Merge tag 'v3.16-rc1' into i2c/for-next

Merge a stable base (Linux 3.16-rc1) Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
author: Wolfram Sang <wsa@the-dreams.de> 2014-06-17 14:36:41 +0200
committer: Wolfram Sang <wsa@the-dreams.de> 2014-06-17 14:37:31 +0200
commit: f0b1f6442b5090fed3529cb39f3acf8c91693d3d (patch)
tree: bc5f62b017a82161c9a7f892f464813f6efd5bf3 /Documentation
parent: 4632a93f015caf6d7db4352f37aab74a39e60d7a (diff)
parent: 7171511eaec5bf23fb06078f59784a3a0626b38f (diff)
67 files changed, 3499 insertions, 468 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-net b/Documentation/ABI/testing/sysfs-class-net
index d922060e455d..416c5d59f52e 100644
--- a/Documentation/ABI/testing/sysfs-class-net
+++ b/Documentation/ABI/testing/sysfs-class-net
@@ -169,6 +169,14 @@ Description:
 		"unknown", "notpresent", "down", "lowerlayerdown", "testing",
 		"dormant", "up".
 
+What:		/sys/class/net/<iface>/phys_port_id
+Date:		July 2013
+KernelVersion:	3.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the interface unique physical port identifier within
+		the NIC, as a string.
+
 What:		/sys/class/net/<iface>/speed
 Date:		October 2009
 KernelVersion:	2.6.33
diff --git a/Documentation/ABI/testing/sysfs-class-net-cdc_ncm b/Documentation/ABI/testing/sysfs-class-net-cdc_ncm
new file mode 100644
index 000000000000..5cedf72df358
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-cdc_ncm
@@ -0,0 +1,149 @@
+What:		/sys/class/net/<iface>/cdc_ncm/min_tx_pkt
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		The driver will pad NCM Transfer Blocks (NTBs) longer
+		than this to tx_max, allowing the device to receive
+		tx_max sized frames with no terminating short
+		packet. NTBs shorter than this limit are transmitted
+		as-is, without any padding, and are terminated with a
+		short USB packet.
+
+		Padding to tx_max allows the driver to transmit NTBs
+		back-to-back without any interleaving short USB
+		packets.  This reduces the number of short packet
+		interrupts in the device, and represents a tradeoff
+		between USB bus bandwidth and device DMA optimization.
+
+		Set to 0 to pad all frames. Set greater than tx_max to
+		disable all padding.
+
+What:		/sys/class/net/<iface>/cdc_ncm/rx_max
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		The maximum NTB size for RX.  Cannot exceed the
+		maximum value supported by the device. Must allow at
+		least one max sized datagram plus headers.
+
+		The actual limits are device dependent.  See
+		dwNtbInMaxSize.
+
+		Note: Some devices will silently ignore changes to
+		this value, resulting in oversized NTBs and
+		corresponding framing errors.
+
+What:		/sys/class/net/<iface>/cdc_ncm/tx_max
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		The maximum NTB size for TX.  Cannot exceed the
+		maximum value supported by the device.  Must allow at
+		least one max sized datagram plus headers.
+
+		The actual limits are device dependent.  See
+		dwNtbOutMaxSize.
+
+What:		/sys/class/net/<iface>/cdc_ncm/tx_timer_usecs
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Datagram aggregation timeout in µs. The driver will
+		wait up to 3 times this timeout for more datagrams to
+		aggregate before transmitting an NTB frame.
+
+		Valid range: 5 to 4000000
+
+		Set to 0 to disable aggregation.
+
+The following read-only attributes all represent fields of the
+structure defined in section 6.2.1 "GetNtbParameters" of "Universal
+Serial Bus Communications Class Subclass Specifications for Network
+Control Model Devices" (CDC NCM), Revision 1.0 (Errata 1), November
+24, 2010 from USB Implementers Forum, Inc.  The descriptions are
+quoted from table 6-3 of CDC NCM: "NTB Parameter Structure".
+
+What:		/sys/class/net/<iface>/cdc_ncm/bmNtbFormatsSupported
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Bit 0: 16-bit NTB supported (set to 1)
+		Bit 1: 32-bit NTB supported
+		Bits 2 – 15: reserved (reset to zero; must be ignored by host)
+
+What:		/sys/class/net/<iface>/cdc_ncm/dwNtbInMaxSize
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		IN NTB Maximum Size in bytes
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpInDivisor
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Divisor used for IN NTB Datagram payload alignment
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpInPayloadRemainder
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Remainder used to align input datagram payload within
+		the NTB: (Payload Offset) mod (wNdpInDivisor) =
+		wNdpInPayloadRemainder
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpInAlignment
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		NDP alignment modulus for NTBs on the IN pipe. Shall
+		be a power of 2, and shall be at least 4.
+
+What:		/sys/class/net/<iface>/cdc_ncm/dwNtbOutMaxSize
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		OUT NTB Maximum Size
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpOutDivisor
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		OUT NTB Datagram alignment modulus
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpOutPayloadRemainder
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Remainder used to align output datagram payload
+		offsets within the NTB: Padding, shall be transmitted
+		as zero by function, and ignored by host.  (Payload
+		Offset) mod (wNdpOutDivisor) = wNdpOutPayloadRemainder
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpOutAlignment
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		NDP alignment modulus for use in NTBs on the OUT
+		pipe. Shall be a power of 2, and shall be at least 4.
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNtbOutMaxDatagrams
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Maximum number of datagrams that the host may pack
+		into a single OUT NTB. Zero means that the device
+		imposes no limit.
diff --git a/Documentation/ABI/testing/sysfs-class-net-queues b/Documentation/ABI/testing/sysfs-class-net-queues
new file mode 100644
index 000000000000..5e9aeb91d355
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-queues
@@ -0,0 +1,79 @@
+What:		/sys/class/<iface>/queues/rx-<queue>/rps_cpus
+Date:		March 2010
+KernelVersion:	2.6.35
+Contact:	netdev@vger.kernel.org
+Description:
+		Mask of the CPU(s) currently enabled to participate into the
+		Receive Packet Steering packet processing flow for this
+		network device queue. Possible values depend on the number
+		of available CPU(s) in the system.
+
+What:		/sys/class/<iface>/queues/rx-<queue>/rps_flow_cnt
+Date:		April 2010
+KernelVersion:	2.6.35
+Contact:	netdev@vger.kernel.org
+Description:
+		Number of Receive Packet Steering flows being currently
+		processed by this particular network device receive queue.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/tx_timeout
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of transmit timeout events seen by this
+		network interface transmit queue.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/xps_cpus
+Date:		November 2010
+KernelVersion:	2.6.38
+Contact:	netdev@vger.kernel.org
+Description:
+		Mask of the CPU(s) currently enabled to participate into the
+		Transmit Packet Steering packet processing flow for this
+		network device transmit queue. Possible vaules depend on the
+		number of available CPU(s) in the system.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the hold time in milliseconds to measure the slack
+		of this particular network device transmit queue.
+		Default value is 1000.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of bytes (objects) in flight on this
+		network device transmit queue.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the current limit of bytes allowed to be queued
+		on this network device transmit queue. This value is clamped
+		to be within the bounds defined by limit_max and limit_min.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the absolute maximum limit of bytes allowed to be
+		queued on this network device transmit queue. See
+		include/linux/dynamic_queue_limits.h for the default value.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the absolute minimum limit of bytes allowed to be
+		queued on this network device transmit queue. Default value is
+		0.
diff --git a/Documentation/ABI/testing/sysfs-class-net-statistics b/Documentation/ABI/testing/sysfs-class-net-statistics
new file mode 100644
index 000000000000..397118de7b5e
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-statistics
@@ -0,0 +1,201 @@
+What:		/sys/class/<iface>/statistics/collisions
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of collisions seen by this network device.
+		This value might not be relevant with all MAC layers.
+
+What:		/sys/class/<iface>/statistics/multicast
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of multicast packets received by this
+		network device.
+
+What:		/sys/class/<iface>/statistics/rx_bytes
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of bytes received by this network device.
+		See the network driver for the exact meaning of when this
+		value is incremented.
+
+What:		/sys/class/<iface>/statistics/rx_compressed
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of compressed packets received by this
+		network device. This value might only be relevant for interfaces
+		that support packet compression (e.g: PPP).
+
+What:		/sys/class/<iface>/statistics/rx_crc_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets received with a CRC (FCS) error
+		by this network device. Note that the specific meaning might
+		depend on the MAC layer used by the interface.
+
+What:		/sys/class/<iface>/statistics/rx_dropped
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets received by the network device
+		but dropped, that are not forwarded to the upper layers for
+		packet processing. See the network driver for the exact
+		meaning of this value.
+
+What:		/sys/class/<iface>/statistics/rx_fifo_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of receive FIFO errors seen by this
+		network device. See the network driver for the exact
+		meaning of this value.
+
+What:		/sys/class/<iface>/statistics/rx_frame_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of received frames with error, such as
+		alignment errors. Note that the specific meaning depends on
+		on the MAC layer protocol used. See the network driver for
+		the exact meaning of this value.
+
+What:		/sys/class/<iface>/statistics/rx_length_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of received error packet with a length
+		error, oversized or undersized. See the network driver for the
+		exact meaning of this value.
+
+What:		/sys/class/<iface>/statistics/rx_missed_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of received packets that have been missed
+		due to lack of capacity in the receive side. See the network
+		driver for the exact meaning of this value.
+
+What:		/sys/class/<iface>/statistics/rx_over_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of received packets that are oversized
+		compared to what the network device is configured to accept
+		(e.g: larger than MTU). See the network driver for the exact
+		meaning of this value.
+
+What:		/sys/class/<iface>/statistics/rx_packets
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the total number of good packets received by this
+		network device.
+
+What:		/sys/class/<iface>/statistics/tx_aborted_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets that have been aborted
+		during transmission by a network device (e.g: because of
+		a medium collision). See the network driver for the exact
+		meaning of this value.
+
+What:		/sys/class/<iface>/statistics/tx_bytes
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of bytes transmitted by a network
+		device. See the network driver for the exact meaning of this
+		value, in particular whether this accounts for all successfully
+		transmitted packets or all packets that have been queued for
+		transmission.
+
+What:		/sys/class/<iface>/statistics/tx_carrier_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets that could not be transmitted
+		because of carrier errors (e.g: physical link down). See the
+		network driver for the exact meaning of this value.
+
+What:		/sys/class/<iface>/statistics/tx_compressed
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of transmitted compressed packets. Note
+		this might only be relevant for devices that support
+		compression (e.g: PPP).
+
+What:		/sys/class/<iface>/statistics/tx_dropped
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets dropped during transmission.
+		See the driver for the exact reasons as to why the packets were
+		dropped.
+
+What:		/sys/class/<iface>/statistics/tx_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets in error during transmission by
+		a network device. See the driver for the exact reasons as to
+		why the packets were dropped.
+
+What:		/sys/class/<iface>/statistics/tx_fifo_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets having caused a transmit
+		FIFO error. See the driver for the exact reasons as to why the
+		packets were dropped.
+
+What:		/sys/class/<iface>/statistics/tx_heartbeat_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets transmitted that have been
+		reported as heartbeat errors. See the driver for the exact
+		reasons as to why the packets were dropped.
+
+What:		/sys/class/<iface>/statistics/tx_packets
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets transmitted by a network
+		device. See the driver for whether this reports the number of all
+		attempted or successful transmissions.
+
+What:		/sys/class/<iface>/statistics/tx_window_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets not successfully transmitted
+		due to a window collision. The specific meaning depends on the
+		MAC layer used.  On Ethernet this is usually used to report
+		late collisions errors.
diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl
index 044b76436e83..d9b9416c989f 100644
--- a/Documentation/DocBook/80211.tmpl
+++ b/Documentation/DocBook/80211.tmpl
@@ -100,6 +100,7 @@
 !Finclude/net/cfg80211.h wdev_priv
 !Finclude/net/cfg80211.h ieee80211_iface_limit
 !Finclude/net/cfg80211.h ieee80211_iface_combination
+!Finclude/net/cfg80211.h cfg80211_check_combinations
       </chapter>
       <chapter>
       <title>Actions and configuration</title>
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index ba60d93c1855..7df3134ebc0e 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -142,6 +142,12 @@
       to register it with the DRM subsystem.
     </para>
     <para>
+      Newer drivers that no longer require a <structname>drm_bus</structname>
+      structure can alternatively use the low-level device initialization and
+      registration functions such as <function>drm_dev_alloc()</function> and
+      <function>drm_dev_register()</function> directly.
+    </para>
+    <para>
       The <structname>drm_driver</structname> structure contains static
       information that describes the driver and features it supports, and
       pointers to methods that the DRM core will call to implement the DRM API.
@@ -282,6 +288,36 @@ char *date;</synopsis>
       </sect3>
     </sect2>
     <sect2>
+      <title>Device Registration</title>
+      <para>
+        A number of functions are provided to help with device registration.
+        The functions deal with PCI, USB and platform devices, respectively.
+      </para>
+!Edrivers/gpu/drm/drm_pci.c
+!Edrivers/gpu/drm/drm_usb.c
+!Edrivers/gpu/drm/drm_platform.c
+      <para>
+        New drivers that no longer rely on the services provided by the
+        <structname>drm_bus</structname> structure can call the low-level
+        device registration functions directly. The
+        <function>drm_dev_alloc()</function> function can be used to allocate
+        and initialize a new <structname>drm_device</structname> structure.
+        Drivers will typically want to perform some additional setup on this
+        structure, such as allocating driver-specific data and storing a
+        pointer to it in the DRM device's <structfield>dev_private</structfield>
+        field. Drivers should also set the device's unique name using the
+        <function>drm_dev_set_unique()</function> function. After it has been
+        set up a device can be registered with the DRM subsystem by calling
+        <function>drm_dev_register()</function>. This will cause the device to
+        be exposed to userspace and will call the driver's
+        <structfield>.load()</structfield> implementation. When a device is
+        removed, the DRM device can safely be unregistered and freed by calling
+        <function>drm_dev_unregister()</function> followed by a call to
+        <function>drm_dev_unref()</function>.
+      </para>
+!Edrivers/gpu/drm/drm_stub.c
+    </sect2>
+    <sect2>
       <title>Driver Load</title>
       <para>
         The <methodname>load</methodname> method is the driver and device
@@ -342,21 +378,13 @@ char *date;</synopsis>
         <sect4>
           <title>Managed IRQ Registration</title>
           <para>
-            Both the <function>drm_irq_install</function> and
-	    <function>drm_irq_uninstall</function> functions get the device IRQ by
-	    calling <function>drm_dev_to_irq</function>. This inline function will
-	    call a bus-specific operation to retrieve the IRQ number. For platform
-	    devices, <function>platform_get_irq</function>(..., 0) is used to
-	    retrieve the IRQ number.
-          </para>
-          <para>
             <function>drm_irq_install</function> starts by calling the
             <methodname>irq_preinstall</methodname> driver operation. The operation
             is optional and must make sure that the interrupt will not get fired by
             clearing all pending interrupt flags or disabling the interrupt.
           </para>
           <para>
-            The IRQ will then be requested by a call to
+            The passed-in IRQ will then be requested by a call to
             <function>request_irq</function>. If the DRIVER_IRQ_SHARED driver
             feature flag is set, a shared (IRQF_SHARED) IRQ handler will be
             requested.
@@ -1799,6 +1827,12 @@ void intel_crt_init(struct drm_device *dev)
       <title>KMS API Functions</title>
 !Edrivers/gpu/drm/drm_crtc.c
     </sect2>
+    <sect2>
+      <title>KMS Locking</title>
+!Pdrivers/gpu/drm/drm_modeset_lock.c kms locking
+!Iinclude/drm/drm_modeset_lock.h
+!Edrivers/gpu/drm/drm_modeset_lock.c
+    </sect2>
   </sect1>
 
