 000000000000..985453994dd3
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-dreamplug.c
@@ -0,0 +1,152 @@
+/*
+ * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
+ *
+ * arch/arm/mach-kirkwood/board-dreamplug.c
+ *
+ * Marvell DreamPlug Reference Board Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+struct mtd_partition dreamplug_partitions[] = {
+ {
+ .name = "u-boot",
+ .size = SZ_512K,
+ .offset = 0,
+ },
+ {
+ .name = "u-boot env",
+ .size = SZ_64K,
+ .offset = SZ_512K + SZ_512K,
+ },
+ {
+ .name = "dtb",
+ .size = SZ_64K,
+ .offset = SZ_512K + SZ_512K + SZ_512K,
+ },
+};
+
+static const struct flash_platform_data dreamplug_spi_slave_data = {
+ .type = "mx25l1606e",
+ .name = "spi_flash",
+ .parts = dreamplug_partitions,
+ .nr_parts = ARRAY_SIZE(dreamplug_partitions),
+};
+
+static struct spi_board_info __initdata dreamplug_spi_slave_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &dreamplug_spi_slave_data,
+ .irq = -1,
+ .max_speed_hz = 50000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(1),
+};
+
+static struct mv_sata_platform_data dreamplug_sata_data = {
+ .n_ports = 1,
+};
+
+static struct mvsdio_platform_data dreamplug_mvsdio_data = {
+ /* unfortunately the CD signal has not been connected */
+};
+
+static struct gpio_led dreamplug_led_pins[] = {
+ {
+ .name = "dreamplug:blue:bluetooth",
+ .gpio = 47,
+ .active_low = 1,
+ },
+ {
+ .name = "dreamplug:green:wifi",
+ .gpio = 48,
+ .active_low = 1,
+ },
+ {
+ .name = "dreamplug:green:wifi_ap",
+ .gpio = 49,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data dreamplug_led_data = {
+ .leds = dreamplug_led_pins,
+ .num_leds = ARRAY_SIZE(dreamplug_led_pins),
+};
+
+static struct platform_device dreamplug_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &dreamplug_led_data,
+ }
+};
+
+static unsigned int dreamplug_mpp_config[] __initdata = {
+ MPP0_SPI_SCn,
+ MPP1_SPI_MOSI,
+ MPP2_SPI_SCK,
+ MPP3_SPI_MISO,
+ MPP47_GPIO, /* Bluetooth LED */
+ MPP48_GPIO, /* Wifi LED */
+ MPP49_GPIO, /* Wifi AP LED */
+ 0
+};
+
+void __init dreamplug_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_mpp_conf(dreamplug_mpp_config);
+
+ spi_register_board_info(dreamplug_spi_slave_info,
+ ARRAY_SIZE(dreamplug_spi_slave_info));
+ kirkwood_spi_init();
+
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&dreamplug_ge00_data);
+ kirkwood_ge01_init(&dreamplug_ge01_data);
+ kirkwood_sata_init(&dreamplug_sata_data);
+ kirkwood_sdio_init(&dreamplug_mvsdio_data);
+
+ platform_device_register(&dreamplug_leds);
+}
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index fbe6405602ed..1c672d9e6656 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -3,7 +3,7 @@
*
* arch/arm/mach-kirkwood/board-dt.c
*
- * Marvell DreamPlug Reference Board Setup
+ * Flattened Device Tree board initialization
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
@@ -12,150 +12,45 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
-#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <asm/mach/map.h>
+#include <mach/bridge-regs.h>
#include "common.h"
-#include "mpp.h"
static struct of_device_id kirkwood_dt_match_table[] __initdata = {
{ .compatible = "simple-bus", },
{ }
};
-struct mtd_partition dreamplug_partitions[] = {
- {
- .name = "u-boot",
- .size = SZ_512K,
- .offset = 0,
- },
- {
- .name = "u-boot env",
- .size = SZ_64K,
- .offset = SZ_512K + SZ_512K,
- },
- {
- .name = "dtb",
- .size = SZ_64K,
- .offset = SZ_512K + SZ_512K + SZ_512K,
- },
-};
-
-static const struct flash_platform_data dreamplug_spi_slave_data = {
- .type = "mx25l1606e",
- .name = "spi_flash",
- .parts = dreamplug_partitions,
- .nr_parts = ARRAY_SIZE(dreamplug_partitions),
-};
-
-static struct spi_board_info __initdata dreamplug_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &dreamplug_spi_slave_data,
- .irq = -1,
- .max_speed_hz = 50000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(1),
-};
-
-static struct mv_sata_platform_data dreamplug_sata_data = {
- .n_ports = 1,
-};
-
-static struct mvsdio_platform_data dreamplug_mvsdio_data = {
- /* unfortunately the CD signal has not been connected */
-};
-
-static struct gpio_led dreamplug_led_pins[] = {
- {
- .name = "dreamplug:blue:bluetooth",
- .gpio = 47,
- .active_low = 1,
- },
- {
- .name = "dreamplug:green:wifi",
- .gpio = 48,
- .active_low = 1,
- },
- {
- .name = "dreamplug:green:wifi_ap",
- .gpio = 49,
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data dreamplug_led_data = {
- .leds = dreamplug_led_pins,
- .num_leds = ARRAY_SIZE(dreamplug_led_pins),
-};
-
-static struct platform_device dreamplug_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &dreamplug_led_data,
- }
-};
-
-static unsigned int dreamplug_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP47_GPIO, /* Bluetooth LED */
- MPP48_GPIO, /* Wifi LED */
- MPP49_GPIO, /* Wifi AP LED */
- 0
-};
-
-static void __init dreamplug_init(void)
+static void __init kirkwood_dt_init(void)
{
+ pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
+
/*
- * Basic setup. Needs to be called early.
+ * Disable propagation of mbus errors to the CPU local bus,
+ * as this causes mbus errors (which can occur for example
+ * for PCI aborts) to throw CPU aborts, which we're not set
+ * up to deal with.
*/
- kirkwood_mpp_conf(dreamplug_mpp_config);
+ writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
- spi_register_board_info(dreamplug_spi_slave_info,
- ARRAY_SIZE(dreamplug_spi_slave_info));
- kirkwood_spi_init();
+ kirkwood_setup_cpu_mbus();
- kirkwood_ehci_init();
- kirkwood_ge00_init(&dreamplug_ge00_data);
- kirkwood_ge01_init(&dreamplug_ge01_data);
- kirkwood_sata_init(&dreamplug_sata_data);
- kirkwood_sdio_init(&dreamplug_mvsdio_data);
+#ifdef CONFIG_CACHE_FEROCEON_L2
+ kirkwood_l2_init();
+#endif
- platform_device_register(&dreamplug_leds);
-}
+ /* internal devices that every board has */
+ kirkwood_wdt_init();
+ kirkwood_xor0_init();
+ kirkwood_xor1_init();
+ kirkwood_crypto_init();
-static void __init kirkwood_dt_init(void)
-{
- kirkwood_init();
+#ifdef CONFIG_KEXEC
+ kexec_reinit = kirkwood_enable_pcie;
+#endif
if (of_machine_is_compatible("globalscale,dreamplug"))
dreamplug_init();
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 77d4852e19f2..a02cae881f2f 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -279,7 +279,7 @@ void __init kirkwood_crypto_init(void)
/*****************************************************************************
* XOR0
****************************************************************************/
-static void __init kirkwood_xor0_init(void)
+void __init kirkwood_xor0_init(void)
{
kirkwood_clk_ctrl |= CGC_XOR0;
@@ -291,7 +291,7 @@ static void __init kirkwood_xor0_init(void)
/*****************************************************************************
* XOR1
****************************************************************************/
-static void __init kirkwood_xor1_init(void)
+void __init kirkwood_xor1_init(void)
{
kirkwood_clk_ctrl |= CGC_XOR1;
@@ -303,7 +303,7 @@ static void __init kirkwood_xor1_init(void)
/*****************************************************************************
* Watchdog
****************************************************************************/
-static void __init kirkwood_wdt_init(void)
+void __init kirkwood_wdt_init(void)
{
orion_wdt_init(kirkwood_tclk);
}
@@ -392,7 +392,7 @@ void __init kirkwood_audio_init(void)
/*
* Identify device ID and revision.
