summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-11-01 21:02:35 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2011-11-01 21:02:35 -0700
commit367069f16e32e188d4687fe2c3e30f2ca583836f (patch)
tree977f87038b75e53af9d132cba2f7a2aecb2fa005 /Documentation
parent81a3c10ce8a7fd5bf9a06bfc38bd417512911831 (diff)
parentc72dbae971400e466ad9ff16c920cd6d9d8c55a1 (diff)
Merge branch 'next/dt' of git://git.linaro.org/people/arnd/arm-soc
* 'next/dt' of git://git.linaro.org/people/arnd/arm-soc: ARM: gic: use module.h instead of export.h ARM: gic: fix irq_alloc_descs handling for sparse irq ARM: gic: add OF based initialization ARM: gic: add irq_domain support irq: support domains with non-zero hwirq base of/irq: introduce of_irq_init ARM: at91: add at91sam9g20 and Calao USB A9G20 DT support ARM: at91: dt: at91sam9g45 family and board device tree files arm/mx5: add device tree support for imx51 babbage arm/mx5: add device tree support for imx53 boards ARM: msm: Add devicetree support for msm8660-surf msm_serial: Add devicetree support msm_serial: Use relative resources for iomem Fix up conflicts in arch/arm/mach-at91/{at91sam9260.c,at91sam9g45.c}
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/arm/fsl.txt19
-rw-r--r--Documentation/devicetree/bindings/arm/gic.txt55
-rw-r--r--Documentation/devicetree/bindings/tty/serial/msm_serial.txt27
3 files changed, 101 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
new file mode 100644
index 000000000000..e2401cd632ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -0,0 +1,19 @@
+i.MX51 Babbage Board
+Required root node properties:
+ - compatible = "fsl,imx51-babbage", "fsl,imx51";
+
+i.MX53 Automotive Reference Design Board
+Required root node properties:
+ - compatible = "fsl,imx53-ard", "fsl,imx53";
+
+i.MX53 Evaluation Kit
+Required root node properties:
+ - compatible = "fsl,imx53-evk", "fsl,imx53";
+
+i.MX53 Quick Start Board
+Required root node properties:
+ - compatible = "fsl,imx53-qsb", "fsl,imx53";
+
+i.MX53 Smart Mobile Reference Design Board
+Required root node properties:
+ - compatible = "fsl,imx53-smd", "fsl,imx53";
diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
new file mode 100644
index 000000000000..52916b4aa1fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -0,0 +1,55 @@
+* ARM Generic Interrupt Controller
+
+ARM SMP cores are often associated with a GIC, providing per processor
+interrupts (PPI), shared processor interrupts (SPI) and software
+generated interrupts (SGI).
+
+Primary GIC is attached directly to the CPU and typically has PPIs and SGIs.
+Secondary GICs are cascaded into the upward interrupt controller and do not
+have PPIs or SGIs.
+
+Main node required properties:
+
+- compatible : should be one of:
+ "arm,cortex-a9-gic"
+ "arm,arm11mp-gic"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The type shall be a <u32> and the value shall be 3.
+
+ The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
+ interrupts.
+
+ The 2nd cell contains the interrupt number for the interrupt type.
+ SPI interrupts are in the range [0-987]. PPI interrupts are in the
+ range [0-15].
+
+ The 3rd cell is the flags, encoded as follows:
+ bits[3:0] trigger type and level flags.
+ 1 = low-to-high edge triggered
+ 2 = high-to-low edge triggered
+ 4 = active high level-sensitive
+ 8 = active low level-sensitive
+ bits[15:8] PPI interrupt cpu mask. Each bit corresponds to each of
+ the 8 possible cpus attached to the GIC. A bit set to '1' indicated
+ the interrupt is wired to that CPU. Only valid for PPI interrupts.
+
+- reg : Specifies base physical address(s) and size of the GIC registers. The
+ first region is the GIC distributor register base and size. The 2nd region is
+ the GIC cpu interface register base and size.
+
+Optional
+- interrupts : Interrupt source of the parent interrupt controller. Only
+ present on secondary GICs.
+
+Example:
+
+ intc: interrupt-controller@fff11000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0xfff11000 0x1000>,
+ <0xfff10100 0x100>;
+ };
+
diff --git a/Documentation/devicetree/bindings/tty/serial/msm_serial.txt b/Documentation/devicetree/bindings/tty/serial/msm_serial.txt
new file mode 100644
index 000000000000..aef383eb8876
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/msm_serial.txt
@@ -0,0 +1,27 @@
+* Qualcomm MSM UART
+
+Required properties:
+- compatible :
+ - "qcom,msm-uart", and one of "qcom,msm-hsuart" or
+ "qcom,msm-lsuart".
+- reg : offset and length of the register set for the device
+ for the hsuart operating in compatible mode, there should be a
+ second pair describing the gsbi registers.
+- interrupts : should contain the uart interrupt.
+
+There are two different UART blocks used in MSM devices,
+"qcom,msm-hsuart" and "qcom,msm-lsuart". The msm-serial driver is
+able to handle both of these, and matches against the "qcom,msm-uart"
+as the compatibility.
+
+The registers for the "qcom,msm-hsuart" device need to specify both
+register blocks, even for the common driver.
+
+Example:
+
+ uart@19c400000 {
+ compatible = "qcom,msm-hsuart", "qcom,msm-uart";
+ reg = <0x19c40000 0x1000>,
+ <0x19c00000 0x1000>;
+ interrupts = <195>;
+ };