diff options
| author | Boris Brezillon <boris.brezillon@free-electrons.com> | 2017-05-30 11:20:53 +0200 |
|---|---|---|
| committer | Alexandre Belloni <alexandre.belloni@free-electrons.com> | 2017-05-31 11:55:41 +0200 |
| commit | 1004a2977bdc7566bca87c565541c3232ed467c4 (patch) | |
| tree | ff3d3aca77c0e3288c6296263dd0795e60680478 /arch/arm/boot/dts/animeo_ip.dts | |
| parent | d9c41bf30cf8cea379f5947624e76c893791fec0 (diff) | |
ARM: dts: at91: Switch to the new NAND bindings
Use the new EBI/NAND bindings to declare NAND chips and remove old NAND
nodes along the way.
Note that we keep using old bindings in at91rm9200.dtsi because this
SoC is not supported by the EBI driver.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Diffstat (limited to 'arch/arm/boot/dts/animeo_ip.dts')
| -rw-r--r-- | arch/arm/boot/dts/animeo_ip.dts | 53 |
1 files changed, 36 insertions, 17 deletions
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index 9cc372b9fb9b..26ade8c0a960 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -83,25 +83,44 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; + ebi: ebi@10000000 { status = "okay"; - barebox@0 { - label = "barebox"; - reg = <0x0 0x58000>; - }; - - u_boot_env@58000 { - label = "u_boot_env"; - reg = <0x58000 0x8000>; - }; - - ubi@60000 { - label = "ubi"; - reg = <0x60000 0x1FA0000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + barebox@0 { + label = "barebox"; + reg = <0x0 0x58000>; + }; + + u_boot_env@58000 { + label = "u_boot_env"; + reg = <0x58000 0x8000>; + }; + + ubi@60000 { + label = "ubi"; + reg = <0x60000 0x1FA0000>; + }; + }; + }; }; }; |