summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-11-14 12:31:43 +0900
committerLinus Torvalds <torvalds@linux-foundation.org>2013-11-14 12:31:43 +0900
commit82cb6acea4d10fa4080612c58deb63993f558e5a (patch)
treeba6f0b8281e37c7e1830ef2162d38d8a2bc2fbb7
parent0d522ee7499e4abe7189b2f1728e838959b8ddde (diff)
parent885d71e5838f68d5dbee92ab952cc90ad6c1dc6b (diff)
Merge tag 'for-linus-20131112' of git://git.infradead.org/linux-mtd
Pull MTD changes from Brian Norris: - Unify some compile-time differences so that we have fewer uses of #ifdef CONFIG_OF in atmel_nand - Other general cleanups (removing unused functions, options, variables, fields; use correct interfaces) - Fix BUG() for new odd-sized NAND, which report non-power-of-2 dimensions via ONFI - Miscellaneous driver fixes (SPI NOR flash; BCM47xx NAND flash; etc.) - Improve differentiation between SLC and MLC NAND -- this clarifies an ABI issue regarding the MTD "type" (in sysfs and in the MEMGETINFO ioctl), where the MTD_MLCNANDFLASH type was present but inconsistently used - Extend GPMI NAND to support multi-chip-select NAND for some platforms - Many improvements to the OMAP2/3 NAND driver, including an expanded DT binding to bring us closer to mainline support for some OMAP systems - Fix a deadlock in the error path of the Atmel NAND driver probe - Correct the error codes from MTD mmap() to conform to POSIX and the Linux Programmer's Manual. This is an acknowledged change in the MTD ABI, but I can't imagine somebody relying on the non-standard -ENOSYS error code specifically. Am I just being unimaginative? :) - Fix a few important GPMI NAND bugs (one regression from 3.12 and one long-standing race condition) - More? Read the log! * tag 'for-linus-20131112' of git://git.infradead.org/linux-mtd: (98 commits) mtd: gpmi: fix the NULL pointer mtd: gpmi: fix kernel BUG due to racing DMA operations mtd: mtdchar: return expected errors on mmap() call mtd: gpmi: only scan two chips for imx6 mtd: gpmi: Use devm_kzalloc() mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected mtd: nand: use a local variable to simplify the nand_scan_tail mtd: nand: remove deprecated IRQF_DISABLED mtd: dataflash: Say if we find a device we don't support mtd: nand: omap: fix error return code in omap_nand_probe() mtd: nand_bbt: kill NAND_BBT_SCANALLPAGES mtd: m25p80: fixup device removal failure path mtd: mxc_nand: Include linux/of.h header mtd: remove duplicated include from mtdcore.c mtd: m25p80: add support for Macronix mx25l3255e mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig mtd: nand: omap: updated devm_xx for all resource allocation and free calls mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c mtd: nand: omap: clean-up ecc layout for BCH ecc schemes mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe ...
-rw-r--r--Documentation/ABI/testing/sysfs-class-mtd2
-rw-r--r--Documentation/DocBook/mtdnand.tmpl2
-rw-r--r--Documentation/devicetree/bindings/mtd/gpmc-nand.txt16
-rw-r--r--arch/arm/mach-omap2/board-flash.c2
-rw-r--r--arch/arm/mach-omap2/gpmc.c48
-rw-r--r--arch/powerpc/include/asm/fsl_ifc.h2
-rw-r--r--drivers/mtd/bcm47xxpart.c23
-rw-r--r--drivers/mtd/devices/Kconfig7
-rw-r--r--drivers/mtd/devices/block2mtd.c1
-rw-r--r--drivers/mtd/devices/docg3.c2
-rw-r--r--drivers/mtd/devices/m25p80.c82
-rw-r--r--drivers/mtd/devices/mtd_dataflash.c4
-rw-r--r--drivers/mtd/devices/phram.c66
-rw-r--r--drivers/mtd/devices/sst25l.c13
-rw-r--r--drivers/mtd/inftlcore.c2
-rw-r--r--drivers/mtd/lpddr/lpddr_cmds.c2
-rw-r--r--drivers/mtd/maps/intel_vr_nor.c1
-rw-r--r--drivers/mtd/maps/pci.c1
-rw-r--r--drivers/mtd/maps/plat-ram.c18
-rw-r--r--drivers/mtd/maps/scb2_flash.c1
-rw-r--r--drivers/mtd/mtdblock.c3
-rw-r--r--drivers/mtd/mtdblock_ro.c3
-rw-r--r--drivers/mtd/mtdchar.c7
-rw-r--r--drivers/mtd/mtdcore.c3
-rw-r--r--drivers/mtd/mtdsuper.c1
-rw-r--r--drivers/mtd/nand/Kconfig40
-rw-r--r--drivers/mtd/nand/atmel_nand.c67
-rw-r--r--drivers/mtd/nand/bcm47xxnflash/main.c38
-rw-r--r--drivers/mtd/nand/denali.c4
-rw-r--r--drivers/mtd/nand/denali_pci.c1
-rw-r--r--drivers/mtd/nand/diskonchip.c2
-rw-r--r--drivers/mtd/nand/docg4.c16
-rw-r--r--drivers/mtd/nand/fsl_elbc_nand.c2
-rw-r--r--drivers/mtd/nand/fsl_ifc_nand.c134
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-lib.c13
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.c66
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-regs.h3
-rw-r--r--drivers/mtd/nand/lpc32xx_mlc.c2
-rw-r--r--drivers/mtd/nand/lpc32xx_slc.c10
-rw-r--r--drivers/mtd/nand/mxc_nand.c3
-rw-r--r--drivers/mtd/nand/nand_base.c305
-rw-r--r--drivers/mtd/nand/nand_bbt.c38
-rw-r--r--drivers/mtd/nand/nandsim.c2
-rw-r--r--drivers/mtd/nand/omap2.c642
-rw-r--r--drivers/mtd/nand/pxa3xx_nand.c56
-rw-r--r--drivers/mtd/nand/socrates_nand.c14
-rw-r--r--drivers/mtd/nand/tmio_nand.c3
-rw-r--r--drivers/mtd/nftlcore.c2
-rw-r--r--drivers/mtd/onenand/omap2.c22
-rw-r--r--drivers/mtd/onenand/onenand_base.c17
-rw-r--r--drivers/mtd/ssfdc.c2
-rw-r--r--drivers/mtd/tests/nandbiterrs.c2
-rw-r--r--drivers/mtd/tests/oobtest.c2
-rw-r--r--drivers/mtd/tests/pagetest.c2
-rw-r--r--drivers/mtd/tests/subpagetest.c2
-rw-r--r--drivers/mtd/ubi/build.c1
-rw-r--r--fs/jffs2/fs.c4
-rw-r--r--include/linux/mtd/bbm.h2
-rw-r--r--include/linux/mtd/map.h4
-rw-r--r--include/linux/mtd/mtd.h8
-rw-r--r--include/linux/mtd/nand.h16
-rw-r--r--include/linux/of_mtd.h21
-rw-r--r--include/linux/platform_data/mtd-nand-omap2.h18
-rw-r--r--include/uapi/linux/major.h2
-rw-r--r--include/uapi/mtd/mtd-abi.h9
65 files changed, 925 insertions, 984 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd
index bfd119ace6ad..1399bb2da3eb 100644
--- a/Documentation/ABI/testing/sysfs-class-mtd
+++ b/Documentation/ABI/testing/sysfs-class-mtd
@@ -104,7 +104,7 @@ Description:
One of the following ASCII strings, representing the device
type:
- absent, ram, rom, nor, nand, dataflash, ubi, unknown
+ absent, ram, rom, nor, nand, mlc-nand, dataflash, ubi, unknown
What: /sys/class/mtd/mtdX/writesize
Date: April 2009
diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index a248f42a121e..cd11926e07c7 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -1222,8 +1222,6 @@ in this page</entry>
#define NAND_BBT_VERSION 0x00000100
/* Create a bbt if none axists */
#define NAND_BBT_CREATE 0x00000200
-/* Search good / bad pattern through all pages of a block */
-#define NAND_BBT_SCANALLPAGES 0x00000400
/* Write bbt if neccecary */
#define NAND_BBT_WRITE 0x00001000
/* Read and write back block contents when writing bbt */
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index df338cb5059c..5e1f31b5ff70 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -22,10 +22,10 @@ Optional properties:
width of 8 is assumed.
- ti,nand-ecc-opt: A string setting the ECC layout to use. One of:
-
- "sw" Software method (default)
- "hw" Hardware method
- "hw-romcode" gpmc hamming mode method & romcode layout
+ "sw" <deprecated> use "ham1" instead
+ "hw" <deprecated> use "ham1" instead
+ "hw-romcode" <deprecated> use "ham1" instead
+ "ham1" 1-bit Hamming ecc code
"bch4" 4-bit BCH ecc code
"bch8" 8-bit BCH ecc code
@@ -36,8 +36,12 @@ Optional properties:
"prefetch-dma" Prefetch enabled sDMA mode
"prefetch-irq" Prefetch enabled irq mode
- - elm_id: Specifies elm device node. This is required to support BCH
- error correction using ELM module.
+ - elm_id: <deprecated> use "ti,elm-id" instead
+ - ti,elm-id: Specifies phandle of the ELM devicetree node.
+ ELM is an on-chip hardware engine on TI SoC which is used for
+ locating ECC errors for BCHx algorithms. SoC devices which have
+ ELM hardware engines should specify this device node in .dtsi
+ Using ELM for ECC error correction frees some CPU cycles.
For inline partiton table parsing (optional):
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index fc20a61f6b2a..ac82512b9c8c 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
board_nand_data.nr_parts = nr_parts;
board_nand_data.devsize = nand_type;
- board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
+ board_nand_data.ecc_opt = OMAP_ECC_BCH8_CODE_HW;
gpmc_nand_init(&board_nand_data, gpmc_t);
}
#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 51525faa0aec..81de56251955 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1341,14 +1341,6 @@ static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
#ifdef CONFIG_MTD_NAND
-static const char * const nand_ecc_opts[] = {
- [OMAP_ECC_HAMMING_CODE_DEFAULT] = "sw",
- [OMAP_ECC_HAMMING_CODE_HW] = "hw",
- [OMAP_ECC_HAMMING_CODE_HW_ROMCODE] = "hw-romcode",
- [OMAP_ECC_BCH4_CODE_HW] = "bch4",
- [OMAP_ECC_BCH8_CODE_HW] = "bch8",
-};
-
static const char * const nand_xfer_types[] = {
[NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled",
[NAND_OMAP_POLLED] = "polled",
@@ -1378,13 +1370,41 @@ static int gpmc_probe_nand_child(struct platform_device *pdev,
gpmc_nand_data->cs = val;
gpmc_nand_data->of_node = child;
- if (!of_property_read_string(child, "ti,nand-ecc-opt", &s))
- for (val = 0; val < ARRAY_SIZE(nand_ecc_opts); val++)
- if (!strcasecmp(s, nand_ecc_opts[val])) {
- gpmc_nand_data->ecc_opt = val;
- break;
- }
+ /* Detect availability of ELM module */
+ gpmc_nand_data->elm_of_node = of_parse_phandle(child, "ti,elm-id", 0);
+ if (gpmc_nand_data->elm_of_node == NULL)
+ gpmc_nand_data->elm_of_node =
+ of_parse_phandle(child, "elm_id", 0);
+ if (gpmc_nand_data->elm_of_node == NULL)
+ pr_warn("%s: ti,elm-id property not found\n", __func__);
+
+ /* select ecc-scheme for NAND */
+ if (of_property_read_string(child, "ti,nand-ecc-opt", &s)) {
+ pr_err("%s: ti,nand-ecc-opt not found\n", __func__);
+ return -ENODEV;
+ }
+ if (!strcmp(s, "ham1") || !strcmp(s, "sw") ||
+ !strcmp(s, "hw") || !strcmp(s, "hw-romcode"))
+ gpmc_nand_data->ecc_opt =
+ OMAP_ECC_HAM1_CODE_HW;
+ else if (!strcmp(s, "bch4"))
+ if (gpmc_nand_data->elm_of_node)
+ gpmc_nand_data->ecc_opt =
+ OMAP_ECC_BCH4_CODE_HW;
+ else
+ gpmc_nand_data->ecc_opt =
+ OMAP_ECC_BCH4_CODE_HW_DETECTION_SW;
+ else if (!strcmp(s, "bch8"))
+ if (gpmc_nand_data->elm_of_node)
+ gpmc_nand_data->ecc_opt =
+ OMAP_ECC_BCH8_CODE_HW;
+ else
+ gpmc_nand_data->ecc_opt =
+ OMAP_ECC_BCH8_CODE_HW_DETECTION_SW;
+ else
+ pr_err("%s: ti,nand-ecc-opt invalid value\n", __func__);
+ /* select data transfer mode for NAND controller */
if (!of_property_read_string(child, "ti,nand-xfer-type", &s))
for (val = 0; val < ARRAY_SIZE(nand_xfer_types); val++)
if (!strcasecmp(s, nand_xfer_types[val])) {
diff --git a/arch/powerpc/include/asm/fsl_ifc.h b/arch/powerpc/include/asm/fsl_ifc.h
index b8a4b9bc50b3..f49ddb1b2273 100644
--- a/arch/powerpc/include/asm/fsl_ifc.h
+++ b/arch/powerpc/include/asm/fsl_ifc.h
@@ -93,6 +93,7 @@
#define CSOR_NAND_PGS_512 0x00000000
#define CSOR_NAND_PGS_2K 0x00080000
#define CSOR_NAND_PGS_4K 0x00100000
+#define CSOR_NAND_PGS_8K 0x00180000
/* Spare region Size */
#define CSOR_NAND_SPRZ_MASK 0x0000E000
#define CSOR_NAND_SPRZ_SHIFT 13
@@ -102,6 +103,7 @@
#define CSOR_NAND_SPRZ_210 0x00006000
#define CSOR_NAND_SPRZ_218 0x00008000
#define CSOR_NAND_SPRZ_224 0x0000A000
+#define CSOR_NAND_SPRZ_CSOR_EXT 0x0000C000
/* Pages Per Block */
#define CSOR_NAND_PB_MASK 0x00000700
#define CSOR_NAND_PB_SHIFT 8
diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c
index 9279a9174f84..7a6384b0962a 100644
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -27,11 +27,13 @@
/* Magics */
#define BOARD_DATA_MAGIC 0x5246504D /* MPFR */
+#define FACTORY_MAGIC 0x59544346 /* FCTY */
#define POT_MAGIC1 0x54544f50 /* POTT */
#define POT_MAGIC2 0x504f /* OP */
#define ML_MAGIC1 0x39685a42
#define ML_MAGIC2 0x26594131
#define TRX_MAGIC 0x30524448
+#define SQSH_MAGIC 0x71736873 /* shsq */
struct trx_header {
uint32_t magic;
@@ -71,7 +73,14 @@ static int bcm47xxpart_parse(struct mtd_info *master,
/* Alloc */
parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS,
GFP_KERNEL);
+ if (!parts)
+ return -ENOMEM;
+
buf = kzalloc(BCM47XXPART_BYTES_TO_READ, GFP_KERNEL);
+ if (!buf) {
+ kfree(parts);
+ return -ENOMEM;
+ }
/* Parse block by block looking for magics */
for (offset = 0; offset <= master->size - blocksize;
@@ -110,6 +119,13 @@ static int bcm47xxpart_parse(struct mtd_info *master,
continue;
}
+ /* Found on Huawei E970 */
+ if (buf[0x000 / 4] == FACTORY_MAGIC) {
+ bcm47xxpart_add_part(&parts[curr_part++], "factory",
+ offset, MTD_WRITEABLE);
+ continue;
+ }
+
/* POT(TOP) */
if (buf[0x000 / 4] == POT_MAGIC1 &&
(buf[0x004 / 4] & 0xFFFF) == POT_MAGIC2) {
@@ -167,6 +183,13 @@ static int bcm47xxpart_parse(struct mtd_info *master,
offset = rounddown(offset + trx->length, blocksize);
continue;
}
+
+ /* Squashfs on devices not using TRX */
+ if (buf[0x000 / 4] == SQSH_MAGIC) {
+ bcm47xxpart_add_part(&parts[curr_part++], "rootfs",
+ offset, 0);
+ continue;
+ }
}
/* Look for NVRAM at the end of the last block. */
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 74ab4b7e523e..01281382180b 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -95,13 +95,6 @@ config MTD_M25P80
if you want to specify device partitioning or to use a device which
doesn't support the JEDEC ID instruction.
-config M25PXX_USE_FAST_READ
- bool "Use FAST_READ OPCode allowing SPI CLK >= 50MHz"
- depends on MTD_M25P80
- default y
- help
- This option enables FAST_READ access supported by ST M25Pxx.
-
config MTD_SPEAR_SMI
tristate "SPEAR MTD NOR Support through SMI controller"
depends on PLAT_SPEAR
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index 5cb4c04726b2..d9fd87a4c8dc 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -20,6 +20,7 @@
#include <linux/mutex.h>
#include <linux/mount.h>
#include <linux/slab.h>
+#include <linux/major.h>
/* Info for the block device */
struct block2mtd_dev {
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index 3e1b0a0ef4db..4f091c1a9981 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -2097,7 +2097,7 @@ notfound:
ret = -ENODEV;
dev_info(dev, "No supported DiskOnChip found\n");
err_probe:
- kfree(cascade->bch);
+ free_bch(cascade->bch);
for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++)
if (cascade->floors[floor])
doc_release_device(cascade->floors[floor]);
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 6bc9618af094..7eda71dbc183 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -78,7 +78,7 @@
/* Define max times to check status register before we give up. */
#define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */
-#define MAX_CMD_SIZE 5
+#define MAX_CMD_SIZE 6
#define JEDEC_MFR(_jedec_id) ((_jedec_id) >> 16)
@@ -367,10 +367,6 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
spi_message_init(&m);
memset(t, 0, (sizeof t));
- /* NOTE:
- * OPCODE_FAST_READ (if available) is faster.
- * Should add 1 byte DUMMY_BYTE.
- */
t[0].tx_buf = flash->command;
t[0].len = m25p_cmdsz(flash) + (flash->fast_read ? 1 : 0);
spi_message_add_tail(&t[0], &m);
@@ -388,11 +384,6 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
return 1;
}
- /* FIXME switch to OPCODE_FAST_READ. It's required for higher
- * clocks; and at this writing, every chip this driver handles
- * supports that opcode.
