summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-09-06 09:36:28 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-09-06 09:36:28 -0700
commit2e515bf096c245ba87f20ab4b4ea20f911afaeda (patch)
tree8ce40f811092844ea9da683804db6e2afa410808 /Documentation/devicetree
parent22e04f6b4b04a8afe9af9239224591d06ba3b24d (diff)
parentf8ea61e63442c25cbe6ddee48979b444f1f2a01c (diff)
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina: "The usual trivial updates all over the tree -- mostly typo fixes and documentation updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (52 commits) doc: Documentation/cputopology.txt fix typo treewide: Convert retrun typos to return Fix comment typo for init_cma_reserved_pageblock Documentation/trace: Correcting and extending tracepoint documentation mm/hotplug: fix a typo in Documentation/memory-hotplug.txt power: Documentation: Update s2ram link doc: fix a typo in Documentation/00-INDEX Documentation/printk-formats.txt: No casts needed for u64/s64 doc: Fix typo "is is" in Documentations treewide: Fix printks with 0x%# zram: doc fixes Documentation/kmemcheck: update kmemcheck documentation doc: documentation/hwspinlock.txt fix typo PM / Hibernate: add section for resume options doc: filesystems : Fix typo in Documentations/filesystems scsi/megaraid fixed several typos in comments ppc: init_32: Fix error typo "CONFIG_START_KERNEL" treewide: Add __GFP_NOWARN to k.alloc calls with v.alloc fallbacks page_isolation: Fix a comment typo in test_pages_isolated() doc: fix a typo about irq affinity ...
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/arm/ste-u300.txt2
-rw-r--r--Documentation/devicetree/bindings/arm/vexpress-sysreg.txt4
-rw-r--r--Documentation/devicetree/bindings/c6x/dscr.txt2
-rw-r--r--Documentation/devicetree/bindings/clock/clk-exynos-audss.txt2
-rw-r--r--Documentation/devicetree/bindings/clock/st,nomadik.txt2
-rw-r--r--Documentation/devicetree/bindings/dma/atmel-dma.txt4
-rw-r--r--Documentation/devicetree/bindings/dma/fsl-imx-dma.txt2
-rw-r--r--Documentation/devicetree/bindings/dma/ste-dma40.txt4
-rw-r--r--Documentation/devicetree/bindings/mfd/cros-ec.txt2
-rw-r--r--Documentation/devicetree/bindings/net/can/atmel-can.txt2
-rw-r--r--Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt2
-rw-r--r--Documentation/devicetree/bindings/serial/rs485.txt2
12 files changed, 15 insertions, 15 deletions
diff --git a/Documentation/devicetree/bindings/arm/ste-u300.txt b/Documentation/devicetree/bindings/arm/ste-u300.txt
index 69b5ab0b5f4b..d11d80006a19 100644
--- a/Documentation/devicetree/bindings/arm/ste-u300.txt
+++ b/Documentation/devicetree/bindings/arm/ste-u300.txt
@@ -22,7 +22,7 @@ This contains the board-specific information.
- compatible: must be "stericsson,s365".
- vana15-supply: the regulator supplying the 1.5V to drive the
board.
-- syscon: a pointer to the syscon node so we can acccess the
+- syscon: a pointer to the syscon node so we can access the
syscon registers to set the board as self-powered.
Example:
diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
index 9cf3f25544c7..5580e9c4bd85 100644
--- a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
@@ -32,8 +32,8 @@ numbers - see motherboard's TRM for more details.
The node describing a config device must refer to the sysreg node via
"arm,vexpress,config-bridge" phandle (can be also defined in the node's
parent) and relies on the board topology properties - see main vexpress
-node documentation for more details. It must must also define the
-following property:
+node documentation for more details. It must also define the following
+property:
- arm,vexpress-sysreg,func : must contain two cells:
- first cell defines function number (eg. 1 for clock generator,
2 for voltage regulators etc.)
diff --git a/Documentation/devicetree/bindings/c6x/dscr.txt b/Documentation/devicetree/bindings/c6x/dscr.txt
index d847758f2b20..b0e97144cfb1 100644
--- a/Documentation/devicetree/bindings/c6x/dscr.txt
+++ b/Documentation/devicetree/bindings/c6x/dscr.txt
@@ -5,7 +5,7 @@ TI C6X SoCs contain a region of miscellaneous registers which provide various
function for SoC control or status. Details vary considerably among from SoC
to SoC with no two being alike.
-In general, the Device State Configuraion Registers (DSCR) will provide one or
+In general, the Device State Configuration Registers (DSCR) will provide one or
more configuration registers often protected by a lock register where one or
more key values must be written to a lock register in order to unlock the
configuration register for writes. These configuration register may be used to
diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
index a1201802f90d..75e2e1999f87 100644
--- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
+++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
@@ -2,7 +2,7 @@
The Samsung Audio Subsystem clock controller generates and supplies clocks
to Audio Subsystem block available in the S5PV210 and Exynos SoCs. The clock
-binding described here is applicable to all SoC's in Exynos family.
+binding described here is applicable to all SoCs in Exynos family.
