diff options
| author | Maxime Ripard <maxime.ripard@free-electrons.com> | 2012-11-03 16:59:07 +0100 |
|---|---|---|
| committer | Shawn Guo <shawn.guo@linaro.org> | 2012-11-05 10:53:24 +0800 |
| commit | c241d0a3ba78d50da08bd0c8236433b7653a86c7 (patch) | |
| tree | b1dea6132e22fc46467d1da37b34c06f023e0458 /arch/arm/boot/dts/imx28-cfa10036.dts | |
| parent | a4dabca8b474aa5cf7ec1bec5bc1904a5e18f642 (diff) | |
ARM: dts: cfa10036: Use pinctrl for power led
The leds-gpio driver recently got pinctrl support, so setup the power
led gpio muxing through pinctrl.
This avoids the warning:
leds-gpio leds.X: pins are not configured from the driver
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/imx28-cfa10036.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx28-cfa10036.dts | 14 |
1 files changed, 14 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts index c03a577beca3..3a2807743985 100644 --- a/arch/arm/boot/dts/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -22,6 +22,18 @@ apb@80000000 { apbh@80000000 { + pinctrl@80018000 { + led_pins_cfa10036: leds-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3043 /* MX28_PAD_AUART1_RX__GPIO_3_4 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + ssp0: ssp@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; @@ -43,6 +55,8 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_cfa10036>; power { gpios = <&gpio3 4 1>; |