- */
-
/* Set up the write data buffer. */
opcode = flash->read_opcode;
flash->command[0] = opcode;
@@ -749,16 +740,19 @@ static const struct spi_device_id m25p_ids[] = {
{ "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) },
/* EON -- en25xxx */
- { "en25f32", INFO(0x1c3116, 0, 64 * 1024, 64, SECT_4K) },
- { "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64, 0) },
- { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) },
- { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
- { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) },
- { "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) },
+ { "en25f32", INFO(0x1c3116, 0, 64 * 1024, 64, SECT_4K) },
+ { "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64, 0) },
+ { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) },
+ { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
+ { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) },
+ { "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) },
+
+ /* ESMT */
+ { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K) },
/* Everspin */
- { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, M25P_NO_ERASE | M25P_NO_FR) },
- { "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3, M25P_NO_ERASE | M25P_NO_FR) },
+ { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, M25P_NO_ERASE | M25P_NO_FR) },
+ { "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3, M25P_NO_ERASE | M25P_NO_FR) },
/* GigaDevice */
{ "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) },
@@ -775,6 +769,7 @@ static const struct spi_device_id m25p_ids[] = {
{ "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) },
{ "mx25l1606e", INFO(0xc22015, 0, 64 * 1024, 32, SECT_4K) },
{ "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, 0) },
+ { "mx25l3255e", INFO(0xc29e16, 0, 64 * 1024, 64, SECT_4K) },
{ "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, 0) },
{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
@@ -783,15 +778,16 @@ static const struct spi_device_id m25p_ids[] = {
{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, 0) },
/* Micron */
- { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, 0) },
- { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, 0) },
- { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) },
- { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) },
+ { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, 0) },
+ { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, 0) },
+ { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) },
+ { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) },
+ { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K) },
/* PMC */
- { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
- { "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) },
- { "pm25lq032", INFO(0x7f9d46, 0, 64 * 1024, 64, SECT_4K) },
+ { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
+ { "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) },
+ { "pm25lq032", INFO(0x7f9d46, 0, 64 * 1024, 64, SECT_4K) },
/* Spansion -- single (large) sector size only, at least
* for the chips listed here (without boot sectors).
@@ -940,12 +936,7 @@ static int m25p_probe(struct spi_device *spi)
struct flash_info *info;
unsigned i;
struct mtd_part_parser_data ppdata;
- struct device_node __maybe_unused *np = spi->dev.of_node;
-
-#ifdef CONFIG_MTD_OF_PARTS
- if (!of_device_is_available(np))
- return -ENODEV;
-#endif
+ struct device_node *np = spi->dev.of_node;
/* Platform data helps sort out which chip type we have, as
* well as how this board partitions it. If we don't have
@@ -992,15 +983,13 @@ static int m25p_probe(struct spi_device *spi)
}
}
- flash = kzalloc(sizeof *flash, GFP_KERNEL);
+ flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL);
if (!flash)
return -ENOMEM;
- flash->command = kmalloc(MAX_CMD_SIZE + (flash->fast_read ? 1 : 0),
- GFP_KERNEL);
- if (!flash->command) {
- kfree(flash);
+
+ flash->command = devm_kzalloc(&spi->dev, MAX_CMD_SIZE, GFP_KERNEL);
+ if (!flash->command)
return -ENOMEM;
- }
flash->spi = spi;
mutex_init(&flash->lock);
@@ -1062,13 +1051,14 @@ static int m25p_probe(struct spi_device *spi)
flash->page_size = info->page_size;
flash->mtd.writebufsize = flash->page_size;
- flash->fast_read = false;
- if (np && of_property_read_bool(np, "m25p,fast-read"))
+ if (np)
+ /* If we were instantiated by DT, use it */
+ flash->fast_read = of_property_read_bool(np, "m25p,fast-read");
+ else
+ /* If we weren't instantiated by DT, default to fast-read */
flash->fast_read = true;
-#ifdef CONFIG_M25PXX_USE_FAST_READ
- flash->fast_read = true;
-#endif
+ /* Some devices cannot do fast-read, no matter what DT tells us */
if (info->flags & M25P_NO_FR)
flash->fast_read = false;
@@ -1133,15 +1123,9 @@ static int m25p_probe(struct spi_device *spi)
static int m25p_remove(struct spi_device *spi)
{
struct m25p *flash = spi_get_drvdata(spi);
- int status;
/* Clean up MTD stuff. */
- status = mtd_device_unregister(&flash->mtd);
- if (status == 0) {
- kfree(flash->command);
- kfree(flash);
- }
- return 0;
+ return mtd_device_unregister(&flash->mtd);
}
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 0e8cbfeba11e..4a47b0266d4e 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -88,8 +88,6 @@ struct dataflash {
uint8_t command[4];
char name[24];
- unsigned partitioned:1;
-
unsigned short page_offset; /* offset in flash address */
unsigned int page_size; /* of bytes per page */
@@ -881,7 +879,7 @@ static int dataflash_probe(struct spi_device *spi)
break;
/* obsolete AT45DB1282 not (yet?) supported */
default:
- pr_debug("%s: unsupported device (%x)\n", dev_name(&spi->dev),
+ dev_info(&spi->dev, "unsupported device (%x)\n",
status & 0x3c);
status = -ENODEV;
}
diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
index 67823de68db6..e1f2aebaa489 100644
--- a/drivers/mtd/devices/phram.c
+++ b/drivers/mtd/devices/phram.c
@@ -94,7 +94,7 @@ static void unregister_devices(void)
}
}
-static int register_device(char *name, unsigned long start, unsigned long len)
+static int register_device(char *name, phys_addr_t start, size_t len)
{
struct phram_mtd_list *new;
int ret = -ENOMEM;
@@ -141,35 +141,35 @@ out0:
return ret;
}
-static int ustrtoul(const char *cp, char **endp, unsigned int base)
+static int parse_num64(uint64_t *num64, char *token)
{
- unsigned long result = simple_strtoul(cp, endp, base);
-
- switch (**endp) {
- case 'G':
- result *= 1024;
- case 'M':
- result *= 1024;
- case 'k':
- result *= 1024;
+ size_t len;
+ int shift = 0;
+ int ret;
+
+ len = strlen(token);
/* By dwmw2 editorial decree, "ki", "Mi" or "Gi" are to be used. */
- if ((*endp)[1] == 'i')
- (*endp) += 2;
+ if (len > 2) {
+ if (token[len - 1] == 'i') {
+ switch (token[len - 2]) {
+ case 'G':
+ shift += 10;
+ case 'M':
+ shift += 10;
+ case 'k':
+ shift += 10;
+ token[len - 2] = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
}
- return result;
-}
-static int parse_num32(uint32_t *num32, const char *token)
-{
- char *endp;
- unsigned long n;
+ ret = kstrtou64(token, 0, num64);
+ *num64 <<= shift;
- n = ustrtoul(token, &endp, 0);
- if (*endp)
- return -EINVAL;
-
- *num32 = n;
- return 0;
+ return ret;
}
static int parse_name(char **pname, const char *token)
@@ -209,19 +209,19 @@ static inline void kill_final_newline(char *str)
* This shall contain the module parameter if any. It is of the form:
* - phram=<device>,<address>,<size> for module case
* - phram.phram=<device>,<address>,<size> for built-in case
- * We leave 64 bytes for the device name, 12 for the address and 12 for the
+ * We leave 64 bytes for the device name, 20 for the address and 20 for the
* size.
* Example: phram.phram=rootfs,0xa0000000,512Mi
*/
-static __initdata char phram_paramline[64+12+12];
+static __initdata char phram_paramline[64 + 20 + 20];
static int __init phram_setup(const char *val)
{
- char buf[64+12+12], *str = buf;
+ char buf[64 + 20 + 20], *str = buf;
char *token[3];
char *name;
- uint32_t start;
- uint32_t len;
+ uint64_t start;
+ uint64_t len;
int i, ret;
if (strnlen(val, sizeof(buf)) >= sizeof(buf))
@@ -243,13 +243,13 @@ static int __init phram_setup(const char *val)
if (ret)
return ret;
- ret = parse_num32(&start, token[1]);
+ ret = parse_num64(&start, token[1]);
if (ret) {
kfree(name);
parse_err("illegal start address\n");
}
- ret = parse_num32(&len, token[2]);
+ ret = parse_num64(&len, token[2]);
if (ret) {
kfree(name);
parse_err("illegal device length\n");
@@ -257,7 +257,7 @@ static int __init phram_setup(const char *val)
ret = register_device(name, start, len);
if (!ret)
- pr_info("%s device: %#x at %#x\n", name, len, start);
+ pr_info("%s device: %#llx at %#llx\n", name, len, start);
else
kfree(name);
diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c
index a42f1f0e7281..687bf27ec850 100644
--- a/drivers/mtd/devices/sst25l.c
+++ b/drivers/mtd/devices/sst25l.c
@@ -364,7 +364,7 @@ static int sst25l_probe(struct spi_device *spi)
if (!flash_info)
return -ENODEV;
- flash = kzalloc(sizeof(struct sst25l_flash), GFP_KERNEL);
+ flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL);
if (!flash)
return -ENOMEM;
@@ -402,11 +402,8 @@ static int sst25l_probe(struct spi_device *spi)
ret = mtd_device_parse_register(&flash->mtd, NULL, NULL,
data ? data->parts : NULL,
data ? data->nr_parts : 0);
- if (ret) {
- kfree(flash);
- spi_set_drvdata(spi, NULL);
+ if (ret)
return -ENODEV;
- }
return 0;
}
@@ -414,12 +411,8 @@ static int sst25l_probe(struct spi_device *spi)
static int sst25l_remove(struct spi_device *spi)
{
struct sst25l_flash *flash = spi_get_drvdata(spi);
- int ret;
- ret = mtd_device_unregister(&flash->mtd);
- if (ret == 0)
- kfree(flash);
- return ret;
+ return mtd_device_unregister(&flash->mtd);
}
static struct spi_driver sst25l_driver = {
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
index 3af351484098..b66b541877f0 100644
--- a/drivers/mtd/inftlcore.c
+++ b/drivers/mtd/inftlcore.c
@@ -50,7 +50,7 @@ static void inftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
struct INFTLrecord *inftl;
unsigned long temp;
- if (mtd->type != MTD_NANDFLASH || mtd->size > UINT_MAX)
+ if (!mtd_type_is_nand(mtd) || mtd->size > UINT_MAX)
return;
/* OK, this is moderately ugly. But probably safe. Alternatives? */
if (memcmp(mtd->name, "DiskOnChip", 10))
diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c
index d3cfe26beeaa..2ef19aa0086b 100644
--- a/drivers/mtd/lpddr/lpddr_cmds.c
+++ b/drivers/mtd/lpddr/lpddr_cmds.c
@@ -703,7 +703,7 @@ static int lpddr_erase(struct mtd_info *mtd, struct erase_info *instr)
#define DO_XXLOCK_LOCK 1
#define DO_XXLOCK_UNLOCK 2
-int do_xxlock(struct mtd_info *mtd, loff_t adr, uint32_t len, int thunk)
+static int do_xxlock(struct mtd_info *mtd, loff_t adr, uint32_t len, int thunk)
{
int ret = 0;
struct map_info *map = mtd->priv;
diff --git a/drivers/mtd/maps/intel_vr_nor.c b/drivers/mtd/maps/intel_vr_nor.c
index f581ac1cf022..46d195fca942 100644
--- a/drivers/mtd/maps/intel_vr_nor.c
+++ b/drivers/mtd/maps/intel_vr_nor.c
@@ -180,7 +180,6 @@ static void vr_nor_pci_remove(struct pci_dev *dev)
{
struct vr_nor_mtd *p = pci_get_drvdata(dev);
- pci_set_drvdata(dev, NULL);
vr_nor_destroy_partitions(p);
vr_nor_destroy_mtd_setup(p);
vr_nor_destroy_maps(p);
diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c
index c2604f8b2a5e..36da518915b5 100644
--- a/drivers/mtd/maps/pci.c
+++ b/drivers/mtd/maps/pci.c
@@ -316,7 +316,6 @@ static void mtd_pci_remove(struct pci_dev *dev)
map->exit(dev, map);
kfree(map);
- pci_set_drvdata(dev, NULL);
pci_release_regions(dev);
}
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index 676271659b37..10196f5a897d 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -55,7 +55,7 @@ struct platram_info {
static inline struct platram_info *to_platram_info(struct platform_device *dev)
{
- return (struct platram_info *)platform_get_drvdata(dev);
+ return platform_get_drvdata(dev);
}
/* platram_setrw
@@ -257,21 +257,7 @@ static struct platform_driver platram_driver = {
},
};
-/* module init/exit */
-
-static int __init platram_init(void)
-{
- printk("Generic platform RAM MTD, (c) 2004 Simtec Electronics\n");
- return platform_driver_register(&platram_driver);
-}
-
-static void __exit platram_exit(void)
-{
- platform_driver_unregister(&platram_driver);
-}
-
-module_init(platram_init);
-module_exit(platram_exit);
+module_platform_driver(platram_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
diff --git a/drivers/mtd/maps/scb2_flash.c b/drivers/mtd/maps/scb2_flash.c
index c77b68c9412f..3051c4c36240 100644
--- a/drivers/mtd/maps/scb2_flash.c
+++ b/drivers/mtd/maps/scb2_flash.c
@@ -212,7 +212,6 @@ static void scb2_flash_remove(struct pci_dev *dev)
if (!region_fail)
release_mem_region(SCB2_ADDR, SCB2_WINDOW);
- pci_set_drvdata(dev, NULL);
}
static struct pci_device_id scb2_flash_pci_ids[] = {
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index 2aef5dda522b..485ea751c7f9 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -32,6 +32,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/blktrans.h>
#include <linux/mutex.h>
+#include <linux/major.h>
struct mtdblk_dev {
@@ -373,7 +374,7 @@ static void mtdblock_remove_dev(struct mtd_blktrans_dev *dev)
static struct mtd_blktrans_ops mtdblock_tr = {
.name = "mtdblock",
- .major = 31,
+ .major = MTD_BLOCK_MAJOR,
.part_bits = 0,
.blksize = 512,
.open = mtdblock_open,
diff --git a/drivers/mtd/mtdblock_ro.c b/drivers/mtd/mtdblock_ro.c
index 92759a9d2985..fb5dc89369de 100644
--- a/drivers/mtd/mtdblock_ro.c
+++ b/drivers/mtd/mtdblock_ro.c
@@ -24,6 +24,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/blktrans.h>
#include <linux/module.h>
+#include <linux/major.h>
static int mtdblock_readsect(struct mtd_blktrans_dev *dev,
unsigned long block, char *buf)
@@ -70,7 +71,7 @@ static void mtdblock_remove_dev(struct mtd_blktrans_dev *dev)
static struct mtd_blktrans_ops mtdblock_tr = {
.name = "mtdblock",
- .major = 31,
+ .major = MTD_BLOCK_MAJOR,
.part_bits = 0,
.blksize = 512,
.readsect = mtdblock_readsect,
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 684bfa39e4ee..2147e733533b 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -32,6 +32,7 @@
#include <linux/mount.h>
#include <linux/blkpg.h>
#include <linux/magic.h>
+#include <linux/major.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/map.h>
@@ -1099,7 +1100,7 @@ static unsigned long mtdchar_get_unmapped_area(struct file *file,
return (unsigned long) -EINVAL;
ret = mtd_get_unmapped_area(mtd, len, offset, flags);
- return ret == -EOPNOTSUPP ? -ENOSYS : ret;
+ return ret == -EOPNOTSUPP ? -ENODEV : ret;
}
#endif
@@ -1124,9 +1125,9 @@ static int mtdchar_mmap(struct file *file, struct vm_area_struct *vma)
#endif
return vm_iomap_memory(vma, map->phys, map->size);
}
- return -ENOSYS;
+ return -ENODEV;
#else
- return vma->vm_flags & VM_SHARED ? 0 : -ENOSYS;
+ return vma->vm_flags & VM_SHARED ? 0 : -EACCES;
#endif
}
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 5e14d540ba2f..92311a56939f 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -157,6 +157,9 @@ static ssize_t mtd_type_show(struct device *dev,
case MTD_UBIVOLUME:
type = "ubi";
break;
+ case MTD_MLCNANDFLASH:
+ type = "mlc-nand";
+ break;
default:
type = "unknown";
}
diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c
index 334da5f583c0..20c02a3b7417 100644
--- a/drivers/mtd/mtdsuper.c
+++ b/drivers/mtd/mtdsuper.c
@@ -17,6 +17,7 @@
#include <linux/export.h>
#include <linux/ctype.h>
#include <linux/slab.h>
+#include <linux/major.h>
/*
* compare superblocks to see if they're equivalent
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index d88529841d3f..93ae6a6d94f7 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -96,43 +96,15 @@ config MTD_NAND_OMAP2
config MTD_NAND_OMAP_BCH
depends on MTD_NAND && MTD_NAND_OMAP2 && ARCH_OMAP3
- tristate "Enable support for hardware BCH error correction"
+ tristate "Support hardware based BCH error correction"
default n
select BCH
- select BCH_CONST_PARAMS
help
- Support for hardware BCH error correction.
-
-choice
- prompt "BCH error correction capability"
- depends on MTD_NAND_OMAP_BCH
-
-config MTD_NAND_OMAP_BCH8
- bool "8 bits / 512 bytes (recommended)"
- help
- Support correcting up to 8 bitflips per 512-byte block.
- This will use 13 bytes of spare area per 512 bytes of page data.
- This is the recommended mode, as 4-bit mode does not work
- on some OMAP3 revisions, due to a hardware bug.
-
-config MTD_NAND_OMAP_BCH4
- bool "4 bits / 512 bytes"
- help
- Support correcting up to 4 bitflips per 512-byte block.
- This will use 7 bytes of spare area per 512 bytes of page data.
- Note that this mode does not work on some OMAP3 revisions, due to a
- hardware bug. Please check your OMAP datasheet before selecting this
- mode.
-
-endchoice
-
-if MTD_NAND_OMAP_BCH
-config BCH_CONST_M
- default 13
-config BCH_CONST_T
- default 4 if MTD_NAND_OMAP_BCH4
- default 8 if MTD_NAND_OMAP_BCH8
-endif
+ This config enables the ELM hardware engine, which can be used to
+ locate and correct errors when using BCH ECC scheme. This offloads
+ the cpu from doing ECC error searching and correction. However some
+ legacy OMAP families like OMAP2xxx, OMAP3xxx do not have ELM engine
+ so they should not enable this config symbol.
config MTD_NAND_IDS
tristate
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index bd1ce7d13702..d78a97d4153a 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -1062,56 +1062,28 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
}
/*
- * Get ECC requirement in ONFI parameters, returns -1 if ONFI
- * parameters is not supported.
- * return 0 if success to get the ECC requirement.
- */
-static int get_onfi_ecc_param(struct nand_chip *chip,
- int *ecc_bits, int *sector_size)
-{
- *ecc_bits = *sector_size = 0;
-
- if (chip->onfi_params.ecc_bits == 0xff)
- /* TODO: the sector_size and ecc_bits need to be find in
- * extended ecc parameter, currently we don't support it.
