Merge tag 'omap-for-v4.6/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Device tree changes for omaps for v4.6 merge window. Mostly just
adding board specific devices and few new boards:

- N900 improvments for adp1653 and gpio keys

- Add missing bandgap data for omap3

- Add more devices for compulab cm-t335

- Add n950 WLAN support, enable modem, add pinctrl for SSI

- Correct dm814x and dra62x auxclk rate, add support for GPMC and NAND

- Add syscon node for PHY's on dra7

- Add support more devices on logicpd torpedo

- Add USB host support for igep and specify boot console

- Fix audio clock for am335x-sl50 and specify boot console

- Remove deprecated tx-fifo-resize for dwc3 that was only used on
  omap5 es1.0

- Add dra7 thermal data

- Update am43x-epos-evm compatible string to am438

- Add support for logicpd dm3730 som-lv

* tag 'omap-for-v4.6/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (38 commits)
  ARM: dts: am57xx-beagle-x15: Add eeprom information
  ARM: dts: Add HSUSB2 EHCI Support to Logic PD DM37xx SOM-LV
  ARM: dts: n900: Use linux input defines instead hardcoded constants
  ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV
  ARM: dts: omap3logic: Add PWM-Backlight
  ARM: dts: omap3-n900: Allow gpio keys to be disabled
  ARM: dts: am43x-epos-evm: Add the am438 compatible string
  ARM: dts: DRA7: Add missing IVA and DSPEVE thermal domain data
  ARM: dts: DRA7: Add IVA thermal data
  ARM: dts: DRA7: Add DSPEVE thermal data
  ARM: dts: remove deprecated property dwc3
  ARM: dts: OMAP3-N950-N9: Add ssi idle pinctrl state
  ARM: dts: am335x-sl50: Fix audio codec setup.
  ARM: dts: am335x-sl50: Specify the device to be used for boot console output.
  ARM: dts: omap3-igep0030-common: Add USB Host support
  ARM: dts: igep00x0: Specify the device to be used for boot console output.
  ARM: dts: LogicPD Torpedo: Set HSUSB0 Pin Mux
  ARM: dts: OMAP3-N950-N9: Enable modem
  ARM: dts: OMAP3-N950-N9: Enable SSI module
  ARM: dts: LogicPD Torpedo: Add SPI EEPROM
  ...

1 files changed, 35 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
index 00805322367e..02e161d119fb 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -110,6 +110,11 @@
 
 &i2c3 {
 	clock-frequency = <400000>;
+	at24@50 {
+		compatible = "at24,24c02";
+		readonly;
+		reg = <0x50>;
+	};
 };
 
 /*
@@ -167,6 +172,31 @@
 			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* GPIO_162,BT_EN */
 		>;
 	};
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)        /* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+	hsusb_otg_pins: pinmux_hsusb_otg_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
+
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
+		>;
+	};
 };
 
 &uart2 {
@@ -175,6 +205,11 @@
 	pinctrl-0 = <&uart2_pins>;
 };
 
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+};
+
 &omap3_pmx_core2 {
 	mmc3_core2_pins: pinmux_mmc3_core2_pins {
 		pinctrl-single,pins = <