*/
-static char * __init kirkwood_id(void)
+char * __init kirkwood_id(void)
{
u32 dev, rev;
@@ -435,7 +435,7 @@ static char * __init kirkwood_id(void)
}
}
-static void __init kirkwood_l2_init(void)
+void __init kirkwood_l2_init(void)
{
#ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG);
@@ -450,7 +450,6 @@ void __init kirkwood_init(void)
{
printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n",
kirkwood_id(), kirkwood_tclk);
- kirkwood_i2s_data.tclk = kirkwood_tclk;
/*
* Disable propagation of mbus errors to the CPU local bus,
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 9071a397136d..fa8e7689c436 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -51,6 +51,21 @@ void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev
void kirkwood_audio_init(void);
void kirkwood_restart(char, const char *);
+/* board init functions for boards not fully converted to fdt */
+#ifdef CONFIG_MACH_DREAMPLUG_DT
+void dreamplug_init(void);
+#else
+static inline void dreamplug_init(void) {};
+#endif
+
+/* early init functions not converted to fdt yet */
+char *kirkwood_id(void);
+void kirkwood_l2_init(void);
+void kirkwood_wdt_init(void);
+void kirkwood_xor0_init(void);
+void kirkwood_xor1_init(void);
+void kirkwood_crypto_init(void);
+
extern int kirkwood_tclk;
extern struct sys_timer kirkwood_timer;
diff --git a/arch/arm/mach-spear6xx/Kconfig b/arch/arm/mach-spear6xx/Kconfig
index ff4ae5ba00f1..fbe298bd1d92 100644
--- a/arch/arm/mach-spear6xx/Kconfig
+++ b/arch/arm/mach-spear6xx/Kconfig
@@ -5,11 +5,12 @@
if ARCH_SPEAR6XX
menu "SPEAr6xx Implementations"
-config BOARD_SPEAR600_EVB
- bool "SPEAr600 Evaluation Board"
+config BOARD_SPEAR600_DT
+ bool "SPEAr600 generic board configured via device-tree"
select MACH_SPEAR600
+ select USE_OF
help
- Supports ST SPEAr600 Evaluation Board
+ Supports ST SPEAr600 boards configured via the device-tree
endmenu
diff --git a/arch/arm/mach-spear6xx/Makefile b/arch/arm/mach-spear6xx/Makefile
index cc1a4d82d459..76e5750552fc 100644
--- a/arch/arm/mach-spear6xx/Makefile
+++ b/arch/arm/mach-spear6xx/Makefile
@@ -4,9 +4,3 @@
# common files
obj-y += clock.o spear6xx.o
-
-# spear600 specific files
-obj-$(CONFIG_MACH_SPEAR600) += spear600.o
-
-# spear600 boards files
-obj-$(CONFIG_BOARD_SPEAR600_EVB) += spear600_evb.o
diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c
index ac70e0d88fef..358f2800f17b 100644
--- a/arch/arm/mach-spear6xx/clock.c
+++ b/arch/arm/mach-spear6xx/clock.c
@@ -641,8 +641,8 @@ static struct clk_lookup spear_clk_lookups[] = {
{ .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk},
{ .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk},
{ .con_id = "gpt3_synth_clk", .clk = &gpt3_synth_clk},
- { .dev_id = "uart0", .clk = &uart0_clk},
- { .dev_id = "uart1", .clk = &uart1_clk},
+ { .dev_id = "d0000000.serial", .clk = &uart0_clk},
+ { .dev_id = "d0080000.serial", .clk = &uart1_clk},
{ .dev_id = "firda", .clk = &firda_clk},
{ .dev_id = "clcd", .clk = &clcd_clk},
{ .dev_id = "gpt0", .clk = &gpt0_clk},
@@ -655,20 +655,20 @@ static struct clk_lookup spear_clk_lookups[] = {
{ .con_id = "usbh.1_clk", .clk = &usbh1_clk},
/* clock derived from ahb clk */
{ .con_id = "apb_clk", .clk = &apb_clk},
- { .dev_id = "i2c_designware.0", .clk = &i2c_clk},
+ { .dev_id = "d0200000.i2c", .clk = &i2c_clk},
{ .dev_id = "dma", .clk = &dma_clk},
{ .dev_id = "jpeg", .clk = &jpeg_clk},
{ .dev_id = "gmac", .clk = &gmac_clk},
{ .dev_id = "smi", .clk = &smi_clk},
- { .con_id = "fsmc", .clk = &fsmc_clk},
+ { .dev_id = "fsmc-nand", .clk = &fsmc_clk},
/* clock derived from apb clk */
{ .dev_id = "adc", .clk = &adc_clk},
{ .dev_id = "ssp-pl022.0", .clk = &ssp0_clk},
{ .dev_id = "ssp-pl022.1", .clk = &ssp1_clk},
{ .dev_id = "ssp-pl022.2", .clk = &ssp2_clk},
- { .dev_id = "gpio0", .clk = &gpio0_clk},
- { .dev_id = "gpio1", .clk = &gpio1_clk},
- { .dev_id = "gpio2", .clk = &gpio2_clk},
+ { .dev_id = "f0100000.gpio", .clk = &gpio0_clk},
+ { .dev_id = "fc980000.gpio", .clk = &gpio1_clk},
+ { .dev_id = "d8100000.gpio", .clk = &gpio2_clk},
};
void __init spear6xx_clk_init(void)
diff --git a/arch/arm/mach-spear6xx/spear600.c b/arch/arm/mach-spear6xx/spear600.c
deleted file mode 100644
index d0e6eeae9b04..000000000000
--- a/arch/arm/mach-spear6xx/spear600.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/spear600.c
- *
- * SPEAr600 machine source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/ptrace.h>
-#include <asm/irq.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* Add spear600 specific devices here */
-
-void __init spear600_init(void)
-{
- /* call spear6xx family common init function */
- spear6xx_init();
-}
diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c
deleted file mode 100644
index c6e4254741cc..000000000000
--- a/arch/arm/mach-spear6xx/spear600_evb.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/spear600_evb.c
- *
- * SPEAr600 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-static struct amba_device *amba_devs[] __initdata = {
- &gpio_device[0],
- &gpio_device[1],
- &gpio_device[2],
- &uart_device[0],
- &uart_device[1],
-};
-
-static struct platform_device *plat_devs[] __initdata = {
-};
-
-static void __init spear600_evb_init(void)
-{
- unsigned int i;
-
- /* call spear600 machine init function */
- spear600_init();
-
- /* Add Platform Devices */
- platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
- /* Add Amba Devices */
- for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
- amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR600, "ST-SPEAR600-EVB")
- .atag_offset = 0x100,
- .map_io = spear6xx_map_io,
- .init_irq = spear6xx_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &spear6xx_timer,
- .init_machine = spear600_evb_init,
- .restart = spear_restart,
-MACHINE_END
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index b997b1b10ba0..2ed8b14c82c8 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -6,111 +6,21 @@
* Copyright (C) 2009 ST Microelectronics
* Rajeev Kumar<rajeev-dlh.kumar@st.com>
*
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ *
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#include <linux/types.h>
-#include <linux/amba/pl061.h>
-#include <linux/ptrace.h>
-#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
#include <asm/hardware/vic.h>
-#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <mach/generic.h>