   <!-- Internals: kms helper functions -->
@@ -1903,8 +1937,8 @@ void intel_crt_init(struct drm_device *dev)
           <para>
             The function filters out modes larger than
             <parameter>max_width</parameter> and <parameter>max_height</parameter>
-            if specified. It then calls the connector
-            <methodname>mode_valid</methodname> helper operation for  each mode in
+            if specified. It then calls the optional connector
+            <methodname>mode_valid</methodname> helper operation for each mode in
             the probed list to check whether the mode is valid for the connector.
           </para>
         </listitem>
@@ -2265,7 +2299,7 @@ void intel_crt_init(struct drm_device *dev)
           <para>
             Verify whether a mode is valid for the connector. Return MODE_OK for
             supported modes and one of the enum drm_mode_status values (MODE_*)
-            for unsupported modes. This operation is mandatory.
+            for unsupported modes. This operation is optional.
           </para>
           <para>
             As the mode rejection reason is currently not used beside for
@@ -2450,6 +2484,863 @@ void intel_crt_init(struct drm_device *dev)
       pointer to the target object, a pointer to the previously created property
       and an initial instance value.
     </para>
+    <sect2>
+	<title>Existing KMS Properties</title>
+	<para>
+	The following table gives description of drm properties exposed by various
+	modules/drivers.
+	</para>
+	<table border="1" cellpadding="0" cellspacing="0">
+	<tbody>
+	<tr style="font-weight: bold;">
+	<td valign="top" >Owner Module/Drivers</td>
+	<td valign="top" >Group</td>
+	<td valign="top" >Property Name</td>
+	<td valign="top" >Type</td>
+	<td valign="top" >Property Values</td>
+	<td valign="top" >Object attached</td>
+	<td valign="top" >Description/Restrictions</td>
+	</tr>
+	<tr>
+	<td rowspan="20" valign="top" >DRM</td>
+	<td rowspan="2" valign="top" >Generic</td>
+	<td valign="top" >“EDID”</td>
+	<td valign="top" >BLOB | IMMUTABLE</td>
+	<td valign="top" >0</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >Contains id of edid blob ptr object.</td>
+	</tr>
+	<tr>
+	<td valign="top" >“DPMS”</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ “On”, “Standby”, “Suspend”, “Off” }</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >Contains DPMS operation mode value.</td>
+	</tr>
+	<tr>
+	<td rowspan="1" valign="top" >Plane</td>
+	<td valign="top" >“type”</td>
+	<td valign="top" >ENUM | IMMUTABLE</td>
+	<td valign="top" >{ "Overlay", "Primary", "Cursor" }</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >Plane type</td>
+	</tr>
+	<tr>
+	<td rowspan="2" valign="top" >DVI-I</td>
+	<td valign="top" >“subconnector”</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ “Unknown”, “DVI-D”, “DVI-A” }</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“select subconnector”</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ “Automatic”, “DVI-D”, “DVI-A” }</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td rowspan="13" valign="top" >TV</td>
+	<td valign="top" >“subconnector”</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ "Unknown", "Composite", "SVIDEO", "Component", "SCART" }</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“select subconnector”</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ "Automatic", "Composite", "SVIDEO", "Component", "SCART" }</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“mode”</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ "NTSC_M", "NTSC_J", "NTSC_443", "PAL_B" } etc.</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“left margin”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=100</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“right margin”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=100</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“top margin”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=100</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“bottom margin”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=100</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“brightness”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=100</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“contrast”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=100</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“flicker reduction”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=100</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“overscan”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=100</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“saturation”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=100</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“hue”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=100</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td rowspan="2" valign="top" >Optional</td>
+	<td valign="top" >“scaling mode”</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ "None", "Full", "Center", "Full aspect" }</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“dirty”</td>
+	<td valign="top" >ENUM | IMMUTABLE</td>
+	<td valign="top" >{ "Off", "On", "Annotate" }</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td rowspan="21" valign="top" >i915</td>
+	<td rowspan="3" valign="top" >Generic</td>
+	<td valign="top" >"Broadcast RGB"</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ "Automatic", "Full", "Limited 16:235" }</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“audio”</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ "force-dvi", "off", "auto", "on" }</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >Standard name as in DRM</td>
+	<td valign="top" >Standard type as in DRM</td>
+	<td valign="top" >Standard value as in DRM</td>
+	<td valign="top" >Standard Object as in DRM</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td rowspan="17" valign="top" >SDVO-TV</td>
+	<td valign="top" >“mode”</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ "NTSC_M", "NTSC_J", "NTSC_443", "PAL_B" } etc.</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >"left_margin"</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >"right_margin"</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >"top_margin"</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >"bottom_margin"</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“hpos”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“vpos”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“contrast”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“saturation”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“hue”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“sharpness”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“flicker_filter”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“flicker_filter_adaptive”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“flicker_filter_2d”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“tv_chroma_filter”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“tv_luma_filter”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“dot_crawl”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=1</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >SDVO-TV/LVDS</td>
+	<td valign="top" >“brightness”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td rowspan="3" valign="top" >CDV gma-500</td>
+	<td rowspan="3" valign="top" >Generic</td>
+	<td valign="top" >"Broadcast RGB"</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ “Full”, “Limited 16:235” }</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >"Broadcast RGB"</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ “off”, “auto”, “on” }</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >Standard name as in DRM</td>
+	<td valign="top" >Standard type as in DRM</td>
+	<td valign="top" >Standard value as in DRM</td>
+	<td valign="top" >Standard Object as in DRM</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td rowspan="20" valign="top" >Poulsbo</td>
+	<td rowspan="2" valign="top" >Generic</td>
+	<td valign="top" >“backlight”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=100</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >Standard name as in DRM</td>
+	<td valign="top" >Standard type as in DRM</td>
+	<td valign="top" >Standard value as in DRM</td>
+	<td valign="top" >Standard Object as in DRM</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td rowspan="17" valign="top" >SDVO-TV</td>
+	<td valign="top" >“mode”</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ "NTSC_M", "NTSC_J", "NTSC_443", "PAL_B" } etc.</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >"left_margin"</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >"right_margin"</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >"top_margin"</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >"bottom_margin"</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“hpos”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“vpos”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“contrast”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“saturation”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“hue”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“sharpness”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“flicker_filter”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“flicker_filter_adaptive”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“flicker_filter_2d”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“tv_chroma_filter”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“tv_luma_filter”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“dot_crawl”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=1</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >SDVO-TV/LVDS</td>
+	<td valign="top" >“brightness”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max= SDVO dependent</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td rowspan="11" valign="top" >armada</td>
+	<td rowspan="2" valign="top" >CRTC</td>
+	<td valign="top" >"CSC_YUV"</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ "Auto" , "CCIR601", "CCIR709" }</td>
+	<td valign="top" >CRTC</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >"CSC_RGB"</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ "Auto", "Computer system", "Studio" }</td>
+	<td valign="top" >CRTC</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td rowspan="9" valign="top" >Overlay</td>
+	<td valign="top" >"colorkey"</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=0xffffff</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >"colorkey_min"</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=0xffffff</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >"colorkey_max"</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=0xffffff</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >"colorkey_val"</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=0xffffff</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >"colorkey_alpha"</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=0xffffff</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >"colorkey_mode"</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ "disabled", "Y component", "U component"
+	, "V component", "RGB", “R component", "G component", "B component" }</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >"brightness"</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=256 + 255</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >"contrast"</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=0x7fff</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >"saturation"</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=0x7fff</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td rowspan="2" valign="top" >exynos</td>
+	<td valign="top" >CRTC</td>
+	<td valign="top" >“mode”</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ "normal", "blank" }</td>
+	<td valign="top" >CRTC</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >Overlay</td>
+	<td valign="top" >“zpos”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=MAX_PLANE-1</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td rowspan="3" valign="top" >i2c/ch7006_drv</td>
+	<td valign="top" >Generic</td>
+	<td valign="top" >“scale”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=2</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td rowspan="2" valign="top" >TV</td>
+	<td valign="top" >Standard names as in DRM</td>
+	<td valign="top" >Standard types as in DRM</td>
+	<td valign="top" >Standard Values as in DRM</td>
+	<td valign="top" >Standard object as in DRM</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“mode”</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ "PAL", "PAL-M","PAL-N"}, ”PAL-Nc"
+	, "PAL-60", "NTSC-M", "NTSC-J" }</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td rowspan="16" valign="top" >nouveau</td>
+	<td rowspan="6" valign="top" >NV10 Overlay</td>
+	<td valign="top" >"colorkey"</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=0x01ffffff</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“contrast”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=8192-1</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“brightness”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=1024</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“hue”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=359</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“saturation”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=8192-1</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“iturbt_709”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=1</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td rowspan="2" valign="top" >Nv04 Overlay</td>
+	<td valign="top" >“colorkey”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=0x01ffffff</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“brightness”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=1024</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td rowspan="7" valign="top" >Display</td>
+	<td valign="top" >“dithering mode”</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ "auto", "off", "on" }</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“dithering depth”</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ "auto", "off", "on", "static 2x2", "dynamic 2x2", "temporal" }</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“underscan”</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ "auto", "6 bpc", "8 bpc" }</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“underscan hborder”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=128</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“underscan vborder”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=128</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“vibrant hue”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=180</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“color vibrance”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=200</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >Generic</td>
+	<td valign="top" >Standard name as in DRM</td>
+	<td valign="top" >Standard type as in DRM</td>
+	<td valign="top" >Standard value as in DRM</td>
+	<td valign="top" >Standard Object as in DRM</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td rowspan="2" valign="top" >omap</td>
+	<td rowspan="2" valign="top" >Generic</td>
+	<td valign="top" >“rotation”</td>
+	<td valign="top" >BITMASK</td>
+	<td valign="top" >{ 0, "rotate-0" },
+	{ 1, "rotate-90" },
+	{ 2, "rotate-180" },
+	{ 3, "rotate-270" },
+	{ 4, "reflect-x" },
+	{ 5, "reflect-y" }</td>
+	<td valign="top" >CRTC, Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >“zorder”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=3</td>
+	<td valign="top" >CRTC, Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >qxl</td>
+	<td valign="top" >Generic</td>
+	<td valign="top" >“hotplug_mode_update"</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=1</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td rowspan="10" valign="top" >radeon</td>
+	<td valign="top" >DVI-I</td>
+	<td valign="top" >“coherent”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=1</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >DAC enable load detect</td>
+	<td valign="top" >“load detection”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=1</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >TV Standard</td>
+	<td valign="top" >"tv standard"</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ "ntsc", "pal", "pal-m", "pal-60", "ntsc-j"
+	, "scart-pal", "pal-cn", "secam" }</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >legacy TMDS PLL detect</td>
+	<td valign="top" >"tmds_pll"</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ "driver", "bios" }</td>
+	<td valign="top" >-</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td rowspan="3" valign="top" >Underscan</td>
+	<td valign="top" >"underscan"</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ "off", "on", "auto" }</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >"underscan hborder"</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=128</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >"underscan vborder"</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=128</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >Audio</td>
+	<td valign="top" >“audio”</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ "off", "on", "auto" }</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >FMT Dithering</td>
+	<td valign="top" >“dither”</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ "off", "on" }</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >Generic</td>
+	<td valign="top" >Standard name as in DRM</td>
+	<td valign="top" >Standard type as in DRM</td>
+	<td valign="top" >Standard value as in DRM</td>
+	<td valign="top" >Standard Object as in DRM</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td rowspan="3" valign="top" >rcar-du</td>
+	<td rowspan="3" valign="top" >Generic</td>
+	<td valign="top" >"alpha"</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=255</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >"colorkey"</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=0x01ffffff</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
+	<td valign="top" >"zpos"</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=1, Max=7</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	</tbody>
+	</table>
+    </sect2>
   </sect1>
 
   <!-- Internals: vertical blanking -->
@@ -2527,6 +3418,10 @@ void (*disable_vblank) (struct drm_device *dev, int crtc);</synopsis>
       with a call to <function>drm_vblank_cleanup</function> in the driver
       <methodname>unload</methodname> operation handler.
     </para>
+    <sect2>
+      <title>Vertical Blanking and Interrupt Handling Functions Reference</title>
+!Edrivers/gpu/drm/drm_irq.c
+    </sect2>
   </sect1>
 
   <!-- Internals: open/close, file operations and ioctls -->
@@ -2869,17 +3764,16 @@ int num_ioctls;</synopsis>
             <term>DRM_IOCTL_MODESET_CTL</term>
             <listitem>
               <para>
-                This should be called by application level drivers before and
-                after mode setting, since on many devices the vertical blank
-                counter is reset at that time.  Internally, the DRM snapshots
-                the last vblank count when the ioctl is called with the
-                _DRM_PRE_MODESET command, so that the counter won't go backwards
-                (which is dealt with when _DRM_POST_MODESET is used).
+		This was only used for user-mode-settind drivers around
+		modesetting changes to allow the kernel to update the vblank
+		interrupt after mode setting, since on many devices the vertical
+		blank counter is reset to 0 at some point during modeset. Modern
+		drivers should not call this any more since with kernel mode
+		setting it is a no-op.
               </para>
             </listitem>
           </varlistentry>
         </variablelist>
-<!--!Edrivers/char/drm/drm_irq.c-->
       </para>
     </sect1>
 
@@ -2942,6 +3836,96 @@ int num_ioctls;</synopsis>
 	  probing, so those sections fully apply.
         </para>
       </sect2>
+      <sect2>
+        <title>DPIO</title>
+!Pdrivers/gpu/drm/i915/i915_reg.h DPIO
+	<table id="dpiox2">
+	  <title>Dual channel PHY (VLV/CHV)</title>
+	  <tgroup cols="8">
+	    <colspec colname="c0" />
+	    <colspec colname="c1" />
+	    <colspec colname="c2" />
+	    <colspec colname="c3" />
+	    <colspec colname="c4" />
+	    <colspec colname="c5" />
+	    <colspec colname="c6" />
+	    <colspec colname="c7" />
+	    <spanspec spanname="ch0" namest="c0" nameend="c3" />
+	    <spanspec spanname="ch1" namest="c4" nameend="c7" />
+	    <spanspec spanname="ch0pcs01" namest="c0" nameend="c1" />
+	    <spanspec spanname="ch0pcs23" namest="c2" nameend="c3" />
+	    <spanspec spanname="ch1pcs01" namest="c4" nameend="c5" />
+	    <spanspec spanname="ch1pcs23" namest="c6" nameend="c7" />
+	    <thead>
+	      <row>
+		<entry spanname="ch0">CH0</entry>
+		<entry spanname="ch1">CH1</entry>
+	      </row>
+	    </thead>
+	    <tbody valign="top" align="center">
+	      <row>
+		<entry spanname="ch0">CMN/PLL/REF</entry>
+		<entry spanname="ch1">CMN/PLL/REF</entry>
+	      </row>
+	      <row>
+		<entry spanname="ch0pcs01">PCS01</entry>
+		<entry spanname="ch0pcs23">PCS23</entry>
+		<entry spanname="ch1pcs01">PCS01</entry>
+		<entry spanname="ch1pcs23">PCS23</entry>
+	      </row>
+	      <row>
+		<entry>TX0</entry>
+		<entry>TX1</entry>
+		<entry>TX2</entry>
+		<entry>TX3</entry>
+		<entry>TX0</entry>
+		<entry>TX1</entry>
+		<entry>TX2</entry>
+		<entry>TX3</entry>
+	      </row>
+	      <row>
+		<entry spanname="ch0">DDI0</entry>
+		<entry spanname="ch1">DDI1</entry>
+	      </row>
+	    </tbody>
+	  </tgroup>
+	</table>
+	<table id="dpiox1">
+	  <title>Single channel PHY (CHV)</title>
+	  <tgroup cols="4">
+	    <colspec colname="c0" />
+	    <colspec colname="c1" />
+	    <colspec colname="c2" />
+	    <colspec colname="c3" />
+	    <spanspec spanname="ch0" namest="c0" nameend="c3" />
+	    <spanspec spanname="ch0pcs01" namest="c0" nameend="c1" />
+	    <spanspec spanname="ch0pcs23" namest="c2" nameend="c3" />
+	    <thead>
+	      <row>
+		<entry spanname="ch0">CH0</entry>
+	      </row>
+	    </thead>
+	    <tbody valign="top" align="center">
+	      <row>
+		<entry spanname="ch0">CMN/PLL/REF</entry>
+	      </row>
+	      <row>
+		<entry spanname="ch0pcs01">PCS01</entry>
+		<entry spanname="ch0pcs23">PCS23</entry>
+	      </row>
+	      <row>
+		<entry>TX0</entry>
+		<entry>TX1</entry>
+		<entry>TX2</entry>
+		<entry>TX3</entry>
+	      </row>
+	      <row>
+		<entry spanname="ch0">DDI2</entry>
+	      </row>
+	    </tbody>
+	  </tgroup>
+	</table>
+      </sect2>
     </sect1>
 
     <sect1>
@@ -2950,6 +3934,11 @@ int num_ioctls;</synopsis>
 	This sections covers all things related to the GEM implementation in the
 	i915 driver.
       </para>
+      <sect2>
+        <title>Batchbuffer Parsing</title>
+!Pdrivers/gpu/drm/i915/i915_cmd_parser.c batch buffer command parser
+!Idrivers/gpu/drm/i915/i915_cmd_parser.c
+      </sect2>
     </sect1>
   </chapter>
 </part>
diff --git a/Documentation/EDID/1024x768.S b/Documentation/EDID/1024x768.S
index 4b486fe31b32..6f3e4b75e49e 100644
--- a/Documentation/EDID/1024x768.S
+++ b/Documentation/EDID/1024x768.S
@@ -36,7 +36,7 @@
 #define DPI 72
 #define VFREQ 60 /* Hz */
 #define TIMING_NAME "Linux XGA"
-#define ESTABLISHED_TIMINGS_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */
+#define ESTABLISHED_TIMING2_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */
 #define HSYNC_POL 0
 #define VSYNC_POL 0
 #define CRC 0x55
diff --git a/Documentation/EDID/1280x1024.S b/Documentation/EDID/1280x1024.S
index a2799fe33a4d..bd9bef2a65af 100644
--- a/Documentation/EDID/1280x1024.S
+++ b/Documentation/EDID/1280x1024.S
@@ -36,7 +36,7 @@
 #define DPI 72
 #define VFREQ 60 /* Hz */
 #define TIMING_NAME "Linux SXGA"
-#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */
+/* No ESTABLISHED_TIMINGx_BITS */
 #define HSYNC_POL 1
 #define VSYNC_POL 1
 #define CRC 0xa0
diff --git a/Documentation/EDID/1600x1200.S b/Documentation/EDID/1600x1200.S
index 0ded64cfd1f5..a45101c6160c 100644
--- a/Documentation/EDID/1600x1200.S
+++ b/Documentation/EDID/1600x1200.S
@@ -36,7 +36,7 @@
 #define DPI 72
 #define VFREQ 60 /* Hz */
 #define TIMING_NAME "Linux UXGA"
-#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */
+/* No ESTABLISHED_TIMINGx_BITS */
 #define HSYNC_POL 1
 #define VSYNC_POL 1
 #define CRC 0x9d
diff --git a/Documentation/EDID/1680x1050.S b/Documentation/EDID/1680x1050.S
index 96f67cafcf2e..b0d7c69282b4 100644
--- a/Documentation/EDID/1680x1050.S
+++ b/Documentation/EDID/1680x1050.S
@@ -36,7 +36,7 @@
 #define DPI 96
 #define VFREQ 60 /* Hz */
 #define TIMING_NAME "Linux WSXGA"
-#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */
+/* No ESTABLISHED_TIMINGx_BITS */
 #define HSYNC_POL 1
 #define VSYNC_POL 1
 #define CRC 0x26
diff --git a/Documentation/EDID/1920x1080.S b/Documentation/EDID/1920x1080.S
index 36ed5d571d0a..3084355e81e7 100644
--- a/Documentation/EDID/1920x1080.S
+++ b/Documentation/EDID/1920x1080.S
@@ -36,7 +36,7 @@
 #define DPI 96
 #define VFREQ 60 /* Hz */
 #define TIMING_NAME "Linux FHD"
-#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */
+/* No ESTABLISHED_TIMINGx_BITS */
 #define HSYNC_POL 1
 #define VSYNC_POL 1
 #define CRC 0x05
diff --git a/Documentation/EDID/800x600.S b/Documentation/EDID/800x600.S
new file mode 100644
index 000000000000..6644e26d5801
--- /dev/null
+++ b/Documentation/EDID/800x600.S
@@ -0,0 +1,41 @@
+/*
+   800x600.S: EDID data set for standard 800x600 60 Hz monitor
+
+   Copyright (C) 2011 Carsten Emde <C.Emde@osadl.org>
+   Copyright (C) 2014 Linaro Limited
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License
+   as published by the Free Software Foundation; either version 2
+   of the License, or (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+*/
+
+/* EDID */
+#define VERSION 1
+#define REVISION 3
+
+/* Display */
+#define CLOCK 40000 /* kHz */
+#define XPIX 800
+#define YPIX 600
+#define XY_RATIO XY_RATIO_4_3
+#define XBLANK 256
+#define YBLANK 28
+#define XOFFSET 40
+#define XPULSE 128
+#define YOFFSET (63+1)
+#define YPULSE (63+4)
+#define DPI 72
+#define VFREQ 60 /* Hz */
+#define TIMING_NAME "Linux SVGA"
+#define ESTABLISHED_TIMING1_BITS 0x01 /* Bit 0: 800x600 @ 60Hz */
+#define HSYNC_POL 1
+#define VSYNC_POL 1
+#define CRC 0xc2
+
+#include "edid.S"
diff --git a/Documentation/EDID/HOWTO.txt b/Documentation/EDID/HOWTO.txt
index 7146db1d9e8c..835db332289b 100644
--- a/Documentation/EDID/HOWTO.txt
+++ b/Documentation/EDID/HOWTO.txt
@@ -18,7 +18,7 @@ CONFIG_DRM_LOAD_EDID_FIRMWARE was introduced. It allows to provide an
 individually prepared or corrected EDID data set in the /lib/firmware
 directory from where it is loaded via the firmware interface. The code
 (see drivers/gpu/drm/drm_edid_load.c) contains built-in data sets for
-commonly used screen resolutions (1024x768, 1280x1024, 1600x1200,
+commonly used screen resolutions (800x600, 1024x768, 1280x1024, 1600x1200,
 1680x1050, 1920x1080) as binary blobs, but the kernel source tree does
 not contain code to create these data. In order to elucidate the origin
 of the built-in binary EDID blobs and to facilitate the creation of
diff --git a/Documentation/EDID/edid.S b/Documentation/EDID/edid.S
index ea97ae275fca..7ac03276d7a2 100644
--- a/Documentation/EDID/edid.S
+++ b/Documentation/EDID/edid.S
@@ -33,6 +33,17 @@
 #define XY_RATIO_5_4	0b10
 #define XY_RATIO_16_9	0b11
 
+/* Provide defaults for the timing bits */
+#ifndef ESTABLISHED_TIMING1_BITS
+#define ESTABLISHED_TIMING1_BITS 0x00
+#endif
+#ifndef ESTABLISHED_TIMING2_BITS
+#define ESTABLISHED_TIMING2_BITS 0x00
+#endif
+#ifndef ESTABLISHED_TIMING3_BITS
+#define ESTABLISHED_TIMING3_BITS 0x00
+#endif
+
 #define mfgname2id(v1,v2,v3) \
 	((((v1-'@')&0x1f)<<10)+(((v2-'@')&0x1f)<<5)+((v3-'@')&0x1f))
 #define swap16(v1) ((v1>>8)+((v1&0xff)<<8))
@@ -139,7 +150,7 @@ white_x_y_msb:	.byte	0x50,0x54
    Bit 2	640x480 @ 75 Hz
    Bit 1	800x600 @ 56 Hz
    Bit 0	800x600 @ 60 Hz */
-estbl_timing1:	.byte	0x00
+estbl_timing1:	.byte	ESTABLISHED_TIMING1_BITS
 
 /* Bit 7	800x600 @ 72 Hz
    Bit 6	800x600 @ 75 Hz
@@ -149,11 +160,11 @@ estbl_timing1:	.byte	0x00
    Bit 2	1024x768 @ 72 Hz
    Bit 1	1024x768 @ 75 Hz
    Bit 0	1280x1024 @ 75 Hz */
-estbl_timing2:	.byte	ESTABLISHED_TIMINGS_BITS
+estbl_timing2:	.byte	ESTABLISHED_TIMING2_BITS
 
 /* Bit 7	1152x870 @ 75 Hz (Apple Macintosh II)
    Bits 6-0 	Other manufacturer-specific display mod */
-estbl_timing3:	.byte	0x00
+estbl_timing3:	.byte	ESTABLISHED_TIMING3_BITS
 
 /* Standard timing */
 /* X resolution, less 31, divided by 8 (256-2288 pixels) */
diff --git a/Documentation/cpu-freq/cpu-drivers.txt b/Documentation/cpu-freq/cpu-drivers.txt
index b045fe54986a..14f4e6336d88 100644
--- a/Documentation/cpu-freq/cpu-drivers.txt
+++ b/Documentation/cpu-freq/cpu-drivers.txt
@@ -26,6 +26,7 @@ Contents:
 1.4  target/target_index or setpolicy?
 1.5  target/target_index
 1.6  setpolicy
+1.7  get_intermediate and target_intermediate
 2.   Frequency Table Helpers
 
 
@@ -79,6 +80,10 @@ cpufreq_driver.attr -		A pointer to a NULL-terminated list of
 				"struct freq_attr" which allow to
 				export values to sysfs.
 
+cpufreq_driver.get_intermediate
+and target_intermediate		Used to switch to stable frequency while
+				changing CPU frequency.
+
 
 1.2 Per-CPU Initialization
 --------------------------
@@ -151,7 +156,7 @@ Some cpufreq-capable processors switch the frequency between certain
 limits on their own. These shall use the ->setpolicy call
 
 
-1.4. target/target_index
+1.5. target/target_index
 -------------
 
 The target_index call has two arguments: struct cpufreq_policy *policy,
@@ -160,6 +165,9 @@ and unsigned int index (into the exposed frequency table).
 The CPUfreq driver must set the new frequency when called here. The
 actual frequency must be determined by freq_table[index].frequency.
 
