scsi: qla2xxx: Insert spaces where required

Improve source code readability by inserting spaces where these are
required according to the coding standard. This patch only inserts
whitespace and does not make any other changes.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

9 files changed, 23 insertions, 23 deletions

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index fb4d844e64fa..8d560c562e9c 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -888,7 +888,7 @@ do_read:
 		count = 0;
 	}
 
-	count = actual_size > count ? count: actual_size;
+	count = actual_size > count ? count : actual_size;
 	memcpy(buf, ha->xgmac_data, count);
 
 	return count;
@@ -2811,8 +2811,8 @@ qla24xx_vport_create(struct fc_vport *fc_vport, bool disable)
 
 	/* initialized vport states */
 	atomic_set(&vha->loop_state, LOOP_DOWN);
-	vha->vp_err_state=  VP_ERR_PORTDWN;
-	vha->vp_prev_err_state=  VP_ERR_UNKWN;
+	vha->vp_err_state = VP_ERR_PORTDWN;
+	vha->vp_prev_err_state = VP_ERR_UNKWN;
 	/* Check if physical ha port is Up */
 	if (atomic_read(&base_vha->loop_state) == LOOP_DOWN ||
 	    atomic_read(&base_vha->loop_state) == LOOP_DEAD) {
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 94da4b9927e9..9e80646722e2 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -445,7 +445,7 @@ qla2xxx_dump_ram(struct qla_hw_data *ha, uint32_t addr, uint16_t *ram,
 		}
 	}
 
-	*nxt = rval == QLA_SUCCESS ? &ram[cnt]: NULL;
+	*nxt = rval == QLA_SUCCESS ? &ram[cnt] : NULL;
 	return rval;
 }
 
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index b8da57b862e4..4235769ec4cc 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -2448,7 +2448,7 @@ qla2x00_fdmiv2_rpa(scsi_qla_host_t *vha)
 	eiter->type = cpu_to_be16(FDMI_PORT_MAX_FRAME_SIZE);
 	eiter->len = cpu_to_be16(4 + 4);
 	eiter->a.max_frame_size = IS_FWI2_CAPABLE(ha) ?
-	    le16_to_cpu(icb24->frame_payload_size):
+	    le16_to_cpu(icb24->frame_payload_size) :
 	    le16_to_cpu(ha->init_cb->frame_payload_size);
 	eiter->a.max_frame_size = cpu_to_be32(eiter->a.max_frame_size);
 	size += 4 + 4;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index c05d507a3d64..02b463c8f3eb 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -4711,7 +4711,7 @@ qla2x00_nvram_config(scsi_qla_host_t *vha)
 			ha->zio_mode = icb->add_firmware_options[0] &
 			    (BIT_3 | BIT_2 | BIT_1 | BIT_0);
 			ha->zio_timer = icb->interrupt_delay_timer ?
-			    icb->interrupt_delay_timer: 2;
+			    icb->interrupt_delay_timer : 2;
 		}
 		icb->add_firmware_options[0] &=
 		    ~(BIT_3 | BIT_2 | BIT_1 | BIT_0);
@@ -4744,7 +4744,7 @@ qla2x00_rport_del(void *data)
 	unsigned long flags;
 
 	spin_lock_irqsave(fcport->vha->host->host_lock, flags);
-	rport = fcport->drport ? fcport->drport: fcport->rport;
+	rport = fcport->drport ? fcport->drport : fcport->rport;
 	fcport->drport = NULL;
 	spin_unlock_irqrestore(fcport->vha->host->host_lock, flags);
 	if (rport) {
@@ -7208,11 +7208,11 @@ qla24xx_nvram_config(scsi_qla_host_t *vha)
 	ha->flags.disable_risc_code_load = 0;
 	ha->flags.enable_lip_reset = 0;
 	ha->flags.enable_lip_full_login =
-	    le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0;
+	    le32_to_cpu(nv->host_p) & BIT_10 ? 1 : 0;
 	ha->flags.enable_target_reset =
-	    le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0;
+	    le32_to_cpu(nv->host_p) & BIT_11 ? 1 : 0;
 	ha->flags.enable_led_scheme = 0;
-	ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0;
+	ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1 : 0;
 
 	ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) &
 	    (BIT_6 | BIT_5 | BIT_4)) >> 4;
@@ -7286,7 +7286,7 @@ qla24xx_nvram_config(scsi_qla_host_t *vha)
 		ha->zio_mode = le32_to_cpu(icb->firmware_options_2) &
 		    (BIT_3 | BIT_2 | BIT_1 | BIT_0);
 		ha->zio_timer = le16_to_cpu(icb->interrupt_delay_timer) ?
-		    le16_to_cpu(icb->interrupt_delay_timer): 2;
+		    le16_to_cpu(icb->interrupt_delay_timer) : 2;
 	}
 	icb->firmware_options_2 &= cpu_to_le32(
 	    ~(BIT_3 | BIT_2 | BIT_1 | BIT_0));
@@ -8232,7 +8232,7 @@ qla84xx_init_chip(scsi_qla_host_t *vha)
 
 	mutex_unlock(&ha->cs84xx->fw_update_mutex);
 
-	return rval != QLA_SUCCESS || status[0] ? QLA_FUNCTION_FAILED:
+	return rval != QLA_SUCCESS || status[0] ? QLA_FUNCTION_FAILED :
 	    QLA_SUCCESS;
 }
 