- */
- return -1;
-
- *ecc_bits = chip->onfi_params.ecc_bits;
-
- /* The default sector size (ecc codeword size) is 512 */
- *sector_size = 512;
-
- return 0;
-}
-
-/*
- * Get ecc requirement from ONFI parameters ecc requirement.
+ * Get minimum ecc requirements from NAND.
* If pmecc-cap, pmecc-sector-size in DTS are not specified, this function
- * will set them according to ONFI ecc requirement. Otherwise, use the
+ * will set them according to minimum ecc requirement. Otherwise, use the
* value in DTS file.
* return 0 if success. otherwise return error code.
*/
static int pmecc_choose_ecc(struct atmel_nand_host *host,
int *cap, int *sector_size)
{
- /* Get ECC requirement from ONFI parameters */
- *cap = *sector_size = 0;
- if (host->nand_chip.onfi_version) {
- if (!get_onfi_ecc_param(&host->nand_chip, cap, sector_size))
- dev_info(host->dev, "ONFI params, minimum required ECC: %d bits in %d bytes\n",
+ /* Get minimum ECC requirements */
+ if (host->nand_chip.ecc_strength_ds) {
+ *cap = host->nand_chip.ecc_strength_ds;
+ *sector_size = host->nand_chip.ecc_step_ds;
+ dev_info(host->dev, "minimum ECC: %d bits in %d bytes\n",
*cap, *sector_size);
- else
- dev_info(host->dev, "NAND chip ECC reqirement is in Extended ONFI parameter, we don't support yet.\n");
} else {
- dev_info(host->dev, "NAND chip is not ONFI compliant, assume ecc_bits is 2 in 512 bytes");
- }
- if (*cap == 0 && *sector_size == 0) {
*cap = 2;
*sector_size = 512;
+ dev_info(host->dev, "can't detect min. ECC, assume 2 bits in 512 bytes\n");
}
- /* If dts file doesn't specify then use the one in ONFI parameters */
+ /* If device tree doesn't specify, use NAND's minimum ECC parameters */
if (host->pmecc_corr_cap == 0) {
/* use the most fitable ecc bits (the near bigger one ) */
if (*cap <= 2)
@@ -1449,7 +1421,6 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
}
-#if defined(CONFIG_OF)
static int atmel_of_init_port(struct atmel_nand_host *host,
struct device_node *np)
{
@@ -1457,7 +1428,7 @@ static int atmel_of_init_port(struct atmel_nand_host *host,
u32 offset[2];
int ecc_mode;
struct atmel_nand_data *board = &host->board;
- enum of_gpio_flags flags;
+ enum of_gpio_flags flags = 0;
if (of_property_read_u32(np, "atmel,nand-addr-offset", &val) == 0) {
if (val >= 32) {
@@ -1540,13 +1511,6 @@ static int atmel_of_init_port(struct atmel_nand_host *host,
return 0;
}
-#else
-static int atmel_of_init_port(struct atmel_nand_host *host,
- struct device_node *np)
-{
- return -EINVAL;
-}
-#endif
static int atmel_hw_nand_init_params(struct platform_device *pdev,
struct atmel_nand_host *host)
@@ -2019,7 +1983,8 @@ static int atmel_nand_probe(struct platform_device *pdev)
mtd = &host->mtd;
nand_chip = &host->nand_chip;
host->dev = &pdev->dev;
- if (pdev->dev.of_node) {
+ if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
+ /* Only when CONFIG_OF is enabled of_node can be parsed */
res = atmel_of_init_port(host, pdev->dev.of_node);
if (res)
goto err_nand_ioremap;
@@ -2177,7 +2142,6 @@ err_no_card:
if (host->dma_chan)
dma_release_channel(host->dma_chan);
err_nand_ioremap:
- platform_driver_unregister(&atmel_nand_nfc_driver);
return res;
}
@@ -2207,14 +2171,12 @@ static int atmel_nand_remove(struct platform_device *pdev)
return 0;
}
-#if defined(CONFIG_OF)
static const struct of_device_id atmel_nand_dt_ids[] = {
{ .compatible = "atmel,at91rm9200-nand" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, atmel_nand_dt_ids);
-#endif
static int atmel_nand_nfc_probe(struct platform_device *pdev)
{
@@ -2253,12 +2215,11 @@ static int atmel_nand_nfc_probe(struct platform_device *pdev)
return 0;
}
-#if defined(CONFIG_OF)
-static struct of_device_id atmel_nand_nfc_match[] = {
+static const struct of_device_id atmel_nand_nfc_match[] = {
{ .compatible = "atmel,sama5d3-nfc" },
{ /* sentinel */ }
};
-#endif
+MODULE_DEVICE_TABLE(of, atmel_nand_nfc_match);
static struct platform_driver atmel_nand_nfc_driver = {
.driver = {
diff --git a/drivers/mtd/nand/bcm47xxnflash/main.c b/drivers/mtd/nand/bcm47xxnflash/main.c
index 7bae569fdc79..107445911315 100644
--- a/drivers/mtd/nand/bcm47xxnflash/main.c
+++ b/drivers/mtd/nand/bcm47xxnflash/main.c
@@ -29,11 +29,9 @@ static int bcm47xxnflash_probe(struct platform_device *pdev)
struct bcm47xxnflash *b47n;
int err = 0;
- b47n = kzalloc(sizeof(*b47n), GFP_KERNEL);
- if (!b47n) {
- err = -ENOMEM;
- goto out;
- }
+ b47n = devm_kzalloc(&pdev->dev, sizeof(*b47n), GFP_KERNEL);
+ if (!b47n)
+ return -ENOMEM;
b47n->nand_chip.priv = b47n;
b47n->mtd.owner = THIS_MODULE;
@@ -48,22 +46,16 @@ static int bcm47xxnflash_probe(struct platform_device *pdev)
}
if (err) {
pr_err("Initialization failed: %d\n", err);
- goto err_init;
+ return err;
}
err = mtd_device_parse_register(&b47n->mtd, probes, NULL, NULL, 0);
if (err) {
pr_err("Failed to register MTD device: %d\n", err);
- goto err_dev_reg;
+ return err;
}
return 0;
-
-err_dev_reg:
-err_init:
- kfree(b47n);
-out:
- return err;
}
static int bcm47xxnflash_remove(struct platform_device *pdev)
@@ -85,22 +77,4 @@ static struct platform_driver bcm47xxnflash_driver = {
},
};
-static int __init bcm47xxnflash_init(void)
-{
- int err;
-
- err = platform_driver_register(&bcm47xxnflash_driver);
- if (err)
- pr_err("Failed to register bcm47xx nand flash driver: %d\n",
- err);
-
- return err;
-}
-
-static void __exit bcm47xxnflash_exit(void)
-{
- platform_driver_unregister(&bcm47xxnflash_driver);
-}
-
-module_init(bcm47xxnflash_init);
-module_exit(bcm47xxnflash_exit);
+module_platform_driver(bcm47xxnflash_driver);
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 2ed2bb33a6e7..370b9dd7a278 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1394,7 +1394,7 @@ static struct nand_bbt_descr bbt_mirror_descr = {
};
/* initialize driver data structures */
-void denali_drv_init(struct denali_nand_info *denali)
+static void denali_drv_init(struct denali_nand_info *denali)
{
denali->idx = 0;
@@ -1520,7 +1520,7 @@ int denali_init(struct denali_nand_info *denali)
* so just let controller do 15bit ECC for MLC and 8bit ECC for
* SLC if possible.
* */
- if (denali->nand.cellinfo & NAND_CI_CELLTYPE_MSK &&
+ if (!nand_is_slc(&denali->nand) &&
(denali->mtd.oobsize > (denali->bbtskipbytes +
ECC_15BITS * (denali->mtd.writesize /
ECC_SECTOR_SIZE)))) {
diff --git a/drivers/mtd/nand/denali_pci.c b/drivers/mtd/nand/denali_pci.c
index e3e46623b2b4..033f177a6369 100644
--- a/drivers/mtd/nand/denali_pci.c
+++ b/drivers/mtd/nand/denali_pci.c
@@ -119,7 +119,6 @@ static void denali_pci_remove(struct pci_dev *dev)
iounmap(denali->flash_mem);
pci_release_regions(dev);
pci_disable_device(dev);
- pci_set_drvdata(dev, NULL);
kfree(denali);
}
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index eaa3c29ad860..b68a4959f700 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -38,7 +38,7 @@
#define CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS 0
#endif
-static unsigned long __initdata doc_locations[] = {
+static unsigned long doc_locations[] __initdata = {
#if defined (__alpha__) || defined(__i386__) || defined(__x86_64__)
#ifdef CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH
0xfffc8000, 0xfffca000, 0xfffcc000, 0xfffce000,
diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c
index 548db2389fab..bd1cb672034f 100644
--- a/drivers/mtd/nand/docg4.c
+++ b/drivers/mtd/nand/docg4.c
@@ -44,6 +44,7 @@
#include <linux/mtd/nand.h>
#include <linux/bch.h>
#include <linux/bitrev.h>
+#include <linux/jiffies.h>
/*
* In "reliable mode" consecutive 2k pages are used in parallel (in some
@@ -269,7 +270,7 @@ static int poll_status(struct docg4_priv *doc)
*/
uint16_t flash_status;
- unsigned int timeo;
+ unsigned long timeo;
void __iomem *docptr = doc->virtadr;
dev_dbg(doc->dev, "%s...\n", __func__);
@@ -277,22 +278,18 @@ static int poll_status(struct docg4_priv *doc)
/* hardware quirk requires reading twice initially */
flash_status = readw(docptr + DOC_FLASHCONTROL);
- timeo = 1000;
+ timeo = jiffies + msecs_to_jiffies(200); /* generous timeout */
do {
cpu_relax();
flash_status = readb(docptr + DOC_FLASHCONTROL);
- } while (!(flash_status & DOC_CTRL_FLASHREADY) && --timeo);
+ } while (!(flash_status & DOC_CTRL_FLASHREADY) &&
+ time_before(jiffies, timeo));
-
- if (!timeo) {
+ if (unlikely(!(flash_status & DOC_CTRL_FLASHREADY))) {
dev_err(doc->dev, "%s: timed out!\n", __func__);
return NAND_STATUS_FAIL;
}
- if (unlikely(timeo < 50))
- dev_warn(doc->dev, "%s: nearly timed out; %d remaining\n",
- __func__, timeo);
-
return 0;
}
@@ -1239,7 +1236,6 @@ static void __init init_mtd_structs(struct mtd_info *mtd)
nand->block_markbad = docg4_block_markbad;
nand->read_buf = docg4_read_buf;
nand->write_buf = docg4_write_buf16;
- nand->scan_bbt = nand_default_bbt;
nand->erase_cmd = docg4_erase_block;
nand->ecc.read_page = docg4_read_page;
nand->ecc.write_page = docg4_write_page;
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index e59c8860f472..c966fc7474ce 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -651,8 +651,6 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
chip->page_shift);
dev_dbg(priv->dev, "fsl_elbc_init: nand->phys_erase_shift = %d\n",
chip->phys_erase_shift);
- dev_dbg(priv->dev, "fsl_elbc_init: nand->ecclayout = %p\n",
- chip->ecclayout);
dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.mode = %d\n",
chip->ecc.mode);
dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.steps = %d\n",
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 2730c78d2bf8..43355779cff5 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -136,6 +136,69 @@ static struct nand_ecclayout oob_4096_ecc8 = {
.oobfree = { {2, 6}, {136, 82} },
};
+/* 8192-byte page size with 4-bit ECC */
+static struct nand_ecclayout oob_8192_ecc4 = {
+ .eccbytes = 128,
+ .eccpos = {
+ 8, 9, 10, 11, 12, 13, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23,
+ 24, 25, 26, 27, 28, 29, 30, 31,
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63,
+ 64, 65, 66, 67, 68, 69, 70, 71,
+ 72, 73, 74, 75, 76, 77, 78, 79,
+ 80, 81, 82, 83, 84, 85, 86, 87,
+ 88, 89, 90, 91, 92, 93, 94, 95,
+ 96, 97, 98, 99, 100, 101, 102, 103,
+ 104, 105, 106, 107, 108, 109, 110, 111,
+ 112, 113, 114, 115, 116, 117, 118, 119,
+ 120, 121, 122, 123, 124, 125, 126, 127,
+ 128, 129, 130, 131, 132, 133, 134, 135,
+ },
+ .oobfree = { {2, 6}, {136, 208} },
+};
+
+/* 8192-byte page size with 8-bit ECC -- requires 218-byte OOB */
+static struct nand_ecclayout oob_8192_ecc8 = {
+ .eccbytes = 256,
+ .eccpos = {
+ 8, 9, 10, 11, 12, 13, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23,
+ 24, 25, 26, 27, 28, 29, 30, 31,
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63,
+ 64, 65, 66, 67, 68, 69, 70, 71,
+ 72, 73, 74, 75, 76, 77, 78, 79,
+ 80, 81, 82, 83, 84, 85, 86, 87,
+ 88, 89, 90, 91, 92, 93, 94, 95,
+ 96, 97, 98, 99, 100, 101, 102, 103,
+ 104, 105, 106, 107, 108, 109, 110, 111,
+ 112, 113, 114, 115, 116, 117, 118, 119,
+ 120, 121, 122, 123, 124, 125, 126, 127,
+ 128, 129, 130, 131, 132, 133, 134, 135,
+ 136, 137, 138, 139, 140, 141, 142, 143,
+ 144, 145, 146, 147, 148, 149, 150, 151,
+ 152, 153, 154, 155, 156, 157, 158, 159,
+ 160, 161, 162, 163, 164, 165, 166, 167,
+ 168, 169, 170, 171, 172, 173, 174, 175,
+ 176, 177, 178, 179, 180, 181, 182, 183,
+ 184, 185, 186, 187, 188, 189, 190, 191,
+ 192, 193, 194, 195, 196, 197, 198, 199,
+ 200, 201, 202, 203, 204, 205, 206, 207,
+ 208, 209, 210, 211, 212, 213, 214, 215,
+ 216, 217, 218, 219, 220, 221, 222, 223,
+ 224, 225, 226, 227, 228, 229, 230, 231,
+ 232, 233, 234, 235, 236, 237, 238, 239,
+ 240, 241, 242, 243, 244, 245, 246, 247,
+ 248, 249, 250, 251, 252, 253, 254, 255,
+ 256, 257, 258, 259, 260, 261, 262, 263,
+ },
+ .oobfree = { {2, 6}, {264, 80} },
+};
/*
* Generic flash bbt descriptors
@@ -442,20 +505,29 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
if (mtd->writesize > 512) {
nand_fcr0 =
(NAND_CMD_SEQIN << IFC_NAND_FCR0_CMD0_SHIFT) |
- (NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD1_SHIFT);
+ (NAND_CMD_STATUS << IFC_NAND_FCR0_CMD1_SHIFT) |
+ (NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD2_SHIFT);
iowrite32be(
- (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
- (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
- (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
- (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP3_SHIFT) |
- (IFC_FIR_OP_CW1 << IFC_NAND_FIR0_OP4_SHIFT),
- &ifc->ifc_nand.nand_fir0);
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+ (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP3_SHIFT) |
+ (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP4_SHIFT),
+ &ifc->ifc_nand.nand_fir0);
+ iowrite32be(
+ (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT) |
+ (IFC_FIR_OP_RDSTAT <<
+ IFC_NAND_FIR1_OP6_SHIFT) |
+ (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP7_SHIFT),
+ &ifc->ifc_nand.nand_fir1);
} else {
nand_fcr0 = ((NAND_CMD_PAGEPROG <<
IFC_NAND_FCR0_CMD1_SHIFT) |
(NAND_CMD_SEQIN <<
- IFC_NAND_FCR0_CMD2_SHIFT));
+ IFC_NAND_FCR0_CMD2_SHIFT) |
+ (NAND_CMD_STATUS <<
+ IFC_NAND_FCR0_CMD3_SHIFT));
iowrite32be(
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
@@ -464,8 +536,13 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) |
(IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT),
&ifc->ifc_nand.nand_fir0);
- iowrite32be(IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT,
- &ifc->ifc_nand.nand_fir1);
+ iowrite32be(
+ (IFC_FIR_OP_CMD1 << IFC_NAND_FIR1_OP5_SHIFT) |
+ (IFC_FIR_OP_CW3 << IFC_NAND_FIR1_OP6_SHIFT) |
+ (IFC_FIR_OP_RDSTAT <<
+ IFC_NAND_FIR1_OP7_SHIFT) |
+ (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP8_SHIFT),
+ &ifc->ifc_nand.nand_fir1);
if (column >= mtd->writesize)
nand_fcr0 |=
@@ -719,8 +796,6 @@ static int fsl_ifc_chip_init_tail(struct mtd_info *mtd)
chip->page_shift);
dev_dbg(priv->dev, "%s: nand->phys_erase_shift = %d\n", __func__,
chip->phys_erase_shift);
- dev_dbg(priv->dev, "%s: nand->ecclayout = %p\n", __func__,
- chip->ecclayout);
dev_dbg(priv->dev, "%s: nand->ecc.mode = %d\n", __func__,
chip->ecc.mode);
dev_dbg(priv->dev, "%s: nand->ecc.steps = %d\n", __func__,
@@ -873,11 +948,25 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
} else {
layout = &oob_4096_ecc8;
chip->ecc.bytes = 16;
+ chip->ecc.strength = 8;
}
priv->bufnum_mask = 1;
break;
+ case CSOR_NAND_PGS_8K:
+ if ((csor & CSOR_NAND_ECC_MODE_MASK) ==
+ CSOR_NAND_ECC_MODE_4) {
+ layout = &oob_8192_ecc4;
+ } else {
+ layout = &oob_8192_ecc8;
+ chip->ecc.bytes = 16;
+ chip->ecc.strength = 8;
+ }
+
+ priv->bufnum_mask = 0;
+ break;
+
default:
dev_err(priv->dev, "bad csor %#x: bad page size\n", csor);
return -ENODEV;
@@ -908,7 +997,6 @@ static int fsl_ifc_chip_remove(struct fsl_ifc_mtd *priv)
iounmap(priv->vbase);
ifc_nand_ctrl->chips[priv->bank] = NULL;
- dev_set_drvdata(priv->dev, NULL);
return 0;
}
@@ -1083,25 +1171,7 @@ static struct platform_driver fsl_ifc_nand_driver = {
.remove = fsl_ifc_nand_remove,
};
-static int __init fsl_ifc_nand_init(void)
-{
- int ret;
-
- ret = platform_driver_register(&fsl_ifc_nand_driver);
- if (ret)
- printk(KERN_ERR "fsl-ifc: Failed to register platform"
- "driver\n");
-
- return ret;
-}
-
-static void __exit fsl_ifc_nand_exit(void)
-{
- platform_driver_unregister(&fsl_ifc_nand_driver);
-}
-
-module_init(fsl_ifc_nand_init);
-module_exit(fsl_ifc_nand_exit);
+module_platform_driver(fsl_ifc_nand_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Freescale");
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index 4f8857fa48a7..aaced29727fb 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -187,6 +187,12 @@ int gpmi_init(struct gpmi_nand_data *this)
/* Select BCH ECC. */
writel(BM_GPMI_CTRL1_BCH_MODE, r->gpmi_regs + HW_GPMI_CTRL1_SET);
+ /*
+ * Decouple the chip select from dma channel. We use dma0 for all
+ * the chips.
