dts: Fix misspelling of Synopsysdevicetree-fixes

s/Synopsis/Synopsys
s/synopsis/synopsys

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Cc: Pavel Machek <pavel@denx.de>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Olof Johansson <olof@lixom.net>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Seungwon Jeon <tgih.jun@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>

1 files changed, 0 insertions, 107 deletions

diff --git a/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt
deleted file mode 100644
index cdcebea9c6f5..000000000000
--- a/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-* Synopsis Designware Mobile Storage Host Controller
-
-The Synopsis designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core mmc properties described by mmc.txt and the
-properties used by the Synopsis Designware Mobile Storage Host Controller.
-
-Required Properties:
-
-* compatible: should be
-	- snps,dw-mshc: for controllers compliant with synopsis dw-mshc.
-* #address-cells: should be 1.
-* #size-cells: should be 0.
-
-# Slots: The slot specific information are contained within child-nodes with
-  each child-node representing a supported slot. There should be atleast one
-  child node representing a card slot. The name of the child node representing
-  the slot is recommended to be slot@n where n is the unique number of the slot
-  connnected to the controller. The following are optional properties which
-  can be included in the slot child node.
-
-	* reg: specifies the physical slot number. The valid values of this
-	  property is 0 to (num-slots -1), where num-slots is the value
-	  specified by the num-slots property.
-
-	* bus-width: as documented in mmc core bindings.
-
-	* wp-gpios: specifies the write protect gpio line. The format of the
-	  gpio specifier depends on the gpio controller. If a GPIO is not used
-	  for write-protect, this property is optional.
-
-	* disable-wp: If the wp-gpios property isn't present then (by default)
-	  we'd assume that the write protect is hooked up directly to the
-	  controller's special purpose write protect line (accessible via
-	  the WRTPRT register).  However, it's possible that we simply don't
-	  want write protect.  In that case specify 'disable-wp'.
-	  NOTE: This property is not required for slots known to always
-	  connect to eMMC or SDIO cards.
-
-Optional properties:
-
-* clocks: from common clock binding: handle to biu and ciu clocks for the
-  bus interface unit clock and the card interface unit clock.
-
-* clock-names: from common clock binding: Shall be "biu" and "ciu".
-  If the biu clock is missing we'll simply skip enabling it.  If the
-  ciu clock is missing we'll just assume that the clock is running at
-  clock-frequency.  It is an error to omit both the ciu clock and the
-  clock-frequency.
-
-* clock-frequency: should be the frequency (in Hz) of the ciu clock.  If this
-  is specified and the ciu clock is specified then we'll try to set the ciu
-  clock to this at probe time.
-
-* num-slots: specifies the number of slots supported by the controller.
-  The number of physical slots actually used could be equal or less than the
-  value specified by num-slots. If this property is not specified, the value
-  of num-slot property is assumed to be 1.
-
-* fifo-depth: The maximum size of the tx/rx fifo's. If this property is not
-  specified, the default value of the fifo size is determined from the
-  controller registers.
-
-* card-detect-delay: Delay in milli-seconds before detecting card after card
-  insert event. The default value is 0.
-
-* supports-highspeed: Enables support for high speed cards (up to 50MHz)
-
-* broken-cd: as documented in mmc core bindings.
-
-* vmmc-supply: The phandle to the regulator to use for vmmc.  If this is
-  specified we'll defer probe until we can find this regulator.
-
-Aliases:
-
-- All the MSHC controller nodes should be represented in the aliases node using
-  the following format 'mshc{n}' where n is a unique number for the alias.
-
-Example:
-
-The MSHC controller node can be split into two portions, SoC specific and
-board specific portions as listed below.
-
-	dwmmc0@12200000 {
-		compatible = "snps,dw-mshc";
-		clocks = <&clock 351>, <&clock 132>;
-		clock-names = "biu", "ciu";
-		reg = <0x12200000 0x1000>;
-		interrupts = <0 75 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	dwmmc0@12200000 {
-		clock-frequency = <400000000>;
-		num-slots = <1>;
-		supports-highspeed;
-		broken-cd;
-		fifo-depth = <0x80>;
-		card-detect-delay = <200>;
-		vmmc-supply = <&buck8>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
-	};