diff options
| author | Boris Brezillon <boris.brezillon@free-electrons.com> | 2017-05-30 11:20:53 +0200 |
|---|---|---|
| committer | Alexandre Belloni <alexandre.belloni@free-electrons.com> | 2017-05-31 11:55:41 +0200 |
| commit | 1004a2977bdc7566bca87c565541c3232ed467c4 (patch) | |
| tree | ff3d3aca77c0e3288c6296263dd0795e60680478 /arch/arm/boot/dts/sama5d4.dtsi | |
| parent | d9c41bf30cf8cea379f5947624e76c893791fec0 (diff) | |
ARM: dts: at91: Switch to the new NAND bindings
Use the new EBI/NAND bindings to declare NAND chips and remove old NAND
nodes along the way.
Note that we keep using old bindings in at91rm9200.dtsi because this
SoC is not supported by the EBI driver.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Diffstat (limited to 'arch/arm/boot/dts/sama5d4.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/sama5d4.dtsi | 31 |
1 files changed, 0 insertions, 31 deletions
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index de6bcff87745..2fa36c525957 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -312,37 +312,6 @@ }; }; - nand0: nand@80000000 { - compatible = "atmel,sama5d4-nand", "atmel,at91rm9200-nand"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - reg = < 0x80000000 0x08000000 /* EBI CS3 */ - 0xfc05c070 0x00000490 /* SMC PMECC regs */ - 0xfc05c500 0x00000100 /* SMC PMECC Error Location regs */ - >; - interrupts = <22 IRQ_TYPE_LEVEL_HIGH 6>; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; - atmel,nand-has-dma; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - status = "disabled"; - - nfc@90000000 { - compatible = "atmel,sama5d3-nfc"; - #address-cells = <1>; - #size-cells = <1>; - reg = < - 0x90000000 0x08000000 /* NFC Command Registers */ - 0xfc05c000 0x00000070 /* NFC HSMC regs */ - 0x00100000 0x00100000 /* NFC SRAM banks */ - >; - clocks = <&hsmc_clk>; - atmel,write-by-sram; - }; - }; - nfc_io: nfc-io@90000000 { compatible = "atmel,sama5d3-nfc-io", "syscon"; reg = <0x90000000 0x8000000>; |