+It should always restore to earlier frequency (i.e. policy->restore_freq) in
+case of errors, even if we switched to intermediate frequency earlier.
+
 Deprecated:
 ----------
 The target call has three arguments: struct cpufreq_policy *policy,
@@ -179,7 +187,7 @@ Here again the frequency table helper might assist you - see section 2
 for details.
 
 
-1.5 setpolicy
+1.6 setpolicy
 ---------------
 
 The setpolicy call only takes a struct cpufreq_policy *policy as
@@ -190,6 +198,23 @@ setting when policy->policy is CPUFREQ_POLICY_PERFORMANCE, and a
 powersaving-oriented setting when CPUFREQ_POLICY_POWERSAVE. Also check
 the reference implementation in drivers/cpufreq/longrun.c
 
+1.7 get_intermediate and target_intermediate
+--------------------------------------------
+
+Only for drivers with target_index() and CPUFREQ_ASYNC_NOTIFICATION unset.
+
+get_intermediate should return a stable intermediate frequency platform wants to
+switch to, and target_intermediate() should set CPU to to that frequency, before
+jumping to the frequency corresponding to 'index'. Core will take care of
+sending notifications and driver doesn't have to handle them in
+target_intermediate() or target_index().
+
+Drivers can return '0' from get_intermediate() in case they don't wish to switch
+to intermediate frequency for some target frequency. In that case core will
+directly call ->target_index().
+
+NOTE: ->target_index() should restore to policy->restore_freq in case of
+failures as core would send notifications for that.
 
 
 2. Frequency Table Helpers
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index a5160d8cbb5f..b9ec668bfe62 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -20,12 +20,15 @@ Required properties:
 	"allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13
 	"allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
 	"allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
+	"allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31
 	"allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
 	"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
 	"allwinner,sun4i-a10-apb0-clk" - for the APB0 clock
+	"allwinner,sun6i-a31-apb0-clk" - for the APB0 clock on A31
 	"allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10
 	"allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
 	"allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s
+	"allwinner,sun6i-a31-apb0-gates-clk" - for the APB0 gates on A31
 	"allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20
 	"allwinner,sun4i-a10-apb1-clk" - for the APB1 clock
 	"allwinner,sun4i-a10-apb1-mux-clk" - for the APB1 clock muxing
@@ -41,6 +44,7 @@ Required properties:
 	"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
 	"allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
 	"allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
+	"allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31
 
 Required properties for all clocks:
 - reg : shall be the control register address for the clock.
diff --git a/Documentation/devicetree/bindings/clock/ti/apll.txt b/Documentation/devicetree/bindings/clock/ti/apll.txt
index 7faf5a68b3be..ade4dd4c30f0 100644
--- a/Documentation/devicetree/bindings/clock/ti/apll.txt
+++ b/Documentation/devicetree/bindings/clock/ti/apll.txt
@@ -14,18 +14,32 @@ a subtype of a DPLL [2], although a simplified one at that.
 [2] Documentation/devicetree/bindings/clock/ti/dpll.txt
 
 Required properties:
-- compatible : shall be "ti,dra7-apll-clock"
+- compatible : shall be "ti,dra7-apll-clock" or "ti,omap2-apll-clock"
 - #clock-cells : from common clock binding; shall be set to 0.
 - clocks : link phandles of parent clocks (clk-ref and clk-bypass)
 - reg : address and length of the register set for controlling the APLL.
   It contains the information of registers in the following order:
-	"control" - contains the control register base address
-	"idlest" - contains the idlest register base address
+	"control" - contains the control register offset
+	"idlest" - contains the idlest register offset
+	"autoidle" - contains the autoidle register offset (OMAP2 only)
+- ti,clock-frequency : static clock frequency for the clock (OMAP2 only)
+- ti,idlest-shift : bit-shift for the idlest field (OMAP2 only)
+- ti,bit-shift : bit-shift for enable and autoidle fields (OMAP2 only)
 
 Examples:
-	apll_pcie_ck: apll_pcie_ck@4a008200 {
+	apll_pcie_ck: apll_pcie_ck {
 		#clock-cells = <0>;
 		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
-		reg = <0x4a00821c 0x4>, <0x4a008220 0x4>;
+		reg = <0x021c>, <0x0220>;
 		compatible = "ti,dra7-apll-clock";
 	};
+
+	apll96_ck: apll96_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2-apll-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <2>;
+		ti,idlest-shift = <8>;
+		ti,clock-frequency = <96000000>;
+		reg = <0x0500>, <0x0530>, <0x0520>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt
index 30bfdb7c9f18..df57009ff8e7 100644
--- a/Documentation/devicetree/bindings/clock/ti/dpll.txt
+++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt
@@ -24,12 +24,14 @@ Required properties:
 		"ti,omap4-dpll-core-clock",
 		"ti,omap4-dpll-m4xen-clock",
 		"ti,omap4-dpll-j-type-clock",
+		"ti,omap5-mpu-dpll-clock",
 		"ti,am3-dpll-no-gate-clock",
 		"ti,am3-dpll-j-type-clock",
 		"ti,am3-dpll-no-gate-j-type-clock",
 		"ti,am3-dpll-clock",
 		"ti,am3-dpll-core-clock",
 		"ti,am3-dpll-x2-clock",
+		"ti,omap2-dpll-core-clock",
 
 - #clock-cells : from common clock binding; shall be set to 0.
 - clocks : link phandles of parent clocks, first entry lists reference clock
@@ -41,6 +43,7 @@ Required properties:
 	"mult-div1" - contains the multiplier / divider register base address
 	"autoidle" - contains the autoidle register base address (optional)
   ti,am3-* dpll types do not have autoidle register
+  ti,omap2-* dpll type does not support idlest / autoidle registers
 
 Optional properties:
 - DPLL mode setting - defining any one or more of the following overrides
@@ -73,3 +76,10 @@ Examples:
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
 		reg = <0x90>, <0x5c>, <0x68>;
 	};
+
+	dpll_ck: dpll_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2-dpll-core-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0500>, <0x0540>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
new file mode 100644
index 000000000000..585e8c191f50
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
@@ -0,0 +1,96 @@
+Device Tree Clock bindings for ATL (Audio Tracking Logic) of DRA7 SoC.
+
+The ATL IP is used to generate clock to be used to synchronize baseband and
+audio codec. A single ATL IP provides four ATL clock instances sharing the same
+functional clock but can be configured to provide different clocks.
+ATL can maintain a clock averages to some desired frequency based on the bws/aws
+signals - can compensate the drift between the two ws signal.
+
+In order to provide the support for ATL and it's output clocks (which can be used
+internally within the SoC or external components) two sets of bindings is needed:
+
+Clock tree binding:
+This binding uses the common clock binding[1].
+To be able to integrate the ATL clocks with DT clock tree.
+Provides ccf level representation of the ATL clocks to be used by drivers.
+Since the clock instances are part of a single IP this binding is used as a node
+for the DT clock tree, the IP driver is needed to handle the actual configuration
+of the IP.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,dra7-atl-clock"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles to functional clock of ATL
+
+Binding for the IP driver:
+This binding is used to configure the IP driver which is going to handle the
+configuration of the IP for the ATL clock instances.
+
+Required properties:
+- compatible : shall be "ti,dra7-atl"
+- reg : base address for the ATL IP
+- ti,provided-clocks : List of phandles to the clocks associated with the ATL
+- clocks : link phandles to functional clock of ATL
+- clock-names : Shall be set to "fck"
+- ti,hwmods : Shall be set to "atl"
+
+Optional properties:
+Configuration of ATL instances:
+- atl{0/1/2/3} {
+	- bws : Baseband word select signal selection
+	- aws : Audio word select signal selection
+};
+
+For valid word select signals, see the dt-bindings/clk/ti-dra7-atl.h include
+file.
+
+Examples:
+/* clock bindings for atl provided clocks */
+atl_clkin0_ck: atl_clkin0_ck {
+	#clock-cells = <0>;
+	compatible = "ti,dra7-atl-clock";
+	clocks = <&atl_gfclk_mux>;
+};
+
+atl_clkin1_ck: atl_clkin1_ck {
+	#clock-cells = <0>;
+	compatible = "ti,dra7-atl-clock";
+	clocks = <&atl_gfclk_mux>;
+};
+
+atl_clkin2_ck: atl_clkin2_ck {
+	#clock-cells = <0>;
+	compatible = "ti,dra7-atl-clock";
+	clocks = <&atl_gfclk_mux>;
+};
+
+atl_clkin3_ck: atl_clkin3_ck {
+	#clock-cells = <0>;
+	compatible = "ti,dra7-atl-clock";
+	clocks = <&atl_gfclk_mux>;
+};
+
+/* binding for the IP */
+atl: atl@4843c000 {
+	compatible = "ti,dra7-atl";
+	reg = <0x4843c000 0x3ff>;
+	ti,hwmods = "atl";
+	ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
+				<&atl_clkin2_ck>, <&atl_clkin3_ck>;
+	clocks = <&atl_gfclk_mux>;
+	clock-names = "fck";
+	status = "disabled";
+};
+
+#include <dt-bindings/clk/ti-dra7-atl.h>
+
+&atl {
+	status = "okay";
+
+	atl2 {
+		bws = <DRA7_ATL_WS_MCASP2_FSX>;
+		aws = <DRA7_ATL_WS_MCASP3_FSX>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt
index 125281aaa4ca..03f8fdee62a7 100644
--- a/Documentation/devicetree/bindings/clock/ti/gate.txt
+++ b/Documentation/devicetree/bindings/clock/ti/gate.txt
@@ -25,6 +25,11 @@ Required properties:
 			  to map clockdomains properly
   "ti,hsdiv-gate-clock" - gate clock with OMAP36xx specific hardware handling,
 			  required for a hardware errata
+  "ti,composite-gate-clock" - composite gate clock, to be part of composite
+			      clock
+  "ti,composite-no-wait-gate-clock" - composite gate clock that does not wait
+				      for clock to be active before returning
+				      from clk_enable()
 - #clock-cells : from common clock binding; shall be set to 0
 - clocks : link to phandle of parent clock
 - reg : offset for register controlling adjustable gate, not needed for
@@ -41,7 +46,7 @@ Examples:
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&core_96m_fck>;
-		reg = <0x48004a00 0x4>;
+		reg = <0x0a00>;
 		ti,bit-shift = <25>;
 	};
 
@@ -57,7 +62,7 @@ Examples:
 		#clock-cells = <0>;
 		compatible = "ti,dss-gate-clock";
 		clocks = <&dpll4_m4x2_ck>;
-		reg = <0x48004e00 0x4>;
+		reg = <0x0e00>;
 		ti,bit-shift = <0>;
 	};
 
@@ -65,7 +70,7 @@ Examples:
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&ipss_ick>;
-		reg = <0x4800259c 0x4>;
+		reg = <0x059c>;
 		ti,bit-shift = <1>;
 	};
 
@@ -80,6 +85,22 @@ Examples:
 		compatible = "ti,hsdiv-gate-clock";
 		clocks = <&dpll4_m2x2_mul_ck>;
 		ti,bit-shift = <0x1b>;
-		reg = <0x48004d00 0x4>;
+		reg = <0x0d00>;
 		ti,set-bit-to-disable;
 	};
+
+	vlynq_gate_fck: vlynq_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0200>;
+	};
+
+	sys_clkout2_src_gate: sys_clkout2_src_gate {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <15>;
+		reg = <0x0070>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt
index 064e8caccac3..3111a409fea6 100644
--- a/Documentation/devicetree/bindings/clock/ti/interface.txt
+++ b/Documentation/devicetree/bindings/clock/ti/interface.txt
@@ -21,6 +21,8 @@ Required properties:
   "ti,omap3-dss-interface-clock" - interface clock with DSS specific HW handling
   "ti,omap3-ssi-interface-clock" - interface clock with SSI specific HW handling
   "ti,am35xx-interface-clock" - interface clock with AM35xx specific HW handling
+  "ti,omap2430-interface-clock" - interface clock with OMAP2430 specific HW
+				  handling
 - #clock-cells : from common clock binding; shall be set to 0
 - clocks : link to phandle of parent clock
 - reg : base address for the control register
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
index efa8b8451f93..b48f4ef31d93 100644
--- a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
@@ -136,6 +136,7 @@ of the following host1x client modules:
   - compatible: "nvidia,tegra<chip>-hdmi"
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
+  - hdmi-supply: supply for the +5V HDMI connector pin
   - vdd-supply: regulator for supply voltage
   - pll-supply: regulator for PLL
   - clocks: Must contain an entry for each entry in clock-names.
@@ -180,6 +181,7 @@ of the following host1x client modules:
     See ../reset/reset.txt for details.
   - reset-names: Must include the following entries:
     - dsi
+  - avdd-dsi-supply: phandle of a supply that powers the DSI controller
   - nvidia,mipi-calibrate: Should contain a phandle and a specifier specifying
     which pads are used by this DSI output and need to be calibrated. See also
     ../mipi/nvidia,tegra114-mipi.txt.
diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
index c55b8c016a9e..1b66a413fb9d 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
@@ -1,7 +1,13 @@
 Binding for TI/National Semiconductor LP55xx Led Drivers
 
 Required properties:
-- compatible: "national,lp5521" or "national,lp5523" or "ti,lp5562" or "ti,lp8501"
+- compatible: one of
+	national,lp5521
+	national,lp5523
+	ti,lp55231
+	ti,lp5562
+	ti,lp8501
+
 - reg: I2C slave address
 - clock-mode: Input clock mode, (0: automode, 1: internal, 2: external)
 
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.txt b/Documentation/devicetree/bindings/leds/leds-pwm.txt
index 7297107cf832..6c6583c35f2f 100644
--- a/Documentation/devicetree/bindings/leds/leds-pwm.txt
+++ b/Documentation/devicetree/bindings/leds/leds-pwm.txt
@@ -13,6 +13,8 @@ LED sub-node properties:
   For the pwms and pwm-names property please refer to:
   Documentation/devicetree/bindings/pwm/pwm.txt
 - max-brightness : Maximum brightness possible for the LED
+- active-low : (optional) For PWMs where the LED is wired to supply
+  rather than ground.
 - label :  (optional)
   see Documentation/devicetree/bindings/leds/common.txt
 - linux,default-trigger :  (optional)
diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
index 8e15ec35ac99..b9ee7b98d3e2 100644
--- a/Documentation/devicetree/bindings/mfd/twl4030-power.txt
+++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
@@ -5,7 +5,22 @@ to control the power resources, including power scripts. For now, the
 binding only supports the complete shutdown of the system after poweroff.
 
 Required properties:
-- compatible : must be "ti,twl4030-power"
+- compatible : must be one of the following
+	"ti,twl4030-power"
+	"ti,twl4030-power-reset"
+	"ti,twl4030-power-idle"
+	"ti,twl4030-power-idle-osc-off"
+
+The use of ti,twl4030-power-reset is recommended at least on
+3530 that needs a special configuration for warm reset to work.
+
+When using ti,twl4030-power-idle, the TI recommended configuration
+for idle modes is loaded to the tlw4030 PMIC.
+
+When using ti,twl4030-power-idle-osc-off, the TI recommended
+configuration is used with the external oscillator being shut
+down during off-idle. Note that this does not work on all boards
+depending on how the external oscillator is wired.
 
 Optional properties:
 - ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or
diff --git a/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt b/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
new file mode 100644
index 000000000000..d01ed63d3ebb
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
@@ -0,0 +1,17 @@
+* AMD 10GbE PHY driver (amd-xgbe-phy)
+
+Required properties:
+- compatible: Should be "amd,xgbe-phy-seattle-v1a" and
+  "ethernet-phy-ieee802.3-c45"
+- reg: Address and length of the register sets for the device
+   - SerDes Rx/Tx registers
+   - SerDes integration registers (1/2)
+   - SerDes integration registers (2/2)
+
+Example:
+	xgbe_phy@e1240800 {
+		compatible = "amd,xgbe-phy-seattle-v1a", "ethernet-phy-ieee802.3-c45";
+		reg = <0 0xe1240800 0 0x00400>,
+		      <0 0xe1250000 0 0x00060>,
+		      <0 0xe1250080 0 0x00004>;
+	};
diff --git a/Documentation/devicetree/bindings/net/amd-xgbe.txt b/Documentation/devicetree/bindings/net/amd-xgbe.txt
new file mode 100644
index 000000000000..ea0c7908a3b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/amd-xgbe.txt
@@ -0,0 +1,34 @@
+* AMD 10GbE driver (amd-xgbe)
+
+Required properties:
+- compatible: Should be "amd,xgbe-seattle-v1a"
+- reg: Address and length of the register sets for the device
+   - MAC registers
+   - PCS registers
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupts: Should contain the amd-xgbe interrupt
+- clocks: Should be the DMA clock for the amd-xgbe device (used for
+  calculating the correct Rx interrupt watchdog timer value on a DMA
+  channel for coalescing)
+- clock-names: Should be the name of the DMA clock, "dma_clk"
+- phy-handle: See ethernet.txt file in the same directory
+- phy-mode: See ethernet.txt file in the same directory
+
+Optional properties:
+- mac-address: mac address to be assigned to the device. Can be overridden
+  by UEFI.
+
+Example:
+	xgbe@e0700000 {
+		compatible = "amd,xgbe-seattle-v1a";
+		reg = <0 0xe0700000 0 0x80000>,
+		      <0 0xe0780000 0 0x80000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 325 4>;
+		clocks = <&xgbe_clk>;
+		clock-names = "dma_clk";
+		phy-handle = <&phy>;
+		phy-mode = "xgmii";
+		mac-address = [ 02 a1 a2 a3 a4 a5 ];
+	};
diff --git a/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt b/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt
index f2febb94550e..451fef26b4df 100644
--- a/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt
+++ b/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt
@@ -24,7 +24,7 @@ Optional properties:
 - fixed-link: When the GENET interface is connected to a MoCA hardware block or
   when operating in a RGMII to RGMII type of connection, or when the MDIO bus is
   voluntarily disabled, this property should be used to describe the "fixed link".
-  See Documentation/devicetree/bindings/net/fsl-tsec-phy.txt for information on
+  See Documentation/devicetree/bindings/net/fixed-link.txt for information on
   the property specifics
 
 Required child nodes:
diff --git a/Documentation/devicetree/bindings/net/broadcom-systemport.txt b/Documentation/devicetree/bindings/net/broadcom-systemport.txt
new file mode 100644
index 000000000000..c183ea90d9bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/broadcom-systemport.txt
@@ -0,0 +1,29 @@
+* Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT)
+
+Required properties:
+- compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport"
+- reg: address and length of the register set for the device.
+- interrupts: interrupts for the device, first cell must be for the the rx
+  interrupts, and the second cell should be for the transmit queues
+- local-mac-address: Ethernet MAC address (48 bits) of this adapter
+- phy-mode: Should be a string describing the PHY interface to the
+  Ethernet switch/PHY, see Documentation/devicetree/bindings/net/ethernet.txt
+- fixed-link: see Documentation/devicetree/bindings/net/fixed-link.txt for
+  the property specific details
+
+Optional properties:
+- systemport,num-tier2-arb: number of tier 2 arbiters, an integer
+- systemport,num-tier1-arb: number of tier 1 arbiters, an integer
+- systemport,num-txq: number of HW transmit queues, an integer
+- systemport,num-rxq: number of HW receive queues, an integer
+
+Example:
+ethernet@f04a0000 {
+	compatible = "brcm,systemport-v1.00";
+	reg = <0xf04a0000 0x4650>;
+	local-mac-address = [ 00 11 22 33 44 55 ];
+	fixed-link = <0 1 1000 0 0>;
+	phy-mode = "gmii";
+	interrupts = <0x0 0x16 0x0>,
+		<0x0 0x17 0x0>;
+};
diff --git a/Documentation/devicetree/bindings/net/can/xilinx_can.txt b/Documentation/devicetree/bindings/net/can/xilinx_can.txt
new file mode 100644
index 000000000000..fe38847d8e26
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/xilinx_can.txt
@@ -0,0 +1,44 @@
+Xilinx Axi CAN/Zynq CANPS controller Device Tree Bindings
+---------------------------------------------------------
+
+Required properties:
+- compatible		: Should be "xlnx,zynq-can-1.0" for Zynq CAN
+			  controllers and "xlnx,axi-can-1.00.a" for Axi CAN
+			  controllers.
+- reg			: Physical base address and size of the Axi CAN/Zynq
+			  CANPS registers map.
+- interrupts		: Property with a value describing the interrupt
+			  number.
+- interrupt-parent	: Must be core interrupt controller
+- clock-names		: List of input clock names - "can_clk", "pclk"
+			  (For CANPS), "can_clk" , "s_axi_aclk"(For AXI CAN)
+			  (See clock bindings for details).
+- clocks		: Clock phandles (see clock bindings for details).
+- tx-fifo-depth		: Can Tx fifo depth.
+- rx-fifo-depth		: Can Rx fifo depth.
+
+
+Example:
+
+For Zynq CANPS Dts file:
+	zynq_can_0: can@e0008000 {
+			compatible = "xlnx,zynq-can-1.0";
+			clocks = <&clkc 19>, <&clkc 36>;
+			clock-names = "can_clk", "pclk";
+			reg = <0xe0008000 0x1000>;
+			interrupts = <0 28 4>;
+			interrupt-parent = <&intc>;
+			tx-fifo-depth = <0x40>;
+			rx-fifo-depth = <0x40>;
+		};
+For Axi CAN Dts file:
+	axi_can_0: axi-can@40000000 {
+			compatible = "xlnx,axi-can-1.00.a";
+			clocks = <&clkc 0>, <&clkc 1>;
+			clock-names = "can_clk","s_axi_aclk" ;
+			reg = <0x40000000 0x10000>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 59 1>;
+			tx-fifo-depth = <0x40>;
+			rx-fifo-depth = <0x40>;
+		};
diff --git a/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt b/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt
index 7ff57a119f81..764c0c79b43d 100644
--- a/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt
+++ b/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt
@@ -2,7 +2,9 @@ TI CPSW Phy mode Selection Device Tree Bindings
 -----------------------------------------------
 