#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-/* Add spear6xx machines common devices here */
-/* uart device registration */
-struct amba_device uart_device[] = {
- {
- .dev = {
- .init_name = "uart0",
- },
- .res = {
- .start = SPEAR6XX_ICM1_UART0_BASE,
- .end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_UART_0},
- }, {
- .dev = {
- .init_name = "uart1",
- },
- .res = {
- .start = SPEAR6XX_ICM1_UART1_BASE,
- .end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_UART_1},
- }
-};
-
-/* gpio device registration */
-static struct pl061_platform_data gpio_plat_data[] = {
- {
- .gpio_base = 0,
- .irq_base = SPEAR_GPIO0_INT_BASE,
- }, {
- .gpio_base = 8,
- .irq_base = SPEAR_GPIO1_INT_BASE,
- }, {
- .gpio_base = 16,
- .irq_base = SPEAR_GPIO2_INT_BASE,
- },
-};
-
-struct amba_device gpio_device[] = {
- {
- .dev = {
- .init_name = "gpio0",
- .platform_data = &gpio_plat_data[0],
- },
- .res = {
- .start = SPEAR6XX_CPU_GPIO_BASE,
- .end = SPEAR6XX_CPU_GPIO_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_LOCAL_GPIO},
- }, {
- .dev = {
- .init_name = "gpio1",
- .platform_data = &gpio_plat_data[1],
- },
- .res = {
- .start = SPEAR6XX_ICM3_GPIO_BASE,
- .end = SPEAR6XX_ICM3_GPIO_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_BASIC_GPIO},
- }, {
- .dev = {
- .init_name = "gpio2",
- .platform_data = &gpio_plat_data[2],
- },
- .res = {
- .start = SPEAR6XX_ICM2_GPIO_BASE,
- .end = SPEAR6XX_ICM2_GPIO_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_APPL_GPIO},
- }
-};
-
-/* This will add devices, and do machine specific tasks */
-void __init spear6xx_init(void)
-{
- /* nothing to do for now */
-}
-
-/* This will initialize vic */
-void __init spear6xx_init_irq(void)
-{
- vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_PRI_BASE, 0, ~0, 0);
- vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_SEC_BASE, 32, ~0, 0);
-}
/* Following will create static virtual/physical mappings */
static struct map_desc spear6xx_io_desc[] __initdata = {
@@ -181,3 +91,33 @@ static void __init spear6xx_timer_init(void)
struct sys_timer spear6xx_timer = {
.init = spear6xx_timer_init,
};
+
+static void __init spear600_dt_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *spear600_dt_board_compat[] = {
+ "st,spear600",
+ NULL
+};
+
+static const struct of_device_id vic_of_match[] __initconst = {
+ { .compatible = "arm,pl190-vic", .data = vic_of_init, },
+ { /* Sentinel */ }
+};
+
+static void __init spear6xx_dt_init_irq(void)
+{
+ of_irq_init(vic_of_match);
+}
+
+DT_MACHINE_START(SPEAR600_DT, "ST SPEAr600 (Flattened Device Tree)")
+ .map_io = spear6xx_map_io,
+ .init_irq = spear6xx_dt_init_irq,
+ .handle_irq = vic_handle_irq,
+ .timer = &spear6xx_timer,
+ .init_machine = spear600_dt_init,
+ .restart = spear_restart,
+ .dt_compat = spear600_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 8904d18de01a..880d02ec89d4 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -58,6 +58,12 @@ config UX500_AUTO_PLATFORM
At least one platform needs to be selected in order to build
a working kernel. If everything else is disabled, this
automatically enables MACH_MOP500.
+
+config MACH_UX500_DT
+ bool "Generic U8500 support using device tree"
+ depends on MACH_MOP500
+ select USE_OF
+
endmenu
config UX500_DEBUG_UART
diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot
index ff0a4b5b0a82..dd5cd00e2554 100644
--- a/arch/arm/mach-ux500/Makefile.boot
+++ b/arch/arm/mach-ux500/Makefile.boot
@@ -2,3 +2,4 @@
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
+dtb-$(CONFIG_MACH_SNOWBALL) += snowball.dtb
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 29d330374994..77d03c1fbd04 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -30,6 +30,9 @@
#include <linux/gpio_keys.h>
#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -440,7 +443,7 @@ static struct stedma40_chan_cfg ssp0_dma_cfg_tx = {
};
#endif
-static struct pl022_ssp_controller ssp0_platform_data = {
+static struct pl022_ssp_controller ssp0_plat = {
.bus_id = 0,
#ifdef CONFIG_STE_DMA40
.enable_dma = 1,
@@ -458,7 +461,7 @@ static struct pl022_ssp_controller ssp0_platform_data = {
static void __init mop500_spi_init(struct device *parent)
{
- db8500_add_ssp0(parent, &ssp0_platform_data);
+ db8500_add_ssp0(parent, &ssp0_plat);
}
#ifdef CONFIG_STE_DMA40
@@ -618,6 +621,7 @@ static void __init mop500_init_machine(void)
mop500_pins_init();
+ /* FIXME: parent of ab8500 should be prcmu */
for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
mop500_platform_devs[i]->dev.parent = parent;
@@ -738,3 +742,94 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
.handle_irq = gic_handle_irq,
.init_machine = snowball_init_machine,
MACHINE_END
+
+#ifdef CONFIG_MACH_UX500_DT
+
+struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
+ OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
+ OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
+ OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
+ {},
+};
+
+static const struct of_device_id u8500_soc_node[] = {
+ /* only create devices below soc node */
+ { .compatible = "stericsson,db8500", },
+ { },
+};
+
+static void __init u8500_init_machine(void)
+{
+ struct device *parent = NULL;
+ int i2c0_devs;
+ int i;
+
+ parent = u8500_init_devices();
+ i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+
+ for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
+ mop500_platform_devs[i]->dev.parent = parent;
+ for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
+ snowball_platform_devs[i]->dev.parent = parent;
+
+ /* automatically probe child nodes of db8500 device */
+ of_platform_populate(NULL, u8500_soc_node, u8500_auxdata_lookup, parent);
+
+ if (of_machine_is_compatible("st-ericsson,mop500")) {
+ mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
+ mop500_pins_init();
+
+ platform_add_devices(mop500_platform_devs,
+ ARRAY_SIZE(mop500_platform_devs));
+
+ mop500_sdi_init(parent);
+ } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
+ snowball_pins_init();
+ platform_add_devices(snowball_platform_devs,
+ ARRAY_SIZE(snowball_platform_devs));
+
+ snowball_sdi_init(parent);
+ } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
+ /*
+ * The HREFv60 board removed a GPIO expander and routed
+ * all these GPIO pins to the internal GPIO controller
+ * instead.