Required Properties:
diff --git a/Documentation/devicetree/bindings/clock/st,nomadik.txt b/Documentation/devicetree/bindings/clock/st,nomadik.txt
index 7fc09773de46..40e0cf1f7b99 100644
--- a/Documentation/devicetree/bindings/clock/st,nomadik.txt
+++ b/Documentation/devicetree/bindings/clock/st,nomadik.txt
@@ -17,7 +17,7 @@ Optional properties for the SRC node:
- disable-mxtal: if present this will disable the MXTALO,
i.e. the driver output for the main (~19.2 MHz) chrystal,
if the board has its own circuitry for providing this
- osciallator
+ oscillator
PLL nodes: these nodes represent the two PLLs on the system,
diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt
index c280a0e6f42d..e1f343c7a34b 100644
--- a/Documentation/devicetree/bindings/dma/atmel-dma.txt
+++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt
@@ -18,14 +18,14 @@ dma0: dma@ffffec00 {
DMA clients connected to the Atmel DMA controller must use the format
described in the dma.txt file, using a three-cell specifier for each channel:
-a phandle plus two interger cells.
+a phandle plus two integer cells.
The three cells in order are:
1. A phandle pointing to the DMA controller.
2. The memory interface (16 most significant bits), the peripheral interface
(16 less significant bits).
3. Parameters for the at91 DMA configuration register which are device
-dependant:
+dependent:
- bit 7-0: peripheral identifier for the hardware handshaking interface. The
identifier can be different for tx and rx.
- bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 1 for ASAP.
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
index 2717ecb47db9..7bd8847d6394 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
@@ -34,7 +34,7 @@ Clients have to specify the DMA requests with phandles in a list.
Required properties:
- dmas: List of one or more DMA request specifiers. One DMA request specifier
consists of a phandle to the DMA controller followed by the integer
- specifiying the request line.
+ specifying the request line.
- dma-names: List of string identifiers for the DMA requests. For the correct
names, have a look at the specific client driver.
diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt
index bea5b73a7390..a8c21c256baa 100644
--- a/Documentation/devicetree/bindings/dma/ste-dma40.txt
+++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt
@@ -37,14 +37,14 @@ Each dmas request consists of 4 cells:
1. A phandle pointing to the DMA controller
2. Device Type
3. The DMA request line number (only when 'use fixed channel' is set)
- 4. A 32bit mask specifying; mode, direction and endianess [NB: This list will grow]
+ 4. A 32bit mask specifying; mode, direction and endianness [NB: This list will grow]
0x00000001: Mode:
Logical channel when unset
Physical channel when set
0x00000002: Direction:
Memory to Device when unset
Device to Memory when set
- 0x00000004: Endianess:
+ 0x00000004: Endianness:
Little endian when unset
Big endian when set
0x00000008: Use fixed channel:
diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt
index e0e59c58a1f9..5f229c5f6da9 100644
--- a/Documentation/devicetree/bindings/mfd/cros-ec.txt
+++ b/Documentation/devicetree/bindings/mfd/cros-ec.txt
@@ -4,7 +4,7 @@ Google's ChromeOS EC is a Cortex-M device which talks to the AP and
implements various function such as keyboard and battery charging.
The EC can be connect through various means (I2C, SPI, LPC) and the
-compatible string used depends on the inteface. Each connection method has
+compatible string used depends on the interface. Each connection method has
its own driver which connects to the top level interface-agnostic EC driver.
Other Linux driver (such as cros-ec-keyb for the matrix keyboard) connect to
the top-level driver.
diff --git a/Documentation/devicetree/bindings/net/can/atmel-can.txt b/Documentation/devicetree/bindings/net/can/atmel-can.txt
index 72cf0c5daff4..14e52a0d86ec 100644
--- a/Documentation/devicetree/bindings/net/can/atmel-can.txt
+++ b/Documentation/devicetree/bindings/net/can/atmel-can.txt
@@ -8,7 +8,7 @@ Required properties:
Example:
can0: can@f000c000 {
- compatbile = "atmel,at91sam9x5-can";
+ compatible = "atmel,at91sam9x5-can";
reg = <0xf000c000 0x300>;
interrupts = <40 4 5>
};
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
index 648d60eb9fd8..7ccae490ff6d 100644
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -37,7 +37,7 @@ Bank: 3 (A, B and C)
0xffffffff 0x7fff3ccf /* pioB */
0xffffffff 0x007fffff /* pioC */
-For each peripheral/bank we will descibe in a u32 if a pin can can be
+For each peripheral/bank we will descibe in a u32 if a pin can be
configured in it by putting 1 to the pin bit (1 << pin)
Let's take the pioA on peripheral B
diff --git a/Documentation/devicetree/bindings/serial/rs485.txt b/Documentation/devicetree/bindings/serial/rs485.txt
index 1e753c69fc83..32b1fa1f2a5b 100644
--- a/Documentation/devicetree/bindings/serial/rs485.txt
+++ b/Documentation/devicetree/bindings/serial/rs485.txt
@@ -7,7 +7,7 @@ UART node.
Required properties:
- rs485-rts-delay: prop-encoded-array <a b> where:
- * a is the delay beteween rts signal and beginning of data sent in milliseconds.
+ * a is the delay between rts signal and beginning of data sent in milliseconds.
it corresponds to the delay before sending data.
* b is the delay between end of data sent and rts signal in milliseconds
it corresponds to the delay after sending data and actual release of the line.