 Required properties:
-- compatible		: Should be "ti,am3352-cpsw-phy-sel"
+- compatible		: Should be "ti,am3352-cpsw-phy-sel" for am335x platform and
+			  "ti,dra7xx-cpsw-phy-sel" for dra7xx platform
+			  "ti,am43xx-cpsw-phy-sel" for am43xx platform
 - reg			: physical base address and size of the cpsw
 			  registers map
 - reg-names		: names of the register map given in "reg" node
diff --git a/Documentation/devicetree/bindings/net/fixed-link.txt b/Documentation/devicetree/bindings/net/fixed-link.txt
new file mode 100644
index 000000000000..82bf7e0f47b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fixed-link.txt
@@ -0,0 +1,42 @@
+Fixed link Device Tree binding
+------------------------------
+
+Some Ethernet MACs have a "fixed link", and are not connected to a
+normal MDIO-managed PHY device. For those situations, a Device Tree
+binding allows to describe a "fixed link".
+
+Such a fixed link situation is described by creating a 'fixed-link'
+sub-node of the Ethernet MAC device node, with the following
+properties:
+
+* 'speed' (integer, mandatory), to indicate the link speed. Accepted
+  values are 10, 100 and 1000
+* 'full-duplex' (boolean, optional), to indicate that full duplex is
+  used. When absent, half duplex is assumed.
+* 'pause' (boolean, optional), to indicate that pause should be
+  enabled.
+* 'asym-pause' (boolean, optional), to indicate that asym_pause should
+  be enabled.
+
+Old, deprecated 'fixed-link' binding:
+
+* A 'fixed-link' property in the Ethernet MAC node, with 5 cells, of the
+  form <a b c d e> with the following accepted values:
+  - a: emulated PHY ID, choose any but but unique to the all specified
+    fixed-links, from 0 to 31
+  - b: duplex configuration: 0 for half duplex, 1 for full duplex
+  - c: link speed in Mbits/sec, accepted values are: 10, 100 and 1000
+  - d: pause configuration: 0 for no pause, 1 for pause
+  - e: asymmetric pause configuration: 0 for no asymmetric pause, 1 for
+    asymmetric pause
+
+Example:
+
+ethernet@0 {
+	...
+	fixed-link {
+	      speed = <1000>;
+	      full-duplex;
+	};
+	...
+};
diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
index 737cdef4f903..be6ea8960f20 100644
--- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
+++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
@@ -42,10 +42,7 @@ Properties:
     interrupt.  For TSEC and eTSEC devices, the first interrupt is
     transmit, the second is receive, and the third is error.
   - phy-handle : See ethernet.txt file in the same directory.
-  - fixed-link : <a b c d e> where a is emulated phy id - choose any,
-    but unique to the all specified fixed-links, b is duplex - 0 half,
-    1 full, c is link speed - d#10/d#100/d#1000, d is pause - 0 no
-    pause, 1 pause, e is asym_pause - 0 no asym_pause, 1 asym_pause.
+  - fixed-link : See fixed-link.txt in the same directory.
   - phy-connection-type : See ethernet.txt file in the same directory.
     This property is only really needed if the connection is of type
     "rgmii-id", as all other connection types are detected by hardware.
diff --git a/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt b/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt
new file mode 100644
index 000000000000..75d398bb1fbb
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt
@@ -0,0 +1,36 @@
+Hisilicon hix5hd2 gmac controller
+
+Required properties:
+- compatible: should be "hisilicon,hix5hd2-gmac".
+- reg: specifies base physical address(s) and size of the device registers.
+  The first region is the MAC register base and size.
+  The second region is external interface control register.
+- interrupts: should contain the MAC interrupt.
+- #address-cells: must be <1>.
+- #size-cells: must be <0>.
+- phy-mode: see ethernet.txt [1].
+- phy-handle: see ethernet.txt [1].
+- mac-address: see ethernet.txt [1].
+- clocks: clock phandle and specifier pair.
+
+- PHY subnode: inherits from phy binding [2]
+
+[1] Documentation/devicetree/bindings/net/ethernet.txt
+[2] Documentation/devicetree/bindings/net/phy.txt
+
+Example:
+	gmac0: ethernet@f9840000 {
+		compatible = "hisilicon,hix5hd2-gmac";
+		reg = <0xf9840000 0x1000>,<0xf984300c 0x4>;
+		interrupts = <0 71 4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy-mode = "mii";
+		phy-handle = <&phy2>;
+		mac-address = [00 00 00 00 00 00];
+		clocks = <&clock HIX5HD2_MAC0_CLK>;
+
+		phy2: ethernet-phy@2 {
+			reg = <2>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt b/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt
new file mode 100644
index 000000000000..d3bbdded4cbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt
@@ -0,0 +1,23 @@
+* AT86RF230 IEEE 802.15.4 *
+
+Required properties:
+  - compatible:		should be "atmel,at86rf230", "atmel,at86rf231",
+			"atmel,at86rf233" or "atmel,at86rf212"
+  - spi-max-frequency:	maximal bus speed, should be set to 7500000 depends
+			sync or async operation mode
+  - reg:		the chipselect index
+  - interrupts:		the interrupt generated by the device
+
+Optional properties:
+  - reset-gpio:		GPIO spec for the rstn pin
+  - sleep-gpio:		GPIO spec for the slp_tr pin
+
+Example:
+
+	at86rf231@0 {
+		compatible = "atmel,at86rf231";
+		spi-max-frequency = <7500000>;
+		reg = <0>;
+		interrupts = <19 1>;
+		interrupt-parent = <&gpio3>;
+	};
diff --git a/Documentation/devicetree/bindings/net/micrel-ks8851.txt b/Documentation/devicetree/bindings/net/micrel-ks8851.txt
index d54d0cc79487..bbdf9a7359a2 100644
--- a/Documentation/devicetree/bindings/net/micrel-ks8851.txt
+++ b/Documentation/devicetree/bindings/net/micrel-ks8851.txt
@@ -1,9 +1,18 @@
-Micrel KS8851 Ethernet mac
+Micrel KS8851 Ethernet mac (MLL)
 
 Required properties:
-- compatible = "micrel,ks8851-ml" of parallel interface
+- compatible = "micrel,ks8851-mll" of parallel interface
 - reg : 2 physical address and size of registers for data and command
 - interrupts : interrupt connection
 
+Micrel KS8851 Ethernet mac (SPI)
+
+Required properties:
+- compatible = "micrel,ks8851" or the deprecated "ks8851"
+- reg : chip select number
+- interrupts : interrupt connection
+
 Optional properties:
-- vdd-supply:	supply for Ethernet mac
+- vdd-supply: analog 3.3V supply for Ethernet mac
+- vdd-io-supply: digital 1.8V IO supply for Ethernet mac
+- reset-gpios: reset_n input pin
diff --git a/Documentation/devicetree/bindings/net/micrel-ksz9021.txt b/Documentation/devicetree/bindings/net/micrel-ksz9021.txt
deleted file mode 100644
index 997a63f1aea1..000000000000
--- a/Documentation/devicetree/bindings/net/micrel-ksz9021.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Micrel KSZ9021 Gigabit Ethernet PHY
-
-Some boards require special tuning values, particularly when it comes to
-clock delays.  You can specify clock delay values by adding
-micrel-specific properties to an Ethernet OF device node.
-
-All skew control options are specified in picoseconds.  The minimum
-value is 0, and the maximum value is 3000.
-
-Optional properties:
- - rxc-skew-ps : Skew control of RXC pad
- - rxdv-skew-ps : Skew control of RX CTL pad
- - txc-skew-ps : Skew control of TXC pad
- - txen-skew-ps : Skew control of TX_CTL pad
- - rxd0-skew-ps : Skew control of RX data 0 pad
- - rxd1-skew-ps : Skew control of RX data 1 pad
- - rxd2-skew-ps : Skew control of RX data 2 pad
- - rxd3-skew-ps : Skew control of RX data 3 pad
- - txd0-skew-ps : Skew control of TX data 0 pad
- - txd1-skew-ps : Skew control of TX data 1 pad
- - txd2-skew-ps : Skew control of TX data 2 pad
- - txd3-skew-ps : Skew control of TX data 3 pad
-
-Examples:
-
-	/* Attach to an Ethernet device with autodetected PHY */
-	&enet {
-		rxc-skew-ps = <3000>;
-		rxdv-skew-ps = <0>;
-		txc-skew-ps = <3000>;
-		txen-skew-ps = <0>;
-		status = "okay";
-	};
-
-	/* Attach to an explicitly-specified PHY */
-	mdio {
-		phy0: ethernet-phy@0 {
-			rxc-skew-ps = <3000>;
-			rxdv-skew-ps = <0>;
-			txc-skew-ps = <3000>;
-			txen-skew-ps = <0>;
-			reg = <0>;
-		};
-	};
-	ethernet@70000 {
-		status = "okay";
-		phy = <&phy0>;
-		phy-mode = "rgmii-id";
-	};
diff --git a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
new file mode 100644
index 000000000000..692076fda0e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
@@ -0,0 +1,83 @@
+Micrel KSZ9021/KSZ9031 Gigabit Ethernet PHY
+
+Some boards require special tuning values, particularly when it comes to
+clock delays. You can specify clock delay values by adding
+micrel-specific properties to an Ethernet OF device node.
+
+Note that these settings are applied after any phy-specific fixup from
+phy_fixup_list (see phy_init_hw() from drivers/net/phy/phy_device.c),
+and therefore may overwrite them.
+
+KSZ9021:
+
+  All skew control options are specified in picoseconds. The minimum
+  value is 0, the maximum value is 3000, and it is incremented by 200ps
+  steps.
+
+  Optional properties:
+
+    - rxc-skew-ps : Skew control of RXC pad
+    - rxdv-skew-ps : Skew control of RX CTL pad
+    - txc-skew-ps : Skew control of TXC pad
+    - txen-skew-ps : Skew control of TX CTL pad
+    - rxd0-skew-ps : Skew control of RX data 0 pad
+    - rxd1-skew-ps : Skew control of RX data 1 pad
+    - rxd2-skew-ps : Skew control of RX data 2 pad
+    - rxd3-skew-ps : Skew control of RX data 3 pad
+    - txd0-skew-ps : Skew control of TX data 0 pad
+    - txd1-skew-ps : Skew control of TX data 1 pad
+    - txd2-skew-ps : Skew control of TX data 2 pad
+    - txd3-skew-ps : Skew control of TX data 3 pad
+
+KSZ9031:
+
+  All skew control options are specified in picoseconds. The minimum
+  value is 0, and the maximum is property-dependent. The increment
+  step is 60ps.
+
+  Optional properties:
+
+    Maximum value of 1860:
+
+      - rxc-skew-ps : Skew control of RX clock pad
+      - txc-skew-ps : Skew control of TX clock pad
+
+    Maximum value of 900:
+
+      - rxdv-skew-ps : Skew control of RX CTL pad
+      - txen-skew-ps : Skew control of TX CTL pad
+      - rxd0-skew-ps : Skew control of RX data 0 pad
+      - rxd1-skew-ps : Skew control of RX data 1 pad
+      - rxd2-skew-ps : Skew control of RX data 2 pad
+      - rxd3-skew-ps : Skew control of RX data 3 pad
+      - txd0-skew-ps : Skew control of TX data 0 pad
+      - txd1-skew-ps : Skew control of TX data 1 pad
+      - txd2-skew-ps : Skew control of TX data 2 pad
+      - txd3-skew-ps : Skew control of TX data 3 pad
+
+Examples:
+
+	/* Attach to an Ethernet device with autodetected PHY */
+	&enet {
+		rxc-skew-ps = <3000>;
+		rxdv-skew-ps = <0>;
+		txc-skew-ps = <3000>;
+		txen-skew-ps = <0>;
+		status = "okay";
+	};
+
+	/* Attach to an explicitly-specified PHY */
+	mdio {
+		phy0: ethernet-phy@0 {
+			rxc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			txen-skew-ps = <0>;
+			reg = <0>;
+		};
+	};
+	ethernet@70000 {
+		status = "okay";
+		phy = <&phy0>;
+		phy-mode = "rgmii-id";
+	};
diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt
new file mode 100644
index 000000000000..dab69f36167c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/pn544.txt
@@ -0,0 +1,35 @@
+* NXP Semiconductors PN544 NFC Controller
+
+Required properties:
+- compatible: Should be "nxp,pn544-i2c".
+- clock-frequency: I�C work frequency.
+- reg: address on the bus
+- interrupt-parent: phandle for the interrupt gpio controller
+- interrupts: GPIO interrupt to which the chip is connected
+- enable-gpios: Output GPIO pin used for enabling/disabling the PN544
+- firmware-gpios: Output GPIO pin used to enter firmware download mode
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBone with PN544 on I2C2):
+
+&i2c2 {
+
+	status = "okay";
+
+	pn544: pn544@28 {
+
+		compatible = "nxp,pn544-i2c";
+
+		reg = <0x28>;
+		clock-frequency = <400000>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <17 GPIO_ACTIVE_HIGH>;
+
+		enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
new file mode 100644
index 000000000000..e4faa2e8dfeb
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
@@ -0,0 +1,33 @@
+* STMicroelectronics SAS. ST21NFCA NFC Controller
+
+Required properties:
+- compatible: Should be "st,st21nfca_i2c".
+- clock-frequency: I²C work frequency.
+- reg: address on the bus
+- interrupt-parent: phandle for the interrupt gpio controller
+- interrupts: GPIO interrupt to which the chip is connected
+- enable-gpios: Output GPIO pin used for enabling/disabling the ST21NFCA
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):
+
+&i2c2 {
+
+	status = "okay";
+
+	st21nfca: st21nfca@1 {
+
+		compatible = "st,st21nfca_i2c";
+
+		reg = <0x01>;
+		clock-frequency = <400000>;
+
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
index 8dd3ef7bc56b..1e436133685f 100644
--- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
+++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
@@ -12,6 +12,7 @@ Required properties:
 Optional SoC Specific Properties:
 - pinctrl-names: Contains only one value - "default".
 - pintctrl-0: Specifies the pin control groups used for this controller.
+- autosuspend-delay: Specify autosuspend delay in milliseconds.
 
 Example (for ARM-based BeagleBone with TRF7970A on SPI1):
 
@@ -29,6 +30,7 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1):
 		ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>,
 				  <&gpio2 5 GPIO_ACTIVE_LOW>;
 		vin-supply = <&ldo3_reg>;
+		autosuspend-delay = <30000>;
 		status = "okay";
 	};
 };
diff --git a/Documentation/devicetree/bindings/net/via-rhine.txt b/Documentation/devicetree/bindings/net/via-rhine.txt
new file mode 100644
index 000000000000..334eca2bf937
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/via-rhine.txt
@@ -0,0 +1,17 @@
+* VIA Rhine 10/100 Network Controller
+
+Required properties:
+- compatible : Should be "via,vt8500-rhine" for integrated
+	Rhine controllers found in VIA VT8500, WonderMedia WM8950
+	and similar. These are listed as 1106:3106 rev. 0x84 on the
+	virtual PCI bus under vendor-provided kernels
+- reg : Address and length of the io space
+- interrupts : Should contain the controller interrupt line
+
+Examples:
+
+ethernet@d8004000 {
+	compatible = "via,vt8500-rhine";
+	reg = <0xd8004000 0x100>;
+	interrupts = <10>;
+};
diff --git a/Documentation/devicetree/bindings/panel/auo,b133xtn01.txt b/Documentation/devicetree/bindings/panel/auo,b133xtn01.txt
new file mode 100644
index 000000000000..7443b7c76769
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/auo,b133xtn01.txt
@@ -0,0 +1,7 @@
+AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,b133xtn01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/panel/edt,et057090dhu.txt b/Documentation/devicetree/bindings/panel/edt,et057090dhu.txt
new file mode 100644
index 000000000000..4903d7b1d947
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/edt,et057090dhu.txt
@@ -0,0 +1,7 @@
+Emerging Display Technology Corp. 5.7" VGA TFT LCD panel
+
+Required properties:
+- compatible: should be "edt,et057090dhu"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/panel/edt,et070080dh6.txt b/Documentation/devicetree/bindings/panel/edt,et070080dh6.txt
new file mode 100644
index 000000000000..20cb38e836e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/edt,et070080dh6.txt
@@ -0,0 +1,10 @@
+Emerging Display Technology Corp. ET070080DH6 7.0" WVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "edt,et070080dh6"
+
+This panel is the same as ETM0700G0DH6 except for the touchscreen.
+ET070080DH6 is the model with resistive touch.
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/panel/edt,etm0700g0dh6.txt b/Documentation/devicetree/bindings/panel/edt,etm0700g0dh6.txt
new file mode 100644
index 000000000000..ee4b18053e40
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/edt,etm0700g0dh6.txt
@@ -0,0 +1,10 @@
+Emerging Display Technology Corp. ETM0700G0DH6 7.0" WVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "edt,etm0700g0dh6"
+
+This panel is the same as ET070080DH6 except for the touchscreen.
+ETM0700G0DH6 is the model with capacitive multitouch.
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
index d6fae13ff062..d0d15ee42834 100644
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -1,15 +1,7 @@
 * Synopsys Designware PCIe interface
 
 Required properties:
-- compatible: should contain "snps,dw-pcie" to identify the
-	core, plus an identifier for the specific instance, such
-	as "samsung,exynos5440-pcie" or "fsl,imx6q-pcie".
-- reg: base addresses and lengths of the pcie controller,
-	the phy controller, additional register for the phy controller.
-- interrupts: interrupt values for level interrupt,
-	pulse interrupt, special interrupt.
-- clocks: from common clock binding: handle to pci clock.
-- clock-names: from common clock binding: should be "pcie" and "pcie_bus".
+- compatible: should contain "snps,dw-pcie" to identify the core.
 - #address-cells: set to <3>
 - #size-cells: set to <2>
 - device_type: set to "pci"
@@ -19,65 +11,11 @@ Required properties:
 	to define the mapping of the PCIe interface to interrupt
 	numbers.
 - num-lanes: number of lanes to use
+- clocks: Must contain an entry for each entry in clock-names.
+	See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+	- "pcie"
+	- "pcie_bus"
 