+ */
+ writel(BM_GPMI_CTRL1_DECOUPLE_CS, r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
gpmi_disable_clk(this);
return 0;
err_out:
@@ -1073,6 +1079,13 @@ int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
mask = MX23_BM_GPMI_DEBUG_READY0 << chip;
reg = readl(r->gpmi_regs + HW_GPMI_DEBUG);
} else if (GPMI_IS_MX28(this) || GPMI_IS_MX6Q(this)) {
+ /*
+ * In the imx6, all the ready/busy pins are bound
+ * together. So we only need to check chip 0.
+ */
+ if (GPMI_IS_MX6Q(this))
+ chip = 0;
+
/* MX28 shares the same R/B register as MX6Q. */
mask = MX28_BF_GPMI_STAT_READY_BUSY(1 << chip);
reg = readl(r->gpmi_regs + HW_GPMI_STAT);
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index a9830ff8e3f3..dabbc14db563 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -45,7 +45,10 @@ static struct nand_bbt_descr gpmi_bbt_descr = {
.pattern = scan_ff_pattern
};
-/* We will use all the (page + OOB). */
+/*
+ * We may change the layout if we can get the ECC info from the datasheet,
+ * else we will use all the (page + OOB).
+ */
static struct nand_ecclayout gpmi_hw_ecclayout = {
.eccbytes = 0,
.eccpos = { 0, },
@@ -354,9 +357,8 @@ int common_nfc_set_geometry(struct gpmi_nand_data *this)
struct dma_chan *get_dma_chan(struct gpmi_nand_data *this)
{
- int chipnr = this->current_chip;
-
- return this->dma_chans[chipnr];
+ /* We use the DMA channel 0 to access all the nand chips. */
+ return this->dma_chans[0];
}
/* Can we use the upper's buffer directly for DMA? */
@@ -392,8 +394,6 @@ static void dma_irq_callback(void *param)
struct gpmi_nand_data *this = param;
struct completion *dma_c = &this->dma_done;
- complete(dma_c);
-
switch (this->dma_type) {
case DMA_FOR_COMMAND:
dma_unmap_sg(this->dev, &this->cmd_sgl, 1, DMA_TO_DEVICE);
@@ -418,6 +418,8 @@ static void dma_irq_callback(void *param)
default:
pr_err("in wrong DMA operation.\n");
}
+
+ complete(dma_c);
}
int start_dma_without_bch_irq(struct gpmi_nand_data *this,
@@ -1263,14 +1265,22 @@ static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
static int
gpmi_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
{
- /*
- * The BCH will use all the (page + oob).
- * Our gpmi_hw_ecclayout can only prohibit the JFFS2 to write the oob.
- * But it can not stop some ioctls such MEMWRITEOOB which uses
- * MTD_OPS_PLACE_OOB. So We have to implement this function to prohibit
- * these ioctls too.
- */
- return -EPERM;
+ struct nand_oobfree *of = mtd->ecclayout->oobfree;
+ int status = 0;
+
+ /* Do we have available oob area? */
+ if (!of->length)
+ return -EPERM;
+
+ if (!nand_is_slc(chip))
+ return -EPERM;
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize + of->offset, page);
+ chip->write_buf(mtd, chip->oob_poi + of->offset, of->length);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ status = chip->waitfunc(mtd, chip);
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
}
static int gpmi_block_markbad(struct mtd_info *mtd, loff_t ofs)
@@ -1568,8 +1578,6 @@ static int gpmi_set_geometry(struct gpmi_nand_data *this)
static int gpmi_pre_bbt_scan(struct gpmi_nand_data *this)
{
- int ret;
-
/* Set up swap_block_mark, must be set before the gpmi_set_geometry() */
if (GPMI_IS_MX23(this))
this->swap_block_mark = false;
@@ -1577,12 +1585,8 @@ static int gpmi_pre_bbt_scan(struct gpmi_nand_data *this)
this->swap_block_mark = true;
/* Set up the medium geometry */
- ret = gpmi_set_geometry(this);
- if (ret)
- return ret;
+ return gpmi_set_geometry(this);
- /* NAND boot init, depends on the gpmi_set_geometry(). */
- return nand_boot_init(this);
}
static void gpmi_nfc_exit(struct gpmi_nand_data *this)
@@ -1664,7 +1668,7 @@ static int gpmi_nfc_init(struct gpmi_nand_data *this)
if (ret)
goto err_out;
- ret = nand_scan_ident(mtd, 1, NULL);
+ ret = nand_scan_ident(mtd, GPMI_IS_MX6Q(this) ? 2 : 1, NULL);
if (ret)
goto err_out;
@@ -1672,10 +1676,16 @@ static int gpmi_nfc_init(struct gpmi_nand_data *this)
if (ret)
goto err_out;
+ chip->options |= NAND_SKIP_BBTSCAN;
ret = nand_scan_tail(mtd);
if (ret)
goto err_out;
+ ret = nand_boot_init(this);
+ if (ret)
+ goto err_out;
+ chip->scan_bbt(mtd);
+
ppdata.of_node = this->pdev->dev.of_node;
ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
if (ret)
@@ -1691,19 +1701,19 @@ static const struct platform_device_id gpmi_ids[] = {
{ .name = "imx23-gpmi-nand", .driver_data = IS_MX23, },
{ .name = "imx28-gpmi-nand", .driver_data = IS_MX28, },
{ .name = "imx6q-gpmi-nand", .driver_data = IS_MX6Q, },
- {},
+ {}
};
static const struct of_device_id gpmi_nand_id_table[] = {
{
.compatible = "fsl,imx23-gpmi-nand",
- .data = (void *)&gpmi_ids[IS_MX23]
+ .data = (void *)&gpmi_ids[IS_MX23],
}, {
.compatible = "fsl,imx28-gpmi-nand",
- .data = (void *)&gpmi_ids[IS_MX28]
+ .data = (void *)&gpmi_ids[IS_MX28],
}, {
.compatible = "fsl,imx6q-gpmi-nand",
- .data = (void *)&gpmi_ids[IS_MX6Q]
+ .data = (void *)&gpmi_ids[IS_MX6Q],
}, {}
};
MODULE_DEVICE_TABLE(of, gpmi_nand_id_table);
@@ -1722,7 +1732,7 @@ static int gpmi_nand_probe(struct platform_device *pdev)
return -ENODEV;
}
- this = kzalloc(sizeof(*this), GFP_KERNEL);
+ this = devm_kzalloc(&pdev->dev, sizeof(*this), GFP_KERNEL);
if (!this) {
pr_err("Failed to allocate per-device memory\n");
return -ENOMEM;
@@ -1752,7 +1762,6 @@ exit_nfc_init:
release_resources(this);
exit_acquire_resources:
dev_err(this->dev, "driver registration failed: %d\n", ret);
- kfree(this);
return ret;
}
@@ -1763,7 +1772,6 @@ static int gpmi_nand_remove(struct platform_device *pdev)
gpmi_nfc_exit(this);
release_resources(this);
- kfree(this);
return 0;
}
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-regs.h b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h
index 53397cc290fc..82114cdc8330 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-regs.h
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h
@@ -108,6 +108,9 @@
#define HW_GPMI_CTRL1_CLR 0x00000068
#define HW_GPMI_CTRL1_TOG 0x0000006c
+#define BP_GPMI_CTRL1_DECOUPLE_CS 24
+#define BM_GPMI_CTRL1_DECOUPLE_CS (1 << BP_GPMI_CTRL1_DECOUPLE_CS)
+
#define BP_GPMI_CTRL1_WRN_DLY_SEL 22
#define BM_GPMI_CTRL1_WRN_DLY_SEL (0x3 << BP_GPMI_CTRL1_WRN_DLY_SEL)
#define BF_GPMI_CTRL1_WRN_DLY_SEL(v) \
diff --git a/drivers/mtd/nand/lpc32xx_mlc.c b/drivers/mtd/nand/lpc32xx_mlc.c
index f4dd2a887ea5..327d96c03505 100644
--- a/drivers/mtd/nand/lpc32xx_mlc.c
+++ b/drivers/mtd/nand/lpc32xx_mlc.c
@@ -905,7 +905,7 @@ static struct platform_driver lpc32xx_nand_driver = {
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
- .of_match_table = of_match_ptr(lpc32xx_nand_match),
+ .of_match_table = lpc32xx_nand_match,
},
};
diff --git a/drivers/mtd/nand/lpc32xx_slc.c b/drivers/mtd/nand/lpc32xx_slc.c
index add75709d415..23e6974ccd20 100644
--- a/drivers/mtd/nand/lpc32xx_slc.c
+++ b/drivers/mtd/nand/lpc32xx_slc.c
@@ -893,7 +893,6 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
/* Avoid extra scan if using BBT, setup BBT support */
if (host->ncfg->use_bbt) {
- chip->options |= NAND_SKIP_BBTSCAN;
chip->bbt_options |= NAND_BBT_USE_FLASH;
/*
@@ -915,13 +914,6 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
goto err_exit3;
}
- /* Standard layout in FLASH for bad block tables */
- if (host->ncfg->use_bbt) {
- if (nand_default_bbt(mtd) < 0)
- dev_err(&pdev->dev,
- "Error initializing default bad block tables\n");
- }
-
mtd->name = "nxp_lpc3220_slc";
ppdata.of_node = pdev->dev.of_node;
res = mtd_device_parse_register(mtd, NULL, &ppdata, host->ncfg->parts,
@@ -1023,7 +1015,7 @@ static struct platform_driver lpc32xx_nand_driver = {
.driver = {
.name = LPC32XX_MODNAME,
.owner = THIS_MODULE,
- .of_match_table = of_match_ptr(lpc32xx_nand_match),
+ .of_match_table = lpc32xx_nand_match,
},
};
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index ce8242b6c3e7..4edea7f4462f 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -32,6 +32,7 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/completion.h>
+#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_mtd.h>
@@ -1507,7 +1508,7 @@ static int mxcnd_probe(struct platform_device *pdev)
host->devtype_data->irq_control(host, 0);
err = devm_request_irq(&pdev->dev, host->irq, mxc_nfc_irq,
- IRQF_DISABLED, DRIVER_NAME, host);
+ 0, DRIVER_NAME, host);
if (err)
return err;
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index d340b2f198c6..bd39f7b67906 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2912,12 +2912,13 @@ static int nand_flash_detect_ext_param_page(struct mtd_info *mtd,
/* get the info we want. */
ecc = (struct onfi_ext_ecc_info *)cursor;
- if (ecc->codeword_size) {
- chip->ecc_strength_ds = ecc->ecc_bits;
- chip->ecc_step_ds = 1 << ecc->codeword_size;
+ if (!ecc->codeword_size) {
+ pr_debug("Invalid codeword size\n");
+ goto ext_out;
}
- pr_info("ONFI extended param page detected.\n");
+ chip->ecc_strength_ds = ecc->ecc_bits;
+ chip->ecc_step_ds = 1 << ecc->codeword_size;
ret = 0;
ext_out:
@@ -2935,29 +2936,34 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
int i;
int val;
- /* ONFI need to be probed in 8 bits mode, and 16 bits should be selected with NAND_BUSWIDTH_AUTO */
- if (chip->options & NAND_BUSWIDTH_16) {
- pr_err("Trying ONFI probe in 16 bits mode, aborting !\n");
- return 0;
- }
/* Try ONFI for unknown chip or LP */
chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1);
if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' ||
chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I')
return 0;
+ /*
+ * ONFI must be probed in 8-bit mode or with NAND_BUSWIDTH_AUTO, not
+ * with NAND_BUSWIDTH_16
+ */
+ if (chip->options & NAND_BUSWIDTH_16) {
+ pr_err("ONFI cannot be probed in 16-bit mode; aborting\n");
+ return 0;
+ }
+
chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
for (i = 0; i < 3; i++) {
chip->read_buf(mtd, (uint8_t *)p, sizeof(*p));
if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) ==
le16_to_cpu(p->crc)) {
- pr_info("ONFI param page %d valid\n", i);
break;
}
}
- if (i == 3)
+ if (i == 3) {
+ pr_err("Could not find valid ONFI parameter page; aborting\n");
return 0;
+ }
/* Check version */
val = le16_to_cpu(p->revision);
@@ -2981,11 +2987,23 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
sanitize_string(p->model, sizeof(p->model));
if (!mtd->name)
mtd->name = p->model;
+
mtd->writesize = le32_to_cpu(p->byte_per_page);
- mtd->erasesize = le32_to_cpu(p->pages_per_block) * mtd->writesize;
+
+ /*
+ * pages_per_block and blocks_per_lun may not be a power-of-2 size
+ * (don't ask me who thought of this...). MTD assumes that these
+ * dimensions will be power-of-2, so just truncate the remaining area.
+ */
+ mtd->erasesize = 1 << (fls(le32_to_cpu(p->pages_per_block)) - 1);
+ mtd->erasesize *= mtd->writesize;
+
mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
- chip->chipsize = le32_to_cpu(p->blocks_per_lun);
+
+ /* See erasesize comment */
+ chip->chipsize = 1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1);
chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
+ chip->bits_per_cell = p->bits_per_cell;
if (onfi_feature(chip) & ONFI_FEATURE_16_BIT_BUS)
*busw = NAND_BUSWIDTH_16;
@@ -3009,10 +3027,11 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
/* The Extended Parameter Page is supported since ONFI 2.1. */
if (nand_flash_detect_ext_param_page(mtd, chip, p))
- pr_info("Failed to detect the extended param page.\n");
+ pr_warn("Failed to detect ONFI extended param page\n");
+ } else {
+ pr_warn("Could not retrieve ONFI ECC requirements\n");
}
- pr_info("ONFI flash detected\n");
return 1;
}
@@ -3075,6 +3094,16 @@ static int nand_id_len(u8 *id_data, int arrlen)
return arrlen;
}
+/* Extract the bits of per cell from the 3rd byte of the extended ID */
+static int nand_get_bits_per_cell(u8 cellinfo)
+{
+ int bits;
+
+ bits = cellinfo & NAND_CI_CELLTYPE_MSK;
+ bits >>= NAND_CI_CELLTYPE_SHIFT;
+ return bits + 1;
+}
+
/*
* Many new NAND share similar device ID codes, which represent the size of the
* chip. The rest of the parameters must be decoded according to generic or
@@ -3085,7 +3114,7 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
{
int extid, id_len;
/* The 3rd id byte holds MLC / multichip data */
- chip->cellinfo = id_data[2];
+ chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]);
/* The 4th id byte is the important one */
extid = id_data[3];
@@ -3101,8 +3130,7 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
* ID to decide what to do.
*/
if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG &&
- (chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
- id_data[5] != 0x00) {
+ !nand_is_slc(chip) && id_data[5] != 0x00) {
/* Calc pagesize */
mtd->writesize = 2048 << (extid & 0x03);
extid >>= 2;
@@ -3134,7 +3162,7 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
(((extid >> 1) & 0x04) | (extid & 0x03));
*busw = 0;
} else if (id_len == 6 && id_data[0] == NAND_MFR_HYNIX &&
- (chip->cellinfo & NAND_CI_CELLTYPE_MSK)) {
+ !nand_is_slc(chip)) {
unsigned int tmp;
/* Calc pagesize */
@@ -3197,7 +3225,7 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
* - ID byte 5, bit[7]: 1 -> BENAND, 0 -> raw SLC
*/
if (id_len >= 6 && id_data[0] == NAND_MFR_TOSHIBA &&
- !(chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+ nand_is_slc(chip) &&
(id_data[5] & 0x7) == 0x6 /* 24nm */ &&
!(id_data[4] & 0x80) /* !BENAND */) {
mtd->oobsize = 32 * mtd->writesize >> 9;
@@ -3222,6 +3250,9 @@ static void nand_decode_id(struct mtd_info *mtd, struct nand_chip *chip,
mtd->oobsize = mtd->writesize / 32;
*busw = type->options & NAND_BUSWIDTH_16;
+ /* All legacy ID NAND are small-page, SLC */
+ chip->bits_per_cell = 1;
+
/*
* Check for Spansion/AMD ID + repeating 5th, 6th byte since
* some Spansion chips have erasesize that conflicts with size
@@ -3258,11 +3289,11 @@ static void nand_decode_bbm_options(struct mtd_info *mtd,
* Micron devices with 2KiB pages and on SLC Samsung, Hynix, Toshiba,
* AMD/Spansion, and Macronix. All others scan only the first page.
*/
- if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+ if (!nand_is_slc(chip) &&
(maf_id == NAND_MFR_SAMSUNG ||
maf_id == NAND_MFR_HYNIX))
chip->bbt_options |= NAND_BBT_SCANLASTPAGE;
- else if ((!(chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+ else if ((nand_is_slc(chip) &&
(maf_id == NAND_MFR_SAMSUNG ||
maf_id == NAND_MFR_HYNIX ||
maf_id == NAND_MFR_TOSHIBA ||
@@ -3286,7 +3317,7 @@ static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip,
mtd->erasesize = type->erasesize;
mtd->oobsize = type->oobsize;
- chip->cellinfo = id_data[2];
+ chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]);
chip->chipsize = (uint64_t)type->chipsize << 20;
chip->options |= type->options;
chip->ecc_strength_ds = NAND_ECC_STRENGTH(type);
@@ -3441,11 +3472,13 @@ ident_done:
if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
chip->cmdfunc = nand_command_lp;
- pr_info("NAND device: Manufacturer ID: 0x%02x, Chip ID: 0x%02x (%s %s),"
- " %dMiB, page size: %d, OOB size: %d\n",
+ pr_info("NAND device: Manufacturer ID: 0x%02x, Chip ID: 0x%02x (%s %s)\n",
*maf_id, *dev_id, nand_manuf_ids[maf_idx].name,
- chip->onfi_version ? chip->onfi_params.model : type->name,
- (int)(chip->chipsize >> 20), mtd->writesize, mtd->oobsize);
+ chip->onfi_version ? chip->onfi_params.model : type->name);
+
+ pr_info("NAND device: %dMiB, %s, page size: %d, OOB size: %d\n",
+ (int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
+ mtd->writesize, mtd->oobsize);
return type;
}
@@ -3525,6 +3558,7 @@ int nand_scan_tail(struct mtd_info *mtd)
{
int i;
struct nand_chip *chip = mtd->priv;
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
/* New bad blocks should be marked in OOB, flash-based BBT, or both */
BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
@@ -3541,19 +3575,19 @@ int nand_scan_tail(struct mtd_info *mtd)
/*
* If no default placement scheme is given, select an appropriate one.
