summaryrefslogtreecommitdiff
path: root/arch/alpha/kernel/pci_impl.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/alpha/kernel/pci_impl.h
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'arch/alpha/kernel/pci_impl.h')
-rw-r--r--arch/alpha/kernel/pci_impl.h209
1 files changed, 209 insertions, 0 deletions
diff --git a/arch/alpha/kernel/pci_impl.h b/arch/alpha/kernel/pci_impl.h
new file mode 100644
index 000000000000..f8b74995a002
--- /dev/null
+++ b/arch/alpha/kernel/pci_impl.h
@@ -0,0 +1,209 @@
+/*
+ * linux/arch/alpha/kernel/pci_impl.h
+ *
+ * This file contains declarations and inline functions for interfacing
+ * with the PCI initialization routines.
+ */
+
+struct pci_dev;
+struct pci_controller;
+struct pci_iommu_arena;
+
+/*
+ * We can't just blindly use 64K for machines with EISA busses; they
+ * may also have PCI-PCI bridges present, and then we'd configure the
+ * bridge incorrectly.
+ *
+ * Also, we start at 0x8000 or 0x9000, in hopes to get all devices'
+ * IO space areas allocated *before* 0xC000; this is because certain
+ * BIOSes (Millennium for one) use PCI Config space "mechanism #2"
+ * accesses to probe the bus. If a device's registers appear at 0xC000,
+ * it may see an INx/OUTx at that address during BIOS emulation of the
+ * VGA BIOS, and some cards, notably Adaptec 2940UW, take mortal offense.
+ */
+
+#define EISA_DEFAULT_IO_BASE 0x9000 /* start above 8th slot */
+#define DEFAULT_IO_BASE 0x8000 /* start at 8th slot */
+
+/*
+ * We try to make the DEFAULT_MEM_BASE addresses *always* have more than
+ * a single bit set. This is so that devices like the broken Myrinet card
+ * will always have a PCI memory address that will never match a IDSEL
+ * address in PCI Config space, which can cause problems with early rev cards.
+ */
+
+/*
+ * An XL is AVANTI (APECS) family, *but* it has only 27 bits of ISA address
+ * that get passed through the PCI<->ISA bridge chip. Although this causes
+ * us to set the PCI->Mem window bases lower than normal, we still allocate
+ * PCI bus devices' memory addresses *below* the low DMA mapping window,
+ * and hope they fit below 64Mb (to avoid conflicts), and so that they can
+ * be accessed via SPARSE space.
+ *
+ * We accept the risk that a broken Myrinet card will be put into a true XL
+ * and thus can more easily run into the problem described below.
+ */
+#define XL_DEFAULT_MEM_BASE ((16+2)*1024*1024) /* 16M to 64M-1 is avail */
+
+/*
+ * APECS and LCA have only 34 bits for physical addresses, thus limiting PCI
+ * bus memory addresses for SPARSE access to be less than 128Mb.
+ */
+#define APECS_AND_LCA_DEFAULT_MEM_BASE ((16+2)*1024*1024)
+
+/*
+ * Because MCPCIA and T2 core logic support more bits for
+ * physical addresses, they should allow an expanded range of SPARSE
+ * memory addresses. However, we do not use them all, in order to
+ * avoid the HAE manipulation that would be needed.
+ */
+#define MCPCIA_DEFAULT_MEM_BASE ((32+2)*1024*1024)
+#define T2_DEFAULT_MEM_BASE ((16+1)*1024*1024)
+
+/*
+ * Because CIA and PYXIS have more bits for physical addresses,
+ * they support an expanded range of SPARSE memory addresses.
+ */
+#define DEFAULT_MEM_BASE ((128+16)*1024*1024)
+
+/* ??? Experimenting with no HAE for CIA. */
+#define CIA_DEFAULT_MEM_BASE ((32+2)*1024*1024)
+
+#define IRONGATE_DEFAULT_MEM_BASE ((256*8-16)*1024*1024)
+
+#define DEFAULT_AGP_APER_SIZE (64*1024*1024)
+
+/*
+ * A small note about bridges and interrupts. The DECchip 21050 (and
+ * later) adheres to the PCI-PCI bridge specification. This says that
+ * the interrupts on the other side of a bridge are swizzled in the
+ * following manner:
+ *
+ * Dev Interrupt Interrupt
+ * Pin on Pin on
+ * Device Connector
+ *
+ * 4 A A
+ * B B
+ * C C
+ * D D
+ *
+ * 5 A B
+ * B C
+ * C D
+ * D A
+ *
+ * 6 A C
+ * B D
+ * C A
+ * D B
+ *
+ * 7 A D
+ * B A
+ * C B
+ * D C
+ *
+ * Where A = pin 1, B = pin 2 and so on and pin=0 = default = A.