 Optional properties:
 - reset-gpio: gpio pin number of power good signal
-
-Optional properties for fsl,imx6q-pcie
-- power-on-gpio: gpio pin number of power-enable signal
-- wake-up-gpio: gpio pin number of incoming wakeup signal
-- disable-gpio: gpio pin number of outgoing rfkill/endpoint disable signal
-
-Example:
-
-SoC specific DT Entry:
-
-	pcie@290000 {
-		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
-		reg = <0x290000 0x1000
-			0x270000 0x1000
-			0x271000 0x40>;
-		interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
-		clocks = <&clock 28>, <&clock 27>;
-		clock-names = "pcie", "pcie_bus";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000   /* configuration space */
-			  0x81000000 0 0	  0x40001000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0x0 0 &gic 53>;
-		num-lanes = <4>;
-	};
-
-	pcie@2a0000 {
-		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
-		reg = <0x2a0000 0x1000
-			0x272000 0x1000
-			0x271040 0x40>;
-		interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
-		clocks = <&clock 29>, <&clock 27>;
-		clock-names = "pcie", "pcie_bus";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000   /* configuration space */
-			  0x81000000 0 0	  0x60001000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0x0 0 &gic 56>;
-		num-lanes = <4>;
-	};
-
-Board specific DT Entry:
-
-	pcie@290000 {
-		reset-gpio = <&pin_ctrl 5 0>;
-	};
-
-	pcie@2a0000 {
-		reset-gpio = <&pin_ctrl 22 0>;
-	};
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
new file mode 100644
index 000000000000..9455fd0ec830
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
@@ -0,0 +1,38 @@
+* Freescale i.MX6 PCIe interface
+
+This PCIe host controller is based on the Synopsis Designware PCIe IP
+and thus inherits all the common properties defined in designware-pcie.txt.
+
+Required properties:
+- compatible: "fsl,imx6q-pcie"
+- reg: base addresse and length of the pcie controller
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+  entry for each entry in the interrupt-names property.
+- interrupt-names: Must include the following entries:
+	- "msi": The interrupt that is asserted when an MSI is received
+- clock-names: Must include the following additional entries:
+	- "pcie_phy"
+
+Example:
+
+	pcie@0x01000000 {
+		compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
+		reg = <0x01ffc000 0x4000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000
+			  0x81000000 0 0          0x01f80000 0 0x00010000
+			  0x82000000 0 0x01000000 0x01000000 0 0x00f00000>;
+		num-lanes = <1>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks 144>, <&clks 206>, <&clks 189>;
+		clock-names = "pcie", "pcie_bus", "pcie_phy";
+	};
diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt b/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt
new file mode 100644
index 000000000000..4f9d23d2ed67
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt
@@ -0,0 +1,65 @@
+* Samsung Exynos 5440 PCIe interface
+
+This PCIe host controller is based on the Synopsis Designware PCIe IP
+and thus inherits all the common properties defined in designware-pcie.txt.
+
+Required properties:
+- compatible: "samsung,exynos5440-pcie"
+- reg: base addresses and lengths of the pcie controller,
+	the phy controller, additional register for the phy controller.
+- interrupts: A list of interrupt outputs for level interrupt,
+	pulse interrupt, special interrupt.
+
+Example:
+
+SoC specific DT Entry:
+
+	pcie@290000 {
+		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
+		reg = <0x290000 0x1000
+			0x270000 0x1000
+			0x271000 0x40>;
+		interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
+		clocks = <&clock 28>, <&clock 27>;
+		clock-names = "pcie", "pcie_bus";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000   /* configuration space */
+			  0x81000000 0 0	  0x40001000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		num-lanes = <4>;
+	};
+
+	pcie@2a0000 {
+		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
+		reg = <0x2a0000 0x1000
+			0x272000 0x1000
+			0x271040 0x40>;
+		interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
+		clocks = <&clock 29>, <&clock 27>;
+		clock-names = "pcie", "pcie_bus";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000   /* configuration space */
+			  0x81000000 0 0	  0x60001000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		num-lanes = <4>;
+	};
+
+Board specific DT Entry:
+
+	pcie@290000 {
+		reset-gpio = <&pin_ctrl 5 0>;
+	};
+
+	pcie@2a0000 {
+		reset-gpio = <&pin_ctrl 22 0>;
+	};
diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
index 57ccdde02c3a..53dbccfa80ca 100644
--- a/Documentation/devicetree/bindings/video/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
@@ -62,6 +62,10 @@ Optional properties for dp-controller:
 	-hsync-active-high:
 		HSYNC polarity configuration.
 			High if defined, Low if not defined
+	-samsung,hpd-gpio:
+		Hotplug detect GPIO.
+			Indicates which GPIO should be used for hotplug
+			detection
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
index f9187a259259..1fd8cf9cbfac 100644
--- a/Documentation/devicetree/bindings/video/exynos_hdmi.txt
+++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
@@ -5,6 +5,7 @@ Required properties:
 	1) "samsung,exynos5-hdmi" <DEPRECATED>
 	2) "samsung,exynos4210-hdmi"
 	3) "samsung,exynos4212-hdmi"
+	4) "samsung,exynos5420-hdmi"
 - reg: physical base address of the hdmi and length of memory mapped
 	region.
 - interrupts: interrupt number to the cpu.
@@ -27,6 +28,7 @@ Required properties:
 	"hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi".
 - ddc: phandle to the hdmi ddc node
 - phy: phandle to the hdmi phy node
+- samsung,syscon-phandle: phandle for system controller node for PMU.
 
 Example:
 
@@ -37,4 +39,5 @@ Example:
 		hpd-gpio = <&gpx3 7 1>;
 		ddc = <&hdmi_ddc_node>;
 		phy = <&hdmi_phy_node>;
+		samsung,syscon-phandle = <&pmu_system_controller>;
 	};
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index 89472558011e..1525e30483fd 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -318,3 +318,8 @@ GPIO
   devm_gpiod_get_optional()
   devm_gpiod_get_index_optional()
   devm_gpiod_put()
+
+MDIO
+  devm_mdiobus_alloc()
+  devm_mdiobus_alloc_size()
+  devm_mdiobus_free()
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index eba790134253..b18dd1779029 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -196,8 +196,7 @@ prototypes:
 	void (*invalidatepage) (struct page *, unsigned int, unsigned int);
 	int (*releasepage) (struct page *, int);
 	void (*freepage)(struct page *);
-	int (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
-			loff_t offset, unsigned long nr_segs);
+	int (*direct_IO)(int, struct kiocb *, struct iov_iter *iter, loff_t offset);
 	int (*get_xip_mem)(struct address_space *, pgoff_t, int, void **,
 				unsigned long *);
 	int (*migratepage)(struct address_space *, struct page *, struct page *);
@@ -431,6 +430,8 @@ prototypes:
 	ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *);
 	ssize_t (*aio_read) (struct kiocb *, const struct iovec *, unsigned long, loff_t);
 	ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t);
+	ssize_t (*read_iter) (struct kiocb *, struct iov_iter *);
+	ssize_t (*write_iter) (struct kiocb *, struct iov_iter *);
 	int (*iterate) (struct file *, struct dir_context *);
 	unsigned int (*poll) (struct file *, struct poll_table_struct *);
 	long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index 617f6d70c077..a1d0d7a30165 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -589,8 +589,7 @@ struct address_space_operations {
 	void (*invalidatepage) (struct page *, unsigned int, unsigned int);
 	int (*releasepage) (struct page *, int);
 	void (*freepage)(struct page *);
-	ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
-			loff_t offset, unsigned long nr_segs);
+	ssize_t (*direct_IO)(int, struct kiocb *, struct iov_iter *iter, loff_t offset);
 	struct page* (*get_xip_page)(struct address_space *, sector_t,
 			int);
 	/* migrate the contents of a page to the specified target */
@@ -807,6 +806,8 @@ struct file_operations {
 	ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *);
 	ssize_t (*aio_read) (struct kiocb *, const struct iovec *, unsigned long, loff_t);
 	ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t);
+	ssize_t (*read_iter) (struct kiocb *, struct iov_iter *);
+	ssize_t (*write_iter) (struct kiocb *, struct iov_iter *);
 	int (*iterate) (struct file *, struct dir_context *);
 	unsigned int (*poll) (struct file *, struct poll_table_struct *);
 	long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
@@ -837,11 +838,15 @@ otherwise noted.
 
   read: called by read(2) and related system calls
 
-  aio_read: called by io_submit(2) and other asynchronous I/O operations
+  aio_read: vectored, possibly asynchronous read
+
+  read_iter: possibly asynchronous read with iov_iter as destination
 
   write: called by write(2) and related system calls
 
-  aio_write: called by io_submit(2) and other asynchronous I/O operations
+  aio_write: vectored, possibly asynchronous write
+
+  write_iter: possibly asynchronous write with iov_iter as source
 
   iterate: called when the VFS needs to read the directory contents
 
diff --git a/Documentation/hwmon/shtc1 b/Documentation/hwmon/shtc1
new file mode 100644
index 000000000000..6b1e05458f0f
--- /dev/null
+++ b/Documentation/hwmon/shtc1
@@ -0,0 +1,43 @@
+Kernel driver shtc1
+===================
+
+Supported chips:
+  * Sensirion SHTC1
+    Prefix: 'shtc1'
+    Addresses scanned: none
+    Datasheet: http://www.sensirion.com/file/datasheet_shtc1
+
+  * Sensirion SHTW1
+    Prefix: 'shtw1'
+    Addresses scanned: none
+    Datasheet: Not publicly available
+
+Author:
+  Johannes Winkelmann <johannes.winkelmann@sensirion.com>
+
+Description
+-----------
+
+This driver implements support for the Sensirion SHTC1 chip, a humidity and
+temperature sensor. Temperature is measured in degrees celsius, relative
+humidity is expressed as a percentage. Driver can be used as well for SHTW1
+chip, which has the same electrical interface.
+
+The device communicates with the I2C protocol. All sensors are set to I2C
+address 0x70. See Documentation/i2c/instantiating-devices for methods to
+instantiate the device.
+
+There are two options configurable by means of shtc1_platform_data:
+1. blocking (pull the I2C clock line down while performing the measurement) or
+   non-blocking mode. Blocking mode will guarantee the fastest result but
+   the I2C bus will be busy during that time. By default, non-blocking mode
+   is used. Make sure clock-stretching works properly on your device if you
+   want to use blocking mode.
+2. high or low accuracy. High accuracy is used by default and using it is
+   strongly recommended.
+
+sysfs-Interface
+---------------
+
+temp1_input - temperature input
+humidity1_input - humidity input
diff --git a/Documentation/kbuild/modules.txt b/Documentation/kbuild/modules.txt
index 69372fb98cf8..3fb39e0116b4 100644
--- a/Documentation/kbuild/modules.txt
+++ b/Documentation/kbuild/modules.txt
@@ -470,7 +470,7 @@ build.
 
 	Sometimes, an external module uses exported symbols from
 	another external module. kbuild needs to have full knowledge of
-	all symbols to avoid spliitting out warnings about undefined
+	all symbols to avoid spitting out warnings about undefined
 	symbols. Three solutions exist for this situation.
 
 	NOTE: The method with a top-level kbuild file is recommended
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index b9f67781c577..6eaa9cdb7094 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1,27 +1,37 @@
                           Kernel Parameters
                           ~~~~~~~~~~~~~~~~~
 
-The following is a consolidated list of the kernel parameters as implemented
-(mostly) by the __setup() macro and sorted into English Dictionary order
-(defined as ignoring all punctuation and sorting digits before letters in a
-case insensitive manner), and with descriptions where known.
-
-Module parameters for loadable modules are specified only as the
-parameter name with optional '=' and value as appropriate, such as:
-
-	modprobe usbcore blinkenlights=1
-
-Module parameters for modules that are built into the kernel image
-are specified on the kernel command line with the module name plus
-'.' plus parameter name, with '=' and value if appropriate, such as:
-
-	usbcore.blinkenlights=1
+The following is a consolidated list of the kernel parameters as
+implemented by the __setup(), core_param() and module_param() macros
+and sorted into English Dictionary order (defined as ignoring all
+punctuation and sorting digits before letters in a case insensitive
+manner), and with descriptions where known.
+
+The kernel parses parameters from the kernel command line up to "--";
+if it doesn't recognize a parameter and it doesn't contain a '.', the
+parameter gets passed to init: parameters with '=' go into init's
+environment, others are passed as command line arguments to init.
+Everything after "--" is passed as an argument to init.
+
+Module parameters can be specified in two ways: via the kernel command
+line with a module name prefix, or via modprobe, e.g.:
+
+	(kernel command line) usbcore.blinkenlights=1
+	(modprobe command line) modprobe usbcore blinkenlights=1
+
+Parameters for modules which are built into the kernel need to be
+specified on the kernel command line.  modprobe looks through the
+kernel command line (/proc/cmdline) and collects module parameters
+when it loads a module, so the kernel command line can be used for
+loadable modules too.
 
 Hyphens (dashes) and underscores are equivalent in parameter names, so
 	log_buf_len=1M print-fatal-signals=1
 can also be entered as
 	log-buf-len=1M print_fatal_signals=1
 
+Double-quotes can be used to protect spaces in values, e.g.:
+	param="spaces in here"
 
 This document may not be entirely up to date and comprehensive. The command
 "modinfo -p ${modulename}" shows a current list of all parameters of a loadable
diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index 0cfb00fd86ff..4bbeca8483ed 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -22,8 +22,9 @@ Appendix B: The kprobes sysctl interface
 
 Kprobes enables you to dynamically break into any kernel routine and
 collect debugging and performance information non-disruptively. You
-can trap at almost any kernel code address, specifying a handler
+can trap at almost any kernel code address(*), specifying a handler
 routine to be invoked when the breakpoint is hit.
+(*: some parts of the kernel code can not be trapped, see 1.5 Blacklist)
 
 There are currently three types of probes: kprobes, jprobes, and
 kretprobes (also called return probes).  A kprobe can be inserted
@@ -273,6 +274,19 @@ using one of the following techniques:
  or
 - Execute 'sysctl -w debug.kprobes_optimization=n'
 
+1.5 Blacklist
+
+Kprobes can probe most of the kernel except itself. This means
+that there are some functions where kprobes cannot probe. Probing
+(trapping) such functions can cause a recursive trap (e.g. double
+fault) or the nested probe handler may never be called.
+Kprobes manages such functions as a blacklist.
+If you want to add a function into the blacklist, you just need
+to (1) include linux/kprobes.h and (2) use NOKPROBE_SYMBOL() macro
+to specify a blacklisted function.
+Kprobes checks the given probe address against the blacklist and
+rejects registering it, if the given address is in the blacklist.
+
 2. Architectures Supported
 
 Kprobes, jprobes, and return probes are implemented on the following
diff --git a/Documentation/mutex-design.txt b/Documentation/mutex-design.txt
index 1dfe62c3641d..ee231ed09ec6 100644
--- a/Documentation/mutex-design.txt
+++ b/Documentation/mutex-design.txt
@@ -1,139 +1,157 @@
 Generic Mutex Subsystem
 
 started by Ingo Molnar <mingo@redhat.com>
+updated by Davidlohr Bueso <davidlohr@hp.com>
 
-  "Why on earth do we need a new mutex subsystem, and what's wrong
-   with semaphores?"
+What are mutexes?
+-----------------
 
-firstly, there's nothing wrong with semaphores. But if the simpler
-mutex semantics are sufficient for your code, then there are a couple
-of advantages of mutexes:
+In the Linux kernel, mutexes refer to a particular locking primitive
+that enforces serialization on shared memory systems, and not only to
+the generic term referring to 'mutual exclusion' found in academia
+or similar theoretical text books. Mutexes are sleeping locks which
+behave similarly to binary semaphores, and were introduced in 2006[1]
+as an alternative to these. This new data structure provided a number
+of advantages, including simpler interfaces, and at that time smaller
+code (see Disadvantages).
 
- - 'struct mutex' is smaller on most architectures: E.g. on x86,
-   'struct semaphore' is 20 bytes, 'struct mutex' is 16 bytes.
-   A smaller structure size means less RAM footprint, and better
-   CPU-cache utilization.
+[1] http://lwn.net/Articles/164802/
 
- - tighter code. On x86 i get the following .text sizes when
-   switching all mutex-alike semaphores in the kernel to the mutex
-   subsystem:
+Implementation
+--------------
 
-        text    data     bss     dec     hex filename
-     3280380  868188  396860 4545428  455b94 vmlinux-semaphore
-     3255329  865296  396732 4517357  44eded vmlinux-mutex
+Mutexes are represented by 'struct mutex', defined in include/linux/mutex.h
+and implemented in kernel/locking/mutex.c. These locks use a three
+state atomic counter (->count) to represent the different possible
+transitions that can occur during the lifetime of a lock:
 
-   that's 25051 bytes of code saved, or a 0.76% win - off the hottest
-   codepaths of the kernel. (The .data savings are 2892 bytes, or 0.33%)
-   Smaller code means better icache footprint, which is one of the
-   major optimization goals in the Linux kernel currently.
+	  1: unlocked
+	  0: locked, no waiters
+   negative: locked, with potential waiters
 
- - the mutex subsystem is slightly faster and has better scalability for
-   contended workloads. On an 8-way x86 system, running a mutex-based
-   kernel and testing creat+unlink+close (of separate, per-task files)
-   in /tmp with 16 parallel tasks, the average number of ops/sec is:
+In its most basic form it also includes a wait-queue and a spinlock
+that serializes access to it. CONFIG_SMP systems can also include
+a pointer to the lock task owner (->owner) as well as a spinner MCS
+lock (->osq), both described below in (ii).
 
-    Semaphores:                        Mutexes:
+When acquiring a mutex, there are three possible paths that can be
+taken, depending on the state of the lock:
 
-    $ ./test-mutex V 16 10             $ ./test-mutex V 16 10
-    8 CPUs, running 16 tasks.          8 CPUs, running 16 tasks.
-    checking VFS performance.          checking VFS performance.
-    avg loops/sec:      34713          avg loops/sec:      84153
-    CPU utilization:    63%            CPU utilization:    22%
+(i) fastpath: tries to atomically acquire the lock by decrementing the
+    counter. If it was already taken by another task it goes to the next
+    possible path. This logic is architecture specific. On x86-64, the
+    locking fastpath is 2 instructions:
 
-   i.e. in this workload, the mutex based kernel was 2.4 times faster
-   than the semaphore based kernel, _and_ it also had 2.8 times less CPU
-   utilization. (In terms of 'ops per CPU cycle', the semaphore kernel
-   performed 551 ops/sec per 1% of CPU time used, while the mutex kernel
-   performed 3825 ops/sec per 1% of CPU time used - it was 6.9 times
-   more efficient.)
-
-   the scalability difference is visible even on a 2-way P4 HT box:
-
-    Semaphores:                        Mutexes:
-
-    $ ./test-mutex V 16 10             $ ./test-mutex V 16 10
-    4 CPUs, running 16 tasks.          8 CPUs, running 16 tasks.
-    checking VFS performance.          checking VFS performance.
-    avg loops/sec:      127659         avg loops/sec:      181082
-    CPU utilization:    100%           CPU utilization:    34%
-
-   (the straight performance advantage of mutexes is 41%, the per-cycle
-    efficiency of mutexes is 4.1 times better.)
-
- - there are no fastpath tradeoffs, the mutex fastpath is just as tight
-   as the semaphore fastpath. On x86, the locking fastpath is 2
-   instructions:
-
-    c0377ccb <mutex_lock>:
-    c0377ccb:       f0 ff 08                lock decl (%eax)
-    c0377cce:       78 0e                   js     c0377cde <.text..lock.mutex>
-    c0377cd0:       c3                      ret
+    0000000000000e10 <mutex_lock>:
+    e21:   f0 ff 0b                lock decl (%rbx)
+    e24:   79 08                   jns    e2e <mutex_lock+0x1e>
 
    the unlocking fastpath is equally tight:
 
-    c0377cd1 <mutex_unlock>:
-    c0377cd1:       f0 ff 00                lock incl (%eax)
-    c0377cd4:       7e 0f                   jle    c0377ce5 <.text..lock.mutex+0x7>
-    c0377cd6:       c3                      ret
-
- - 'struct mutex' semantics are well-defined and are enforced if
-   CONFIG_DEBUG_MUTEXES is turned on. Semaphores on the other hand have
-   virtually no debugging code or instrumentation. The mutex subsystem
-   checks and enforces the following rules:
-
-   * - only one task can hold the mutex at a time
-   * - only the owner can unlock the mutex
-   * - multiple unlocks are not permitted
-   * - recursive locking is not permitted
-   * - a mutex object must be initialized via the API
-   * - a mutex object must not be initialized via memset or copying
-   * - task may not exit with mutex held
-   * - memory areas where held locks reside must not be freed
-   * - held mutexes must not be reinitialized
-   * - mutexes may not be used in hardware or software interrupt
-   *   contexts such as tasklets and timers
-
-   furthermore, there are also convenience features in the debugging
-   code:
-
-   * - uses symbolic names of mutexes, whenever they are printed in debug output
-   * - point-of-acquire tracking, symbolic lookup of function names
-   * - list of all locks held in the system, printout of them
-   * - owner tracking
-   * - detects self-recursing locks and prints out all relevant info
-   * - detects multi-task circular deadlocks and prints out all affected
-   *   locks and tasks (and only those tasks)
+    0000000000000bc0 <mutex_unlock>:
+    bc8:   f0 ff 07                lock incl (%rdi)
+    bcb:   7f 0a                   jg     bd7 <mutex_unlock+0x17>
+
+
+(ii) midpath: aka optimistic spinning, tries to spin for acquisition
+     while the lock owner is running and there are no other tasks ready
+     to run that have higher priority (need_resched). The rationale is
+     that if the lock owner is running, it is likely to release the lock
+     soon. The mutex spinners are queued up using MCS lock so that only
+     one spinner can compete for the mutex.
+
+     The MCS lock (proposed by Mellor-Crummey and Scott) is a simple spinlock
+     with the desirable properties of being fair and with each cpu trying
+     to acquire the lock spinning on a local variable. It avoids expensive
+     cacheline bouncing that common test-and-set spinlock implementations
+     incur. An MCS-like lock is specially tailored for optimistic spinning
+     for sleeping lock implementation. An important feature of the customized
+     MCS lock is that it has the extra property that spinners are able to exit
+     the MCS spinlock queue when they need to reschedule. This further helps
+     avoid situations where MCS spinners that need to reschedule would continue
+     waiting to spin on mutex owner, only to go directly to slowpath upon
+     obtaining the MCS lock.
+
+
+(iii) slowpath: last resort, if the lock is still unable to be acquired,
+      the task is added to the wait-queue and sleeps until woken up by the
+      unlock path. Under normal circumstances it blocks as TASK_UNINTERRUPTIBLE.
+
+While formally kernel mutexes are sleepable locks, it is path (ii) that
+makes them more practically a hybrid type. By simply not interrupting a
+task and busy-waiting for a few cycles instead of immediately sleeping,
+the performance of this lock has been seen to significantly improve a
+number of workloads. Note that this technique is also used for rw-semaphores.
+
+Semantics
+---------
+
+The mutex subsystem checks and enforces the following rules:
+
+    - Only one task can hold the mutex at a time.
+    - Only the owner can unlock the mutex.
+    - Multiple unlocks are not permitted.
+    - Recursive locking/unlocking is not permitted.
+    - A mutex must only be initialized via the API (see below).
+    - A task may not exit with a mutex held.
+    - Memory areas where held locks reside must not be freed.
+    - Held mutexes must not be reinitialized.
+    - Mutexes may not be used in hardware or software interrupt
+      contexts such as tasklets and timers.
+
+These semantics are fully enforced when CONFIG DEBUG_MUTEXES is enabled.
+In addition, the mutex debugging code also implements a number of other
+features that make lock debugging easier and faster:
+
+    - Uses symbolic names of mutexes, whenever they are printed
+      in debug output.
+    - Point-of-acquire tracking, symbolic lookup of function names,
+      list of all locks held in the system, printout of them.
+    - Owner tracking.
+    - Detects self-recursing locks and prints out all relevant info.
+    - Detects multi-task circular deadlocks and prints out all affected
+      locks and tasks (and only those tasks).
+
+
+Interfaces
+----------
+Statically define the mutex:
+   DEFINE_MUTEX(name);
+
+Dynamically initialize the mutex:
+   mutex_init(mutex);
+
+Acquire the mutex, uninterruptible:
+   void mutex_lock(struct mutex *lock);
+   void mutex_lock_nested(struct mutex *lock, unsigned int subclass);
+   int  mutex_trylock(struct mutex *lock);
+
+Acquire the mutex, interruptible:
+   int mutex_lock_interruptible_nested(struct mutex *lock,
+				       unsigned int subclass);
+   int mutex_lock_interruptible(struct mutex *lock);
+
+Acquire the mutex, interruptible, if dec to 0:
+   int atomic_dec_and_mutex_lock(atomic_t *cnt, struct mutex *lock);
+
+Unlock the mutex:
+   void mutex_unlock(struct mutex *lock);
+
+Test if the mutex is taken:
+   int mutex_is_locked(struct mutex *lock);
 