*/
- if (!chip->ecc.layout && (chip->ecc.mode != NAND_ECC_SOFT_BCH)) {
+ if (!ecc->layout && (ecc->mode != NAND_ECC_SOFT_BCH)) {
switch (mtd->oobsize) {
case 8:
- chip->ecc.layout = &nand_oob_8;
+ ecc->layout = &nand_oob_8;
break;
case 16:
- chip->ecc.layout = &nand_oob_16;
+ ecc->layout = &nand_oob_16;
break;
case 64:
- chip->ecc.layout = &nand_oob_64;
+ ecc->layout = &nand_oob_64;
break;
case 128:
- chip->ecc.layout = &nand_oob_128;
+ ecc->layout = &nand_oob_128;
break;
default:
pr_warn("No oob scheme defined for oobsize %d\n",
@@ -3570,64 +3604,62 @@ int nand_scan_tail(struct mtd_info *mtd)
* selected and we have 256 byte pagesize fallback to software ECC
*/
- switch (chip->ecc.mode) {
+ switch (ecc->mode) {
case NAND_ECC_HW_OOB_FIRST:
/* Similar to NAND_ECC_HW, but a separate read_page handle */
- if (!chip->ecc.calculate || !chip->ecc.correct ||
- !chip->ecc.hwctl) {
+ if (!ecc->calculate || !ecc->correct || !ecc->hwctl) {
pr_warn("No ECC functions supplied; "
"hardware ECC not possible\n");
BUG();
}
- if (!chip->ecc.read_page)
- chip->ecc.read_page = nand_read_page_hwecc_oob_first;
+ if (!ecc->read_page)
+ ecc->read_page = nand_read_page_hwecc_oob_first;
case NAND_ECC_HW:
/* Use standard hwecc read page function? */
- if (!chip->ecc.read_page)
- chip->ecc.read_page = nand_read_page_hwecc;
- if (!chip->ecc.write_page)
- chip->ecc.write_page = nand_write_page_hwecc;
- if (!chip->ecc.read_page_raw)
- chip->ecc.read_page_raw = nand_read_page_raw;
- if (!chip->ecc.write_page_raw)
- chip->ecc.write_page_raw = nand_write_page_raw;
- if (!chip->ecc.read_oob)
- chip->ecc.read_oob = nand_read_oob_std;
- if (!chip->ecc.write_oob)
- chip->ecc.write_oob = nand_write_oob_std;
- if (!chip->ecc.read_subpage)
- chip->ecc.read_subpage = nand_read_subpage;
- if (!chip->ecc.write_subpage)
- chip->ecc.write_subpage = nand_write_subpage_hwecc;
+ if (!ecc->read_page)
+ ecc->read_page = nand_read_page_hwecc;
+ if (!ecc->write_page)
+ ecc->write_page = nand_write_page_hwecc;
+ if (!ecc->read_page_raw)
+ ecc->read_page_raw = nand_read_page_raw;
+ if (!ecc->write_page_raw)
+ ecc->write_page_raw = nand_write_page_raw;
+ if (!ecc->read_oob)
+ ecc->read_oob = nand_read_oob_std;
+ if (!ecc->write_oob)
+ ecc->write_oob = nand_write_oob_std;
+ if (!ecc->read_subpage)
+ ecc->read_subpage = nand_read_subpage;
+ if (!ecc->write_subpage)
+ ecc->write_subpage = nand_write_subpage_hwecc;
case NAND_ECC_HW_SYNDROME:
- if ((!chip->ecc.calculate || !chip->ecc.correct ||
- !chip->ecc.hwctl) &&
- (!chip->ecc.read_page ||
- chip->ecc.read_page == nand_read_page_hwecc ||
- !chip->ecc.write_page ||
- chip->ecc.write_page == nand_write_page_hwecc)) {
+ if ((!ecc->calculate || !ecc->correct || !ecc->hwctl) &&
+ (!ecc->read_page ||
+ ecc->read_page == nand_read_page_hwecc ||
+ !ecc->write_page ||
+ ecc->write_page == nand_write_page_hwecc)) {
pr_warn("No ECC functions supplied; "
"hardware ECC not possible\n");
BUG();
}
/* Use standard syndrome read/write page function? */
- if (!chip->ecc.read_page)
- chip->ecc.read_page = nand_read_page_syndrome;
- if (!chip->ecc.write_page)
- chip->ecc.write_page = nand_write_page_syndrome;
- if (!chip->ecc.read_page_raw)
- chip->ecc.read_page_raw = nand_read_page_raw_syndrome;
- if (!chip->ecc.write_page_raw)
- chip->ecc.write_page_raw = nand_write_page_raw_syndrome;
- if (!chip->ecc.read_oob)
- chip->ecc.read_oob = nand_read_oob_syndrome;
- if (!chip->ecc.write_oob)
- chip->ecc.write_oob = nand_write_oob_syndrome;
-
- if (mtd->writesize >= chip->ecc.size) {
- if (!chip->ecc.strength) {
+ if (!ecc->read_page)
+ ecc->read_page = nand_read_page_syndrome;
+ if (!ecc->write_page)
+ ecc->write_page = nand_write_page_syndrome;
+ if (!ecc->read_page_raw)
+ ecc->read_page_raw = nand_read_page_raw_syndrome;
+ if (!ecc->write_page_raw)
+ ecc->write_page_raw = nand_write_page_raw_syndrome;
+ if (!ecc->read_oob)
+ ecc->read_oob = nand_read_oob_syndrome;
+ if (!ecc->write_oob)
+ ecc->write_oob = nand_write_oob_syndrome;
+
+ if (mtd->writesize >= ecc->size) {
+ if (!ecc->strength) {
pr_warn("Driver must set ecc.strength when using hardware ECC\n");
BUG();
}
@@ -3635,23 +3667,23 @@ int nand_scan_tail(struct mtd_info *mtd)
}
pr_warn("%d byte HW ECC not possible on "
"%d byte page size, fallback to SW ECC\n",
- chip->ecc.size, mtd->writesize);
- chip->ecc.mode = NAND_ECC_SOFT;
+ ecc->size, mtd->writesize);
+ ecc->mode = NAND_ECC_SOFT;
case NAND_ECC_SOFT:
- chip->ecc.calculate = nand_calculate_ecc;
- chip->ecc.correct = nand_correct_data;
- chip->ecc.read_page = nand_read_page_swecc;
- chip->ecc.read_subpage = nand_read_subpage;
- chip->ecc.write_page = nand_write_page_swecc;
- chip->ecc.read_page_raw = nand_read_page_raw;
- chip->ecc.write_page_raw = nand_write_page_raw;
- chip->ecc.read_oob = nand_read_oob_std;
- chip->ecc.write_oob = nand_write_oob_std;
- if (!chip->ecc.size)
- chip->ecc.size = 256;
- chip->ecc.bytes = 3;
- chip->ecc.strength = 1;
+ ecc->calculate = nand_calculate_ecc;
+ ecc->correct = nand_correct_data;
+ ecc->read_page = nand_read_page_swecc;
+ ecc->read_subpage = nand_read_subpage;
+ ecc->write_page = nand_write_page_swecc;
+ ecc->read_page_raw = nand_read_page_raw;
+ ecc->write_page_raw = nand_write_page_raw;
+ ecc->read_oob = nand_read_oob_std;
+ ecc->write_oob = nand_write_oob_std;
+ if (!ecc->size)
+ ecc->size = 256;
+ ecc->bytes = 3;
+ ecc->strength = 1;
break;
case NAND_ECC_SOFT_BCH:
@@ -3659,88 +3691,83 @@ int nand_scan_tail(struct mtd_info *mtd)
pr_warn("CONFIG_MTD_ECC_BCH not enabled\n");
BUG();
}
- chip->ecc.calculate = nand_bch_calculate_ecc;
- chip->ecc.correct = nand_bch_correct_data;
- chip->ecc.read_page = nand_read_page_swecc;
- chip->ecc.read_subpage = nand_read_subpage;
- chip->ecc.write_page = nand_write_page_swecc;
- chip->ecc.read_page_raw = nand_read_page_raw;
- chip->ecc.write_page_raw = nand_write_page_raw;
- chip->ecc.read_oob = nand_read_oob_std;
- chip->ecc.write_oob = nand_write_oob_std;
+ ecc->calculate = nand_bch_calculate_ecc;
+ ecc->correct = nand_bch_correct_data;
+ ecc->read_page = nand_read_page_swecc;
+ ecc->read_subpage = nand_read_subpage;
+ ecc->write_page = nand_write_page_swecc;
+ ecc->read_page_raw = nand_read_page_raw;
+ ecc->write_page_raw = nand_write_page_raw;
+ ecc->read_oob = nand_read_oob_std;
+ ecc->write_oob = nand_write_oob_std;
/*
* Board driver should supply ecc.size and ecc.bytes values to
* select how many bits are correctable; see nand_bch_init()
* for details. Otherwise, default to 4 bits for large page
* devices.
*/
- if (!chip->ecc.size && (mtd->oobsize >= 64)) {
- chip->ecc.size = 512;
- chip->ecc.bytes = 7;
+ if (!ecc->size && (mtd->oobsize >= 64)) {
+ ecc->size = 512;
+ ecc->bytes = 7;
}
- chip->ecc.priv = nand_bch_init(mtd,
- chip->ecc.size,
- chip->ecc.bytes,
- &chip->ecc.layout);
- if (!chip->ecc.priv) {
+ ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes,
+ &ecc->layout);
+ if (!ecc->priv) {
pr_warn("BCH ECC initialization failed!\n");
BUG();
}
- chip->ecc.strength =
- chip->ecc.bytes * 8 / fls(8 * chip->ecc.size);
+ ecc->strength = ecc->bytes * 8 / fls(8 * ecc->size);
break;
case NAND_ECC_NONE:
pr_warn("NAND_ECC_NONE selected by board driver. "
"This is not recommended!\n");
- chip->ecc.read_page = nand_read_page_raw;
- chip->ecc.write_page = nand_write_page_raw;
- chip->ecc.read_oob = nand_read_oob_std;
- chip->ecc.read_page_raw = nand_read_page_raw;
- chip->ecc.write_page_raw = nand_write_page_raw;
- chip->ecc.write_oob = nand_write_oob_std;
- chip->ecc.size = mtd->writesize;
- chip->ecc.bytes = 0;
- chip->ecc.strength = 0;
+ ecc->read_page = nand_read_page_raw;
+ ecc->write_page = nand_write_page_raw;
+ ecc->read_oob = nand_read_oob_std;
+ ecc->read_page_raw = nand_read_page_raw;
+ ecc->write_page_raw = nand_write_page_raw;
+ ecc->write_oob = nand_write_oob_std;
+ ecc->size = mtd->writesize;
+ ecc->bytes = 0;
+ ecc->strength = 0;
break;
default:
- pr_warn("Invalid NAND_ECC_MODE %d\n", chip->ecc.mode);
+ pr_warn("Invalid NAND_ECC_MODE %d\n", ecc->mode);
BUG();
}
/* For many systems, the standard OOB write also works for raw */
- if (!chip->ecc.read_oob_raw)
- chip->ecc.read_oob_raw = chip->ecc.read_oob;
- if (!chip->ecc.write_oob_raw)
- chip->ecc.write_oob_raw = chip->ecc.write_oob;
+ if (!ecc->read_oob_raw)
+ ecc->read_oob_raw = ecc->read_oob;
+ if (!ecc->write_oob_raw)
+ ecc->write_oob_raw = ecc->write_oob;
/*
* The number of bytes available for a client to place data into
* the out of band area.
*/
- chip->ecc.layout->oobavail = 0;
- for (i = 0; chip->ecc.layout->oobfree[i].length
- && i < ARRAY_SIZE(chip->ecc.layout->oobfree); i++)
- chip->ecc.layout->oobavail +=
- chip->ecc.layout->oobfree[i].length;
- mtd->oobavail = chip->ecc.layout->oobavail;
+ ecc->layout->oobavail = 0;
+ for (i = 0; ecc->layout->oobfree[i].length
+ && i < ARRAY_SIZE(ecc->layout->oobfree); i++)
+ ecc->layout->oobavail += ecc->layout->oobfree[i].length;
+ mtd->oobavail = ecc->layout->oobavail;
/*
* Set the number of read / write steps for one page depending on ECC
* mode.
*/
- chip->ecc.steps = mtd->writesize / chip->ecc.size;
- if (chip->ecc.steps * chip->ecc.size != mtd->writesize) {
+ ecc->steps = mtd->writesize / ecc->size;
+ if (ecc->steps * ecc->size != mtd->writesize) {
pr_warn("Invalid ECC parameters\n");
BUG();
}
- chip->ecc.total = chip->ecc.steps * chip->ecc.bytes;
+ ecc->total = ecc->steps * ecc->bytes;
/* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
- if (!(chip->options & NAND_NO_SUBPAGE_WRITE) &&
- !(chip->cellinfo & NAND_CI_CELLTYPE_MSK)) {
- switch (chip->ecc.steps) {
+ if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) {
+ switch (ecc->steps) {
case 2:
mtd->subpage_sft = 1;
break;
@@ -3760,11 +3787,11 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->pagebuf = -1;
/* Large page NAND with SOFT_ECC should support subpage reads */
- if ((chip->ecc.mode == NAND_ECC_SOFT) && (chip->page_shift > 9))
+ if ((ecc->mode == NAND_ECC_SOFT) && (chip->page_shift > 9))
chip->options |= NAND_SUBPAGE_READ;
/* Fill in remaining MTD driver data */
- mtd->type = MTD_NANDFLASH;
+ mtd->type = nand_is_slc(chip) ? MTD_NANDFLASH : MTD_MLCNANDFLASH;
mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM :
MTD_CAP_NANDFLASH;
mtd->_erase = nand_erase;
@@ -3785,9 +3812,9 @@ int nand_scan_tail(struct mtd_info *mtd)
mtd->writebufsize = mtd->writesize;
/* propagate ecc info to mtd_info */
- mtd->ecclayout = chip->ecc.layout;
- mtd->ecc_strength = chip->ecc.strength;
- mtd->ecc_step_size = chip->ecc.size;
+ mtd->ecclayout = ecc->layout;
+ mtd->ecc_strength = ecc->strength;
+ mtd->ecc_step_size = ecc->size;
/*
* Initialize bitflip_threshold to its default prior scan_bbt() call.
* scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index bc06196d5739..c0615d1526f9 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -412,25 +412,6 @@ static void read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
}
}
-/* Scan a given block full */
-static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
- loff_t offs, uint8_t *buf, size_t readlen,
- int scanlen, int numpages)
-{
- int ret, j;
-
- ret = scan_read_oob(mtd, buf, offs, readlen);
- /* Ignore ECC errors when checking for BBM */
- if (ret && !mtd_is_bitflip_or_eccerr(ret))
- return ret;
-
- for (j = 0; j < numpages; j++, buf += scanlen) {
- if (check_pattern(buf, scanlen, mtd->writesize, bd))
- return 1;
- }
- return 0;
-}
-
/* Scan a given block partially */
static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
loff_t offs, uint8_t *buf, int numpages)
@@ -477,24 +458,17 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
struct nand_bbt_descr *bd, int chip)
{
struct nand_chip *this = mtd->priv;
- int i, numblocks, numpages, scanlen;
+ int i, numblocks, numpages;
int startblock;
loff_t from;
- size_t readlen;
pr_info("Scanning device for bad blocks\n");
- if (bd->options & NAND_BBT_SCANALLPAGES)
- numpages = 1 << (this->bbt_erase_shift - this->page_shift);
- else if (bd->options & NAND_BBT_SCAN2NDPAGE)
+ if (bd->options & NAND_BBT_SCAN2NDPAGE)
numpages = 2;
else
numpages = 1;
- /* We need only read few bytes from the OOB area */
- scanlen = 0;
- readlen = bd->len;
-
if (chip == -1) {
numblocks = mtd->size >> this->bbt_erase_shift;
startblock = 0;
@@ -519,12 +493,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
BUG_ON(bd->options & NAND_BBT_NO_OOB);
- if (bd->options & NAND_BBT_SCANALLPAGES)
- ret = scan_block_full(mtd, bd, from, buf, readlen,
- scanlen, numpages);
- else
- ret = scan_block_fast(mtd, bd, from, buf, numpages);
-
+ ret = scan_block_fast(mtd, bd, from, buf, numpages);
if (ret < 0)
return ret;
@@ -1392,4 +1361,3 @@ int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs)
}
EXPORT_SYMBOL(nand_scan_bbt);
-EXPORT_SYMBOL(nand_default_bbt);
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index d1c7de92cfdf..42e8a770e631 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -2372,7 +2372,7 @@ static int __init ns_init_module(void)
if ((retval = init_nandsim(nsmtd)) != 0)
goto err_exit;
- if ((retval = nand_default_bbt(nsmtd)) != 0)
+ if ((retval = chip->scan_bbt(nsmtd)) != 0)
goto err_exit;
if ((retval = parse_badblocks(nand, nsmtd)) != 0)
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 4ecf0e5fd484..f77725009907 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -25,10 +25,8 @@
#include <linux/of.h>
#include <linux/of_device.h>
-#ifdef CONFIG_MTD_NAND_OMAP_BCH
-#include <linux/bch.h>
+#include <linux/mtd/nand_bch.h>
#include <linux/platform_data/elm.h>
-#endif
#include <linux/platform_data/mtd-nand-omap2.h>
@@ -141,6 +139,8 @@
#define BCH_ECC_SIZE0 0x0 /* ecc_size0 = 0, no oob protection */
#define BCH_ECC_SIZE1 0x20 /* ecc_size1 = 32 */
+#define BADBLOCK_MARKER_LENGTH 2
+
#ifdef CONFIG_MTD_NAND_OMAP_BCH
static u_char bch8_vector[] = {0xf3, 0xdb, 0x14, 0x16, 0x8b, 0xd2, 0xbe, 0xcc,
0xac, 0x6b, 0xff, 0x99, 0x7b};
@@ -149,17 +149,6 @@ static u_char bch4_vector[] = {0x00, 0x6b, 0x31, 0xdd, 0x41, 0xbc, 0x10};
/* oob info generated runtime depending on ecc algorithm and layout selected */
static struct nand_ecclayout omap_oobinfo;
-/* Define some generic bad / good block scan pattern which are used
- * while scanning a device for factory marked good / bad blocks
- */
-static uint8_t scan_ff_pattern[] = { 0xff };
-static struct nand_bbt_descr bb_descrip_flashbased = {
- .options = NAND_BBT_SCANALLPAGES,
- .offs = 0,
- .len = 1,
- .pattern = scan_ff_pattern,
-};
-
struct omap_nand_info {
struct nand_hw_control controller;
@@ -182,14 +171,10 @@ struct omap_nand_info {
u_char *buf;
int buf_len;
struct gpmc_nand_regs reg;
-
-#ifdef CONFIG_MTD_NAND_OMAP_BCH
- struct bch_control *bch;
- struct nand_ecclayout ecclayout;
+ /* fields specific for BCHx_HW ECC scheme */
bool is_elm_used;
struct device *elm_dev;
struct device_node *of_node;
-#endif
};
/**
@@ -1058,8 +1043,7 @@ static int omap_dev_ready(struct mtd_info *mtd)
}
}
-#ifdef CONFIG_MTD_NAND_OMAP_BCH
-
+#if defined(CONFIG_MTD_NAND_ECC_BCH) || defined(CONFIG_MTD_NAND_OMAP_BCH)
/**
* omap3_enable_hwecc_bch - Program OMAP3 GPMC to perform BCH ECC correction
* @mtd: MTD device structure
@@ -1140,7 +1124,9 @@ static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode)
/* Clear ecc and enable bits */
writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control);
}
+#endif
+#ifdef CONFIG_MTD_NAND_ECC_BCH
/**
* omap3_calculate_ecc_bch4 - Generate 7 bytes of ECC bytes
* @mtd: MTD device structure
@@ -1225,7 +1211,9 @@ static int omap3_calculate_ecc_bch8(struct mtd_info *mtd, const u_char *dat,
return 0;
}
+#endif /* CONFIG_MTD_NAND_ECC_BCH */
+#ifdef CONFIG_MTD_NAND_OMAP_BCH
/**
* omap3_calculate_ecc_bch - Generate bytes of ECC bytes
* @mtd: MTD device structure
@@ -1519,38 +1507,6 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data,
}
/**
- * omap3_correct_data_bch - Decode received data and correct errors
- * @mtd: MTD device structure
- * @data: page data
- * @read_ecc: ecc read from nand flash
- * @calc_ecc: ecc read from HW ECC registers
- */
-static int omap3_correct_data_bch(struct mtd_info *mtd, u_char *data,
- u_char *read_ecc, u_char *calc_ecc)
-{
- int i, count;
- /* cannot correct more than 8 errors */
- unsigned int errloc[8];
- struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
- mtd);
-
- count = decode_bch(info->bch, NULL, 512, read_ecc, calc_ecc, NULL,
- errloc);
- if (count > 0) {
- /* correct errors */
- for (i = 0; i < count; i++) {
- /* correct data only, not ecc bytes */
- if (errloc[i] < 8*512)
- data[errloc[i]/8] ^= 1 << (errloc[i] & 7);
- pr_debug("corrected bitflip %u\n", errloc[i]);
- }
- } else if (count < 0) {
- pr_err("ecc unrecoverable error\n");
- }
- return count;
-}
-
-/**
* omap_write_page_bch - BCH ecc based write page function for entire page
* @mtd: mtd info structure
* @chip: nand chip info structure
@@ -1637,197 +1593,46 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * omap3_free_bch - Release BCH ecc resources
- * @mtd: MTD device structure
- */
-static void omap3_free_bch(struct mtd_info *mtd)
-{
- struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
- mtd);
- if (info->bch) {
- free_bch(info->bch);
- info->bch = NULL;
- }
-}
-
-/**
- * omap3_init_bch - Initialize BCH ECC
- * @mtd: MTD device structure
- * @ecc_opt: OMAP ECC mode (OMAP_ECC_BCH4_CODE_HW or OMAP_ECC_BCH8_CODE_HW)
- */
-static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
-{
- int max_errors;
- struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
- mtd);
-#ifdef CONFIG_MTD_NAND_OMAP_BCH8
- const int hw_errors = BCH8_MAX_ERROR;
-#else
- const int hw_errors = BCH4_MAX_ERROR;
-#endif
- enum bch_ecc bch_type;
- const __be32 *parp;
- int lenp;
- struct device_node *elm_node;
-
- info->bch = NULL;
-
- max_errors = (ecc_opt == OMAP_ECC_BCH8_CODE_HW) ?
- BCH8_MAX_ERROR : BCH4_MAX_ERROR;
- if (max_errors != hw_errors) {
- pr_err("cannot configure %d-bit BCH ecc, only %d-bit supported",
- max_errors, hw_errors);
- goto fail;
- }
-
- info->nand.ecc.size = 512;
- info->nand.ecc.hwctl = omap3_enable_hwecc_bch;
- info->nand.ecc.mode = NAND_ECC_HW;
- info->nand.ecc.strength = max_errors;
-
- if (hw_errors == BCH8_MAX_ERROR)
- bch_type = BCH8_ECC;
- else
- bch_type = BCH4_ECC;
-
- /* Detect availability of ELM module */
- parp = of_get_property(info->of_node, "elm_id", &lenp);
- if ((parp == NULL) && (lenp != (sizeof(void *) * 2))) {
- pr_err("Missing elm_id property, fall back to Software BCH\n");
- info->is_elm_used = false;
- } else {
- struct platform_device *pdev;
-
- elm_node = of_find_node_by_phandle(be32_to_cpup(parp));
- pdev = of_find_device_by_node(elm_node);
- info->elm_dev = &pdev->dev;
-
- if (elm_config(info->elm_dev, bch_type) == 0)
- info->is_elm_used = true;
- }
-
- if (info->is_elm_used && (mtd->writesize <= 4096)) {
-
- if (hw_errors == BCH8_MAX_ERROR)
- info->nand.ecc.bytes = BCH8_SIZE;
- else
- info->nand.ecc.bytes = BCH4_SIZE;
-
- info->nand.ecc.correct = omap_elm_correct_data;
- info->nand.ecc.calculate = omap3_calculate_ecc_bch;
- info->nand.ecc.read_page = omap_read_page_bch;
- info->nand.ecc.write_page = omap_write_page_bch;
- } else {
- /*
- * software bch library is only used to detect and
- * locate errors
- */
- info->bch = init_bch(13, max_errors,
- 0x201b /* hw polynomial */);
- if (!info->bch)
- goto fail;
-
- info->nand.ecc.correct = omap3_correct_data_bch;
-
- /*
- * The number of corrected errors in an ecc block that will
- * trigger block scrubbing defaults to the ecc strength (4 or 8)
- * Set mtd->bitflip_threshold here to define a custom threshold.
- */
-
- if (max_errors == 8) {
- info->nand.ecc.bytes = 13;
- info->nand.ecc.calculate = omap3_calculate_ecc_bch8;
- } else {
- info->nand.ecc.bytes = 7;
- info->nand.ecc.calculate = omap3_calculate_ecc_bch4;
- }
- }
-
- pr_info("enabling NAND BCH ecc with %d-bit correction\n", max_errors);
- return 0;
-fail:
- omap3_free_bch(mtd);
- return -1;
-}
-
-/**
- * omap3_init_bch_tail - Build an oob layout for BCH ECC correction.
- * @mtd: MTD device structure
+ * is_elm_present - checks for presence of ELM module by scanning DT nodes
+ * @omap_nand_info: NAND device structure containing platform data
+ * @bch_type: 0x0=BCH4, 0x1=BCH8, 0x2=BCH16
*/
-static int omap3_init_bch_tail(struct mtd_info *mtd)
+static int is_elm_present(struct omap_nand_info *info,
+ struct device_node *elm_node, enum bch_ecc bch_type)
{
- int i, steps, offset;
- struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
- mtd);
- struct nand_ecclayout *layout = &info->ecclayout;
-
- /* build oob layout */
- steps = mtd->writesize/info->nand.ecc.size;
- layout->eccbytes = steps*info->nand.ecc.bytes;
-
- /* do not bother creating special oob layouts for small page devices */
- if (mtd->oobsize < 64) {
- pr_err("BCH ecc is not supported on small page devices\n");
- goto fail;
+ struct platform_device *pdev;
+ info->is_elm_used = false;
+ /* check whether elm-id is passed via DT */
+ if (!elm_node) {
+ pr_err("nand: error: ELM DT node not found\n");
+ return -ENODEV;
}
-
- /* reserve 2 bytes for bad block marker */
- if (layout->eccbytes+2 > mtd->oobsize) {
- pr_err("no oob layout available for oobsize %d eccbytes %u\n",
- mtd->oobsize, layout->eccbytes);
- goto fail;
+ pdev = of_find_device_by_node(elm_node);
+ /* check whether ELM device is registered */
+ if (!pdev) {
+ pr_err("nand: error: ELM device not found\n");
+ return -ENODEV;
}
-
- /* ECC layout compatible with RBL for BCH8 */
- if (info->is_elm_used && (info->nand.ecc.bytes == BCH8_SIZE))
- offset = 2;
- else
- offset = mtd->oobsize - layout->eccbytes;
-
- /* put ecc bytes at oob tail */
- for (i = 0; i < layout->eccbytes; i++)
- layout->eccpos[i] = offset + i;
-
- if (info->is_elm_used && (info->nand.ecc.bytes == BCH8_SIZE))
- layout->oobfree[0].offset = 2 + layout->eccbytes * steps;
- else
- layout->oobfree[0].offset = 2;
-
- layout->oobfree[0].length = mtd->oobsize-2-layout->eccbytes;
- info->nand.ecc.layout = layout;
-
- if (!(info->nand.options & NAND_BUSWIDTH_16))
- info->nand.badblock_pattern = &bb_descrip_flashbased;
+ /* ELM module available, now configure it */
+ info->elm_dev = &pdev->dev;
+ if (elm_config(info->elm_dev, bch_type))
+ return -ENODEV;
+ info->is_elm_used = true;
return 0;
-fail:
- omap3_free_bch(mtd);
- return -1;
-}
-
-#else
-static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
-{
- pr_err("CONFIG_MTD_NAND_OMAP_BCH is not enabled\n");
- return -1;
-}
-static int omap3_init_bch_tail(struct mtd_info *mtd)
-{
- return -1;
-}
-static void omap3_free_bch(struct mtd_info *mtd)
-{
}
-#endif /* CONFIG_MTD_NAND_OMAP_BCH */
+#endif /* CONFIG_MTD_NAND_ECC_BCH */
static int omap_nand_probe(struct platform_device *pdev)
{
struct omap_nand_info *info;
struct omap_nand_platform_data *pdata;
+ struct mtd_info *mtd;
+ struct nand_chip *nand_chip;
+ struct nand_ecclayout *ecclayout;
int err;
- int i, offset;
- dma_cap_mask_t mask;
- unsigned sig;
+ int i;
+ dma_cap_mask_t mask;
+ unsigned sig;
struct resource *res;
struct mtd_part_parser_data ppdata = {};
@@ -1837,7 +1642,8 @@ static int omap_nand_probe(struct platform_device *pdev)
return -ENODEV;
}
- info = kzalloc(sizeof(struct omap_nand_info), GFP_KERNEL);
+ info = devm_kzalloc(&pdev->dev, sizeof(struct omap_nand_info),
+ GFP_KERNEL);
if (!info)
return -ENOMEM;
@@ -1846,47 +1652,45 @@ static int omap_nand_probe(struct platform_device *pdev)
spin_lock_init(&info->controller.lock);
init_waitqueue_head(&info->controller.wq);
- info->pdev = pdev;
-
+ info->pdev = pdev;
info->gpmc_cs = pdata->cs;
info->reg = pdata->reg;
-
- info->mtd.priv = &info->nand;
- info->mtd.name = dev_name(&pdev->dev);
- info->mtd.owner = THIS_MODULE;
-
- info->nand.options = pdata->devsize;
- info->nand.options |= NAND_SKIP_BBTSCAN;
-#ifdef CONFIG_MTD_NAND_OMAP_BCH
info->of_node = pdata->of_node;
-#endif
+ mtd = &info->mtd;
+ mtd->priv = &info->nand;
+ mtd->name = dev_name(&pdev->dev);
+ mtd->owner = THIS_MODULE;
+ nand_chip = &info->nand;
+ nand_chip->ecc.priv = NULL;
+ nand_chip->options |= NAND_SKIP_BBTSCAN;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
err = -EINVAL;
dev_err(&pdev->dev, "error getting memory resource\n");
- goto out_free_info;
+ goto return_error;
}
info->phys_base = res->start;
info->mem_size = resource_size(res);
- if (!request_mem_region(info->phys_base, info->mem_size,
- pdev->dev.driver->name)) {
+ if (!devm_request_mem_region(&pdev->dev, info->phys_base,
+ info->mem_size, pdev->dev.driver->name)) {
err = -EBUSY;
- goto out_free_info;
+ goto return_error;
}
- info->nand.IO_ADDR_R = ioremap(info->phys_base, info->mem_size);
- if (!info->nand.IO_ADDR_R) {
+ nand_chip->IO_ADDR_R = devm_ioremap(&pdev->dev, info->phys_base,
+ info->mem_size);
+ if (!nand_chip->IO_ADDR_R) {
err = -ENOMEM;
- goto out_release_mem_region;
+ goto return_error;
}
- info->nand.controller = &info->controller;
+ nand_chip->controller = &info->controller;
- info->nand.IO_ADDR_W = info->nand.IO_ADDR_R;
- info->nand.cmd_ctrl = omap_hwcontrol;
+ nand_chip->IO_ADDR_W = nand_chip->IO_ADDR_R;
+ nand_chip->cmd_ctrl = omap_hwcontrol;
/*
* If RDY/BSY line is connected to OMAP then use the omap ready
@@ -1896,26 +1700,42 @@ static int omap_nand_probe(struct platform_device *pdev)
* device and read status register until you get a failure or success
*/
if (pdata->dev_ready) {
- info->nand.dev_ready = omap_dev_ready;
- info->nand.chip_delay = 0;
+ nand_chip->dev_ready = omap_dev_ready;
+ nand_chip->chip_delay = 0;
} else {
- info->nand.waitfunc = omap_wait;
- info->nand.chip_delay = 50;
+ nand_chip->waitfunc = omap_wait;
+ nand_chip->chip_delay = 50;
}
+ /* scan NAND device connected to chip controller */
+ nand_chip->options |= pdata->devsize & NAND_BUSWIDTH_16;
+ if (nand_scan_ident(mtd, 1, NULL)) {
+ pr_err("nand device scan failed, may be bus-width mismatch\n");
+ err = -ENXIO;
+ goto return_error;
+ }
+
+ /* check for small page devices */
+ if ((mtd->oobsize < 64) && (pdata->ecc_opt != OMAP_ECC_HAM1_CODE_HW)) {
+ pr_err("small page devices are not supported\n");
+ err = -EINVAL;
+ goto return_error;
+ }
+
+ /* re-populate low-level callbacks based on xfer modes */
switch (pdata->xfer_type) {
case NAND_OMAP_PREFETCH_POLLED:
- info->nand.read_buf = omap_read_buf_pref;
- info->nand.write_buf = omap_write_buf_pref;
+ nand_chip->read_buf = omap_read_buf_pref;
+ nand_chip->write_buf = omap_write_buf_pref;
break;
case NAND_OMAP_POLLED:
- if (info->nand.options & NAND_BUSWIDTH_16) {
- info->nand.read_buf = omap_read_buf16;
- info->nand.write_buf = omap_write_buf16;
+ if (nand_chip->options & NAND_BUSWIDTH_16) {
+ nand_chip->read_buf = omap_read_buf16;
+ nand_chip->write_buf = omap_write_buf16;
} else {
- info->nand.read_buf = omap_read_buf8;
- info->nand.write_buf = omap_write_buf8;
+ nand_chip->read_buf = omap_read_buf8;
+ nand_chip->write_buf = omap_write_buf8;
}
break;
@@ -1927,7 +1747,7 @@ static int omap_nand_probe(struct platform_device *pdev)
if (!info->dma) {
dev_err(&pdev->dev, "DMA engine request failed\n");
err = -ENXIO;
- goto out_release_mem_region;
+ goto return_error;
} else {
struct dma_slave_config cfg;
@@ -1942,10 +1762,10 @@ static int omap_nand_probe(struct platform_device *pdev)
if (err) {
dev_err(&pdev->dev, "DMA engine slave config failed: %d\n",
err);
- goto out_release_mem_region;
+ goto return_error;
}
- info->nand.read_buf = omap_read_buf_dma_pref;
- info->nand.write_buf = omap_write_buf_dma_pref;
+ nand_chip->read_buf = omap_read_buf_dma_pref;
+ nand_chip->write_buf = omap_write_buf_dma_pref;
}
break;
@@ -1954,34 +1774,36 @@ static int omap_nand_probe(struct platform_device *pdev)
if (info->gpmc_irq_fifo <= 0) {
dev_err(&pdev->dev, "error getting fifo irq\n");
err = -ENODEV;
- goto out_release_mem_region;
+ goto return_error;
}
- err = request_irq(info->gpmc_irq_fifo, omap_nand_irq,
- IRQF_SHARED, "gpmc-nand-fifo", info);
+ err = devm_request_irq(&pdev->dev, info->gpmc_irq_fifo,
+ omap_nand_irq, IRQF_SHARED,
+ "gpmc-nand-fifo", info);
if (err) {
dev_err(&pdev->dev, "requesting irq(%d) error:%d",
info->gpmc_irq_fifo, err);
info->gpmc_irq_fifo = 0;
- goto out_release_mem_region;
+ goto return_error;
}
info->gpmc_irq_count = platform_get_irq(pdev, 1);
if (info->gpmc_irq_count <= 0) {
dev_err(&pdev->dev, "error getting count irq\n");
err = -ENODEV;
- goto out_release_mem_region;
+ goto return_error;
}
- err = request_irq(info->gpmc_irq_count, omap_nand_irq,
- IRQF_SHARED, "gpmc-nand-count", info);
+ err = devm_request_irq(&pdev->dev, info->gpmc_irq_count,
+ omap_nand_irq, IRQF_SHARED,
+ "gpmc-nand-count", info);
if (err) {
dev_err(&pdev->dev, "requesting irq(%d) error:%d",
info->gpmc_irq_count, err);
info->gpmc_irq_count = 0;
- goto out_release_mem_region;
+ goto return_error;
}
- info->nand.read_buf = omap_read_buf_irq_pref;
- info->nand.write_buf = omap_write_buf_irq_pref;
+ nand_chip->read_buf = omap_read_buf_irq_pref;
+ nand_chip->write_buf = omap_write_buf_irq_pref;
break;
@@ -1989,117 +1811,223 @@ static int omap_nand_probe(struct platform_device *pdev)
dev_err(&pdev->dev,
"xfer_type(%d) not supported!\n", pdata->xfer_type);
err = -EINVAL;
- goto out_release_mem_region;
+ goto return_error;
}
- /* select the ecc type */
- if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_DEFAULT)
- info->nand.ecc.mode = NAND_ECC_SOFT;
- else if ((pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW) ||
- (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE)) {
- info->nand.ecc.bytes = 3;
- info->nand.ecc.size = 512;
- info->nand.ecc.strength = 1;
- info->nand.ecc.calculate = omap_calculate_ecc;
- info->nand.ecc.hwctl = omap_enable_hwecc;
- info->nand.ecc.correct = omap_correct_data;
- info->nand.ecc.mode = NAND_ECC_HW;
- } else if ((pdata->ecc_opt == OMAP_ECC_BCH4_CODE_HW) ||
- (pdata->ecc_opt == OMAP_ECC_BCH8_CODE_HW)) {
- err = omap3_init_bch(&info->mtd, pdata->ecc_opt);
- if (err) {
+ /* populate MTD interface based on ECC scheme */
+ nand_chip->ecc.layout = &omap_oobinfo;
+ ecclayout = &omap_oobinfo;
+ switch (pdata->ecc_opt) {
+ case OMAP_ECC_HAM1_CODE_HW:
+ pr_info("nand: using OMAP_ECC_HAM1_CODE_HW\n");
+ nand_chip->ecc.mode = NAND_ECC_HW;
+ nand_chip->ecc.bytes = 3;
+ nand_chip->ecc.size = 512;
+ nand_chip->ecc.strength = 1;
+ nand_chip->ecc.calculate = omap_calculate_ecc;
+ nand_chip->ecc.hwctl = omap_enable_hwecc;
+ nand_chip->ecc.correct = omap_correct_data;
+ /* define ECC layout */
+ ecclayout->eccbytes = nand_chip->ecc.bytes *
+ (mtd->writesize /
+ nand_chip->ecc.size);
+ if (nand_chip->options & NAND_BUSWIDTH_16)
+ ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH;
+ else
+ ecclayout->eccpos[0] = 1;
+ ecclayout->oobfree->offset = ecclayout->eccpos[0] +
+ ecclayout->eccbytes;
+ break;
+
+ case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
+#ifdef CONFIG_MTD_NAND_ECC_BCH
+ pr_info("nand: using OMAP_ECC_BCH4_CODE_HW_DETECTION_SW\n");
+ nand_chip->ecc.mode = NAND_ECC_HW;
+ nand_chip->ecc.size = 512;
+ nand_chip->ecc.bytes = 7;
+ nand_chip->ecc.strength = 4;
+ nand_chip->ecc.hwctl = omap3_enable_hwecc_bch;
+ nand_chip->ecc.correct = nand_bch_correct_data;
+ nand_chip->ecc.calculate = omap3_calculate_ecc_bch4;
+ /* define ECC layout */
+ ecclayout->eccbytes = nand_chip->ecc.bytes *
+ (mtd->writesize /
+ nand_chip->ecc.size);
+ ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH;
+ ecclayout->oobfree->offset = ecclayout->eccpos[0] +
+ ecclayout->eccbytes;
+ /* software bch library is used for locating errors */
+ nand_chip->ecc.priv = nand_bch_init(mtd,
+ nand_chip->ecc.size,
+ nand_chip->ecc.bytes,
+ &nand_chip->ecc.layout);
+ if (!nand_chip->ecc.priv) {
+ pr_err("nand: error: unable to use s/w BCH library\n");
err = -EINVAL;
- goto out_release_mem_region;
}
- }
+ break;
+#else
+ pr_err("nand: error: CONFIG_MTD_NAND_ECC_BCH not enabled\n");
+ err = -EINVAL;
+ goto return_error;
+#endif
- /* DIP switches on some boards change between 8 and 16 bit
- * bus widths for flash. Try the other width if the first try fails.