@@ -8428,11 +8428,11 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
 	ha->flags.disable_risc_code_load = 0;
 	ha->flags.enable_lip_reset = 0;
 	ha->flags.enable_lip_full_login =
-	    le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0;
+	    le32_to_cpu(nv->host_p) & BIT_10 ? 1 : 0;
 	ha->flags.enable_target_reset =
-	    le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0;
+	    le32_to_cpu(nv->host_p) & BIT_11 ? 1 : 0;
 	ha->flags.enable_led_scheme = 0;
-	ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0;
+	ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1 : 0;
 
 	ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) &
 	    (BIT_6 | BIT_5 | BIT_4)) >> 4;
@@ -8505,7 +8505,7 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
 		ha->zio_mode = le32_to_cpu(icb->firmware_options_2) &
 		    (BIT_3 | BIT_2 | BIT_1 | BIT_0);
 		ha->zio_timer = le16_to_cpu(icb->interrupt_delay_timer) ?
-		    le16_to_cpu(icb->interrupt_delay_timer): 2;
+		    le16_to_cpu(icb->interrupt_delay_timer) : 2;
 	}
 	icb->firmware_options_2 &= cpu_to_le32(
 	    ~(BIT_3 | BIT_2 | BIT_1 | BIT_0));
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index d233be241e57..528dc71cb275 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -2494,7 +2494,7 @@ qla2x00_logout_iocb(srb_t *sp, struct mbx_entry *mbx)
 	SET_TARGET_ID(ha, mbx->loop_id, sp->fcport->loop_id);
 	mbx->mb0 = cpu_to_le16(MBC_LOGOUT_FABRIC_PORT);
 	mbx->mb1 = HAS_EXTENDED_IDS(ha) ?
-	    cpu_to_le16(sp->fcport->loop_id):
+	    cpu_to_le16(sp->fcport->loop_id) :
 	    cpu_to_le16(sp->fcport->loop_id << 8);
 	mbx->mb2 = cpu_to_le16(sp->fcport->d_id.b.domain);
 	mbx->mb3 = cpu_to_le16(sp->fcport->d_id.b.area << 8 |
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 01e51e2a7793..682a26157311 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -2033,7 +2033,7 @@ qla2x00_get_port_database(scsi_qla_host_t *vha, fc_port_t *fcport, uint8_t opt)
 
 		/* Passback COS information. */
 		fcport->supported_classes = (pd->options & BIT_4) ?
-		    FC_COS_CLASS2: FC_COS_CLASS3;
+		    FC_COS_CLASS2 : FC_COS_CLASS3;
 	}
 
 gpd_error_out:
@@ -3277,7 +3277,7 @@ __qla24xx_issue_tmf(char *name, uint32_t type, struct fc_port *fcport,
 
 	/* Issue marker IOCB. */
 	rval2 = qla2x00_marker(vha, ha->base_qpair, fcport->loop_id, l,
-	    type == TCF_LUN_RESET ? MK_SYNC_ID_LUN: MK_SYNC_ID);
+	    type == TCF_LUN_RESET ? MK_SYNC_ID_LUN : MK_SYNC_ID);
 	if (rval2 != QLA_SUCCESS) {
 		ql_dbg(ql_dbg_mbx, vha, 0x1099,
 		    "Failed to issue marker IOCB (%x).\n", rval2);
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 6c523e371dec..466aa35d10cc 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -108,7 +108,7 @@ MODULE_PARM_DESC(ql2xshiftctondsd,
 		"Set to control shifting of command type processing "
 		"based on total number of SG elements.");
 
-int ql2xfdmienable=1;
+int ql2xfdmienable = 1;
 module_param(ql2xfdmienable, int, S_IRUGO|S_IWUSR);
 module_param_named(fdmi, ql2xfdmienable, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(ql2xfdmienable,
@@ -154,7 +154,7 @@ MODULE_PARM_DESC(ql2xenablehba_err_chk,
 		"  1 -- Error isolation enabled only for DIX Type 0\n"
 		"  2 -- Error isolation enabled for all Types\n");
 
-int ql2xiidmaenable=1;
+int ql2xiidmaenable = 1;
 module_param(ql2xiidmaenable, int, S_IRUGO);
 MODULE_PARM_DESC(ql2xiidmaenable,
 		"Enables iIDMA settings "
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 320c25f3a79a..1eb82384d933 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -987,7 +987,7 @@ qla2xxx_get_fdt_info(scsi_qla_host_t *vha)
 		ha->fdt_unprotect_sec_cmd = flash_conf_addr(ha, 0x0300 |
 		    fdt->unprotect_sec_cmd);
 		ha->fdt_protect_sec_cmd = fdt->protect_sec_cmd ?
-		    flash_conf_addr(ha, 0x0300 | fdt->protect_sec_cmd):
+		    flash_conf_addr(ha, 0x0300 | fdt->protect_sec_cmd) :
 		    flash_conf_addr(ha, 0x0336);
 	}
 	goto done;
diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h
index f3de75000a08..37e342f12787 100644
--- a/drivers/scsi/qla2xxx/qla_target.h
+++ b/drivers/scsi/qla2xxx/qla_target.h
@@ -855,7 +855,7 @@ enum trace_flags {
 	TRC_CTIO_ERR = BIT_11,
 	TRC_CTIO_DONE = BIT_12,
 	TRC_CTIO_ABORTED =  BIT_13,
-	TRC_CTIO_STRANGE= BIT_14,
+	TRC_CTIO_STRANGE = BIT_14,
 	TRC_CMD_DONE = BIT_15,
 	TRC_CMD_CHK_STOP = BIT_16,
 	TRC_CMD_FREE = BIT_17,