summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
diff options
context:
space:
mode:
authorAndrew Lunn <andrew@lunn.ch>2014-09-01 19:35:41 +0200
committerJason Cooper <jason@lakedaemon.net>2014-09-13 21:03:48 +0000
commit4f5e01e96d424b54f5f0e89ee1ba9ccca03a3941 (patch)
treecbd14ae3267554ddb788f4ba1d9ae8e0834c1040 /arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
parent500abb6ccb9e3f8d638a7f422443a8549245ef90 (diff)
ARM: Kirkwood: Fix DT based DSA.
During the conversion of boards to use DT to instantiate Distributed Switch Architecture, nobody volunteered to test. As to be expected, the conversion was flawed. Testers and access to hardware has now become available, and this patch hopefully fixes the problems. dsa,mii-bus must be a phandle to the top level mdio node, not the port specific subnode of the mdio device. dsa,ethernet must be a phandle to the port subnode within the ethernet DT node, not the ethernet node. Don't pinctrl hog the card detect gpio for mvsdio. Rename the .dts files to make it clearer which file is for the Z0 stepping and which for the A0 or later stepping. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: seugene@marvell.com Tested-by: Eugene Sanivsky <seugene@marvell.com> Fixes: e2eaa339af44: ("ARM: Kirkwood: convert rd88f6281-setup.c to DT.") Fixes: e7c8f3808be8: ("ARM: kirkwood: Convert mv88f6281gtw_ge switch setup to DT") Cc: <stable@vger.kernel.org> #v3.15+ Link: https://lkml.kernel.org/r/1409592941-22244-1-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Diffstat (limited to 'arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts')
-rw-r--r--arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts16
1 files changed, 6 insertions, 10 deletions
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
index 8f76d28759a3..f82827d6fcff 100644
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -123,11 +123,11 @@
dsa@0 {
compatible = "marvell,dsa";
- #address-cells = <2>;
+ #address-cells = <1>;
#size-cells = <0>;
- dsa,ethernet = <&eth0>;
- dsa,mii-bus = <&ethphy0>;
+ dsa,ethernet = <&eth0port>;
+ dsa,mii-bus = <&mdio>;
switch@0 {
#address-cells = <1>;
@@ -169,17 +169,13 @@
&mdio {
status = "okay";
-
- ethphy0: ethernet-phy@ff {
- reg = <0xff>; /* No phy attached */
- speed = <1000>;
- duplex = <1>;
- };
};
&eth0 {
status = "okay";
+
ethernet0-port@0 {
- phy-handle = <&ethphy0>;
+ speed = <1000>;
+ duplex = <1>;
};
};