- */
- if (nand_scan_ident(&info->mtd, 1, NULL)) {
- info->nand.options ^= NAND_BUSWIDTH_16;
- if (nand_scan_ident(&info->mtd, 1, NULL)) {
- err = -ENXIO;
- goto out_release_mem_region;
+ case OMAP_ECC_BCH4_CODE_HW:
+#ifdef CONFIG_MTD_NAND_OMAP_BCH
+ pr_info("nand: using OMAP_ECC_BCH4_CODE_HW ECC scheme\n");
+ nand_chip->ecc.mode = NAND_ECC_HW;
+ nand_chip->ecc.size = 512;
+ /* 14th bit is kept reserved for ROM-code compatibility */
+ nand_chip->ecc.bytes = 7 + 1;
+ nand_chip->ecc.strength = 4;
+ nand_chip->ecc.hwctl = omap3_enable_hwecc_bch;
+ nand_chip->ecc.correct = omap_elm_correct_data;
+ nand_chip->ecc.calculate = omap3_calculate_ecc_bch;
+ nand_chip->ecc.read_page = omap_read_page_bch;
+ nand_chip->ecc.write_page = omap_write_page_bch;
+ /* define ECC layout */
+ ecclayout->eccbytes = nand_chip->ecc.bytes *
+ (mtd->writesize /
+ nand_chip->ecc.size);
+ ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH;
+ ecclayout->oobfree->offset = ecclayout->eccpos[0] +
+ ecclayout->eccbytes;
+ /* This ECC scheme requires ELM H/W block */
+ if (is_elm_present(info, pdata->elm_of_node, BCH4_ECC) < 0) {
+ pr_err("nand: error: could not initialize ELM\n");
+ err = -ENODEV;
+ goto return_error;
}
- }
-
- /* rom code layout */
- if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE) {
+ break;
+#else
+ pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n");
+ err = -EINVAL;
+ goto return_error;
+#endif
- if (info->nand.options & NAND_BUSWIDTH_16)
- offset = 2;
- else {
- offset = 1;
- info->nand.badblock_pattern = &bb_descrip_flashbased;
- }
- omap_oobinfo.eccbytes = 3 * (info->mtd.oobsize/16);
- for (i = 0; i < omap_oobinfo.eccbytes; i++)
- omap_oobinfo.eccpos[i] = i+offset;
-
- omap_oobinfo.oobfree->offset = offset + omap_oobinfo.eccbytes;
- omap_oobinfo.oobfree->length = info->mtd.oobsize -
- (offset + omap_oobinfo.eccbytes);
-
- info->nand.ecc.layout = &omap_oobinfo;
- } else if ((pdata->ecc_opt == OMAP_ECC_BCH4_CODE_HW) ||
- (pdata->ecc_opt == OMAP_ECC_BCH8_CODE_HW)) {
- /* build OOB layout for BCH ECC correction */
- err = omap3_init_bch_tail(&info->mtd);
- if (err) {
+ case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+#ifdef CONFIG_MTD_NAND_ECC_BCH
+ pr_info("nand: using OMAP_ECC_BCH8_CODE_HW_DETECTION_SW\n");
+ nand_chip->ecc.mode = NAND_ECC_HW;
+ nand_chip->ecc.size = 512;
+ nand_chip->ecc.bytes = 13;
+ nand_chip->ecc.strength = 8;
+ nand_chip->ecc.hwctl = omap3_enable_hwecc_bch;
+ nand_chip->ecc.correct = nand_bch_correct_data;
+ nand_chip->ecc.calculate = omap3_calculate_ecc_bch8;
+ /* define ECC layout */
+ ecclayout->eccbytes = nand_chip->ecc.bytes *
+ (mtd->writesize /
+ nand_chip->ecc.size);
+ ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH;
+ ecclayout->oobfree->offset = ecclayout->eccpos[0] +
+ ecclayout->eccbytes;
+ /* software bch library is used for locating errors */
+ nand_chip->ecc.priv = nand_bch_init(mtd,
+ nand_chip->ecc.size,
+ nand_chip->ecc.bytes,
+ &nand_chip->ecc.layout);
+ if (!nand_chip->ecc.priv) {
+ pr_err("nand: error: unable to use s/w BCH library\n");
err = -EINVAL;
- goto out_release_mem_region;
+ goto return_error;
+ }
+ break;
+#else
+ pr_err("nand: error: CONFIG_MTD_NAND_ECC_BCH not enabled\n");
+ err = -EINVAL;
+ goto return_error;
+#endif
+
+ case OMAP_ECC_BCH8_CODE_HW:
+#ifdef CONFIG_MTD_NAND_OMAP_BCH
+ pr_info("nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme\n");
+ nand_chip->ecc.mode = NAND_ECC_HW;
+ nand_chip->ecc.size = 512;
+ /* 14th bit is kept reserved for ROM-code compatibility */
+ nand_chip->ecc.bytes = 13 + 1;
+ nand_chip->ecc.strength = 8;
+ nand_chip->ecc.hwctl = omap3_enable_hwecc_bch;
+ nand_chip->ecc.correct = omap_elm_correct_data;
+ nand_chip->ecc.calculate = omap3_calculate_ecc_bch;
+ nand_chip->ecc.read_page = omap_read_page_bch;
+ nand_chip->ecc.write_page = omap_write_page_bch;
+ /* This ECC scheme requires ELM H/W block */
+ err = is_elm_present(info, pdata->elm_of_node, BCH8_ECC);
+ if (err < 0) {
+ pr_err("nand: error: could not initialize ELM\n");
+ goto return_error;
}
+ /* define ECC layout */
+ ecclayout->eccbytes = nand_chip->ecc.bytes *
+ (mtd->writesize /
+ nand_chip->ecc.size);
+ ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH;
+ ecclayout->oobfree->offset = ecclayout->eccpos[0] +
+ ecclayout->eccbytes;
+ break;
+#else
+ pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n");
+ err = -EINVAL;
+ goto return_error;
+#endif
+
+ default:
+ pr_err("nand: error: invalid or unsupported ECC scheme\n");
+ err = -EINVAL;
+ goto return_error;
+ }
+
+ /* populate remaining ECC layout data */
+ ecclayout->oobfree->length = mtd->oobsize - (BADBLOCK_MARKER_LENGTH +
+ ecclayout->eccbytes);
+ for (i = 1; i < ecclayout->eccbytes; i++)
+ ecclayout->eccpos[i] = ecclayout->eccpos[0] + i;
+ /* check if NAND device's OOB is enough to store ECC signatures */
+ if (mtd->oobsize < (ecclayout->eccbytes + BADBLOCK_MARKER_LENGTH)) {
+ pr_err("not enough OOB bytes required = %d, available=%d\n",
+ ecclayout->eccbytes, mtd->oobsize);
+ err = -EINVAL;
+ goto return_error;
}
/* second phase scan */
- if (nand_scan_tail(&info->mtd)) {
+ if (nand_scan_tail(mtd)) {
err = -ENXIO;
- goto out_release_mem_region;
+ goto return_error;
}
ppdata.of_node = pdata->of_node;
- mtd_device_parse_register(&info->mtd, NULL, &ppdata, pdata->parts,
+ mtd_device_parse_register(mtd, NULL, &ppdata, pdata->parts,
pdata->nr_parts);
- platform_set_drvdata(pdev, &info->mtd);
+ platform_set_drvdata(pdev, mtd);
return 0;
-out_release_mem_region:
+return_error:
if (info->dma)
dma_release_channel(info->dma);
- if (info->gpmc_irq_count > 0)
- free_irq(info->gpmc_irq_count, info);
- if (info->gpmc_irq_fifo > 0)
- free_irq(info->gpmc_irq_fifo, info);
- release_mem_region(info->phys_base, info->mem_size);
-out_free_info:
- kfree(info);
-
+ if (nand_chip->ecc.priv) {
+ nand_bch_free(nand_chip->ecc.priv);
+ nand_chip->ecc.priv = NULL;
+ }
return err;
}
static int omap_nand_remove(struct platform_device *pdev)
{
struct mtd_info *mtd = platform_get_drvdata(pdev);
+ struct nand_chip *nand_chip = mtd->priv;
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
- omap3_free_bch(&info->mtd);
-
+ if (nand_chip->ecc.priv) {
+ nand_bch_free(nand_chip->ecc.priv);
+ nand_chip->ecc.priv = NULL;
+ }
if (info->dma)
dma_release_channel(info->dma);
-
- if (info->gpmc_irq_count > 0)
- free_irq(info->gpmc_irq_count, info);
- if (info->gpmc_irq_fifo > 0)
- free_irq(info->gpmc_irq_fifo, info);
-
- /* Release NAND device, its internal structures and partitions */
- nand_release(&info->mtd);
- iounmap(info->nand.IO_ADDR_R);
- release_mem_region(info->phys_base, info->mem_size);
- kfree(info);
+ nand_release(mtd);
return 0;
}
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index c28d4e29af1a..4cabdc9fda90 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -39,6 +39,13 @@
#define NAND_STOP_DELAY (2 * HZ/50)
#define PAGE_CHUNK_SIZE (2048)
+/*
+ * Define a buffer size for the initial command that detects the flash device:
+ * STATUS, READID and PARAM. The largest of these is the PARAM command,
+ * needing 256 bytes.
+ */
+#define INIT_BUFFER_SIZE 256
+
/* registers and bit definitions */
#define NDCR (0x00) /* Control register */
#define NDTR0CS0 (0x04) /* Timing Parameter 0 for CS0 */
@@ -164,6 +171,7 @@ struct pxa3xx_nand_info {
unsigned int buf_start;
unsigned int buf_count;
+ unsigned int buf_size;
/* DMA information */
int drcmr_dat;
@@ -540,7 +548,6 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
info->oob_size = 0;
info->use_ecc = 0;
info->use_spare = 1;
- info->use_dma = (use_dma) ? 1 : 0;
info->is_ready = 0;
info->retcode = ERR_NONE;
if (info->cs != 0)
@@ -912,26 +919,20 @@ static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
return 0;
}
-/* the maximum possible buffer size for large page with OOB data
- * is: 2048 + 64 = 2112 bytes, allocate a page here for both the
- * data buffer and the DMA descriptor
- */
-#define MAX_BUFF_SIZE PAGE_SIZE
-
#ifdef ARCH_HAS_DMA
static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
{
struct platform_device *pdev = info->pdev;
- int data_desc_offset = MAX_BUFF_SIZE - sizeof(struct pxa_dma_desc);
+ int data_desc_offset = info->buf_size - sizeof(struct pxa_dma_desc);
if (use_dma == 0) {
- info->data_buff = kmalloc(MAX_BUFF_SIZE, GFP_KERNEL);
+ info->data_buff = kmalloc(info->buf_size, GFP_KERNEL);
if (info->data_buff == NULL)
return -ENOMEM;
return 0;
}
- info->data_buff = dma_alloc_coherent(&pdev->dev, MAX_BUFF_SIZE,
+ info->data_buff = dma_alloc_coherent(&pdev->dev, info->buf_size,
&info->data_buff_phys, GFP_KERNEL);
if (info->data_buff == NULL) {
dev_err(&pdev->dev, "failed to allocate dma buffer\n");
@@ -945,11 +946,16 @@ static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
pxa3xx_nand_data_dma_irq, info);
if (info->data_dma_ch < 0) {
dev_err(&pdev->dev, "failed to request data dma\n");
- dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE,
+ dma_free_coherent(&pdev->dev, info->buf_size,
info->data_buff, info->data_buff_phys);
return info->data_dma_ch;
}
+ /*
+ * Now that DMA buffers are allocated we turn on
+ * DMA proper for I/O operations.