 Disadvantages
 -------------
 
-The stricter mutex API means you cannot use mutexes the same way you
-can use semaphores: e.g. they cannot be used from an interrupt context,
-nor can they be unlocked from a different context that which acquired
-it. [ I'm not aware of any other (e.g. performance) disadvantages from
-using mutexes at the moment, please let me know if you find any. ]
-
-Implementation of mutexes
--------------------------
-
-'struct mutex' is the new mutex type, defined in include/linux/mutex.h and
-implemented in kernel/locking/mutex.c. It is a counter-based mutex with a
-spinlock and a wait-list. The counter has 3 states: 1 for "unlocked", 0 for
-"locked" and negative numbers (usually -1) for "locked, potential waiters
-queued".
-
-the APIs of 'struct mutex' have been streamlined:
-
- DEFINE_MUTEX(name);
+Unlike its original design and purpose, 'struct mutex' is larger than
+most locks in the kernel. E.g: on x86-64 it is 40 bytes, almost twice
+as large as 'struct semaphore' (24 bytes) and 8 bytes shy of the
+'struct rw_semaphore' variant. Larger structure sizes mean more CPU
+cache and memory footprint.
 
- mutex_init(mutex);
+When to use mutexes
+-------------------
 
- void mutex_lock(struct mutex *lock);
- int  mutex_lock_interruptible(struct mutex *lock);
- int  mutex_trylock(struct mutex *lock);
- void mutex_unlock(struct mutex *lock);
- int  mutex_is_locked(struct mutex *lock);
- void mutex_lock_nested(struct mutex *lock, unsigned int subclass);
- int  mutex_lock_interruptible_nested(struct mutex *lock,
-                                      unsigned int subclass);
- int atomic_dec_and_mutex_lock(atomic_t *cnt, struct mutex *lock);
+Unless the strict semantics of mutexes are unsuitable and/or the critical
+region prevents the lock from being shared, always prefer them to any other
+locking primitive.
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index a383c00392d0..9c723ecd0025 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -585,13 +585,19 @@ mode
 	balance-tlb or 5
 
 		Adaptive transmit load balancing: channel bonding that
-		does not require any special switch support.  The
-		outgoing traffic is distributed according to the
-		current load (computed relative to the speed) on each
-		slave.  Incoming traffic is received by the current
-		slave.  If the receiving slave fails, another slave
-		takes over the MAC address of the failed receiving
-		slave.
+		does not require any special switch support.
+
+		In tlb_dynamic_lb=1 mode; the outgoing traffic is
+		distributed according to the current load (computed
+		relative to the speed) on each slave.
+
+		In tlb_dynamic_lb=0 mode; the load balancing based on
+		current load is disabled and the load is distributed
+		only using the hash distribution.
+
+		Incoming traffic is received by the current slave.
+		If the receiving slave fails, another slave takes over
+		the MAC address of the failed receiving slave.
 
 		Prerequisite:
 
@@ -736,6 +742,28 @@ primary_reselect
 
 	This option was added for bonding version 3.6.0.
 
+tlb_dynamic_lb
+
+	Specifies if dynamic shuffling of flows is enabled in tlb
+	mode. The value has no effect on any other modes.
+
+	The default behavior of tlb mode is to shuffle active flows across
+	slaves based on the load in that interval. This gives nice lb
+	characteristics but can cause packet reordering. If re-ordering is
+	a concern use this variable to disable flow shuffling and rely on
+	load balancing provided solely by the hash distribution.
+	xmit-hash-policy can be used to select the appropriate hashing for
+	the setup.
+
+	The sysfs entry can be used to change the setting per bond device
+	and the initial value is derived from the module parameter. The
+	sysfs entry is allowed to be changed only if the bond device is
+	down.
+
+	The default value is "1" that enables flow shuffling while value "0"
+	disables it. This option was added in bonding driver 3.7.1
+
+
 updelay
 
 	Specifies the time, in milliseconds, to wait before enabling a
@@ -769,7 +797,7 @@ use_carrier
 xmit_hash_policy
 
 	Selects the transmit hash policy to use for slave selection in
-	balance-xor and 802.3ad modes.  Possible values are:
+	balance-xor, 802.3ad, and tlb modes.  Possible values are:
 
 	layer2
 
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index 4f7ae5261364..2236d6dcb7da 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -469,6 +469,41 @@ solution for a couple of reasons:
   having this 'send only' use-case we may remove the receive list in the
   Kernel to save a little (really a very little!) CPU usage.
 
+  4.1.1.1 CAN filter usage optimisation
+
+  The CAN filters are processed in per-device filter lists at CAN frame
+  reception time. To reduce the number of checks that need to be performed
+  while walking through the filter lists the CAN core provides an optimized
+  filter handling when the filter subscription focusses on a single CAN ID.
+
+  For the possible 2048 SFF CAN identifiers the identifier is used as an index
+  to access the corresponding subscription list without any further checks.
+  For the 2^29 possible EFF CAN identifiers a 10 bit XOR folding is used as
+  hash function to retrieve the EFF table index.
+
+  To benefit from the optimized filters for single CAN identifiers the
+  CAN_SFF_MASK or CAN_EFF_MASK have to be set into can_filter.mask together
+  with set CAN_EFF_FLAG and CAN_RTR_FLAG bits. A set CAN_EFF_FLAG bit in the
+  can_filter.mask makes clear that it matters whether a SFF or EFF CAN ID is
+  subscribed. E.g. in the example from above
+
+    rfilter[0].can_id   = 0x123;
+    rfilter[0].can_mask = CAN_SFF_MASK;
+
+  both SFF frames with CAN ID 0x123 and EFF frames with 0xXXXXX123 can pass.
+
+  To filter for only 0x123 (SFF) and 0x12345678 (EFF) CAN identifiers the
+  filter has to be defined in this way to benefit from the optimized filters:
+
+    struct can_filter rfilter[2];
+
+    rfilter[0].can_id   = 0x123;
+    rfilter[0].can_mask = (CAN_EFF_FLAG | CAN_RTR_FLAG | CAN_SFF_MASK);
+    rfilter[1].can_id   = 0x12345678 | CAN_EFF_FLAG;
+    rfilter[1].can_mask = (CAN_EFF_FLAG | CAN_RTR_FLAG | CAN_EFF_MASK);
+
+    setsockopt(s, SOL_CAN_RAW, CAN_RAW_FILTER, &rfilter, sizeof(rfilter));
+
   4.1.2 RAW socket option CAN_RAW_ERR_FILTER
 
   As described in chapter 3.4 the CAN interface driver can generate so
diff --git a/Documentation/networking/cdc_mbim.txt b/Documentation/networking/cdc_mbim.txt
new file mode 100644
index 000000000000..a15ea602aa52
--- /dev/null
+++ b/Documentation/networking/cdc_mbim.txt
@@ -0,0 +1,339 @@
+     cdc_mbim - Driver for CDC MBIM Mobile Broadband modems
+    ========================================================
+
+The cdc_mbim driver supports USB devices conforming to the "Universal
+Serial Bus Communications Class Subclass Specification for Mobile
+Broadband Interface Model" [1], which is a further development of
+"Universal Serial Bus Communications Class Subclass Specifications for
+Network Control Model Devices" [2] optimized for Mobile Broadband
+devices, aka "3G/LTE modems".
+
+
+Command Line Parameters
+=======================
+
+The cdc_mbim driver has no parameters of its own.  But the probing
+behaviour for NCM 1.0 backwards compatible MBIM functions (an
+"NCM/MBIM function" as defined in section 3.2 of [1]) is affected
+by a cdc_ncm driver parameter:
+
+prefer_mbim
+-----------
+Type:          Boolean
+Valid Range:   N/Y (0-1)
+Default Value: Y (MBIM is preferred)
+
+This parameter sets the system policy for NCM/MBIM functions.  Such
+functions will be handled by either the cdc_ncm driver or the cdc_mbim
+driver depending on the prefer_mbim setting.  Setting prefer_mbim=N
+makes the cdc_mbim driver ignore these functions and lets the cdc_ncm
+driver handle them instead.
+
+The parameter is writable, and can be changed at any time. A manual
+unbind/bind is required to make the change effective for NCM/MBIM
+functions bound to the "wrong" driver
+
+
+Basic usage
+===========
+
+MBIM functions are inactive when unmanaged. The cdc_mbim driver only
+provides an userspace interface to the MBIM control channel, and will
+not participate in the management of the function. This implies that a
+userspace MBIM management application always is required to enable a
+MBIM function.
+
+Such userspace applications includes, but are not limited to:
+ - mbimcli (included with the libmbim [3] library), and
+ - ModemManager [4]
+
+Establishing a MBIM IP session reequires at least these actions by the
+management application:
+ - open the control channel
+ - configure network connection settings
+ - connect to network
+ - configure IP interface
+
+Management application development
+----------------------------------
+The driver <-> userspace interfaces are described below.  The MBIM
+control channel protocol is described in [1].
+
+
+MBIM control channel userspace ABI
+==================================
+
+/dev/cdc-wdmX character device
+------------------------------
+The driver creates a two-way pipe to the MBIM function control channel
+using the cdc-wdm driver as a subdriver.  The userspace end of the
+control channel pipe is a /dev/cdc-wdmX character device.
+
+The cdc_mbim driver does not process or police messages on the control
+channel.  The channel is fully delegated to the userspace management
+application.  It is therefore up to this application to ensure that it
+complies with all the control channel requirements in [1].
+
+The cdc-wdmX device is created as a child of the MBIM control
+interface USB device.  The character device associated with a specific
+MBIM function can be looked up using sysfs.  For example:
+
+ bjorn@nemi:~$ ls /sys/bus/usb/drivers/cdc_mbim/2-4:2.12/usbmisc
+ cdc-wdm0
+
+ bjorn@nemi:~$ grep . /sys/bus/usb/drivers/cdc_mbim/2-4:2.12/usbmisc/cdc-wdm0/dev
+ 180:0
+
+
+USB configuration descriptors
+-----------------------------
+The wMaxControlMessage field of the CDC MBIM functional descriptor
+limits the maximum control message size. The managament application is
+responsible for negotiating a control message size complying with the
+requirements in section 9.3.1 of [1], taking this descriptor field
+into consideration.
+
+The userspace application can access the CDC MBIM functional
+descriptor of a MBIM function using either of the two USB
+configuration descriptor kernel interfaces described in [6] or [7].
+
+See also the ioctl documentation below.
+
+
+Fragmentation
+-------------
+The userspace application is responsible for all control message
+fragmentation and defragmentaion, as described in section 9.5 of [1].
+
+
+/dev/cdc-wdmX write()
+---------------------
+The MBIM control messages from the management application *must not*
+exceed the negotiated control message size.
+
+
+/dev/cdc-wdmX read()
+--------------------
+The management application *must* accept control messages of up the
+negotiated control message size.
+
+
+/dev/cdc-wdmX ioctl()
+--------------------
+IOCTL_WDM_MAX_COMMAND: Get Maximum Command Size
+This ioctl returns the wMaxControlMessage field of the CDC MBIM
+functional descriptor for MBIM devices.  This is intended as a
+convenience, eliminating the need to parse the USB descriptors from
+userspace.
+
+	#include <stdio.h>
+	#include <fcntl.h>
+	#include <sys/ioctl.h>
+	#include <linux/types.h>
+	#include <linux/usb/cdc-wdm.h>
+	int main()
+	{
+		__u16 max;
+		int fd = open("/dev/cdc-wdm0", O_RDWR);
+		if (!ioctl(fd, IOCTL_WDM_MAX_COMMAND, &max))
+			printf("wMaxControlMessage is %d\n", max);
+	}
+
+
+Custom device services
+----------------------
+The MBIM specification allows vendors to freely define additional
+services.  This is fully supported by the cdc_mbim driver.
+
+Support for new MBIM services, including vendor specified services, is
+implemented entirely in userspace, like the rest of the MBIM control
+protocol
+
+New services should be registered in the MBIM Registry [5].
+
+
+
+MBIM data channel userspace ABI
+===============================
+
+wwanY network device
+--------------------
+The cdc_mbim driver represents the MBIM data channel as a single
+network device of the "wwan" type. This network device is initially
+mapped to MBIM IP session 0.
+
+
+Multiplexed IP sessions (IPS)
+-----------------------------
+MBIM allows multiplexing up to 256 IP sessions over a single USB data
+channel.  The cdc_mbim driver models such IP sessions as 802.1q VLAN
+subdevices of the master wwanY device, mapping MBIM IP session Z to
+VLAN ID Z for all values of Z greater than 0.
+
+The device maximum Z is given in the MBIM_DEVICE_CAPS_INFO structure
+described in section 10.5.1 of [1].
+
+The userspace management application is responsible for adding new
+VLAN links prior to establishing MBIM IP sessions where the SessionId
+is greater than 0. These links can be added by using the normal VLAN
+kernel interfaces, either ioctl or netlink.
+
+For example, adding a link for a MBIM IP session with SessionId 3:
+
+  ip link add link wwan0 name wwan0.3 type vlan id 3
+
+The driver will automatically map the "wwan0.3" network device to MBIM
+IP session 3.
+
+
+Device Service Streams (DSS)
+----------------------------
+MBIM also allows up to 256 non-IP data streams to be multiplexed over
+the same shared USB data channel.  The cdc_mbim driver models these
+sessions as another set of 802.1q VLAN subdevices of the master wwanY
+device, mapping MBIM DSS session A to VLAN ID (256 + A) for all values
+of A.
+
+The device maximum A is given in the MBIM_DEVICE_SERVICES_INFO
+structure described in section 10.5.29 of [1].
+
+The DSS VLAN subdevices are used as a practical interface between the
+shared MBIM data channel and a MBIM DSS aware userspace application.
+It is not intended to be presented as-is to an end user. The
+assumption is that an userspace application initiating a DSS session
+also takes care of the necessary framing of the DSS data, presenting
+the stream to the end user in an appropriate way for the stream type.
+
+The network device ABI requires a dummy ethernet header for every DSS
+data frame being transported.  The contents of this header is
+arbitrary, with the following exceptions:
+ - TX frames using an IP protocol (0x0800 or 0x86dd) will be dropped
+ - RX frames will have the protocol field set to ETH_P_802_3 (but will
+   not be properly formatted 802.3 frames)
+ - RX frames will have the destination address set to the hardware
+   address of the master device
+
+The DSS supporting userspace management application is responsible for
+adding the dummy ethernet header on TX and stripping it on RX.
+
+This is a simple example using tools commonly available, exporting
+DssSessionId 5 as a pty character device pointed to by a /dev/nmea
+symlink:
+
+  ip link add link wwan0 name wwan0.dss5 type vlan id 261
+  ip link set dev wwan0.dss5 up
+  socat INTERFACE:wwan0.dss5,type=2 PTY:,echo=0,link=/dev/nmea
+
+This is only an example, most suitable for testing out a DSS
+service. Userspace applications supporting specific MBIM DSS services
+are expected to use the tools and programming interfaces required by
+that service.
+
+Note that adding VLAN links for DSS sessions is entirely optional.  A
+management application may instead choose to bind a packet socket
+directly to the master network device, using the received VLAN tags to
+map frames to the correct DSS session and adding 18 byte VLAN ethernet
+headers with the appropriate tag on TX.  In this case using a socket
+filter is recommended, matching only the DSS VLAN subset. This avoid
+unnecessary copying of unrelated IP session data to userspace.  For
+example:
+
+  static struct sock_filter dssfilter[] = {
+	/* use special negative offsets to get VLAN tag */
+	BPF_STMT(BPF_LD|BPF_B|BPF_ABS, SKF_AD_OFF + SKF_AD_VLAN_TAG_PRESENT),
+	BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, 1, 0, 6), /* true */
+
+	/* verify DSS VLAN range */
+	BPF_STMT(BPF_LD|BPF_H|BPF_ABS, SKF_AD_OFF + SKF_AD_VLAN_TAG),
+	BPF_JUMP(BPF_JMP|BPF_JGE|BPF_K, 256, 0, 4),	/* 256 is first DSS VLAN */
+	BPF_JUMP(BPF_JMP|BPF_JGE|BPF_K, 512, 3, 0),	/* 511 is last DSS VLAN */
+
+	/* verify ethertype */
+        BPF_STMT(BPF_LD|BPF_H|BPF_ABS, 2 * ETH_ALEN),
+        BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, ETH_P_802_3, 0, 1),
+
+        BPF_STMT(BPF_RET|BPF_K, (u_int)-1),	/* accept */
+        BPF_STMT(BPF_RET|BPF_K, 0),		/* ignore */
+  };
+
+
+
+Tagged IP session 0 VLAN
+------------------------
+As described above, MBIM IP session 0 is treated as special by the
+driver.  It is initially mapped to untagged frames on the wwanY
+network device.
+
+This mapping implies a few restrictions on multiplexed IPS and DSS
+sessions, which may not always be practical:
+ - no IPS or DSS session can use a frame size greater than the MTU on
+   IP session 0
+ - no IPS or DSS session can be in the up state unless the network
+   device representing IP session 0 also is up
+
+These problems can be avoided by optionally making the driver map IP
+session 0 to a VLAN subdevice, similar to all other IP sessions.  This
+behaviour is triggered by adding a VLAN link for the magic VLAN ID
+4094.  The driver will then immediately start mapping MBIM IP session
+0 to this VLAN, and will drop untagged frames on the master wwanY
+device.
+
+Tip: It might be less confusing to the end user to name this VLAN
+subdevice after the MBIM SessionID instead of the VLAN ID.  For
+example:
+
+  ip link add link wwan0 name wwan0.0 type vlan id 4094
+
+
+VLAN mapping
+------------
+
+Summarizing the cdc_mbim driver mapping described above, we have this
+relationship between VLAN tags on the wwanY network device and MBIM
+sessions on the shared USB data channel:
+
+  VLAN ID       MBIM type   MBIM SessionID           Notes
+  ---------------------------------------------------------
+  untagged      IPS         0                        a)
+  1 - 255       IPS         1 - 255 <VLANID>
+  256 - 511     DSS         0 - 255 <VLANID - 256>
+  512 - 4093                                         b)
+  4094          IPS         0                        c)
+
+    a) if no VLAN ID 4094 link exists, else dropped
+    b) unsupported VLAN range, unconditionally dropped
+    c) if a VLAN ID 4094 link exists, else dropped
+
+
+
+
+References
+==========
+
+[1] USB Implementers Forum, Inc. - "Universal Serial Bus
+      Communications Class Subclass Specification for Mobile Broadband
+      Interface Model", Revision 1.0 (Errata 1), May 1, 2013
+      - http://www.usb.org/developers/docs/devclass_docs/
+
+[2] USB Implementers Forum, Inc. - "Universal Serial Bus
+      Communications Class Subclass Specifications for Network Control
+      Model Devices", Revision 1.0 (Errata 1), November 24, 2010
+      - http://www.usb.org/developers/docs/devclass_docs/
+
+[3] libmbim - "a glib-based library for talking to WWAN modems and
+      devices which speak the Mobile Interface Broadband Model (MBIM)
+      protocol"
+      - http://www.freedesktop.org/wiki/Software/libmbim/
+
+[4] ModemManager - "a DBus-activated daemon which controls mobile
+      broadband (2G/3G/4G) devices and connections"
+      - http://www.freedesktop.org/wiki/Software/ModemManager/
+
+[5] "MBIM (Mobile Broadband Interface Model) Registry"
+       - http://compliance.usb.org/mbim/
+
+[6] "/proc/bus/usb filesystem output"
+       - Documentation/usb/proc_usb_info.txt
+
+[7] "/sys/bus/usb/devices/.../descriptors"
+       - Documentation/ABI/stable/sysfs-bus-usb
diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt
index e3ba753cb714..ee78eba78a9d 100644
--- a/Documentation/networking/filter.txt
+++ b/Documentation/networking/filter.txt
@@ -281,6 +281,7 @@ Possible BPF extensions are shown in the following table:
   cpu                                   raw_smp_processor_id()
   vlan_tci                              vlan_tx_tag_get(skb)
   vlan_pr                               vlan_tx_tag_present(skb)
+  rand                                  prandom_u32()
 
 These extensions can also be prefixed with '#'.
 Examples for low-level BPF:
@@ -308,6 +309,18 @@ Examples for low-level BPF:
   ret #-1
   drop: ret #0
 
+** icmp random packet sampling, 1 in 4
+  ldh [12]
+  jne #0x800, drop
+  ldb [23]
+  jneq #1, drop
+  # get a random uint32 number
+  ld rand
+  mod #4
+  jneq #1, drop
+  ret #-1
+  drop: ret #0
+
 ** SECCOMP filter example:
 
   ld [4]                  /* offsetof(struct seccomp_data, arch) */
@@ -548,42 +561,43 @@ toolchain for developing and testing the kernel's JIT compiler.
 
