summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-10-25 13:25:22 +0200
committerLinus Torvalds <torvalds@linux-foundation.org>2011-10-25 13:25:22 +0200
commit8a9ea3237e7eb5c25f09e429ad242ae5a3d5ea22 (patch)
treea0a63398a9983667d52cbbbf4e2405b4f22b1d83 /Documentation/devicetree
parent1be025d3cb40cd295123af2c394f7229ef9b30ca (diff)
parent8b3408f8ee994973869d8ba32c5bf482bc4ddca4 (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits) dp83640: free packet queues on remove dp83640: use proper function to free transmit time stamping packets ipv6: Do not use routes from locally generated RAs |PATCH net-next] tg3: add tx_dropped counter be2net: don't create multiple RX/TX rings in multi channel mode be2net: don't create multiple TXQs in BE2 be2net: refactor VF setup/teardown code into be_vf_setup/clear() be2net: add vlan/rx-mode/flow-control config to be_setup() net_sched: cls_flow: use skb_header_pointer() ipv4: avoid useless call of the function check_peer_pmtu TCP: remove TCP_DEBUG net: Fix driver name for mdio-gpio.c ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces ipv4: fix ipsec forward performance regression jme: fix irq storm after suspend/resume route: fix ICMP redirect validation net: hold sock reference while processing tx timestamps tcp: md5: add more const attributes Add ethtool -g support to virtio_net ... Fix up conflicts in: - drivers/net/Kconfig: The split-up generated a trivial conflict with removal of a stale reference to Documentation/networking/net-modules.txt. Remove it from the new location instead. - fs/sysfs/dir.c: Fairly nasty conflicts with the sysfs rb-tree usage, conflicting with Eric Biederman's changes for tagged directories.
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/net/can/fsl-flexcan.txt63
-rw-r--r--Documentation/devicetree/bindings/net/smsc911x.txt38
2 files changed, 51 insertions, 50 deletions
diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
index 1a729f089866..1ad80d5865a9 100644
--- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
+++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
@@ -1,61 +1,24 @@
-CAN Device Tree Bindings
-------------------------
-2011 Freescale Semiconductor, Inc.
+Flexcan CAN contoller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
-fsl,flexcan-v1.0 nodes
------------------------
-In addition to the required compatible-, reg- and interrupt-properties, you can
-also specify which clock source shall be used for the controller.
+Required properties:
-CPI Clock- Can Protocol Interface Clock
- This CLK_SRC bit of CTRL(control register) selects the clock source to
- the CAN Protocol Interface(CPI) to be either the peripheral clock
- (driven by the PLL) or the crystal oscillator clock. The selected clock
- is the one fed to the prescaler to generate the Serial Clock (Sclock).
- The PRESDIV field of CTRL(control register) controls a prescaler that
- generates the Serial Clock (Sclock), whose period defines the
- time quantum used to compose the CAN waveform.
+- compatible : Should be "fsl,<processor>-flexcan"
-Can Engine Clock Source
- There are two sources for CAN clock
- - Platform Clock It represents the bus clock
- - Oscillator Clock
+ An implementation should also claim any of the following compatibles
+ that it is fully backwards compatible with:
- Peripheral Clock (PLL)
- --------------
- |
- --------- -------------
- | |CPI Clock | Prescaler | Sclock
- | |---------------->| (1.. 256) |------------>
- --------- -------------
- | |
- -------------- ---------------------CLK_SRC
- Oscillator Clock
+ - fsl,p1010-flexcan
-- fsl,flexcan-clock-source : CAN Engine Clock Source.This property selects
- the peripheral clock. PLL clock is fed to the
- prescaler to generate the Serial Clock (Sclock).
- Valid values are "oscillator" and "platform"
- "oscillator": CAN engine clock source is oscillator clock.
- "platform" The CAN engine clock source is the bus clock
- (platform clock).
+- reg : Offset and length of the register set for this device
+- interrupts : Interrupt tuple for this device
+- clock-frequency : The oscillator frequency driving the flexcan device
-- fsl,flexcan-clock-divider : for the reference and system clock, an additional
- clock divider can be specified.
-- clock-frequency: frequency required to calculate the bitrate for FlexCAN.
+Example:
-Note:
- - v1.0 of flexcan-v1.0 represent the IP block version for P1010 SOC.
- - P1010 does not have oscillator as the Clock Source.So the default
- Clock Source is platform clock.
-Examples:
-
- can0@1c000 {
- compatible = "fsl,flexcan-v1.0";
+ can@1c000 {
+ compatible = "fsl,p1010-flexcan";
reg = <0x1c000 0x1000>;
interrupts = <48 0x2>;
interrupt-parent = <&mpic>;
- fsl,flexcan-clock-source = "platform";
- fsl,flexcan-clock-divider = <2>;
- clock-frequency = <fixed by u-boot>;
+ clock-frequency = <200000000>; // filled in by bootloader
};
diff --git a/Documentation/devicetree/bindings/net/smsc911x.txt b/Documentation/devicetree/bindings/net/smsc911x.txt
new file mode 100644
index 000000000000..adb5b5744ecd
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/smsc911x.txt
@@ -0,0 +1,38 @@
+* Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller
+
+Required properties:
+- compatible : Should be "smsc,lan<model>", "smsc,lan9115"
+- reg : Address and length of the io space for SMSC LAN
+- interrupts : Should contain SMSC LAN interrupt line
+- interrupt-parent : Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- phy-mode : String, operation mode of the PHY interface.
+ Supported values are: "mii", "gmii", "sgmii", "tbi", "rmii",
+ "rgmii", "rgmii-id", "rgmii-rxid", "rgmii-txid", "rtbi", "smii".
+
+Optional properties:
+- reg-shift : Specify the quantity to shift the register offsets by
+- reg-io-width : Specify the size (in bytes) of the IO accesses that
+ should be performed on the device. Valid value for SMSC LAN is
+ 2 or 4. If it's omitted or invalid, the size would be 2.
+- smsc,irq-active-high : Indicates the IRQ polarity is active-high
+- smsc,irq-push-pull : Indicates the IRQ type is push-pull
+- smsc,force-internal-phy : Forces SMSC LAN controller to use
+ internal PHY
+- smsc,force-external-phy : Forces SMSC LAN controller to use
+ external PHY
+- smsc,save-mac-address : Indicates that mac address needs to be saved
+ before resetting the controller
+- local-mac-address : 6 bytes, mac address
+
+Examples:
+
+lan9220@f4000000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0xf4000000 0x2000000>;
+ phy-mode = "mii";
+ interrupt-parent = <&gpio1>;
+ interrupts = <31>;
+ reg-io-width = <4>;
+ smsc,irq-push-pull;
+};