diff options
author | Oleksandr Suvorov <oleksandr.suvorov@toradex.com> | 2021-03-29 00:02:08 +0300 |
---|---|---|
committer | Oleksandr Suvorov <oleksandr.suvorov@toradex.com> | 2021-04-05 19:00:38 +0300 |
commit | e126d9d3bbb3b7d553847f17694652bd3c6209c1 (patch) | |
tree | e04e218d7e066df40e98a158b3a4d24d463af154 /arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi | |
parent | fc386214b3bc1bfaacf684edfe939bd6e1deb316 (diff) |
ARM: dts: colibri-imx7: prepare for LVDS transceiver overlay
Add the pinmux group for LVDS transceiver related signals to use it
in an overlay.
Fix pinmux default values for these pins.
Enable the LVDS transceiver for NAND modules on a board
Iris v2.0A by default.
Related-to: ELB-3898
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Diffstat (limited to 'arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi')
-rw-r--r-- | arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi | 8 |
1 files changed, 0 insertions, 8 deletions
diff --git a/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi b/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi index 4904edbcf39a..f5d13ab57c46 100644 --- a/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi +++ b/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi @@ -146,14 +146,6 @@ }; }; -&gpio7 { - lvds_tx_on { - gpio-hog; - gpios = <11 0>; /* SODIMM 99 */ - output-high; - }; -}; - /* The define SD_1_8 allows to use the SD interface at a higher speed mode * if the card supports it. For this the signaling voltage is switched from * 3.3V to 1.8V under the usdhc1's drivers control. |