 BPF kernel internals
 --------------------
-Internally, for the kernel interpreter, a different BPF instruction set
+Internally, for the kernel interpreter, a different instruction set
 format with similar underlying principles from BPF described in previous
 paragraphs is being used. However, the instruction set format is modelled
 closer to the underlying architecture to mimic native instruction sets, so
-that a better performance can be achieved (more details later).
+that a better performance can be achieved (more details later). This new
+ISA is called 'eBPF' or 'internal BPF' interchangeably. (Note: eBPF which
+originates from [e]xtended BPF is not the same as BPF extensions! While
+eBPF is an ISA, BPF extensions date back to classic BPF's 'overloading'
+of BPF_LD | BPF_{B,H,W} | BPF_ABS instruction.)
 
 It is designed to be JITed with one to one mapping, which can also open up
-the possibility for GCC/LLVM compilers to generate optimized BPF code through
-a BPF backend that performs almost as fast as natively compiled code.
+the possibility for GCC/LLVM compilers to generate optimized eBPF code through
+an eBPF backend that performs almost as fast as natively compiled code.
 
 The new instruction set was originally designed with the possible goal in
-mind to write programs in "restricted C" and compile into BPF with a optional
+mind to write programs in "restricted C" and compile into eBPF with a optional
 GCC/LLVM backend, so that it can just-in-time map to modern 64-bit CPUs with
-minimal performance overhead over two steps, that is, C -> BPF -> native code.
+minimal performance overhead over two steps, that is, C -> eBPF -> native code.
 
 Currently, the new format is being used for running user BPF programs, which
 includes seccomp BPF, classic socket filters, cls_bpf traffic classifier,
 team driver's classifier for its load-balancing mode, netfilter's xt_bpf
 extension, PTP dissector/classifier, and much more. They are all internally
 converted by the kernel into the new instruction set representation and run
-in the extended interpreter. For in-kernel handlers, this all works
-transparently by using sk_unattached_filter_create() for setting up the
-filter, resp. sk_unattached_filter_destroy() for destroying it. The macro
-SK_RUN_FILTER(filter, ctx) transparently invokes the right BPF function to
-run the filter. 'filter' is a pointer to struct sk_filter that we got from
-sk_unattached_filter_create(), and 'ctx' the given context (e.g. skb pointer).
-All constraints and restrictions from sk_chk_filter() apply before a
-conversion to the new layout is being done behind the scenes!
-
-Currently, for JITing, the user BPF format is being used and current BPF JIT
-compilers reused whenever possible. In other words, we do not (yet!) perform
-a JIT compilation in the new layout, however, future work will successively
-migrate traditional JIT compilers into the new instruction format as well, so
-that they will profit from the very same benefits. Thus, when speaking about
-JIT in the following, a JIT compiler (TBD) for the new instruction format is
-meant in this context.
+in the eBPF interpreter. For in-kernel handlers, this all works transparently
+by using sk_unattached_filter_create() for setting up the filter, resp.
+sk_unattached_filter_destroy() for destroying it. The macro
+SK_RUN_FILTER(filter, ctx) transparently invokes eBPF interpreter or JITed
+code to run the filter. 'filter' is a pointer to struct sk_filter that we
+got from sk_unattached_filter_create(), and 'ctx' the given context (e.g.
+skb pointer). All constraints and restrictions from sk_chk_filter() apply
+before a conversion to the new layout is being done behind the scenes!
+
+Currently, the classic BPF format is being used for JITing on most of the
+architectures. Only x86-64 performs JIT compilation from eBPF instruction set,
+however, future work will migrate other JIT compilers as well, so that they
+will profit from the very same benefits.
 
 Some core changes of the new internal format:
 
@@ -592,35 +606,35 @@ Some core changes of the new internal format:
   The old format had two registers A and X, and a hidden frame pointer. The
   new layout extends this to be 10 internal registers and a read-only frame
   pointer. Since 64-bit CPUs are passing arguments to functions via registers
-  the number of args from BPF program to in-kernel function is restricted
+  the number of args from eBPF program to in-kernel function is restricted
   to 5 and one register is used to accept return value from an in-kernel
   function. Natively, x86_64 passes first 6 arguments in registers, aarch64/
   sparcv9/mips64 have 7 - 8 registers for arguments; x86_64 has 6 callee saved
   registers, and aarch64/sparcv9/mips64 have 11 or more callee saved registers.
 
-  Therefore, BPF calling convention is defined as:
+  Therefore, eBPF calling convention is defined as:
 
-    * R0	- return value from in-kernel function
-    * R1 - R5	- arguments from BPF program to in-kernel function
+    * R0	- return value from in-kernel function, and exit value for eBPF program
+    * R1 - R5	- arguments from eBPF program to in-kernel function
     * R6 - R9	- callee saved registers that in-kernel function will preserve
     * R10	- read-only frame pointer to access stack
 
-  Thus, all BPF registers map one to one to HW registers on x86_64, aarch64,
-  etc, and BPF calling convention maps directly to ABIs used by the kernel on
+  Thus, all eBPF registers map one to one to HW registers on x86_64, aarch64,
+  etc, and eBPF calling convention maps directly to ABIs used by the kernel on
   64-bit architectures.
 
   On 32-bit architectures JIT may map programs that use only 32-bit arithmetic
   and may let more complex programs to be interpreted.
 
-  R0 - R5 are scratch registers and BPF program needs spill/fill them if
-  necessary across calls. Note that there is only one BPF program (== one BPF
-  main routine) and it cannot call other BPF functions, it can only call
-  predefined in-kernel functions, though.
+  R0 - R5 are scratch registers and eBPF program needs spill/fill them if
+  necessary across calls. Note that there is only one eBPF program (== one
+  eBPF main routine) and it cannot call other eBPF functions, it can only
+  call predefined in-kernel functions, though.
 
 - Register width increases from 32-bit to 64-bit:
 
   Still, the semantics of the original 32-bit ALU operations are preserved
-  via 32-bit subregisters. All BPF registers are 64-bit with 32-bit lower
+  via 32-bit subregisters. All eBPF registers are 64-bit with 32-bit lower
   subregisters that zero-extend into 64-bit if they are being written to.
   That behavior maps directly to x86_64 and arm64 subregister definition, but
   makes other JITs more difficult.
@@ -631,8 +645,8 @@ Some core changes of the new internal format:
 
   Operation is 64-bit, because on 64-bit architectures, pointers are also
   64-bit wide, and we want to pass 64-bit values in/out of kernel functions,
-  so 32-bit BPF registers would otherwise require to define register-pair
-  ABI, thus, there won't be able to use a direct BPF register to HW register
+  so 32-bit eBPF registers would otherwise require to define register-pair
+  ABI, thus, there won't be able to use a direct eBPF register to HW register
   mapping and JIT would need to do combine/split/move operations for every
   register in and out of the function, which is complex, bug prone and slow.
   Another reason is the use of atomic 64-bit counters.
@@ -646,14 +660,145 @@ Some core changes of the new internal format:
 - Introduces bpf_call insn and register passing convention for zero overhead
   calls from/to other kernel functions:
 
-  After a kernel function call, R1 - R5 are reset to unreadable and R0 has a
-  return type of the function. Since R6 - R9 are callee saved, their state is
-  preserved across the call.
-
-Also in the new design, BPF is limited to 4096 insns, which means that any
+  Before an in-kernel function call, the internal BPF program needs to
+  place function arguments into R1 to R5 registers to satisfy calling
+  convention, then the interpreter will take them from registers and pass
+  to in-kernel function. If R1 - R5 registers are mapped to CPU registers
+  that are used for argument passing on given architecture, the JIT compiler
+  doesn't need to emit extra moves. Function arguments will be in the correct
+  registers and BPF_CALL instruction will be JITed as single 'call' HW
+  instruction. This calling convention was picked to cover common call
+  situations without performance penalty.
+
+  After an in-kernel function call, R1 - R5 are reset to unreadable and R0 has
+  a return value of the function. Since R6 - R9 are callee saved, their state
+  is preserved across the call.
+
+  For example, consider three C functions:
+
+  u64 f1() { return (*_f2)(1); }
+  u64 f2(u64 a) { return f3(a + 1, a); }
+  u64 f3(u64 a, u64 b) { return a - b; }
+
+  GCC can compile f1, f3 into x86_64:
+
+  f1:
+    movl $1, %edi
+    movq _f2(%rip), %rax
+    jmp  *%rax
+  f3:
+    movq %rdi, %rax
+    subq %rsi, %rax
+    ret
+
+  Function f2 in eBPF may look like:
+
+  f2:
+    bpf_mov R2, R1
+    bpf_add R1, 1
+    bpf_call f3
+    bpf_exit
+
+  If f2 is JITed and the pointer stored to '_f2'. The calls f1 -> f2 -> f3 and
+  returns will be seamless. Without JIT, __sk_run_filter() interpreter needs to
+  be used to call into f2.
+
+  For practical reasons all eBPF programs have only one argument 'ctx' which is
+  already placed into R1 (e.g. on __sk_run_filter() startup) and the programs
+  can call kernel functions with up to 5 arguments. Calls with 6 or more arguments
+  are currently not supported, but these restrictions can be lifted if necessary
+  in the future.
+
+  On 64-bit architectures all register map to HW registers one to one. For
+  example, x86_64 JIT compiler can map them as ...
+
+    R0 - rax
+    R1 - rdi
+    R2 - rsi
+    R3 - rdx
+    R4 - rcx
+    R5 - r8
+    R6 - rbx
+    R7 - r13
+    R8 - r14
+    R9 - r15
+    R10 - rbp
+
+  ... since x86_64 ABI mandates rdi, rsi, rdx, rcx, r8, r9 for argument passing
+  and rbx, r12 - r15 are callee saved.
+
+  Then the following internal BPF pseudo-program:
+
+    bpf_mov R6, R1 /* save ctx */
+    bpf_mov R2, 2
+    bpf_mov R3, 3
+    bpf_mov R4, 4
+    bpf_mov R5, 5
+    bpf_call foo
+    bpf_mov R7, R0 /* save foo() return value */
+    bpf_mov R1, R6 /* restore ctx for next call */
+    bpf_mov R2, 6
+    bpf_mov R3, 7
+    bpf_mov R4, 8
+    bpf_mov R5, 9
+    bpf_call bar
+    bpf_add R0, R7
+    bpf_exit
+
+  After JIT to x86_64 may look like:
+
+    push %rbp
+    mov %rsp,%rbp
+    sub $0x228,%rsp
+    mov %rbx,-0x228(%rbp)
+    mov %r13,-0x220(%rbp)
+    mov %rdi,%rbx
+    mov $0x2,%esi
+    mov $0x3,%edx
+    mov $0x4,%ecx
+    mov $0x5,%r8d
+    callq foo
+    mov %rax,%r13
+    mov %rbx,%rdi
+    mov $0x2,%esi
+    mov $0x3,%edx
+    mov $0x4,%ecx
+    mov $0x5,%r8d
+    callq bar
+    add %r13,%rax
+    mov -0x228(%rbp),%rbx
+    mov -0x220(%rbp),%r13
+    leaveq
+    retq
+
+  Which is in this example equivalent in C to:
+
+    u64 bpf_filter(u64 ctx)
+    {
+        return foo(ctx, 2, 3, 4, 5) + bar(ctx, 6, 7, 8, 9);
+    }
+
+  In-kernel functions foo() and bar() with prototype: u64 (*)(u64 arg1, u64
+  arg2, u64 arg3, u64 arg4, u64 arg5); will receive arguments in proper
+  registers and place their return value into '%rax' which is R0 in eBPF.
+  Prologue and epilogue are emitted by JIT and are implicit in the
+  interpreter. R0-R5 are scratch registers, so eBPF program needs to preserve
+  them across the calls as defined by calling convention.
+
+  For example the following program is invalid:
+
+    bpf_mov R1, 1
+    bpf_call foo
+    bpf_mov R0, R1
+    bpf_exit
+
+  After the call the registers R1-R5 contain junk values and cannot be read.
+  In the future an eBPF verifier can be used to validate internal BPF programs.
+
+Also in the new design, eBPF is limited to 4096 insns, which means that any
 program will terminate quickly and will only call a fixed number of kernel
 functions. Original BPF and the new format are two operand instructions,
-which helps to do one-to-one mapping between BPF insn and x86 insn during JIT.
+which helps to do one-to-one mapping between eBPF insn and x86 insn during JIT.
 
 The input context pointer for invoking the interpreter function is generic,
 its content is defined by a specific use case. For seccomp register R1 points
@@ -661,7 +806,26 @@ to seccomp_data, for converted BPF filters R1 points to a skb.
 
 A program, that is translated internally consists of the following elements:
 
-  op:16, jt:8, jf:8, k:32    ==>    op:8, a_reg:4, x_reg:4, off:16, imm:32
+  op:16, jt:8, jf:8, k:32    ==>    op:8, dst_reg:4, src_reg:4, off:16, imm:32
+
+So far 87 internal BPF instructions were implemented. 8-bit 'op' opcode field
+has room for new instructions. Some of them may use 16/24/32 byte encoding. New
+instructions must be multiple of 8 bytes to preserve backward compatibility.
+
+Internal BPF is a general purpose RISC instruction set. Not every register and
+every instruction are used during translation from original BPF to new format.
+For example, socket filters are not using 'exclusive add' instruction, but
+tracing filters may do to maintain counters of events, for example. Register R9
+is not used by socket filters either, but more complex filters may be running
+out of registers and would have to resort to spill/fill to stack.
+
+Internal BPF can used as generic assembler for last step performance
+optimizations, socket filters and seccomp are using it as assembler. Tracing
+filters may use it as assembler to generate code from kernel. In kernel usage
+may not be bounded by security considerations, since generated internal BPF code
+may be optimizing internal code path and not being exposed to the user space.
+Safety of internal BPF can come from a verifier (TBD). In such use cases as
+described, it may be used as safe instruction set.
 
 Just like the original BPF, the new format runs within a controlled environment,
 is deterministic and the kernel can easily prove that. The safety of the program
@@ -670,6 +834,181 @@ loops and other CFG validation; second step starts from the first insn and
 descends all possible paths. It simulates execution of every insn and observes
 the state change of registers and stack.
 
+eBPF opcode encoding
+--------------------
+
+eBPF is reusing most of the opcode encoding from classic to simplify conversion
+of classic BPF to eBPF. For arithmetic and jump instructions the 8-bit 'code'
+field is divided into three parts:
+
+  +----------------+--------+--------------------+
+  |   4 bits       |  1 bit |   3 bits           |
+  | operation code | source | instruction class  |
+  +----------------+--------+--------------------+
+  (MSB)                                      (LSB)
+
+Three LSB bits store instruction class which is one of:
+
+  Classic BPF classes:    eBPF classes:
+
+  BPF_LD    0x00          BPF_LD    0x00
+  BPF_LDX   0x01          BPF_LDX   0x01
+  BPF_ST    0x02          BPF_ST    0x02
+  BPF_STX   0x03          BPF_STX   0x03
+  BPF_ALU   0x04          BPF_ALU   0x04
+  BPF_JMP   0x05          BPF_JMP   0x05
+  BPF_RET   0x06          [ class 6 unused, for future if needed ]
+  BPF_MISC  0x07          BPF_ALU64 0x07
+
+When BPF_CLASS(code) == BPF_ALU or BPF_JMP, 4th bit encodes source operand ...
+
+  BPF_K     0x00
+  BPF_X     0x08
+
+ * in classic BPF, this means:
+
+  BPF_SRC(code) == BPF_X - use register X as source operand
+  BPF_SRC(code) == BPF_K - use 32-bit immediate as source operand
+
+ * in eBPF, this means:
+
+  BPF_SRC(code) == BPF_X - use 'src_reg' register as source operand
+  BPF_SRC(code) == BPF_K - use 32-bit immediate as source operand
+
+... and four MSB bits store operation code.
+
+If BPF_CLASS(code) == BPF_ALU or BPF_ALU64 [ in eBPF ], BPF_OP(code) is one of:
+
+  BPF_ADD   0x00
+  BPF_SUB   0x10
+  BPF_MUL   0x20
+  BPF_DIV   0x30
+  BPF_OR    0x40
+  BPF_AND   0x50
+  BPF_LSH   0x60
+  BPF_RSH   0x70
+  BPF_NEG   0x80
+  BPF_MOD   0x90
+  BPF_XOR   0xa0
+  BPF_MOV   0xb0  /* eBPF only: mov reg to reg */
+  BPF_ARSH  0xc0  /* eBPF only: sign extending shift right */
+  BPF_END   0xd0  /* eBPF only: endianness conversion */
+
+If BPF_CLASS(code) == BPF_JMP, BPF_OP(code) is one of:
+
+  BPF_JA    0x00
+  BPF_JEQ   0x10
+  BPF_JGT   0x20
+  BPF_JGE   0x30
+  BPF_JSET  0x40
+  BPF_JNE   0x50  /* eBPF only: jump != */
+  BPF_JSGT  0x60  /* eBPF only: signed '>' */
+  BPF_JSGE  0x70  /* eBPF only: signed '>=' */
+  BPF_CALL  0x80  /* eBPF only: function call */
+  BPF_EXIT  0x90  /* eBPF only: function return */
+
+So BPF_ADD | BPF_X | BPF_ALU means 32-bit addition in both classic BPF
+and eBPF. There are only two registers in classic BPF, so it means A += X.
+In eBPF it means dst_reg = (u32) dst_reg + (u32) src_reg; similarly,
+BPF_XOR | BPF_K | BPF_ALU means A ^= imm32 in classic BPF and analogous
+src_reg = (u32) src_reg ^ (u32) imm32 in eBPF.
+
+Classic BPF is using BPF_MISC class to represent A = X and X = A moves.
+eBPF is using BPF_MOV | BPF_X | BPF_ALU code instead. Since there are no
+BPF_MISC operations in eBPF, the class 7 is used as BPF_ALU64 to mean
+exactly the same operations as BPF_ALU, but with 64-bit wide operands
+instead. So BPF_ADD | BPF_X | BPF_ALU64 means 64-bit addition, i.e.:
+dst_reg = dst_reg + src_reg
+
+Classic BPF wastes the whole BPF_RET class to represent a single 'ret'
+operation. Classic BPF_RET | BPF_K means copy imm32 into return register
+and perform function exit. eBPF is modeled to match CPU, so BPF_JMP | BPF_EXIT
+in eBPF means function exit only. The eBPF program needs to store return
+value into register R0 before doing a BPF_EXIT. Class 6 in eBPF is currently
+unused and reserved for future use.
+
+For load and store instructions the 8-bit 'code' field is divided as:
+
+  +--------+--------+-------------------+
+  | 3 bits | 2 bits |   3 bits          |
+  |  mode  |  size  | instruction class |
+  +--------+--------+-------------------+
+  (MSB)                             (LSB)
+
+Size modifier is one of ...
+
+  BPF_W   0x00    /* word */
+  BPF_H   0x08    /* half word */
+  BPF_B   0x10    /* byte */
+  BPF_DW  0x18    /* eBPF only, double word */
+
+... which encodes size of load/store operation:
+
+ B  - 1 byte
+ H  - 2 byte
+ W  - 4 byte
+ DW - 8 byte (eBPF only)
+
+Mode modifier is one of:
+
+  BPF_IMM  0x00  /* classic BPF only, reserved in eBPF */
+  BPF_ABS  0x20
+  BPF_IND  0x40
+  BPF_MEM  0x60
+  BPF_LEN  0x80  /* classic BPF only, reserved in eBPF */
+  BPF_MSH  0xa0  /* classic BPF only, reserved in eBPF */
+  BPF_XADD 0xc0  /* eBPF only, exclusive add */
+
+eBPF has two non-generic instructions: (BPF_ABS | <size> | BPF_LD) and
+(BPF_IND | <size> | BPF_LD) which are used to access packet data.
+
+They had to be carried over from classic to have strong performance of
+socket filters running in eBPF interpreter. These instructions can only
+be used when interpreter context is a pointer to 'struct sk_buff' and
+have seven implicit operands. Register R6 is an implicit input that must
+contain pointer to sk_buff. Register R0 is an implicit output which contains
+the data fetched from the packet. Registers R1-R5 are scratch registers
+and must not be used to store the data across BPF_ABS | BPF_LD or
+BPF_IND | BPF_LD instructions.
+
+These instructions have implicit program exit condition as well. When
+eBPF program is trying to access the data beyond the packet boundary,
+the interpreter will abort the execution of the program. JIT compilers
+therefore must preserve this property. src_reg and imm32 fields are
+explicit inputs to these instructions.
+
+For example:
+
+  BPF_IND | BPF_W | BPF_LD means:
+
+    R0 = ntohl(*(u32 *) (((struct sk_buff *) R6)->data + src_reg + imm32))
+    and R1 - R5 were scratched.
+
+Unlike classic BPF instruction set, eBPF has generic load/store operations:
+
+BPF_MEM | <size> | BPF_STX:  *(size *) (dst_reg + off) = src_reg
+BPF_MEM | <size> | BPF_ST:   *(size *) (dst_reg + off) = imm32
+BPF_MEM | <size> | BPF_LDX:  dst_reg = *(size *) (src_reg + off)
+BPF_XADD | BPF_W  | BPF_STX: lock xadd *(u32 *)(dst_reg + off16) += src_reg
+BPF_XADD | BPF_DW | BPF_STX: lock xadd *(u64 *)(dst_reg + off16) += src_reg
+
+Where size is one of: BPF_B or BPF_H or BPF_W or BPF_DW. Note that 1 and
+2 byte atomic increments are not supported.
+
+Testing
+-------
+
+Next to the BPF toolchain, the kernel also ships a test module that contains
+various test cases for classic and internal BPF that can be executed against
+the BPF interpreter and JIT compiler. It can be found in lib/test_bpf.c and
+enabled via Kconfig:
+
+  CONFIG_TEST_BPF=m
+
+After the module has been built and installed, the test suite can be executed
+via insmod or modprobe against 'test_bpf' module. Results of the test cases
+including timings in nsec can be found in the kernel log (dmesg).
+
 Misc
 ----
 
diff --git a/Documentation/power/suspend-and-cpuhotplug.txt b/Documentation/power/suspend-and-cpuhotplug.txt
index e13dafc8e8f1..2850df3bf957 100644
--- a/Documentation/power/suspend-and-cpuhotplug.txt
+++ b/Documentation/power/suspend-and-cpuhotplug.txt
@@ -1,6 +1,6 @@
 Interaction of Suspend code (S3) with the CPU hotplug infrastructure
 