+ * Thus, each swizzle is ((pin-1) + (device#-4)) % 4
+ *
+ * The following code swizzles for exactly one bridge. The routine
+ * common_swizzle below handles multiple bridges. But there are a
+ * couple boards that do strange things, so we define this here.
+ */
+
+static inline u8 bridge_swizzle(u8 pin, u8 slot)
+{
+ return (((pin-1) + slot) % 4) + 1;
+}
+
+
+/* The following macro is used to implement the table-based irq mapping
+ function for all single-bus Alphas. */
+
+#define COMMON_TABLE_LOOKUP \
+({ long _ctl_ = -1; \
+ if (slot >= min_idsel && slot <= max_idsel && pin < irqs_per_slot) \
+ _ctl_ = irq_tab[slot - min_idsel][pin]; \
+ _ctl_; })
+
+
+/* A PCI IOMMU allocation arena. There are typically two of these
+ regions per bus. */
+/* ??? The 8400 has a 32-byte pte entry, and the entire table apparently
+ lives directly on the host bridge (no tlb?). We don't support this
+ machine, but if we ever did, we'd need to parameterize all this quite
+ a bit further. Probably with per-bus operation tables. */
+
+struct pci_iommu_arena
+{
+ spinlock_t lock;
+ struct pci_controller *hose;
+#define IOMMU_INVALID_PTE 0x2 /* 32:63 bits MBZ */
+#define IOMMU_RESERVED_PTE 0xface
+ unsigned long *ptes;
+ dma_addr_t dma_base;
+ unsigned int size;
+ unsigned int next_entry;
+ unsigned int align_entry;
+};
+
+#if defined(CONFIG_ALPHA_SRM) && \
+ (defined(CONFIG_ALPHA_CIA) || defined(CONFIG_ALPHA_LCA))
+# define NEED_SRM_SAVE_RESTORE
+#else
+# undef NEED_SRM_SAVE_RESTORE
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(NEED_SRM_SAVE_RESTORE)
+# define ALPHA_RESTORE_SRM_SETUP
+#else
+# undef ALPHA_RESTORE_SRM_SETUP
+#endif
+
+#ifdef ALPHA_RESTORE_SRM_SETUP
+/* Store PCI device configuration left by SRM here. */
+struct pdev_srm_saved_conf
+{
+ struct pdev_srm_saved_conf *next;
+ struct pci_dev *dev;
+};
+
+extern void pci_restore_srm_config(void);
+#else
+#define pdev_save_srm_config(dev) do {} while (0)
+#define pci_restore_srm_config() do {} while (0)
+#endif
+
+/* The hose list. */
+extern struct pci_controller *hose_head, **hose_tail;
+extern struct pci_controller *pci_isa_hose;
+
+/* Indicate that we trust the console to configure things properly. */
+extern int pci_probe_only;
+
+extern unsigned long alpha_agpgart_size;
+
+extern void common_init_pci(void);
+extern u8 common_swizzle(struct pci_dev *, u8 *);
+extern struct pci_controller *alloc_pci_controller(void);
+extern struct resource *alloc_resource(void);
+
+extern struct pci_iommu_arena *iommu_arena_new_node(int,
+ struct pci_controller *,
+ dma_addr_t, unsigned long,
+ unsigned long);
+extern struct pci_iommu_arena *iommu_arena_new(struct pci_controller *,
+ dma_addr_t, unsigned long,
+ unsigned long);
+extern const char *const pci_io_names[];
+extern const char *const pci_mem_names[];
+extern const char pci_hae0_name[];
+
+extern unsigned long size_for_memory(unsigned long max);
+
+extern int iommu_reserve(struct pci_iommu_arena *, long, long);
+extern int iommu_release(struct pci_iommu_arena *, long, long);
+extern int iommu_bind(struct pci_iommu_arena *, long, long, unsigned long *);
+extern int iommu_unbind(struct pci_iommu_arena *, long, long);
+
+