+ */
+ mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
+ i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
+ hrefv60_pins_init();
+ platform_add_devices(mop500_platform_devs,
+ ARRAY_SIZE(mop500_platform_devs));
+
+ hrefv60_sdi_init(parent);
+ }
+ mop500_i2c_init(parent);
+
+ i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+ i2c_register_board_info(2, mop500_i2c2_devices,
+ ARRAY_SIZE(mop500_i2c2_devices));
+
+ /* This board has full regulator constraints */
+ regulator_has_full_constraints();
+}
+
+static const char * u8500_dt_board_compat[] = {
+ "calaosystems,snowball-a9500",
+ "st-ericsson,hrefv60+",
+ "st-ericsson,u8500",
+ "st-ericsson,mop500",
+ NULL,
+};
+
+
+DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)")
+ .map_io = u8500_map_io,
+ .init_irq = ux500_init_irq,
+ /* we re-use nomadik timer here */
+ .timer = &ux500_timer,
+ .handle_irq = gic_handle_irq,
+ .init_machine = u8500_init_machine,
+ .dt_compat = u8500_dt_board_compat,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
index da5569d83d58..77a75ed0df67 100644
--- a/arch/arm/mach-ux500/cache-l2x0.c
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -5,6 +5,8 @@
*/
#include <linux/io.h>
+#include <linux/of.h>
+
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
#include <mach/hardware.h>
@@ -45,7 +47,10 @@ static int __init ux500_l2x0_init(void)
ux500_l2x0_unlock();
/* 64KB way size, 8 way associativity, force WA */
- l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
+ if (of_have_populated_dt())
+ l2x0_of_init(0x3e060000, 0xc0000fff);
+ else
+ l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
/*
* We can't disable l2 as we are in non secure mode, currently
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 6242e88e5fd3..d11f3892a27d 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -16,6 +16,8 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/stat.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
@@ -28,6 +30,11 @@
void __iomem *_PRCMU_BASE;
+static const struct of_device_id ux500_dt_irq_match[] = {
+ { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+ {},
+};
+
void __init ux500_init_irq(void)
{
void __iomem *dist_base;
@@ -42,7 +49,12 @@ void __init ux500_init_irq(void)
} else
ux500_unknown_soc();
- gic_init(0, 29, dist_base, cpu_base);
+#ifdef CONFIG_OF
+ if (of_have_populated_dt())
+ of_irq_init(ux500_dt_irq_match);
+ else
+#endif
+ gic_init(0, 29, dist_base, cpu_base);
/*
* Init clocks here so that they are available for system timer
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index e9d580702fbb..d37df98b5c32 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -7,6 +7,7 @@
#include <linux/io.h>
#include <linux/errno.h>
#include <linux/clksrc-dbx500-prcmu.h>
+#include <linux/of.h>
#include <asm/smp_twd.h>
@@ -30,9 +31,13 @@ static void __init ux500_twd_init(void)
twd_local_timer = cpu_is_u5500() ? &u5500_twd_local_timer :
&u8500_twd_local_timer;
- err = twd_local_timer_register(twd_local_timer);
- if (err)
- pr_err("twd_local_timer_register failed %d\n", err);
+ if (of_have_populated_dt())
+ twd_local_timer_of_register();
+ else {
+ err = twd_local_timer_register(twd_local_timer);
+ if (err)
+ pr_err("twd_local_timer_register failed %d\n", err);
+ }
}
#else
#define ux500_twd_init() do { } while(0)
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 089899a7db72..74daf5ed1432 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -21,6 +21,7 @@
#include <plat/orion_wdt.h>
#include <plat/mv_xor.h>
#include <plat/ehci-orion.h>
+#include <mach/bridge-regs.h>
/* Fill in the resources structure and link it into the platform
device structure. There is always a memory region, and nearly
@@ -568,13 +569,17 @@ void __init orion_spi_1_init(unsigned long mapbase,
****************************************************************************/
static struct orion_wdt_platform_data orion_wdt_data;
+static struct resource orion_wdt_resource =
+ DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28);
+
static struct platform_device orion_wdt_device = {
.name = "orion_wdt",
.id = -1,
.dev = {
.platform_data = &orion_wdt_data,
},
- .num_resources = 0,
+ .resource = &orion_wdt_resource,
+ .num_resources = 1,
};
void __init orion_wdt_init(unsigned long tclk)
diff --git a/arch/arm/plat-orion/include/plat/audio.h b/arch/arm/plat-orion/include/plat/audio.h
index 885f8abd927b..d6a55bd2e578 100644
--- a/arch/arm/plat-orion/include/plat/audio.h
+++ b/arch/arm/plat-orion/include/plat/audio.h
@@ -2,7 +2,6 @@
#define __PLAT_AUDIO_H
struct kirkwood_asoc_platform_data {
- u32 tclk;
int burst;
};
#endif
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index 7c756fb189f7..afeae8978a8d 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -97,6 +97,7 @@ static struct atmel_nand_data atngw100mkii_nand_data __initdata = {
.rdy_pin = GPIO_PIN_PB(28),
.enable_pin = GPIO_PIN_PE(23),
.bus_width_16 = true,
+ .ecc_mode = NAND_ECC_SOFT,
.parts = nand_partitions,
.num_parts = ARRAY_SIZE(nand_partitions),
};
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index c56ddac85d61..dc5263321480 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -95,6 +95,7 @@ static struct atmel_nand_data atstk1006_nand_data __initdata = {
.ale = 22,
.rdy_pin = GPIO_PIN_PB(30),
.enable_pin = GPIO_PIN_PB(29),
+ .ecc_mode = NAND_ECC_SOFT,
.parts = nand_partitions,
.num_parts = ARRAY_SIZE(num_partitions),
};
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index 67b111ce332d..71733866cb4f 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -7,6 +7,7 @@
#include <linux/types.h>
#include <linux/serial.h>
#include <linux/platform_data/macb.h>
+#include <linux/platform_data/atmel_nand.h>
#define GPIO_PIN_NONE (-1)
@@ -116,18 +117,6 @@ struct platform_device *
at32_add_device_cf(unsigned int id, unsigned int extint,
struct cf_platform_data *data);
-/* NAND / SmartMedia */
-struct atmel_nand_data {
- int enable_pin; /* chip enable */
- int det_pin; /* card detect */
- int rdy_pin; /* ready/busy */
- u8 rdy_pin_active_low; /* rdy_pin value is inverted */
- u8 ale; /* address line number connected to ALE */
- u8 cle; /* address line number connected to CLE */
- u8 bus_width_16; /* buswidth is 16 bit */
- struct mtd_partition *parts;
- unsigned int num_parts;
-};
struct platform_device *
at32_add_device_nand(unsigned int id, struct atmel_nand_data *data);
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index a651779d9ff7..c0330a41db03 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -14,8 +14,15 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
-
-#include <asm/gpio.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/of_i2c.h>
+
+struct i2c_gpio_private_data {
+ struct i2c_adapter adap;
+ struct i2c_algo_bit_data bit_data;
+ struct i2c_gpio_platform_data pdata;
+};
/* Toggle SDA by changing the direction of the pin */
static void i2c_gpio_setsda_dir(void *data, int state)
@@ -78,24 +85,62 @@ static int i2c_gpio_getscl(void *data)
return gpio_get_value(pdata->scl_pin);
}
+static int __devinit of_i2c_gpio_probe(struct device_node *np,
+ struct i2c_gpio_platform_data *pdata)
+{
+ u32 reg;
+
+ if (of_gpio_count(np) < 2)
+ return -ENODEV;
+
+ pdata->sda_pin = of_get_gpio(np, 0);
+ pdata->scl_pin = of_get_gpio(np, 1);
+
+ if (!gpio_is_valid(pdata->sda_pin) || !gpio_is_valid(pdata->scl_pin)) {
+ pr_err("%s: invalid GPIO pins, sda=%d/scl=%d\n",
+ np->full_name, pdata->sda_pin, pdata->scl_pin);
+ return -ENODEV;
+ }
+
+ of_property_read_u32(np, "i2c-gpio,delay-us", &pdata->udelay);
+
+ if (!of_property_read_u32(np, "i2c-gpio,timeout-ms", &reg))
+ pdata->timeout = msecs_to_jiffies(reg);
+
+ pdata->sda_is_open_drain =
+ of_property_read_bool(np, "i2c-gpio,sda-open-drain");
+ pdata->scl_is_open_drain =
+ of_property_read_bool(np, "i2c-gpio,scl-open-drain");
+ pdata->scl_is_output_only =
+ of_property_read_bool(np, "i2c-gpio,scl-output-only");
+
+ return 0;
+}
+
static int __devinit i2c_gpio_probe(struct platform_device *pdev)
{
+ struct i2c_gpio_private_data *priv;
struct i2c_gpio_platform_data *pdata;
struct i2c_algo_bit_data *bit_data;
struct i2c_adapter *adap;
int ret;
- pdata = pdev->dev.platform_data;
- if (!pdata)
- return -ENXIO;
-
- ret = -ENOMEM;
- adap = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
- if (!adap)
- goto err_alloc_adap;
- bit_data = kzalloc(sizeof(struct i2c_algo_bit_data), GFP_KERNEL);
- if (!bit_data)
- goto err_alloc_bit_data;
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ adap = &priv->adap;
+ bit_data = &priv->bit_data;
+ pdata = &priv->pdata;
+
+ if (pdev->dev.of_node) {
+ ret = of_i2c_gpio_probe(pdev->dev.of_node, pdata);
+ if (ret)
+ return ret;
+ } else {
+ if (!pdev->dev.platform_data)
+ return -ENXIO;
+ memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
+ }
ret = gpio_request(pdata->sda_pin, "sda");
if (ret)
@@ -143,6 +188,7 @@ static int __devinit i2c_gpio_probe(struct platform_device *pdev)
adap->algo_data = bit_data;
adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
adap->dev.parent = &pdev->dev;
+ adap->dev.of_node = pdev->dev.of_node;
/*
* If "dev->id" is negative we consider it as zero.
