diff options
author | Fancy Fang <chen.fang@nxp.com> | 2016-06-30 13:38:39 +0800 |
---|---|---|
committer | Fancy Fang <chen.fang@nxp.com> | 2016-06-30 16:53:04 +0800 |
commit | 77f61547834c4f127b44b13e43c59133a35880dc (patch) | |
tree | ccbd3860739c1321f9876212545841128631aaff /arch/arm/boot/dts/imx7d-sdb.dts | |
parent | 042fabde578b14aff53d32e5a086debe6a17abc0 (diff) |
MLK-12948 ARM: dts: imx7d-sdb: change the hardware reset gpio for mipi dsirel_imx_4.1.15_1.2.0_ga
Change the hardware reset gpio to 'GPIO6_IO15' for mipi dsi to
allow fec2 and mipi dsi can run at the same time. This needs
some hardware rework as follows:
"
1. Replace R631 with 100K resistor;
2. Remove D14, D24;
3. Solder the Cathode of the diode to R471,
you can use BAT54HT1(ONSEMI) or NSR0320MW2T1G(ONSEMI);
4. Solder the wire to the Anode end of the diode;
5. Scrape the solder mask(Green oil) of the MIPI Reset via,
then solder the end of the wire to the via.
"
Signed-off-by: Fancy Fang <chen.fang@nxp.com>
(cherry picked from commit 0af28564e73f006f742a9af0db4bc5b8588e3490)
Diffstat (limited to 'arch/arm/boot/dts/imx7d-sdb.dts')
-rw-r--r-- | arch/arm/boot/dts/imx7d-sdb.dts | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 6d896bdd5b82..09089bbb3d23 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -562,6 +562,12 @@ >; }; + pinctrl_mipi_dsi_reset: mipi_dsi_reset_grp { + fsl,pins = < + MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15 0x1b + >; + }; + pinctrl_ecspi3_cs: ecspi3_cs_grp { fsl,pins = < MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x80000000 |