ARM: dts: Add ethernet to a bunch of platforms

These platforms have the PHY defined already so we just
need to add a single device node to each of them to activate
the ethernet device.

The PHY skew/delay settings for pin control is known from a
few vendor trees and old OpenWRT patch sets.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 56 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts
index 943d2d07fac7..8bbb6f85d161 100644
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -129,6 +129,50 @@
 						groups = "gpio1dgrp";
 					};
 				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp";
+					};
+					/* Settings come from OpenWRT */
+					conf0 {
+						pins = "R8 GMAC0 RXDV", "U11 GMAC1 RXDV";
+						skew-delay = <0>;
+					};
+					conf1 {
+						pins = "T8 GMAC0 RXC", "T11 GMAC1 RXC";
+						skew-delay = <15>;
+					};
+					conf2 {
+						pins = "P8 GMAC0 TXEN", "V11 GMAC1 TXEN";
+						skew-delay = <7>;
+					};
+					conf3 {
+						pins = "V7 GMAC0 TXC";
+						skew-delay = <11>;
+					};
+					conf4 {
+						pins = "P10 GMAC1 TXC";
+						skew-delay = <10>;
+					};
+					conf5 {
+						/* The data lines all have default skew */
+						pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
+						       "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
+						       "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
+						       "R7 GMAC0 TXD2", "P7 GMAC0 TXD3",
+						       "R11 GMAC1 RXD0", "P11 GMAC1 RXD1",
+						       "V12 GMAC1 RXD2", "U12 GMAC1 RXD3",
+						       "R10 GMAC1 TXD0", "T10 GMAC1 TXD1",
+						       "U10 GMAC1 TXD2", "V10 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					/* Set up drive strength on GMAC0 to 16 mA */
+					conf6 {
+						groups = "gmii_gmac0_grp";
+						drive-strength = <16>;
+					};
+				};
 			};
 		};
 
@@ -143,6 +187,18 @@
 			pinctrl-0 = <&gpio1_default_pins>;
 		};
 
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
 		ata@63000000 {
 			status = "okay";
 		};