ARM: dts: Add support for the cpuimx27 board from Eukrea and its baseboard

This patch adds support for the cpuimx27 board from Eukrea and its
baseboard. This change is intended to further remove non-DT support
for this board.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

1 files changed, 274 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
new file mode 100644
index 000000000000..bb64ca1667f4
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -0,0 +1,274 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx27-eukrea-cpuimx27.dtsi"
+
+/ {
+	model = "Eukrea MBIMXSD27";
+	compatible = "eukrea,mbimxsd27-baseboard", "eukrea,cpuimx27", "fsl,imx27";
+
+	display0: CMO-QVGA {
+		model = "CMO-QVGA";
+		native-mode = <&timing0>;
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xfad08b80>;
+
+		display-timings {
+			timing0: 320x240 {
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <20>;
+				hsync-len = <30>;
+				hfront-porch = <38>;
+				vback-porch = <4>;
+				vsync-len = <3>;
+				vfront-porch = <15>;
+			};
+		};
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioleds>;
+
+		led1 {
+			label = "system::live";
+			gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "system::user";
+			gpios = <&gpio6 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-bus";
+
+		reg_lcd: regulator@0 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcdreg>;
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "LCD";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
+
+&cspi1 {
+	pinctrl-0 = <&pinctrl_cspi1>;
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	ads7846 {
+		compatible = "ti,ads7846";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		reg = <0>;
+		interrupts = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
+		spi-cpol;
+		spi-max-frequency = <1500000>;
+		ti,keep-vref-on;
+	};
+};
+
+&fb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_imxfb>;
+	display = <&display0>;
+	lcd-supply = <&reg_lcd>;
+	fsl,dmacr = <0x00040060>;
+	fsl,lscr1 = <0x00120300>;
+	fsl,lpccr = <0x00a903ff>;
+	status = "okay";
+};
+
+&i2c1 {
+	codec: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&kpp {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_UP)
+		MATRIX_KEY(0, 1, KEY_DOWN)
+		MATRIX_KEY(1, 0, KEY_RIGHT)
+		MATRIX_KEY(1, 1, KEY_LEFT)
+	>;
+	status = "okay";
+};
+
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ssi1>;
+	fsl,mode = "i2s-slave";
+	codec-handle = <&codec>;
+	status = "okay";
+};
+
+&uart1 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx27-eukrea-cpuimx27-baseboard {
+		pinctrl_cspi1: cspi1grp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_MISO__CSPI1_MISO	0x0
+				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI	0x0
+				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK	0x0
+				MX27_PAD_CSPI1_SS0__GPIO4_28	0x0 /* CS0 */
+			>;
+		};
+
+		pinctrl_backlight: backlightgrp {
+			fsl,pins = <
+				MX27_PAD_PWMO__GPIO5_5		0x0
+			>;
+		};
+
+		pinctrl_gpioleds: gpioledsgrp {
+			fsl,pins = <
+				MX27_PAD_PC_PWRON__GPIO6_16	0x0
+				MX27_PAD_PC_CD2_B__GPIO6_19	0x0
+			>;
+		};
+
+		pinctrl_imxfb: imxfbgrp {
+			fsl,pins = <
+				MX27_PAD_LD0__LD0		0x0
+				MX27_PAD_LD1__LD1		0x0
+				MX27_PAD_LD2__LD2		0x0
+				MX27_PAD_LD3__LD3		0x0
+				MX27_PAD_LD4__LD4		0x0
+				MX27_PAD_LD5__LD5		0x0
+				MX27_PAD_LD6__LD6		0x0
+				MX27_PAD_LD7__LD7		0x0
+				MX27_PAD_LD8__LD8		0x0
+				MX27_PAD_LD9__LD9		0x0
+				MX27_PAD_LD10__LD10		0x0
+				MX27_PAD_LD11__LD11		0x0
+				MX27_PAD_LD12__LD12		0x0
+				MX27_PAD_LD13__LD13		0x0
+				MX27_PAD_LD14__LD14		0x0
+				MX27_PAD_LD15__LD15		0x0
+				MX27_PAD_LD16__LD16		0x0
+				MX27_PAD_LD17__LD17		0x0
+				MX27_PAD_CONTRAST__CONTRAST	0x0
+				MX27_PAD_OE_ACD__OE_ACD		0x0
+				MX27_PAD_HSYNC__HSYNC		0x0
+				MX27_PAD_VSYNC__VSYNC		0x0
+			>;
+		};
+
+		pinctrl_lcdreg: lcdreggrp {
+			fsl,pins = <
+				MX27_PAD_CLS__GPIO1_25		0x0
+			>;
+		};
+
+		pinctrl_sdhc1: sdhc1grp {
+			fsl,pins = <
+				MX27_PAD_SD1_CLK__SD1_CLK	0x0
+				MX27_PAD_SD1_CMD__SD1_CMD	0x0
+				MX27_PAD_SD1_D0__SD1_D0		0x0
+				MX27_PAD_SD1_D1__SD1_D1		0x0
+				MX27_PAD_SD1_D2__SD1_D2		0x0
+				MX27_PAD_SD1_D3__SD1_D3		0x0
+			>;
+		};
+
+		pinctrl_ssi1: ssi1grp {
+			fsl,pins = <
+				MX27_PAD_SSI4_CLK__SSI4_CLK	0x0
+				MX27_PAD_SSI4_FS__SSI4_FS	0x0
+				MX27_PAD_SSI4_RXDAT__SSI4_RXDAT	0x1
+				MX27_PAD_SSI4_TXDAT__SSI4_TXDAT	0x1
+			>;
+		};
+
+		pinctrl_touch: touchgrp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_RDY__GPIO4_25	0x0 /* IRQ */
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD	0x0
+				MX27_PAD_UART1_RXD__UART1_RXD	0x0
+				MX27_PAD_UART1_CTS__UART1_CTS	0x0
+				MX27_PAD_UART1_RTS__UART1_RTS	0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX27_PAD_UART2_TXD__UART2_TXD	0x0
+				MX27_PAD_UART2_RXD__UART2_RXD	0x0
+				MX27_PAD_UART2_CTS__UART2_CTS	0x0
+				MX27_PAD_UART2_RTS__UART2_RTS	0x0
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX27_PAD_UART3_TXD__UART3_TXD	0x0
+				MX27_PAD_UART3_RXD__UART3_RXD	0x0
+				MX27_PAD_UART3_CTS__UART3_CTS	0x0
+				MX27_PAD_UART3_RTS__UART3_RTS	0x0
+			>;
+		};
+	};
+};