diff options
| author | Sebastian Reichel <sre@kernel.org> | 2016-01-17 16:49:06 +0100 |
|---|---|---|
| committer | Tony Lindgren <tony@atomide.com> | 2016-02-12 14:26:02 -0800 |
| commit | 3bec8c81fc8e9dfb74c1c4ec7499013fdeb80c76 (patch) | |
| tree | 9ca128268bfcb00fa9729e280690e49bf31a0d4a /arch/arm/boot/dts/omap3-n950-n9.dtsi | |
| parent | 40d5cb207e69718ef25f4463c53a1332d7663ce8 (diff) | |
ARM: dts: OMAP3-N950-N9: Enable SSI module
The Nokia N950 and Nokia N9 have a modem attached to their
first ssi port. This change adds all necessary information
to initialize the SSI module, but does not yet add the
modem information.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/boot/dts/omap3-n950-n9.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/omap3-n950-n9.dtsi | 24 |
1 files changed, 24 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index ab1174bb409e..e89a40e10948 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -59,6 +59,19 @@ OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 - wlan irq */ >; }; + + ssi_pins: pinmux_ssi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ + OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ + OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ + OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ + OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */ + OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */ + >; + }; }; &i2c1 { @@ -206,3 +219,14 @@ }; }; }; + +&ssi_port1 { + pinctrl-names = "default"; + pinctrl-0 = <&ssi_pins>; + + ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */ +}; + +&ssi_port2 { + status = "disabled"; +}; |