summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/r8a7790-lager.dts
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-02-17 09:36:52 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2015-02-17 09:36:52 -0800
commita233bb742aed62fc6164073d9835135f639b8828 (patch)
tree4cec22b707a29a52f9946da6393c9580221d0a6e /arch/arm/boot/dts/r8a7790-lager.dts
parent878ba61aa98cbb97a513757800e77613f856a029 (diff)
parent880c0d140deb12d5be39a96375fcc42ad357f17d (diff)
Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC DT updates from Olof Johansson: "DT changes continue to be the bulk of our merge window contents. We continue to have a large set of changes across the board as new platforms and drivers are added. Some of the new platforms are: - Alphascale ASM9260 - Marvell Armada 388 - CSR Atlas7 - TI Davinci DM816x - Hisilicon HiP01 - ST STiH418 There have also been some sweeping changes, including relicensing of DTS contents from GPL to GPLv2+/X11 so that the same files can be reused in other non-GPL projects more easily. There's also been changes to the DT Makefile to make it a little less conflict-ridden and churny down the road" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits) ARM: dts: Add PPMU node for exynos4412-trats2 ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato ARM: dts: Add PPMU dt node for exynos4 and exynos4210 ARM: dts: Add PPMU dt node for exynos3250 ARM: dts: add mipi dsi device node for exynos4415 ARM: dts: add fimd device node for exynos4415 ARM: dts: Add syscon phandle to the video-phy node for Exynos4 ARM: dts: Add sound nodes for exynos4412-trats2 ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2 ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi ARM: dts: Add max77693 charger node for exynos4412-trats2 ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2 ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2 ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2 ARM: dts: am57xx-beagle-x15: Fix USB2 mode ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB ARM: dts: dra72-evm: Add extcon nodes for USB ARM: dts: dra7-evm: Add extcon nodes for USB ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb ...
Diffstat (limited to 'arch/arm/boot/dts/r8a7790-lager.dts')
-rw-r--r--arch/arm/boot/dts/r8a7790-lager.dts15
1 files changed, 9 insertions, 6 deletions
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 4118030f366d..0c3b6783b72a 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -355,7 +355,7 @@
phy-handle = <&phy1>;
renesas,ether-link-active-low;
- status = "ok";
+ status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
@@ -366,7 +366,7 @@
};
&cmt0 {
- status = "ok";
+ status = "okay";
};
&mmcif1 {
@@ -397,6 +397,8 @@
spi-max-frequency = <30000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
+ spi-cpha;
+ spi-cpol;
m25p,fast-read;
partition@0 {
@@ -470,17 +472,17 @@
};
&iic0 {
- status = "ok";
+ status = "okay";
};
&iic1 {
- status = "ok";
+ status = "okay";
pinctrl-0 = <&iic1_pins>;
pinctrl-names = "default";
};
&iic2 {
- status = "ok";
+ status = "okay";
pinctrl-0 = <&iic2_pins>;
pinctrl-names = "default";
@@ -562,7 +564,7 @@
pinctrl-0 = <&vin1_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
port {
#address-cells = <1>;
@@ -579,6 +581,7 @@
pinctrl-0 = <&sound_pins &sound_clk_pins>;
pinctrl-names = "default";
+ /* Single DAI */
#sound-dai-cells = <0>;
status = "okay";