summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorVladimir Oltean <vladimir.oltean@nxp.com>2021-02-04 15:45:11 +0200
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2021-02-17 10:35:17 +0100
commit6107338c2fa2ee6264fc26e50462061377e4d4f3 (patch)
treef1741f4fbeb183fca81c04d2927d9a55e0562b40
parent71d2bd7921db2e87cfea2dac51e14b185a28ac2d (diff)
net: enetc: initialize the RFS and RSS memories
[ Upstream commit 07bf34a50e327975b21a9dee64d220c3dcb72ee9 ] Michael tried to enable Advanced Error Reporting through the ENETC's Root Complex Event Collector, and the system started spitting out single bit correctable ECC errors coming from the ENETC interfaces: pcieport 0000:00:1f.0: AER: Multiple Corrected error received: 0000:00:00.0 fsl_enetc 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Transaction Layer, (Receiver ID) fsl_enetc 0000:00:00.0: device [1957:e100] error status/mask=00004000/00000000 fsl_enetc 0000:00:00.0: [14] CorrIntErr fsl_enetc 0000:00:00.1: PCIe Bus Error: severity=Corrected, type=Transaction Layer, (Receiver ID) fsl_enetc 0000:00:00.1: device [1957:e100] error status/mask=00004000/00000000 fsl_enetc 0000:00:00.1: [14] CorrIntErr Further investigating the port correctable memory error detect register (PCMEDR) shows that these AER errors have an associated SOURCE_ID of 6 (RFS/RSS): $ devmem 0x1f8010e10 32 0xC0000006 $ devmem 0x1f8050e10 32 0xC0000006 Discussion with the hardware design engineers reveals that on LS1028A, the hardware does not do initialization of that RFS/RSS memory, and that software should clear/initialize the entire table before starting to operate. That comes as a bit of a surprise, since the driver does not do initialization of the RFS memory. Also, the initialization of the Receive Side Scaling is done only partially. Even though the entire ENETC IP has a single shared flow steering memory, the flow steering service should returns matches only for TCAM entries that are within the range of the Station Interface that is doing the search. Therefore, it should be sufficient for a Station Interface to initialize all of its own entries in order to avoid any ECC errors, and only the Station Interfaces in use should need initialization. There are Physical Station Interfaces associated with PCIe PFs and Virtual Station Interfaces associated with PCIe VFs. We let the PF driver initialize the entire port's memory, which includes the RFS entries which are going to be used by the VF. Reported-by: Michael Walle <michael@walle.cc> Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20210204134511.2640309-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-rw-r--r--drivers/net/ethernet/freescale/enetc/enetc_hw.h2
-rw-r--r--drivers/net/ethernet/freescale/enetc/enetc_pf.c59
2 files changed, 61 insertions, 0 deletions
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_hw.h b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
index 7428f62408a2..fac80831d532 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h
+++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
@@ -181,6 +181,8 @@ enum enetc_bdr_type {TX, RX};
#define ENETC_PTCCBSR0(n) (0x1110 + (n) * 8) /* n = 0 to 7*/
#define ENETC_PTCCBSR1(n) (0x1114 + (n) * 8) /* n = 0 to 7*/
#define ENETC_RSSHASH_KEY_SIZE 40
+#define ENETC_PRSSCAPR 0x1404
+#define ENETC_PRSSCAPR_GET_NUM_RSS(val) (BIT((val) & 0xf) * 32)
#define ENETC_PRSSK(n) (0x1410 + (n) * 4) /* n = [0..9] */
#define ENETC_PSIVLANFMR 0x1700
#define ENETC_PSIVLANFMR_VS BIT(0)
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
index 74847aa644f1..22f70638a405 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
@@ -809,6 +809,51 @@ static void enetc_of_put_phy(struct enetc_ndev_priv *priv)
of_node_put(priv->phy_node);
}
+/* Initialize the entire shared memory for the flow steering entries
+ * of this port (PF + VFs)
+ */
+static int enetc_init_port_rfs_memory(struct enetc_si *si)
+{
+ struct enetc_cmd_rfse rfse = {0};
+ struct enetc_hw *hw = &si->hw;
+ int num_rfs, i, err = 0;
+ u32 val;
+
+ val = enetc_port_rd(hw, ENETC_PRFSCAPR);
+ num_rfs = ENETC_PRFSCAPR_GET_NUM_RFS(val);
+
+ for (i = 0; i < num_rfs; i++) {
+ err = enetc_set_fs_entry(si, &rfse, i);
+ if (err)
+ break;
+ }
+
+ return err;
+}
+
+static int enetc_init_port_rss_memory(struct enetc_si *si)
+{
+ struct enetc_hw *hw = &si->hw;
+ int num_rss, err;
+ int *rss_table;
+ u32 val;
+
+ val = enetc_port_rd(hw, ENETC_PRSSCAPR);
+ num_rss = ENETC_PRSSCAPR_GET_NUM_RSS(val);
+ if (!num_rss)
+ return 0;
+
+ rss_table = kcalloc(num_rss, sizeof(*rss_table), GFP_KERNEL);
+ if (!rss_table)
+ return -ENOMEM;
+
+ err = enetc_set_rss_table(si, rss_table, num_rss);
+
+ kfree(rss_table);
+
+ return err;
+}
+
static int enetc_pf_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -863,6 +908,18 @@ static int enetc_pf_probe(struct pci_dev *pdev,
goto err_alloc_si_res;
}
+ err = enetc_init_port_rfs_memory(si);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to initialize RFS memory\n");
+ goto err_init_port_rfs;
+ }
+
+ err = enetc_init_port_rss_memory(si);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to initialize RSS memory\n");
+ goto err_init_port_rss;
+ }
+
err = enetc_alloc_msix(priv);
if (err) {
dev_err(&pdev->dev, "MSIX alloc failed\n");
@@ -888,6 +945,8 @@ err_reg_netdev:
enetc_mdio_remove(pf);
enetc_of_put_phy(priv);
enetc_free_msix(priv);
+err_init_port_rss:
+err_init_port_rfs:
err_alloc_msix:
enetc_free_si_resources(priv);
err_alloc_si_res: