diff options
| author | Douglas Anderson <dianders@chromium.org> | 2019-06-19 11:34:25 -0700 |
|---|---|---|
| committer | Heiko Stuebner <heiko@sntech.de> | 2019-06-26 23:58:55 +0200 |
| commit | 4db11c378ab1e170c3a197ea3719ffe54cd06637 (patch) | |
| tree | a6b19038273ee2684d226730e7d24c420262ef93 /arch/arm/boot/dts/rk3288-veyron.dtsi | |
| parent | f497ab6b4bb813aca439b7f3a72a060b58b147c4 (diff) | |
ARM: dts: rockchip: Configure BT_DEV_WAKE in on rk3288-veyron
This is the other half of the hacky solution from commit f497ab6b4bb8
("ARM: dts: rockchip: Configure BT_HOST_WAKE as wake-up signal on
veyron"). Specifically the LPM driver that the Broadcom Bluetooth
expects to have (but is missing in mainline) has two halves of the
equation: BT_HOST_WAKE and BT_DEV_WAKE. The BT_HOST_WAKE (which was
handled in the previous commit) is the one that lets the Bluetooth
wake the system up. The BT_DEV_WAKE (this patch) tells the Bluetooth
that it's OK to go into a low power mode. That means we were burning
a bit of extra power in S3 without this patch. Measurements are a bit
noisy, but it appears to be a few mA worth of difference.
NOTE: Though these pins don't do much on systems with Marvell
Bluetooth, downstream kernels set it on all veyron boards so we'll do
the same.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Diffstat (limited to 'arch/arm/boot/dts/rk3288-veyron.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/rk3288-veyron.dtsi | 20 |
1 files changed, 20 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index e2635ad574e7..53d2f2452868 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -485,12 +485,18 @@ &ddr0_retention &ddrio_pwroff &global_pwroff + + /* Wake only */ + &bt_dev_wake_awake >; pinctrl-1 = < /* Common for sleep and wake, but no owners */ &ddr0_retention &ddrio_pwroff &global_pwroff + + /* Sleep only */ + &bt_dev_wake_sleep >; pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { @@ -596,6 +602,20 @@ sdio0_clk: sdio0-clk { rockchip,pins = <4 RK_PD1 1 &pcfg_pull_none_drv_8ma>; }; + + /* + * These pins are only present on very new veyron boards; on + * older boards bt_dev_wake is simply always high. Note that + * gpio4_D2 is a NC on old veyron boards, so it doesn't hurt + * to map this pin everywhere + */ + bt_dev_wake_sleep: bt-dev-wake-sleep { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_low>; + }; + + bt_dev_wake_awake: bt-dev-wake-awake { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_high>; + }; }; tpm { |