-     (C) 2011 Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
+     (C) 2011 - 2014 Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
 
 
 I. How does the regular CPU hotplug code differ from how the Suspend-to-RAM
diff --git a/Documentation/vDSO/parse_vdso.c b/Documentation/vDSO/parse_vdso.c
index 85870208edcf..1dbb4b87268f 100644
--- a/Documentation/vDSO/parse_vdso.c
+++ b/Documentation/vDSO/parse_vdso.c
@@ -1,6 +1,6 @@
 /*
  * parse_vdso.c: Linux reference vDSO parser
- * Written by Andrew Lutomirski, 2011.
+ * Written by Andrew Lutomirski, 2011-2014.
  *
  * This code is meant to be linked in to various programs that run on Linux.
  * As such, it is available with as few restrictions as possible.  This file
@@ -11,13 +11,14 @@
  * it starts a program.  It works equally well in statically and dynamically
  * linked binaries.
  *
- * This code is tested on x86_64.  In principle it should work on any 64-bit
+ * This code is tested on x86.  In principle it should work on any
  * architecture that has a vDSO.
  */
 
 #include <stdbool.h>
 #include <stdint.h>
 #include <string.h>
+#include <limits.h>
 #include <elf.h>
 
 /*
@@ -45,11 +46,18 @@ extern void *vdso_sym(const char *version, const char *name);
 
 
 /* And here's the code. */
-
-#ifndef __x86_64__
-# error Not yet ported to non-x86_64 architectures
+#ifndef ELF_BITS
+# if ULONG_MAX > 0xffffffffUL
+#  define ELF_BITS 64
+# else
+#  define ELF_BITS 32
+# endif
 #endif
 
+#define ELF_BITS_XFORM2(bits, x) Elf##bits##_##x
+#define ELF_BITS_XFORM(bits, x) ELF_BITS_XFORM2(bits, x)
+#define ELF(x) ELF_BITS_XFORM(ELF_BITS, x)
+
 static struct vdso_info
 {
 	bool valid;
@@ -59,14 +67,14 @@ static struct vdso_info
 	uintptr_t load_offset;  /* load_addr - recorded vaddr */
 
 	/* Symbol table */
-	Elf64_Sym *symtab;
+	ELF(Sym) *symtab;
 	const char *symstrings;
-	Elf64_Word *bucket, *chain;
-	Elf64_Word nbucket, nchain;
+	ELF(Word) *bucket, *chain;
+	ELF(Word) nbucket, nchain;
 
 	/* Version table */
-	Elf64_Versym *versym;
-	Elf64_Verdef *verdef;
+	ELF(Versym) *versym;
+	ELF(Verdef) *verdef;
 } vdso_info;
 
 /* Straight from the ELF specification. */
@@ -92,9 +100,14 @@ void vdso_init_from_sysinfo_ehdr(uintptr_t base)
 
 	vdso_info.load_addr = base;
 
-	Elf64_Ehdr *hdr = (Elf64_Ehdr*)base;
-	Elf64_Phdr *pt = (Elf64_Phdr*)(vdso_info.load_addr + hdr->e_phoff);
-	Elf64_Dyn *dyn = 0;
+	ELF(Ehdr) *hdr = (ELF(Ehdr)*)base;
+	if (hdr->e_ident[EI_CLASS] !=
+	    (ELF_BITS == 32 ? ELFCLASS32 : ELFCLASS64)) {
+		return;  /* Wrong ELF class -- check ELF_BITS */
+	}
+
+	ELF(Phdr) *pt = (ELF(Phdr)*)(vdso_info.load_addr + hdr->e_phoff);
+	ELF(Dyn) *dyn = 0;
 
 	/*
 	 * We need two things from the segment table: the load offset
@@ -108,7 +121,7 @@ void vdso_init_from_sysinfo_ehdr(uintptr_t base)
 				+ (uintptr_t)pt[i].p_offset
 				- (uintptr_t)pt[i].p_vaddr;
 		} else if (pt[i].p_type == PT_DYNAMIC) {
-			dyn = (Elf64_Dyn*)(base + pt[i].p_offset);
+			dyn = (ELF(Dyn)*)(base + pt[i].p_offset);
 		}
 	}
 
@@ -118,7 +131,7 @@ void vdso_init_from_sysinfo_ehdr(uintptr_t base)
 	/*
 	 * Fish out the useful bits of the dynamic table.
 	 */
-	Elf64_Word *hash = 0;
+	ELF(Word) *hash = 0;
 	vdso_info.symstrings = 0;
 	vdso_info.symtab = 0;
 	vdso_info.versym = 0;
@@ -131,22 +144,22 @@ void vdso_init_from_sysinfo_ehdr(uintptr_t base)
 				 + vdso_info.load_offset);
 			break;
 		case DT_SYMTAB:
-			vdso_info.symtab = (Elf64_Sym *)
+			vdso_info.symtab = (ELF(Sym) *)
 				((uintptr_t)dyn[i].d_un.d_ptr
 				 + vdso_info.load_offset);
 			break;
 		case DT_HASH:
-			hash = (Elf64_Word *)
+			hash = (ELF(Word) *)
 				((uintptr_t)dyn[i].d_un.d_ptr
 				 + vdso_info.load_offset);
 			break;
 		case DT_VERSYM:
-			vdso_info.versym = (Elf64_Versym *)
+			vdso_info.versym = (ELF(Versym) *)
 				((uintptr_t)dyn[i].d_un.d_ptr
 				 + vdso_info.load_offset);
 			break;
 		case DT_VERDEF:
-			vdso_info.verdef = (Elf64_Verdef *)
+			vdso_info.verdef = (ELF(Verdef) *)
 				((uintptr_t)dyn[i].d_un.d_ptr
 				 + vdso_info.load_offset);
 			break;
@@ -168,8 +181,8 @@ void vdso_init_from_sysinfo_ehdr(uintptr_t base)
 	vdso_info.valid = true;
 }
 
-static bool vdso_match_version(Elf64_Versym ver,
-			       const char *name, Elf64_Word hash)
+static bool vdso_match_version(ELF(Versym) ver,
+			       const char *name, ELF(Word) hash)
 {
 	/*
 	 * This is a helper function to check if the version indexed by
@@ -188,7 +201,7 @@ static bool vdso_match_version(Elf64_Versym ver,
 
 	/* First step: find the version definition */
 	ver &= 0x7fff;  /* Apparently bit 15 means "hidden" */
-	Elf64_Verdef *def = vdso_info.verdef;
+	ELF(Verdef) *def = vdso_info.verdef;
 	while(true) {
 		if ((def->vd_flags & VER_FLG_BASE) == 0
 		    && (def->vd_ndx & 0x7fff) == ver)
@@ -197,11 +210,11 @@ static bool vdso_match_version(Elf64_Versym ver,
 		if (def->vd_next == 0)
 			return false;  /* No definition. */
 
-		def = (Elf64_Verdef *)((char *)def + def->vd_next);
+		def = (ELF(Verdef) *)((char *)def + def->vd_next);
 	}
 
 	/* Now figure out whether it matches. */
-	Elf64_Verdaux *aux = (Elf64_Verdaux*)((char *)def + def->vd_aux);
+	ELF(Verdaux) *aux = (ELF(Verdaux)*)((char *)def + def->vd_aux);
 	return def->vd_hash == hash
 		&& !strcmp(name, vdso_info.symstrings + aux->vda_name);
 }
@@ -213,10 +226,10 @@ void *vdso_sym(const char *version, const char *name)
 		return 0;
 
 	ver_hash = elf_hash(version);
-	Elf64_Word chain = vdso_info.bucket[elf_hash(name) % vdso_info.nbucket];
+	ELF(Word) chain = vdso_info.bucket[elf_hash(name) % vdso_info.nbucket];
 
 	for (; chain != STN_UNDEF; chain = vdso_info.chain[chain]) {
-		Elf64_Sym *sym = &vdso_info.symtab[chain];
+		ELF(Sym) *sym = &vdso_info.symtab[chain];
 
 		/* Check for a defined global or weak function w/ right name. */
 		if (ELF64_ST_TYPE(sym->st_info) != STT_FUNC)
@@ -243,7 +256,7 @@ void *vdso_sym(const char *version, const char *name)
 
 void vdso_init_from_auxv(void *auxv)
 {
-	Elf64_auxv_t *elf_auxv = auxv;
+	ELF(auxv_t) *elf_auxv = auxv;
 	for (int i = 0; elf_auxv[i].a_type != AT_NULL; i++)
 	{
 		if (elf_auxv[i].a_type == AT_SYSINFO_EHDR) {
diff --git a/Documentation/vDSO/vdso_standalone_test_x86.c b/Documentation/vDSO/vdso_standalone_test_x86.c
new file mode 100644
index 000000000000..d46240265c50
--- /dev/null
+++ b/Documentation/vDSO/vdso_standalone_test_x86.c
@@ -0,0 +1,128 @@
+/*
+ * vdso_test.c: Sample code to test parse_vdso.c on x86
+ * Copyright (c) 2011-2014 Andy Lutomirski
+ * Subject to the GNU General Public License, version 2
+ *
+ * You can amuse yourself by compiling with:
+ * gcc -std=gnu99 -nostdlib
+ *     -Os -fno-asynchronous-unwind-tables -flto -lgcc_s
+ *      vdso_standalone_test_x86.c parse_vdso.c
+ * to generate a small binary.  On x86_64, you can omit -lgcc_s
+ * if you want the binary to be completely standalone.
+ */
+
+#include <sys/syscall.h>
+#include <sys/time.h>
+#include <unistd.h>
+#include <stdint.h>
+
+extern void *vdso_sym(const char *version, const char *name);
+extern void vdso_init_from_sysinfo_ehdr(uintptr_t base);
+extern void vdso_init_from_auxv(void *auxv);
+
+/* We need a libc functions... */
+int strcmp(const char *a, const char *b)
+{
+	/* This implementation is buggy: it never returns -1. */
+	while (*a || *b) {
+		if (*a != *b)
+			return 1;
+		if (*a == 0 || *b == 0)
+			return 1;
+		a++;
+		b++;
+	}
+
+	return 0;
+}
+
+/* ...and two syscalls.  This is x86-specific. */
+static inline long x86_syscall3(long nr, long a0, long a1, long a2)
+{
+	long ret;
+#ifdef __x86_64__
+	asm volatile ("syscall" : "=a" (ret) : "a" (nr),
+		      "D" (a0), "S" (a1), "d" (a2) :
+		      "cc", "memory", "rcx",
+		      "r8", "r9", "r10", "r11" );
+#else
+	asm volatile ("int $0x80" : "=a" (ret) : "a" (nr),
+		      "b" (a0), "c" (a1), "d" (a2) :
+		      "cc", "memory" );
+#endif
+	return ret;
+}
+
+static inline long linux_write(int fd, const void *data, size_t len)
+{
+	return x86_syscall3(__NR_write, fd, (long)data, (long)len);
+}
+
+static inline void linux_exit(int code)
+{
+	x86_syscall3(__NR_exit, code, 0, 0);
+}
+
+void to_base10(char *lastdig, uint64_t n)
+{
+	while (n) {
+		*lastdig = (n % 10) + '0';
+		n /= 10;
+		lastdig--;
+	}
+}
+
+__attribute__((externally_visible)) void c_main(void **stack)
+{
+	/* Parse the stack */
+	long argc = (long)*stack;
+	stack += argc + 2;
+
+	/* Now we're pointing at the environment.  Skip it. */
+	while(*stack)
+		stack++;
+	stack++;
+
+	/* Now we're pointing at auxv.  Initialize the vDSO parser. */
+	vdso_init_from_auxv((void *)stack);
+
+	/* Find gettimeofday. */
+	typedef long (*gtod_t)(struct timeval *tv, struct timezone *tz);
+	gtod_t gtod = (gtod_t)vdso_sym("LINUX_2.6", "__vdso_gettimeofday");
+
+	if (!gtod)
+		linux_exit(1);
+
+	struct timeval tv;
+	long ret = gtod(&tv, 0);
+
+	if (ret == 0) {
+		char buf[] = "The time is                     .000000\n";
+		to_base10(buf + 31, tv.tv_sec);
+		to_base10(buf + 38, tv.tv_usec);
+		linux_write(1, buf, sizeof(buf) - 1);
+	} else {
+		linux_exit(ret);
+	}
+
+	linux_exit(0);
+}
+
+/*
+ * This is the real entry point.  It passes the initial stack into
+ * the C entry point.
+ */
+asm (
+	".text\n"
+	".global _start\n"
+	".type _start,@function\n"
+	"_start:\n\t"
+#ifdef __x86_64__
+	"mov %rsp,%rdi\n\t"
+	"jmp c_main"
+#else
+	"push %esp\n\t"
+	"call c_main\n\t"
+	"int $3"
+#endif
+	);
diff --git a/Documentation/vDSO/vdso_test.c b/Documentation/vDSO/vdso_test.c
index fff633432dff..8daeb7d7032c 100644
--- a/Documentation/vDSO/vdso_test.c
+++ b/Documentation/vDSO/vdso_test.c
@@ -1,111 +1,52 @@
 /*
- * vdso_test.c: Sample code to test parse_vdso.c on x86_64
- * Copyright (c) 2011 Andy Lutomirski
+ * vdso_test.c: Sample code to test parse_vdso.c
+ * Copyright (c) 2014 Andy Lutomirski
  * Subject to the GNU General Public License, version 2
  *
- * You can amuse yourself by compiling with:
- * gcc -std=gnu99 -nostdlib
- *     -Os -fno-asynchronous-unwind-tables -flto
- *      vdso_test.c parse_vdso.c -o vdso_test
- * to generate a small binary with no dependencies at all.
+ * Compile with:
+ * gcc -std=gnu99 vdso_test.c parse_vdso.c
+ *
+ * Tested on x86, 32-bit and 64-bit.  It may work on other architectures, too.
  */
 
-#include <sys/syscall.h>
-#include <sys/time.h>
-#include <unistd.h>
 #include <stdint.h>
+#include <elf.h>
+#include <stdio.h>
+#include <sys/auxv.h>
+#include <sys/time.h>
 
 extern void *vdso_sym(const char *version, const char *name);
 extern void vdso_init_from_sysinfo_ehdr(uintptr_t base);
 extern void vdso_init_from_auxv(void *auxv);
 
-/* We need a libc functions... */
-int strcmp(const char *a, const char *b)
+int main(int argc, char **argv)
 {
-	/* This implementation is buggy: it never returns -1. */
-	while (*a || *b) {
-		if (*a != *b)
-			return 1;
-		if (*a == 0 || *b == 0)
-			return 1;
-		a++;
-		b++;
+	unsigned long sysinfo_ehdr = getauxval(AT_SYSINFO_EHDR);
+	if (!sysinfo_ehdr) {
+		printf("AT_SYSINFO_EHDR is not present!\n");
+		return 0;
 	}
 
-	return 0;
-}
-
-/* ...and two syscalls.  This is x86_64-specific. */
-static inline long linux_write(int fd, const void *data, size_t len)
-{
-
-	long ret;
-	asm volatile ("syscall" : "=a" (ret) : "a" (__NR_write),
-		      "D" (fd), "S" (data), "d" (len) :
-		      "cc", "memory", "rcx",
-		      "r8", "r9", "r10", "r11" );
-	return ret;
-}
-
-static inline void linux_exit(int code)
-{
-	asm volatile ("syscall" : : "a" (__NR_exit), "D" (code));
-}
-
-void to_base10(char *lastdig, uint64_t n)
-{
-	while (n) {
-		*lastdig = (n % 10) + '0';
-		n /= 10;
-		lastdig--;
-	}
-}
-
-__attribute__((externally_visible)) void c_main(void **stack)
-{
-	/* Parse the stack */
-	long argc = (long)*stack;
-	stack += argc + 2;
-
-	/* Now we're pointing at the environment.  Skip it. */
-	while(*stack)
-		stack++;
-	stack++;
-
-	/* Now we're pointing at auxv.  Initialize the vDSO parser. */
-	vdso_init_from_auxv((void *)stack);
+	vdso_init_from_sysinfo_ehdr(getauxval(AT_SYSINFO_EHDR));
 
 	/* Find gettimeofday. */
 	typedef long (*gtod_t)(struct timeval *tv, struct timezone *tz);
 	gtod_t gtod = (gtod_t)vdso_sym("LINUX_2.6", "__vdso_gettimeofday");
 
-	if (!gtod)
-		linux_exit(1);
+	if (!gtod) {
+		printf("Could not find __vdso_gettimeofday\n");
+		return 1;
+	}
 
 	struct timeval tv;
 	long ret = gtod(&tv, 0);
 
 	if (ret == 0) {
-		char buf[] = "The time is                     .000000\n";
-		to_base10(buf + 31, tv.tv_sec);
-		to_base10(buf + 38, tv.tv_usec);
-		linux_write(1, buf, sizeof(buf) - 1);
+		printf("The time is %lld.%06lld\n",
+		       (long long)tv.tv_sec, (long long)tv.tv_usec);
 	} else {
-		linux_exit(ret);
+		printf("__vdso_gettimeofday failed\n");
 	}
 
-	linux_exit(0);
+	return 0;
 }
-
-/*
- * This is the real entry point.  It passes the initial stack into
- * the C entry point.
- */
-asm (
-	".text\n"
-	".global _start\n"
-        ".type _start,@function\n"
-        "_start:\n\t"
-        "mov %rsp,%rdi\n\t"
-        "jmp c_main"
-	);
author	Wolfram Sang <wsa@the-dreams.de>	2014-06-17 14:36:41 +0200
committer	Wolfram Sang <wsa@the-dreams.de>	2014-06-17 14:37:31 +0200
commit	f0b1f6442b5090fed3529cb39f3acf8c91693d3d (patch)
tree	bc5f62b017a82161c9a7f892f464813f6efd5bf3 /Documentation
parent	4632a93f015caf6d7db4352f37aab74a39e60d7a (diff)
parent	7171511eaec5bf23fb06078f59784a3a0626b38f (diff)