@@ -154,7 +200,9 @@ static int __devinit i2c_gpio_probe(struct platform_device *pdev)
if (ret)
goto err_add_bus;
- platform_set_drvdata(pdev, adap);
+ of_i2c_register_devices(adap);
+
+ platform_set_drvdata(pdev, priv);
dev_info(&pdev->dev, "using pins %u (SDA) and %u (SCL%s)\n",
pdata->sda_pin, pdata->scl_pin,
@@ -168,34 +216,40 @@ err_add_bus:
err_request_scl:
gpio_free(pdata->sda_pin);
err_request_sda:
- kfree(bit_data);
-err_alloc_bit_data:
- kfree(adap);
-err_alloc_adap:
return ret;
}
static int __devexit i2c_gpio_remove(struct platform_device *pdev)
{
+ struct i2c_gpio_private_data *priv;
struct i2c_gpio_platform_data *pdata;
struct i2c_adapter *adap;
- adap = platform_get_drvdata(pdev);
- pdata = pdev->dev.platform_data;
+ priv = platform_get_drvdata(pdev);
+ adap = &priv->adap;
+ pdata = &priv->pdata;
i2c_del_adapter(adap);
gpio_free(pdata->scl_pin);
gpio_free(pdata->sda_pin);
- kfree(adap->algo_data);
- kfree(adap);
return 0;
}
+#if defined(CONFIG_OF)
+static const struct of_device_id i2c_gpio_dt_ids[] = {
+ { .compatible = "i2c-gpio", },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, i2c_gpio_dt_ids);
+#endif
+
static struct platform_driver i2c_gpio_driver = {
.driver = {
.name = "i2c-gpio",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(i2c_gpio_dt_ids),
},
.probe = i2c_gpio_probe,
.remove = __devexit_p(i2c_gpio_remove),
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 35b4fb55dbd6..ae7e37d9ac17 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -27,6 +27,10 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/of_mtd.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
@@ -34,22 +38,10 @@
#include <linux/dmaengine.h>
#include <linux/gpio.h>
#include <linux/io.h>
+#include <linux/platform_data/atmel.h>
-#include <mach/board.h>
#include <mach/cpu.h>
-#ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW
-#define hard_ecc 1
-#else
-#define hard_ecc 0
-#endif
-
-#ifdef CONFIG_MTD_NAND_ATMEL_ECC_NONE
-#define no_ecc 1
-#else
-#define no_ecc 0
-#endif
-
static int use_dma = 1;
module_param(use_dma, int, 0);
@@ -95,7 +87,7 @@ struct atmel_nand_host {
struct mtd_info mtd;
void __iomem *io_base;
dma_addr_t io_phys;
- struct atmel_nand_data *board;
+ struct atmel_nand_data board;
struct device *dev;
void __iomem *ecc;
@@ -113,8 +105,8 @@ static int cpu_has_dma(void)
*/
static void atmel_nand_enable(struct atmel_nand_host *host)
{
- if (gpio_is_valid(host->board->enable_pin))
- gpio_set_value(host->board->enable_pin, 0);
+ if (gpio_is_valid(host->board.enable_pin))
+ gpio_set_value(host->board.enable_pin, 0);
}
/*
@@ -122,8 +114,8 @@ static void atmel_nand_enable(struct atmel_nand_host *host)
*/
static void atmel_nand_disable(struct atmel_nand_host *host)
{
- if (gpio_is_valid(host->board->enable_pin))
- gpio_set_value(host->board->enable_pin, 1);
+ if (gpio_is_valid(host->board.enable_pin))
+ gpio_set_value(host->board.enable_pin, 1);
}
/*
@@ -144,9 +136,9 @@ static void atmel_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl
return;
if (ctrl & NAND_CLE)
- writeb(cmd, host->io_base + (1 << host->board->cle));
+ writeb(cmd, host->io_base + (1 << host->board.cle));
else
- writeb(cmd, host->io_base + (1 << host->board->ale));
+ writeb(cmd, host->io_base + (1 << host->board.ale));
}
/*
@@ -157,8 +149,8 @@ static int atmel_nand_device_ready(struct mtd_info *mtd)
struct nand_chip *nand_chip = mtd->priv;
struct atmel_nand_host *host = nand_chip->priv;
- return gpio_get_value(host->board->rdy_pin) ^
- !!host->board->rdy_pin_active_low;
+ return gpio_get_value(host->board.rdy_pin) ^
+ !!host->board.rdy_pin_active_low;
}
/*
@@ -273,7 +265,7 @@ static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
if (atmel_nand_dma_op(mtd, buf, len, 1) == 0)
return;
- if (host->board->bus_width_16)
+ if (host->board.bus_width_16)
atmel_read_buf16(mtd, buf, len);
else
atmel_read_buf8(mtd, buf, len);
@@ -289,7 +281,7 @@ static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) == 0)
return;
- if (host->board->bus_width_16)
+ if (host->board.bus_width_16)
atmel_write_buf16(mtd, buf, len);
else
atmel_write_buf8(mtd, buf, len);
@@ -481,6 +473,56 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
}
}
+#if defined(CONFIG_OF)
+static int __devinit atmel_of_init_port(struct atmel_nand_host *host,
+ struct device_node *np)
+{
+ u32 val;
+ int ecc_mode;
+ struct atmel_nand_data *board = &host->board;
+ enum of_gpio_flags flags;
+
+ if (of_property_read_u32(np, "atmel,nand-addr-offset", &val) == 0) {
+ if (val >= 32) {
+ dev_err(host->dev, "invalid addr-offset %u\n", val);
+ return -EINVAL;
+ }
+ board->ale = val;
+ }
+
+ if (of_property_read_u32(np, "atmel,nand-cmd-offset", &val) == 0) {
+ if (val >= 32) {
+ dev_err(host->dev, "invalid cmd-offset %u\n", val);
+ return -EINVAL;
+ }
+ board->cle = val;
+ }
+
+ ecc_mode = of_get_nand_ecc_mode(np);
+
+ board->ecc_mode = ecc_mode < 0 ? NAND_ECC_SOFT : ecc_mode;
+
+ board->on_flash_bbt = of_get_nand_on_flash_bbt(np);
+
+ if (of_get_nand_bus_width(np) == 16)
+ board->bus_width_16 = 1;
+
+ board->rdy_pin = of_get_gpio_flags(np, 0, &flags);
+ board->rdy_pin_active_low = (flags == OF_GPIO_ACTIVE_LOW);
+
+ board->enable_pin = of_get_gpio(np, 1);
+ board->det_pin = of_get_gpio(np, 2);
+
+ return 0;
+}
+#else
+static int __devinit atmel_of_init_port(struct atmel_nand_host *host,
+ struct device_node *np)
+{
+ return -EINVAL;
+}
+#endif
+
/*
* Probe for the NAND device.
