Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late changes from Olof Johansson:
 "We were expecting to sit on this branch through most of the merge
  window since the contents was merged into our tree late, but we ended
  up sitting on all of our contents so it can go in with the rest.

  The contents here is:

   - a large branch of cleanups of the CM/PRM blocks on OMAP.

   - a couple of patches plumbing up CM/PRM on OMAP5 and DRA7.

   - a branch with DT updates for Freescale i.MX.  including some
     shuffling from .dts to .dtsi (include) files that causes a little
     churn"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (78 commits)
  ARM: OMAP2+: Fix booting with configs that don't have MFD_SYSCON
  ARM: OMAP4+: control: add support for initializing control module via DT
  ARM: dts: dra7: add minimal l4 bus layout with control module support
  ARM: dts: omap5: add minimal l4 bus layout with control module support
  ARM: OMAP4+: control: remove support for legacy pad read/write
  ARM: OMAP4: display: convert display to use syscon for dsi muxing
  ARM: dts: omap4: add minimal l4 bus layout with control module support
  ARM: dts: am4372: add minimal l4 bus layout with control module support
  ARM: dts: am43xx-epos-evm: fix pinmux node layout
  ARM: dts: am33xx: add minimal l4 bus layout with control module support
  ARM: dts: omap3: add minimal l4 bus layout with control module support
  ARM: dts: omap24xx: add minimal l4 bus layout with control module support
  ARM: OMAP2+: control: add syscon support for register accesses
  ARM: OMAP2+: id: cache omap_type value
  ARM: OMAP2+: control: remove API for getting control module base address
  ARM: OMAP2+: clock: add low-level support for regmap
  ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init
  ARM: OMAP4+: PRM: setup prm_features from the PRM init time flags
  ARM: OMAP2+: CM: move SoC specific init calls within a generic API
  ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility
  ...

1 files changed, 42 insertions, 42 deletions

diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 1d7109196872..795d68af6df9 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -69,7 +69,48 @@
 		};
 	};
 
-	am43xx_pinmux: pinmux@44e10800 {
+	matrix_keypad: matrix_keypad@0 {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <2>;
+
+		row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH		/* Bank0, pin12 */
+			     &gpio0 13 GPIO_ACTIVE_HIGH		/* Bank0, pin13 */
+			     &gpio0 14 GPIO_ACTIVE_HIGH		/* Bank0, pin14 */
+			     &gpio0 15 GPIO_ACTIVE_HIGH>;	/* Bank0, pin15 */
+
+		col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH		/* Bank3, pin9 */
+			     &gpio3 10 GPIO_ACTIVE_HIGH		/* Bank3, pin10 */
+			     &gpio2 18 GPIO_ACTIVE_HIGH		/* Bank2, pin18 */
+			     &gpio2 19 GPIO_ACTIVE_HIGH>;	/* Bank2, pin19 */
+
+		linux,keymap = <0x00000201	/* P1 */
+			0x01000204	/* P4 */
+			0x02000207	/* P7 */
+			0x0300020a	/* NUMERIC_STAR */
+			0x00010202	/* P2 */
+			0x01010205	/* P5 */
+			0x02010208	/* P8 */
+			0x03010200	/* P0 */
+			0x00020203	/* P3 */
+			0x01020206	/* P6 */
+			0x02020209	/* P9 */
+			0x0302020b	/* NUMERIC_POUND */
+			0x00030067	/* UP */
+			0x0103006a	/* RIGHT */
+			0x0203006c	/* DOWN */
+			0x03030069>;	/* LEFT */
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+};
+
+&am43xx_pinmux {
 		cpsw_default: cpsw_default {
 			pinctrl-single,pins = <
 				/* Slave 1 */
@@ -279,47 +320,6 @@
 				0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 			>;
 		};
-	};
-
-	matrix_keypad: matrix_keypad@0 {
-			compatible = "gpio-matrix-keypad";
-			debounce-delay-ms = <5>;
-			col-scan-delay-us = <2>;
-
-			row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH		/* Bank0, pin12 */
-				     &gpio0 13 GPIO_ACTIVE_HIGH		/* Bank0, pin13 */
-				     &gpio0 14 GPIO_ACTIVE_HIGH		/* Bank0, pin14 */
-				     &gpio0 15 GPIO_ACTIVE_HIGH>;	/* Bank0, pin15 */
-
-			col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH		/* Bank3, pin9 */
-				     &gpio3 10 GPIO_ACTIVE_HIGH		/* Bank3, pin10 */
-				     &gpio2 18 GPIO_ACTIVE_HIGH		/* Bank2, pin18 */
-				     &gpio2 19 GPIO_ACTIVE_HIGH>;	/* Bank2, pin19 */
-
-			linux,keymap = <0x00000201	/* P1 */
-				0x01000204	/* P4 */
-				0x02000207	/* P7 */
-				0x0300020a	/* NUMERIC_STAR */
-				0x00010202	/* P2 */
-				0x01010205	/* P5 */
-				0x02010208	/* P8 */
-				0x03010200	/* P0 */
-				0x00020203	/* P3 */
-				0x01020206	/* P6 */
-				0x02020209	/* P9 */
-				0x0302020b	/* NUMERIC_POUND */
-				0x00030067	/* UP */
-				0x0103006a	/* RIGHT */
-				0x0203006c	/* DOWN */
-				0x03030069>;	/* LEFT */
-		};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
 };
 
 &mmc1 {