+ */
+ info->use_dma = 1;
return 0;
}
@@ -958,7 +964,7 @@ static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info)
struct platform_device *pdev = info->pdev;
if (use_dma) {
pxa_free_dma(info->data_dma_ch);
- dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE,
+ dma_free_coherent(&pdev->dev, info->buf_size,
info->data_buff, info->data_buff_phys);
} else {
kfree(info->data_buff);
@@ -967,7 +973,7 @@ static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info)
#else
static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
{
- info->data_buff = kmalloc(MAX_BUFF_SIZE, GFP_KERNEL);
+ info->data_buff = kmalloc(info->buf_size, GFP_KERNEL);
if (info->data_buff == NULL)
return -ENOMEM;
return 0;
@@ -1081,7 +1087,16 @@ KEEP_CONFIG:
else
host->col_addr_cycles = 1;
+ /* release the initial buffer */
+ kfree(info->data_buff);
+
+ /* allocate the real data + oob buffer */
+ info->buf_size = mtd->writesize + mtd->oobsize;
+ ret = pxa3xx_nand_init_buff(info);
+ if (ret)
+ return ret;
info->oob_buff = info->data_buff + mtd->writesize;
+
if ((mtd->size >> chip->page_shift) > 65536)
host->row_addr_cycles = 3;
else
@@ -1187,15 +1202,18 @@ static int alloc_nand_resource(struct platform_device *pdev)
}
info->mmio_phys = r->start;
- ret = pxa3xx_nand_init_buff(info);
- if (ret)
+ /* Allocate a buffer to allow flash detection */
+ info->buf_size = INIT_BUFFER_SIZE;
+ info->data_buff = kmalloc(info->buf_size, GFP_KERNEL);
+ if (info->data_buff == NULL) {
+ ret = -ENOMEM;
goto fail_disable_clk;
+ }
/* initialize all interrupts to be disabled */
disable_int(info, NDSR_MASK);
- ret = request_irq(irq, pxa3xx_nand_irq, IRQF_DISABLED,
- pdev->name, info);
+ ret = request_irq(irq, pxa3xx_nand_irq, 0, pdev->name, info);
if (ret < 0) {
dev_err(&pdev->dev, "failed to request IRQ\n");
goto fail_free_buf;
@@ -1207,7 +1225,7 @@ static int alloc_nand_resource(struct platform_device *pdev)
fail_free_buf:
free_irq(irq, info);
- pxa3xx_nand_free_buff(info);
+ kfree(info->data_buff);
fail_disable_clk:
clk_disable_unprepare(info->clk);
return ret;
@@ -1412,7 +1430,7 @@ static int pxa3xx_nand_resume(struct platform_device *pdev)
static struct platform_driver pxa3xx_nand_driver = {
.driver = {
.name = "pxa3xx-nand",
- .of_match_table = of_match_ptr(pxa3xx_nand_dt_ids),
+ .of_match_table = pxa3xx_nand_dt_ids,
},
.probe = pxa3xx_nand_probe,
.remove = pxa3xx_nand_remove,
diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c
index 49bd9155cb19..fe8058a45054 100644
--- a/drivers/mtd/nand/socrates_nand.c
+++ b/drivers/mtd/nand/socrates_nand.c
@@ -150,17 +150,13 @@ static int socrates_nand_probe(struct platform_device *ofdev)
struct mtd_part_parser_data ppdata;
/* Allocate memory for the device structure (and zero it) */
- host = kzalloc(sizeof(struct socrates_nand_host), GFP_KERNEL);
- if (!host) {
- printk(KERN_ERR
- "socrates_nand: failed to allocate device structure.\n");
+ host = devm_kzalloc(&ofdev->dev, sizeof(*host), GFP_KERNEL);
+ if (!host)
return -ENOMEM;
- }
host->io_base = of_iomap(ofdev->dev.of_node, 0);
if (host->io_base == NULL) {
- printk(KERN_ERR "socrates_nand: ioremap failed\n");
- kfree(host);
+ dev_err(&ofdev->dev, "ioremap failed\n");
return -EIO;
}
@@ -212,9 +208,7 @@ static int socrates_nand_probe(struct platform_device *ofdev)
nand_release(mtd);
out:
- dev_set_drvdata(&ofdev->dev, NULL);
iounmap(host->io_base);
- kfree(host);
return res;
}
@@ -228,9 +222,7 @@ static int socrates_nand_remove(struct platform_device *ofdev)
nand_release(mtd);
- dev_set_drvdata(&ofdev->dev, NULL);
iounmap(host->io_base);
- kfree(host);
return 0;
}
diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
index 396530d87ecf..a3747c914d57 100644
--- a/drivers/mtd/nand/tmio_nand.c
+++ b/drivers/mtd/nand/tmio_nand.c
@@ -428,8 +428,7 @@ static int tmio_probe(struct platform_device *dev)
/* 15 us command delay time */
nand_chip->chip_delay = 15;
- retval = request_irq(irq, &tmio_irq,
- IRQF_DISABLED, dev_name(&dev->dev), tmio);
+ retval = request_irq(irq, &tmio_irq, 0, dev_name(&dev->dev), tmio);
if (retval) {
dev_err(&dev->dev, "request_irq error %d\n", retval);
goto err_irq;
diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c
index c5f4ebf4b384..46f27de018c3 100644
--- a/drivers/mtd/nftlcore.c
+++ b/drivers/mtd/nftlcore.c
@@ -50,7 +50,7 @@ static void nftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
struct NFTLrecord *nftl;
unsigned long temp;
- if (mtd->type != MTD_NANDFLASH || mtd->size > UINT_MAX)
+ if (!mtd_type_is_nand(mtd) || mtd->size > UINT_MAX)
return;
/* OK, this is moderately ugly. But probably safe. Alternatives? */
if (memcmp(mtd->name, "DiskOnChip", 10))
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 558071bf92de..2362909d20c0 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -573,28 +573,6 @@ static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
static struct platform_driver omap2_onenand_driver;
-static int __adjust_timing(struct device *dev, void *data)
-{
- int ret = 0;
- struct omap2_onenand *c;
-
- c = dev_get_drvdata(dev);
-
- BUG_ON(c->setup == NULL);
-
- /* DMA is not in use so this is all that is needed */
- /* Revisit for OMAP3! */
- ret = c->setup(c->onenand.base, &c->freq);
-
- return ret;
-}
-
-int omap2_onenand_rephase(void)
-{
- return driver_for_each_device(&omap2_onenand_driver.driver, NULL,
- NULL, __adjust_timing);
-}
-
static void omap2_onenand_shutdown(struct platform_device *pdev)
{
struct omap2_onenand *c = dev_get_drvdata(&pdev->dev);
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index b3f41f200622..1de33b5d3903 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -2556,10 +2556,6 @@ static int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs)
{
int ret;
- /* Check for invalid offset */
- if (ofs > mtd->size)
- return -EINVAL;
-
onenand_get_device(mtd, FL_READING);
ret = onenand_block_isbad_nolock(mtd, ofs, 0);
onenand_release_device(mtd);
@@ -3529,7 +3525,7 @@ static int flexonenand_get_boundary(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
unsigned die, bdry;
- int ret, syscfg, locked;
+ int syscfg, locked;
/* Disable ECC */
syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
@@ -3540,7 +3536,7 @@ static int flexonenand_get_boundary(struct mtd_info *mtd)
this->wait(mtd, FL_SYNCING);
this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0);
- ret = this->wait(mtd, FL_READING);
+ this->wait(mtd, FL_READING);
bdry = this->read_word(this->base + ONENAND_DATARAM);
if ((bdry >> FLEXONENAND_PI_UNLOCK_SHIFT) == 3)
@@ -3550,7 +3546,7 @@ static int flexonenand_get_boundary(struct mtd_info *mtd)
this->boundary[die] = bdry & FLEXONENAND_PI_MASK;
this->command(mtd, ONENAND_CMD_RESET, 0, 0);
- ret = this->wait(mtd, FL_RESETING);
+ this->wait(mtd, FL_RESETING);
printk(KERN_INFO "Die %d boundary: %d%s\n", die,
this->boundary[die], locked ? "(Locked)" : "(Unlocked)");
@@ -3734,7 +3730,7 @@ static int flexonenand_set_boundary(struct mtd_info *mtd, int die,
/* Check is boundary is locked */
this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0);
- ret = this->wait(mtd, FL_READING);
+ this->wait(mtd, FL_READING);
thisboundary = this->read_word(this->base + ONENAND_DATARAM);
if ((thisboundary >> FLEXONENAND_PI_UNLOCK_SHIFT) != 3) {
@@ -3835,7 +3831,7 @@ static int onenand_chip_probe(struct mtd_info *mtd)
static int onenand_probe(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
- int maf_id, dev_id, ver_id;
+ int dev_id, ver_id;
int density;
int ret;
@@ -3843,8 +3839,7 @@ static int onenand_probe(struct mtd_info *mtd)
if (ret)
return ret;
- /* Read manufacturer and device IDs from Register */
- maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
+ /* Device and version IDs from Register */
dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY);
diff --git a/drivers/mtd/ssfdc.c b/drivers/mtd/ssfdc.c
index ab2a52a039c3..daf82ba7aba0 100644
--- a/drivers/mtd/ssfdc.c
+++ b/drivers/mtd/ssfdc.c
@@ -290,7 +290,7 @@ static void ssfdcr_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
int cis_sector;
/* Check for small page NAND flash */
- if (mtd->type != MTD_NANDFLASH || mtd->oobsize != OOB_SIZE ||
+ if (!mtd_type_is_nand(mtd) || mtd->oobsize != OOB_SIZE ||
mtd->size > UINT_MAX)
return;
diff --git a/drivers/mtd/tests/nandbiterrs.c b/drivers/mtd/tests/nandbiterrs.c
index 3cd3aabbe1cd..6f976159611f 100644
--- a/drivers/mtd/tests/nandbiterrs.c
+++ b/drivers/mtd/tests/nandbiterrs.c
@@ -349,7 +349,7 @@ static int __init mtd_nandbiterrs_init(void)
goto exit_mtddev;
}
- if (mtd->type != MTD_NANDFLASH) {
+ if (!mtd_type_is_nand(mtd)) {
pr_info("this test requires NAND flash\n");
err = -ENODEV;
goto exit_nand;
diff --git a/drivers/mtd/tests/oobtest.c b/drivers/mtd/tests/oobtest.c
index ff35c465bfee..2e9e2d11f204 100644
--- a/drivers/mtd/tests/oobtest.c
+++ b/drivers/mtd/tests/oobtest.c
@@ -289,7 +289,7 @@ static int __init mtd_oobtest_init(void)
return err;
}
- if (mtd->type != MTD_NANDFLASH) {
+ if (!mtd_type_is_nand(mtd)) {
pr_info("this test requires NAND flash\n");
goto out;
}
diff --git a/drivers/mtd/tests/pagetest.c b/drivers/mtd/tests/pagetest.c
index 44b96e999ad4..ed2d3f656fd2 100644
--- a/drivers/mtd/tests/pagetest.c
+++ b/drivers/mtd/tests/pagetest.c
@@ -353,7 +353,7 @@ static int __init mtd_pagetest_init(void)
return err;
}
- if (mtd->type != MTD_NANDFLASH) {
+ if (!mtd_type_is_nand(mtd)) {
pr_info("this test requires NAND flash\n");
goto out;
}
diff --git a/drivers/mtd/tests/subpagetest.c b/drivers/mtd/tests/subpagetest.c
index e2c0adf24cfc..a876371ad410 100644
--- a/drivers/mtd/tests/subpagetest.c
+++ b/drivers/mtd/tests/subpagetest.c
@@ -299,7 +299,7 @@ static int __init mtd_subpagetest_init(void)
return err;
}
- if (mtd->type != MTD_NANDFLASH) {
+ if (!mtd_type_is_nand(mtd)) {
pr_info("this test requires NAND flash\n");
goto out;
}
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 315dcc6ec1f5..e05dc6298c1d 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -41,6 +41,7 @@
#include <linux/kthread.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/major.h>
#include "ubi.h"
/* Maximum length of the 'mtd=' parameter */
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index fe3c0527545f..09b3ed455724 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -515,6 +515,10 @@ int jffs2_do_fill_super(struct super_block *sb, void *data, int silent)
c = JFFS2_SB_INFO(sb);
+ /* Do not support the MLC nand */
+ if (c->mtd->type == MTD_MLCNANDFLASH)
+ return -EINVAL;
+
#ifndef CONFIG_JFFS2_FS_WRITEBUFFER
if (c->mtd->type == MTD_NANDFLASH) {
pr_err("Cannot operate on NAND flash unless jffs2 NAND support is compiled in\n");
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
index 95fc482cef36..36bb6a503f19 100644
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -91,8 +91,6 @@ struct nand_bbt_descr {
* with NAND_BBT_CREATE.
*/
#define NAND_BBT_CREATE_EMPTY 0x00000400
-/* Search good / bad pattern through all pages of a block */
-#define NAND_BBT_SCANALLPAGES 0x00000800
/* Write bbt if neccecary */
#define NAND_BBT_WRITE 0x00002000
/* Read and write back block contents when writing bbt */
diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h
index 4b02512e421c..5f487d776411 100644
--- a/include/linux/mtd/map.h
+++ b/include/linux/mtd/map.h
@@ -365,7 +365,7 @@ static inline map_word map_word_load_partial(struct map_info *map, map_word orig
bitpos = (map_bankwidth(map)-1-i)*8;
#endif
orig.x[0] &= ~(0xff << bitpos);
- orig.x[0] |= buf[i-start] << bitpos;
+ orig.x[0] |= (unsigned long)buf[i-start] << bitpos;
}
}
return orig;
@@ -384,7 +384,7 @@ static inline map_word map_word_ff(struct map_info *map)
if (map_bankwidth(map) < MAP_FF_LIMIT) {
int bw = 8 * map_bankwidth(map);
- r.x[0] = (1 << bw) - 1;
+ r.x[0] = (1UL << bw) - 1;
} else {
for (i=0; i<map_words(map); i++)
r.x[i] = ~0UL;
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index f9bfe526d310..8cc0e2fb6894 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -29,9 +29,6 @@
#include <asm/div64.h>
-#define MTD_CHAR_MAJOR 90
-#define MTD_BLOCK_MAJOR 31
-
#define MTD_ERASE_PENDING 0x01
#define MTD_ERASING 0x02
#define MTD_ERASE_SUSPEND 0x04
@@ -354,6 +351,11 @@ static inline int mtd_has_oob(const struct mtd_info *mtd)
return mtd->_read_oob && mtd->_write_oob;
}
+static inline int mtd_type_is_nand(const struct mtd_info *mtd)
+{
+ return mtd->type == MTD_NANDFLASH || mtd->type == MTD_MLCNANDFLASH;
+}
+
static inline int mtd_can_have_bb(const struct mtd_info *mtd)
{
return !!mtd->_block_isbad;
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index ac8e89d5a792..9e6c8f9f306e 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -198,6 +198,7 @@ typedef enum {
/* Cell info constants */
#define NAND_CI_CHIPNR_MSK 0x03
#define NAND_CI_CELLTYPE_MSK 0x0C
+#define NAND_CI_CELLTYPE_SHIFT 2
/* Keep gcc happy */
struct nand_chip;
@@ -477,7 +478,7 @@ struct nand_buffers {
* @badblockbits: [INTERN] minimum number of set bits in a good block's
* bad block marker position; i.e., BBM == 11110111b is
* not bad when badblockbits == 7
- * @cellinfo: [INTERN] MLC/multichip data from chip ident
+ * @bits_per_cell: [INTERN] number of bits per cell. i.e., 1 means SLC.
* @ecc_strength_ds: [INTERN] ECC correctability from the datasheet.
* Minimum amount of bit errors per @ecc_step_ds guaranteed
* to be correctable. If unknown, set to zero.
@@ -498,7 +499,6 @@ struct nand_buffers {
* supported, 0 otherwise.
* @onfi_set_features: [REPLACEABLE] set the features for ONFI nand
* @onfi_get_features: [REPLACEABLE] get the features for ONFI nand
- * @ecclayout: [REPLACEABLE] the default ECC placement scheme
* @bbt: [INTERN] bad block table pointer
* @bbt_td: [REPLACEABLE] bad block table descriptor for flash
* lookup.
@@ -559,7 +559,7 @@ struct nand_chip {
int pagebuf;
unsigned int pagebuf_bitflips;
int subpagesize;
- uint8_t cellinfo;
+ uint8_t bits_per_cell;
uint16_t ecc_strength_ds;
uint16_t ecc_step_ds;
int badblockpos;
@@ -572,7 +572,6 @@ struct nand_chip {
uint8_t *oob_poi;
struct nand_hw_control *controller;
- struct nand_ecclayout *ecclayout;
struct nand_ecc_ctrl ecc;
struct nand_buffers *buffers;
@@ -797,4 +796,13 @@ static inline int onfi_get_sync_timing_mode(struct nand_chip *chip)
return le16_to_cpu(chip->onfi_params.src_sync_timing_mode);
}
+/*
+ * Check if it is a SLC nand.
+ * The !nand_is_slc() can be used to check the MLC/TLC nand chips.
+ * We do not distinguish the MLC and TLC now.
+ */
+static inline bool nand_is_slc(struct nand_chip *chip)
+{
+ return chip->bits_per_cell == 1;
+}
#endif /* __LINUX_MTD_NAND_H */
diff --git a/include/linux/of_mtd.h b/include/linux/of_mtd.h
index ed7f267e6389..6f10e938ff7e 100644
--- a/include/linux/of_mtd.h
+++ b/include/linux/of_mtd.h
@@ -10,10 +10,29 @@
#define __LINUX_OF_NET_H
#ifdef CONFIG_OF_MTD
+
#include <linux/of.h>
int of_get_nand_ecc_mode(struct device_node *np);
int of_get_nand_bus_width(struct device_node *np);
bool of_get_nand_on_flash_bbt(struct device_node *np);
-#endif
+
+#else /* CONFIG_OF_MTD */
+
+static inline int of_get_nand_ecc_mode(struct device_node *np)
+{
+ return -ENOSYS;
+}
+
+static inline int of_get_nand_bus_width(struct device_node *np)
+{
+ return -ENOSYS;
+}
+
+static inline bool of_get_nand_on_flash_bbt(struct device_node *np)
+{
+ return false;
+}
+
+#endif /* CONFIG_OF_MTD */
#endif /* __LINUX_OF_MTD_H */
diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
index 6bf9ef43ddb1..4da5bfa2147f 100644
--- a/include/linux/platform_data/mtd-nand-omap2.h
+++ b/include/linux/platform_data/mtd-nand-omap2.h
@@ -23,13 +23,16 @@ enum nand_io {
};
enum omap_ecc {
- /* 1-bit ecc: stored at end of spare area */
- OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
- OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
- /* 1-bit ecc: stored at beginning of spare area as romcode */
- OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
- OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */
- OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */
+ /* 1-bit ECC calculation by GPMC, Error detection by Software */
+ OMAP_ECC_HAM1_CODE_HW = 0,
+ /* 4-bit ECC calculation by GPMC, Error detection by Software */
+ OMAP_ECC_BCH4_CODE_HW_DETECTION_SW,
+ /* 4-bit ECC calculation by GPMC, Error detection by ELM */
+ OMAP_ECC_BCH4_CODE_HW,
+ /* 8-bit ECC calculation by GPMC, Error detection by Software */
+ OMAP_ECC_BCH8_CODE_HW_DETECTION_SW,
+ /* 8-bit ECC calculation by GPMC, Error detection by ELM */
+ OMAP_ECC_BCH8_CODE_HW,
};
struct gpmc_nand_regs {
@@ -63,5 +66,6 @@ struct omap_nand_platform_data {
/* for passing the partitions */
struct device_node *of_node;
+ struct device_node *elm_of_node;
};
#endif
diff --git a/include/uapi/linux/major.h b/include/uapi/linux/major.h
index 6a8ca98c9a96..620252e69b44 100644
--- a/include/uapi/linux/major.h
+++ b/include/uapi/linux/major.h
@@ -54,6 +54,7 @@
#define ACSI_MAJOR 28
#define AZTECH_CDROM_MAJOR 29
#define FB_MAJOR 29 /* /dev/fb* framebuffers */
+#define MTD_BLOCK_MAJOR 31
#define CM206_CDROM_MAJOR 32
#define IDE2_MAJOR 33
#define IDE3_MAJOR 34
@@ -105,6 +106,7 @@
#define IDE6_MAJOR 88
#define IDE7_MAJOR 89
#define IDE8_MAJOR 90
+#define MTD_CHAR_MAJOR 90
#define IDE9_MAJOR 91
#define DASD_MAJOR 94
diff --git a/include/uapi/mtd/mtd-abi.h b/include/uapi/mtd/mtd-abi.h
index 36eace03b2ac..e272ea060e38 100644
--- a/include/uapi/mtd/mtd-abi.h
+++ b/include/uapi/mtd/mtd-abi.h
@@ -94,10 +94,10 @@ struct mtd_write_req {
#define MTD_RAM 1
#define MTD_ROM 2
#define MTD_NORFLASH 3
-#define MTD_NANDFLASH 4
+#define MTD_NANDFLASH 4 /* SLC NAND */
#define MTD_DATAFLASH 6
#define MTD_UBIVOLUME 7
-#define MTD_MLCNANDFLASH 8
+#define MTD_MLCNANDFLASH 8 /* MLC NAND (including TLC) */
#define MTD_WRITEABLE 0x400 /* Device is writeable */
#define MTD_BIT_WRITEABLE 0x800 /* Single bits can be flipped */
@@ -275,4 +275,9 @@ enum mtd_file_modes {
MTD_FILE_MODE_RAW,
};
+static inline int mtd_type_is_nand_user(const struct mtd_info_user *mtd)
+{
+ return mtd->type == MTD_NANDFLASH || mtd->type == MTD_MLCNANDFLASH;
+}
+
#endif /* __MTD_ABI_H__ */