*/
@@ -491,6 +533,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
struct nand_chip *nand_chip;
struct resource *regs;
struct resource *mem;
+ struct mtd_part_parser_data ppdata = {};
int res;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -517,8 +560,15 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
mtd = &host->mtd;
nand_chip = &host->nand_chip;
- host->board = pdev->dev.platform_data;
host->dev = &pdev->dev;
+ if (pdev->dev.of_node) {
+ res = atmel_of_init_port(host, pdev->dev.of_node);
+ if (res)
+ goto err_nand_ioremap;
+ } else {
+ memcpy(&host->board, pdev->dev.platform_data,
+ sizeof(struct atmel_nand_data));
+ }
nand_chip->priv = host; /* link the private data structures */
mtd->priv = nand_chip;
@@ -529,26 +579,25 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
nand_chip->IO_ADDR_W = host->io_base;
nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl;
- if (gpio_is_valid(host->board->rdy_pin))
+ if (gpio_is_valid(host->board.rdy_pin))
nand_chip->dev_ready = atmel_nand_device_ready;
+ nand_chip->ecc.mode = host->board.ecc_mode;
+
regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!regs && hard_ecc) {
+ if (!regs && nand_chip->ecc.mode == NAND_ECC_HW) {
printk(KERN_ERR "atmel_nand: can't get I/O resource "
"regs\nFalling back on software ECC\n");
+ nand_chip->ecc.mode = NAND_ECC_SOFT;
}
- nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */
- if (no_ecc)
- nand_chip->ecc.mode = NAND_ECC_NONE;
- if (hard_ecc && regs) {
+ if (nand_chip->ecc.mode == NAND_ECC_HW) {
host->ecc = ioremap(regs->start, resource_size(regs));
if (host->ecc == NULL) {
printk(KERN_ERR "atmel_nand: ioremap failed\n");
res = -EIO;
goto err_ecc_ioremap;
}
- nand_chip->ecc.mode = NAND_ECC_HW;
nand_chip->ecc.calculate = atmel_nand_calculate;
nand_chip->ecc.correct = atmel_nand_correct;
nand_chip->ecc.hwctl = atmel_nand_hwctl;
@@ -558,7 +607,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
nand_chip->chip_delay = 20; /* 20us command delay time */
- if (host->board->bus_width_16) /* 16-bit bus width */
+ if (host->board.bus_width_16) /* 16-bit bus width */
nand_chip->options |= NAND_BUSWIDTH_16;
nand_chip->read_buf = atmel_read_buf;
@@ -567,15 +616,15 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, host);
atmel_nand_enable(host);
- if (gpio_is_valid(host->board->det_pin)) {
- if (gpio_get_value(host->board->det_pin)) {
+ if (gpio_is_valid(host->board.det_pin)) {
+ if (gpio_get_value(host->board.det_pin)) {
printk(KERN_INFO "No SmartMedia card inserted.\n");
res = -ENXIO;
goto err_no_card;
}
}
- if (on_flash_bbt) {
+ if (host->board.on_flash_bbt || on_flash_bbt) {
printk(KERN_INFO "atmel_nand: Use On Flash BBT\n");
nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
}
@@ -650,8 +699,9 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
}
mtd->name = "atmel_nand";
- res = mtd_device_parse_register(mtd, NULL, 0,
- host->board->parts, host->board->num_parts);
+ ppdata.of_node = pdev->dev.of_node;
+ res = mtd_device_parse_register(mtd, NULL, &ppdata,
+ host->board.parts, host->board.num_parts);
if (!res)
return res;
@@ -695,11 +745,21 @@ static int __exit atmel_nand_remove(struct platform_device *pdev)
return 0;
}
+#if defined(CONFIG_OF)
+static const struct of_device_id atmel_nand_dt_ids[] = {
+ { .compatible = "atmel,at91rm9200-nand" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmel_nand_dt_ids);
+#endif
+
static struct platform_driver atmel_nand_driver = {
.remove = __exit_p(atmel_nand_remove),
.driver = {
.name = "atmel_nand",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(atmel_nand_dt_ids),
},
};
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index 6ea51dcbc728..8e84ce9765a9 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -91,4 +91,8 @@ config OF_PCI_IRQ
help
OpenFirmware PCI IRQ routing helpers
+config OF_MTD
+ depends on MTD
+ def_bool y
+
endmenu # OF
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index a73f5a51ff4c..aa90e602c8a7 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_OF_SELFTEST) += selftest.o
obj-$(CONFIG_OF_MDIO) += of_mdio.o
obj-$(CONFIG_OF_PCI) += of_pci.o
obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o
+obj-$(CONFIG_OF_MTD) += of_mtd.o
diff --git a/drivers/of/of_mtd.c b/drivers/of/of_mtd.c
new file mode 100644
index 000000000000..e7cad627a5d1
--- /dev/null
+++ b/drivers/of/of_mtd.c
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * OF helpers for mtd.
+ *
+ * This file is released under the GPLv2
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/of_mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/export.h>
+
+/**
+ * It maps 'enum nand_ecc_modes_t' found in include/linux/mtd/nand.h
+ * into the device tree binding of 'nand-ecc', so that MTD
+ * device driver can get nand ecc from device tree.
+ */
+static const char *nand_ecc_modes[] = {
+ [NAND_ECC_NONE] = "none",
+ [NAND_ECC_SOFT] = "soft",
+ [NAND_ECC_HW] = "hw",
+ [NAND_ECC_HW_SYNDROME] = "hw_syndrome",
+ [NAND_ECC_HW_OOB_FIRST] = "hw_oob_first",
+ [NAND_ECC_SOFT_BCH] = "soft_bch",
+};
+
+/**
+ * of_get_nand_ecc_mode - Get nand ecc mode for given device_node
+ * @np: Pointer to the given device_node
+ *
+ * The function gets ecc mode string from property 'nand-ecc-mode',
+ * and return its index in nand_ecc_modes table, or errno in error case.
+ */
+const int of_get_nand_ecc_mode(struct device_node *np)
+{
+ const char *pm;
+ int err, i;
+
+ err = of_property_read_string(np, "nand-ecc-mode", &pm);
+ if (err < 0)
+ return err;
+
+ for (i = 0; i < ARRAY_SIZE(nand_ecc_modes); i++)
+ if (!strcasecmp(pm, nand_ecc_modes[i]))
+ return i;
+
+ return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(of_get_nand_ecc_mode);
+
+/**
+ * of_get_nand_bus_width - Get nand bus witdh for given device_node
+ * @np: Pointer to the given device_node
+ *
+ * return bus width option, or errno in error case.
+ */
+int of_get_nand_bus_width(struct device_node *np)
+{
+ u32 val;
+
+ if (of_property_read_u32(np, "nand-bus-width", &val))
+ return 8;
+
+ switch(val) {
+ case 8:
+ case 16:
+ return val;
+ default:
+ return -EIO;
+ }
+}
+EXPORT_SYMBOL_GPL(of_get_nand_bus_width);
+
+/**
+ * of_get_nand_on_flash_bbt - Get nand on flash bbt for given device_node
+ * @np: Pointer to the given device_node
+ *
+ * return true if present false other wise
+ */
+bool of_get_nand_on_flash_bbt(struct device_node *np)
+{
+ return of_property_read_bool(np, "nand-on-flash-bbt");
+}
+EXPORT_SYMBOL_GPL(of_get_nand_on_flash_bbt);
diff --git a/drivers/rtc/rtc-mv.c b/drivers/rtc/rtc-mv.c
index 1300962486d1..b2185f4255aa 100644
--- a/drivers/rtc/rtc-mv.c
+++ b/drivers/rtc/rtc-mv.c
@@ -12,6 +12,7 @@
#include <linux/bcd.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
#include <linux/delay.h>
#include <linux/gfp.h>
#include <linux/module.h>
@@ -294,11 +295,19 @@ static int __exit mv_rtc_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_OF
+static struct of_device_id rtc_mv_of_match_table[] = {
+ { .compatible = "mrvl,orion-rtc", },
+ {}
+};
+#endif
+
static struct platform_driver mv_rtc_driver = {
.remove = __exit_p(mv_rtc_remove),
.driver = {
.name = "rtc-mv",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(rtc_mv_of_match_table),
},
};
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index 13448c832c44..e496f799b7a9 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -359,11 +359,6 @@ static int orion_spi_setup(struct spi_device *spi)
orion_spi = spi_master_get_devdata(spi->master);
- /* Fix ac timing if required. */
- if (orion_spi->spi_info->enable_clock_fix)
- orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG,
- (1 << 14));
-
if ((spi->max_speed_hz == 0)
|| (spi->max_speed_hz > orion_spi->max_speed))
spi->max_speed_hz = orion_spi->max_speed;
diff --git a/drivers/staging/ste_rmi4/Makefile b/drivers/staging/ste_rmi4/Makefile
index 176f46900571..e4c03351420f 100644
--- a/drivers/staging/ste_rmi4/Makefile
+++ b/drivers/staging/ste_rmi4/Makefile
@@ -2,4 +2,4 @@
# Makefile for the RMI4 touchscreen driver.
#
obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4) += synaptics_i2c_rmi4.o
-obj-$(CONFIG_MACH_U8500) += board-mop500-u8500uib-rmi4.o
+obj-$(CONFIG_MACH_MOP500) += board-mop500-u8500uib-rmi4.o
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 48ac6e781ba2..cbd8f5f80596 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -44,7 +44,7 @@ config USB_ARCH_HAS_EHCI
default y if PPC_MPC512x
default y if ARCH_IXP4XX
default y if ARCH_W90X900
- default y if ARCH_AT91SAM9G45
+ default y if ARCH_AT91
default y if ARCH_MXC
default y if ARCH_OMAP3
default y if ARCH_CNS3XXX
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 26c0b75f152e..2633f7595116 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -137,7 +137,7 @@ choice
config USB_AT91
tristate "Atmel AT91 USB Device Port"
- depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91SAM9G45
+ depends on ARCH_AT91
help
Many Atmel AT91 processors (such as the AT91RM2000) have a
full speed USB Device Port with support for five configurable
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 2db5f68f7960..36fd2b4b49a2 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -29,6 +29,8 @@
#include <linux/clk.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <asm/byteorder.h>
#include <mach/hardware.h>
@@ -1707,7 +1709,27 @@ static void at91udc_shutdown(struct platform_device *dev)
spin_unlock_irqrestore(&udc->lock, flags);
}
-static int __init at91udc_probe(struct platform_device *pdev)
+static void __devinit at91udc_of_init(struct at91_udc *udc,
+ struct device_node *np)
+{
+ struct at91_udc_data *board = &udc->board;
+ u32 val;
+ enum of_gpio_flags flags;
+
+ if (of_property_read_u32(np, "atmel,vbus-polled", &val) == 0)
+ board->vbus_polled = 1;
+
+ board->vbus_pin = of_get_named_gpio_flags(np, "atmel,vbus-gpio", 0,
+ &flags);
+ board->vbus_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0;
+
+ board->pullup_pin = of_get_named_gpio_flags(np, "atmel,pullup-gpio", 0,
+ &flags);
+
+ board->pullup_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0;
+}
+
+static int __devinit at91udc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct at91_udc *udc;
@@ -1742,7 +1764,11 @@ static int __init at91udc_probe(struct platform_device *pdev)
/* init software state */
udc = &controller;
udc->gadget.dev.parent = dev;
- udc->board = *(struct at91_udc_data *) dev->platform_data;
+ if (pdev->dev.of_node)
+ at91udc_of_init(udc, pdev->dev.of_node);
+ else
+ memcpy(&udc->board, dev->platform_data,
+ sizeof(struct at91_udc_data));
udc->pdev = pdev;
udc->enabled = 0;
spin_lock_init(&udc->lock);
@@ -1971,6 +1997,15 @@ static int at91udc_resume(struct platform_device *pdev)
#define at91udc_resume NULL
#endif
+#if defined(CONFIG_OF)
+static const struct of_device_id at91_udc_dt_ids[] = {
+ { .compatible = "atmel,at91rm9200-udc" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, at91_udc_dt_ids);
+#endif
+
static struct platform_driver at91_udc_driver = {
.remove = __exit_p(at91udc_remove),
.shutdown = at91udc_shutdown,
@@ -1979,6 +2014,7 @@ static struct platform_driver at91_udc_driver = {
.driver = {
.name = (char *) driver_name,
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(at91_udc_dt_ids),
},
};
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index a5a3ef1f0096..19f318ababa2 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -13,6 +13,7 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/of_platform.h>
/* interface and function clocks */
static struct clk *iclk, *fclk;
@@ -115,6 +116,8 @@ static const struct hc_driver ehci_atmel_hc_driver = {
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
+static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32);
+
static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
@@ -137,6 +140,13 @@ static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev)
goto fail_create_hcd;
}
+ /* Right now device-tree probed devices don't get dma_mask set.
+ * Since shared usb code relies on it, set it here for now.
+ * Once we have dma capability bindings this can go away.
+ */
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &at91_ehci_dma_mask;
+
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
retval = -ENOMEM;
@@ -225,9 +235,21 @@ static int __devexit ehci_atmel_drv_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id atmel_ehci_dt_ids[] = {
+ { .compatible = "atmel,at91sam9g45-ehci" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmel_ehci_dt_ids);
+#endif
+
static struct platform_driver ehci_atmel_driver = {
.probe = ehci_atmel_drv_probe,
.remove = __devexit_p(ehci_atmel_drv_remove),
.shutdown = usb_hcd_platform_shutdown,
- .driver.name = "atmel-ehci",
+ .driver = {
+ .name = "atmel-ehci",
+ .of_match_table = of_match_ptr(atmel_ehci_dt_ids),
+ },
};
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 8e855eb0bf89..db8963f5fbce 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -14,6 +14,8 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
#include <mach/hardware.h>
#include <asm/gpio.h>
@@ -477,13 +479,109 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
return IRQ_HANDLED;
}
+#ifdef CONFIG_OF
+static const struct of_device_id at91_ohci_dt_ids[] = {
+ { .compatible = "atmel,at91rm9200-ohci" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids);
+
+static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32);
+
+static int __devinit ohci_at91_of_init(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int i, ret, gpio;
+ enum of_gpio_flags flags;
+ struct at91_usbh_data *pdata;
+ u32 ports;
+
+ if (!np)
+ return 0;
+
+ /* Right now device-tree probed devices don't get dma_mask set.
+ * Since shared usb code relies on it, set it here for now.
+ * Once we have dma capability bindings this can go away.
+ */
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &at91_ohci_dma_mask;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ if (!of_property_read_u32(np, "num-ports", &ports))
+ pdata->ports = ports;
+
+ for (i = 0; i < 2; i++) {
+ gpio = of_get_named_gpio_flags(np, "atmel,vbus-gpio", i, &flags);
+ pdata->vbus_pin[i] = gpio;
+ if (!gpio_is_valid(gpio))
+ continue;
+ pdata->vbus_pin_active_low[i] = flags & OF_GPIO_ACTIVE_LOW;
+ ret = gpio_request(gpio, "ohci_vbus");
+ if (ret) {
+ dev_warn(&pdev->dev, "can't request vbus gpio %d", gpio);
+ continue;
+ }
+ ret = gpio_direction_output(gpio, !(flags & OF_GPIO_ACTIVE_LOW) ^ 1);
+ if (ret)
+ dev_warn(&pdev->dev, "can't put vbus gpio %d as output %d",
+ !(flags & OF_GPIO_ACTIVE_LOW) ^ 1, gpio);
+ }
+
+ for (i = 0; i < 2; i++) {
+ gpio = of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags);
+ pdata->overcurrent_pin[i] = gpio;
+ if (!gpio_is_valid(gpio))
+ continue;
+ ret = gpio_request(gpio, "ohci_overcurrent");
+ if (ret) {
+ dev_err(&pdev->dev, "can't request overcurrent gpio %d", gpio);
+ continue;
+ }
+
+ ret = gpio_direction_input(gpio);
+ if (ret) {
+ dev_err(&pdev->dev, "can't configure overcurrent gpio %d as input", gpio);
+ continue;
+ }
+
+ ret = request_irq(gpio_to_irq(gpio),
+ ohci_hcd_at91_overcurrent_irq,
+ IRQF_SHARED, "ohci_overcurrent", pdev);
+ if (ret) {
+ gpio_free(gpio);
+ dev_warn(& pdev->dev, "cannot get GPIO IRQ for overcurrent\n");
+ }
+ }
+
+ pdev->dev.platform_data = pdata;
+
+ return 0;
+}
+#else
+static int __devinit ohci_at91_of_init(struct platform_device *pdev)
+{
+ return 0;
+}
+#endif
+
/*-------------------------------------------------------------------------*/
static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
{
- struct at91_usbh_data *pdata = pdev->dev.platform_data;
+ struct at91_usbh_data *pdata;
int i;
+ i = ohci_at91_of_init(pdev);
+
+ if (i)
+ return i;
+
+ pdata = pdev->dev.platform_data;
+
if (pdata) {
for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
if (!gpio_is_valid(pdata->vbus_pin[i]))
@@ -596,5 +694,6 @@ static struct platform_driver ohci_hcd_at91_driver = {
.driver = {
.name = "at91_ohci",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(at91_ohci_dt_ids),
},
};
diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index 4ad78f868515..1368e4ca3100 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -28,9 +28,9 @@
/*
* Watchdog timer block registers.
*/
-#define TIMER_CTRL (TIMER_VIRT_BASE + 0x0000)
+#define TIMER_CTRL 0x0000
#define WDT_EN 0x0010
-#define WDT_VAL (TIMER_VIRT_BASE + 0x0024)
+#define WDT_VAL 0x0024
#define WDT_MAX_CYCLE_COUNT 0xffffffff
#define WDT_IN_USE 0
@@ -40,6 +40,7 @@ static int nowayout = WATCHDOG_NOWAYOUT;
static int heartbeat = -1; /* module parameter (seconds) */
static unsigned int wdt_max_duration; /* (seconds) */
static unsigned int wdt_tclk;
+static void __iomem *wdt_reg;
static unsigned long wdt_status;
static DEFINE_SPINLOCK(wdt_lock);
@@ -48,7 +49,7 @@ static void orion_wdt_ping(void)
spin_lock(&wdt_lock);
/* Reload watchdog duration */
- writel(wdt_tclk * heartbeat, WDT_VAL);
+ writel(wdt_tclk * heartbeat, wdt_reg + WDT_VAL);
spin_unlock(&wdt_lock);
}
@@ -60,7 +61,7 @@ static void orion_wdt_enable(void)
spin_lock(&wdt_lock);
/* Set watchdog duration */
- writel(wdt_tclk * heartbeat, WDT_VAL);
+ writel(wdt_tclk * heartbeat, wdt_reg + WDT_VAL);
/* Clear watchdog timer interrupt */
reg = readl(BRIDGE_CAUSE);
@@ -68,9 +69,9 @@ static void orion_wdt_enable(void)
writel(reg, BRIDGE_CAUSE);
/* Enable watchdog timer */
- reg = readl(TIMER_CTRL);
+ reg = readl(wdt_reg + TIMER_CTRL);
reg |= WDT_EN;
- writel(reg, TIMER_CTRL);
+ writel(reg, wdt_reg + TIMER_CTRL);
/* Enable reset on watchdog */
reg = readl(RSTOUTn_MASK);
@@ -92,9 +93,9 @@ static void orion_wdt_disable(void)
writel(reg, RSTOUTn_MASK);
/* Disable watchdog timer */
- reg = readl(TIMER_CTRL);
+ reg = readl(wdt_reg + TIMER_CTRL);
reg &= ~WDT_EN;
- writel(reg, TIMER_CTRL);
+ writel(reg, wdt_reg + TIMER_CTRL);
spin_unlock(&wdt_lock);
}
@@ -102,7 +103,7 @@ static void orion_wdt_disable(void)
static int orion_wdt_get_timeleft(int *time_left)
{
spin_lock(&wdt_lock);
- *time_left = readl(WDT_VAL) / wdt_tclk;
+ *time_left = readl(wdt_reg + WDT_VAL) / wdt_tclk;
spin_unlock(&wdt_lock);
return 0;
}
@@ -236,6 +237,7 @@ static struct miscdevice orion_wdt_miscdev = {
static int __devinit orion_wdt_probe(struct platform_device *pdev)
{
struct orion_wdt_platform_data *pdata = pdev->dev.platform_data;
+ struct resource *res;
int ret;
if (pdata) {
@@ -245,6 +247,10 @@ static int __devinit orion_wdt_probe(struct platform_device *pdev)
return -ENODEV;
}
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ wdt_reg = ioremap(res->start, resource_size(res));
+
if (orion_wdt_miscdev.parent)
return -EBUSY;
orion_wdt_miscdev.parent = &pdev->dev;
diff --git a/include/linux/of.h b/include/linux/of.h
index d46a18ffbebb..ba5d8494f2e1 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -361,6 +361,22 @@ static inline int of_machine_is_compatible(const char *compat)
#define of_match_node(_matches, _node) NULL
#endif /* CONFIG_OF */
+/**
+ * of_property_read_bool - Findfrom a property
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ *
+ * Search for a property in a device node.
+ * Returns true if the property exist false otherwise.
+ */
+static inline bool of_property_read_bool(const struct device_node *np,
+ const char *propname)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+
+ return prop ? true : false;
+}
+
static inline int of_property_read_u32(const struct device_node *np,
const char *propname,
u32 *out_value)
diff --git a/include/linux/of_mtd.h b/include/linux/of_mtd.h
new file mode 100644
index 000000000000..bae1b6094c63
--- /dev/null
+++ b/include/linux/of_mtd.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * OF helpers for mtd.
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_OF_MTD_H
+#define __LINUX_OF_NET_H
+
+#ifdef CONFIG_OF_MTD
+#include <linux/of.h>
+extern const int of_get_nand_ecc_mode(struct device_node *np);
+int of_get_nand_bus_width(struct device_node *np);
+bool of_get_nand_on_flash_bbt(struct device_node *np);
+#endif
+
+#endif /* __LINUX_OF_MTD_H */
diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h
new file mode 100644
index 000000000000..d056263545b1
--- /dev/null
+++ b/include/linux/platform_data/atmel.h
@@ -0,0 +1,27 @@
+/*
+ * atmel platform data
+ *
+ * GPL v2 Only
+ */
+
+#ifndef __ATMEL_NAND_H__
+#define __ATMEL_NAND_H__
+
+#include <linux/mtd/nand.h>
+
+ /* NAND / SmartMedia */
+struct atmel_nand_data {
+ int enable_pin; /* chip enable */
+ int det_pin; /* card detect */
+ int rdy_pin; /* ready/busy */
+ u8 rdy_pin_active_low; /* rdy_pin value is inverted */
+ u8 ale; /* address line number connected to ALE */
+ u8 cle; /* address line number connected to CLE */
+ u8 bus_width_16; /* buswidth is 16 bit */
+ u8 ecc_mode; /* ecc mode */
+ u8 on_flash_bbt; /* bbt on flash */
+ struct mtd_partition *parts;
+ unsigned int num_parts;
+};
+
+#endif /* __ATMEL_NAND_H__ */
diff --git a/include/linux/spi/orion_spi.h b/include/linux/spi/orion_spi.h
index decf6d8c77b7..b4d9fa6f797c 100644
--- a/include/linux/spi/orion_spi.h
+++ b/include/linux/spi/orion_spi.h
@@ -11,7 +11,6 @@
struct orion_spi_info {
u32 tclk; /* no <linux/clk.h> support yet */
- u32 enable_clock_fix;
};